Used Mulag Farm Mowers / Agricultural Mowers for sale (4)

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation Chsdpfxs Abkhpo Aixod * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, mileage: 1 km, first registration: 03/2023, driver cabin: other, gearing type: other, Year of construction: 2023, Additional Equipment/Features: * Boom swing range: 190 degrees – hydraulic collision protection with dampened boom system via hydraulic accumulator * Boom float control mltronic: computer-assisted pressure control of the mowing head via displacement sensor. Several functions can be preselected for activation. Switchable to boom float control type AER (only in conjunction with universal mowing head UMK 1200 (A1013), flail mower head MK 1200 (A1026), MK 1200 plus (A1126), MK 1600 (A1083), touch mowing head TMK 1200 (A1028), or shrub mowing head GMK 1200 (A1106)). NOTE: one mltronic displacement sensor kit (Order no. A1086) required per mltronic-compatible mowing head. * Combination mowing unit MKM 700, consisting of front-mounted boom mower FME 600 and verge mower MRK 350 * Right- and left-side operation – reach 6.70 m from vehicle center in combination mode – reach 7.20 m solo operation * SAFETY STOP: Electric engagement/disengagement of the knife shaft from the control unit, including brake valve (run-down time for the knife shaft is limited to approx. 4 seconds) * Quick-change device for attachments Cedoy Nxnxspfx Aixehd * Float position for attachments, switchable on/off * Hydraulic transverse adjustment of the boom by 850 mm in combination mode or 1300 mm in solo mode * Proportional control mlcontrol: permanent hydraulic proportional control (CAN bus technology) of the boom, incl. dual-cylinder actuation (multiple functions can be performed simultaneously) – operator information system with TFT color display, incl. system control and diagnostic support – stepless pressure adjustment for AER float control via potentiometer, switchable on/off * Hydraulic parking stands – 2 units, height adjustable * Oil cooling system – individual price or total price with electronic temperature monitoring * Multifunction joystick mlpilot – 6 proportional functions on one level – 6 push buttons – adjustable palm rest * Combination control unit: control of both machines (MFK500 + MRF350/FME600 + MRK300 or rear boom MHU / MHS / SB + front mower MRM / MRS / MRK / MFK / FME) via multifunction joystick (possible only if both MRS/MRM/MRK/MRF/MFK/FME and MHU/MHS/SB are newly acquired or already electrically pre-equipped) (boom + verge mower: only in conjunction with order no. S1428 / S1831 or S1327) (boom + boom: only with order no. S1327) * Implement drive: front PTO – hydraulic pump for 1st implement 62 l / 340 bar, hydraulic pump for 2nd implement 50 l / 280 bar * Paint finish Orange RAL 2011 * Left-side drive Miscellaneous: * Trade-in and purchase of vehicles and machinery possible * Sale price excluding transport and delivery * No liability for printing and typographical errors * Subject to errors, changes, and prior sale * Offer non-binding * Photos may differ. Price applies to current condition * All information without guarantee.

Condition: used, empty load weight: 2,800 kg, maximum load weight: 5,200 kg, overall weight: 8,000 kg, first registration: 09/2003, total width: 2,550 mm, Key Features Internal Reference: 24199M Chassis Number: W09 004 208 3GS 520 07 Serial Number: 310.926.577 Vehicle Model: MHT 800 / Swiss-Vehicle Vehicle Brand: Mulag Product Category: Dump Trailer Condition: Used Date of First Registration: 29.09.2003 Last Periodic Technical Inspection (PTI) or TÜV: 19.06.2023 Suspension: Steel-Steel Axles & Tires Axle 1: 285 / 70 R 19.5/8mm, Drum brakes, Leaf spring suspension Axle 2: 285 / 70 R 19.5/10mm, Disc brakes, Leaf spring suspension Number of Axles: 2 Chsdpfx Aez Hpynjixjd Weights & Dimensions Gross Vehicle Weight (GVW): 8000 Payload: 5200 Unladen Weight: 2800 Vehicle Width: 2550 Body Body Manufacturer: MULAG Body Model: Box Body Year of Manufacture: 2003

Condition: used, Year of construction: 2021, We are offering a used Mulag combination mowing unit MKM 700, manufactured in 2021, consisting of: flail mower head MK 1200 Plus, verge mower MRK 300, and verge mower head RMK 1200. Without rear weight. Further details are available upon request. Location: 95326 Kulmbach. Chodpfxezkdmmj Aixod