Used Müller Agricultural Machines for sale (250)

Condition: used, maximum load weight: 30,350 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 09/2007, loading space length: 9,800 mm, loading space width: 2,520 mm, total width: 2,550 mm, Total weight: 24,000 kg / 40,000 kg Unladen weight: 9,650 kg Payload: 14,350 kg / 30,350 kg Total length: 11,750 mm Loading length: 9,800 mm, offset approx. 2,400 mm, low bed with rear attachment approx. 7,400 mm. Width: 2,550 mm Loading height: 860 mm Gujdpjwlyx Rofx Af Rei Further information - Long, 2-part ramps with hydraulic operation - Excavator bucket rest - Twin tires 235/75 R17.5" - Wheel recesses - BPW axles - Large lashing package - Warning signs - 3 m widening - LED reversing lights - Total bulkhead 2,000 mm All further information at

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring) * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Air suspension * Drawbar height-adjustable by 300 mm - Drawbar extension by 250 mm to 2,250 mm * Jost support wind at the front * LED tail lights * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right outside the front wall * Side underride guard * Plastic quarter fenders * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and loading ramps Guodepk Dv Rspfx Af Rji * 50 mm softwood floor * Device in front of the front wall for retrofitting container locks * Bolted front wall of smooth sheet metal * Side walls made of steel sheet - trapezoidal profiled - foldable with drop side lift * Steel rear wall, insertable between the ramp mountings, when not in use stored inside in front of the front wall * Rear stakes bolted * Perforated outer frame approx. 45 degrees angled with 2 ton lashing capacity every 480 mm, installation of 3 ton drop lashing brackets every 600 mm possible, in each corner front and rear 1 x 6.3 ton lashing ring, various holes for 1.2 ton lashing option in the front and end crossmember * One-piece mechanical grating loading ramps with spring system for one-man operation approx. 2,750 x 600 mm (can be compressed up to 20 mm) * Rear approach angle approx. 860 mm * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Drop side color in RAL 9010 pure white * Painting of side walls in a RAL color for an additional charge possible * New vehicle with manufacturer's warranty * Errors and intermediate sale reserved * Immediately available from Egestorf

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Year of construction: 2025, Equipment: ABS, tail-lift, * Müller-Mitteltal KA-TA-R 11.9 Tandem Low-loader Three-way Tipper Trailer with Extension Side Walls + Aluminium Ramps * Inquiry number 11532 – available immediately * NEW VEHICLE in RAL 9016 traffic white * 5m x 2.42m x 0.5m + 0.5m steel extensions * 3 sides pendulum-mounted, painted, laser-welded side walls, swinging, foldable and removable, painted with spring lift and central locking (locking galvanized) * Two-step access in front of the front wall (galvanized) * Lockable compartment under the tipping platform for the loading ramps * Aluminum ramps, 8t pair, 3.57m long * 2 LED reverse lights at the rear * Chassis hot-dip galvanized * 4 UVV lashing rings LC 5000daN at front and rear + 8 lashing eyes LC 3000daN recessed and foldable in the tipper floor (centered) * Side marker lights with indicator function * Stepless height-adjustable drawbar, hot-dip galvanized, with 40mm towing eye * Wide tyres 385/55R 19.5 (set of 4), BPW axles, parabolic springs * LED lighting system for 12 and/or 24 V * Net hooks * EBS with tire pressure monitoring * We are Müller-Mitteltal authorized dealer * Leasing example from our partner MMV Leasing: EUR 560,- net per month over 60 months, with no down payment and "0" EUR final payment * Other terms with/without down payment or residual value possible Gujdpfx Aswnvt Ajf Roi Our Opening Hours: Monday–Thursday: 08:00 – 17:00 Friday: 08:00 – 15:00 Outside of these hours, visits are available by appointment. We speak German, English, Polish, and French. Whatsapp / Facetime Leasing, financing, and trade-in available.

Condition: used, Year of construction: 2020, TRACK GUIDE III 010 branded Müller electronics parallel driving and ISOBUS system 020 8" touch display 030 GNSS receiver AG-200 040 SN: 3130247701C04192 050 Camera connection 060 Cabling 070 Parallel driving system with parallel and contour mode, 080 Obstacle warning, area determination, distance, 090 Speed, 2D and 3D view Gusdpfewygtwjx Af Rsi 100 Activation: 110 ISOBUS-UT machine control 120 ISOBUS-TC Task Controller 130 / Task management 140 Section Control 150 Automatic section control 160 TRACK Leader parallel driving aid

Condition: used, maximum load weight: 13,470 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 7,075 mm, total width: 2,550 mm, total height: 1,150 mm, Year of construction: 2023, Equipment: ABS, Immediately available stock vehicle with daily registration in 07/2024 ABS, EBS-E, RSS, 2x 10 ton axles (Gigant), steel rims, tires 235/75 R17.5, drum brake, automatic slack adjuster, air suspension, lifting + lowering function, WABCO SmartBoard, weight detection / axle load display via EBS-Canbus signal for display on display in the driver's cab (truck must be prepared accordingly, no calibrated scale), release valve on the front axle, spring brake on the rear axle, two pairs of pneumatic container locks for roll-off containers, storage box made of galvanized sheet steel approx.: 1,000x300x600mm, storage box for container net approx.: 1,000x300x600mm, side protection device closed, underrun protection fixed, rear apron on the underrun protection, A-shield foldable, Ramp compartment including aluminum ramps (2,800 mm, long 470 mm wide, approx. 10,600 kg load capacity/pair), hot-dip galvanized chassis, modular lights, some LED, 2 additional LED reversing lights at the rear of the vehicle. La-Si package: 8 pieces of UVV fall lashing brackets (LC 8,000 daN) mounted to the existing hole pattern in the outer frame (protruding by the material thickness) ? Arrangement: 1 pair in front of the rear carrier / 3 pairs in the flat loading area, 1 pair of folding lashing eyes (LC 13,500 daN) on the front wall carrier, 3 pairs of folding lashing eyes (LC 10,000 daN) recessed in the outer frame, 8 interchangeable trough stops for lateral centering of the tipping troughs, 4 front trough stops plugged in with a swinging stop. Duomatic coupling head / 15-pin power supply Drawbar 2,100 mm plus 500 mm lowering device / 40 mm DIN towing eye Truck coupling height: approx. 780-980 mm Container length: 5,500 mm - 7,000 mm i.Li. or 2x 10 cbm ASK troughs or construction machine transport Height: approx. 950 mm with unloaded vehicle (centering edge 970 mm) 20,000 kg GG technically possible Hüffermann Krandienst GmbH: we trade, we rent, we repair. Roll-off trailers, roll-off tippers, garbage collection vehicles, mobile cranes and work platforms... Talk to us! Guodpfx Afougzqts Rei Do you need financing? We would be happy to provide you with a non-binding financing offer. The offer is subject to change, without warranty or guarantee. Subject to prior sale. A deposit of 10% of the purchase price is required for a reservation. Until the money is received, there is no reservation or claim to availability. The purchase is only finalized when payment is received. The vehicle remains the property of Hüffermann Krandienst GmbH until full payment is made. Payments are only accepted in euros at no additional cost to the seller and only by bank transfer or cash. No checks.

Condition: used, empty load weight: 3,450 kg, maximum load weight: 14,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, next inspection (TÜV): 07/2025, suspension: air, tire size: 235/75R17.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container lock, underride protection, side aluminum side guard, twin tires. Body: 2-axle outside-roller trailer for roll-off containers from 5.5 m to 7 m or 2 x 10 m³ skip containers; BPW axles, drum brakes, pneumatic locking, pneumatic drawbar lowering. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Godswypl Nopfx Af Reui

Condition: used, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 02/2017, next inspection (TÜV): 10/2025, Müller Mitteltal 3 axle low loader trailer with ramps type T3 Profi Total weight 24,000 / 30,000 kg Payload 17,940 / 23,940 kg Empty weight 6,060 kg Gsdpfxsv Hl Rij Af Rsui Total length 10,800 mm Loading length 8,300 mm / loading bed 6,500 mm Loading height 900 mm Parabolic suspension Wider extensions with warning signs Large lashing package Long ramps with spring jack Tool box Storage box in offset Vehicle is available immediately. Other 3 and 4 axle low loader trailers, new and used, available immediately More information at:

Condition: used, maximum load weight: 25,230 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 06/2012, Equipment: ABS, Müller Mitteltal 2-axle concrete semi-trailer type SF32 BM/BT Body type: HTM 1004 Liebherr 10 m³ from year of construction 2012, BPW axles, drum brakes, air suspension, lift axle, underride guard, EBS, ABS 1st hand inspection book Permissible total weight: 32000 KG Guodpfxsrdt H Eo Af Rei Unladen weight: 6770 KG

Condition: used, Year of construction: 2022, GPS RECEIVER A 101 Gjdpfx Asu Tx Rdsf Rjui (0010) DGPS / Glonass receiver AG-Star (0020) Removal/conversion of 2302216

Condition: new, maximum load weight: 14,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders * Disc brakes * Duomatic brake connection * 2 x 10 ton SAF axles * Air suspension with automatic lowering when the brake is uncoupled * Pull scissors 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & spindle * Plastic tool box on the right side, closed. Plastic fenders * closed side impact protection as advertising space * underrun protection with 2 impact buffers * foldable A-sign at the rear for waste disposal Gsdpel Tqkwjfx Af Rsui * LED tail lights with protective roof * 2 x 7-pin power plugs * hot-dip galvanized chassis (without air tank, axles, pull scissors, etc.) * roller track length approx. 6,950 mm * roller container is clamped by pneumatic 4-way claw locking * there are 2 plug-in container stops at the front with 2 additional plug-in positions * driving height unloaded approx. 1,165 mm * -- permissible total weight of 20,000 kg technically possible-- * suitable for 5,000 - 7,000 mm container lengths * new vehicle with manufacturer's warranty * errors and prior sale subject to reservation * available immediately from Egestorf

Condition: used, maximum load weight: 18,610 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 7,075 mm, total width: 2,550 mm, total height: 1,150 mm, Year of construction: 2023, Equipment: ABS, Immediately available stock vehicle with daily registration in 07/2024 ABS, EBS-E, RSS, 3x 9 ton axles (Gigant), steel rims, tires 235/75 R17.5, drum brake, automatic slack adjuster, air suspension, lifting + lowering function, 2nd axle as lifting axle, WABCO SmartBoard, weight detection / axle load display via EBS-Canbus signal for display on display in the driver's cab (truck must be prepared accordingly, no calibrated scale), release valve on the front axle, spring brake on the rear axle, two pairs of pneumatic container locks for roll-off containers, storage box made of galvanized sheet steel approx.: 1,000x300x600mm, storage box for container net approx.: 1,000x300x600mm, side protection device closed, underrun protection fixed, rear apron on the underrun protection, A-sign foldable, ramp compartment including aluminum ramps (2,800 mm, long 470 mm wide, approx. 10,600 kg load capacity/pair), hot-dip galvanized chassis, modular lights, some LED, 2 additional LED reversing lights at the rear of the vehicle. La-Si package: 8 pieces of UVV fall lashing brackets (LC 8,000 daN) mounted to the existing hole pattern in the outer frame (protruding by the material thickness) ? Arrangement: 1 pair in front of the rear carrier / 3 pairs in the flat loading area, 1 pair of foldable lashing eyes (LC 13,500 daN) on the front wall carrier, 3 pairs of foldable lashing eyes (LC 10,000 daN) recessed in the outer frame, 8 interchangeable trough stops for lateral centering of the tipping troughs, 4 front trough stops plugged in with a swinging stop. Duomatic coupling head / 15-pin power supply Draw fork 2,100 mm plus 500 mm lowering device / 40 mm DIN towing eye Gjdpfxeugzqyo Af Reui Truck coupling height: approx. 780-980 mm Container length: 5,500 mm - 7,000 mm i.Li. or 2x 10 cbm ASK troughs or construction machine transport Height: approx. 950 mm with unloaded vehicle (centering edge 970 mm) 27,000 kg GG technically possible multiple available!! Hüffermann Krandienst GmbH: we trade, we rent, we repair. Roll-off trailers, roll-off tippers, garbage collection vehicles, mobile cranes and work platforms... Talk to us! Do you need financing? We would be happy to provide you with a non-binding financing offer. The offer is subject to change, without warranty or guarantee. Subject to prior sale. A deposit of 10% of the purchase price is required for a reservation. No reservation or claim to availability exists until the money has been received. The purchase is only concluded when payment has been received. The vehicle remains the property of Hüffermann Krandienst GmbH until full payment has been made. Payments are only accepted in euros at no additional cost to the seller and only by bank transfer or cash. No checks.

Condition: used, maximum load weight: 13,060 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/1990, next inspection (TÜV): 03/2025, loading space length: 4,800 mm, loading space width: 2,300 mm, loading space height: 1,400 mm, total width: 2,500 mm, Vehicle number: 24554 Vehicle / Body: Tipper Gsdpfsviqm Uex Af Reui First registration: 07/90 HU: 03/25 Total weight: 18.000kg Unladen weight: 4,940kg Payload: 13,060kg Overall length: 7,150mm Loading length: approx. 4,800mm Width: 2,500mm Loading height: approx. 1,400mm Further information - Parabolic suspension - Steel drop sides approx. 900mm, foldable, split in the middle - Loading width approx. 2,300mm - LED reversing lights - SAF axles - 385/65 R22.5 tires

Condition: new, maximum load weight: 8,500 kg, overall weight: 11,990 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Equipment: ABS, * KA-TA-R 11.9 Masterline: * Front wall and floor hot-dip galvanized * Wabco ABS * Emergency release device for spring-loaded cylinder * Drum brakes, 2 x 7 to. Gigant axles * Parabolic springs with tandem compensation unit * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flanged drawbar eye * Jost mech. support winch at the front * 2 mechanical hot-dip galvanized folding supports at the rear * 15-pin power plug * Multi-chamber tail lights * hot-dip galvanized bolted underride guard Gujdpfx Afoq Hg D Hj Rsi * Tool box made of galvanized sheet steel on the right side * Plastic quarter mudguards * Hot-dip galvanized chassis * Steel Pal.- 3 side tipper body * Full-length side walls in white, top with inner tube reinforcement, can be folded down without center stanchions with dropside spring jack * Tailgate can be folded down and swivels via man. Central locking * Hot-dip galvanized bolted rear stanchions * 1 x 5 to. lashing ring in each corner Lashing ring in each corner and 4 x 3 to. lashing rings embedded in the outer frame * 4 mm sheet metal floor made of fine-grained steel * Net hooks * Mounting rail at the rear for the feeder ramps * Steel attachments inserted 500 mm high 3 sides swinging * Reinforced body with load securing certificate to EN 12642 XL * 1 pair of aluminum docking ramps approx. 3,570 x 400 mm (load capacity 8 to. / pair) suitable for rubber-tyred and tracked vehicles * Lockable storage compartment underneath the loading area recessed into the chassis from the rear * Axles, springs, air reservoir and support winch painted black * Tires 285/70 R 19.5 * Side wall paint in 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available for immediate delivery from Egestorf on the A7

Condition: used, maximum load weight: 14,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2013, loading space length: 6,800 mm, total width: 2,550 mm, total height: 1,400 mm, Year of construction: 2013, Equipment: ABS, ABS, EBS, automatic slack adjusters, 2x 10 to. axles (BPW), air suspension, drum brake, spring-loaded brake on the rear axle, pneumatically lowerable drawbar, release valve on the front axle, ratchet tensioner, hydraulic side clamp, closed storage box, two reversing lights, net box, spare wheel holder, closed side underride guard, fixed rear underride guard, rear skirt on the underride guard, folding A-plate, container size 2x10 cbm ASK skip. Hüffermann Krandienst GmbH: we trade, we rent, we repair. Roll-off trailers, roll-off tippers, refuse collection vehicles, mobile cranes and working platforms... Talk to us! Would you like financing? We will be happy to provide you with a non-binding financing offer. Guedouzdm Aspfx Af Rei The offer is subject to change, without guarantee or warranty. Subject to prior sale. A deposit of 10% of the purchase price is required for a reservation. There is no reservation or entitlement to availability until payment has been received. The purchase is only concluded upon receipt of payment. The vehicle remains the property of Hüffermann Krandienst GmbH until full payment has been received. Payments are only accepted in euros without additional costs for the seller and only by bank transfer or cash payment. No checks.

Condition: used, maximum load weight: 26,600 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2004, next inspection (TÜV): 08/2025, loading space length: 12,600 mm, loading space width: 2,500 mm, loading space height: 900 mm, total width: 2,520 mm, Müller Mitteltal 3 axle semi-trailer low loader Total weight: 35,000kg technically 41,000 kg Gjdpfx Aewtlkhjf Rsui Empty weight: 8,400kg Payload: 26,600kg technically 32,600 kg Total length: 13,700mm Loading length: total 12,600mm, gooseneck approx. 2,700mm/ roller slope approx. 1,400mm/ low bed approx. 8,500mm Width: 2,520mm Loading height: approx. 900mm Further information - Side walls gooseneck foldable - Tool box at the front 600mm - Spare wheel bulkhead - Last axle with caster steering - Air suspension - Split long ramps (2,300mm + 1,500mm), hydraulic. Side shift - BPW axles - Warning signs front + rear - Roller slope/gooseneck slope Other new and used low loader semi-trailers available. More information at

Condition: new, maximum load weight: 14,680 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2025, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinder * Disc brakes * 2 x 11 t Sauer axles * Air suspension (automatic lowering when the brake is uncoupled) * Tow bar approx. 2,300 mm long with 40mm towing eye and height adjustment via spring & turnbuckle * Plastic toolbox 450 x 470 mm, right side * Side net box 1,000 x 500 x 5000 mm * Closed plastic fenders FA & RA * Closed side underride protection as advertising space Gedpjv Nulzefx Af Reui * Rear underride guard * Plastic bumper buffer, rear * Hazardous material sign, rear * 15-pin power connector * LED taillights * Track length approx. 6,830 mm * Pneumatic 4-way clamp lock * Mechanically adjustable stops (2 positions) front left and right on the tracks * 265/70 R 19.5 twin tires * 3,220 kg unladen weight * --Permitted total weight of 20,000 kg technically possible-- * Approx. 1,130 mm driving height loaded * Suitable for 5,500 – 7,000 mm container lengths * Hot-dip galvanized chassis * Air tank, axles, slewing ring and tow bar * New vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 8,850 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 "Masterline": * Hot-dip galvanized floor and bulkhead * EBS braking system * Emergency release device for spring-loaded cylinders * Tire pressure monitoring system * Drum brakes * 2 x 5.5 ton BPW axles * Parabolic springs with tandem compensating unit * 300 mm height-adjustable drawbar with 40 mm flange drawbar eye * Jost mechanical landing gear at the front * 2 mechanical landing gears at the rear Hot-dip galvanized folding supports * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * 15-pin power connector * LED lighting * Bolted underride protection * Plastic quarter fender * Net hooks on the sides and rear in the central locking bearings, as well as two on the front wall * Steel pallet 3-way tipping body (continuous side walls - without center stanchions - foldable with side wall spring lifter) * Bolted rear stanchions Godpol Thyxefx Af Reui * Combination steel wing doors, rear wall with two asymmetrical wings, divided by 270°, pivoting and locking, not foldable, and with additional pendulum frames for automatic rear wall opening during tipping. Locking via galvanized espagnolette and central locking * Deactivation function for automatic rear wall function when tipping backwards with the wing door open * 1 x 5 ton lashing ring in each corner and on the sides 4 x 3-ton lashing eyes embedded in the outer frame, 4 mm sheet steel floor, rear mounting rail for the landing ramps * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum landing ramps approx. 3,310 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles * Rear-lockable storage compartment embedded in the chassis below the loading area * Front wall, tipping platform, rear stanchions, underrun protection, mechanical Hot-dip galvanized drop legs * Side walls and tailgate painted in RAL 9010 pure white * Side walls can be painted in a RAL color for an additional charge * Axles, springs, flanged towing eye, air chamber, and landing gear painted in a black color * New vehicle, not registered, with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf on the A7

Condition: new, maximum load weight: 12,080 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, Year of construction: 2022, Equipment: ABS, * ETM-TA 14.4: * Wabco ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 7 tonnes. Gigant axles * Parabolic springs with tandem compensation unit Gujdpsl Th Eyjfx Af Rji * Height-adjustable drawbar (+/- 150 mm) with 40 mm screw drawbar eye * Jost support winch at the front, side impact protection * Foldable A-plate at the rear * 15-pin power plug, multi-chamber tail lights * Fixed steel front and side walls * Plug-in steel rear wall * Floor made of 50 mm softwood * 1 sliding plate support 750 x 1,000 mm in the front area including 2 trough stops at the front that can be plugged into 2 positions * 4 reversible trough stops that can be plugged into 2 positions for laterally centering the troughs * 1 x (13.5 ton) UVV lashing ring on each side for hanging tensioning elements * 2 ratchet tensioners (spindle adjustment) with compensation chain and quick shortener (tension force 6,300 kg) * Rear cross member for attaching aluminum ramps including 2 additional rear fall supports * Loading edge unloaded approx. 710 mm * Chassis, bulkhead, side walls, fender, drawbar, rear fall supports hot-dip galvanized * the axles, springs, support winch, air tank painted in a black tone * Tires: 285/70R19.5, wheelbase: 1,140 mm * Loading edge unloaded: approx. 710 mm, sold without container * Color hot-dip galvanized * Vehicle has a daily registration in 06/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer warranty * Errors and prior sale subject to reservation * available immediately from Egestorf on the A7

Condition: new, maximum load weight: 16,000 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2024, * KA-TA-RT 21.0 ML: * Without ABS / EBS with 40 km/h approval * Spring-loaded parking brake, drum brakes * Gigant axles * Tandem balancing unit with 100 mm wide parabolic springs * Support winch at the front * mech. Fall supports at the rear * firmly welded drawbar with low-maintenance cap for K80 ball head coupling (can be adjusted by + 77 mm / 33 mm via head plate) with raised boom for the connecting cables * 12 V 7 + 4-pin power cable * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle side * Side marker lights with indicator control * Plastic quarter fender * Plastic tool box approx. 750 x 350 x 300 mm on the right side * Chassis made of fine-grain steel * Steel pallet 3-way tipping structure with M-Strong side walls (front wall fixed, continuous side walls - without center stanchions - swinging via manual central locking and mechanically foldable with side wall spring lifter * hydraulic rear wall 500 mm high as hydr. chute and a 115° opening angle * 4 mm Hardox 450 steel floor * 1 x 7 tonne lashing eyes in each corner and 4 x 3 tonne lashing eyes on each side - recessed and foldable * Hot-dip galvanised two-step ladder in front of the front wall in FR left) * 1 pair of aluminium landing ramps (10 tonne / pair with axle distance over 2,500 mm) 3,570 x 410 x 120 mm suitable for rubber-tired and tracked vehicles * 2 mounting slots for aluminum docking ramps embedded in the chassis from the rear Load securing in accordance with EN 12642 XL * --Coupling height loaded approx. 530 mm * unloaded approx. 590 mm-- * Body paint in RAL 9010 pure white * Chassis, drawbar, rear drop supports, underrun protection hot-dip galvanized * Axles, air tank, support winch at the front * K80 coupling painted in a black tone Gedpfsr Dpzuex Af Reui * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 11.9: * Loading area 6.27 m * Suitable for container transport * RDÜ tire pressure monitoring * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 tonnes. BPW axles * Parabolic springs with compensating unit * Drawbar height adjustable by 300 mm * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic quarter fenders * LED lighting * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stanchions, and loading ramps * 50 mm softwood floor * Device for retrofitting container locks in front of the bulkhead * Bolted smooth sheet metal bulkhead * Foldable trapezoidal steel side walls with side wall spring lifter * Steel rear wall can be inserted between the ramp brackets when not in use, inside the bulkhead * Bolted rear stanchions * Perforated outer frame, angled at approximately 45 degrees with a 2-ton lashing capacity every 480 mm * Installation of 3-ton Drop lashing rings available every 600 mm Godpfx Aervvfwsf Reui * 1 x 6.3 ton lashing ring in each of the front and rear corners * Various holes in the front and end beams for 1.2 ton lashing options * One-piece mechanical loading ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be collapsed to within 20 mm) * Rear approach slope approx. 860 mm * Wheelbase: 990 mm * Tires: 235/75R17.5 * Side walls painted in RAL 9010 pure white * Side walls painted in a RAL color available for an additional charge * Plastic toolbox * Subject to errors and prior sale * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * TPMS (Tire Pressure Monitoring System) * 3 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Center axle liftable * Pneumatically lowerable drawbar, 2,100 mm long, with 50 mm towing eye and height adjustment device * Tool box made of powder-coated steel sheet and spare wheel holder in basket design on the right side * Contour marking tape on sides and rear, reflective * Side underride protection * Plastic quarter mudguards with splash protection * Plastic rear impact protection buffers * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with wheel recesses in the bogie area * For roll-off container transport, container lengths from 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanically pluggable front stop angles in the track * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ capacity possible * Includes 8 repositionable skip stops for lateral centering of containers, the front 4 skip stops are pluggable with swiveling stops * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and frictional securing of the skips * 4 cloverleaf lashing rails on each side and 1 pair of 13.4 t UVV lashing rings to the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld seam anti-slip coating in the running area of the drive-on slope * Mechanical drop-down support legs at the rear * 1 pair of aluminum drive-on ramps (16 t/pair), 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) * Tires: 235/75 R17.5 * Loaded ride height approx. 1003 mm * Payload: 18,900 kg * Technically permissible gross weight: 27,000 kg * Axles, slewing ring, drawbar, and air tanks painted in black * New vehicle without first registration, comes with manufacturer’s warranty Guedpfxotplv Tj Af Rsi * Errors and prior sale excepted * Available from week 50/2025

Condition: new, maximum load weight: 10,500 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension with lift and lowering system * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display capability in the truck via EBS signal – no truck-side installation required * 15-pin power connector * LED lighting * Front landing gear * Rear folding support legs, externally mounted * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Provisions in front of the bulkhead and at the rear for retrofitting 20" container locks * Bolted bulkhead made of smooth sheet metal * Side walls made of trapezoid-profiled steel sheet, foldable, center-divided (1x) * Rear wall made of steel, insertable between the ramps, storage bracket for non-use inside in front of the bulkhead * Rear stanchions bolted * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing shackles possible every 600 mm – 4 lashing rings installed per side * One 6.3 t lashing ring in each front and rear corner * Various holes for 1.2 t lashing options in the bulkhead and end crossmember * One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) Gusdpfxjl Th Dfo Af Rei * Rear approach slope approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding support legs, and ramps hot-dip galvanized * Axles, springs, air tanks, flange eye, and landing gear painted black * Side wall color freely selectable up to approx. 2 weeks before production date; no metallic or special colors allowed * --reinforced and certified body according to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available in Egestorf

Condition: new, maximum load weight: 14,660 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs - 110 mm wide - with tandem compensation unit Gujdpfx Ael Th Hlsf Rei * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at the front * Fold-out support legs at the rear * Side underrun protection * Plastic quarter mudguards * 15-pin electrical plug * LED tail lights * 50 mm softwood flooring * Preparation in front of the front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet metal * Side walls made of trapezoidal-profile steel sheet, foldable, with drop-side spring-assisted lifter * Steel rear wall, retractable between the ramps - holder for unused wall inside at the front wall * Bolted rear side stanchions * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Installation of 3 t flush lashing rings possible every 600 mm * In each corner at the front and rear, 1 x 10 t lashing ring; various holes for 1.2 t lashing options in the front and rear bulkheads * One-piece mechanical grating access ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be retracted to 20 mm) * Rear approach ramp approx. 860 mm * Chassis, drawbar, front wall, rear wall, access ramps, and folding supports hot-dip galvanized * Paint finish of the drop sides in RAL 9010 pure white * Paint finish of the side walls in any RAL color available at extra cost * Axles, springs, air tanks, drawbar eye, and landing gear painted in black shade * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: new, maximum load weight: 8,800 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 11.9: * Loading platform 5.37 m * RDÜ (Tire Pressure Monitoring System - TPMS) * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with equalizer assembly * Height-adjustable drawbar, adjustable by 300 mm * Jost landing gear at the front * External folding support legs at the rear * Plastic toolbox mounted front right on the bulkhead * Side underrun protection Gusdpfol Th Ncsx Af Rsi * LED lighting * Plastic quarter mudguards * 50 mm softwood floor * Bolt-on bulkhead made of smooth sheet metal * Side walls made of trapezoidal-profiled steel, foldable with drop-side spring assist * Rear wall made of steel, can be stored between ramp holders at the front of the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, bent approx. 45 degrees, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing rings possible every 600 mm * One 6.3 t lashing ring in each of the front and rear corners * Various 1.2 t lashing points in the front and rear cross members * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approach angle at rear approx. 860 mm chassis * Drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted black * Wheelbase: 990 mm * Tires 235/75R17.5 * Drop sides painted in RAL2011 deep orange * Side wall painting in any RAL color available at extra cost * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Condition: new, maximum load weight: 37,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Year of construction: 2024, * TS 3 RM 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11-ton BPW axles * Air suspension with lifting and lowering system and RtR valve * Last axle as self-steering axle with electro-pneumatic steering lock * Side impact protection * Landing gear at the front and swivel supports at the rear of the chassis * 15-pin power connector * LED taillights * Mechanical Adjustable warning sign packages at the front and rear Gjdpfx Afel Tiiys Rsui * Rotating beacon (removable) at the rear left * Straight sheet steel fenders * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Trailer platform with 45° beveled front corners and a toolbox at the front made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with a hinged lid * 400 mm aluminum side walls (RAL 9010) on the sides of the trailer platform, foldable and removable * Rear wall -150 mm- high * Rear slope on the trailer platform to the low bed, approx. 700 mm long, each with one recessed lashing ring * Trailer platform with 50 mm clamped wooden planks and low-loading platform with 60 mm clamped wooden planks * Teardrop plate above the axles * 9 mechanical folding extensions to 3 m Total width, but not including the rear slope (extension planks present with closed storage compartment perpendicular to the direction of travel under the loading area) * 2 lashing bars embedded in the outer frame of the semi-trailer platform on each side, 3 lashing rings on each side in the low-loader platform, and an additional 1 lashing ring in the center of the rear end beam, 2 x 5 ton lashing rings screwed to the bottom of the outer frame of the wheel wells on each side, * 2 x 6.4 ton lashing rings on each side. UVV lashing rings in the excavator boom rest * Excavator boom rest from the end of the last rigid axle over the steering axle to the end support, continuous with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm * Two wheel recesses on each side, 390 mm deep and 640 mm wide, with retractable covers for transporting wheel loaders with a wheelbase of 3,120 - 3,620 mm, front recess at the bottom, slanted upwards by 1,100 mm to a length of 2,050 mm, rear recess at the bottom, slanted upwards by 580 mm to a length of 1,550 mm * Hydraulic. Folding ramp with extendable tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic lateral ramp adjustment. * The outer board on the ramp is made of 50 mm hardwood. * Loading area above the turntable: approx. 3,950 x 2,480 mm. * Loading height (unloaded): approx. 1,470 mm. * Lower loading area: approx. 8,500 x 2,520 mm. * Loading height (unloaded): approx. 910 mm (including 860 mm approach slope). * Chassis, folding supports at the rear, loading ramps, mechanical. Hot-dip galvanized folding extensions * -- Axles, springs, and air chambers painted in a single black tone -- * Suitable for 2- and 3-axle tractors * Fifth wheel height: approx. 1,220 mm * Tires 235/75R17.5 * Gross vehicle weight of 48,000 kg technically possible * Vehicle is hot-dip galvanized * Side walls painted in RAL 9010 pure white * Side walls painted in a RAL color available for an additional charge * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf