Used Goldhofer Trailers for sale (93)

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3+5) 8-piece hydraulic swing BPW axle unit with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low bed trailer, type STHP (3+5), comprising 4 heavy-duty modules with a detachable gooseneck, up to 5 m long telescopic excavator low bed with 4 wheel recesses, ABS, and technical payload up to 175,620 kg. Consisting of the following four separate heavy-duty modules: 1st Module: Hydraulic universal gooseneck, type STH - Can be combined with heavy-duty dolly modules and overdrive loading bridges - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - King pin: 3.5" - Plug-in aluminum side walls - Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - Permissible total weight (as a single module): 108,000 kg - Permissible axle load: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technical payload (as a single module): up to 97,650 kg at 5 km/h - 8 hydraulic pendulum axles, tires: 215/75/R17.5 - Axle load: 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Hydro-mechanical 2-circuit forced all-wheel steering integrated in chassis, max. axle steering angle: 60°, with integrated hydraulic oil tank - Front/rear optimized pin-plate coupling for longitudinal configurations - Single-wheel pendulum axle assemblies, total 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - BPW axles with drum brake incl. ABS, technical axle load 34 t at 5 km/h 3rd Module: Low bed heavy-duty module, extendable - excavator bridge - Year of manufacture: 2002 - Internal dimensions: approx. 7.50 m length, 3.00 m width, loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extension module in the front area - Overall height in wheel recess area: approx. 150 mm - Loadable up to 80 t in the low bed and 175.6 t in the complete module combination STHP 8 (3+5) - Front and rear hydraulic bolt plate coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module Crjdpfx Aez N Np Nsafji - First registration: 04.01.2002 - Permissible total weight: 115,000 kg - Permissible axle load: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-wheel hydraulic pendulum axles with 4 wheels per axle line, 20 x 285/70 R 19.5 tires - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - Radio remote control for steering axles 5. Notes: The 4 heavy-duty modules allow for up to 3 different train combinations! Payloads vary depending on combination. The low bed can be inspected and demonstrated at our site. A current manufacturer's certificate from Goldhofer is available for this special low bed combination. Price NET plus 19% VAT. All information subject to change and prior sale. Internal vehicle number: 2285 Advert also available in full German / Inserat auch komplett in Deutsch verfügbar

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Cjdpfx Aaez N Nqmofori

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8 units of hydraulic BWP pendulum axle assemblies with remote control. Technically permissible gross weight 219,000 kg Technically permissible payload 175,620 kg Hydraulically suspended, 8-axle steered Goldhofer low-bed heavy-duty trailer type STHP 8 (3+5), consisting of 4 heavy-duty modules with a detachable gooseneck and extendable excavator low-bed section up to 5 meters, featuring 4 wheel recesses, ABS, technically permissible payload up to 175,620 kg. Consisting of the following 4 separate heavy-duty module parts: 1st module: Hydraulic universal gooseneck type STH/ST Year of manufacture: 2002 Can be combined with heavy-duty module undercarriages, drivable loading platforms. Unladen weight approx. 5,900 kg Permissible front fifth wheel load: 35,000 kg Length approx. 4.10 m Fifth wheel height approx. 1.30 m King pin 3.5" pin Removable aluminum side walls Fully hydraulically adjustable 2nd module: Goldhofer THP/ST3 3-axle heavy-duty module First registration: 14.11.2001 As a single module, technically permissible total weight: 108,000 kg, technically permissible axle loads: 36,000 kg at 5 km/h possible. Unladen weight: 10,350 kg As a single module, technical payload up to 97,650 kg at 5 km/h possible. 8 hydraulic pendulum axles, 24 wheels, tire size: 215/75/R17.5 Axle load: 25 t at 20 km/h Vehicle width: 3 meters Axle spacing: 1.5 meters Max. steering angle: ±60° Integrated into chassis: hydromechanical dual-circuit all-wheel forced steering with a maximum aggregate steering angle of 60°, integrated hydraulic oil tank Optimized bolt-lug coupling at front and rear for longitudinal combinations Single-tired pendulum axle assemblies with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles BPW axles with drum brake and ABS, technically permissible axle load of 34 t at 5 km/h 3rd module: Extendable low-bed heavy-duty module - Excavator bridge Year of manufacture: 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide, loading height 0.40 meters Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with drive-on module at the front Construction height in wheel recess area approx. 150 mm Load capacity up to 80 t in low-bed and 175.6 t in overall STHP8 (3+5) module possible. Unladen weight 11,900 kg Front and rear hydraulic bolt-lug coupling with claw coupling adapter 4th module: Goldhofer THP/ET5 5-axle heavy-duty module First registration: 04.01.2002 Technically permissible total weight: 115,000 kg, technically permissible axle loads 23,000 kg at 5 km/h possible Unladen weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tired hydraulic pendulum axle assemblies with 4 wheels per axle line, 20 wheels (tire size 285/70 R 19.5) Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure suspension Hydraulic steering for all axles Remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different tractor combinations are possible! Payloads change depending on the configuration. For the special low-bed combination, a current manufacturer's certificate from Goldhofer is available. The low-bed trailer can be tested at our facility. Price NET excluding 19% VAT. All information without guarantee. Subject to errors and prior sale. Internal vehicle number: 2285 Cjdpfx Aoz N Nrqeafsri

Condition: used, machine/vehicle number: WG0STZL49C0030856, axle configuration: > 3 axles, first registration: 01/2012, loading space length: 11,480 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, = Additional Options and Accessories = - Rear air suspension - Front air suspension = Additional Information = Weights Payload: 48,000 kg GVWR: 14,560 kg Cjdpfx Aas Agffvjfsri Condition Overall condition: average Technical condition: average Optical condition: average Additional Information Condition of front tires: 70 Condition of rear tires: 70 Front tires: 245/70 R17.5 Rear tires: 245/70 R17.5 Last inspection: 2026-06-29 Additional Information Please contact Lastas Sales for more information.

Condition: used, maximum load weight: 23,000 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 10/2018, loading space length: 8,360 mm, loading space width: 2,540 mm, total length: 10,550 mm, total width: 2,550 mm, total height: 3,550 mm, Equipment: ABS, Low-bed length approx. 5,420 mm, can be widened to 3,000 mm, loading height of the bed: approx. 890 mm, rear slope: 800 mm, upper deck 1,640 mm, front slope 500 mm, hydraulically operated ramps, laterally adjustable (L x W) 3300 x 720 mm, folding supports at the rear, 6 x heavy-duty lashing points per side, 4 x lashing points per side, 4 x stake pocket per side, excavator arm recess / (L x W) 1600 x 740 mm, drawbar with swivel eye 50 mm, rotating beacon, extendable warning signs, BPW EcoPlus axle(s), drum brake system, stainless steel toolbox, spare wheel holder under the body, leaf spring suspension, the vehicle can be covered with advertising and/or lettering. SI87260 Cjdpfxoz Amyys Aafsri Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to prepare a financing or leasing offer for this item. Please do not hesitate to contact us!

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 16,200 mm, loading space width: 2,750 mm, loading space height: 960 mm, total length: 16,200 mm, total width: 2,750 mm, suspension: hydraulics, tire size: 235 / 75 R17.5, color: blue, Details Chassis number: WSTZH8D90030493 Type: Trailers Year: 2009 Brand: Goldhofer Additional information Main Features Manufacturer: Goldhofer Type: STZ H8-82-80A Chassis number: WSTZH8D90030493 Year: 2009 Weights King-Pin load: 26,000 kg Axle load: 10,000 kg Total axle load: 8 x 10,000 kg = 80,000 kg GVW: 106,000 kg Empty weight: 23,480 kg Loading capacity: 82,520 kg Axles Axle brand: BPW Hydraulic suspension WABCO braking system with EBS ABS 1st axle: friction steering 2nd axle: rigid Axles 3 to 8: hydraulic steering Axle 1 & 2: liftable Tyres: 235 / 75 R17.5 Dimensions Length: 16,200 mm Extensions: 8,300 mm Max extended length: 24,500 mm Loading floor length: 12,300 mm to 20,600 mm Loading floor width: 2,750 mm Loading floor height: 955 mm King-Pin height: +/- 1,280 mm Additional Information Operated on truck hydraulics Hydraulic operated gooseneck Lashing rings Stake pockets Wooden loading floor Mechanical landing gear Toolbox in gooseneck King-pin 3.5” Central lubrication Marker boards for oversize load Radio remote control = Further Information = General Information Year of manufacture: 2009 Year of construction: 2009 Codpfxswwkrle Aafjri Axle Configuration Tire size: 235 / 75 R17.5 Axle brand: BPW Suspension: hydraulic suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 10,000 kg; Steerable Rear axle 2: Twin tires; Lift axle; Max. axle load: 10,000 kg Rear axle 3: Twin tires; Max. axle load: 10,000 kg; Steerable Rear axle 4: Twin tires; Max. axle load: 10,000 kg; Steerable Rear axle 5: Twin tires; Max. axle load: 10,000 kg; Steerable Rear axle 6: Twin tires; Max. axle load: 10,000 kg; Steerable Rear axle 7: Twin tires; Max. axle load: 10,000 kg; Steerable Rear axle 8: Twin tires; Max. axle load: 10,000 kg; Steerable Weights Empty weight: 23,480 kg Payload: 82,520 kg GVW: 106,000 kg Functional Loading floor height: 96 cm Extendable structure: Yes Condition Technical condition: very good Optical condition: very good Financial Information Price: On request

Condition: used, maximum load weight: 38,000 kg, overall weight: 50,000 kg, axle configuration: 3 axles, first registration: 03/2009, with air suspension, hydromechanical forced steering, and single-extendable loading platform, STZ-L Gooseneck - Robust steel welded construction - Designed loading area 3,500 x 2,480 mm - Hydromechanical forced steering (dual-circuit steering) in a low-profile design (overall height 235 mm) with adjustable guide elements - Turntable-mounted fifth wheel plate with interchangeable 2" kingpin and adjustable steering wedge Loading platform - Single-extendable, designed as an outer-inner tube construction with a fixed 1,000 mm front loading platform section - Locking of the extension stages via spring-loaded cylinders and conical bolts Chassis - Air-suspended 3-axle chassis - BPW (Eco) axle assembly, consisting of three hydromechanically forced-steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift and lower valve for lowering to min. 825 mm or raising to max. 1025 mm - Load height 1: 885 mm - Load height 2: 925 mm Rear end of the vehicle - Straight design - Short 1,000 mm rear overhang from the center of the last axle - Mechanical rear support Brake system - 2-line all-wheel pneumatic brake system with diaphragm brake cylinders - Automatic load-dependent braking (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABV brake Special equipment - "BekaMax" central lubrication system - Electrical unit - Radio remote control Technical data Gooseneck Loading area (LxW): 3,500 x 2,480 mm Crjdpfxsyrzwto Aafei Construction height above fifth wheel coupling: 235 mm Coupling height loaded: 1,300 mm Loading platform Loading area (LxW): 10,000 x 2,550 mm Extendable by 7,500 mm In stages up to (LxW): 17,500 x 2,550 mm Loading height loaded: 925 mm (+/- 100 mm) 2nd ride position: 885 mm (+140/-60 mm) Steering 1st to 3rd axle hydromechanically forced steered (dual-circuit steering)

Condition: used, empty load weight: 9,600 kg, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 10/2012, loading space length: 8,800 mm, loading space width: 2,500 mm, loading space height: 860 mm, color: silver, Year of construction: 2009, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * 1st hand * Condition, see photos * Low-loader Goldhofer, type STN-L3-39/80 * 3-axle low-loader with extra long ramps * Ramps hydraulically operated and laterally adjustable * Loading length 8.80 m x 2.50 m * Loading height 0.85 m * SKF axles * 2 supports * Steerable trailing axle * Leaf/air suspension with lift/lower function * DIN heavy-duty lashing rings * EBS * ABS (Anti-lock Braking System) * Tool box * Twin tires * Permissible total weight up to 48,000 kg * Unladen weight 9,600 kg * Payload 38,400 kg If a new technical inspection (TÜV) is required, we will be happy to provide a quote via our partner workshops. Our offer generally does NOT include new TÜV certification, new DGUV, new SP, or new UVV inspection. You can find more trucks on our homepage at Credpfx Aswxm Ileafsi We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to avoid any misconceptions about their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, maximum load weight: 30,400 kg, overall weight: 41,200 kg, axle configuration: 2 axles, first registration: 10/2009, next inspection (TÜV): 01/2027, Vehicle description according to the supplier: Dimension B: 12,000 mm Unladen weight: 13,000 kg with air suspension, hydromechanical forced steering, and a simply extendable loading platform. STZ-L gooseneck: - Robust steel welded construction - Loading platform measuring 3,500 mm x 2,480 mm - Rear deflection radius: 1,900 mm - Fifth wheel load: 10,800 kg - Hydromechanical forced steering (2-circuit steering) in a low-profile design (overall height 235 mm) with adjustable guide elements - Ball bearing slewing ring fifth wheel with replaceable 2" kingpin and adjustable steering wedge - Mechanical fifth wheel supports Loading platform: - Simply extendable, designed as an outer and inner tube construction with a fixed 700 mm long loading platform section at the front - Locking of the extension stages by means of spring accumulator cylinders - 300 mm long sliding table Cedpsz D R A Eefx Aafori Chassis: - Air-suspended 4-axle chassis - BPW (Eco) axle unit, consisting of a fixed axle and three hydraulically and mechanically forced steering axle stubs - Axles with adjustable tapered roller bearings and automatic slack adjusters (ASA) - Raising and lowering valve standard - 1 axle can be lifted Vehicle rear: - Straight design - 2,100 mm overhang from the center of the last axle - Rear support with downpipe Braking system: - 2-line all-wheel pneumatic braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (ASA) - Parking brake by means of spring accumulator cylinders - ABS brake Special equipment: - Foldable widening elements - Central lubrication system "BekaMax" - Lifting option (load-dependent) of the 1st axle - Radio remote control Technical data: Gooseneck: Loading platform (L x W): 3,500 x 2,480 mm Overall height above fifth wheel coupling: 235 mm Fifth wheel height loaded: 980 mm Loading platform: Loading platform (L x W): 9,600 mm x 2,550 mm Extendable by 6,000 to 15,600 mm Loading height loaded: 755 mm (+140-60 mm) 2nd driving position: 805 mm (+/-100 mm) Steering: 1st axle can be lifted 2nd axle - 4th axle hydraulically and mechanically forced steering (2-circuit steering)

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3+5) 8-piece hydraulic swing BPW axle unit with remote control. Technically permissible total weight: 219,000 kg Payload: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low bed trailer, type STHP (3+5), comprising 4 heavy-duty modules with a detachable gooseneck, up to 5 m long telescopic excavator low bed with 4 wheel recesses, ABS, and technical payload up to 175,620 kg. Consisting of the following four separate heavy-duty modules: 1st Module: Hydraulic universal gooseneck, type STH - Can be combined with heavy-duty dolly modules and overdrive loading bridges - Unladen weight: 5,900 kg - Permissible front fifth wheel load: 35,000 kg - Length: approx. 4.10 m - Saddle height: approx. 1.30 m - King pin: 3.5" - Plug-in aluminum side walls - Fully hydraulically movable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module - Permissible total weight (as a single module): 108,000 kg - Permissible axle load: 36,000 kg at 5 km/h - Unladen weight: 10,350 kg - Technical payload (as a single module): up to 97,650 kg at 5 km/h - 8 hydraulic pendulum axles, tires: 215/75/R17.5 - Axle load: 25 t at 20 km/h - Vehicle width: 3 m - Axle spacing: 1.5 m - Max. steering angle: ±60° - Hydro-mechanical 2-circuit forced all-wheel steering integrated in chassis, max. axle steering angle: 60°, with integrated hydraulic oil tank - Front/rear optimized pin-plate coupling for longitudinal configurations - Single-wheel pendulum axle assemblies, total 8 wheels per axle line - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - BPW axles with drum brake incl. ABS, technical axle load 34 t at 5 km/h 3rd Module: Low bed heavy-duty module, extendable - excavator bridge - Year of manufacture: 2002 Crodsz N Nq Hepfx Aafji - Internal dimensions: approx. 7.50 m length, 3.00 m width, loading height 0.40 m - Construction height: 350 mm - Extendable by approx. 5.00 m - Unladen weight: 11,900 kg - 4 wheel recesses, extension module in the front area - Overall height in wheel recess area: approx. 150 mm - Loadable up to 80 t in the low bed and 175.6 t in the complete module combination STHP 8 (3+5) - Front and rear hydraulic bolt plate coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module - First registration: 04.01.2002 - Permissible total weight: 115,000 kg - Permissible axle load: 23,000 kg at 5 km/h - Unladen weight: approx. 14,200 kg - Technical payload: up to 100,800 kg - Single-wheel hydraulic pendulum axles with 4 wheels per axle line, 20 x 285/70 R 19.5 tires - Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure accumulator suspension - Hydraulic steering for all axles - Radio remote control for steering axles 5. Notes: The 4 heavy-duty modules allow for up to 3 different train combinations! Payloads vary depending on combination. The low bed can be inspected and demonstrated at our site. A current manufacturer's certificate from Goldhofer is available for this special low bed combination. Price NET plus 19% VAT. All information subject to change and prior sale. Internal vehicle number: 2285 Advert also available in full German / Inserat auch komplett in Deutsch verfügbar

Condition: used, color: yellow, Goldhofer STZ-L5 (245) A. Year: 2017. 10-12 tons BPW axles. Weight: 17,900 kg. Load capacity: 52,100 kg. Max. weight: 70,000 kg. Kingpin load: 20,000 kg. 8.10 meter extendable. Hydraulic system from trailer operates on hydraulic system from a truck. Air suspension. Aluminum decking and toolbox on the gooseneck. Power steering on 5 steering axles. Radio remote control. Dimensions: Gooseneck: L: 3,700 mm. W: 2,480 mm. H: 1,500 mm. Kingpin height: 1,300 mm. Floor: L: 11,780 mm. W: 2,750 mm. H: 900 mm. Tires: 245/70R17.5, 60-90% remaining tread. German trailer! In top condition! ID No.: 583. The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. Crodpfx Aae Ahtd Tofoi = Further information = Year of manufacture: 2017 Construction year: 2017 Unladen weight: 17,900 kg Payload: 52,100 kg GVWR: 70,000 kg Extendable superstructure: Yes = Company information = For more information:

Condition: used, overall weight: 54,000 kg, axle configuration: 3 axles, first registration: 06/2008, Equipment: ABS, Vehicle Identification No.: WG0STZV3580032213 First registered: June 4, 2008 German vehicle inspection due Own weight: 17,500 - 21,000 kg Removable gooseneck King pin 3.5" ----Lowbed length: 7,800 mm - Loading height: approx. 470 mm Telescoping by 4,900 mm Extendable WHEEL HOLDS Chassis: 4,100 mm Excavator recess - Digger arm recess Central lubrication system BPW Eco axles with drum brakes with radio control 3 x hydraulically steered axles Crodetpr E Topfx Aafoi Axle loads: 3 x 10,000 kg Removable gooseneck - Fifth wheel load: 24,000 kg Tires: 235/75 R 17.5 Subject to change, prior sale, and errors. This description serves as a general identification of the vehicle and does not constitute a warranty under the law of purchase. The description in the purchase contract is decisive. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we would be happy to provide you with an offer from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: used, maximum load weight: 38,000 kg, overall weight: 50,000 kg, axle configuration: 3 axles, first registration: 03/2009, with air suspension, hydromechanical forced steering, single telescoping loading platform, STZ-L gooseneck - robust steel welded construction - designed loading area 3,500 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) in a flat design (construction height 235 mm) with adjustable guide elements - slewing ring-mounted fifth wheel plate with interchangeable 2" kingpin and adjustable steering wedge Loading platform - single telescoping, designed as an outer-inner tube construction with a 1,000 mm long fixed front deck section - locking of the extension stages via spring-loaded cylinders and conical bolts Chassis - air-suspended 3-axle chassis, - BPW (Eco) axle assembly, consisting of three hydromechanically forced-steered stub axles - axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift and lower valve for a lowering to at least 825 mm or a raising to a maximum of 1025 mm - Loading height 1: 885 mm - Loading height 2: 925 mm Rear of the vehicle - straight design - short 1,000 mm overhang from the center of the last axle - mechanical rear support Crjdoyrzv Nspfx Aafoi Brake system - 2-line all-wheel air brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABV brake Special equipment - "BekaMax" central lubrication system - Electric aggregate - Radio remote control Technical data Gooseneck Loading area (LxW): 3,500 x 2,480 mm Build height over fifth wheel: 235 mm Fifth wheel height loaded: 1,300 mm Loading platform Loading area (LxW): 10,000 x 2,550 mm Telescopable by 7,500 mm in stages up to (LxW): 17,500 x 2,550 mm Loading height loaded: 925 mm (+/- 100 mm) 2nd transport position: 885 mm (+140/-60 mm) Steering 1st – 3rd axle hydromechanically forced-steered (dual-circuit steering)

Condition: used, maximum load weight: 38,200 kg, overall weight: 50,000 kg, axle configuration: 3 axles, first registration: 04/2007, next inspection (TÜV): 05/2027, with air suspension, forced steering, with rear inclination, and loading ramps STZ-L gooseneck - designed loading platform 3,500 x 2,480 mm - inclination: Witgenschräge - ball bearing-mounted fifth wheel plate with replaceable 2" kingpin and adjustable steering wedge - mechanical fifth wheel supports - turning radius 2,300 mm Loading platform - 1 pair of wheel recesses, rotatable after the gooseneck, depth 380 mm, length at the top 2,560 mm - 1 pair of wheel recesses after the 1st axle, depth 250 mm, length at the top 1,500 mm Chassis - air-suspended 3-axle chassis - Gigant axle assembly, consisting of one non-steered axle and two forced-steered steering knuckle axles - lifting and lowering valve Vehicle rear - design with inclination: 500 mm - hydraulic rear support Loading ramps - 1-piece hydraulic ramps with length 2,900 mm, width 720 mm Braking system - 2-circuit all-wheel pneumatic braking system with diaphragm brake cylinders - automatic load-dependent brake (ALB) - automatic slack adjusters (AGS) - parking brake via spring-loaded cylinders Credpfx Aaszvaaaefji - ABS braking system Technical data Gooseneck Loading platform (L x W): 3,500 x 2,480 mm Fifth wheel height, loaded: 1,215 mm Loading platform Loading platform (L x W): 9,100 x 2,500 mm Loading height, loaded: 885 mm (+140/-60 mm) Steering 1st axle: non-steered 2nd axle - 3rd axle: forced-steered Electrical system

Condition: used, empty load weight: 8,400 kg, maximum load weight: 15,600 kg, overall weight: 24,000 kg, first registration: 08/1993, next inspection (TÜV): 10/2022, loading space length: 10,000 mm, loading space width: 2,500 mm, suspension: air, tire size: 9.5R 17.5, color: other, gearing type: other, front tire size: 9.5R 17.5, rear tire size: 9.5R 17.5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Sales contacts: Frank Rau / Russian / English / German - Bachar Ibrahim / Arabic / English / German - Registration service, HU/SP/UVV, delivery to port Csdpfxeww Dwhs Aaferi Very long loading platform – 10.00 m! Hydraulic ramps Ready for operation Width-adjustable Grey-black Additional features: ABS, turntable, air brake, EBS, air suspension, price on request (Mobile), Suspension: air, Payload (kg): 15,600 Body type: width-adjustable, top condition, 10.00 m loading platform, HSN/TSN: 6631/000 Subject to errors and omissions.

Condition: used, Goldhofer MPA-V3C (245A). Year: 2019. 12-ton BPW axles. Weight: 18,400 - 19,000 kg. Max. weight: 64,000 kg. Kingpin load: 28,000 kg. Hydraulic system from trailer operates on NATO standard. Toolbox + Allu boards on gooseneck. 3 detachable floorboards. Hydr. detachable gooseneck. 4.8 meters extendable. Hydr. suspension. Excavator bridge: 4600x800 mm. Radio Remote Control. Central lubrication system. Dimensions: Neck: L: 3700 mm. W: 2550 mm. H: 1750 mm. Kingpin height: 1400 mm. Floor: L: 7000 mm. W: 2750 mm. H: 400 mm. Csdpfx Aj Ahtk Sjafori Floor thickness: 220 mm. Rear trailer: L: 4600 mm. W: 2750 mm. H: 900 mm. Tires: 245/70R17.5, 70%. German trailer! ID No.: 662. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of manufacture: 2019 Construction year: 2019 Unladen weight: 18,400 kg Payload: 45,600 kg GVW: 64,000 kg Extendable superstructure: Yes = Company information = For more information:

Condition: used, color: yellow, Goldhofer STZ-L3-27/80A. Year: 2008. 7.4-ton BPW axles. Weight: 13,800 kg. Load capacity: 26,400 kg. Max. weight: 40,200 kg. Kingpin load: 18,000 kg. 7.2-meter extendable. 2 x 25 cm widened. Power steering on 3 steering axles. Aluminum decking + toolbox on the gooseneck. Hydraulic system from trailer works with the truck's hydraulic system. Air suspension. Spare tire. Dimensions: Gooseneck: L: 3500 mm. W: 2550 mm. H: 1550 mm. Kingpin height: 1300 mm. Platform: L: 9500 mm. W: 2550 mm. H: 800 mm. Tires: 205/65R17.5, 80%. Radio remote control! ID No.: 684. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = Csdpfx Aaj Ahtm Aefsri Year of manufacture: 2008 Construction year: 2008 Unladen weight: 13,800 kg Payload: 26,400 kg GVWR: 40,200 kg Extendable superstructure: Yes = Company Information = For more information:

Condition: used, color: yellow, Goldhofer MPA-V 2-34/80A. Year: 2016. 12-ton BPW axles. Weight: 14,100 kg. Load capacity: 32,900 kg. Max. weight: 47,000 kg. Kingpin load: 23,000 kg. 5.4 meters extendable. Hydraulic system powered by the truck's hydraulics. Hydr. detachable gooseneck. Hydr. suspension. Radio remote control. Power steering. EBA ABS ALB. Excavator bridge. Tires: 245/70R15, 80% remaining tread. Csdpfx As Ahtbmoaferi Dimensions: Neck: L: 3850 mm. W: 2550 mm. H: 1600 mm. Kingpin height: 1200 mm. Floor: L: 6800 mm. W: 2550 mm. H: 370 mm. Floor thickness: 220 mm. Rear of trailer: L: 2770 mm. W: 2550 mm. H: 930 mm. German trailer with a new TÜV inspection certificate!! ID No: 402. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as to all agreements concluded by Heinhuis and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of manufacture: 2016 Year of construction: 2016 Unladen weight: 14,100 kg Payload: 32,900 kg GVW: 47,000 kg Extendable superstructure: Yes = Company information = For more information:

Condition: used, axle configuration: > 3 axles, first registration: 08/2002, loading space length: 7,800 mm, loading space width: 2,550 mm, loading space height: 400 mm, total length: 17,340 mm, total width: 2,550 mm, suspension: air, Additional information : Brand: GOLDHOFER Model: STZ-VL4 Structure: low loader ( lower platform 7800 mm + 4900 mm extendable / higher platform 5400 mm loading height 400 mm ) Year: 08.2002 Suspension: air Brakes: drum Dimensions: L/W: 17340 mm + 4900 mm extendable / 2550 mm Masses: full / empty: 50000 kg / 12840 kg Suspension type : air Brakes : Drum Suspension type : air Brakes : Drum Steering : Steering Suspension type : air Brakes : Drum Steering : Steering Suspension type : air Brakes : Drum Crodpfx Aaeuwtyqsfsi Steering : Steering = More information = Year of construction: 2002 Suspension: air suspension Middle axle 1: Steering Middle axle 2: Steering Rear axle: Steering Empty weight: 12.840 kg Carrying capacity: 37.160 kg GVW: 50.000 kg Please contact Andrei Somov or Mark Ševtšenko for more information

Condition: used, maximum load weight: 18,000 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 12/1991, loading space length: 8,200 mm, loading space width: 2,500 mm, Equipment: ABS, * ABS * BPW axles ----Construction: Low-loader trailer (2200+6000mm), loading height approx. 900mm, sloped rearward, drive-on height approx. 750mm, steel/wooden floor, extendable to 3m, spring-loaded loading ramps, lashing rings. Csdpfx Aewdb Ttoafsri Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE REGARDING EQUIPMENT AND ACCESSORIES. Our Terms and Conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations (see Legal Notice).

Condition: used, overall weight: 79,200 kg, axle configuration: > 3 axles, first registration: 05/2009, Goldhofer STZ VL4 46/80A, 4 steering axles, detachable, extendable Everything at a glance · First registration: 06.05.2009 · Color: Red · Tare weight: 19,650 kg · Gross vehicle weight: 79,200 kg · Tires: 245/70 R17.5 · Note: Immediately available Special equipment · Goldhofer STZ VL4 46/80A · 4-axle low loader with twin tires · 4 steering axles with remote control · Detachable gooseneck with aluminum side boards · Operation and pressure gauge on the left side of the gooseneck · Extendable (drawing available) · Can be equipped with widening plates · BPW axles Cjdpez Dmrpefx Aaferi · NATO socket · Heavy-duty securing points Standard equipment · 4-axle · Lifting and lowering valve · 2 wedges · Underrun protection Errors, typing errors and prior sale are reserved. The seller reserves the right to withdraw from the sale. Copyright: All texts, images and videos in this advertisement are subject to the copyright of STARENT Truck & Trailer GmbH. Any use, reproduction or distribution – even in excerpt – is not permitted without express written consent. _____ Internal number for inquiries: TR26266 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Contact persons for sales: Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: WhatsApp t: @: Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / WhatsApp t: -104 @: Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / WhatsApp t: -123 @: We speak 13 languages. We probably speak yours too. Contact us! Homepage: / Facebook: / Instagram: / Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks and vans. Contact persons for purchasing: Michael Doblhofer (German, English) p: WhatsApp t: -102 @:

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg Codpfoz N Nrkjx Aaferi As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, maximum load weight: 175,620 kg, overall weight: 219,000 kg, axle configuration: > 3 axles, first registration: 01/2002, Equipment: ABS, STHP 8 (3 + 5) 8-piece hydraulic BWP pendulum axle units with radio remote control. Total weight technically possible: 219,000 kg Payload technically possible: 175,620 kg Hydraulically suspended and 8-axle steerable Goldhofer low-bed low-loader type STHP 8 (3+5) consisting of 4 heavy-duty modules with a detachable gooseneck and up to 5-meter-long telescopic excavator low-bed with 4 wheel recesses with ABS up to 175,620 kg payload technically possible. Consisting of the following 4 separate heavy-duty module parts: 1st Module: Hydraulic universal gooseneck type STH / ST Year of manufacture 2002 Can be combined with heavy-duty module chassis, with drive-over loading bridges. Empty weight approx. 5,900 kg Permissible fifth-wheel load front 35,000 kg Length approx. 4.10 m Fifth-wheel height approx. 1.30 m King Pin 3.5" bolt Aluminum side boards plug-in Fully hydraulically adjustable 2nd Module: Goldhofer THP/ST3 3-axle heavy-duty chassis module First registration: 14.11.2001 As a single module total weight technically possible: 108,000 kg, axles technically possible load: 36,000 kg at 5 km/h possible. Empty weight: 10,350 kg As a single module technical payload up to 97,650 kg at 5 km/h possible. Hydraulic pendulum axles 8-fold, 24 x fitted with tires: 215/75/R17.5 Axle load: 25 tons at 20 km/h Vehicle width: 3 meters Axle distance: 1.5 meters Max. steering angle: ±60° Hydromechanical 2-circuit all-wheel forced steering integrated into the chassis with a maximum steering angle of the axle units of 60° with integrated hydraulic oil tank Front and rear optimized bolt-lug coupling for longitudinal combinations Single-tire pendulum axle units with a total of 8 wheels per axle line Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles BPW axles with drum brakes and ABS and technically possible axle load of 34 tons at 5 km/h 3rd Module: Extendable heavy-duty low-bed module - excavator bridge Year of manufacture 2002 Internal dimensions approx. 7.50 meters long, 3.00 meters wide and 0.40 meters loading height Construction height 350 mm Extendable by approx. 5.00 meters - telescopic 4 wheel recesses with ramp module in the front area Construction height in the wheel recess area approx. 150 mm Load up to 80 tons in the low-bed and 175.6 tons in the complete STHP8 (3+5) module possible. Empty weight 11,900 kg Front and rear hydraulic bolt lug coupling with claw coupling adapter 4th Module: Goldhofer THP/ET5 5-axle heavy-duty chassis module First registration: 04.01.2002 Technically possible total weight: 115,000 kg, axles technically possible load 23,000 kg at 5 km/h possible Empty weight: 14,200 kg Crsdjz N Nqaopfx Aafoi Technical payload up to 100,800 kg possible. Single-tire hydraulic pendulum axle units with 4 wheels per axle line fitted 20x with 285/70 R 19.5 Hydraulic axle compensation +/- 300 mm, hydropneumatic gas pressure spring suspension Hydraulic steering of all axles Radio remote control for steering axles 5. Notes: With the 4 heavy-duty modules, up to 3 different pull combinations are possible! The payloads change with different pull combinations. A current manufacturer's certificate from Goldhofer is available for the special low-bed combination. The low-bed can be tested at our facility. Price NET plus 19% VAT. All details provided without guarantee. Subject to changes, errors and prior sale. Internal vehicle number: 2285 Advertisement als

Condition: used, empty load weight: 15,000 kg, maximum load weight: 39,895 kg, overall weight: 54,895 kg, axle configuration: 3 axles, first registration: 10/1989, loading space length: 13,600 mm, loading space width: 2,750 mm, loading space height: 650 mm, total length: 14,850 mm, total width: 2,750 mm, total height: 3,500 mm, suspension: air, tire size: 8.25R15, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, forced steering, lift and lower function, lashing eyes, two-part loading ramps, hydraulic ramps. Crjdpfei Rqi Sex Aafsi Superstructure: hydraulically liftable low-bed trailer, hydraulic ramps. The trailer was partially overhauled in 2009 for EUR 11,000: NEW FLOOR, etc., and has not been used since. It can be widened from 2750 mm to 3250 mm. Loading length in the low-bed = 5850 mm, loading length over axles = 4250 mm, loading height over gooseneck approx.: 1620 mm, over loading area approx.: 650 mm, over axles approx.: 940 mm. 1/3 of the low-bed can be hydraulically raised! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: good (used), axle configuration: 3 axles, first registration: 07/2018, suspension: air, color: blue, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Air suspension = Further Information = General Information Year of manufacture: 2018 Axle Configuration Suspension: Air suspension Rear axle 1: Steerable Crjdpj Ahuq Eofx Aafsi Rear axle 2: Steerable Rear axle 3: Steerable Weights Unladen weight: 14,300 kg Payload: 32,700 kg GVW: 47,000 kg Maintenance, History and Condition APK (Technical Inspection): valid until 03/2027 Technical condition: good Optical condition: good Vehicle number: Low-loader: 05 Goldhofer MPA 3 / 3-axle PBW Steerable / With remote control / Extendable .: WG0MPA037J0039094 TÜV: 03/2027 - Inspection: 09/2026 PBW 3 x Steerable axles Hydraulic ramps Remote control Unladen weight: 14,300 Total weight: 47,000 Length: 8.90 m, with extension 12.00 m, total extended length 15.40 m Width: 2.54 m No liability for printing and typographical errors, changes, sales subject to prior sale and errors. = Company Information = No liability for printing and typographical errors, changes, sales subject to prior sale and errors. Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email: