Used Müller-Mitteltal Interchangeable Chassis / Swap Chassis for sale (266)

Condition: used, empty load weight: 3,750 kg, maximum load weight: 14,250 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/1993, total length: 9,300 mm, total width: 2,450 mm, total height: 1,500 mm, suspension: steel, tire size: 385 / 65 R 22,5, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, leaf spring suspension, ABS (anti-lock braking system), side aluminum fender. Ndodpfx Agji Rmktjxsa Body: 6.0 to 7.0m container, mechanical locking. ACCESSORY INFORMATION IS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, empty load weight: 5,150 kg, maximum load weight: 12,850 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2007, loading space length: 7,550 mm, loading space width: 2,470 mm, loading space height: 600 mm, suspension: air, tire size: 235/75R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, turntable, air suspension, lift and lower function, ABS (anti-lock braking system), lashing eyes, container locking mechanism, U-shaped protection, side aluminum fender, twin tires, storage compartment, swing-out tailgates. Superstructure: 2-axle flatbed trailer with aluminum sideboards and twist-lock locking mechanisms, 2x BPW axles, drum brakes! Nedpfx Aox A H S Asgxoda Loading height approximately 950mm! Used sparingly, in excellent condition! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, maximum load weight: 23,900 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 06/2007, Year of construction: 2007, Internal vehicle number: G400178 Available immediately at our yard in Kaufungen More information: Luis Lucena Viktoria Sologubova Müller-Mitteltal TS2 KOMPAKT low-loader trailer – 2 axles – hydraulic ramps Robust Müller-Mitteltal TS2 KOMPAKT low-loader trailer from 2007. This 2-axle trailer features hydraulic loading ramps, air suspension, and a payload capacity of 23,900 kg. With a permissible gross weight of 31,000 kg, it is ideally suited for transporting heavy construction and industrial machinery. Technical data: * Vehicle number: G400178 * Vehicle condition: Used * Category: Low-loader trailer * Manufacturer: Müller-Mitteltal * Model: TS2 KOMPAKT * First registration: 06/2007 * Year of manufacture: 2007 * Axles: 2 * Permissible gross weight: 31,000 kg * Unladen weight: 7,100 kg * Payload: 23,900 kg * Overall length: 10,800 mm * German vehicle Equipment: * Hydraulic loading ramps * Air suspension * 2-axle chassis * Robust low-loader design Inspection and functional testing possible by prior appointment. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale. We will gladly accept your used vehicle as part of the payment. Nsdpfxjzahg Ds Agxjda Financing directly with us is possible. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, axle configuration: 2 axles, first registration: 02/1992, Year of construction: 1992, Equipment: ABS, Empty weight: 3.140 kg Nedpfx Aext Sd Ssgxsda Carrying capacity: 14.860 kg GVW: 18.000 kg Selling price: € 1.500, US$ 1.730 Purchase on credit is possible: Yes

Condition: used, axle configuration: 2 axles, first registration: 09/1993, Year of construction: 1993, Equipment: ABS, = Additional options and accessories = - EBS Ndedsxt Rw Rspfx Agxsa = More information = Empty weight: 4.600 kg Carrying capacity: 13.400 kg GVW: 18.000 kg Selling price: € 6.500, US$ 7.498 Tyre tread remainder on axle rear: 50% Make of axle rear: BPW Purchase on credit is possible: Yes

Condition: used, empty load weight: 3,100 kg, maximum load weight: 7,400 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 10/2004, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 400 mm, suspension: steel, tire size: 235/75R17.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: en route / in transit, steel construction, 2 axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, side protection, front support, storage box, swing-out tailgates, adjustable drawbar. Ndsdpfsztrw Sjx Agxoa Construction: Tandem 3-sided tipper trailer. All information is provided without guarantee as the trailer is currently en route! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, first registration: 10/2014, overall weight: 27,000 kg, empty load weight: 5,100 kg, color: grey, gearing type: other, emission class: none, Year of construction: 2014, maximum load weight: 21,900 kg, next inspection (TÜV): 03/2027, suspension: steel, tire size: 265/70 R19.5, front tire size: 265/70 R19.5, rear tire size: 265/70 R19.5, driver cabin: other, Equipment: ABS, additional headlights, chassis, compressed air brake, electronic stability program (ESP), fog lights, lighting, truck registration, Müller Mitteltal 3-axle trailer for skip loaders TM 2 24.0 * Mounting for 2 x 12 m³ containers/skip loaders * Lowerable pneumatic drawbar for front loading Nodpjzbbbdefx Agxeda * Adjustable anchor point for container mounting * Manual lashing with ratchets * Sealed floor * BPW axles * Leaf spring suspension * Frame/chassis galvanized * Drum brakes * Wear plates * Additional spotlights * 7 lashing eyes per side, located on the outside * Large toolbox * Weights: GVWR - 27,000 kg, Unladen weight - 5,170 kg, Payload - 21,830 kg * German vehicle with German documentation!! * First owner!! * First registration: 10/21/2014 * MOT valid until 03/2027 * Inspection valid until 09/2026 * VIN: WMM00000E0058208 Subject to prior sale, errors and changes! Some company logos have been removed from the images – please inquire! Function of extras without guarantee! Your contact: Christoph Ott Tel. + WhatsApp:

Condition: used, axle configuration: 3 axles, first registration: 06/2007, color: blue, Year of construction: 2007, Equipment: ABS, = Additional options and accessories = - Central lubrication - Twin wheels = More information = Financial information Selling price: € 14.900, US$ 17.220 VAT/margin: VAT qualifying Other information Tyre tread remainder on axle 1: 60% Brake type on axle 1: drum Make of axle 1: BPW Suspension on axle 1: spring Tyre tread remainder on axle 2: 60% Brake type on axle 2: drum Make of axle 2: BPW Suspension on axle 2: spring Tyre tread remainder on axle 3: 60% Brake type on axle 3: drum Make of axle 3: BPW Suspension on axle 3: spring Tyre tread remainder on axle rear: 60% Ndedpfx Aezr H Rdsgxja Brake type on axle rear: drum Make of axle rear: BPW Suspension on axle rear: spring Purchase on credit is possible: Yes Purchase by installments is possible: Yes Leasing is possible: Yes

Condition: used, empty load weight: 3,110 kg, maximum load weight: 9,490 kg, overall weight: 12,600 kg, axle configuration: 2 axles, first registration: 05/2016, loading space length: 4,550 mm, loading space width: 2,380 mm, loading space height: 600 mm, suspension: steel, tire size: 285/70R19.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel superstructure, 2 axles, turntable, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, storage box, drop-down side panels. Ndsdpewth Iiofx Agxea Superstructure: 2-axle, 3-sided tipper trailer, Gigant axles, drum brakes, frame hot-dip galvanized, automatic tailgate opening, 12 & 24V lighting! Loading height approx. 1290mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, empty load weight: 3,650 kg, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 07/2011, loading space length: 5,000 mm, loading space width: 2,430 mm, loading space height: 900 mm, suspension: air, tire size: 285/70R19.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, tandem axle, air suspension, ABS (anti-lock braking system), tailgate, lashing eyes, side guards, front supports, rear supports, swing-out tailgates, adjustable drawbar. Body: Tandem 3-sided tipper trailer with aluminum side walls, 2x Gigant axles, drum brakes! Nedpfx Aszr H Ngegxjda Loading ramps available for an additional charge of €990.00 net! ACCESSORY INFORMATION IS WITHOUT GUARANTEE; subject to changes, prior sale and errors!

Condition: new, maximum load weight: 6,870 kg, overall weight: 9,900 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brake * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange drawbar: * Drawbar with 40 mm threaded drawbar coupling (height-adjustable in mm) ----Electrical system / Lighting: * 15-pole power plug * LED lighting * Flashing LED side marker lights * TPMS tire pressure monitoring system Ndodpsu I Iqxefx Agxja ----General components: * Front support jack * Spring-supported square tube supports at the rear with base plate, safety locking pins for different support heights * Closed mudguards made of sheet steel with splash protection * Closed side impact protection, can be used as an advertising space * Plastic tool box with base insert (horizontal installation) approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, width between the drum arms 1,700 mm with a clamping device to secure the drum at the ends of the support arms, and a locking mechanism for the cable drum superstructure with the chassis using a centrally arranged claw lock * Motor-hydraulic drum drive with oil motor * Valves and sliding, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotatable ends * 1 pair of centering cones made of polyamide, stepped ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Pump unit: * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Painting: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf

Condition: new, maximum load weight: 6,870 kg, overall weight: 8,800 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brake * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange coupling: * Drawbar with 40 mm screwed coupling (height-adjustable, in mm) ----Electrical system / Lighting: * 15-pole power connector * LED lighting * Flashing LED side marker lights * TPMS (Tire Pressure Monitoring System) ----General components: * Front support jack * Spring-assisted square tube supports at the rear with base plate, safety locking pins for various support heights * Closed steel sheet fenders with splash guards * Closed side impact protection, usable as an advertising space * Plastic toolbox with base insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, width between the drum arms 1,700 mm with a clamping mechanism to secure the drum at the end of the support arms, and a locking mechanism for the cable drum superstructure with the chassis by means of a centrally arranged claw lock * Motor-hydraulic drum drive with oil motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed control and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of centering cones made of polyamide, stepped ----Chassis: * Chassis made of torsionally rigid square tubes and cross members ----Pump - Unit: * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale are subject to change ----Delivery time: * Available for immediate delivery from Egestorf Ndjdeu I Iqljpfx Agxea

Condition: new, maximum load weight: 6,870 kg, overall weight: 9,900 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brake * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange drawbar: * Drawbar with 40 mm threaded drawbar eye (height-adjustable in mm) ----Electrical system / Lighting: * 15-pole electrical connector * LED lighting * Flashing LED side marker lights * TPMS (Tire Pressure Monitoring System) ----General components: * Front support winch * Spring-assisted square tube supports at the rear with base plate, safety locking pins for various support heights * Enclosed fenders made of sheet steel with splash guard * Enclosed side impact protection, can be used as an advertising surface * Plastic toolbox with bottom insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, width between the drum arms 1,700 mm, with clamping mechanism for securing the drum at the ends of the support arms, as well as a locking mechanism of the cable drum superstructure to the chassis by means of a centrally arranged claw lock * Motor-hydraulic drum drive with oil motor * Valves and sliding, rubber-coated drive rollers * Hydraulic speed control and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of centering cones made of polyamide, stepped ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Pump unit: * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 Nedpfx Agsu I Iq Ejxsda ----Unladen weight: * 2,690 kg unladen weight ----Paint finish: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf

Condition: new, maximum load weight: 6,900 kg, overall weight: 9,900 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brake ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Electrical System / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights ----Drawbar / Flange Coupling: * Drawbar with 40 mm screw coupling (height adjustable in mm) ----General Components: * Front support jack * Spring-supported square tube supports at the rear with base plate, safety locking pins for different support heights * Closed steel sheet mudguards with splash protection * Closed side impact protection, usable as an advertising area * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, width between the drum arms 1,700 mm, with tensioning closure for securing the drum at the ends of the support arms, as well as a locking mechanism for the cable drum superstructure with the chassis via a centrally arranged claw lock * Motor-hydraulic drum drive with oil motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, with centering and rotatable ends * 1 pair of centering cones made of polyamide, stepped arrangement * Preparation of steel structure and hydraulics for retrofitting a separate motor ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Hydraulics: * Hydraulic line for supply and return ----Tires: * 315/80 R 22.5 tires ----Painting: * Vehicle is hot-dip galvanized ----Information: * 2,690 kg unladen weight * New vehicle with full manufacturer warranty * Errors and prior sale excepted Nodpfx Agsxyniwoxeda ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 29,850 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 8,000 mm, loading space width: 2,520 mm, Year of construction: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Last axle as a trailing steering axle with electro-pneumatic steering lock activated by PIN in reverse gear * Additional lock for the trailing axle, operable from the driver's cab for maneuvering purposes – without truck-side installation – assigned to PIN 10; the lock must be disengaged before driving on public roads ----Suspension: * Air suspension with lift and lower function and RtR (Ride to Reduce) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's display via EBS signal – without truck-side installation * LED tail lights 12 / 24 V * Flashing side marker lights * LED reverse lights activated by reverse gear * SmartBoard installed as info tool with pressure sensors solely for total axle load display * 7-pin socket at the rear for illumination of overlength loads * LED beacon (removable) at the rear ----General Attachments: * Aluminum air tanks * Manual crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connection lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Lowbed Platform: * 50 mm thick flooring made from larch / Douglas fir instead of spruce / fir * Rear slope – 700 mm long – on the semi-trailer deck to the low bed with checker plate covering and at the end a perforated strip for attaching aluminum drive-on ramps * Tread plate cover over the wheels * SP combo package: toolbox with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum color, mounted on the semi-trailer platform approx. 2,480 x 500 mm * Hinged lid on top and side doors in the angled corners * Fold-down aluminum side boards, 500 mm high on the trailer platform, incl. foldable and removable rear stanchions * Plug-in aluminum rear wall, 150 mm high * 2nd kingpin position * Preparation for container locks * Preparation for 3 receiving pockets in the transition slope from lowbed to gooseneck * Preparation for retrofitting folding outriggers to achieve 3-meter width, including welded-in mounting brackets in the outer frame ----Load Securing: Semi-trailer platform: * 50 mm holes in the front corners and front for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor at the side near the approach slope * Perforated, 45°-bent outer frame with hole pattern for lashing equipment (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t retractable lashing rings recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings recessed centrally just in front of the approach slope to the gooseneck * Each side with 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings recessed into the outer frame * Each side with 4 stake pockets recessed into the outer frame * Profifix lashing rail in the center longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From end of last rigid axle to end cross member B = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings welded in place in the excavator arm rest) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminum drive-on ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t/pair) * Hydraulic ramp shifting on sliding tube of the ramp shaft Nodpfx Ageykx I Hoxeda ----Hydraulics: * Hydraulic flow divider in the trail

Condition: new, maximum load weight: 29,850 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 8,000 mm, loading space width: 2,520 mm, Year of construction: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Rear axle as a trailing steering axle with electro-pneumatic steering lock activated by PIN when reverse gear is selected * Additional lock for the trailing axle, operated from the driver's cab for maneuvering purposes – no truck-side installation required – assigned to PIN 10. The lock must be deactivated before driving on public roads ----Suspension: * Air suspension with lifting and lowering function as well as RtR (Ride to Recover) function ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – no truck-side installation required * LED tail lights 12 / 24 V * Flashing side marker lights * LED reversing lights switched via reverse gear * SmartBoard installed as info tool with pressure sensors exclusively for total axle load display * 7-pin socket at the rear for overlength lighting * Removable LED rotating beacon at the rear ----General attachments: * Aluminum air tanks * Mechanical crank landing legs * Galvanized steel mudguards * Swivel arm as a carrier for connection lines mounted in front of the front panel ----Warning package: * Mechanically adjustable warning sign package ----Low-bed platform: * 50 mm flooring made of larch / Douglas fir instead of spruce / fir * Rear slope – 700 mm long – on the gooseneck deck to the low-bed with checker plate covering, and perforated strip at the end for attaching aluminum approach ramps * Tread plate cover over wheels * SP-Combo package: toolbox with 45° corners, made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, mounted on the platform approx. 2,480 x 500 mm * Flip-top lid as well as side doors in the slanted corners * Folding aluminum side walls 500 mm high on the platform, incl. folding and removable rear stanchions * Plug-in aluminum rear wall 150 mm high * Second kingpin position * Preparation for container lock * Preparation for 3 insert pockets in the inclined ramp from low-bed to gooseneck * Preparation for retrofitting folding outriggers for 3 m widening by welding the mounting brackets into the outer frame ----Load securing: Njdpfx Aoykx I Togxjda Fifth wheel platform: * In the front corners and at the front, 50 mm holes for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor on the side at the approach slope * Perforated and bent 45° outer frame with hole pattern for lashing equipment (2 t lashing points every 480 mm) * On each side: 2 x 6.3 t retractable lashing rings recessed into the outer frame Low-bed platform: * 2 x 16.5 t lashing rings recessed centrally directly in front of the approach slope to the gooseneck * On each side: 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings recessed into the outer frame * On each side: 4 stanchion pockets recessed into the outer frame * Profifix lashing rail centered in the longitudinal axis (lashing point 3 t per securing circle) ----Excavator arm trough: * From the end of the last rigid axle to the end cross member B = 770 mm, D = 270 mm (on each side 2 x 6.4 t lashing rings for the excavator arm trough, permanently welded) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminum approach ramps approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t per pair) * Hydraulic ramp shifting on sliding pipe of the ramp shaft ----Hydraulics: * Hydraulic flow

Condition: used, first registration: 06/1998, overall weight: 18,000 kg, empty load weight: 4,200 kg, color: beige, gearing type: other, emission class: none, operating hours: 8,640 h, maximum load weight: 13,800 kg, next inspection (TÜV): 09/2026, suspension: steel, loading space length: 7,100 mm, loading space width: 2,470 mm, tire size: 235/75 R17.5, front tire size: 235/75 R17.5, rear tire size: 235/75 R17.5, driver cabin: other, Equipment: additional headlights, chassis, compressed air brake, fog lights, lighting, truck registration, Müller Mitteltal 2-axle (formerly a container) platform/flatbed trailer TM 2 * SAF axles * Twin tires * Leaf spring suspension Ndjdpfxjzrh E Aj Agxsa * Tires: 235/75 R17.5 * Excellent remaining tread depth * 2 toolboxes on the right * DUO-Matic connection * 50 mm drawbar eye * Side stops for containers * Various lashing points on the sides * Loading height: 1.04 m * Dimensions: L - 7.10 m, W - 2.47 m * Weights: GVWR - 18,000 kg, GAWR - 4,200 kg, Net weight - 13,800 kg * German vehicle with German documents!! * First owner!! * First registration: 19.06.1998 * MOT valid until 09/2026 * Inspection valid until 03/2026 * VIN: WMM00000W0042223 Subject to prior sale, errors and changes! Company logos have been partially removed from the images – please inquire! Functionality of extras without guarantee! Your contact person: Christoph Ott Tel. + WhatsApp:

Condition: used, axle configuration: 3 axles, Year of construction: 2015, = Additional Options and Accessories = - Air suspension, rear - Air suspension, front - Central lubrication system = Notes = WE SPEAK RUSSIAN - Yuriy mobile: 3-axle, low-bed semi-trailer, drop-deck design. Fifth wheel platform approx. 3,900 x 2,550 mm with aluminum side walls, low-bed platform approx. 9,050 x 2,550 mm, 4 wheel recesses with extension sections, recesses at the front approx. 390 mm, at the rear approx. 290 mm, wheelbase center-to-center approx. 3,100 mm, excavator arm rest. Loading height approx. 900 mm. 34 lashing points, foldable widening sections to 3,000 mm, warning package for overwidth loads. Hydraulic ramps, two-part, approx. 4,300 x 720 mm with rubber coating, hydraulically adjustable, BPW axles, 3 axles hydraulically steered, including remote control, EBS, air suspension, lift axle. Permissible total weight 48,000 kg, fifth wheel load 18,000 kg, payload 35,350 kg. Fifth wheel pin 2 inches, fifth wheel height approx. 1,250 mm. Toolbox on the fifth wheel platform. Tires 235-75R17.5. 2-line air, hydraulic pump unit. Central lubrication. Paint finish MB 5361, gentian blue. Valid MOT until 07-2027. = Further Information = Unladen weight: 12,650 kg Payload: 35,350 kg GVW: 48,000 kg Tires, front: 235-75R17.5 Tires, rear: 235-75R17.5 Nedpfxozq Rg Hs Agxjda Country of origin: DE Please contact Jan-Marc Schwickert for further information.

Condition: new, maximum load weight: 23,210 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, * T 3: * EBS braking system * Emergency release device for spring accumulators * Drum brakes * 3 x 11-ton BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign panels at the front and rear * Front axle with closed plastic mudguards and rear axle with straight, galvanized steel splash guards, each with splash protection * Reflective contour strip on the sides and at the rear * Folding cover (hot-dip galvanized) for the toolbox in the turntable platform * Toolbox made of galvanized steel sheet, approx. 650 x 300 x 600 mm - black powder-coated - located on the side under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and locking clamp * 4 lashing pockets on each side (but no lashing bars included) with simultaneous lashing capability * Lashing package consisting of: 2 lashing eyes (6.4 tons) at the front left and right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swivel and lowerable * Load-bearing in all directions and embedded in the outer frame in the corners, 13.4 tons, otherwise 10 tons * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope) * Extension boards under the loading platform, stored in a storage compartment * Excavator arm support over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4-ton lashing rings on the side in the excavator arm support) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable front section and load holding check valves, hydraulic lateral ramp adjustment * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of more than 40 liters up to a maximum of 140 liters / min.), dual-line hydraulics * Loading area above the slewing ring: approx. 1,960 x 2,520 mm Ndjdpstplwfjfx Agxea * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm access ramp) * Loading height when loaded approx. 860 mm +/- 30 mm compensation unit * Chassis, turntable, folding outriggers, rear support legs and access ramps hot-dip galvanized. * Axles, springs, drawbar, air tank, etc. painted in a black tone. * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 23,210 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, * T 3: * EBS braking system * Emergency release device for spring accumulators * Drum brakes * 3 x 11 tons BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side impact protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic fenders and rear axle with straight, galvanized steel splash guards, each with splash protection * Reflective contour strip on the sides and rear Ndjdpeq Dyv Iefx Agxja * Hinged cover (hot-dip galvanized) for the toolbox in the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm - black powder coated - mounted on the side under the chassis * 15-pole power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via coil spring and tension lock * 4 lashing pockets on each side (but no lashing bars included) with simultaneous lashing capability * La-Si package consisting of: 2 lashing eyes (6.4 tons) at the front left and right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swivel and lowerable * Loadable in all directions and embedded in the outer frame in the corners, 13.4 tons, otherwise 10 tons * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear slope) * Extension boards under the loading area, stored in a storage compartment * Excavator arm support over the rear axle up to the end member, approx. 2,100 mm long (2 pairs of 6.4 tons lashing rings on the side in the excavator arm support) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable front section and load-holding check valves, hydraulic side ramp adjustment * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 liters up to max. 140 liters / min), dual-line hydraulics * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach ramp) * Loading height when loaded approx. 860 mm +/- 30 mm compensating unit * Chassis, turntable, folding outriggers, rear support legs and loading ramps hot-dip galvanized. * Axles, springs, drawbar, air tank, etc. painted in a black tone * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Year of construction: 2026, Equipment: ABS, tail-lift, * Müller?Mitteltal KA-TA-R 11,9 Tandem low-loader, three-sided tipping trailer with extension sideboards + aluminum ramps * Item number for inquiry: 31943, available starting in September 2026 * Archive photos * NEW VEHICLE in RAL 9016 traffic white * 5m x 2.42m x 0.5m Ndodozqh Axopfx Agxsa * + 0.5m steel extensions, 3 sides, pivoting, foldable, and removable, painted with spring lift and central locking (locking mechanism galvanized) * Tipping bed galvanized * Two-step access ladder in front of the front wall (galvanized) * Lockable compartment under the tipping bridge for the access ramp * Lashing ropes for the rear wall * Aluminum access ramps, 8t pair, 3.57m long * 2 LED reversing lights on the rear * Chassis hot-dip galvanized * 4 UVV lashing rings LC 5000daN front and rear + 8 recessed and foldable lashing eyes LC 3000daN in the tipping bed (centered) * Side marker lights with turn signal control * Tool box 750x350x300mm * Drawbar continuously adjustable in height, hot-dip galvanized, drawbar eye 40mm * Wide tires 385/55R 19.5 (4 units), BPW axles, parabolic springs * LED lighting system for 12 and/or 24 V * Net hooks * EBS with tire pressure monitoring * EBS multi-voltage system for towing vehicles with 12V and 24V * We are a Müller-Mitteltal sales partner. * Lease-purchase example from our cooperation partner MMV Leasing: Euro 575 per month net for a term of 60 months, without a down payment and a residual value of "0" Euro * Other terms possible with or without a down payment/residual value. * Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of opening hours, we are available by appointment. We speak German, we speak English, mowimy po polsku, on parle français. * WhatsApp Leasing, financing, and trade-in options available.

Condition: used, maximum load weight: 15,100 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 03/1987, loading space length: 8,650 mm, loading space width: 2,480 mm, ? Mechanical ramps ? Loading height: approx. 910 mm ? Spare wheel holder Nedoyw Egwepfx Agxeda ? 40 mm towing eye ? Beacon ? Drum brakes ? Leaf suspension ? 1 x toolbox ? Twin tires ? SAF axles All information without guarantee / Subject to prior sale.

Condition: used, first registration: 11/2006, Year of construction: 2006, MÜLLER - MITTELTAL T4 Kompakt Turntable - Low-loader with air suspension and wheel recesses - 4 x air-suspended GIGANT axles - air suspension - 4 x wheel recesses Nodjwmpbdepfx Agxsda - mechanical loading ramps - 2 foldable rear supports - extendable warning panels - ABS - MICHELIN tyres: 235/75 R 17.5 - heavy-duty version: 40,000 kg GVW - unladen weight: 8,400 kg - overall length: 11,750 mm - 50 mm towing eye Particularly suitable for transporting lime milling machines! - German trailer - General inspection / safety test available on request and at extra cost! Subject to prior sale and errors!

Condition: new, maximum load weight: 15,970 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, ETÜ-TA-R 21.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axle: Ndsdpfx Ael Tihxegxja * 2 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange coupling: * Drawbar with 50 mm flange coupling and height-adjustable drawbar ----Lighting / Electrical System: * 15-pin power connector * LED lights 12/24 V * TPMS (Tire Pressure Monitoring System) ----General Components: * Jost support leg at the front * Outboard folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * Side underrun protection * Plastic quarter fenders ----Low-Loader Platform: * In front of the headboard and rear slope, provision for retrofitting container locking mechanisms for transporting 20" containers * Design for 21 tons GVW with reinforced frame and reinforced axles * Reinforcement package for drilling rig transport on the chassis * 50 mm hardwood floor in a clamped design * In front of the headboard, provision for retrofitting container locking mechanisms * Bolted headboard made of smooth sheet metal * Divided side walls made of steel sheet - trapezoid profile - foldable with folding mechanism in the middle * Steel rear wall can be slid between the ramps - bracket for storage when not in use inside in front of the headboard * Rear supports bolted ----Load Securing: * Perforated outer frame approx. 45 degrees angled, with 2 tons lashing force every 480 mm * Installation of 3 tons tie-down brackets every 600 mm possible * Profifix lashing rail in the longitudinal axis in the middle for lashing up to LC 3000 daN * In the corners at the front and rear, 1 x 10 tons lashing each * Lasi package with 2 x 8 tons lashing points each on the sides, recessed in the outer frame, various holes in the front and end beams for 1.2 tons lashing ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 3,000 x 620 mm (can be moved together to 20 mm) * Approach slope at the rear approx. 860 mm chassis ----Loading Heights: * Unloaded approx. 940 mm * Loaded approx. 910 mm ----Wheelbase / Tires: * 1,810 mm * Tires: 235/75R17.5 ----Paint: * Painting of the side walls in RAL - 9010 pure white * Drawbar, headboard, rear flap, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks and support leg painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf

Condition: new, Year of construction: 2026, Cable reel transport trailer. Permissible total weight 9,900 kg, payload 7,380 kg. Hydraulic lifting and lowering of the cable reel from the towing vehicle or by a 4-stroke gasoline engine, protective cover, reel drive hydraulically with rubber-coated drive rollers, reel diameter 800-3,000 mm, reel width up to 1,650 mm, centering cones for cable reels. Two-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tires 315-80R22.5, tire pressure monitoring. Tow hitch 40 mm, height-adjustable, 2-line air, lighting 12+24 V LED. Tool box. Vehicle completely hot-dip galvanized. New vehicle including factory warranty. = Further information = Unladen weight: 2,520 kg Ndodpfx Ajzp Dnbegxsa Payload: 7,380 kg GVW: 9,900 kg Condition of rear tires: 100 Front tires: 315-80R22.5 Rear tires: 315-80R22.5 Country of manufacture: DE Please contact Jan-Marc Schwickert for further information.