Used Fliegl Dhka Semitrailers for sale (315)

Condition: used, maximum load weight: 30,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2019, next inspection (TÜV): 06/2025, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,380 mm, Equipment: ABS, Fliegl DHKA 390 SDS01 30m³ Rear Tipper Aluminum Body Light 3-axle rear tipping semi-trailer with lightweight aluminum body, Type DHKA 390 – 30 m³ with attached rear tailgate, Greenline----### Aluminum Body Light / Aluminum Box Body ###---- Aluminum tipping body, Capacity: approx. 30 m³, Fifth wheel height: approx. 1,200 mm, Gross vehicle weight rating (GVWR): 35,000 kg, Unladen weight: 4,800 kg, Payload: 30,200 kg, 1st axle liftable, Roll tarp, foldable to the front-right side, with central locking to the front-left, 2x LED work lights at rear, SAF axles, Steel standing platform with anti-slip grate and safety railing, Hard-chromed tipping cylinder, Rear underrun protection, foldable, 1x drop-down support leg, Disc brakes, Broom and shovel holder mounted on front wall, Air suspension, Pendulum tailgate, mechanically locked (2-hook locking), Pendulum tailgate/rear wall sealed with rubber gasket, Side wall locking with screw fasteners, 1x grain slide, 1x side storage compartment on the left, 1x front storage compartment, Mudguards on all wheels, Loading platform dimensions (LxWxH): approx. 7,200 x 2,420 x 1,750 mm, Side wall height: approx. 1,750 mm, Loading height: approx. 3,239 mm, External dimensions (LxWxH): approx. 8,600 x 2,550 x 3,340 mm, Wheelbase: 3,100 x 1,310 x 1,320 mm, Tyres: 385/65R 22.5 on aluminum rims, Tread depth tyres left front: 14 mm, Tread depth tyres left center: 14 mm, Tread depth tyres left rear: 4 mm, Tread depth tyres right front: 12 mm, Tread depth tyres right center: 15 mm, Tread depth tyres right rear: 12 mm, Tipping floor worn Additional equipment: Overall length: approx. 8,600 mm, Overall width: approx. 2,550 mm, Overall height: approx. 3,340 mm, Internal body height: approx. 1,750 mm, Capacity: approx. 30 m³, Fifth wheel height: approx. 1,200 mm, Frame neck height: approx. 190 mm, King pin mounting dimension: approx. 600 mm, Central telescopic support, Uncoupling when loaded not possible; when uncoupled, the vehicle must be positioned sloping rearward, Rear underrun protection, foldable, Half-shell mudguards, Tarp pole with holder, Aluminium ladder approx. 3,550 mm with side holder, SAF disc brake axles, Air suspension, 1st axle automatic lift axle, additionally electrically operated from the truck, with start-off aid, truck installation not necessary (start-off aid functional up to axle overload of 30% and max. speed of 25 km/h), Spring-loaded parking brake, Cjdpjwr Ry Esfx Aaxsrb EBS, Electronic Braking System with EBS socket at front, without connection cable, Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! 24 volt, 4x 3-chamber rear lights + 1 round reverse light + 1 round rear fog light, all LED, 2 white position lights at front, 1x 15-pin socket at front, without connection cable, Low-pressure cylinder max. 170 bar, with HDK screw coupling, fixed, NW 48 mm, Hard-chromed tipping cylinder, Bodies: Aluminum box body made from high-quality, wear-resistant material, Sloped front wall, 5 mm thick, With external cylinder mount, Side walls of 30 mm hollow chamber profiles, precisely welded, With bulk material deflecting upper rail profile, Greenline – conical, aerodynamic body shape, 'membrane' rear wall, Rear wall as pendulum tailgate, externally mounted with double hook locking, Rear wall with additional clamping bolts at the sides and bottom, Rear wall with rubber gasket, Note: Heat-resistant up to max. 170°C!, Central grain chute, Continuous floor 6 mm t

Condition: used, maximum load weight: 27,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2011, loading space length: 9,600 mm, loading space width: 2,340 mm, loading space height: 2,230 mm, loading space volume: 56 m³, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, Steel rear tipper body approx. 56 cbm, loading area (L): bottom - 10,000 mm, top - 10,730 mm, double wing door with rotary bolt lock at rear, grain chute, roll tarp, Jost landing gears, SAF INTRA axle(s), ABS, EBS, lift axle, air suspension with lifting and lowering device. The vehicle may have advertising stickers and/or lettering. Credpfx Aasw Ndmlsxob SI86147 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We would be pleased to prepare a financing or leasing offer for this item. Please contact us!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902031174, empty load weight: 5,835 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2026, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R22.5, color: grey, Year of construction: 2023, The images shown are archive photos. The vehicle may still be in use. Chassis Tipping Semi-Trailer Fine-grained steel welded construction in Basic lightweight design, fifth wheel plate with replaceable 2" king pin Curved front wall (patented) 24 t 2-speed support legs, single-sided operation, with straight base, without compensating rod 2x wheel chocks with holder Aluminium side underrun protection Rear under-run protection, foldable 6x half-shell mudguards Integrated mudguard holders with stone-repellent surface Tarpaulin rod with bracket 2x rear towing hooks Axles & Suspension BPW disc brake axles "Axle/chassis laser alignment" reduces tyre wear and fuel consumption Air suspension 1st axle with automatic lift, including forced lowering and starting aid, operated by '3x brake' application Braking System 2-line compressed air braking system Colour-coded routing for easy servicing Spring-type parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS (Electronic Braking System) with EBS socket at the front, without connection cable Note: This trailer must only be towed by tractor vehicles that ensure ABS functionality! With lift & lower valve Vehicle stability control system Crjdpfx Aey Efcueaxjb Wheels and Tyres 6x 385/65 R22.5" tyres 6x steel rims Electrics 24 Volt, multi-chamber lights, side yellow LED lighting 2 white marker lights at front 2 white/red lane marker lights at rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Tipping Body Aluminium box body made of high-quality, abrasion-resistant material Sloped 5 mm thick front wall with external cylinder mounting Side walls made of 30 mm hollow chamber profiles, clean welded, with bulk material deflecting top rail. Internal ladder at the front wall Shovel and broom holders outside front wall Rear wall with pendulum mounting and 'double-joint' hinges, with 2-winged door split 1/2 to 1/2, upper swing beam, with one grain slide per door Rear wall with rubber seal 6 mm continuous floor Standing platform with access, connecting plate for air/electric/brake Roll tarp can be stowed one side (FR-right), with central locking (FR-left) Operating Notes For transporting salt, lime, etc., we recommend a tipping cylinder with a hard chrome-plated piston rod to prevent corrosion and damage from the material. The total weight stated is technically possible; depending on the cargo, the full weight may not be achievable within the permissible axle/support/saddle loads (incorrect load distribution may result in poor handling and tracking). Note! Not suitable for chemically aggressive substances (e.g., acids, chlorine compounds, sulphur compounds, alternative fuels); such substances can cause stress corrosion cracking and extreme cracking in the body when combined with moisture on the body surface! Vehicles with load bodies are intended for chemically non-aggressive cargo. Use for transporting aggressive goods such as acids, bases, salts, fertilizers, sewage sludge, and household waste is at the operator's own risk. This can result in damage such as stress corrosion cracking or pitting. Archive images are shown!

Condition: used, functionality: limited functionality, machine/vehicle number: WFDFLT33902030053, empty load weight: 7,965 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2023, next inspection (TÜV): 08/2026, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,540 mm, suspension: air, tire size: 385/65 R22.5, color: grey, Year of construction: 2023, The images shown are archive photos. The vehicle may still be in use. Chassis - Tipper Semi-Trailer Fine-grained steel welded construction, in basic lightweight design, fifth wheel plate with replaceable 2" king pin Patent-protected curved front end 24 t 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation Foldable underrun protection Axles & Suspension 3x BPW disc brake axles with 430 mm disc diameter "Axles/chassis laser measured" - reduces tire wear and fuel consumption Air suspension 1st axle with automatic lift function, including forced lowering and traction assistance, activated by "brake 3 times" (traction assist is operational up to a 30% axle load exceedance and a maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking System 2-line compressed air braking system Spring actuated parking brake 2 front interchangeable coupling heads, without connecting hose EBS - Electronic Braking System with EBS socket at front, without connection cable Attention: This trailer may only be towed by tractor units that ensure full ABS functionality! With lift & lower valve Vehicle - Driving Stability System Wheels and Tyres 6x 385/65 R22.5" tyres 6x steel rims Electrical System 24 Volt, multi-chamber lights, LED side marker lights (amber) 2 x 7-pin interchangeable sockets at the front, without connection cable, electrics not fully functional. Hydraulics Codpfxsy Edtfe Aaxjrb Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm. (without hose connection) Body Aluminum box body made of high-quality, wear-resistant material. Sloped bulkhead, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, precision-welded, with upper rail profile for protection against bulk cargo. Interior access on the front wall (not in combination with Cramaro cover). Shovel and broom holder on front wall exterior. Greenline - conical and aerodynamic body design "Membrane" tailgate Rear wall suspended with "double hinge" and split 1/2 to 1/2 two-wing door, swing arm on top, with one grain slide per door. Floor plate continuous, 6 mm thick Standing platform with access, connector plate for air/electricity and brakes, with spacious area for maximum operability. Roll tarp can be opened to the right (FR-right) and locked on the left (FR-left) with central locking. Operational Notices For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to prevent material corrosion and rusting. The stated gross weight is technically possible. Depending on the type of load, the gross weight may not be achievable within the permissible axle, support, and fifth wheel loads. Note! Not suitable for chemically aggressive materials (e.g. acids, chlorine compounds, sulfur compounds, "refuse-derived fuels"); such substances can cause stress corrosion cracking on damp body surfaces, potentially resulting in severe fracturing of the body structure. Vehicles with loading bodies are designed for non-chemically aggressive loads. Transporting aggressive substances such as acids, bases, salts, fertilizers, sewage sludge, and household waste is at your own risk. This may lead to stress cracks or pitting corrosion damage. The images shown are archive photos. The vehicle may still be in use.

Condition: used, empty load weight: 5,933 kg, maximum load weight: 29,067 kg, overall weight: 35,000 kg, axle configuration: 3 axles, Condition - Very well-maintained vehicle from first owner Category - Semi-trailer Model - FLIEGL DHKA 350 - 35,000 kg Registration Month - 02 Cedpfjwk Ux Nox Aaxsrb Registration Year - 2013 Gross weight (kg) – 35,000 Unladen weight (kg) – 5,933 Payload (kg) – 29,067 Colour - Silver Number of axles - 3 Maintenance - Inspection record Commercial/Export - Net price in € - 19,990 Subject to prior sale, changes, and errors Phone +49 551 50 84 912 According to manufacturer: Axles and Suspension SAF disc brake axles with 370 mm disc diameter; air suspension with raise/lower function; 1st axle is an automatic lift axle, includes forced lowering and starting aid, actuation by 'brake 3x' (starting aid is operational up to axle load exceedance of 30% and up to a maximum speed of 25 km/h) Chassis Special lightweight steel welded construction; fifth wheel plate with replaceable 2” kingpin Support legs Not equipped Tyres/Wheels 385 / 65 R 22.5”, manufacturer’s choice; polished aluminium rims, manufacturer’s choice Braking system 2-line brake system per EC regulation; EBS; 2 non-interchangeable coupling heads; spring-actuated parking brake; without connecting cable Electrics 24 Volt, multi-chamber rear lights; 2 x 7-pin non-interchangeable sockets; lighting per EC regulation; without connecting cable Hydraulics Low-pressure cylinder max. 170 bar with HDK threaded coupling; fixed section, NW 48 mm (without hose connection) Body Aluminium floor made of high-quality, abrasion-resistant material, 5 mm thick, Brinell 110, reinforced with U-profiles; side walls in hollow chamber profiles, precisely welded, with upper rail profile for bulk material shedding; front wall slanted, rear wall as pendulum tailgate with double-joint hinge, exterior mounting with double hook lock. Note! Suitable only for the transport of sand, gravel, and rolled chippings with a maximum grain size of up to 20 mm! All other transported goods are excluded from warranty! Paintwork Chassis shot-blasted, primed, and final coat single colour 2K/HS acrylic paint in DB Novagrau; body RAL 9010 pure white with 'Revolution' lettering Miscellaneous Foldable underrun bar; wheel chocks with holder; 1/2 shell plastic mudguards; with Dekra inspection and certificate (per §13 EC FGV); contour marking with reflective tape per ECE R 048, side in white, rear in red; shovel and broom holder mounted on front wall

Condition: new, machine/vehicle number: 11be0b1246b37a0869e99ab60, empty load weight: 5,100 kg, maximum load weight: 33,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space height: 1,750 mm, loading space volume: 40 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,340 mm, suspension: air, tire size: 385/65 R 22,5, Further Information Chassis Semi-Trailer Tipper Fine-grain steel welded construction in basic lightweight design, fifth wheel plate with interchangeable 2" kingpin Curved front end, patented 24 t two-speed landing gear, single-sided operation, with straight lower section, without compensating ram 2 wheel chocks with holders Foldable underrun protection Half-shell mudguards Integrated mudguard holders with stone-repellent surface Splash guards with anti-spray only on the last axle 1 tarpaulin bar with bracket 2 tow hooks at the rear Axles & Suspension SAF disc braked axles with 430 mm disc diameter Axles/chassis laser-measured to reduce tire wear and fuel consumption Offroad version axles Air suspension 1st axle: automatic lift axle, including forced lowering and traction aid, activation via 3x braking (traction aid functional up to an axle load exceedance of 30% and a max speed of 25 km/h) Hot-dip galvanized lift axle mechanism with 10 years warranty against corrosion Braking System 2-line compressed air braking system, color-coded lines for easy servicing. Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS (Electronic Braking System) with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Wheels and Tires 385/65 R22.5 tires, manufacturer at the supplier’s choice Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via in-cab display via EBS, truck not installed (requirement must be met by the truck. Only for base tires). Electrical System 24 Volt, multi-chamber lights, yellow LED side lighting Yellow LED side indicators linked with turn signals "flashing side lights" 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin fail-safe sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard chrome plated, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulic via truck PTO Body Aluminum box body made from high-quality, wear-resistant material; 5 mm thick bulkhead with external end walls made from 30 mm hollow profiles, neatly welded with aggregate-repelling upper rail profile. Interior with ladder at bulkhead (not available with Cramaro). Shovel and broom holders outside at the bulkhead. Greenline - conical and aerodynamic body shape Membrane rear wall Swing tailgate with double hinge, external, with 2-point hook locking. Tailgate with rubber seal. Note! Heat resistant up to max. 170°C! Continuous 6 mm thick floor Step platform with ladder, connecting plate for air/electric/breaking with ample space for optimal operability. Roll tarp stored on right-hand side for FR, with central locking on left-hand side for FR Country of Registration / License Plates Crodpfx Aoi Rixyjaxjb Germany Certificate of approval according to EC 2007/46 24/7 service hotline Prepared for single-line number plate holder Conspicuity marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame: DB 7350 Nova grey "10 year anti-corrosion warranty" Landing gear: Black coated Body: Natural aluminium Roll tarp: RAL 7035 light grey

Condition: new, machine/vehicle number: efdaf8862775f9506d97b86a5, empty load weight: 5,600 kg, maximum load weight: 33,400 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R 22,5, Further information Chassis Semi-Tipper Fine-grained steel welded construction, in basic lightweight design, fifth wheel plate with interchangeable 2" kingpin Curved front panel, patented 24 t, 2-speed landing gear, single-sided operation, with straight base, without displacement compensation 2 wheel chocks with holders Underrun protection, foldable Half-shell mudguards Integrated mudguard holder, surface stone-repellent With anti-spray mud flaps only on the last axle 1 tarp rod with holder 2 towing hooks at rear Axles & Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser alignment reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start-up aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air brake system, color-coded piping for easy maintenance. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise & lower valve Vehicle stability control system Wheels and tires 385/65 R22.5, brand at manufacturer's discretion Steel rims, factory silver "TPMS" Tire pressure monitoring system according to ECE R 141, display via the towing vehicle, through EBS, no truck installation (requirement must be present in the truck, only on primary tires) Electrics 24 Volt, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to the indicator, "flashing side marker lights" 2 white position lights at front 2 white/red lane guidance lights at rear 2 x 7-pin non-interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck PTO Body Aluminum box body made of high-quality, wear-resistant material, headboard 5 mm thick, with external side walls made of 30 mm hollow-chamber profiles, cleanly welded, with bulk material-repellent upper beam profile. Internal step at headboard (not in combination with Cramaro). Shovel and broom holder on the outside of the headboard. Greenline – conical and aerodynamic body design Membrane – tailgate Tailgate pendulum mounted with double hinge and two-wing door split 1/2 to 1/2, top with swing bracket, with one grain chute per door. Tailgate with rubber seal Note! Heat resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with access, connection plate for air/electric and brake, with generous clearance for best possible operability. Roll tarp stows to right side (when viewed from rear), with central locking to the left (from rear) Country of registration/Plates Germany Type approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, side white and rear red Paintwork Codpji Ri Ihofx Aaxorb Frame: DB 7350 Novagrau "10-year warranty against rust-through" Body: natural aluminum Roll tarp: RAL 7035 light grey

Condition: new, machine/vehicle number: 42a74cba14ef2bfc0e90e52b2, empty load weight: 6,500 kg, maximum load weight: 32,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,320 mm, loading space height: 2,150 mm, loading space volume: 50 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,740 mm, suspension: air, tire size: 385/65 R 22.5, Further information Chassis Semi-trailer Tipper Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 cones with hydraulic mount for Horsch Trailer Lift. Curved front panel, hydraulic landing legs, wheel chocks with holder, special side underrun protection, foldable rear underrun protection, quarter shell mudguards before and after the axle assembly, anti-spray mudflaps only on the last axle, tarpaulin rod with mounting bracket, tow hook at the rear. Axles + Suspension SAF/BPW disc brake axles with 430 mm disc diameter, axles/chassis laser aligned to reduce tire wear and fuel consumption, air suspension with safety ropes, 1st axle with automatic lift axle function, including forced lowering and starting aid. Brake system 2-line pneumatic brake system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front, without connecting line, EBS (Electronic Braking System) with EBS socket at the front, no connection cable included. Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With raise & lower valve Vehicle - Driving stability system Wheels and Tires 385/65 R22.5, steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle, connected via EBS, not installed in truck (truck must be pre-equipped. Only for standard tires). Electrics 24 Volt, multi-chamber lights, side yellow LED lighting, side yellow LED indicator-linked lighting "flashing side marker lights", 2 white position lights front, 2 white/red lane marker lights at rear, 2 x 7-pin non-interchangeable sockets at front, no connection cable. Hydraulics Low-pressure cylinder max. 170 bar, with HDK screw coupling, fixed part, NW 48 mm (without hose connection), operation hydraulically via the truck PTO, hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut. Automatic hydraulic shut-off for the drop-down side wall (left side) and the trailer lift arms at approx. 20 km/h. The trailer lift arms can be separately locked allowing the trailer to be unhitched on its own. Tipping body Aluminium box body made of high-grade, wear-resistant material, bulkhead 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, precisely welded, with bulk material-repelling top rail profile. Left side wall hydraulically lowerable over approx. 7800 mm, by approx. 600 mm. Note! Before lowering, the sliding roof must be opened and roof bows put into parked position. Note! Only in combination with electro-hydraulic package! External shovel and broom holder on the front bulkhead. Inside access ladder at the front bulkhead. Greenline – conical and aerodynamic body shape. Rear wall pendulum mounted, with 2 grain chutes. Rear wall additionally hydraulically liftable by approx. 1000 mm. Note! Only in combination with the electro-hydraulic package! Rear wall with rubber seal. Note: heat-resistant up to max. 170°C! Cedei Rix Depfx Aaxerb Floor continuous 6 mm thick. Standing platform with steps Sliding roof on the right for stowage, with central locking on the left. Country of approval Germany With Dekra inspection and expertise (according to §13 EC - FGV) Paintwork Frame: DB 7350 Nova grey "10 years anti-perforation warranty" Body: natural aluminium Sliding roof: RAL 7035 light grey

Condition: new, machine/vehicle number: 71cc13750cef13b72f7a55abe, empty load weight: 5,500 kg, maximum load weight: 29,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22,5², Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Underride guard, folding Half-shell mudguards Integrated mudguard holder Stone-repellent surface With anti-spray flaps on last axle only 1 tarpaulin pole with bracket 2 towing hooks at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm (without hose connection). Hydraulic actuation via truck power take-off Troughs Aluminum box body made of high-quality, abrasion-resistant 5 mm thick front wall, with external walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Inside with access to front wall (not in conjunction with Cramaro). Shovel and brush holder on the outside of the front wall. Greenline - conical and aerodynamic trough shape Membrane rear wall Rear wall pendulum-mounted with double-joint hinge and with 2-leaf door partition 1/2 to 1/2, with pivoting gallows at the top, with one grain slider per door. Cjdpfx Aasi Ri Efsxsrb Rear panel with rubber sealNote! Heat-resistant up to max. 170°C! Floor 6 mm thick throughout Standing platform with access, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red on the rear Paint finish Frame DB 7350 Novagr

Condition: new, machine/vehicle number: 92df8e9d6c187f34b20298f39, empty load weight: 4,900 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22,5², Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Telescopic support in the middle, unhitching with load not possible, when unhitched the vehicle must be at an angle to the rear. 2 wheel chocks with holder Folding underride guard Half-shell mudguards Integrated mudguard holder Stone-repellent surface with anti-spray flaps on last axle only 1 tarpaulin pole with bracket 2 towing hooks at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm (without hose connection). Hydraulic actuation via truck power take-off Troughs Aluminum box body made of high-quality, abrasion-resistant 5 mm thick front wall, with external walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Inside with access to front wall (not in conjunction with Cramaro). Shovel and brush holder on the outside of the front wall. Greenline - conical and aerodynamic trough shape Membrane rear wall Rear wall as swing flap with double-jointed hinge, resting on the outside with double hook lock. Rear panel with rubber sealNote! Heat-resistant up to max. 170°C! Floor 6 mm thick throughout Standing platform with access, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany Test approval according to EC 2007/46 Cjdpfx Aoi Riz Roaxerb 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red on the rear Paint finish Frame DB 7350 nova gray 10 years

Condition: new, machine/vehicle number: 6e7907b4000c16661fa1c8a1f, empty load weight: 4,150 kg, maximum load weight: 30,850 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Without support leg Wheel chocks with holder Underride guard, foldable Half-shell mudguards Integrated mudguard holder Stone-repellent surface Tow hook at the rear Axles+suspension SAF disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Polished aluminum rims, manufacturer's choice Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin socket at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm (without hose connection). Hydraulic actuation via truck power take-off Troughs Aluminum box body made of high-quality, abrasion-resistant 5 mm thick front wall, with external walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Inside with access to front wall (not in conjunction with Cramaro). Shovel and brush holder on the outside of the front wall. Greenline - conical and aerodynamic trough shape Membrane rear wall Rear wall as swing flap with double-jointed hinge, resting on the outside with double hook lock. Rear panel with rubber sealNote! Heat-resistant up to max. 170°C! Floor 5 mm thick throughout, Brinell 110Note! Only for transporting sand, grit and rolled gravel with a maximum grain size of up to 20 mm! All other transport goods are excluded from the warranty! Standing platform with step, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions Csdei Ri Aropfx Aaxorb For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and castering behavior possible due to incorrect load distribution) Revolution Link: Revolution Link experience report: Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Body R

Condition: new, machine/vehicle number: abc6276e1749f9dddc494eb32, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22,5², Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Telescopic support in the middle, unhitching with load not possible, when unhitched the vehicle must be at an angle to the rear. 2 wheel chocks with holder Folding underride guard Half-shell mudguards Integrated mudguard holder Stone-repellent surface with anti-spray flaps on last axle only 1 tarpaulin pole with bracket 2 towing hooks at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Automatic tilt lowering with shut-off valve Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Cedpfoi Ri H Isx Aaxerb Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm (without hose connection). Hydraulic actuation via truck power take-off Troughs Aluminum box body made of high-quality, abrasion-resistant 5 mm thick front wall, with external walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Inside with access to front wall (not in conjunction with Cramaro). Shovel and brush holder on the outside of the front wall. Greenline - conical and aerodynamic trough shape Membrane rear wall Rear wall as swing flap with double-jointed hinge, resting on the outside with double hook lock. Rear panel with rubber sealNote! Heat-resistant up to max. 170°C! Floor 6 mm thick throughout Standing platform with access, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red on the rear

Condition: new, machine/vehicle number: 074630ca1b8dc2d710f82c15a, empty load weight: 3,980 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Without support leg Wheel chocks with holder Underride guard, foldable Half-shell mudguards Integrated mudguard holder Stone-repellent surface Tow hook at the rear Axles+suspension SAF disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires Credpfx Aei Ri H Soaxob 385/65 R22.5 tires of the manufacturer's choice Polished aluminum rims, manufacturer's choice Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin socket at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm (without hose connection). Hydraulic actuation via truck power take-off Troughs Aluminum box body made of high-quality, abrasion-resistant 5 mm thick front wall, with external walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Inside with access to front wall (not in conjunction with Cramaro). Shovel and brush holder on the outside of the front wall. Greenline - conical and aerodynamic trough shape Membrane rear wall Rear wall as swing flap with double-jointed hinge, resting on the outside with double hook lock. Rear panel with rubber sealNote! Heat-resistant up to max. 170°C! Floor 5 mm thick throughout, Brinell 110Note! Only for transporting sand, grit and rolled gravel with a maximum grain size of up to 20 mm! All other transport goods are excluded from the warranty! Standing platform with step, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and castering behavior possible due to incorrect load distribution) Revolution Link: Revolution Link experience report: Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paint finish Frame DB 7350 nova gray Body R

Condition: new, machine/vehicle number: 45d76d32267904923b7adcdea, empty load weight: 4,980 kg, maximum load weight: 30,020 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Wheel chocks with holder Underride guard, folding Half-shell mudguards Integrated mudguard holder Surface stone-repellent Tow hook at the rear Axles+suspension SAF disc brake axles Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Wheels and tires 385/65 R22.5 tires of the manufacturer's choice Polished aluminum rims, manufacturer's choice Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin socket at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm (without hose connection). Hydraulic actuation via truck power take-off Troughs Aluminum box body made of high-quality, abrasion-resistant 5 mm thick front wall, with external walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Inside with access to front wall (not in conjunction with Cramaro). Shovel and brush holder on the outside of the front wall. Greenline - conical and aerodynamic trough shape Membrane rear wall Rear wall as swing flap with double-jointed hinge, resting on the outside with double hook lock. Rear panel with rubber sealNote! Heat-resistant up to max. 170°C! Floor 5 mm thick throughout, Brinell 110Note! Only for transporting sand, grit and rolled gravel with a maximum grain size of up to 20 mm! All other transport goods are excluded from the warranty! Standing platform with step, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. Crsdpfxoi Ri Idj Aaxjb The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and castering behavior possible due to incorrect load distribution) Revolution Link: Revolution Link experience report: Country of registration / plates Germany with Dekra approval and expert opinion (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 0

Condition: new, machine/vehicle number: 357314e4e176f8758d11ba42b, empty load weight: 4,500 kg, maximum load weight: 30,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis tipper semi-trailer Fine-grained steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end Patented Telescopic support in the middle, unhitching with load not possible, when unhitched the vehicle must be at an angle to the rear. 2 wheel chocks with holder Folding underride guard Half-shell mudguards Integrated mudguard holder Stone-repellent surface with anti-spray flaps on last axle only 1 tarpaulin pole with bracket 2 towing hooks at the rear Axles+suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axles in off-road version, Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism 10-year warranty against rusting through Brake system 2-line compressed air brake systemColor-coded cable routing for easy servicing. Spring-loaded parking brake 2 interchangeable front clutch heads, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Vehicle stability system Automatic tilt lowering with shut-off valve Wheels and tires Cjdsi Ri R Iepfx Aaxsrb 385/65 R22.5 tires of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 2 x 7-pin interchangeable sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chlorinated, with HDK screw socket, fixed part, NW 48 mm (without hose connection). Hydraulic actuation via truck power take-off Troughs Aluminum box body made of high-quality, abrasion-resistant 5 mm thick front wall, with external walls made of 30 mm hollow chamber profiles, cleanly welded, with bulk material-repellent top rail profile. Inside with access to front wall (not in conjunction with Cramaro). Shovel and brush holder on the outside of the front wall. Greenline - conical and aerodynamic trough shape Membrane rear wall Rear wall as swing flap with double-jointed hinge, resting on the outside with double hook lock. Rear panel with rubber sealNote! Heat-resistant up to max. 170°C! Floor 6 mm thick throughout Standing platform with access, connection plate for air/electric and brake with large clearance for best possible operability. Roller tarpaulin on one side for depositing in FR-right, with central locking in FR-left Operating instructions For salt, lime, etc. We recommend a tipping cylinder with a hard chrome-plated piston rod so that it is not attacked by the material and rusts. The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Germany Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red on the rear

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902032084, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 08/2024, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: white, Year of construction: 2024, construction height: 3,240 mm, Please note that these images are archive images; the vehicle may still be in use! Alcoa Dura Bright aluminum rims Air suspension 1st axle: automatic lift axle, including forced lowering and traction control, actuated with "3x brakes" (traction control is functional up to an axle load exceeding 30% and up to a maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" 10-year warranty against perforation corrosion Electrics 24-volt, multi-chamber lights, yellow LED side lighting 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 15-pin socket at the front, without connecting cable 2 additional LED work lights, integrated into the rear, controlled via the reversing light Hydraulics High-pressure cylinder max. 250 bar, lowest setting, hard-chromed, with HDK screw sleeve, fixed part, NW 48 mm. (without hose connection) will be removed from the vehicle being claimed. Hydraulic operation via truck auxiliary drive. Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut. Csdpfxowhfiyo Aaxorb Troughs Aluminum box body made of high-quality, abrasion-resistant material. 5 mm thick sloping bulkhead with external cylinder mount. Side walls made of 30 mm hollow-chamber profiles, neatly welded, with bulk material-repellent upper beam profile. Inside with access ramp on the bulkhead (not in combination with Cramaro). Shovel and brush holder on the outside on the bulkhead. Greenline - conical and aerodynamic body shape. "Membrane" rear wall. Rear wall as a swing flap with "double-joint hinge", externally mounted with double hook lock. Rear wall with rubber seal. Note: Heat-resistant up to max. 170°C! Floor 6 mm thick throughout Standing platform with access, connecting plate for air/electrical connections, and brakes with generous clearance for optimal operation. Roll-up tarpaulin on one side for storage in the right-hand drive position, with central locking in the left-hand drive position

Condition: used, maximum load weight: 33,520 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2011, Equipment: ABS, Vehicle Identification No.: WFDFLT33502005191 REAR TIPPER - Steel frame - Aluminum body Crsdpfx Aaowpbg Dexob DE HU 04.2026 - SP 10.2025 Own weight: 5,480 kg Body dimensions: 8,350 / 7,500 x 2,460 x 2,200 mm - Volume: approx. 43 m³ BPW Eco Plus axles with drum brakes 1 x aluminum support leg Combination - portal doors - swing flap with 2 sliders Roll-up tarpaulin Platform Adjustable underrun protection Tires: 385/65 R 22.5 Aluminum wheels Subject to change, prior sale, and errors. This description serves as a general identification of the vehicle and does not constitute a warranty under sales law. The description in the purchase contract is decisive. Our offer generally does not include a new TÜV inspection. If you require a new TÜV inspection, we would be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: good (used), axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2023, Equipment: ABS, = Additional Options and Equipment = - EBS - Lifting roof = Notes = Number of axles: 3, unladen weight: 6,080 kg, gross weight: 39,000 kg, chassis type: complete chassis, chassis material: steel, kingpin size: 2 inch, suspension type: air suspension, ABS, EBS, body year: 2023, customs rope, lifting roof, sliding roof, axle type: SAF = Further Information = General Information Cab type: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Gearbox: Manual Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; left tire tread: 3 mm; right tire tread: 2 mm Axle 2: left tire tread: 11 mm; right tire tread: 10 mm Axle 3: left tire tread: 11 mm; right tire tread: 10 mm Weights Unladen weight: 6,080 kg Payload: 32,920 kg Gross vehicle weight: 39,000 kg Functionality Sliding roof: Yes Environment Emission class: Euro 0 Condition Technical condition: good Visual condition: good Damage: none = Company Information = Cjdpoy Iv Imofx Aaxorb Kleyn Trucks is one of the world’s largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands, model years, and price classes. Why buy at Kleyn Trucks? It’s simple! • Large and fast-changing stock • Recognizable quality • Good pricing • Reliable business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration plates arranged quickly • Skilled technical services • The security of recognizable quality • And more… Visit our website for special offers and our complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, empty load weight: 7,375 kg, maximum load weight: 27,625 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2012, loading space length: 13,650 mm, suspension: air, tire size: 385/65R22,5 160J, color: other, gearing type: other, front tire size: 385/65R22,5 160J, rear tire size: 385/65R22,5 160J, driver cabin: other, emission class: none, Equipment: ABS, Stake pockets, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Cedpjy Nivtefx Aaxorb

Condition: used, empty load weight: 5,300 kg, maximum load weight: 12,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,900 mm, loading space volume: 52 m³, suspension: air, tire size: 235/75R17,5 ---/141J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/141J, rear tire size: 235/75R17,5 ---/141J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Crodpsy Niuiofx Aaxob

Condition: used, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2019, loading space length: 7,200 mm, suspension: air, tire size: 445/45 R19,5 160J, color: other, gearing type: other, front tire size: 445/45 R19,5 160J, rear tire size: 445/45 R19,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Crsdpey Nitrjfx Aaxsb

Condition: used, machine/vehicle number: WFDFLT3240100xxxx, Year of construction: 2019, Please provide reference number upon request: 23046 Specifications: 2019 model Length: 998 cm Wheelbase: 136/136 cm Net weight: 4800 kg Max payload: 19,200 kg Owner has paid for the trailer Ready for delivery   Description: 2019 Fliegl 3 axle container trailer. The owner says he has gone over everything to make sure it is in good condition. Ready for delivery. Technical approved: Yes EU-approved until: 05.02.2027 Own weight: 4800 Crjdpey Elmtsfx Aaxob Total Weight: 19200 Model: 3 akslet container kjerre = More information = Please contact ATS Norway for more information

Condition: used, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,610 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Crodpfxjy Izthj Aaxob

Condition: good (used), axle configuration: 3 axles, first registration: 03/2021, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,010 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS - Lifting roof Crodpoy Hcnqofx Aaxjb = Notes = Number of axles: 3, Unladen weight: 6,015 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Year of body construction: 2021, Lifting roof, Sliding roof, Axle type: SAF = Further Information = General Information Cabin: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Left tire tread: 5 mm; Right tire tread: 5 mm Axle 2: Twin tires; Left outer tire tread: 9 mm; Right inner tire tread: 9 mm Axle 3: Left tire tread: 6 mm; Right tire tread: 4 mm Weights Curb weight: 6,015 kg Payload: 32,985 kg GVW: 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Condition Technical condition: good Visual condition: good Damages: none = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here, you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our inventory includes all European brands, years, and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognized quality • Competitive pricing • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) plates can be arranged quickly • Professional technical services • The safety of 'recognized quality' • And more.... Please visit our website for special offers and the complete inventory. Leasing via Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry through our website. Ask directly about our European warranty package.

Condition: good (used), axle configuration: 3 axles, first registration: 03/2022, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2022, Equipment: ABS, = Additional Options and Accessories = - EBS - Lifting roof = Remarks = Number of axles: 3, Curb weight: 6,080 kg, Gross weight: 39,000 kg, Chassis type: Full chassis, Chassis material: Steel, Kingpin size: 2 inches, Suspension type: Air suspension, ABS, EBS, Superstructure year: 2022, Lifting roof, Sliding roof, Axle type: SAF = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Driveline Fuel type: Diesel Transmission Transmission: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Drum brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread left: 10 mm; Tire tread right: 11 mm Axle 2: Tire tread left: 10 mm; Tire tread right: 10 mm Axle 3: Tire tread left: 10 mm; Tire tread right: 10 mm Weights Unladen weight: 6,080 kg Payload: 32,920 kg Gross vehicle weight: 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Condition Technical condition: Good Optical condition: Good Damage: None = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly updated stock of 1,200 used trucks, tractor units, and trailers. Our offer includes all European brands across all model years and price classes. Why buy from Kleyn Trucks? Simple! Credpfey Hcnkex Aaxsb • Large, fast-changing inventory • Recognizable quality • Competitive prices • Reliable business conduct • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more.... Please visit our website for special offers and the complete inventory: Leasing through Kleyn Trucks is available in most European countries! Quickly calculate your leasing rate and submit a request via our website. Ask directly about our European warranty package.