Used Faymonville Trailers for sale (221)

Condition: used, maximum load weight: 36,650 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 11/2021, next inspection (TÜV): 11/2025, Equipment: ABS, Excerpt of Equipment Loading Platform: Loading platform in extendable design with pneumatically operated locking mechanism. 2 pairs of horizontal lashing rings (LC 5,000 daN). 1 pair of lashing rings in the neck (LC 10,000 daN). 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN). 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN). Cut-outs in the outer frame of the loading area for attaching tension belts (LC 2,000 daN). Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load). Tyres: Tyres 245/70 R 17.5 – brand of our choice. Load index (146/146F). Axles: BPW axles, hydro-mechanically forced-steered. Air suspension with lift and lower valve. Axle tool kit. Brake System: Brake system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit. Steel Construction: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa). Coating: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) top coat, single color in RAL 3002 Carmine Red. Rear section metallized and painted in RAL 9010 (Pure White). Rims silver. No metallic paint available. Electrical System: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX at the front connection strip with socket outlets 24N, 24S & 15-pin. Connections compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Warning Boards: On the gooseneck and rear plate, a holder for warning boards each, including socket outlet, left and right. Includes the following additional equipment: - Rear steering controllable from the front and rear via cable remote control with push buttons, including single-track axle monitoring (without installation in the tractor unit) - Electro-hydraulic power pack. (± 45kg) - 4 wheel chocks with holder at the front wall. (± 5kg) - 2-inch kingpin - A galvanized steel front wall (EN12642-XL), approx. 1,600 mm high. (± 35kg) - Yellow-red air couplings on the galvanized connection strip at the front. - Yellow reflective tape according to EU regulations on the side, on the extension and at the rear of the trailer. - European reflector plates (red-yellow) at the rear of the trailer. - A mudflap at the rear of the trailer. - Manual and description on USB stick. - A bracket for a rotating beacon at the rear of the trailer. - Loading area with heavy-duty hardwood floor. - 9 pairs of stake pockets for drop-in stakes approx. 100 x 50 mm located in the outer frame of the loading platform. (± 27kg) - Extensions, galvanized, extendable by approx. 230 mm per side. (± 230kg) - Spiral cable for powering the electro-hydraulic pack and/or electric winch (approx. 35 mm², approx. 3.5 m long, max. 250A) between trailer and tractor unit with socket connection (NATO-NATO) - Galvanized supports under the bevel of the loading area. - On the central beam, a painted sand coating as anti-slip protection. - 6 pairs of WADER container pockets in the loading area, for 1x20' container, 2 x 20' containers or 1 x 40' container; an additional locking point is provided in the extension for a 45' container. (± 90kg) - 4 pairs of transverse stake pocket strips, mounted acro Bsdex Epznepfx Affocu

Condition: new, maximum load weight: 37,820 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment. Full equipment details available upon request. Gooseneck: - Gooseneck with beveled front corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood floor covering approx. 30 mm thick Loading area: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with square climbing slats approx. 15 x 15 mm and widenings in the lower section - Between the 1st and 2nd axles, a pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load approx. 5 t/each - Recess in the chamfer and extending into the loading area for receiving the excavator bucket arm (approx. 2,900 x 750 x 210/290 mm (L x W x H)) - 1 pair of lashing rings, horizontal, at the front of the loading area (LC 10,000 daN) - 5 pairs of flip-out lashing rings (LC 5,000 daN) - 3 pairs of flip-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) One-piece Steel Ramps: - One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering - Ramp with hydraulic lifting mechanism, hydraulically adjustable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps with a length less than 300 mm do not count towards the vehicle length in the driving position Landing gears: - JOST landing gears (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: - BPW axles and suspension, 2 fixed axles, 1 trailing steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lower valve - Axle tool kit Tyres: - Tyres 235/75 R 17.5 3PMSF – manufacturer of our choice - TPMS tyre pressure monitoring system in accordance with ECE R 141. The data transmission to the truck is via standardized EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display this data Braking system: - WABCO braking system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel construction: - Steel structure made of high-tensile fine-grain steels Bsdpfjw Tpqwex Affjcu - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system according to EU regulations - Lighting 24 volts ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets as per ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: - Complete steel structure automatically shot-blasted with blasting wheel machine after welding - Second shot-blasting using corundum for optimal coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure maximum corrosion protection - Final painting with 2 coats of two-component topcoat, single color in RAL 3002 Carmine Red, according to the RAL system 841GL - Rims in silver - Rear section metallized and in RAL 9010 (continuation see ori

Condition: used, maximum load weight: 32,000 kg, overall weight: 49,500 kg, axle configuration: 3 axles, first registration: 01/2022, total width: 2,540 mm, total height: 3,620 mm, Equipment: ABS, Steered axle, steel rims, forced steering: 1 axle, air brakes, toolbox, central lubrication system, twin tyres, BPW axles, wooden floor, used vehicle, electronic braking system. Bjdpjx Dpxzsfx Affjcu Vehicle no. 3250, Gross weight: 42,000 kg / 49,500 kg, Kerb weight: 10,000 kg, 3-axle low loader, 3rd axle is a self-steering trailing axle, air suspension with lifting and lowering system, gooseneck: 3,750 mm with 1,000 mm tapered section, low bed loading length: 9,600 mm with 1,000 mm rear taper, hydraulic platform for driving over to the gooseneck: 3,000 mm, lashing rings on gooseneck and low bed, mechanical rear support, toolbox, 2 axle load gauges, electro-hydraulic unit for ramps and platform via NATO plug, central lubrication system, warning signs, electric cable winch approx. 5,400 kg lifting capacity, steel wire rope approx. 38 m long, hydraulic steel ramps 2,910 + 1,735 mm x 850 mm, hydraulically adjustable, BPW axles, tyres: 235/75 R 17.5, financing and leasing available, subject to errors and prior sale.

Condition: used, axle configuration: 3 axles, total length: 14,000 mm, total height: 3,500 mm, suspension: air, tire size: 235/75R17.5, tire condition: 25 %, Tyre size: 235/75R17.5 Tyre profile: 25% Brakes: drum brakes Suspension: air suspension Bsdpfsxrhk Sjx Affscu = Dealer information = Please mention always the stocknumber by your demands ( 8 digits) Buying with Smz-Smeets & Zonen : - since 1976 in business : trustable company/selling17000 units yearly/65.000 units sold; 1000 on stock. - service A-Z worldwide, Top loadings for cheaper transport. Worldwide shipping- transit plates (not included) - selling all new + used parts tyres, oils : We advertise with our lowest prices. Check to see our complete stock and specials we are located on a 130.000m2 , 20.000m2 storage,work and bodyshop fully equiped. See our company video:

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2016, Equipment: ABS, Visit our website, where you can find our complete vehicle stock with many more photos and information in several languages. Bsdpev Dp H Aefx Affscu SEL 7432 (10.2026/04.2026) Faymonville Telemax Telescopic / 13,650mm - 21,550mm German registration First registration: 01.2016 Gross vehicle weight (kg): 48,000 Permitted total weight (kg): 42,000 Unladen weight (kg): 9,500 VIN: YAFSR3000G0018145 Technical inspection: 02.2025 / Safety inspection: 08.2025 TIRES AND AXLES: Tires: 235/75 R 17.5 Axle configuration: 3 axles 3rd axle self-steering Air suspension Drum brakes BODY: Platform extension (mm): 7,900 OTHER SPECIFICATIONS: Lashing rings Stake pocket rails Telescopic VEHICLE DOCUMENTS: Registration certificate part I Registration certificate part II Additional documents are available on request for an extra charge. M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC d. (Deutsch, Bosanski) L. OBODYNSKA Ukrainian/?????, Russian/??-?????) We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH Although every effort has been made to ensure the accuracy of the information, we cannot assume responsibility for any errors or omissions. We ask our customers to consult the available photos. The specified dimensions are approximate. Our vehicles are sold in their current condition, as they are. We invite customers to visit our company to inspect the condition of the vehicle in person. We also offer the option of a test drive. Please note that the batteries supplied with the vehicle are those currently installed. Should the customer require new batteries, we are available to provide information regarding prices.

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2015, Equipment: ABS, GERMAN Visit our website, where you will find our complete vehicle stock with many more photos and information in several languages. SEL 7491 Faymonville F-S43-1BGA Telescopic / Steering Axle German registration First registration: 27.05.2015 Techn. total gross weight (kg): 48,000 Bedpfx Ajwknudsffjcu Permitted total weight (kg): 42,000 Empty weight (kg): 9,500 VIN: YAFSR300XF0016868 TIRES AND AXLES: Tires: 235/75 R 17.5 Axle configuration: 3 axles SAF 3rd axle is self-steering Air suspension Drum brakes OTHER SPECIFICATIONS: Telescopic VEHICLE DOCUMENTS: Registration Title M. BUFANO m. (Italian, English, German) J. CORDEIRO j. (Portuguese, Spanish, Italian, English) J. MARJANOVIC d. (German, Bosnian) L. OBODYNSKA Ukrainian, Russian We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH Although every effort has been made to ensure the accuracy of the information, we cannot accept liability for errors or omissions. We ask our customers to consult the available photos. The listed dimensions are approximate values. Our vehicles are sold as-is, in the condition they are in. We invite customers to visit our company to inspect the vehicle’s condition personally. We also offer the opportunity for a test drive. It is important to note that the batteries supplied with the vehicle are the ones currently installed. If the customer wants new batteries, we are available for price information.

Condition: excellent (used), first registration: 07/2021, loading space length: 134,500 mm, loading space width: 2,550 mm, loading space height: 770 mm, total length: 134,500 mm, total width: 2,550 mm, total height: 770 mm, color: other, Year of construction: 2021, Equipment: ABS, = Further options and accessories = Bsdpfxoutngcs Affecu - Air suspension = Further information = Unladen weight: 8,520 kg Payload: 31,000 kg Gross vehicle weight: 50,900 kg Loading platform height: 77 cm Technical condition: very good Optical condition: very good Damages: none

Condition: new, maximum load weight: 40,790 kg, overall weight: 59,000 kg, axle configuration: 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and soon-available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Gooseneck: - Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long - Gooseneck hydraulically liftable/lowerable and detachable - For tractor units: 6x4 or 8x4 Low bed: - Low bed with external beams, extendable design, SUPER LOW version, approx. 7,550 mm long - Low bed with fixed hardwood flooring, approx. 40 mm thick, and mechanical locking - Supply lines are protected within the extendable beams and automatically adjust to the current bed length - 7 pairs of lashing rings, foldable outward (approx. LC 10,000 daN) - 6 pairs of threaded blocks on the inner beam for mounting bolt-on RUD rings Rear running gear: - Rear running gear with closed outer frame, checker plate floor and continuous prism excavator trough, approx. 1,450/900 x 505 mm, open at the rear - 2 pairs of lashing rings, foldable outward (approx. LC 10,000 daN) - 1 pair of flat lashing rings in the trough (approx. LC 10,000 daN) - 2 pairs of flat lashing rings in the trough (approx. LC 16,000 daN) - 2 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm in the outer frame PENDLE-AXLE: - PENDLE-AXLE, all axles hydro-mechanically forced-steered - Hose rupture valve on axle compensation cylinder with automatic reset function - Hydraulic cylinders with shut-off valves and lock pins to secure in raised position - Final coating of axles with 2 coats of 2-component paint, single color in grey 34-0260 - Technical axle load: 12,000 kg each - Hydraulic axle compensation - Axle tools Tyres: - Tyres 245/70 R 17.5 3PMSF – brand of our choice. Load index (146/146F) Braking system: - Braking system according to EU regulations with EBS-E (2S2M) without interconnected lines to the tractor unit Electrical system: - Electrical system according to EU regulations - Lighting 24 Volt ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15 pin sockets. Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15 pin ISO-12098 Steel structure: - Steel structure made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: - Entire steel structure automatically shot-blasted with a wheel blasting machine after welding - Second abrasive blasting with corundum for optimal adhesion of the coating system - Final coating with 2 layers of 2K topcoat, single color in RAL 3002 carmine red according to RAL system 841GL - Rear section metallized and painted in RAL 9010 (pure white) - Rims in silver-grey - No metallic paintwork possible - Paint structure tested in salt spray test according to ISO 9227-NSS - Sealing of cavities with special wax Accessories included: - Preparation for installation of bolt-on container positioning devices for 1x 20' or 1x 40' container on the outer beams - Without container locks - 3.5-inch king pin - One galvanized steel front wall, approx. 400 mm high Bcsdpfx Aew Tprbeffou - One spare wheel carrier in front of the front wall - At the galvanized front connection bar, yellow-red air couplings - Remote steering from front and rear via cable remote control with push buttons, with single-track monitoring of axles (without installation in the tractor unit) - Electro-hydraulic unit - On the gooseneck, plug-in aluminium side and rear walls, approx. 2,000 x 400 mm (L x H)

Condition: new, maximum load weight: 90,700 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Bedpjw Tgp Dsfx Affocu Extract from the specifications. Complete equipment list available upon request. Gooseneck: Gooseneck hydraulically liftable/lowerable and detachable. Length approx. 3,650 mm. For tractor units: 6x4 or 8x4 3-axle compact front bogie: * Hook mounts at the front and rear. Length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Lowbed: * Lowbed ATX-A with telescopic longitudinal beams in low design with fixed hardwood floor approx. 50 mm thick * With drive-over bridging hooks at the front and pin-lug coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Beam height: approx. 330 mm, Beam width: approx. 750 mm * Loading height approx. 480 mm with ground clearance approx. 150 mm 5-axle rear bogie: * Mechanical pin-lug coupling for mounting a lowbed at the front, rear end traverse at the back * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * Pendle axle 3-axle front bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Front bogie tires: 12 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J 5-axle rear bogie: * PENDLE-AXLE, all axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off cocks and lock pins for securing in raised position * Final painting of axles with 2 coats of 2-component paint, single color in MB7350 Novagrau * Technical axle load: 14,640 kg each (62 km/h) * Hydraulic axle compensation * Rear bogie tires: 20 x manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork: * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) to ensure optimal corrosion protection * Final coat with 2 layers of 2-component topcoat, single color in RAL 3002 Carmine Red, according to RAL system 841GL Includes accessories: * Steel front bulkhead, approx. 400 mm high * Plug-in ALU side and rear boards on the gooseneck, approx. 400 mm high, anodized finish * 3.5 kingpin * BEKA-MAX central lubrication for one gooseneck * Multi-coupling hydraulic connections at the gooseneck * Front bogie with a separate air connection for pneumatic screwdriver * BEKA-MAX central lubrication for a 3-axle bogie * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 30' containers on the outer beams * Without container locks * Mounts for foldable extensions outside on the outer beams of the loading area * One 7-pin socket left and right, front and rear on the rear bogie for warning signs * BEKA-MAX central lubrication for a 5-axle bogie * Socket on the rear bogie for the cable remote control of the steering override * Rear bogie with trough * 2 LED reverse lights mounted on the rear panel * European reflector panels (red-yellow) at the rear * One mud flap at the rear * One LED beacon with bracket left and right on the rear traverse * Two INOX toolboxes 855 x 340 x 390 mm on the gooseneck, left and right * 1-cycle

Condition: new, maximum load weight: 25,645 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of immediately and soon-to-be available vehicles on our website. Excerpt from equipment specification. Complete specification available on request. Load area: - Low-bed design with central beam, extendable version, approx. 6,750 mm in length - 5 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the loading platform (LC 10,000 daN) Gooseneck: - Hydraulic lifting/lowering gooseneck, detachable Rear chassis: Bedpfx Afsxf Silefscu - Short rear chassis with closed outer frame and checker plate covering - Chassis with excavator trough, closed in the rear half for housing the air tanks - 2 pairs of fold-out external lashing rings (LC 5,000 daN) - 1 pair of fold-out external lashing rings (LC 10,000 daN) - 1 pair of flat-mounted lashing rings at the rear of the chassis (LC 10,000 daN) Axles: - BPW axles, hydro-mechanically forced steering - Air suspension with raise/lower control valve Tyres: - Tyres 245/70 R 17.5, 3PMSF - TPMS: Tyre Pressure Monitoring System according to ECE R 141 Brake system: - Wabco braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: - High-quality single-tone 2-component (2K) top coat in RAL 3000 Flame Red Including the following additional equipment: - 2 kingpins - Galvanised steel front wall, approx. 400 mm high - Remote steering from front and rear, operated by cable remote control with push buttons, including single tracking control for the axles (no installation in the tractor unit) - Electro-hydraulic unit - Axle load gauge including load diagram - On the gooseneck, removable aluminium side walls and rear wall, approx. 2,440 x 400 mm (L x H). Rear galvanised stake pockets are removable. (Body length approx. 2,560 mm) - Separate air connection with air gun on the gooseneck - 2 work lights with switch on the trailer, mounted on the left and right of the gooseneck platform - 1 INOX toolbox, approx. 1,350 x 400 x 400 mm, on the gooseneck - 6 pairs of stake pockets for insertable posts approx. 100 x 50 mm in the outer frame of the load area, 2 pairs in the chassis outer frame - Galvanised, extendable width extensions approx. 230 mm per side - Hydraulic connections from gooseneck to low bed with multi-coupling (instead of screw couplings). No seal guarantee included. - Central lubrication system with 2 BEKAMAX (Pico) pumps, standard NLGI-2 grease, with removable protection around the pump - 2 pairs of WADER container locks on the loading area, for 1x20' container - 1 removable galvanised intermediate table with 1 pair of WADER container locks - 1 pair of steel ramps for bridging the low bed’s hook mountings - Anti-slip sand-coated layer painted on the load area - HRM Metallisation (High Resistance Metallisation)

Condition: new, maximum load weight: 30,190 kg, overall weight: 43,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including immediately and soon available vehicles, on our website. Partial equipment list. Full specification available upon request. Loading Platform: * Low bed with external beams, extendable SUPER LOW design, length approx. 6,850 mm * Low bed with fixed hardwood flooring, about 40 mm thick, with mechanical locking system * Service lines are protected within the extendable beams and automatically adjust to the corresponding low bed length * 5 pairs of lashing rings, foldable outward (LC 10,000 daN) * 6 pairs of threaded blocks on the inner beam for mounting bolted RUD rings Gooseneck: * Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm * Gooseneck hydraulically liftable/lowerable and detachable * Technical fifth-wheel load: 23,000 kg * For tractor units: 4 x 2, 6 x 2 Rear Chassis: * Rear chassis in short version with closed outer frame and checker plate cover * Chassis equipped with excavator trough, closed in the rear half to house air tanks * 2 pairs of lashing rings, foldable outward (LC 5,000 daN) * 1 pair of lashing rings, foldable outward (LC 10,000 daN) * 1 pair of lashing rings, flat-mounted, on the front & rear of the chassis (LC 10,000 daN) Axles: * BPW axles, hydro-mechanically forced steered * Technical axle load: 12,000 kg each * Air suspension with lift and lower valve Tyres: * Tyres 245/70 R 17.5 3PMSF * Manufacturer of our choice * Load index (146/146F) * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to the truck via standardized EBS interface according to ISO 11992 * For correct display, the truck must be capable of transmitting and displaying this data Braking System: * Braking system compliant with EU regulations, with EBS-E (2S2M) Electrical System: * Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection rail with sockets 24N, 24S & 15-pin, compliant with ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel construction made from high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Coating: * Complete steel structure automatically shot-blasted after welding using a Grit Wheel System Bodpfxexarl No Affecu * Second blasting with corundum for optimal coating adhesion * HRM metalizing of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final coating with two layers of 2K topcoat, solid color in RAL 3002 carmine red as per RAL system 841GL * Wheels in silver * Rear section metalized and coated in RAL 9010 (pure white) * Metallic paint not possible * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including the following additional equipment: * 2-inch kingpin * One galvanized steel front wall, approx. 400 mm high * Remote steering from front and rear via cable remote control with push-buttons, with single-track control of axles (without installation on tractor unit) * Hydraulic connections from gooseneck to low bed with multi-coupling instead of screw couplings * Electro-hydraulic power unit * Preparation for mounting of bolt-on container locks for 1 x 20' or 1 x 40' container on the...

Condition: used, Year of construction: 2020, Maxtrailer F-S43-1AAF. Year: 2020. 10.5 tons SAF axles. Max weight: 49,500 kg. Kingpin load: 18,000 kg. Hydraulic from trailer works on NATO. EBA ABS ALB. Toolbox on neck. Hydraulic bridge from floor to neck. Bcsdpfjxyydysx Affou Lenght: 2800 mm. 2 x 25 cm widened. Airsuspension. 3rd axle steering axle. Hydraulic ramps (hydraulic from left to right). Lenght: 4100 mm. Dimmensions: Neck: L: 3450 mm. W: 2550 mm. H: 1470 mm. Kingpin height: 1250 mm. Floor: L: 9300 mm. W: 2550 mm. H: 900 mm. Tyres: 235/75R17.5 80%. ID NR: 549. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of construction: 2020 GVW: 49,500 kg = Company information = For more information: WhatsApp:

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: YA9TL510050113953, empty load weight: 27,720 kg, maximum load weight: 70,000 kg, overall weight: 100,000 kg, axle configuration: > 3 axles, first registration: 08/2005, next inspection (TÜV): 12/2026, loading space length: 14,200 mm, loading space width: 3,250 mm, total length: 23,950 mm, total width: 3,250 mm, total height: 1,050 mm, suspension: hydraulics, color: blue, Year of construction: 2005, number of axes: 7, For sale: low loader from Faymonville. Number of axles: 2+5 = 7 Bcjdpfx Aox Afbveffsu Always serviced in our own workshop and is in top condition. The trailer has been used exclusively for transports within the EU – Baltics, Germany, and the surrounding region. Approximately 1–2 times every three months. The low loader is located in Latvia, 3405 Liepaja! See details in the photos!

Condition: used, machine/vehicle number: YAFTL4005F0017017, axle configuration: > 3 axles, first registration: 01/2015, total length: 13,900 mm, total width: 2,750 mm, total height: 3,300 mm, suspension: air, tire size: 245/70 R17.5, color: other, Year of construction: 2015, Equipment: ABS, = Additional options and accessories = - Drum brakes = Remarks = Chassis Diameter coupling pin / coupling plate: 2 inch Height of coupling pin / drawbar: 120 cm Drum brake: ✓ Structure Construction year: 2015 Special Transport Hydraulic ramps: ✓ Length above axes: 880 cm Length of loading floor: 880 cm (extents 660 cm) Length of swan neck: 420 cm Lowbed trailer: ✓ Max width: 3 cm ( 275 cm) Max. length: 1540 cm (880 +660 cm) Expandable: ✓ Extendable: ✓ NON-EU VEHICLE, REQUIRES CUSTOMS CLEARANCE // Faymonville extendable semi-lowbed trailer, Year of construction 2015, Max gross weight 73000 kg, Load bed lenght 880 cm, Extention loadbed 660 cm, Load bed widht 275 cm, Max load bed width 3 cm, Loading floor height 85 cm, Goose neck lenght 420 cm, Hydraulic ramps, 2 passive steering axles, Air suspension, Gigant axles, Drum brakes, tire size 245/70R17.5, ABS, Shipment dimensions 1390x275x330 cm = More information = Axle configuration Tyre size: 245/70 R17.5 Make axles: Gigant Brakes: drum brakes Suspension: air suspension Front axle: Double wheels; Tyre profile left inner: 45%; Tyre profile right outer: 60% Middle axle 1: Double wheels; Tyre profile left inner: 20%; Tyre profile right outer: 30% Middle axle 2: Double wheels; Steering; Tyre profile left inner: 55%; Tyre profile right outer: 40% Rear axle: Double wheels; Steering; Tyre profile left inner: 40%; Tyre profile right outer: 50% Weights Empty weight: 11.750 kg Carrying capacity: 61.0 kg GVW: 73.000 kg Functional Make of bodywork: Faymonville F-S44-1ALN Height of cargo floor: 85 cm = Dealer information = Bodsxyffpjpfx Affocu For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, axle configuration: > 3 axles, first registration: 10/2006, total width: 2,850 mm, suspension: other, tire size: 285/70R19.5, color: black, Year of construction: 2006, Equipment: ABS, = Additional Options and Accessories = - Central lubrication = Notes = Faymonville Jeep Dolly D3 Year: 10-2006. 1 x lift axle. 1 x friction-steered axle / trailing steering axle. Air suspension. Maximum technical weight: 56,000 kg. Faymonville STBZ-5VA Year: 10-2006. Pendulum axle. Detachable gooseneck. Movable table. Extendable bed: 400 cm. Loading bed: 650 + 400 cm. 50,000 kg gooseneck load. Maximum technical weight: 119,680 kg. = Further Information = Axle Configuration Tire size: 285/70R19.5 Brakes: Drum brakes Front axle 1: Twin tyres; Tire tread left inner: 15%; Tire tread left outer: 60%; Tire tread right inner: 60%; Tire tread right outer: 60%; Suspension: Air suspension Front axle 2: Twin tyres; Tire tread left inner: 30%; Tire tread left outer: 30%; Tire tread right inner: 40%; Tire tread right outer: 60%; Suspension: Air suspension Bedpfx Aoxbng Eeffjcu Front axle 3: Twin tyres; Steered; Tire tread left inner: 30%; Tire tread left outer: 70%; Tire tread right inner: 60%; Tire tread right outer: 70%; Suspension: Air suspension Rear axle 1: Twin tyres; Steered; Tire tread left inner: 30%; Tire tread left outer: 60%; Tire tread right inner: 40%; Tire tread right outer: 70%; Suspension: Hydraulic suspension Rear axle 2: Twin tyres; Steered; Tire tread left inner: 50%; Tire tread left outer: 50%; Tire tread right inner: 30%; Tire tread right outer: 75%; Suspension: Hydraulic suspension Rear axle 3: Twin tyres; Steered; Tire tread left inner: 60%; Tire tread left outer: 60%; Tire tread right inner: 60%; Tire tread right outer: 60%; Suspension: Hydraulic suspension Rear axle 4: Twin tyres; Steered; Tire tread left inner: 60%; Tire tread left outer: 60%; Tire tread right inner: 40%; Tire tread right outer: 50%; Suspension: Hydraulic suspension Rear axle 5: Twin tyres; Steered; Tire tread left inner: 70%; Tire tread left outer: 70%; Tire tread right inner: 20%; Tire tread right outer: 70%; Suspension: Hydraulic suspension Weights Unladen weight: 36,600 kg Payload: 83,080 kg Gross vehicle weight: 119,680 kg Financial Information Price: On request Identification Type number: STBZ-5VA + 3 AXLE JEEP DOLLY / E = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT). We speak Russian. We strive to provide correct information, but no rights can be derived from these entries.

Condition: new, axle configuration: 2 axles, loading space length: 18,700 mm, loading space width: 3,000 mm, loading space height: 350 mm, total length: 18,700 mm, total width: 3,000 mm, total height: 350 mm, suspension: hydraulics, tire size: Tyres: 245 / 70 R17.5 Double fitted (load index 146/146 F), color: red, Year of construction: 2025, = Further Information = General Information Year of manufacture: 2025 Applications: Agriculture, forestry, construction, drainage, fruit growing, earthmoving, land management, internal logistics, arable farming, mining, soil drainage, parking management, recycling, cleaning, demolition, horticulture, livestock farming, and road construction Axle Configuration Tyre size: 245/70 R17.5 twin tires (load index 146/146 F) Suspension: Hydraulic suspension Rear axle 1: twin tires; max. axle load: 12,000 kg; steered Rear axle 2: twin tires; max. axle load: 12,000 kg; steered Weights Unladen weight: 13,211 kg Payload: 33,789 kg Gross vehicle weight (GVW): 47,000 kg Functional Extendable design: Yes Condition General condition: good Technical condition: good Optical condition: good Bcodpfx Afoxyihhefju Financial Information Price: On request Further Information Please contact Stefan Schaapveld for further details.

Condition: used, color: red, Year of construction: 2014, Faymonville F-S42-1AAA. Year of manufacture: 2014. 11.2-ton SAF axles. Dead weight: 11,300 kg. Payload capacity: 36,100 kg. Gross vehicle weight: 47,400 kg. Kingpin load: 25,000 kg. Double extendable: 1st extension: 4.60 m 2nd extension: 4.60 m Total extension: 9.2 m Power steering with 2 steering axles. Bsdexx S Eyspfx Affocu Air suspension. Radio remote control. Hydraulics powered via NATO connection from truck. Galvanised (zinc-coated). Dimensions: Neck: Length: 4,000 mm Width: 2,480 mm Height: 1,600 mm Kingpin height: 1,350 mm Load floor: Length: 7,500 mm Width: 2,550 mm Height: 950 mm Tyres: 235/75R17.5, 80% remaining tread ID number: 491 The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations of Heinhuis, all contracts entered into by Heinhuis, as well as the negotiations preceding them. By responding in any form, you accept the applicability of the Heinhuis General Terms and Conditions and confirm that you have taken note of these General Terms and Conditions. Our prices are net export prices. = More information = Year of manufacture: 2014 Unladen weight: 11,300 kg Payload: 36,100 kg Gross vehicle weight: 47,400 kg Extendable body: Yes = Company information = For more information: WhatsApp:

Condition: used, empty load weight: 10,650 kg, maximum load weight: 40,310 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, first registration: 10/2024, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 760 mm, suspension: air, tire size: 205/65 R17.5, color: grey, Year of construction: 2024, operation weight: 10,650 kg, Equipment: ABS, For every used semi-trailer, you receive a current and complete inspection and functional report. Gooseneck: - Gooseneck with 30 mm hardwood flooring - Gooseneck with straight rear design - 3 pairs of lashing rings (LC 5,000 daN) Loading surface: - Extendable loading platform - 5 pairs of folding outward lashing rings (LC 5,000 daN) - 3 pairs of folding outward lashing rings (LC 10,000 daN) - 1 pair of flat lashing rings at the front of the loading platform (LC 10,000 daN) - Cut-outs in the outer frame of the loading platform for attaching tension belts (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, with chequer plate floor above the axles Axles and tyres: - BPW axles, two rigid and two self-steering trailing axles - Air suspension, with drum brake, with lift/lower function - The self-steering axles can be locked electromagnetically via reverse gear or manually - Axle tools - Tyres 205/65 R17.5 Braking system: - WABCO braking system according to EU regulations with EBS-E (4S3M) Steel construction: - Steel structure made from high-strength fine-grain steels - Steel qualities: - S355J2+N/S355MC (yield strength 355MPa) - S690QL/S700MC (yield strength 690MPa) Bcodpfx Afoxfa E Uefou Paintwork: - Premium and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, single-colour, in Nova Gray Accessories included: - Spare wheel carrier in front of the bulkhead - 2" king pin - Galvanised steel bulkhead approx. 400 mm high - Yellow-red air couplings on the galvanised front connector strip - 4 wheel chocks with holder on the bulkhead - Galvanised folding supports under the chamfer of the loading platform - Bracket for rotating beacon at the rear of the trailer - Galvanised extendable widening devices, extendable by approx. 230 mm per side - White reflective tape to EU standards on the sides, on the extension, and red at the rear - One mounting bracket each for warning signs, including socket, on the gooseneck and rear plate left and right - One mudflap at the rear - European reflector plates (red-yellow) at the rear of the trailer - TPMS tyre pressure monitoring system according to ECE R 141 - Removable ALU sidewalls and rear wall on the gooseneck approx. 2,440 x 400 mm - Rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) - 7 pairs of WADER container pockets: 1x 20ft container on the loading platform; 1x 40ft container on the loading platform; 1x 40ft container over the gooseneck; 2x 20ft containers - 7 pairs of stake pockets for 100 x 50 mm stanchions in the outer frame of the loading platform - Lift axle on the front axle with control via TEBS E depending on axle load and current payload status - Movable hanging bar for ALU loading ramps at the rear of the vehicle - Anti-slip sand coating painted onto the chequer plates on the gooseneck and loading platform - Four extendable warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with positioning light - Mounting bracket for rotating beacon on the warning signs - 80 km/h speed stickers at the rear and on both sides - Load gauge for axle load determination including load diagram - HRM metallisation (High Resistance Metallisation) of the outer frame - Complete steel structure shot-blasted, then specified visible surfaces finished with ZINACOR 850 metallisation (Zinc 85% - Alu 15%) by hot-refining

Condition: used, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 06/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment. Complete equipment list available upon request. Loading Platform: * Gooseneck, approx. 4,100 mm long, with central beam Bcsdpfx Afew E A Egefeu * Loading platform in double-extendable design, approx. 9,400 mm long, with pneumatically operated locking mechanism * A fixed intermediate table, approx. 200 mm wide, is welded to the central beam * Supply lines are routed protected inside the extendable beams and automatically adapt to the respective loading platform length (exception: supply to the first locking mechanism) * For tractor units: 4 x 2 and 6 x 2 Axles and Suspension: * BPW axles and suspension, all axles hydro-mechanically force-steered, mounted on turntables * Technical air suspension with lift and lower valve Tyres: * 235/75 R 17.5 3PMSF twin tyres * Brand of our choice. Load index 143/141J (144/144F) Braking System: * WABCO EBS-E braking system according to EU regulations Metallisation: * Complete HRM metallisation (High Resistance Metallisation) * Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%) Painting: * 6-coat final treatment: Entire steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of adhesion primer. Final topcoat: 2 coats of 2-component acrylic paint, single colour, followed by cavity sealing with special wax * Trailer colour: RAL 3002 Carmine Red * Wheel rim colour: Silver grey * Lamp bracket colour: RAL 9010 Pure White Included Accessories: * Steel front wall, approx. 1,600 mm high, certified version according to EN12642:2016 XL. Max. load capacity: 20,000 daN * 4 pairs of recessed lashing rings in the gooseneck outer frame: the front 3 pairs fitted horizontally (LC 10,000 daN), rear pair fold-out to the outside (LC 10,000 daN) * 4 pairs of stake pockets set into the gooseneck outer frame for plug-in stakes approx. 100 x 50 mm * 1 transverse stake pocket rail mounted at the rear in the gooseneck floor for plug-in stakes approx. 100 x 50 mm * 2-inch kingpin * 4 wheel chocks with holders in front of the front wall * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B, static test bearing capacity approx. 50,000 kg * On gooseneck and loading platform, wooden flooring approx. 32 mm thick, framed in aluminium omega profiles * Large cross-section extension tube with a locking point every approx. 500 mm * Small cross-section extension tube with a locking point every approx. 1,000 mm, providing a locking interval of approx. 500 mm * 10 pairs of recessed horizontal lashing rings in the outer frame of the loading platform, fold-out to the outside: one pair before the last axle and one pair at the end crossmember of the trailer (LC 10,000 daN each), all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets set into the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm * 3 transverse stake pocket rails mounted in the loading platform floor for plug-in stakes approx. 100 x 50 mm * 1 spare wheel carrier under the loading area on the right-hand side (direction of travel) * 1 lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading area on the left (direction of travel) * Access ladder mounted on the right (direction of travel) * Last axle with air bellows venting activated by operating the parking brake * 3 kW electr

Condition: new, overall weight: 80,000 kg, axle configuration: > 3 axles, Equipment: ABS, More vehicles available – excerpt from the equipment specification. Full specification upon request. GOOSENECK Gooseneck in SNT design to optimize cargo bed length, approx. 3,700 mm long, rear with a beveled section approx. 1,000 mm x 10°. For tractor units: 4x2, 6x2, and 6x4. - Plug-in steel front wall, approx. 400 mm high - ASPÖCK-UNIBOX mounted at the front control panel with 24N, 24S & 15-pin sockets - 3 kW electro-hydraulic unit for controlling hydraulic functions, except hydraulic winches - Outer beams of the gooseneck with mounting holes for boltable lashing rings. First hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) - 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) - On the gooseneck: 1 pair of plug-in side ALU drop-sides, approx. 400 mm high, anodized finish - On the gooseneck: 1 plug-in rear ALU drop-side, approx. 400 mm high, anodized finish - Approx. 40 mm hardwood flooring on the gooseneck, over the kingpin chequer plate - 3.5-inch kingpin - Gooseneck guide plate for saddle plate, approx. 500 mm wide - Round NATO socket on the front connector panel (Maeler & Kaege VG 96 917) - 2 pairs of lashing rings with retaining spring, suspended from outer beams of the gooseneck (LC 5,000 daN) CARGO BED Extendable cargo bed, length approx. 8,800 mm with rear bevel approx. 500 mm x 10°. Pneumatic locking with conical locking pin and reinforced positions; supply lines are protected inside the extendable beams and automatically adjust to cargo bed length. - BPW axles and suspension: first axle self-steering, all others hydro-mechanical forced steering. First axle with electro-magnetic reverse lock, activated via reverse gear or manually. Technical axle load: 12,000 kg each. Air suspension with lift/lower valve. - 235/75 R 17.5 3PMSF twin tires – brand at our discretion - Mechanical landing gear with 2-speed gearbox and crank. JOST Module B – static test load = 50,000 kg - Cargo bed with continuous and between-axle interrupted approx. 50 mm hardwood floor (increases friction coefficient) - Elongated holes for hanging and movable bridging elements: - At front of cargo bed - 1 movable intermediate platform, approx. 300 mm wide, for extension tube with large cross-section, with chequer plate - Front and rear with elongated holes for hanging/movable bridging elements - 1 pair of lashing rings on front cross-member (LC 10,000 daN) - 7 pairs of recessed lashing rings in the outer frame, foldable to the outside (LC 10,000 daN) - Extendable (galvanized) bed wideners approx. 230 mm per side (without wood planks) - 1 pair of mechanical rear stabilizers - Steering from front and rear adjustable via remote cable control, with single-axle steering alignment, no installation in tractor unit Bedpfxjxarmae Affocu - TPMS tire pressure monitoring sensors installed on all wheels - Bed locking with conically welded lock profiles every 500 mm - Lock monitoring left and right on the trailer - For the intermediate platform, approx. 300 mm wide: mechanical lock to secure the platform on the extension - 5 pairs of threaded blocks on the extendable beam for mounting boltable M20 rings (LC 5,000 daN) BRAKE SYSTEM Brake system

Condition: used, maximum load weight: 42,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 06/2006, next inspection (TÜV): 02/2026, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Complete specification available on request. - BPW axles with drum brakes, air suspension, with lift and lowering valve - Interchangeable 3.5-inch kingpin - Extendable loading area with semi-automatic, pneumatically operated locking system - Loading platform hydraulically liftable and lowerable - 2 foldable, two-part loading ramps (approx. 2,950 + 1,650 x 850 mm) with hardwood covering - Wabco brake system ABS/EBS - Fixed steel front wall, slanted design, approx. 400 mm high - Chassis with continuous recess (excavator trough, approx. 950 x 250/330 mm), for accommodating the excavator arm - Rear cross member closed - Gooseneck hydraulically liftable and lowerable, approx. mm Bedpfx Afsxagghsfocu For sale on behalf of the customer

Condition: new, total length: 19,000 mm, total width: 600 mm, total height: 450 mm, Year of construction: 2022, Colour: Red Loading capacity: 430,000 kg Expandable Manufacturer: Faymonville Model: G-Module Vesseldeck Year: 2022 Compatible with Goldhofer THP SL Coupling Heads G-Module SL lowbed coupling head Hydraulically extendable Base width: 3,000 mm Hydraulically extendable to 4,700 mm Beam height: 450 mm Coupling length: 1,200 mm Weight: 4,500 kg 4 pairs of lashing rings (LC 16,000 daN) 2 alignment pins Control panel for hydraulic adjustments Colour: RAL 3002 Telescopic Beams 1 pair of telescopic beams Length: 8,000 mm + 5,000 mm Total length: 13,000 mm Construction height: 450 mm Beam width: 450/600 mm Weight: 9,600 kg Lashing rings every 1,000 mm LC 10,000 daN 430 MTO Compression connector at front and rear Colour: RAL 3002 Extension Beams 1 pair of extension beams Coupling length: 6,000 mm Construction height: 450 mm Bcsdpfx Aouu Hixeffsu Beam width: 450/600 mm Weight: 4,300 kg Lashing rings every 1,000 mm LC 10,000 daN 560 MTO Compression connector at front and rear Colour: RAL 3002 Coupling Pin 1 hydraulic coupling pin for G-Module 1 connecting lines kit for G-Module coupling pin = Further information = Year of manufacture: 2022 Unladen weight: 18,500 kg General condition: Very good Technical condition: Very good Visual condition: Very good Price: On request Please contact Stefan Schaapveld for further information.

Condition: new, axle configuration: > 3 axles, total length: 17,700 mm, total width: 2,990 mm, total height: 3,810 mm, suspension: hydraulics, tire size: 245/70 R17.5 Double Fitted (143/141J), color: red, Year of construction: 2024, Equipment: tail-lift, Color: Red Payload: 100,250 kg Weights: Kingpin load: 38,000 kg Axle load: 12,000 kg Total axle load: 96,000 kg Gross vehicle weight (GVW): 134,000 kg Unladen weight: 33,750 kg Payload: 100,250 kg Axles: Axle brand: BPW ECO PLUS Hydraulic suspension 7 steering axles (axle 2 fixed) First two axles are liftable Drum brakes ABS SN 3020 brakes, with sensors Tyres: 245/70 R17.5 twin tires Load index 143/141J Dimensions: Length: 17,700 mm Extensions: 19,500 mm Max. extended length: 37,900 mm Loading deck width: 3,990 / 3,450 mm Loading deck height: 1,050 mm +/- 150 mm Height: 3,815 mm Additional equipment: NATO plug Hydraulically foldable ramps Outriggers and planks for widening the loading platform Electro-hydraulic pump for trailer functions Spare wheel with holder Work lights Rear bumper with lights 2.0” kingpin Central greasing system Lashing rings Wooden loading platform Oversize load marker boards Remote control General information Year of manufacture: 2024 Axle configuration Tyre size: 245/70 R17.5 twin tires (143/141J) Bcsdpfx Aouu E Tieffju Axle brand: BPW ECO PLUS Brakes: drum brakes Suspension: hydraulic suspension Rear axle 1: Twin tires; lift axle; max. axle load: 12,000 kg; steered; tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axle 2: Twin tires; lift axle; max. axle load: 12,000 kg; tyre tread left inside: 100%; left outside: 100%; right inside: 100%; right outside: 100% Rear axles 3–8: Twin tires; max. axle load: 12,000 kg each; steered; tyre tread all positions: 100% Weights Unladen weight: 33,750 kg Payload: 100,250 kg Gross vehicle weight: 134,000 kg Functional Loading platform height: 105 cm Extendable body: Yes Condition General condition: very good Technical condition: very good Optical condition: very good Financial Information Price: on request Further information Please contact Stefan Schaapveld for more details...

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Bjdpfev Sw E Asx Affjcu Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: excellent (used), axle configuration: > 3 axles, loading space length: 17,320 mm, loading space width: 3,200 mm, loading space height: 400 mm, total length: 17,320 mm, total width: 3,200 mm, suspension: hydraulics, tire size: 245/70 R 17.5 | 143/131L (146/146F), color: beige, Year of construction: 2021, Colour: Yellow Loading capacity: 64,800 kg Main Features Manufacturer: Faymonville Model: GigaMax 1+4 / F-S45-2GXX Chassis number: YAFTL1009M0027562 Year of manufacture: 2021 Weights / Loading capacity King pin load: 25,000 kg Bjdpsvzaansfx Affocu Axle load: 12,000 kg Total axle load: 12,000 kg x 5 = 60,000 kg Gross vehicle weight (GVW): 84,200 kg Tare weight: 20,200 kg Payload capacity: 64,800 kg Axles Pendle axles Hydraulic suspension All axles with hydraulic steering WABCO braking system with EBS-E Tyres: 245/70 R 17.5 | 143/131L (146/146F) Dimensions Overall length: 17,320 mm Loading platform length: 6,800 mm 2x extension beams: 2,000 mm / 3,000 mm Loading platform width: 2,750 mm / 3,200 mm Loading platform height: 400 mm Ground clearance: 150 mm King pin height: +/- 1,340 mm Additional information: Gooseneck with integrated 1-axle pendle axle Hatz Diesel power pack Hydraulically operated gooseneck Aluminium side boards on gooseneck 2x extension beams: 2,000 mm / 3,000 mm Excavator trough Lashing rings Stainless steel toolbox Spare wheel + holder Rear bumper with lights King pin 3.5” Central greasing system with 2 BEKAMAX pumps = Further information = General information Year of construction: 2021 Axle configuration Tyre specification: 245/70 R 17.5 | 143/131L (146/146F) Suspension: hydraulic suspension Front axle: Twin tyres; lift axle; Max. axle load: 12,000 kg; steered Rear axle 1: Twin tyres; lift axle; Max. axle load: 12,000 kg; steered Rear axle 2: Twin tyres; lift axle; Max. axle load: 12,000 kg; steered Rear axle 3: Twin tyres; lift axle; Max. axle load: 12,000 kg; steered Rear axle 4: Twin tyres; lift axle; Max. axle load: 12,000 kg; steered Weights Unladen weight: 20,200 kg Payload: 64,800 kg Gross permissible weight: 85,000 kg Functionality Loading platform height: 40 cm Extendable body: Yes Condition Technical condition: very good Optical condition: very good Financial information Price: On request Further information Please contact Stefan Schaapveld for further details.