Used Goldhofer Low Loader / Lowbed Trailers for sale (97)

Condition: used, overall weight: 54,000 kg, axle configuration: 3 axles, first registration: 06/2008, Equipment: ABS, Vehicle Identification Number: WG0STZV3580032220 First registration: 24.06.2008 German MOT due Unladen weight: 14,900 – 18,000 kg Detachable gooseneck King pin 3.5" ----Low-bed length: 7,800 mm – Loading height: approx. 470 mm TELESCOPIC up to 5,400 mm WIDTH-ADJUSTABLE Wheel recesses Chassis frame: 4,100 mm Excavator trough – dipperstick recess Central lubrication system BPW ECO axles with drum brakes, remote control 3 x hydraulically steered axles Axle loads 3 x 10,000 kg Detachable gooseneck – fifth wheel load: 24,000 kg Central lubrication system Tyres: 235/75 R 17.5 Nedpfx Amjxwf Tnjgjlb Changes, prior sale and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a warranty as defined by sales law. The binding description is that stated in the purchase contract. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide a quotation through our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: used, empty load weight: 15,000 kg, maximum load weight: 39,895 kg, overall weight: 54,895 kg, axle configuration: 3 axles, first registration: 10/1989, loading space length: 13,600 mm, loading space width: 2,750 mm, loading space height: 650 mm, total length: 2,750 mm, total width: 3,500 mm, suspension: air, tire size: 8.25R15, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 3-axle, BPW axles, air suspension, forced steering, lifting+lowering, lashing eyes, 2-section ramps, hydr. ramps Superstructure: hydr. liftable low bed, hydr. ramps Trailer was partially overhauled in 2009 for EUR 11,000: NEW FLOOR and much more, and was then no longer in use Widenable from 2750mm to 3250mm, loading length in drop deck=5850mm, loading length over axles=4250mm, loading height over gooseneck approx.: 1620 mm, over loading area approx.: 650 mm, over the axles approx.: 940 mm. 1/3 of the low bed can be raised hydraulically! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nljdpfx Aei Rqi Sjmgsb - .

Condition: used, empty load weight: 9,000 kg, maximum load weight: 25,500 kg, overall weight: 34,500 kg, axle configuration: 2 axles, first registration: 01/1977, loading space length: 8,250 mm, loading space width: 2,500 mm, loading space height: 900 mm, total length: 2,500 mm, total width: 1,750 mm, suspension: steel, tire size: 8.25 R 15/18 PR, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, BPW axles, leaf suspension, forced steering, access ramps can be attached Superstructure: Saddle height approx. 1,250 mm, both axles with forced steering, gooseneck 4,100 mm, turning dimension from corner/slope to kingpin center 1,800 mm, drum brakes ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nlsdei Rqwfopfx Amgob - .

Condition: used, maximum load weight: 120,000 kg, axle configuration: > 3 axles, first registration: 10/1993, Year of construction: 1993, Equipment: ABS, Manufacturer: GOLDHOFER Type: THP-SL Year of manufacture: 1993 / 2010 consisting of: - gooseneck with hydraulic unit (year of manufacture: 1993 - hydraulics: 2003) - 2-axle chassis module (year of manufacture: 2010) - 3-axle chassis module (year of manufacture: 1993) - 4-axle chassis module (year of manufacture: 1993) - excavator bed 5.8m rigid (year of manufacture: 2010 - payload 100 tons) - excavator bed 8m + 5m extendable (year of manufacture: 1993 - payload 120 tons) Available immediately. Subject to errors and prior sale. Nedpet Irxxjfx Amgelb

Condition: new, maximum load weight: 78,400 kg, overall weight: 98,000 kg, axle configuration: > 3 axles, total width: 2,750 mm, Year of construction: 2025, with air suspension, hydromechanical forced steering, single telescoping platform-type loading area, with 2-part loading ramps Unladen weight 21,100 kg Payload 76,900 kg Length = 14,050 mm STZ-L Gooseneck - 45° chamfered front corners (468 x 468 mm), closed outer frame - robust steel and welded construction - formed loading area 3,700 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) in low-profile design (construction height 235 mm) with adjustable guide elements - Turntable-mounted saddle plate with replaceable 3.5" kingpin and adjustable steering wedge - Fifth wheel load 26,000 kg - Steering radius 2,700 mm - Premium tool box Loading area - "Platform, single telescoping" design - Traffideck® polymer rubber surface - Loading area, single telescoping, designed as outer-inner tube construction - Extension stage locking via spring-loaded cylinders and locking bolts - Intermediate table 300 mm - Fixed support at front, 700 mm long Chassis Nedpfxjx Dqhks Amgolb - 6-axle air-suspended chassis, wheelbase 1,510 mm - Axle assembly from BPW, consisting of one fixed axle and five hydromechanically forced-steered stub axles with a maximum steering angle of 45° - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift and lower valve for lowering to a minimum of 785 mm or raising to a maximum of 985 mm (not for driving positions) - Chassis with open outer frame - Excavator trough at rear of chassis, 3,340 mm long and 874 mm wide Rear of vehicle - "Beveled 500 mm" design - Short 1,100 mm overhang from center of last axle - 2 integrated hydraulic supports for stabilizing the rear of the vehicle during loading operations 2-piece loading ramps with Super Grip surface - 2,600 + 1,200 x 720 mm - Upright hydraulic lifting unit with hand pump and cable extension - Hydraulic ramp adjustment Brake system - Dual-line full air brake system with diaphragm actuators - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring cylinders - ABV brake - Hydraulic connection - easyControl - Aluminum sideboards on 3 sides - Lift function (load-dependent) - Central lubrication system “BEKA-MAX” - Extendable widenings incl. infill planks, telescopically extendable up to 3,000 mm Technical Data Gooseneck Loading area (LxW) 3,700 x 2,480 mm Bevel: 1,080 mm Construction height above fifth wheel coupling 235 mm Fifth wheel height loaded 1,300 mm Steering radius rear 2,700 mm Steering radius front 1,350 mm Kingpin 3.5” Loading area Loading area (LxW) 11,000 x 2,750 mm telescoping by 4,340 mm in increments up to (LxW) 15,340 x 2,750 mm including rear bevel 500 mm Loading height (loaded) approx. 885 mm (+/-100 mm) or 845 mm (+140/-60 mm) Chassis Wheelbase 5 x 1,510 mm Overhang 1,100 mm Steering 1st axle: fixed 2nd – 6th axles: hydromechanical forced steering (dual-circuit system)

Condition: used, overall weight: 120,000 kg, axle configuration: > 3 axles, first registration: 07/1999, Goldhofer STHP-ET Gooseneck Main Features - Turntable-mounted fifth wheel plate, 3.5" kingpin, and adjustable steering wedge - Built-in hydromechanical double steering for attachment of pendle axles (2-circuit steering, 4 hydraulic cylinders) - Hydraulic lifting and lowering function, including support cylinders - Hydraulic differential lock - Designed loading area (approx. 3,700 x 2,440 mm) with chequer plate cover - Engineered for a technical fifth-wheel load up to 30 t - Steering radius of 2,800 mm for use with a 4-axle tractor unit - Coupling heights loaded: 1,350 mm - Aluminium side walls (400 mm high, on all 4 sides) Goldhofer Heavy-Duty Chassis Module Type THP/ET 3 - Load bed length 4,200 mm x 2,750 mm Nlsdpfjwuixfex Amgob - Load height 1,250 mm - Longitudinal and lateral combinable chassis module - Box-type central frame with integrated air and hydraulic oil tanks - Optimized bolt-lug coupling front and rear for longitudinal combinations - Two single-tired pendle axle units with a total of 4 wheels per axle line - Axle units mounted to the vehicle frame via turret bearings - Hydraulic axle compensation +/- mm, hydropneumatic gas spring suspension, and hose rupture safety valves on all axle units - Integrated hydromechanical 2-circuit all-wheel forced steering in the chassis with maximum steering angle of the axle units at 60° - 2-line all-wheel air brake and spring-actuated parking brake - Hydraulic locking pins - Unladen weight approx. 8,000 kg - BPW axles Technical Data Technical axle load per axle line: - at 5 km/h: 23,000 kg - at 50 km/h: 14,100 kg - at 80 km/h: 12,600 kg Goldhofer THP-ET Vessel Bridge – 75 t Payload Hydraulically extendable vessel bridge, 75,000 kg payload Base width 2,990 mm, hydraulically expandable to 4,640 mm Total vessel bridge length 9,900 mm Internal bridge length approx. 7,500 mm Technically extendable by approx. 5,500 mm Main Beam Dimensions Length: 7,500 mm + 5,500 mm Build height: 500 mm, Width bottom: 470 mm, Width top: 320 mm Goldhofer Heavy-Duty Chassis Module Type THP/ET 5 - Load bed length 7,000 mm x 2,750 mm - Load height 1,250 mm - Longitudinal and lateral combinable chassis module - Box-type central frame with integrated air and hydraulic oil tanks - Optimized bolt-lug coupling front and rear for longitudinal combinations - Two single-tired pendle axle units with a total of 4 wheels per axle line - Axle units mounted to the vehicle frame via turret bearings - Hydraulic axle compensation +/- mm, hydropneumatic gas spring suspension, and hose rupture safety valves on all axle units - Integrated hydromechanical 2-circuit all-wheel forced steering in the chassis with maximum steering angle of the axle units at 60° - 2-line all-wheel air brake and spring-actuated parking brake - Hydraulic locking pins - Unladen weight approx. 13,000 kg - BPW axles Technical Data Technical axle load per axle line: - at 5 km/h: 23,000 kg - at 50 km/h: 14,100 kg - at 80 km/h: 12,600 kg

Condition: used, maximum load weight: 24,000 kg, overall weight: 34,500 kg, axle configuration: 2 axles, first registration: 03/1988, next inspection (TÜV): 06/2026, Gooseneck Length: 3350 mm Width: 2,490 mm Steering radius: 2300 mm Fifth wheel load: 14,500 kg Fifth wheel height: 1,300 mm Low bed Loading platform length: 4,660 mm incl. 400 mm chamfer Width: 2,500 mm Extendable to 3,000 mm Loading height: 650 mm Chassis Loaded platform height: 900 mm Length: 3,000 mm incl. 800 mm chamfer Width: 2,500 mm Chamfer: 800 mm Rear hydraulic support Njdpfx Aoxc Dbhomgelb 2-part hydraulic ramps Length 1: 2,500 mm Length 2: 1,100 mm Width: 720 mm Fifth wheel load: 14,500 kg Rear axle load: 2 x 10,000 kg Gross weight: 34,500 kg Payload: 24,000 kg Kerb weight: 10,500 kg

Condition: new, maximum load weight: 74,600 kg, overall weight: 98,000 kg, axle configuration: > 3 axles, Year of construction: 2025, With hydraulic suspension, 12 t MPA axles, hydromechanical forced steering, double telescopic platform-type loading area Own weight 23,400 kg Payload 74,600 kg W = 14,650 mm - 31,000 mm STZ-L gooseneck - Hydraulic lifting/lowering function, lift +295 mm / -295 mm - Front corners chamfered at 45° (468 x 468 mm), closed outer frame - Robust steel and welded construction - Designed loading area 3,750 x 2,480 mm - Hydromechanical forced steering (dual-circuit steering) in a flat design (overall height 235 mm) with adjustable guide elements - Ball-bearing fifth wheel plate with replaceable 3.5" kingpin and adjustable steering wedge - Fifth wheel load 26,000 kg -Steering radius 2,800 mm -Comfort storage box Loading area - "Platform, double telescopic" design -Traffidecko polymer rubber flooring - Single telescopic loading area, designed as an outer-inner tube construction - Extension steps locked by spring-loaded cylinders and connecting bolts - Fixed front support 700 mm long Chassis - Hydraulically sprung 6-axle chassis, MPA Mac Pherson axle technology, wheelbase 1,510 mm - BPW axle assembly, consisting of one unsteered axle and six hydromechanically forced-steer steering knuckle axles with a maximum steering angle of 60° - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Ride height 885 mm +250 mm/-100 mm - Chassis with open Outer Frame Rear of Vehicle - 500mm tapered design - 2 integrated mechanical outriggers to support the rear of the vehicle during loading Braking System - Dual-line all-wheel drive air brake system with diaphragm brake cylinders Nlodpfx Ajwcy Sromgeb - Automatic load-sensing brake (ALB) - Automatic slack adjuster (AGS) - Parking brake via spring-loaded cylinders - Anti-lock brake - Hydraulic connection - EasyControl - Aluminum side walls, 3-sided - Lifting option for 2 axles - Central lubrication system "BEKA-MAX" - Electric unit - Extendable extensions including inlay boards, telescopic extension up to 3,390 mm Technical Specifications Gooseneck Loading area (LxW) 3,750 x 2,480 mm Height over fifth wheel coupling 235 mm Fifth wheel height when loaded 1.25 mm Rearward steering radius 2,800 mm Forward steering radius 1,280 mm King pin 3.5" Loading area Loading area (L x W) 11,300 x 2,750 mm Telescopic by 8,250 mm + 8,100 mm Incrementally to (L x W) 27,650 mm x 2,750 mm Incl. 500 mm rear bevel Loading height when loaded approx. 885 mm Chassis Wheelbase 5 x 1,5100 mm Overhang 1,100 mm Steering 1st - 6th axles hydromechanically forced steered (dual-circuit steering)

Condition: used, empty load weight: 10,900 kg, maximum load weight: 43,600 kg, overall weight: 54,500 kg, axle configuration: > 3 axles, first registration: 04/2025, loading space length: 8,700 mm, loading space width: 2,550 mm, loading space height: 855 mm, tire size: 245/70 r17.5, color: grey, Year of construction: 2025, operation weight: 10,900 kg, Equipment: ABS, Gooseneck, rigid, in center tube design: -closed outer frame with cut-outs for lashing straps (LC 1,500 daN) -steel floor covering with anti-slip coating -including perforated strip for aluminum docking lights -2" kingpin -Mechanically operated BPW seat posts -550 mm long, 8' chamfer at the gooseneck end -Front wall incl. parking position for rear wall, 400 mm high -Spare wheel holder mounted upright on the front of the gooseneck Nsdpfoi Ai E Rox Amgslb -3 pairs of LC 5,000 daN lashing rings recessed in the loading area of the gooseneck -Aluminium plug-in drop sides 400 mm high, consisting of 2x drop sides, side length 3,150 mm and rear drop sides with stanchions (galvanized) -Rectangular storage box, aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, center -Storage box 45', aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, left -Storage box 45', aluminum, hinged lid, lockable Dimensions approx. 400 x 800 mm, right Loading area, easily telescopic: -closed outer frame with cut-outs for tension belts (LC 1,500 daN) -Fixed part at the front 700 mm Sheet metal floor covering with anti-slip coating -Angled interface between fixed section and loading area for attaching bridging rails and wheel recesses -Excavator trough incl. slotted holes for load securing (LC 1,500 daN), length approx. 3,850 mm -Preparation for hydraulic ramp (electrical supply) -spars for widening to 3,000 mm -Sloping vehicle rear 8°, 550 mm long -Carriage design for easy attachment and removal of ramps -Continuous mud flap at the rear -1 pair of LC 10,000 daN lashing points in the middle of the cargo bed behind the gooseneck -7 pairs of LC 10,000 daN lashing points in the outer frame of the cargo bed -6 pairs of stanchion pockets 100 x 50 mm in the outer frame of the cargo bed -1 pair of LC 10,000 daN lashing points in the center of the rear area of the cargo bed -1 pair of stanchion pocket strips approx. in the middle of the cargo bed -1 pair of stanchion pocket rails on the fixed part -1 pair of stanchion pocket rails behind the last axle Ramps: -Hydraulic double folding ramps, 2,750+1,500x800 mm -Wooden decking larch -Control via remote control (possible via cable and radio) -Ramps with quick-change (disassembly) system Chassis: -axle make BPW ECO Max -2 ride heights -4 axles 10 t each (technically 12 t) -Twin tires 245/70 R17.5 -2 x rigid axle and 2 x friction-steered axle -Reverse steering lock on the friction-steered axle via reverse gear -Knorr brake system (in accordance with EU regulations with EBS-E) -TIM G2 from Knorr (trailer information module) -RSS (Roll Stability Support) driving stability control Load-dependent lift axle on the first axle incl. start-up aid (forced lowering of the lift axle possible via TIM) Accessories: -4 wheel chocks with holder 2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and plug-in position for rotating beacon, infinitely adjustable up to 3,950 mm -Fastening options on the gooseneck and on the loading area (alternatively on the ramp, if available) are included -pluggable bulkhead plate at the end of the excavator trough -Electro-hydraulic unit for ramp operation -Ramp operation via radio remote control -Hydraulic relief supports at the rear of the vehicle for support during the loading process -1 Pair of additional reversing lights rear switched to reverse gear -Wooden widening planks - larch (optional)

Condition: new, empty load weight: 27,000 kg, maximum load weight: 72,500 kg, overall weight: 99,500 kg, axle configuration: > 3 axles, loading space length: 5,500 mm, loading space width: 2,750 mm, loading space height: 550 mm, suspension: other, tire size: 245/70 r 17,5, color: grey, Equipment: ABS, Gooseneck, removable: Loading area 3,750 mm x 2,480 mm Technical fifth wheel load up to max. 30,000 kg hydro-mechanical steering hydraulic lifting and lowering function 2 support cylinders Operating elements for hydr. functions Direction of travel left Access ladder to the gooseneck Hydr. claw lock for bridge or chassis Multifunctional quick coupling Lighting for the operating elements of the gooseneck under the folding protection cover 3.5" kingpin 2-axle running gear at the front: 4 wheels per axle line, self-aligning axle units with ball bearing slewing ring bearings Axle make: Gigant Chassis width 2,750 mm / wheelbase 1,510 mm Hydr. axle compensation, stroke 600 mm Ride height: 1,145 mm +340 mm/-260 mm Sheet metal floor covering Brake system 2-axle chassis front: Drum all-wheel air brake system Automatic load-dependent brake (ALB) (AGS) Parking brake by means of spring-loaded cylinders EBS / ABS (electronic braking system) Socket for EBS on the front of the gooseneck Duomatic coupling for brake connection between chassis and cargo bed Excavator bridge 5,500 mm to 10,000 mm: Box-shaped inner/outer tube Overall height of the outer tube 400 mm Loading height 550 mm, ground clearance 150 mm Preparation of the outer tube for attaching folding extensions Rear 4-axle chassis: 4 wheels per axle line, self-aligning axle units with ball bearing slewing ring bearings Axle make: Gigant Chassis width 2,750 mm / wheelbase 1,510 mm Hydr. axle compensation, stroke 600 mm Ride height: 1,100 mm +385 mm/-215 mm Sheet metal floor covering Combined excavator skip Rear 4-axle chassis brake system: Drum brake with automatic load-dependent brake (ALB) (AGS) Dual-line all-wheel air brake system Parking brake by means of spring-loaded cylinders EBS / ABS (electronic braking system) Vehicle rear: Standard 90° design, 580 mm overhang from the center of the last axle Without ramp attachment to the end cross member Hydraulics: Hydraulic connection for SZM (1 set), connections for tractor (without lines), pump in the SZM with maximum flow rate of 60 l/min, additional flow divider for tractor flow rate of up to 120 l/min. Nedpfx Ashlz Rnomgjlb 6-way block tap in the gooseneck, for depressurizing the gooseneck linkage Hydraulic unit with Hatz diesel engine 10 kW, noise-reduced, hydraulic pump output 12 l/min, incl. electric starter and manual throttle adjustment, on the side of the gooseneck, standard paint finish in DB7350 nova gray, weight approx. 460 kg Accessories included: Spare wheel holder on the loading area of the gooseneck with one spare wheel fitted 2 pairs of wheel chocks Aluminum drop sides, closed on 3 sides (with rear wall) 400 mm high, stanchions (can be folded down and removed) Goldhofer "Premium" stowage box, front mounting on gooseneck, 45° chamfered corners, dimensions approx. 550 x 400 x 2,540 mm, with side doors and rectangular lid that folds forwards, doors and lid lockable, 2 plug-in partitions inside. 2 pairs of warning signs, 423 x 423 mm, with 3 LED position lights, incl. push-on tube for rotating beacon, bracket for warning signs extendable to max. 4,200 mm. Additional warning sign holder, mounted on the front chassis Rotating beacon LED (2 pieces), plug-in, light switched via parking light Central lubrication system, type "Progressiv" for normal grease, with 3 pumps 2 pairs of lashing point(s) M36 screwable LC=16,000 daN, loose 1 "Convoi Exceptionnel" sign 1 set of aluminum drive-on wedges for driving onto the front of the excavator bridge, 2-part de

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 45 kg, permissible axle load (axle 2): 45 kg, permissible axle load (axle 3): 45 kg, loading space width: 3,000 mm, loading space height: 1,170 mm, total width: 3,000 mm, total height: 1,170 mm, suspension: hydraulics, tire size: 215/75R17.5, wheelbase: 1,500 mm, color: red, Year of construction: 2026, Main Features Year: New Universal Gooseneck SH 35/2 Loading platform: 3,700 mm x 2,440 mm 3.5 inch king pin Hydraulic lifting and lowering Hydraulic support cylinders Coupling height: 1,450 mm Integrated lashing points Lashing rings Spare wheel + spare wheel holder Hydraulic locking pin Automatic lubrication for gooseneck with Beka-MAX pump Hatz Diesel PPU Hatz single-cylinder diesel engine (silent pack) @ 9.6 kW 240 L hydraulic oil tank, powder coated 35 l/min flow rate and max. working pressure of 250 bar Three sizes of quick couplers for pressure connection Three sizes of quick couplers for tank connection Electric RPM control THP SL 3 Max. axle load: 45,000 kg per axle Nsdpfx Aox S Evbsmgjlb Total axle load: 3 x 45,000 kg = 135,000 kg GVW: 135,000 kg Unladen weight: 10,650 kg Payload: 124,350 kg Total length: 4,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 4 Max. axle load: 45,000 kg per axle Total axle load: 4 x 45,000 kg = 180,000 kg GVW: 180,000 kg Unladen weight: 13,850 kg Payload: 166,150 kg Total length: 6,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 5 Max. axle load: 45,000 kg per axle Total axle load: 5 x 45,000 kg = 225,000 kg GVW: 225,000 kg Unladen weight: 17,250 kg Payload: 207,750 kg Total length: 7,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 6 Max. axle load: 45,000 kg per axle Total axle load: 6 x 45,000 kg = 270,000 kg GVW: 270,000 kg Unladen weight: 19,800 kg Payload: 250,200 kg Total length: 9,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) Low Profile Deck FB 300 - 10,000 mm, without mechanical coupling, non-driveable - Payload rating in combination (6+6): 300 t - Height 300 mm, length 10,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - Bogies for modular configuration - Dead weight approx. 21,300 kg - Incl. hydraulic locking pin for connecting modular bogies lengthwise 1 x Low Profile Deck FB 250 - 8,000 mm, with mechanical coupling, non-driveable - Payload rating in combination (6+6): 170,000 kg - Height 250 mm, length 8,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - 1x extension for low profile deck, 4,000 mm - 1x extension for low profile deck, 5,000 mm General Information Year of construction: 2026 Axle Configuration Tyre size: 215/75 R17.5 Axle brand: BPW Eco Plus Suspension: hydraulic suspension Center axle 1: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 2: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 3: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 4: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 5: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 6: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Functional Deck height: 117 cm Extendable chassis: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Damages: none Financial Information...

Condition: used, machine/vehicle number: 13348, empty load weight: 11,600 kg, maximum load weight: 35,900 kg, overall weight: 47,500 kg, axle configuration: 3 axles, first registration: 06/1982, tire size: 9,5 r17,5 zwilling, Further information Nlodpfx Amoi Riyzogeb 1st axle rigid, 2nd + 3rd axle hydr. positively steered with saddle deflection wedge, 1 pair of hydr. support legs incl. hand pump for emergency operation, leaf suspension, 6 storage compartments, steel riffle plate complete, air: red-yellow + electrics: 1x 7-pin Length of gooseneck approx.: 4,380 mm Length drop deck approx.: 11,300 mm Saddle height approx.: 1,200 mm

Condition: used, empty load weight: 1,550 kg, maximum load weight: 7,450 kg, overall weight: 9,000 kg, axle configuration: 1 axle, first registration: 10/2021, suspension: steel, tire size: 385/65 22,5, tire condition: 90 %, color: yellow, Year of construction: 2021, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 40324 Goldhofer, Ballast * Year of manufacture: 2021 * Air connection with coupling head (red + yellow) * Electrical connector: 2 x 7-pin * Suspension: leaf spring * Gross vehicle weight: 9,000 kg * Unladen weight: 1,550 kg * Payload: 7,450 kg * Permissible total weight: 9,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 90% -- 90% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Manufacturer: Eggers ZX 9E * 50 mm towing eye Disclaimer: Subject to change, prior sale, and errors excepted. Additional photos and videos can be found on our homepage. Our comprehensive service includes: * Purchase, sale, and rental of commercial vehicles * Fast and straightforward financing solutions * Handling of all (export) documentation * Procurement of export and customs license plates * Vehicle preparation: new tarpaulins, signwriting, painting, etc. Njdeynrvxjpfx Amgjlb * Professional loading and load securing * TÜV inspections and registration services * Transfer of commercial vehicles Please contact our trained specialist staff for advice – we will be happy to assist you.

Condition: used, empty load weight: 1,550 kg, maximum load weight: 7,450 kg, overall weight: 9,000 kg, axle configuration: 1 axle, first registration: 10/2021, suspension: steel, tire size: 385/65 22,5, tire condition: 90 %, color: yellow, Year of construction: 2021, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: truck registration, Reference number for inquiries: 40325 Goldhofer, ballast trailer * Year of manufacture: 2021 * Air connection coupling head (red + yellow) * Connection plug: 2x 7-pin * Suspension: leaf spring * Gross vehicle weight: 9,000 kg * Unladen weight: 1,550 kg * Payload capacity: 7,450 kg * Permissible total weight: 9,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 90% -- 90% (tire size: 385/65 R22.5) * Tire sizes: 385/65 R22.5 * Manufacturer: Eggers ZX 9E * 50 mm towing eye Disclaimer: Specifications and details subject to change, prior sale, and errors excepted. You can find more photos and videos on our website. Our comprehensive services include, for example: * Purchase, sale, and rental of commercial vehicles Nledpfx Amoynrv Eegjb * Fast, straightforward financing solutions * Processing of all (export) documentation * Ordering export and customs number plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TÜV inspections and registration service * Transfer/delivery of commercial vehicles Please contact our trained staff. We will be happy to advise you.

Condition: used, color: red, Year of construction: 2000, Goldhofer SPN-L3-32/80. Year of manufacture: 2000. Nlsdpfjy Du D Sox Amgjb 8 t BPW axles. Unladen weight: 11,000 kg. Payload: 25,000 kg. Gross vehicle weight: 36,000 kg. Kingpin load: 12,000 kg. Air suspension. Mega/Lowdeck. Extendable by 7.3 meters. Wheel recesses (internal height: 650 mm). Loading platform dimensions: Length: 13,500 mm Width: 2,550 mm Height: 1,100 mm Fifth wheel height: 1,000 mm Tyres: 235/75R17.5, 80% tread remaining. German trailer! Available: 2 units ID No: 571. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements concluded by Heinhuis and the negotiations preceding them. By responding in any way, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken notice of these General Terms and Conditions. Our prices are net export prices. = Further information = Year of construction: 2000 Unladen weight: 11,000 kg Payload: 25,000 kg gross vehicle weight: 36,000 kg Extendable body: Yes = Company Information = For more information: WhatsApp:

Condition: used, color: red, Year of construction: 2000, Goldhofer SPN-L3-32/80. Year of manufacture: 2000. 8-ton BPW axles. Unladen weight: 11,000 kg. Payload capacity: 25,000 kg. Gross vehicle weight: 36,000 kg. Kingpin load: 12,000 kg. Air suspension. Mega/Lowdeck version. Extendable by 7.3 meters. Wheel well recesses (internal height: 650 mm). Floor dimensions: Nodpfsy Dhq Eox Amgslb Length: 13,500 mm Width: 2,550 mm Height: 1,100 mm Kingpin height: 1,000 mm Tyres: 235/75R17.5, 80% tread remaining. German trailer! 2 units available! ID No.: 497. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = Year of manufacture: 2000 Unladen weight: 11,000 kg Payload: 25,000 kg Gross vehicle weight: 36,000 kg Extendable body: Yes = Company Information = For more information: WhatsApp:

Condition: used, empty load weight: 3,400 kg, maximum load weight: 15,300 kg, overall weight: 18,700 kg, axle configuration: 2 axles, first registration: 02/2006, loading space length: 3,000 mm, loading space width: 2,500 mm, loading space height: 1,300 mm, loading space volume: 9 m³, total length: 3,000 mm, tire size: 385/65 22,5, tire condition: 60 %, color: red, Year of construction: 2006, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference No. for inquiries: 40205 Goldhofer, Ballast • Year of manufacture: 2006 • ABS, Anti-lock Braking System • Air connection coupling heads (red + yellow) • Electrical connectors: 2 x 7-pin plugs • Gross weight: 18,700 kg • Unladen weight: 3,400 kg • Payload capacity: 15,300 kg • Permissible total weight: 18,700 kg • Tyre condition, axle 1: 50% – 50% — Tyre size: 385/65 R22.5 • Tyre condition, axle 2: 60% – 80% — Tyre size: 385/65 R22.5 Nsdpfx Aeyx Sd Eomgjlb • Tyre sizes: 385/65 R22.5 • Internal dimensions: L = 3,000 mm, W = 2,500 mm, H = 1,300 mm • Internal volume*: 10 m³ • Pallet spaces: • Goldhofer • TX2-15/80 Disclaimer: Specifications subject to change; intermediate sale and errors excepted. More photos and videos available on our website. Our comprehensive service portfolio includes, for example: • Purchase / sale / rental of commercial vehicles • Fast, straightforward financing • Assistance with all (export) documentation • Ordering of export / customs number plates • Vehicle preparation: new tarpaulins, branding, painting, etc. • Professional loading / load securing • TÜV approvals, registration service • Transfer / delivery of commercial vehicles Consult our trained professionals — we are pleased to advise you.

Condition: used, first registration: 06/1984, overall weight: 39,500 kg, empty load weight: 13,600 kg, color: other, gearing type: other, emission class: none, maximum load weight: 25,900 kg, next inspection (TÜV): 05/2022, suspension: other, tire size: 12.00-20/18PR, front tire size: 12.00-20/18PR, rear tire size: 12.00-20/18PR, driver cabin: other,

Condition: used, empty load weight: 8,100 kg, maximum load weight: 23,900 kg, first registration: 10/1998, total length: 13,500 mm, total width: 25,500 mm, total height: 15,000 mm, suspension: air, tire size: 295/60 R 22.5 /8mm, wheelbase: 1,800 mm, front tire size: 295/60 R 22.5 /8mm, operation weight: 32,000 kg,

Condition: used, empty load weight: 3,600 kg, maximum load weight: 14,400 kg, overall weight: 18,000 kg, axle configuration: 1 axle, first registration: 02/2009, suspension: steel, tire size: 385/65 22,5, tire condition: 50 %, color: green, Year of construction: 2009, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 40322 Goldhofer, Ballast * Year of manufacture: 2009 * ABS, Anti-lock Braking System * Air suspension * Retractable lashing rings Nljdjynrvrjpfx Amgeb * 2x7-pin connection plug * Suspension: leaf springs * Gross weight: 18,000 kg * Unladen weight: 3,600 kg * Payload: 14,400 kg * Permissible total weight: 18,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 70% -- 50% - Tire size: 385/65 R22.5 * Tire condition 2nd axle: 30% -- 30% - Tire size: 385/65 R22.5 * Tire size: 385/65 R22.5 * Manufacturer: Obermaier * Model: OS2-B180L * Air suspension * Duomatic coupling Disclaimer: Subject to change, prior sale, and errors excepted. You’ll find more photos and videos on our homepage. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing options * Application for all (export) documents * Ordering export or customs registration plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * Technical inspections (TÜV), registration service * Transport of commercial vehicles Contact our trained professionals—we will be happy to advise you.

Condition: excellent (used), total width: 3,000 mm, color: green, Year of construction: 2023, Colour: Green Extendable Braked Units: 1x Goldhofer THP / ADD 2.0 6 / 12×08 S 1x Goldhofer PPU / ADD – 530 / 3000 Nedpfx Aev I A Syomgslb 1x Goldhofer THP SL 6 SPLIT 1x Goldhofer THP SL 2 01x Goldhofer THP / ADD 2.0 6 – 12 x 08 s Year of manufacture: 2023 VIN: WG0THPA68N0062326 Only a few test kilometres! (approx. 7 km) Axle load capacity: 36 t per axle line Steering angle: 55° at each suspension level BPW axles Michelin tyres / 215 / 75 R 17.5 EBS braking system Hydro-mechanical steering Central lubrication 01x Goldhofer THP SL 2 axle module Year of manufacture: 2023 VIN: WG0THPS26N0042340 Only a few test kilometres! Axle load capacity: 45 t per axle line Steering angle: 55° BPW axles Michelin tyres Hydro-mechanical steering Central lubrication 01x Goldhofer THP SL 6 Split Year of manufacture: 2023 VIN: WG0THPS64N0042341 Only a few test kilometres! Axle load capacity: 45 t per axle line Steering angle: 55° BPW axles Michelin tyres / 215 / 75 R 17.5 EBS braking system Hydro-mechanical steering Central lubrication 01x Goldhofer PowerPack Unit / ADD – 530 / 3000 Year of manufacture: 2023 VIN: 62327-00 Deutz 6-cylinder diesel engine 390 kW / 530 HP Operating hours: Only 32 hours! Emission level: EU Stage 5 Wireless remote control operation = Further information = Year of manufacture: 2023 Technical condition: very good Visual condition: very good Price: On request Please contact Stefan Schaapveld for further information.

Condition: used, first registration: 08/1998, total length: 16,000 mm, total width: 2,550 mm, Year of construction: 1998, GOLDHOFER STZ-TL 3-33/80 3-axle low-bed (gooseneck) semi low-loader with 3 steering axles, with lowerable platform and hydraulic ramps TRAILER HAS BEEN SANDBLASTED AND PAINTED!! • ABS • 3 x BPW ECO-Plus air suspension axles • 3 x steering axles • lifting/lowering system • hydraulic, 2-part access ramps • hydraulically lowerable platform • extendable to 3 m width • warning signs • NATO connector for the electric/hydraulic pump • overall length: 16,000 mm • empty weight: 15,900 kg • GVW: 48,000 kg (technically possible: 48,000 kg) Nodpfx Amowpknwogjlb • payload: 32,100 kg • 4 x axle load gauges • twin tires: 235/75 R17.5 - TÜV / inspection and SP: !! new !! - German vehicle! Subject to errors and prior sale!