Used Faymonville Max Semitrailers for sale (185)

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-Axle MULTIMAX "PLUS" semi-trailer, air-suspended and with hydraulically forced steering axles. Technical data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h (legal) Total weight: 49500 kg / 31500 kg Fifth wheel load: 18000 kg Axle load: 31500 kg / 31500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm Kingpin offset to rear approx.: 2,100 mm Fifth wheel height loaded approx.: 1205 mm Platform length approx.: 9,600 mm Extendable by approx.: ? Platform width approx.: 2,540 mm Loading height at max. load approx.: 890 mm Suspension travel approx.: -55 / +145 mm Axle spacing: 1,360 mm Total weight dependent on fifth wheel load: Yes Special permit required if exceeding country-specific regulations. Technical description Gooseneck: Gooseneck in SNT design to optimize platform length, length approx. 3,900 mm, rear with a bevel of approx. 1,000 mm x 6°. Technical fifth wheel load: 18,000 kg. For tractor-trailer combinations: 4 x 2 and 6 x 2. Platform: Platform, length approx. 9,600 mm with a bevel at the rear of approx. 900 mm x 6°. Platform behind the gooseneck can be hydraulically raised and lowered, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-piece AXS steel ramps with a length of approx. 4,920 mm and a width of approx. 900 mm. Open grating deck. Hydraulically folding ramp ends. Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 365 mm. Maximum load and angle of inclination according to technical data sheet: C470319 Gkodpfxeizu Nte Anqob Maximum inclination angle with lowered platform: 9° Axles and suspension: BPW axles and suspension, all axles hydro-mechanically forced steered. Technical axle load: 12,000 kg Air suspension with lifting and lowering valve. Axle tool. Tires: 235/75 R 17.5 3PMSF, twin tires. Manufacturer according to our choice Load index 143/141J (144/144F) Braking system: Braking system of the brand WABCO EBS-E according to EU regulations. Without connection cable to the tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" design according to EU regulations. (ASS 3) Metallization: Complete HRM metallization (High Resistance Metallization) Complete steel structure shot-blasted, then hot-dip galvanized with ZINACOR 850 (Zinc 85% - Aluminum 15%). Painting: 6-coat finish: Complete steel structure shot-blasted after welding. 1 coat of zinc-based primer, 1 coat of adhesion primer. Top coat with 2 coats of 2-component paint (acrylic), solid color in RAL colors of your choice, followed by sealing of the cavities with special wax. Rims in silver. Multi-color and special paint finishes available at an extra cost. Steel structure: Steel structure made of high-strength fine-grain steels. Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders tested according to DIN-EN 287-1. Welding process MAG according to EN ISO 4063. Protective gas M21 according to EN ISO 14175 Front wall made of steel, plug-in, approx. 400 mm high Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile. ASPÖCK-UNIBOX on the connection strip at the front with sockets 24N, 24S & 15-pole. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pole connection according to ISO-12098 If your pin assignment differs from the ISO connection standard, please inform us. "Anderson" socket on the connection strip at

Condition: used, axle configuration: 3 axles, first registration: 04/2019, loading space length: 9,200 mm, loading space width: 2,540 mm, suspension: air, tire size: 245/70R17.5, color: grey, Year of construction: 2019, Faymonville F-S43-1AAF 660 cm Extendable Hydraulic ramps Winch Forced steering = Further information = Tire size: 245/70R17.5 Suspension: Air suspension Front axle: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Center axle: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Rear axle: Dual tires; Steered; Tire tread depth left inner: 50%; Tire tread depth left outer: 50%; Tire tread depth right inner: 50%; Tire tread depth right outer: 50% Unladen weight: 13,500 kg Payload: 47,500 kg Gedpozinblofx Anqjkb GVWR: 61,000 kg Model number: F-S43-1AAF / EXTENDABLE / HYDRAU = Company information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB) (Wouter Greutink NL-DE-GB-ES-IT) (Govorim po ryccki) We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, machine/vehicle number: YAFTL407100007347, loading space length: 13,300 mm, loading space width: 2,530 mm, Year of construction: 2007, = Additional Options and Accessories = - Air suspension, rear - Air suspension, front - Drum brake system = Additional Information = Weights Unladen weight: 11,900 kg Godpfjzyvzzox Anqekb Payload: 36,100 kg GVW: 48,000 kg Condition Overall condition: average Technical condition: average Optical condition: average Additional Information Condition of front tires: 30% Front tires: 235/75 R 17.5 Rear tires: 235/75 R 17.5 Last inspection: 2026-08-12 Additional Information Please contact Lastas Sales for further information.

Condition: used, Year of construction: 2007, 2007 | Faymonville STBZ3 | Used Low Bed Semi-trailer Gedpfx Ansznmcloqekb 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 33000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 12 inspection points 12 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Tiltable bed trailer, with some body work to do. Has its own hyd-agregat. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40866 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 Gkjdpfx Ajl Sl Izsnqeb 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor

Condition: new, empty load weight: 13,250 kg, maximum load weight: 47,550 kg, overall weight: 60,800 kg, axle configuration: > 3 axles, suspension: air, tire size: 245/70 r17.5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform in extendable version: Loading area in extendable version with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings can be folded outwards 3 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 40,000 kg Gkodpfsl Uxdkex Anqob Seat posts: JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 245/70 R 17.5 Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Coating: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel end wall approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 4 restraining shoes with holder on the bulkhead One spare wheel with holder in front of the bulkhead Electro-hydraulic unit Re-steering from the front and rear by means of cable remote control operated via pushbuttons with tracking control of the axles Mounting in the rear area of the gooseneck for ALU docking lights European reflector plates (red/yellow) at the rear of the trailer White reflective tape in accordance with EU regulations on the side, on the extension and at the rear Red On the gooseneck and on the ramps on the left and right, a holder for the warning signs including a socket A bracket for a rotating beacon at the rear of the trailer Galvanized folding supports under the sloping loading area Operating valves for the ramps fitted on the right-hand side of the trailer Cover plates to bridge the gap between the ramps and the cargo bed A mud flap at the rear of the trailer Manual and description on USB stick BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm The rear galvanized stanchions are removable Length of the body approx. 2,560 mm One tool box INOX 1,350 x 400 x 400 on the gooseneck Box covered oil filler plug 4 pairs of WADER container pockets in t

Condition: new, empty load weight: 6,350 kg, maximum load weight: 38,650 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Loading platform: - 2 pairs of lashing rings that can be folded outwards (LC 5,000 daN) - 24 pairs of cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Fifth wheel: - JOST fifth wheel (mechanical) with a 2-speed gearbox for a 24-tonne lifting capacity (50-tonne test load) Axles and tires: - BPW axles, air-sprung, with disc brakes (430 mm), with raising/lowering function - Tires: 385/65 R 22.5 Braking system: - WABCO braking system in accordance with EU regulations, with EBS-E (2S2M) Paintwork: - First-class and durable corrosion protection of the standard bead-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) topcoat, single color in MB 7350 Novagrau - Rear part metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible Steel structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations - Lighting: 24 volts - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets - Connection according to ISO. - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Included accessories: - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with bracket - 2" king pin - Galvanized steel front panel, approximately 1,600 mm high. EN12642-XL - White reflector tape in accordance with EU regulations on the sides of the trailer and red on the rear - European reflector signs (red-yellow) at the rear of the trailer - Loading platform with approximately 30 mm thick hardwood floor, edged with omega profiles - 10 pairs of socket pockets for 100 x 50 mm securing bars in the outer frame of the loading platform - 3 pairs of socket pocket strips, mounted transversely in the loading platform, for 100 x 50 mm securing bars - Storage for 1,000 mm securing bars, at the rear in the central beam - 1 spare wheel holder under the loading platform on the right side in the direction of travel - One mud flap at the rear of the trailer - Manual and description on a USB stick - One bracket for a rotating beacon at the rear of the trailer - One bracket for warning signs including socket on the gooseneck and on the rear panel, left and right - 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container. Flush with the rear - Speed stickers 80 km/h on the rear and on both sides Gjdpfx Ansiu Etksqjkb - Four warning signs, each extendable by approximately 400 mm, approximately 423 x 423 mm, with an LED position light - Load gauge for determining axle loads, including a load diagram - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure bead-blasted, followed by the defined visible surfaces hot-coated with metallization using ZINACOR 850 (Zinc 85% - Aluminum 15%)

Condition: used, color: black, Year of construction: 2019, Faymonville F-S43-1AAF. Year: 2019. 9-ton SAF axles. Gsdpfszyrfvjx Anqskb Max. weight: 45,000 kg. Kingpin load: 18,000 kg. 7.4-meter extendable. Power steering on 3 steering axles. Air suspension. Hydraulic system powered by NATO electricity. ABS EBS ALB. Floor dimensions: L: 13,550 mm. W: 2500 mm. H: 1450 mm. H: Aluminum sideboards: 600 mm. Kingpin height: 1250 mm. Tires: 385/65R22.5, 70% tread. ID No.: 489. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of construction: 2019 GVW: 44,999 kg Price: On request = Company information = For more information:

Condition: used, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2018, loading space length: 13,500 mm, loading space width: 2,540 mm, total length: 13,750 mm, total width: 2,540 mm, Equipment: ABS, Vehicle identification number: YAFSR3003J0021354 TELESCOPIC, extendable to 8,200 mm CONTAINER POCKETS WADER for 1 x 20", 2 x 20", 1 x 40", including 45" container DE HU (German technical inspection) valid until 05.2027 - SP (German roadworthiness test) valid until 11.2026 SAF axles with drum brakes 3 x forced-steering axles, hydro-mechanically on a turntable with cable control and radio remote control Gkodpfx Anezp S Ezjqjb Automatic lane keeping Platform dimensions: 13,500 mm - loading height: 1,100 mm Saddle height 950 - 1,050 mm Turning radius to the rear: 2,100 mm Stanchion pockets in the floor, including stanchions (completeness not guaranteed) NATO socket Electro-hydraulic unit Extension lighting Toolbox Central lubrication system Tires: 235/75 R 17.5 Spare wheel holder WITH spare wheel Changes, prior sale and errors are expressly reserved. The description serves for the general identification of the vehicle and does not constitute a guarantee in the legal sense. The description in the purchase contract shall be decisive. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with an offer from our partner workshops! The vehicle may be covered with or labeled with advertising. Our general terms and conditions of delivery and payment apply.

Condition: used, machine/vehicle number: YAMT14XX5K0104637, axle configuration: > 3 axles, first registration: 01/2020, total length: 14,100 mm, total width: 2,550 mm, total height: 3,350 mm, suspension: air, tire size: 235/75 R17.5, color: other, Year of construction: 2020, Chassis Chassis height: 90 cm Diameter coupling pin / coupling plate: 2 inch Structure Dish height: 120 cm Special Transport 2-piece driving plates: ✓ Hydraulic ramps: ✓ Length above axes: 90 cm Length of loading floor: 930 cm Length of ramps: 405 cm Length of swan neck: 430 cm Max width: 305 cm (20 cm + 20 cm) Max. length: 930 cm Expandable: ✓ Tank Fuel: ✓ 3-axle semi lowbed trailer with hydraulic ramps, ABS, Air suspension, 1st axle lifting axle, 3rd and 4th axles passive steering axles, Drum brakes, Saf axles, Tyres 235/75R17.5, Double tyres, Kingpin diameter 2 inch // DIMENSIONS // 60800 kg max weight, Load bed lenght 930 cm, Load bed width 255 cm, Max load bed width 305 cm, Load bed height 90 cm, Gooseneck lenght 430 cm, Gooseneck height 160 cm, Kingping height 120 cm, Ramp lenght 405 cm, Shipment dimensions: 1410x255x335 cm = More information = Axle configuration Tyre size: 235/75 R17.5 Make axles: Saf Brakes: drum brakes Suspension: air suspension Axle 1: Double wheels; Lift axle; Tyre profile left outer: 15%; Tyre profile right outer: 80% Axle 2: Double wheels; Tyre profile left outer: 60%; Tyre profile right outer: 50% Axle 3: Double wheels; Steering; Tyre profile left outer: 70%; Tyre profile right outer: 70% Axle 4: Double wheels; Steering; Tyre profile left outer: 75%; Tyre profile right outer: 65% Weights Empty weight: 11.480 kg Carrying capacity: 49.320 kg GVW: 60.800 kg Functional Make of bodywork: Faymonville Height of cargo floor: 90 cm Gkodpfxju H D Tas Anqjb Identification Registration number: C525073 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: new, maximum load weight: 49,000 kg, overall weight: 60,800 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with angled front corners at 45° and rear slope of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking, 30 mm thick Extendable platform: -Extendable platform with rear slope of approx. 1,000 mm x 8° -5 pairs of lashing rings, foldable outwards (LC 5,000 daN) -3 pairs of lashing rings, foldable outwards (LC 10,000 daN) -1 pair of lashing rings, lying horizontally at the front of the platform (LC 10,000 daN) -Cutouts in the outer frame of the platform for attaching tension straps (LC 2,000 daN) -Hardwood decking, approx. 48 mm thick, with non-slip steel plate over the axles Demountable two-piece ramps: -One pair of galvanized, two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm, with hardwood decking, approx. 48 mm thick -Ramp with hydraulically folding ramp sections, hydraulic lifting system and hydraulically adjustable -Maximum load per pair: 40,000 kg Kingpin supports: -JOST kingpin supports (mechanical) with 2-speed gearbox for 24-ton lifting capacity (50-ton test load) Axles and tires: -BPW axles, two fixed axles, two steered axles, air-suspended, with drum brakes, with lifting/lowering function -The steered axles can be activated via an electro-magnetic reverse lock, either in reverse gear or manually -Axle tool -Tires 235/75 R 17.5 Braking system: -Braking system according to EU regulations with EBS-E (4S3M) Steel structure: -Steel structure made of high-strength fine-grain steels -Steel grades: -S355J2+N/S355MC (yield strength 355 MPa) -S690QL/S700MC (yield strength 690 MPa) Painting: -First-class and durable corrosion protection of the standard bead-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer -High-quality 2-component (2K) topcoat, single color in Nova Gray Electrical system: -Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) -ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pole sockets Included accessories: -2" kingpin -One galvanized steel front panel, approx. 400 mm high -One spare wheel with holder in front of the front panel -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of chocks with holder on the front panel -Mounting in the rear area of the gooseneck for ALU ramp extensions -Galvanized folding supports under the slope of the platform -One bracket for a rotating beacon -Cover plates to bridge the gap between ramps and platform -White reflector tape according to EU regulations on the sides, on the extension and at the rear, red -Electro-hydraulic unit -One bracket for warning signs on the left and right sides of the gooseneck and ramps, including socket -Control valves for the ramps mounted on the right side of the trailer -One mud flap at the rear of the trailer -Manual and description on a USB stick -On the gooseneck, ALU side panels and rear panel can be plugged in, approx. 2,440 x 400 mm -The rear galvanized locking bars are removable (length of the superstructure approx. 2,560 mm) -4 pairs of WADER container pockets in the platform for a 20ft, 2x 20ft or a 40ft container Godpfx Ash Etf Rsnqskb -7 pairs of pocket for locking bars 100 x 50 mm in the outer frame of the platform -Extensions, galvanized, extendable by approx. 230 mm on each side -Lift axle on the front axle with control -Square ladder rails 20 x 20 mm -Central lubrication system BEKAMAX -Four warning signs, extendable by approx. 400 mm, approx. 423 x 423 mm

Condition: used, machine/vehicle number: YAFTL413000014309, axle configuration: > 3 axles, first registration: 01/2013, total length: 18,600 mm, total width: 2,750 mm, total height: 3,250 mm, suspension: hydraulics, tire size: 285/70 R19.5, color: other, Year of construction: 2013, = Additional options and accessories = - Drum brakes - Steering Axle = Remarks = Chassis Diameter coupling pin / coupling plate: 2 inch Drum brake: ✓ Structure Construction year: 2013 Special Transport Detachable swan neck: ✓ Length above axes: 540 cm Length of loading floor: 665 cm Lowloader: ✓ Max width: 3 cm (275 cm ) Expandable: ✓ NON-EU VEHICLE, REQUIRES CUSTOMS CLEARANCE // 4-axle lowloader with forced steering, Max weight 88.000 kg, Removable neck, Load bed lenght 665 cm, Load bed width 275 cm, Max load bed widht 3 cm (275 cm), Load bed height 65 cm, Axle plateau lenght 540 cm, Axle plateau height 105 cm, Saf axles, Hydraulic suspension, ABS, Forced steering, 4 steering axles, Drum brakes, Tires 285/70R19.5, Shipment dimensions 1860x275x3 cm = More information = Tyre size: 285/70 R19.5 Make axles: Saf Brakes: drum brakes Suspension: hydraulic suspension Front axle: Double wheels; Steering; Tyre profile left outer: 50%; Tyre profile right outer: 65% Middle axle 1: Double wheels; Steering; Tyre profile left inner: 15%; Tyre profile right outer: 15% Middle axle 2: Double wheels; Steering; Tyre profile left outer: 20%; Tyre profile right outer: % Rear axle: Double wheels; Steering; Tyre profile left inner: 45%; Tyre profile right outer: % Make of bodywork: Faymonville STBZ-4VA = Dealer information = Gsdextp Rvspfx Anqjkb For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, overall weight: 51,600 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 13,620 mm, loading space width: 2,540 mm, total width: 2,540 mm, total height: 2,700 mm, Equipment: ABS, Vehicle identification number: YAFSR3004K0022661 TELESCOPIC, extending to 8,200 mm Mounting rails for aluminum ramps, RAMP NOT INCLUDED Preparations for container locking, 1 x 20", 2 x 20", 1 x 40", accommodating 45" containers DE TÜV valid until 01/2027 - next inspection due SAF axles with drum brakes 3 forced-steering axles, hydro-mechanically mounted on a turntable with cable control and wireless remote control Automatic tracking LIFT AXLE Platform dimensions: 13,600 mm - loading height: 1,100 mm Fifth wheel height: 980 mm Rear turning radius: 2,100 mm Gkjdpfx Anszlvtnjqsb Recess pockets in the floor, including outriggers (completeness not guaranteed) NATO socket Electro-hydraulic unit Extension lighting Toolbox Central lubrication system Tires: 235/75 R 17.5 Spare wheel holder WITH spare wheel Changes, prior sale, and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a guarantee in the legal sense. The description in the purchase contract is decisive. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising or have lettering. Our general terms and conditions of delivery and payment apply.

Condition: good (used), first registration: 03/2016, total length: 15,450 mm, total width: 2,740 mm, total height: 950 mm, wheelbase: 12,660 mm, color: grey, Year of construction: 2016, Unladen weight: 18,900 kg Payload: 78,100 kg Gjdszxglhopfx Anqekb Gross vehicle weight (GVW): 97,000 kg Height of the loading platform: 95 cm Extendable superstructure: Yes Technical condition: good Optical condition: good FYMONVILLE MULTI-Z6L 6X SAF AXLES 5X HYDRAULIC STEERING AXLES REMOTE CONTROL AIR SUSPENSION ELECTRO-HYDRAULIC PACKAGE TIRE SIZE 245/70 R17.5 EXTENDABLE LOADING PLATFORM SIZE 1100 CM + 370 CM EXTENDABLE, TOTAL LENGTH OF THE LOADING PLATFORM 1470 CM WIDTH OF THE LOADING PLATFORM 274 CM + 2 X 25 CM SIDE EXTENSION, TOTAL WIDTH OF THE LOADING PLATFORM 320 CM LOADING EDGE HEIGHT 95 CM 2X HYDRAULIC RAMPS HOOK EYES AND KING PIN LED LIGHTS LARGE TOOLBOX CENTRAL LUBRICATION SYSTEM FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN WE SPEAK SPANISH WE SPEAK ENGLISH

Condition: used, machine/vehicle number: ***YAMT13XX6K0104043, axle configuration: 3 axles, first registration: 01/2019, total length: 13,800 mm, total width: 2,550 mm, total height: 3,410 mm, suspension: air, tire size: 235/75 R17.5, color: other, Year of construction: 2019, Chassis Chassis height: 87 cm Diameter coupling pin / coupling plate: 2 inch Height of coupling pin / drawbar: 120 cm Special Transport 2-piece driving plates: ✓ Hydraulic ramps: ✓ Length of loading floor: 930 cm Length of ramps: 395 cm Length of swan neck: 415 cm Lowbed trailer: ✓ Max width: 300 cm (25 cm per side) Max. length: 1380 cm Expandable: ✓ Tank Fuel: ✓ NON-EU VEHICLE, REQUIRES CUSTOMS CLEARANCE // 3-axle semi-lowbed trailer with hydraulic ramps, Max design weights 49500 kg, ABS, Air suspension, Drum brakes, SAF axles, Tyres 235/75R17.5, 3rd axle steering axle. // Dimensions // Load bed lenght 930 cm, Load bed width 250 cm, Load bed height 87 cm, Gooseneck lenght 415 cm, Gooseneck floor height 148 cm, Kingpin height 120 cm, Kingpin diameter 2 inches, Ramp lenght 395 cm, Ramp width 80 cm // Shipment dimensions 1380x255x341 cm = More information = Axle configuration Tyre size: 235/75 R17.5 Make axles: Saf Gkedpfxju H D R Es Anqob Brakes: drum brakes Suspension: air suspension Axle 1: Double wheels; Tyre profile left outer: 60%; Tyre profile right outer: 60% Axle 2: Double wheels; Tyre profile left outer: 20%; Tyre profile right outer: 30% Axle 3: Double wheels; Steering; Tyre profile left outer: 55%; Tyre profile right outer: 50% Weights Empty weight: 10.040 kg Carrying capacity: 30.960 kg GVW: 41.000 kg Functional Make of bodywork: Faymonville Height of cargo floor: 87 cm Identification Registration number: C505325 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: excellent (used), first registration: 09/2015, loading space length: 20,180 mm, loading space width: 3,000 mm, color: other, Year of construction: 2015, Damages: none YAFTL2007F0017329 = More information = Empty weight: 13.600 kg Gkedoymrb Sopfx Anqob Carrying capacity: 28.400 kg GVW: 42.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: DW205AH = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, empty load weight: 11,300 kg, maximum load weight: 36,700 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,250 mm, suspension: air, tire size: 385/65 r 22,5, color: grey-black, Equipment: ABS, Loading platform: Loading platform with extendable design and pneumatically actuated locking mechanism. A fixed intermediate table, approximately 250 mm wide, is located on the center beam. 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles and tires: BPW axles and suspension, all axles hydro-mechanically steered. Disc brakes, technical axle load: 10,000 kg Air suspension with lifting and lowering valve Axle tool 6-fold tire configuration 385/65 R 22.5 Braking system: Braking system according to EU regulations with EBS-E (2S2M) Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for 24-ton lifting capacity (50-ton test load) Steel structure: Steel structure made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection bar at the front with 24N, 24S & 15-pole sockets Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, solid color in Novagrau. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint not possible. Included accessories: One bracket for warning signs including socket on the swan neck and on the rear panel on the left and right sides. Trailing axle control from the front and rear by means of a cable remote control via push buttons, with single-axle control. Electro-hydraulic unit 4 pieces of chocks with holder on the front panel 2" kingpin A galvanized steel front panel approximately 2,200 mm high Yellow-red air couplings on the galvanized connection bar at the front White reflector tape according to EU regulations on the side, on the extension, and at the rear, in red. European reflector plates (red-yellow) at the rear of the trailer Gksdpfxohlz Shj Anqeb One mudflap at the rear of the trailer Manual and description One bracket for a rotating beacon at the rear of the trailer Loading platform with approximately 30 mm thick wooden floor framed in omega profiles 10 pairs of pocket rails for plug-in rails 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform on the right side in the direction of travel 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container, an additional locking point is provided on the extension for a 45ft container. 5 pairs of pocket rail strips, mounted transversely in the loading platform, for plug-in rails 100 x 50 mm One galvanized bracket transversely under the loading platform (2,390 x 720 x 400 mm) Access ladder mounted on the right side in the direction of travel One tool box HDPE 1,200x500x480 at the front under the loading platform on the left side in the direction of travel Lift axle on the front axle with control via TEBS E depending on the current axle load and the current load condition Central lubrication system with 2 pumps BEKAMAX (Pico) with normal grease NLGI-2 and with a removable protective cover around the pump Reflector tape red/white in the extension of the loading platform A painte

Condition: used, color: red, Year of construction: 2018, Faymonville F-S42-2GXX. Godpjzyfzwjfx Anqskb Year: 2018. 12 tons Pendel-X axles. Max. weight: 49,000 kg. Kingpin load: 25,000 kg. 5.5 meters extendable. 2 x 25 cm widened, including widening mechanism. Zinc-coated. Hydr. detachable gooseneck. Aluminum boards on the neck. Hydr. suspension. Radio remote control. Excavator bridge: 3050 mm x 700 mm. 3 detachable floorboards. Hydraulic system on the trailer operates on NATO electricity. Dimensions: Neck: L: 3700 mm. W: 2500 mm. H: 1500 mm. Kingpin height: 1250 mm. Floor: L: 6850 mm. W: 2550 mm. H: 400 mm. Floor thickness: 230 mm. Rear of trailer: L: 3050 mm. W: 2550 mm. H: 950 mm. Tires: 245/70R17.5, 60% tread. ID No.: 494. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = Year of manufacture: 2018 GVW: 49,000 kg Extendable superstructure: Yes = Company Information = For more information:

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, suspension: air, tire size: 275/70R22,5, color: blue, Year of construction: 2022, = Additional Options and Accessories = - Air suspension = Notes = Faymonville F-S43-1AAF. Year: 2022. 12-ton BPW axles. Weight: 12,780 kg. Load capacity: 48,220 kg. Max. weight: 61,000 kg. Kingpin load: 25,000 kg. Power steering for 3 steering axles. Hydraulic system compatible with NATO. EBS ABS ALB. Radio remote control. 2 x extendable: - 7400 mm. - 7600 mm. Total 15 meters extendable! 1st axle is a lift axle. Air suspension. Stainless steel toolboxes. Zinc-coated. Floor dimensions: L: 13,600 mm. W: 2480 mm. H: 1550 mm. Kingpin height: 1250. Tires: 275/70R22.5, 80%. ID No.: 495. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = General Information Year of manufacture: 2022 Axle Configuration Tire size: 275/70R22.5 Axle brand: BPW Suspension: Air suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 12,000 kg; Steerable; Tire tread depth (left, inside): 80%; Tire tread depth (left, outside): 80%; Tire tread depth (right, inside): 80%; Tire tread depth (right, outside): 80% Rear axle 2: Twin tires; Max. axle load: 12,000 kg; Steerable; Tire tread depth (left, inside): 80%; Tire tread depth (left, outside): 80%; Tire tread depth (right, inside): 80%; Tire tread depth (right, outside): 80% Rear axle 3: Twin tires; Max. axle load: 12,000 kg; Steerable; Tire tread depth (left, inside): 80%; Tire tread depth (left, outside): 80%; Tire tread depth (right, inside): 80%; Tire tread depth (right, outside): 80% Weights Unladen weight: 12,780 kg Payload: 48,220 kg GVW: 61,000 kg Condition Technical condition: very good Gkjdozgbx Espfx Anqob Optical condition: very good = Company Information = For more information:

Condition: used, color: yellow, Year of construction: 2013, Faymonville STZ-3UB. Year: 2013. 10-ton SAF axles. Weight: 12,300 kg. Load capacity: 29,700 kg. Maximum weight: 42,000 kg. Kingpin load: 18,000 kg. Power steering on 3 steering axles. Slotted floor. Winch. Aluminum boarding on the neck. Hydraulic system from trailer operates with NATO connectors. Radio remote control. Air suspension. Gkedezyaxkepfx Anqob Hydraulic bridge from floor to neck. Length: 3,000 mm. 2-point hydraulic outriggers at the rear. 2-way hydraulic ramps: Length: 2,800 + 1,700 mm. Dimensions: Neck: L: 3,750 mm. W: 2,500 mm. H: 1,380 mm. Kingpin height: 1,150 mm. Floor: L: 9,600 mm. W: 2,550 mm. H: 900 mm. Tires: 245/70R17.5, 80%. ID No.: 676. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of manufacture: 2013 Unladen weight: 12,300 kg Payload: 29,700 kg GVWR: 42,000 kg = Company information = For more information:

Condition: used, overall weight: 50,100 kg, axle configuration: 3 axles, first registration: 01/2020, loading space length: 13,500 mm, loading space width: 2,500 mm, total width: 2,540 mm, total height: 3,380 mm, Equipment: ABS, Vehicle identification number: YAMT23XX3K0104337 TELESCOPICALLY EXTENDABLE to 7,300 mm WADER CONTAINER POCKETS for 1 x 20", 2 x 20", 1 x 40", accommodating 45" containers DE HU 09/2026 - SP 03/2027 SAF axles with drum brakes 3 x forced-steering axles, hydro-mechanically controlled with cable control + remote control Platform dimensions: 13,500 mm (500 mm of which is beveled) - loading height: 1,100 mm Mounting rail for ramps (Ramps NOT included) Saddle height 950 - 1,050 mm Rear turning radius: 2,100 mm Stanchion pockets in the floor, including stanchions (completeness not guaranteed) NATO socket - electro-hydraulic unit Extension lighting Toolbox Central lubrication system Tires: 235/75 R 17.5 Spare wheel holder WITH spare wheel Changes, prior sale and errors expressly reserved. The description serves for the general identification of the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase agreement is binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle may be covered with and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. Gjdpfx Aezn Drwsnqskb

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 03/2003, loading space length: 12,500 mm, loading space width: 2,550 mm, loading space height: 1,620 mm, total length: 12,500 mm, total width: 2,550 mm, total height: 1,620 mm, suspension: hydraulics, tire size: 275 / 70 R22.5, color: beige, Year of construction: 2003, Axle Configuration Tire size: 275 / 70 R22.5 Axle brand: SAF Suspension: hydraulic suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 10,000 kg; Steerable Rear axle 2: Twin tires; Max. axle load: 10,000 kg Rear axle 3: Twin tires; Max. axle load: 10,000 kg; Steerable Rear axle 4: Twin tires; Max. axle load: 10,000 kg; Steerable Rear axle 5: Twin tires; Max. axle load: 10,000 kg; Steerable Weights Unladen weight: 13,100 kg Payload: 61,900 kg GVW: 75,000 kg Functional Gkedpfxouu E S Se Anqsb Loading platform height: 162 cm Condition Technical condition: very good Optical condition: very good Financial Information Price: Upon request

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, suspension: hydraulics, tire size: 245/70R17,5, color: grey, Year of construction: 2016, Faymonville F-S42-2ACB. Year: 2016. 12-ton SAF Pendel-X axles. Weight: 12,700 kg. Load capacity: 36,300 kg. Max. weight: 49,000 kg. Kingpin load: 25,000 kg. 4.2-meter extendable. 3-meter extensions. 2 x 25 cm widened, including widening mechanism. Hydraulic suspension. Hydraulic detachable gooseneck. Hydraulics operate on NATO standard. Radio remote control. EBS ABS ALB. Aluminum boards on the neck. 3 detachable floor sections. Zinc-coated. Dimensions: Neck: L: 3700 mm. W: 2480 mm. H: 1600 mm. Kingpin height: 1200 mm. Floor: L: 6350 mm. W: 2550 mm. H: 350 mm. Floor thickness: 220 mm. Rear section of trailer: L: 2600 mm. W: 2550 mm. H: 1000 mm. Tires: 245/70R17.5, 70% tread. German trailer! ID No.: 565. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as to all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = General Information Year of construction: 2016 Axle Configuration Tire size: 245/70R17.5 Axle brand: SAF Pendel-X Suspension: Hydraulic suspension Rear axle 1: Double tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Rear axle 2: Double tires; Max. axle load: 12,000 kg; Steered; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70% Weights Gkjdpozp Nrrjfx Anqeb Empty weight: 12,700 kg Payload: 36,300 kg GVW: 49,000 kg Condition Technical condition: good Optical condition: good = Company Information = For more information:

Condition: used, color: red, Year of construction: 2016, Faymonville F-S43-1BGS. Year: 2016. 9-ton SAF axles. Weight: 9,030 kg. Max. weight: 45,000 kg. Kingpin load: 18,000 kg. 7.5 meters extendable. Hydraulic system operates via NATO coupling from the truck. EBS ABS ALB. Radio remote control. Power steering for 3 steering axles. Air suspension. Preparation for twist locks. Floor dimensions: L: 13,600 mm. W: 2,550 mm. H: 1,480 mm. Tires: 385/65R22.5, 50% tread. ID No.: 561. Gkedpfxezybx Ej Anqeb The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as to all agreements entered into by Heinhuis and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of manufacture: 2016 Unladen weight: 9,030 kg Payload: 35,970 kg GVW: 45,000 kg Extendable platform: Yes = Company information = For more information:

Condition: used, color: yellow, Year of construction: 2013, Faymonville STZ-3UB. Year: 2013. 10-ton SAF axles. Weight: 12,300 kg. Load capacity: 29,700 kg. Maximum weight: 42,000 kg. Kingpin load: 18,000 kg. Power steering on 3 steering axles. Slotted floor. Gedpfx Anjzybhyeqekb Winch. Aluminum boards on the gooseneck. Hydraulic system from the trailer operates on NATO couplings. Radio remote control. Air suspension. Hydraulic bridge extending from the floor to the gooseneck. Length: 3,000 mm. 2-point hydraulic outriggers at the rear. 2-way hydraulic ramps: Length: 2,800 + 1,700 mm. Dimensions: Gooseneck: L: 3,750 mm. W: 2,500 mm. H: 1,380 mm. Kingpin height: 1,150 mm. Floor: L: 9,600 mm. W: 2,550 mm. H: 900 mm. Tires: 245/70R17.5, 80% remaining. ID No.: 436. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as all agreements entered into by Heinhuis and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of manufacture: 2013 Unladen weight: 12,300 kg Payload: 29,700 kg GVWR: 42,000 kg = Company Information = For more information: