FAYMONVILLE STZ-4U - 81T - 3 HYDR STEERING AXLES - 11m LOWDBED !! - FULL RAMP - SAF - AIR SUSP. - NL

FAYMONVILLE STZ-4U - 81T - 3 HYDR STEERING AXLES - 11m LOWD...

Condition: used, mileage: 294,049 km, power: 353 kW (479.95 HP), first registration: 03/2008, fuel type: diesel, tire size: 385/55R22.5, tire condition: 25 %, axle configuration: 8x4, wheelbase: 5,100 mm, fuel: diesel, brakes: retarder, gearing type: semi-automatic, number of gears: 12, suspension: air, total length: 9,200 mm, total height: 3,000 mm, loading space length: 6,800 mm, Equipment: air conditioning, retarder, tachograph, = Additional options and accessories = - Digital tachograph - Visor = Remarks = full air 8x2 retarder 294000km place for crane = More information = Technical information Engine capacity: 11.700 cc Axle configuration Tyre profile: 25% Suspension: air suspension Front axle 1: Tyre size: 385/55R22.5; Steering Front axle 2: Tyre size: 385/55R22.5 Rear axle 1: Tyre size: 315/70R22.5 Rear axle 2: Tyre size: 315/70R22.5 Weights Empty weight: 23.200 kg Carrying capacity: 8.800 kg GVW: 32.000 kg Bljdpfsz Nubwjx Adwop = Dealer information = Please mention always the stocknumber by your demands ( 8 digits) Buying with Smz-Smeets & Zonen : - since 1976 in business : trustable company/selling17000 units yearly/65.000 units sold; 1000 on stock. - service A-Z worldwide, Top loadings for cheaper transport. Worldwide shipping- transit plates (not included) - selling all new + used parts tyres, oils : We advertise with our lowest prices. Check to see our complete stock and specials we are located on a 130.000m2 , 20.000m2 storage,work and bodyshop fully equiped. See our company video:

Condition: used, axle configuration: > 3 axles, Year of construction: 2009 Empty weight: 16.800 kg Blsdpozhu A Hsfx Adwep Carrying capacity: 54.200 kg GVW: 71.000 kg

Condition: new, empty load weight: 14,350 kg, maximum load weight: 53,450 kg, overall weight: 67,800 kg, axle configuration: > 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, tail-lift, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel, approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform and into the bevel to accommodate the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm Two-Part Steel Ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps individually hydraulically movable approx. 235 mm outwards and approx. 215 mm inwards - "Super Grip" 25 mm rubber floor and steel plate floor approx. 5 mm as additional reinforcement on the platform bevel - Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - BPW axles and suspension, 1st axle steerable, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire pressure sensors installed in all wheels including spare wheels Surface Treatment: - Complete steel construction blasted automatically with a shot blast machine after welding - Second shot blasting with corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure best corrosion protection - Final painting with 2 coats of 2K topcoat, single color in MB 7350 Novagrau Accessories Included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches - 1 spare wheel - Outer beam on gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of lying lashing rings at the rear of the gooseneck - 1 pair of removable ALU side walls on the gooseneck, approx. 400 mm high, anodized - 1 removable ALU rear wall on the gooseneck, approx. 400 mm high, anodized - Approx. 40 mm thick hardwood floor over the gooseneck, tread plate covering over the king pin - 2" king pin - Round NATO socket on the front connector strip - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front crossmember - 8 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards - Extensions (galvanized) extendable by approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm in front of the axles, continuously open up to the gooseneck crossmember, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm between the first and second axles, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging elements for the extension or as extension beams - 1 pair of mechanical rear supports - Radio and cable remote control - Lift axle at the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board System - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm Bedpfsya E A Nsx Adwolp

Condition: used, mileage: 201,000 km, power: 353 kW (479.95 HP), first registration: 09/2023, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: yellow, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, IVECO X WAY 480 TIPPER / 8x4 Imported / Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2023 ? MILAGE: 201 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? AIRCONDITION ? POWER STEERING Bodpfx Ado Afbcrswolp ? TACHOGRAPH ? RETARDER CAPACITY: 20 000 kg TOTAL WEIGHT: 32 000 kg TIRE SIZE: 13R22,5 WHEELBASE: 187/237/138 cm SUSPENSION: SPRING TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 62949

Condition: used, axle configuration: > 3 axles, first registration: 02/2002, total length: 14,150 mm, total width: 2,520 mm, Additional information : Brand: NOOTEBOOM Model: MCO-58-04V Structure: low loader ( platform 9900 mm mm extendable / loading height 860 mm / ramps 2800 mm / all steered axles ) Year: 01.2002 Suspension: hydraulic Brakes: drum Dimensions: L/W: 14150 mm / 2520 mm Masses: full / empty: 58000 kg / 12920 kg Brakes : Drum Brakes : Drum Steering : Steering Brakes : Drum Steering : Steering Brakes : Drum Steering : Steering = More information = Bjdpfx Adowaznvjwolp Middle axle 1: Steering Middle axle 2: Steering Rear axle: Steering Empty weight: 12.920 kg Carrying capacity: 45.080 kg GVW: 58.000 kg Please contact Andrei Somov, Mark Ševtšenko, Alejandro Goyeneche, Deniss Urmaker or Hesham Haddad for more information

Condition: used, maximum load weight: 10,500 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 10/2010, loading space length: 6,015 mm, loading space width: 1,925 mm, loading space height: 420 mm, loading space volume: 5 m³, total length: 8,450 mm, total width: 2,550 mm, total height: 2,600 mm, Equipment: ABS, Low-loader trailer, steel sideboards 420mm, robust, walkable steel fenders, full-width loading ramp (W x H) 1925x2000 mm, with spring-assisted lifting mechanism, sloping loading platform at the rear – 1,020 mm, wooden plank floor, 5 pairs of recessed lashing eyes, ABS, height-adjustable drawbar, BPW EcoPlus axle(s), drum brake system, "haacon" support jacks, 2x storage boxes, leaf spring suspension. The vehicle can be fitted with advertising or lettering. SI87391 Our offer generally does not include a new TÜV (technical inspection) certificate. If a new TÜV certificate is required, we will be happy to provide you with a quote from our partner workshops! The vehicle can be fitted with advertising or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to prepare a financing or leasing offer for this item. Bljdpfx Adsz Swhfowsp Please contact us!