Used Faymonville Trailers for sale (182)

Condition: new, empty load weight: 10,600 kg, maximum load weight: 39,400 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 760 mm, suspension: air, tire size: 205/65 R17.5, color: grey, operation weight: 10,600 kg, Equipment: ABS, Gooseneck: -Gooseneck with hardwood covering, 30 mm thick -Gooseneck at the rear, straight design -3 pairs of lashing rings (LC 5,000 daN) Loading area in extendable design: -Loading area in extendable design -5 pairs of lashing rings that can be folded outwards -3 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the front of the loading area -Cutouts in the outer frame of the loading area for hanging tensioning straps -Hardwood covering, approx. 48 mm thick, checkered sheet covering over the axles Seatposts: -JOST seatposts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Axles and tires: -BPW axles, two axles rigid, two axles with self-steering -Air suspension, with drum brake, with lifting/lowering- Function -The self-steering axles with electro-magnetic reversing lock can be activated via reverse gear or manually -Axle tool -Tires 205/65 R17.5 Braking system: -Braking system in accordance with EU regulations with EBS-E (4S3M) Steel construction: -Steel construction made of high-strength fine-grain steels -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Electrical system: -Electrical system in accordance with EU regulations, lighting 24 volts, ASPÖCK-NORDIK (ASS3) -ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets -Connection in accordance with ISO: -24N ISO-1185 -24S ISO-3731 -15-pin ISO-12098 Painting: -First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer -A high-quality 2-component (2K) top coat in a single color in Nova gray -Rear section metallized and painted in RAL 9010 (pure white) Accessories included: -A spare wheel with holder in front of the bulkhead -2" kingpins -A galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 brake shoes with holder on the bulkhead -Galvanized folding supports under the bevel of the loading area -A bracket for a rotating beacon at the rear of the trailer Hfedpot Ag Uwjfx Alyjk -Galvanized extensions, extendable by approx. 230 mm on each side -White Reflective tape in accordance with EU regulations on the side, on the extension and at the rear, red -On the gooseneck and on the rear panel on the left and right, a holder for the warning signs including a socket -European reflector signs (red-yellow) on the rear of the trailer -TPMS tire pressure monitoring system in accordance with ECE R 141 -ALU side walls and rear wall can be plugged into the gooseneck, approx. 2,440 x 400 mm -The rear, galvanized plug-in stanchions are removable, length of the structure approx. 2,560 mm -7 pairs of WADER container bags -1x 20ft container in the loading area; 1x 40ft container in the loading area; 1x 40ft container above the gooseneck; 2x 20ft containers -7 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current loading status -Movable mounting rail for aluminum loading ramps at the rear of the vehicle -A painted layer of sand on the checker plates on the gooseneck and on the loading area to prevent slipping -Four warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light -A holder for a rotating beacon on the warning signs -Speed sticker 80 km/h at the rear and on both sides -L

Condition: new, empty load weight: 14,350 kg, maximum load weight: 53,450 kg, overall weight: 67,800 kg, axle configuration: > 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, tail-lift, Gooseneck: - Gooseneck in SNT design for optimization of loading platform length, length approx. 3,700 mm - Rear gooseneck with bevel, approx. 1,000 mm x 10° - For tractor units: 6x2, 6x4, 8x4 short Loading Platform: - Extendable loading platform, length approx. 8,800 mm, with rear bevel approx. 500 mm x 10° - A recess in the loading platform and into the bevel to accommodate the excavator bucket arm, approx. 3,850 x 750 x 210/290 mm Two-Part Steel Ramps: - One pair of two-part steel ramps, length approx. 4,350 mm, width approx. 900 mm - Ramps with rubber covering - Ramps individually hydraulically movable approx. 235 mm outwards and approx. 215 mm inwards - "Super Grip" 25 mm rubber floor and steel plate floor approx. 5 mm as additional reinforcement on the platform bevel - Square climbing strips 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles, Suspension, and Tires: - BPW axles and suspension, 1st axle steerable, all other axles hydromechanically forced-steered - Technical axle load: 12,000 kg - 1st axle with electromagnetic reversing lock, activatable via reverse gear and manually - Air suspension with lift and lower valve - Tires 235/75 R 17.5 - TPMS tire monitoring system according to ECE R141 - TPMS tire pressure sensors installed in all wheels including spare wheels Surface Treatment: - Complete steel construction blasted automatically with a shot blast machine after welding - Second shot blasting with corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) to ensure best corrosion protection - Final painting with 2 coats of 2K topcoat, single color in MB 7350 Novagrau Accessories Included: - Removable steel front wall, approx. 400 mm high - 3kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches - 1 spare wheel - Outer beam on gooseneck with mounting holes for bolted lashing rings - First hole approx. 200 mm from the front, then approx. every 400 mm - 2 pairs of screw-in lashing rings included - 1 pair of lying lashing rings at the rear of the gooseneck - 1 pair of removable ALU side walls on the gooseneck, approx. 400 mm high, anodized - 1 removable ALU rear wall on the gooseneck, approx. 400 mm high, anodized - Approx. 40 mm thick hardwood floor over the gooseneck, tread plate covering over the king pin - 2" king pin - Round NATO socket on the front connector strip Hsdpfx Ajya E A Nslysfk - 4 wheel chocks - 1 intermediate table, approx. 300 mm wide - 1 pair of lashing rings on the front crossmember - 8 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards - Extensions (galvanized) extendable by approx. 230 mm per side - Wheel recesses with square climbing strips, 15 x 15 mm in front of the axles, continuously open up to the gooseneck crossmember, approx. 700 x 410 mm - Wheel recesses with square climbing strips, 15 x 15 mm between the first and second axles, approx. 1,480 x 700 x 410 mm - ALU covers for the wheel recesses, which can also be used as bridging elements for the extension or as extension beams - 1 pair of mechanical rear supports - Radio and cable remote control - Lift axle at the front axle - Square climbing strips 20 x 30 mm, approx. every 200 mm - Central lubrication system with 1 pump - Wabco Smart Board System - 4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm

Condition: new, empty load weight: 9,300 kg, maximum load weight: 38,700 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,200 mm, suspension: air, tire size: 385/65 R 22,5, color: grey-black, Equipment: ABS, Loading platform: • Extendable loading platform with pneumatically operated locking mechanism • Loading platform with approximately 30 mm thick wooden floor • 7 pairs of lashing rings, foldable outwards (LC 5,000 daN) • 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) • Cutouts in the outer frame of the loading platform for attaching lashing straps (LC 2,000 daN) Axles and tires: • BPW axles and suspension, all axles with hydro-mechanical forced steering • With disc brakes • Technical axle load: 10,000 kg • Air suspension with lifting and lowering valve • Axle tool • Tires: 385/65 R 22.5 • TPMS tire pressure monitoring system according to ECE R 141 Braking system: • WABCO braking system according to EU regulations with EBS-E (2S2M) Electrical system: • Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) • ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets • Connection according to ISO • 24N ISO-1185 • 24S ISO-3731 • 15-pin ISO-12098 Included accessories: • Trailing function at the front and rear, operable via cable remote control with push buttons, with single-axle steering control • 4 wheel chocks with holder on the front panel • 2" kingpin • One galvanized steel front panel, approx. 1,600 mm high • Yellow-red air couplings on the galvanized connection bar at the front • White reflector tape according to EU regulations on the sides, on the extension, and at the rear of the trailer in red • European reflector plates (red-yellow) at the rear of the trailer • One mudflap at the rear of the trailer • Manual and description • One bracket for a rotating beacon at the rear of the trailer • Loading platform with approximately 30 mm thick wooden floor, framed in omega profiles • 10 pairs of socket pockets for 100 x 50 mm lashing bars in the outer frame of the loading platform • 1 spare wheel holder under the loading platform on the right side in the direction of travel • Electro-hydraulic unit • One bracket for warning signs on the gooseneck and the rear panel, left and right, including socket • A painted sand layer on the center beam as a non-slip coating • 6 pairs of WADER container pockets in the loading platform, for 1x20ft, 2x 20ft or 1x 40ft container, an additional locking point is provided on the extension for a 45ft container • 4 pairs of socket pocket strips, mounted transversely in the loading platform, for 100 x 50 mm lashing bars • Access ladder mounted on the right side in the direction of travel • One tool box, HDPE, approx. 1,200 x 500 x 480 mm, at the front under the loading platform on the left side in the direction of travel Hodpfjiu Etrsx Alyjfk • Central lubrication system BEKAMAX (Pico) with removable protection around the pump • Lift axle on the front axle, controlled by TEBS E depending on the current axle load and the current load condition • Wireless remote control for the trailing function in addition to the cable remote control, with indicator lights on the receiver as single-axle steering control • Four warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light • A bracket for a rotating beacon on the warning signs • Speed stickers 80 km/h at the rear and on both sides • Load manometer to determine the axle loads, including load diagram • HRM metallization (High Resistance Metallization) of the outer frame • Complete steel construction blasted with shot, then the defined visible surfaces are hot-dip coated with metallization with ZINACOR 8

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm, with a rear slope of approx. 850 mm x 10° -Hydraulically extendable and retractable, stroke +- 250 mm incl. hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For semi-trailer tractors: 6 x 4 and 8 x 4 Loading platform: -Loading platform in extendable design, length approx. 11,000 mm with a slope at the rear of approx. 500 mm x 10°. -A recess in the loading platform and into the slope to accommodate the excavator arm, approx. 4,240 x 900 x 440 mm -Pneumatic locking with tapered locking pin and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adapt to the respective loading platform length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically folding ramp tips. Hfjdpek Af Svsfx Alyjk -Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 215 mm -Rubber flooring "Super Grip" 25 mm and sheet metal flooring approx. 5 mm as additional reinforcement on the slope of the loading platform -Square climbing strips 20x30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steering -The steering behavior of the two front axles can be optimally adjusted both mechanically and hydraulically to the loading platform length. -Hose rupture valve on the axle compensation cylinders with automatic RESET function. -Hydraulic cylinders with shut-off valves and quick-release couplings to secure in the raised position. -245/70 R 17.5 3PMSF Included accessories: -Steel headboard, pluggable, approx. 400 mm high -Connection strip for supply lines to the semi-trailer tractor, mounted at the height of the outer frame profile -1 spare wheel -Outer carrier of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screw-in lashing rings included -Diamond plate flooring above the gooseneck -On the gooseneck, 1 pair of pluggable aluminum sideboards, approx. 400 mm high, anodized -On the gooseneck, a pluggable aluminum rear panel, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate of the gooseneck for the turntable, approx. 500 mm wide -4 wheel chocks -4 axle load manometers -Mechanical outrigger supports at the front -1 INOX toolbox, one-piece, approx. 2,480 x 340 x 390 mm -Mechanical outrigger supports at the front -Continuous sheet metal flooring on the loading platform with a sand coating as an anti-slip measure -1 intermediate table, approx. 500 mm wide, for the extension, with elongated holes for attaching and adjustable bridging elements -Sand coating on the support surfaces of the intermediate table -Mechanical locking to lock the intermediate table to the extension -8 pairs of pocket rails in the outer frame -Extensions (galvanized), extendable by approx. 230 mm on each side -1 pair of hydraulic rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electric-hydraulic unit -Extension planks, loose, in reinforced steel U-profile -Wireless and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: new, maximum load weight: 38,800 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5 3PMSF, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with beveled corners at the front 45° and with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area in extendable version: -Loading surface in extendable version with rear slope of approx. 1,000 mm x 8° -6 pairs of lashing rings can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings can be folded outwards (LC 10,000 daN) -1 pair of lashing rings lying in the front of the cargo bed (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN) -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Axles and tires: -PW axles and suspension, 2 axles rigid, 1 axle self-steering -Technical axle load: 12,000 kg -Electro-magnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -axle tool -235/75 R 17.5 3PMSF Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Seat posts: -JOST seat posts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Accessories included: -One spare wheel with holder in front of the bulkhead -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with holder on the bulkhead -One bracket for rotating beacon at the rear of the trailer -Mounting in the rear area of the gooseneck for ALU trailer lights -Galvanized folding supports under the bevel of the cargo bed -Cover plates to bridge the space between the ramps and the cargo bed -White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear -Electric hydraulic unit at the rear, under the cargo bed -On the gooseneck and on the ramps on the left and right a holder for the warning signs including socket -Control valves for the ramps mounted on the right-hand side of the trailer -One mud flap at the rear of the trailer -Manual and description on USB stick -ALU drop sides and rear wall approx. 2,440 x 400 mm on the gooseneck -The rear, galvanized stanchions are removable (length of the body approx. 2,560 mm) -Four warning signs approx. 423 x 423 mm with one position light, extendable by approx. 400 mm -3 pairs of WADER container pockets in the loading area for a 20ft, 30ft or 40ft container -6 pairs of stanchion pockets 100x50 mm in the outer frame of the cargo bed -Galvanized extensions, extendable by approx. 230 mm per side Hfjdpjuqlmnsfx Alysk -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope -A layer of sand painted onto the chequer plates, above the kingpin and the cargo bed to prevent slipping -On the warning plates a holder for rotating beacon -European reflector plates (red/yellow) at the rear of the trailer -Speed stickers 80 km/h at the rear and on both sides -Load manometer to determine the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, empty load weight: 7,900 kg, maximum load weight: 41,600 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, operation weight: 7,900 kg, Equipment: ABS, Gooseneck: -Gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area: -Loading surface with rear slope of approx. 1,000 mm x 8° -Recess in the chamfer and protruding into the loading surface to accommodate the excavator dipper stick approx. 2,900 x 750 x 210/290 mm Cut-outs in the outer frame of the cargo bed for attaching tensioning straps -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Seat posts: -JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles and suspension, 2 axles rigid, 1 axle self-steering -Technical axle load: 12,000 kg -Electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -TPMS tire pressure monitoring system in accordance with ECE R 141 -235/75 R 17.5 tires Paint finish: -Complete steel construction automatically blasted after welding with blast wheel system -second blasting with corundum for optimum adhesion of the coating system -Finishing coat with 2 layers of 2K top coat, single color in RAL MB 7350 nova grey Hedpfounrapox Alyjfk -Rims painted in silver -Rear section metallized and painted in RAL 9010 (pure white) -Sealing of cavities with special wax Electrical system: -Electrical system in accordance with EU regulations, lighting 24 volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX at the front connection strip with sockets 2x 7-pin & 1x15-pin Accessories included: -Extensive lashing positions -2" kingpin -One galvanized steel end wall approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 restraining shoes with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking ramps -Galvanized folding supports under the bevel of the cargo bed -One bracket for a rotating beacon at the rear of the trailer -Galvanized extensions, extendable by approx. 230 mm per side -White reflector tape in accordance with EU regulations on the sides and red at the rear -On the gooseneck and on the rear plate on the left and right, one bracket each for the warning signs including socket -ALU drop sides and rear panel can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear, galvanized stanchions are removable -2 pairs of WADER container pockets in the loading area for a 20ft container -6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Sliding attachment strip for ALU docking ramps at the rear of the vehicle -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope -a layer of sand painted onto the chequer plates on the gooseneck and on the cargo bed to prevent slipping -Four warning signs that can be extended by approx. 400 mm, approx. 423 x 423 mm with a position light -One bracket for rotating beacon on the warning signs -Speed sticker 80 km/h at the rear and on both sides -European reflector plates (red/yellow) at the rear of the trailer -Manual and description on USB stick -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, empty load weight: 12,800 kg, maximum load weight: 36,200 kg, overall weight: 49,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,550 mm, loading space height: 375 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 12,800 kg, Equipment: ABS, Gooseneck: - Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm - Gooseneck hydraulically raised/lowered and removable - Technical fifth wheel load: 25,000 kg - For tractor units: 4 x 2, 6 x 2, and 6 x 4 Loading area: - Low bed with external supports, designed as a telescopic tank bridge in a low construction with a front extension - Length 6,850 mm x Width 2,540 mm - One locking point approximately every 1,000 mm on the extension Rear chassis: - Rear chassis with closed outer frame with checker plate cover and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear Axles, suspension, and tires: - "PENDEL-AXLE", all Hydro-mechanically forced-steered axles - Hose rupture valve on the axle balancing cylinder with automatic reset function - Hydraulic cylinder with shut-off valves and pins for securing in the raised position - Final axle painting with two coats of 2-component acrylic paint in a single color "FAY-Gray-34-0260" - Technical axle load: 12,000 kg - Hydraulic axle balancing - Tires: 245/70 R 17.5 - TPMS tire pressure monitoring system in accordance with ECE R 14 - TPMS tire pressure monitoring sensors installed in all wheels, including spare tires Accessories included: - Steel bulkhead, plug-in, approx. 400 mm high - 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches - One spare tire with mounting adapter - Gooseneck outer support with mounting holes for screwable lashing rings -Slidable aluminum side walls on the gooseneck, approx. 400 mm high, anodized -Slidable aluminum rear wall on the gooseneck, approx. 400 mm high, anodized Hfsdpsvy Edcsfx Alyjk -Checker plate covering above the gooseneck -Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide -Illuminated control panel on the gooseneck with on/off switch -Hydraulic crossbar for supporting the gooseneck on the tractor unit or a dolly -2" kingpin -Anti-slip sticker on the left slope of the gooseneck -Gooseneck closed at the rear upper area with a removable cover -4 chocks with brackets -Hydraulic connections from the gooseneck to the drop bed with multi-coupling instead of screw couplings -1 pair of steel ramps with climbing rails and fastening bolts for bridging the drop bed's hooks -The Ramps can be installed over or between the hooks. -Attachment option for the steel loading ramps at the rear between the outer supports of the gooseneck. -Prepared for screw-on container holders for 1x20f on the outer support. -Mechanical bolt-and-lug coupling from the low bed to the chassis, for replacing the loading area or installing extension supports. -With electro-pneumatic-hydraulic couplings. -The outer supports of the low bed are provided with a painted layer of sand as a slip protection. -Removable loading floor (galvanized) in 3 elements, insertable between the outer supports with hardwood flooring. -Foldable extensions, by approximately 230 mm per side. -Hanging rail at the front of the rear chassis to the low bed for loose loading ramps. -2 pairs of stake pockets recessed into the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm. -Hanging rail for loose Aluminum docking ramps on the vehicle's end crossbar -Central lubrication system with 2 pumps -Wireless and cable remote control -4 warning signs, approximately 423 mm x 423 mm extendable -Extensive lashing positions

Condition: new, empty load weight: 15,900 kg, maximum load weight: 63,500 kg, overall weight: 68,000 kg, axle configuration: > 3 axles, loading space length: 12,700 mm, loading space width: 2,740 mm, loading space height: 860 mm, suspension: air, tire size: 235/75/r17,5, color: grey, operation weight: 52,100 kg, Equipment: ABS, Gooseneck: Hfedjmfqi Iepfx Alyjk Gooseneck in SNT design to optimize the loading area length, length approx. 3,300 mm, rear with bevel approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For SZM: 6x2, 6x4 and 8x4 Cargo bed: Loading area in extendable design, length approx. 9,400 mm with bevel at the rear approx. 500 mm x 10° A recess in the loading area and protruding into the chamfer to accommodate the excavator dipper stick approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adjust to the respective loading area length Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool 235/75 R 17.5 3PMSF dual tires Load index 143/141J (144/144F) Two-piece steel ramps: A pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm Hardwood decking Hydraulically hinged ramp tips Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards Brake system: WABCO EBS-E brake system in accordance with EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 to ensure the best corrosion protection Surface treatment: Complete steel structure automatically blasted after welding with wheel blast cleaning Second blasting with corundum for optimum adhesion of the coating system Final coating with 2 layers of 2-component paint in a single color in nova grey, followed by sealing of the cavities with special wax Rims in silver gray Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Accessories: Steel end wall, pluggable, approx. 400 mm high Connection strip for supply lines to the SZM Spiral cable for supplying the electro-hydraulic unit and/or the electric cable winch between the trailer and SZM with plug Electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches Outer beam of the gooseneck with fastening holes for screwable lashing rings The first hole approx. 200 mm from the front, then approx. every 400 mm One fastening hole in the rear upper area of the gooseneck outer beam for a screwable lashing ring Approx. 40 mm thick hardwood covering over the gooseneck, checker plate covering over the kingpin Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide Continuous, approx. 50 mm thick hardwood planking on the loading area, interrupted between the axles Locking of the cargo bed with conically welded locking profiles every 250 mm, including pretensioning plate Slotted holes for attachable and movable bridging elements: on the fixed part behind the gooseneck on the front of the cargo bed 1 movable intermediate table, for the large cross-section extension tube Control valves for the hydraulic ramps on the right-hand side of the vehicle Central lubrication system with 1 pump, with standard grease according to NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control, with 2 indicator lights on the receiver as single-track control

Condition: new, empty load weight: 10,600 kg, maximum load weight: 35,400 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, loading space height: 940 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Loading area: -Loading area in extendable design -Loading area with hardwood planks with rear bevel of approx. 500 mm x 8° -2 pairs of lashing rings (LC 5,000 daN) -1 pair of lashing rings (LC 10,000 daN) -6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) -Cutouts in the outer frame of the loading area for attaching tensioning straps Braking system: -Braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: -First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer -A high-quality 2-component (2K) top coat in a single color in Nova gray -Rear section metallized and in Painted RAL 9010 (pure white) -No metallic paint possible Seatposts: -JOST seatposts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: -Steel construction made of high-strength fine-grain steel -Steel grades: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Electrical system: -Electrical system in accordance with EU regulations, LED lighting 24 volts -2x 7-pin & 15-pin sockets Axles and tires: -BPW axles, air-sprung, with disc brakes (377 mm), with lifting/lowering function -Hydro-mechanical forced steering -Axle tool -Twin tires 235/75 R 17.5 Accessories included: -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with bracket -2" king pins -A galvanized steel front wall approx. 1600 mm high -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -Loading area with strong hardwood floor -Steering from the front and rear using a cable -Remote control operated via push buttons, with alignment control of the axles -With radio remote control for the steering -9 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area. -Galvanized folding supports under the slope of the loading area -Movable mounting rail for aluminum docking ramps at the rear of the vehicle -European reflector signs (red-yellow) at the rear of the trailer -A mud flap at the rear of the trailer -A bracket for a rotating beacon at the rear of the trailer -A bracket for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -A tool box INOX 1,500x390x810 under the loading area on the right in the direction of travel -Central lubrication system BEKAMAX (Pico) with normal grease NLHI-2 and removable protection around the pump -6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2 x 20ft container or 1 x 40ft container, an additional locking point is provided in the pull-out for a 45ft container -4 pairs Stake pocket strips, mounted transversely in the loading area, for 100 x 50 mm stakes Hedpol Ux Rwefx Alysfk -Lift axle on the front axle with control by TEBS -A dependency on the current axle load and the current loading status -Speed sticker 80 km/h at the rear and on both sides -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with an LED position light -A holder for a rotating beacon on the warning signs -Load pressure gauge for determining the axle loads including load diagram -HRM metallization (high resistance metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZIN

Condition: new, empty load weight: 9,500 kg, maximum load weight: 35,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, suspension: air, tire size: 435/50 R 19.5, color: grey, operation weight: 9,500 kg, Equipment: ABS, Extendable platform: Platform with hardwood planks with a rear slope of approx. 1,000 mm x 8° 1 pair of permanently installed wheel recesses, approx. 1,610 x 970 x 400 mm 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN) Cutouts in the outer frame of the platform for attaching tension straps (LC 2,000 daN) Braking system: Braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer High-quality 2-component (2K) topcoat, single-color in Novagrau Rear section metallized and painted in RAL 9010 (pure white) Metallic paint is not possible Fifth wheel: JOST fifth wheel (mechanical) with 2-speed gearbox for 24t lifting capacity (50t test load) Steel construction: Steel construction made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt Sockets 24N, 24S & 15-pole Axles and tires: BPW axles, air-sprung, with disc brakes (377 mm), with raising/lowering function The trailing lift axles with electro-magnetic reverse lock can be activated via reverse gear or manually Axle tool Tires 435/50 R 19.5 Included accessories: Yellow-red air couplings on the galvanized connecting strip at the front 4 pieces of chocks with holder 2" kingpin A galvanized steel front bulkhead approx. 1600 mm high. EN12642-XL White reflector tape according to EU regulations on the side, on the extension and red at the rear Platform with strong hardwood floor 9 pairs of socket pockets for plug-in profiles 100 x 50 mm in the outer frame of the platform 1 spare wheel holder under the platform on the right in the direction of travel Galvanized folding supports under the slope of the platform Hodpjk Eammefx Alyofk Adjustable mounting rails for ALU loading ramps at the rear of the vehicle European reflector signs (red-yellow) at the rear of the semi-trailer One mudflap at the rear of the semi-trailer One bracket for a rotating beacon at the rear of the semi-trailer On the gooseneck and on the rear plate, left and right, one bracket each for the warning signs including socket One tool box HDPE 620x360x610 under the platform on the left in the direction of travel 4 pairs of WADER container pockets in the platform, for 1x 20ft container or 1 x 40ft container, an additional locking point is provided in the extension for a 45ft container 3 pairs of socket pocket strips, mounted transversely in the platform, for plug-in profiles 100 x 50 mm Lift axle on the front axle with control via TEBS E depending on the current axle load and the current loading condition Speed stickers 80 km/h at the rear and on both sides Four warning signs approx. 423 x 423 mm that can be extended by approx. 400 mm with an LED position light. The warning signs have a bracket for a rotating beacon Load manometer for determining the axle loads including load diagram HRM metallization (High Resistance Metallization) of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces are metallized

Condition: new, empty load weight: 11,300 kg, maximum load weight: 36,700 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,250 mm, suspension: air, tire size: 385/65 r 22,5, color: grey-black, Equipment: ABS, Loading platform: Loading platform with extendable design and pneumatically actuated locking mechanism. A fixed intermediate table, approximately 250 mm wide, is located on the center beam. 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles and tires: BPW axles and suspension, all axles hydro-mechanically steered. Disc brakes, technical axle load: 10,000 kg Air suspension with lifting and lowering valve Axle tool 6-fold tire configuration 385/65 R 22.5 Braking system: Braking system according to EU regulations with EBS-E (2S2M) Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for 24-ton lifting capacity (50-ton test load) Steel structure: Steel structure made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection bar at the front with 24N, 24S & 15-pole sockets Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, solid color in Novagrau. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint not possible. Included accessories: One bracket for warning signs including socket on the swan neck and on the rear panel on the left and right sides. Trailing axle control from the front and rear by means of a cable remote control via push buttons, with single-axle control. Electro-hydraulic unit 4 pieces of chocks with holder on the front panel 2" kingpin A galvanized steel front panel approximately 2,200 mm high Yellow-red air couplings on the galvanized connection bar at the front White reflector tape according to EU regulations on the side, on the extension, and at the rear, in red. European reflector plates (red-yellow) at the rear of the trailer One mudflap at the rear of the trailer Manual and description One bracket for a rotating beacon at the rear of the trailer Loading platform with approximately 30 mm thick wooden floor framed in omega profiles 10 pairs of pocket rails for plug-in rails 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform on the right side in the direction of travel 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container, an additional locking point is provided on the extension for a 45ft container. 5 pairs of pocket rail strips, mounted transversely in the loading platform, for plug-in rails 100 x 50 mm One galvanized bracket transversely under the loading platform (2,390 x 720 x 400 mm) Access ladder mounted on the right side in the direction of travel One tool box HDPE 1,200x500x480 at the front under the loading platform on the left side in the direction of travel Lift axle on the front axle with control via TEBS E depending on the current axle load and the current load condition Central lubrication system with 2 pumps BEKAMAX (Pico) with normal grease NLGI-2 and with a removable protective cover around the pump Reflector tape red/white in the extension of the loading platform Hfodpfxehlz Shs Alyek A painte

Condition: new, empty load weight: 6,350 kg, maximum load weight: 38,650 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Loading platform: - 2 pairs of lashing rings that can be folded outwards (LC 5,000 daN) - 24 pairs of cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Fifth wheel: - JOST fifth wheel (mechanical) with a 2-speed gearbox for a 24-tonne lifting capacity (50-tonne test load) Axles and tires: - BPW axles, air-sprung, with disc brakes (430 mm), with raising/lowering function - Tires: 385/65 R 22.5 Braking system: - WABCO braking system in accordance with EU regulations, with EBS-E (2S2M) Paintwork: - First-class and durable corrosion protection of the standard bead-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) topcoat, single color in MB 7350 Novagrau - Rear part metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible Steel structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations - Lighting: 24 volts - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets - Connection according to ISO. - 24N ISO-1185 - 24S ISO-3731 - 15-pin ISO-12098 Included accessories: - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with bracket - 2" king pin - Galvanized steel front panel, approximately 1,600 mm high. EN12642-XL - White reflector tape in accordance with EU regulations on the sides of the trailer and red on the rear - European reflector signs (red-yellow) at the rear of the trailer - Loading platform with approximately 30 mm thick hardwood floor, edged with omega profiles - 10 pairs of socket pockets for 100 x 50 mm securing bars in the outer frame of the loading platform - 3 pairs of socket pocket strips, mounted transversely in the loading platform, for 100 x 50 mm securing bars - Storage for 1,000 mm securing bars, at the rear in the central beam - 1 spare wheel holder under the loading platform on the right side in the direction of travel - One mud flap at the rear of the trailer - Manual and description on a USB stick - One bracket for a rotating beacon at the rear of the trailer - One bracket for warning signs including socket on the gooseneck and on the rear panel, left and right - 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container. Flush with the rear - Speed stickers 80 km/h on the rear and on both sides - Four warning signs, each extendable by approximately 400 mm, approximately 423 x 423 mm, with an LED position light Hfjdpfx Aleiu Etkjyok - Load gauge for determining axle loads, including a load diagram - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure bead-blasted, followed by the defined visible surfaces hot-coated with metallization using ZINACOR 850 (Zinc 85% - Aluminum 15%)

Condition: new, empty load weight: 8,300 kg, maximum load weight: 36,700 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,080 mm, suspension: air, tire size: 385/65 R 22.5, color: grey, Equipment: ABS, tail-lift, Loading platform: Loading platform in extendable design with pneumatically actuated locking mechanism Cutouts in the outer frame of the loading platform for attaching lashing straps Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for 24-ton lifting capacity Axles and tires: BPW axles, air-suspended, with disc brakes (430 mm), with raising/lowering function The trailing lift axle can be activated with an electro-magnetic reverse lock via reverse gear or manually Axle tool Tires 385/65 R 22.5 Braking system: WABCO braking system according to EU regulations with EBS-E Paintwork: First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer High-quality 2-component topcoat, solid color in MB 7350 Novagrau Rear section metallized and painted in RAL 9010 Metallic paint not possible Steel structure: Steel structure made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical system: Electrical system according to EU regulations Lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX on the connection bar at the front with sockets 24N, 24S & 15-pin Connection according to ISO Accessories included: Yellow-red air couplings on the galvanized connection bar at the front Hjdeikyh Hspfx Alyofk A galvanized steel front panel, approx. 1,600 mm high, EN12642-XL 4 wheel chocks with holder White reflector tape according to EU regulations on the side, on the extension, and in red at the rear European reflector plates on the rear of the semi-trailer Loading platform with approx. 30 mm thick hardwood floor edged in omega profiles 10 pairs of stake pockets for stake pockets 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform on the right in the direction of travel Manual and description A bracket for a rotating beacon on the rear of the semi-trailer On the gooseneck and on the rear panel, one bracket each on the left and right for the warning signs, including a socket A painted sand layer on the central beam as a non-slip coating 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container; an additional locking point is provided in the extension for a 45ft container 4 pairs of stake pocket strips, mounted across in the loading platform, for stake pockets 100 x 50 mm A galvanized bracket mounted across under the loading platform 2,390 x 720 x 400 mm Access ladder mounted on the right in the direction of travel Lift axle on the front axle with control via TEBS E depending on the current axle load and the current load condition Load gauge for determining the axle loads including a load diagram HRM metallization of the outer frame. Complete steel structure shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 in metallization.

Condition: new, empty load weight: 10,000 kg, maximum load weight: 41,600 kg, overall weight: 51,600 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Load area: - Gooseneck, length approx. 4,100 mm with central beam - Extendable load area, length approx. 9,500 mm with a slope at the rear of approx. 350 mm x 10° and integrated mounting rail for attaching loose aluminum approach ramps - Pneumatic locking with tapered locking bolts and reinforced locking positions - The supply lines are protected in the extendable beams and automatically adjust to the respective load area length Axles, suspension, and tires: - BPW axles and suspension, all axles hydro-mechanically forced steering - Mounted on a turntable - Technical axle load: 12,000 kg - Air suspension with lifting and lowering valve - Tires 235/75 R17.5, dual tires Painting: - 6-layer finish - Complete steel construction blasted after welding - One layer of zinc-based primer, one layer of adhesion primer - Final coat with 2 layers of 2-component paint (acrylic), solid color in MB 7350 Novagrau, followed by sealing of cavities with special wax Steel structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) - Welders certified according to DIN-EN 287-1 - Welding process MAG according to EN ISO 4063, shielding gas M21 according to EN ISO 14175 Accessories: - Front panel made of steel, approx. 1,600 mm high - Round NATO socket on the connection strip at the front - 3 kW electric-hydraulic unit for controlling the hydraulic operations - 4 pairs of recessed lashing rings in the outer frame of the gooseneck - 4 pairs of stake pockets recessed in the outer frame of the gooseneck, for stakes approx. 100x50 mm - 1 stake pocket strip mounted transversely in the load bed of the gooseneck, for stakes approx. 100x50 mm (1x at the rear of the gooseneck) - 2” kingpin - Mechanical landing gear with 2-speed gearbox and crank - JOST Module B – static test load = 50,000 kg - On the gooseneck and load area, approx. 32 mm wooden floor edged with aluminum omega profiles - A locking point on the extension, approx. every 500 mm - 10 pairs of recessed lashing rings lying in the outer frame of the load area, can be folded outwards - 6 pairs of stake pockets recessed in the outer frame of the load area, for stakes approx. 100x50 mm - 2 stake pocket strips mounted transversely in the load bed of the load area, for stakes approx. 100x50 mm - Tool box INOX approx. 1,250 x 500 x 550 mm - Slope on the end crossbar of the vehicle, approx. 350 mm 10° - Integrated mounting rail for loose aluminum approach ramps on the end crossbar of the vehicle - 1 pair of outrigger supports at the end crossbar - Fenders on all axles - Central lubrication system with 1 pump - Steering from the front and rear via cable remote control, operable via push buttons, with single-axle control - Under the gooseneck and at the rear on the end crossbar, one 7-pole socket each for warning signs - One 7-pole socket on the end crossbar - Container locks “TWIST-LOCKS” in the load area for the transport of 2x 20ft and 1x 40ft containers - Radio remote control for the steering, in addition to the cable remote control, with 2 indicator lights on the receiver for single-axle control - 2 axle load gauges + axle load diagram - 4 warning signs approx. 423 x 423 mm, extendable by approx. 400 mm - Standard HRM metallization (High Resistance Metallization) of the outer frame Hfjdeiuy Nlepfx Alyek - Complete steel construction blasted, then the defined visible surfaces hot-dip galvanized with ZINACOR 850 (zinc 85% - alu

Condition: new, maximum load weight: 36,020 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 435/50 R 19.5, color: grey, Equipment: ABS, Loading platform: Loading area in extendable design with pneumatically confirmed locking mechanism 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of lashing rings can be folded outwards (LC 5,000 daN) 2 pairs of lashing rings can be folded outwards (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps Brake system: Brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in one color Rear section metallized and painted in RAL 9010 (pure white) Metallic paint is not possible Seat posts: JOST seat posts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDICK (ASS3) ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Axles and tires: BPW axles, air-sprung, with disc brakes (377 mm), with lifting/lowering function The self-steering axles with electromagnetic reverse lock can be activated via reverse gear or manually Axle tool. Tires 435/50 R 19.5 Accessories included: Yellow-red air couplings on the galvanized connection strip at the front 2 wheel chocks with bracket 2" kingpin One galvanized steel bulkhead approx. 1,600 mm high. EN12642-XL. Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer European reflector plates (red/yellow) at the rear of the trailer Loading area with approx. 38 mm thick hardwood floor 10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed 1 spare wheel holder under the cargo bed on the right in the direction of travel Manual and description on USB stick One mud flap at the rear of the trailer A bracket for a rotating beacon at the rear of the trailer A holder for the warning signs on the gooseneck and on the rear panel on the left and right, including a socket One INOX toolbox transversely under the loading area (1,000 x 400 x 2,500 mm) Hfodpfx Alei Dwlwsysk 6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2 x 20ft containers or 1 x 40ft container, an additional locking point is provided in the pull-out for a 45ft container 3 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions Rear speed sticker 60 km/h. 2 reversing lights mounted on the rear panel Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm with a position light A bracket for rotating beacon on the warning signs HRM metallization (High Resistance Metallization) of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces are hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: new, maximum load weight: 36,410 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available vehicles on our website. Extract from the equipment. Full equipment details available on request. GOOSENECK: * Gooseneck in SNT design for optimized loading platform length, length approx. 3,700 mm, rear with taper approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Steel front wall, removable, approx. 400 mm high * ASPÖCK-UNIBOX * 3 kW electro-hydraulic power unit for hydraulic functions, excluding hydraulic winches * Approx. 40 mm thick hardwood decking above the gooseneck * 2-inch kingpin * Gooseneck guide plate for the fifth-wheel plate, approx. 500 mm wide * Bracket at the rear of the gooseneck for ALU loading ramps * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) * 4 wheel chocks with holders in front of the front wall * 1 pair of stake pockets recessed on the gooseneck for plug-in stakes approx. 100 x 50 mm (located on the inside of the chassis rail) EQUIPMENT: * Loading platform length approx. 8,800 mm, extendable version approx. 4,100 mm, with rear taper approx. 500 mm x 10° Hodpfxey Auh Is Alyjfk * A recess in the loading platform, extending into the tapered section to accommodate the excavator dipper stick, approx. 2,490 x 750 x 210/290 mm (L x W x H) * Pneumatic locking with conical locking bolts and reinforced locking positions, supply lines are protected inside the extendable beams and automatically adapt to the selected loading platform length * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st and 2nd axles rigid, 3rd axle steered * 3rd axle with electro-magnetic reverse lock, activated via reverse gear and manually * Technical axle load: each 12,000 kg with air suspension and raise/lower valve * 235/75 R 17.5 3PMSF twin tires. Manufacturer at our discretion * Mechanical landing legs with 2-speed gearbox and crank. JOST Module B – static test load = approx. 50,000 kg * Throughout the loading platform and between the axles, interrupted approx. 50 mm thick hardwood decking (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the telescopic tube with large cross-section. Intermediate table with offset loading platform and extendable mounting rails for aluminum bridging elements * Platform locking with conically welded locking profiles every approx. 250 mm. Includes pre-tensioning plate * 1 pair of lashing rings on the front cross member (LC 10,000 daN) * 9 pairs of recessed lashing rings in the outer frame of the loading area, foldable outwards (LC 10,000 daN) * 1 pair of fixed wheel recesses in front of the axles, open up to the gooseneck cross member, approx. 700 x 410 mm (W x D) * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom (in case vehicle is equipped with extendable widenings) * 1 pair of fixed wheel recesses, approx. 1,480 x 700 x 410 mm (L x W x D), in the platform between 1st and 2nd axle * Wheel recesses with 15 x 15 mm square climbing strips and widenings at the bottom * Aluminum covers for the wheel recesses in front of the axles and between the 1st and 2nd axle, which can also be used as widening planks (if vehicle is equipped with extendable widenings) * Lockable aluminum elements installed on the extension tubes of the widenings * 1 pair of mechanical rear supports * 1st axle with traction aid * Sandblasting painted...

Condition: new, maximum load weight: 36,020 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our full vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Complete equipment details available on request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Loading area: * Loading area with rear bevel approx. 1,000 mm x 8° * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate above the axles Two-piece steel ramps: * One pair of galvanized two-piece steel ramps, approx. 3,185 + 1,420 x 1,250 mm, with grating covering C40/5 (point load approx. 2.8 t on a surface of approx. 20 x 20 cm) * Ramp with hydraulically foldable ramp sections and hydraulic lifting system * Maximum load per pair: 30,000 kg Hfjdpfxoy Auhuo Alyjk Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension, 2 rigid axles, 1 steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock activated via reverse gear and manually * Air suspension with raise/lower valve Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion TPMS: * TPMS tyre pressure monitoring system according to ECE R 141 Brake system: * WABCO brake system compliant with EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations, LED lighting 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to guarantee optimum corrosion protection * Finishing coat: 2 layers 2K topcoat, solid colour RAL 3002 carmine red as per RAL system 841GL * Rear section metallised and painted RAL 9010 (pure white) * Rims in silver Included accessories: * One bracket for warning signs on the gooseneck and at the rear left and right, including socket * 1 spare wheel holder under the loading area, right in the direction of travel * 2" kingpin * One galvanized steel front wall * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with brackets on the bulkhead * 3 height wooden boards * Galvanized folding supports under the loading area bevel * Bracket for rotating beacon at rear of trailer * Height-adjustable tarpaulin structure – approx. 3,960 mm * Galvanized front wall with tensioning system for sliding curtains, height adjustable by approx. 400 mm * EDSCHA roof, sliding forward on aluminum roof girder profiles (screwed to front and rear wall) * 3 pairs of sliding stakes in the loading area * The body is hydraulically extendable to the left and right at the rear by approx. 750 mm * Sliding roof with pivoting portal crossbeam * Sliding curtain with approx. 700 mm reserve length, ratchet straps at approx. 600 mm intervals. Height O

Condition: used, machine/vehicle number: YAFTL413000014309, axle configuration: > 3 axles, first registration: 01/2013, total length: 18,600 mm, total width: 2,750 mm, total height: 3,250 mm, suspension: hydraulics, tire size: 285/70 R19.5, color: other, Year of construction: 2013, = Additional options and accessories = - Drum brakes Hfedpfjxtp Rvsx Alyok - Steering Axle = Remarks = Chassis Diameter coupling pin / coupling plate: 2 inch Drum brake: ✓ Structure Construction year: 2013 Special Transport Detachable swan neck: ✓ Length above axes: 540 cm Length of loading floor: 665 cm Lowloader: ✓ Max width: 3 cm (275 cm ) Expandable: ✓ NON-EU VEHICLE, REQUIRES CUSTOMS CLEARANCE // 4-axle lowloader with forced steering, Max weight 88.000 kg, Removable neck, Load bed lenght 665 cm, Load bed width 275 cm, Max load bed widht 3 cm (275 cm), Load bed height 65 cm, Axle plateau lenght 540 cm, Axle plateau height 105 cm, Saf axles, Hydraulic suspension, ABS, Forced steering, 4 steering axles, Drum brakes, Tires 285/70R19.5, Shipment dimensions 1860x275x3 cm = More information = Tyre size: 285/70 R19.5 Make axles: Saf Brakes: drum brakes Suspension: hydraulic suspension Front axle: Double wheels; Steering; Tyre profile left outer: 50%; Tyre profile right outer: 65% Middle axle 1: Double wheels; Steering; Tyre profile left inner: 15%; Tyre profile right outer: 15% Middle axle 2: Double wheels; Steering; Tyre profile left outer: 20%; Tyre profile right outer: % Rear axle: Double wheels; Steering; Tyre profile left inner: 45%; Tyre profile right outer: % Make of bodywork: Faymonville STBZ-4VA = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, machine/vehicle number: YAFTL410000011078, axle configuration: > 3 axles, first registration: 01/2010, total length: 18,200 mm, total width: 2,750 mm, total height: 2,550 mm, suspension: air, color: other, Year of construction: 2010, Special Transport Length above axes: 560 cm Length of loading floor: 750 cm Length of swan neck: 500 cm Lowloader: ✓ Max width: 313 cm Expandable: ✓ Extendable: ✓ = More information = Make axles: Saf Brakes: drum brakes Suspension: air suspension Front axle: Double wheels; Steering; Tyre profile left outer: 80%; Tyre profile right outer: 75% Middle axle 1: Double wheels; Steering; Tyre profile left outer: 80%; Tyre profile right outer: 75% Middle axle 2: Double wheels; Steering; Tyre profile left outer: 90%; Tyre profile right outer: 90% Rear axle: Double wheels; Steering; Tyre profile left outer: 90%; Tyre profile right outer: 90% GVW: 80.000 kg Registration number: Y0101796 = Dealer information = Hfodowid Dlopfx Alyek For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, machine/vehicle number: YAMT14XX5K0104637, axle configuration: > 3 axles, first registration: 01/2020, total length: 14,100 mm, total width: 2,550 mm, total height: 3,350 mm, suspension: air, tire size: 235/75 R17.5, color: other, Year of construction: 2020, Chassis Chassis height: 90 cm Diameter coupling pin / coupling plate: 2 inch Structure Dish height: 120 cm Special Transport 2-piece driving plates: ✓ Hydraulic ramps: ✓ Length above axes: 90 cm Length of loading floor: 930 cm Length of ramps: 405 cm Length of swan neck: 430 cm Max width: 305 cm (20 cm + 20 cm) Max. length: 930 cm Expandable: ✓ Tank Fuel: ✓ 3-axle semi lowbed trailer with hydraulic ramps, ABS, Air suspension, 1st axle lifting axle, 3rd and 4th axles passive steering axles, Drum brakes, Saf axles, Tyres 235/75R17.5, Double tyres, Kingpin diameter 2 inch // DIMENSIONS // 60800 kg max weight, Load bed lenght 930 cm, Load bed width 255 cm, Max load bed width 305 cm, Load bed height 90 cm, Gooseneck lenght 430 cm, Gooseneck height 160 cm, Kingping height 120 cm, Ramp lenght 405 cm, Shipment dimensions: 1410x255x335 cm = More information = Axle configuration Tyre size: 235/75 R17.5 Make axles: Saf Hjdpfju H D Taex Alyjfk Brakes: drum brakes Suspension: air suspension Axle 1: Double wheels; Lift axle; Tyre profile left outer: 15%; Tyre profile right outer: 80% Axle 2: Double wheels; Tyre profile left outer: 60%; Tyre profile right outer: 50% Axle 3: Double wheels; Steering; Tyre profile left outer: 70%; Tyre profile right outer: 70% Axle 4: Double wheels; Steering; Tyre profile left outer: 75%; Tyre profile right outer: 65% Weights Empty weight: 11.480 kg Carrying capacity: 49.320 kg GVW: 60.800 kg Functional Make of bodywork: Faymonville Height of cargo floor: 90 cm Identification Registration number: C525073 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, machine/vehicle number: YAFTL408100008968, axle configuration: > 3 axles, first registration: 01/2008, total length: 13,400 mm, total width: 2,750 mm, total height: 3,400 mm, suspension: air, tire size: 245/70 R17.5, color: other, Year of construction: 2008, = Additional options and accessories = - Drum brakes - Steering Axle = Remarks = Chassis Diameter coupling pin / coupling plate: 2 inch Height of coupling pin / drawbar: 120 cm Drum brake: ✓ Structure Construction year: 2008 Faymonville extendable 4-axle semi-lowbed trailer type STN 4AU, Gross weight 65000 kg, Load bed lenght 910 cm, Max load bed lenght when extended..... cm, Max load bed width 3 cm (275 cm), Load bed height 90 cm, Hydraulic ramps, Ramp width 85 cm, Air suspension, 2 passive steering axles, Gigant axles, Drum brakes, ABS, Tire size 245/70R17.5, Double tires, Shipment dimensions 1340x275x340 cm = More information = Axle configuration Make axles: Gigant Brakes: drum brakes Suspension: air suspension Front axle: Tyre size: 245/70 R17.5; Tyre profile left: 60%; Tyre profile right: 35% Middle axle: Tyre size: 245/70 R22.5; Tyre profile left: %; Tyre profile right: 50% Rear axle 1: Tyre size: 245/70 R17.5; Steering; Tyre profile left: 45%; Tyre profile right: 20% Rear axle 2: Tyre size: 245/70 R17.5; Steering; Tyre profile left: 50%; Tyre profile right: 60% Hjdsxhgirjpfx Alyjfk Weights Empty weight: 17.500 kg Carrying capacity: 47.500 kg GVW: 65.000 kg Functional Make of bodywork: Faymonville = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, machine/vehicle number: ***YAMT13XX6K0104043, axle configuration: 3 axles, first registration: 01/2019, total length: 13,800 mm, total width: 2,550 mm, total height: 3,410 mm, suspension: air, tire size: 235/75 R17.5, color: other, Year of construction: 2019, Chassis Chassis height: 87 cm Diameter coupling pin / coupling plate: 2 inch Height of coupling pin / drawbar: 120 cm Special Transport 2-piece driving plates: ✓ Hydraulic ramps: ✓ Length of loading floor: 930 cm Length of ramps: 395 cm Length of swan neck: 415 cm Lowbed trailer: ✓ Max width: 300 cm (25 cm per side) Max. length: 1380 cm Expandable: ✓ Tank Fuel: ✓ NON-EU VEHICLE, REQUIRES CUSTOMS CLEARANCE // 3-axle semi-lowbed trailer with hydraulic ramps, Max design weights 49500 kg, ABS, Air suspension, Drum brakes, SAF axles, Tyres 235/75R17.5, 3rd axle steering axle. // Dimensions // Load bed lenght 930 cm, Load bed width 250 cm, Load bed height 87 cm, Gooseneck lenght 415 cm, Gooseneck floor height 148 cm, Kingpin height 120 cm, Kingpin diameter 2 inches, Ramp lenght 395 cm, Ramp width 80 cm // Shipment dimensions 1380x255x341 cm = More information = Axle configuration Tyre size: 235/75 R17.5 Make axles: Saf Brakes: drum brakes Suspension: air suspension Axle 1: Double wheels; Tyre profile left outer: 60%; Tyre profile right outer: 60% Axle 2: Double wheels; Tyre profile left outer: 20%; Tyre profile right outer: 30% Axle 3: Double wheels; Steering; Tyre profile left outer: 55%; Tyre profile right outer: 50% Weights Hfedpeu H D R Eofx Alysk Empty weight: 10.040 kg Carrying capacity: 30.960 kg GVW: 41.000 kg Functional Make of bodywork: Faymonville Height of cargo floor: 87 cm Identification Registration number: C505325 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 8,000 kg, first registration: 11/2017, total length: 135,000 mm, total width: 2,540 mm, total height: 780 mm, color: black, Year of construction: 2017, Equipment: ABS, = Additional options and equipment = - Air suspension = Further information = Axle configuration Rear axle 1: Max. axle load: 8,000 kg Rear axle 2: Max. axle load: 8,000 kg; Steered Rear axle 3: Max. axle load: 8,000 kg; Steered Rear axle 4: Max. axle load: 8,000 kg; Steered Weights Empty weight: 14,800 kg Hfsdpfx Aleyx Hwysyok Payload: 42,200 kg Gross vehicle weight (GVW): 57,000 kg Condition Technical condition: good Visual condition: good Damages: none Financial information Price: On request Further information Please contact David F Middelman for more information.

Condition: excellent (used), axle configuration: 3 axles, first registration: 07/2016, suspension: air, Year of construction: 2016, Equipment: tail-lift, Suspension: Air suspension Rear axle 1: Steered Rear axle 2: Steered Rear axle 3: Steered Gross vehicle weight: 48,000 kg Technical condition: Very good Visual condition: Very good Price: On request Hfodpfx Aovvwzrelyek Please contact David F Middelman for further information.

Condition: excellent (used), axle configuration: 2 axles, first registration: 09/2020, color: red, Year of construction: 2020, Equipment: ABS, Rear axle 1: Twin tires Rear axle 2: Twin tires; Steered Unladen weight: 8,060 kg Loading platform height: 86 cm Extendable body: Yes Technical condition: Very good Visual condition: Very good Price: On request FAYMONVILLE F-S42-111A SEMI LOWLOADER Hedex Upxxspfx Alyefk 2x SAF axles 1x steering axle (trailing) Tire size Extendable loading platform Size: 680 cm + 420 cm extendable / Total platform length: 1,100 cm Platform width: 254 cm Platform height: approx. 86 cm Gooseneck length: 330 cm Lashing eyes, stanchion sockets, twistlocks Follow us on Instagram: GEURTSTRUCKS Lowloader is year 2016 but sold new in 2020 We speak German Hablamos Español We speak English