Used Goldhofer Special Purpose Semitrailers for sale (87)

Condition: new, maximum load weight: 78,400 kg, overall weight: 98,000 kg, axle configuration: > 3 axles, total width: 2,750 mm, Year of construction: 2025, with air suspension, hydromechanical forced steering, single telescoping platform-type loading area, with 2-part loading ramps Unladen weight 21,100 kg Payload 76,900 kg Length = 14,050 mm STZ-L Gooseneck - 45° chamfered front corners (468 x 468 mm), closed outer frame - robust steel and welded construction - formed loading area 3,700 x 2,480 mm - hydromechanical forced steering (dual-circuit steering) in low-profile design (construction height 235 mm) with adjustable guide elements - Turntable-mounted saddle plate with replaceable 3.5" kingpin and adjustable steering wedge - Fifth wheel load 26,000 kg - Steering radius 2,700 mm - Premium tool box Loading area - "Platform, single telescoping" design Godpfxox Dqhkj Ah Tokb - Traffideck® polymer rubber surface - Loading area, single telescoping, designed as outer-inner tube construction - Extension stage locking via spring-loaded cylinders and locking bolts - Intermediate table 300 mm - Fixed support at front, 700 mm long Chassis - 6-axle air-suspended chassis, wheelbase 1,510 mm - Axle assembly from BPW, consisting of one fixed axle and five hydromechanically forced-steered stub axles with a maximum steering angle of 45° - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Standard lift and lower valve for lowering to a minimum of 785 mm or raising to a maximum of 985 mm (not for driving positions) - Chassis with open outer frame - Excavator trough at rear of chassis, 3,340 mm long and 874 mm wide Rear of vehicle - "Beveled 500 mm" design - Short 1,100 mm overhang from center of last axle - 2 integrated hydraulic supports for stabilizing the rear of the vehicle during loading operations 2-piece loading ramps with Super Grip surface - 2,600 + 1,200 x 720 mm - Upright hydraulic lifting unit with hand pump and cable extension - Hydraulic ramp adjustment Brake system - Dual-line full air brake system with diaphragm actuators - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring cylinders - ABV brake - Hydraulic connection - easyControl - Aluminum sideboards on 3 sides - Lift function (load-dependent) - Central lubrication system “BEKA-MAX” - Extendable widenings incl. infill planks, telescopically extendable up to 3,000 mm Technical Data Gooseneck Loading area (LxW) 3,700 x 2,480 mm Bevel: 1,080 mm Construction height above fifth wheel coupling 235 mm Fifth wheel height loaded 1,300 mm Steering radius rear 2,700 mm Steering radius front 1,350 mm Kingpin 3.5” Loading area Loading area (LxW) 11,000 x 2,750 mm telescoping by 4,340 mm in increments up to (LxW) 15,340 x 2,750 mm including rear bevel 500 mm Loading height (loaded) approx. 885 mm (+/-100 mm) or 845 mm (+140/-60 mm) Chassis Wheelbase 5 x 1,510 mm Overhang 1,100 mm Steering 1st axle: fixed 2nd – 6th axles: hydromechanical forced steering (dual-circuit system)

Condition: new, overall weight: 94,000 kg, axle configuration: > 3 axles, Goldhofer SX-L2 2-axle dolly Support legs for parking the unit when unloaded - 3.5" heavy-duty fifth wheel coupling recessed at the top between the main frame longitudinal members - Rear chassis frame with attached unsteered axle with air suspension in the shortest possible compact design - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Twin tires on steel disc wheels - Dual-circuit all-wheel air brakes with diaphragm brake cylinders, spring-loaded parking brake - BPW axles - Air suspension Construction 1 double-stanchion loading platform Stanchion spacing individually adjustable via spindle Removable stanchions Double pockets per carriage 4 stanchions made of square tubes Lashing eyes at the bottom of the platform Slewing ring lock for empty travel Goldhofer 5-axle trailer SN-L5 5 BPW Axle load 5 x 12 tons Gsdpfx Aewcy Dush Tskb Air suspension Smartboard Drawbar 1,500 mm long, 40 mm eyelet Body 1 double-stanchion loading platform Stanchion spacing individually adjustable via spindle Removable stanchions Double pockets per carriage 4 stanchions made of square tubes Lashing eyes at the bottom of the platform Slewing ring lock for empty travel Steering Steering axles on 2 bogies with BPW slewing rings Later axle with self-steering and auxiliary steering for shunting purposes, including radio-controlled operation Hydraulic adjustment from 20-70 m. Display of the selected support span Self-steering can be switched off when driving with the drawbar Auxiliary steering Electro-hydraulic Electro-hydraulic Pump unit Brakes Dual-line pneumatic brake system with 8 diaphragm brake cylinders Designed for a 12-ton axle load each Central lubrication Electric brake valve Lifting and lowering system Radio remote control Connecting cables 2 x 25 m

Condition: used, maximum load weight: 38,200 kg, overall weight: 50,000 kg, axle configuration: 3 axles, first registration: 04/2007, next inspection (TÜV): 05/2027, with air suspension, forced steering, with rear inclination, and loading ramps STZ-L gooseneck - designed loading platform 3,500 x 2,480 mm - inclination: Witgenschräge - ball bearing-mounted fifth wheel plate with replaceable 2" kingpin and adjustable steering wedge - mechanical fifth wheel supports - turning radius 2,300 mm Loading platform - 1 pair of wheel recesses, rotatable after the gooseneck, depth 380 mm, length at the top 2,560 mm - 1 pair of wheel recesses after the 1st axle, depth 250 mm, length at the top 1,500 mm Chassis - air-suspended 3-axle chassis - Gigant axle assembly, consisting of one non-steered axle and two forced-steered steering knuckle axles - lifting and lowering valve Vehicle rear - design with inclination: 500 mm - hydraulic rear support Loading ramps - 1-piece hydraulic ramps with length 2,900 mm, width 720 mm Braking system - 2-circuit all-wheel pneumatic braking system with diaphragm brake cylinders - automatic load-dependent brake (ALB) - automatic slack adjusters (AGS) - parking brake via spring-loaded cylinders - ABS braking system Technical data Gooseneck Loading platform (L x W): 3,500 x 2,480 mm Godozvaaaopfx Ah Tokb Fifth wheel height, loaded: 1,215 mm Loading platform Loading platform (L x W): 9,100 x 2,500 mm Loading height, loaded: 885 mm (+140/-60 mm) Steering 1st axle: non-steered 2nd axle - 3rd axle: forced-steered Electrical system

Condition: new, empty load weight: 11,800 kg, maximum load weight: 36,700 kg, overall weight: 48,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,550 mm, loading space height: 855 mm, suspension: air, tire size: 245/70 R17.5, color: grey, Equipment: ABS, Gooseneck, rigid, in a center tube design: -Front corners 90° -Closed outer frame with cutouts for lashing straps -Hole strip for aluminum loading ramps -2" kingpin -Mechanically operated BPW landing gear on the right side in the direction of travel -550 mm long, 8° incline at the end of the gooseneck -3 pairs of lashing rings recessed in the loading area of the gooseneck, 2 pairs of beam pockets 100 x 50 mm in the loading area of the gooseneck Loading platform: -Closed outer frame with cutouts for lashing straps -Fixed front section 360 mm Gkedpozdzunofx Ah Tjb -Floor covering: sheet metal with anti-slip coating -Excavator well incl. elongated holes for load securing -1 pair of permanently installed wheel wells in front of the first axle, 390 mm deep incl. climbing strips in the incline -1 pair of permanently installed wheel wells between the first and second axles, 390 mm deep, incl. climbing strips in the incline -Technically maximum extension of 3,740 mm -Aluminum wheel well cover "Premium", full width 600 mm, can be extended to 3,000 mm with 8 t axle load -Different wheel well depths by using the wheel well cover (depth approx.: 390 mm and 260 mm) -Inclinined vehicle rear 8°, 550 mm length -Sled design for easy attachment and removal of ramps -Mechanical, spring-supported comfort outrigger supports at the rear of the vehicle for support during loading -Continuous mud flap at the rear -1 pair of lashing points LC 10,000 daN in the middle at the start of the loading platform -1 pair of lashing points LC 10,000 daN in the middle in the rear area of the loading platform -7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform 3-axle chassis: -Axle manufacturer BPW ECO Max, air-suspended -Twin tires 245/70 R17.5 with 12 t axle load -Tire pressure monitoring system (TPMS) with tire pressure sensors mounted on the rim -2 axles with hydraulic forced steering and 1 rigid axle -Braking system manufactured by Knorr (according to EU regulations with EBS-E) -TIM G2 from Knorr (Trailer Information Module) -Vehicle stability control RSS (Roll Stability Support) -Standard second loading height at 895 mm (-100/+100) -Operation of the trailing steering system via a wireless remote control or button on the gooseneck, incl. single-axle function -Load-dependent lift axle on the first axle incl. starting aid (forced lowering of the lift axle possible via TIM) Ramps, 2-piece: -L x W 4,300 x 800 mm -Load capacity 38 t; floor covering: larch -Integrated mechanical locking mechanism in the ramp lifting cylinder to secure the ramps in the transport position -Ramp operation: lifting and shifting hydraulically -The wireless remote control for controlling the trailing steering system can also be used to control the rear functions -Electro-hydraulic unit for ramp operation Included accessories: -Headboard incl. parking position for rear panel, approx. 400 mm high -Spare wheel holder standing at the front of the gooseneck, incl. spare wheel -Chocks incl. holder -Beams for widening to 3,000 mm -Aluminum plug-in side boards 400 mm high, consisting of 2 side boards, each approx. 3,150 mm long, and rear side board with beams (galvanized) -2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and socket for flashing beacon -One plug-in partition plate at the end of the excavator well -Traffideckgo rubber covering, 8 mm construction height in the outer area of the loading platform including rear incline, without fixed loading platform section in the

Condition: used, first registration: 08/1998, total length: 16,000 mm, total width: 2,550 mm, Year of construction: 1998, GOLDHOFER STZ-TL 3-33/80 3-axle low-bed (gooseneck) semi low-loader with 3 steering axles, with lowerable platform and hydraulic ramps TRAILER HAS BEEN SANDBLASTED AND PAINTED!! • ABS • 3 x BPW ECO-Plus air suspension axles • 3 x steering axles • lifting/lowering system • hydraulic, 2-part access ramps • hydraulically lowerable platform • extendable to 3 m width • warning signs • NATO connector for the electric/hydraulic pump • overall length: 16,000 mm • empty weight: 15,900 kg • GVW: 48,000 kg (technically possible: 48,000 kg) Gkjdjwpknwjpfx Ah Tjb • payload: 32,100 kg • 4 x axle load gauges • twin tires: 235/75 R17.5 - TÜV / inspection and SP: !! new !! - German vehicle! Subject to errors and prior sale!

Condition: used, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 03/2007, total width: 2,550 mm, Equipment: ABS, Vehicle identification number: WG0STZV3570028560 First registration: 03/30/2007 German TÜV inspection due Gjdpfxezcr Sio Ah Tokb Tare weight: 14,950 - 18,600 kg Gooseneck detachable Kingpin 3.5" ----Low-bed length: 8,000 mm - Loading height: approx. 250 - 350 mm TELESCOPIC by 5,600 mm WIDTH-ADJUSTABLE WHEEL WELLS Chassis frame: 4,100 mm Overall length: 16,400 mm Excavator well - Bucket arm well 2 x Central lubrication system BPW Eco axles with drum brakes 3 x Hydraulically steered axles Axle loads 3 x 10,000 kg Gooseneck detachable - Fifth wheel load: 18,000 kg Tires: 235/75 R 17.5 Changes, prior sale, and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a guarantee in the legal sense of a purchase agreement. The description according to the purchase agreement is decisive. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle may be covered with and/or labeled with advertising. Our general terms and conditions of delivery and payment apply.

Condition: used, maximum load weight: 32,460 kg, overall weight: 43,220 kg, axle configuration: 3 axles, first registration: 04/2023, next inspection (TÜV): 01/2027, loading space length: 13,520 mm, loading space width: 2,550 mm, Equipment: ABS, ? "Stepstar MEGA" ? Low construction height ? 3rd axle friction-steered ? Extendable ? Widenable ? Hydraulically laterally adjustable ramps ? Hydraulic support legs ? Fifth wheel height (loaded): 950 mm ? Fifth wheel load: 18.50 t ? Permissible total weight: 43.22 t ? Total train length: 16,470 mm ? Gooseneck length: 3,700 mm ? Steering angle / radius front / rear: 1,845 / 2,100 mm ? Vehicle width: 2,550 mm ? Rear overhang: 2,400 mm ? 2" king pin ? Electric winch from Horntools with 8.00 t pulling force, radio remote control, 26 m steel cable and cable guide ? BPW ECO Max axle manufacturer ? 2 x rigid axle ? 1 x friction-steered axle ? Reverse steering lock for friction-steered axle(s) activated via reverse gear ? Standard second loading height at 820 mm (-100/+100) ? Load platform single telescopic ? Technical maximum extension of 4,465 mm ? Hydraulic support legs at rear of vehicle for stabilisation during loading ? 1 pair of LC 10,000 daN lashing points centrally on the load platform behind the gooseneck Gkjdoyndr Espfx Ah Tsb ? 1 pair of LC 10,000 daN lashing points centrally in the rear area of the load platform ? 8 pairs of LC 10,000 daN lashing points in the outer frame of the load platform ? 7 pairs of 100 x 50 mm stake pockets in the outer frame of the load platform ? Wooden widening boards (larch) ? Ramp, 1-piece ? Length: 3,000 mm ? Width: 800 mm ? Load capacity: 38.0 t ? Ramp operation (lifting and shifting hydraulically) hydraulic ? Electro-hydraulic unit for ramp operation ? Ramp mounted on vehicle ? Ramp operation via wireless remote control ? NATO socket 2-pole 24 V for operating the hydraulic ramp or the winch ? Air connections with Duomatic couplers ? Drum brakes ? ABS ? Air suspension ? EBS ? Landing legs ? Dual tires ? BPW axles All information without guarantee / subject to prior sale.

Condition: used, overall weight: 11,500 kg, first registration: 12/1994, Structure: Very good condition, fully extendable to a total length of 18.5 m. Godpozix Rqefx Ah Tskb

Condition: new, empty load weight: 12,700 kg, maximum load weight: 45,800 kg, overall weight: 58,500 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 855 mm, suspension: air, tire size: 245/70 R17.5, color: grey, Equipment: ABS, Gooseneck, rigid, center tube design: -Front corners 90° -Closed outer frame with cutouts for lashing straps -Hole strip for aluminum approach ramps -2" kingpin -Mechanically operated BPW landing gear on the right side in the direction of travel -550 mm long, 8° slope at the end of the gooseneck -3 pairs of LC 5,000 daN lashing rings recessed in the loading area of the gooseneck -2 pairs of beam pockets 100 x 50 mm in the loading area of the gooseneck Extendable loading platform with two wheel recesses: -Closed outer frame with cutouts for lashing straps -Fixed front section 360 mm -Floor covering: sheet metal with anti-slip coating -Excavator well incl. elongated holes for load securing -1 pair of permanently installed wheel recesses in front of the first axle, 390 mm deep incl. climbing strips in the slope -1 pair of permanently installed wheel recesses between the first and second axles, 390 mm deep, incl. climbing strips in the slope -Technically maximum extension of 3,340 mm -Aluminum wheel recess cover "Premium", full width 600 mm, can be extended to 3,000 mm with 8 t wheel load -Different wheel recess depths by using the wheel recess cover (depth approx.: 390 mm and 260 mm) -Sloping vehicle rear 8°, 550 mm length -Sled design for easy installation and removal of ramps -Mechanical, spring-assisted comfort support legs at the rear of the vehicle for supporting during loading Gsdpezt Ic Rofx Ah Tjkb -Mud flaps at the rear -1 pair of lashing points LC 10,000 daN in the middle of the loading platform behind the gooseneck -1 pair of lashing points LC 10,000 daN in the middle at the start of the loading platform -1 pair of lashing points LC 10,000 daN in the middle in the rear area of the loading platform -7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform -5 pairs of beam pockets 100 x 50 mm in the outer frame of the loading platform Ramps, 2-part: -LxW 4,300 mm x 800 mm -Load capacity 38t; floor covering: larch -Integrated mechanical locking in the ramp lifting cylinder to secure the ramps in the transport position -Ramp operation: lifting and shifting hydraulically -Standard manual control unit for rear function (ramps, supports, shifting) -Wireless remote control for operating the rear functions -Electro-hydraulic unit for ramp operation 4-axle chassis and tires: -Axle manufacturer BPW ECO Max, air-suspended -Twin tires 245/70 R17.5 with 12 t axle load -Tire pressure monitoring system (TPMS) with tire pressure sensors installed on the rim -3x axle with hydraulic Goldhofer forced steering and 1x rigid axle -Braking system manufacturer Knorr (according to EU regulations with EBS-E) -TIM G2 from Knorr (Trailer Information Module) -Vehicle stability control RSS (Roll Stability Support) -Standard second loading height at 895 mm (-100/+100) -Operation of the trailing steering via wireless remote control -Incl. single-track function -Load-dependent lift axle on the first axle incl. starting aid Accessories included: -Headboard incl. parking position for the rear wall, 400 mm high -Aluminum stake sides approx. 400 mm high, consisting of 2x side board, length approx. 3,150 mm and rear stake board with beams (galvanized) -Spare wheel holder on the gooseneck, incl. spare wheel -2 pairs of wheel chocks incl. holder -Beams for widening to 3,000 mm -2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and socket for rotating beacon -A pluggable partition plate at the end of the excavator well -Traffideckgo rubber coating,

Condition: used, maximum load weight: 66,600 kg, overall weight: 96,000 kg, axle configuration: > 3 axles, first registration: 06/2011, STHP-XLE 2+4 (285) with trailing axles Weights, Speed 80 km/h Saddle load 24,000 kg Axle load 6 x 12,000 kg Permissible total weight 96,000 kg Tare weight approx. 29,400 kg Payload approx. 66,600 kg Gooseneck, Length x Width 3,755 mm x 2,480 mm, Saddle height (loaded) 1,300 mm, Deflection radius front / rear 1,280 mm / 2,600 mm, Kingpin 3.5'' Saddle load 24,000 kg 2-axle front chassis, Single tires 285/70 R 19.5 with BPW trailing axles, 12-14 t axle load Steering, Axle arrangement, counter-steered Length 2,577 mm Flatbed bridge, single telescopic design with a separation point at the rear Length x Width 6,500 mm x 2,750 mm, extendable to 3,190 mm Telescopic by 2,900 mm, Overall height 300 mm Godpfx Aezn E Rhoh Tekb Loading height (loaded) approx. 400 mm with 100 mm ground clearance 4-axle rear chassis, Wheelbase 1360 + 1400 mm, Single tires 285/70 R 19.5 with BPW trailing axles, 12-14 t axle load Steering, forced steering Length 5,360 mm Excavator well integrated into the chassis Remote control Central lubrication system

Condition: used, overall weight: 54,000 kg, axle configuration: 3 axles, first registration: 06/2008, Equipment: ABS, Vehicle Identification No.: WG0STZV3580032213 First registered: June 4, 2008 German vehicle inspection due Own weight: 17,500 - 21,000 kg Removable gooseneck King pin 3.5" ----Lowbed length: 7,800 mm - Loading height: approx. 470 mm Telescoping by 4,900 mm Extendable Gkodpfx Aotpr E Tjh Teb WHEEL HOLDS Chassis: 4,100 mm Excavator recess - Digger arm recess Central lubrication system BPW Eco axles with drum brakes with radio control 3 x hydraulically steered axles Axle loads: 3 x 10,000 kg Removable gooseneck - Fifth wheel load: 24,000 kg Tires: 235/75 R 17.5 Subject to change, prior sale, and errors. This description serves as a general identification of the vehicle and does not constitute a warranty under the law of purchase. The description in the purchase contract is decisive. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we would be happy to provide you with an offer from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: used, maximum load weight: 24,000 kg, overall weight: 34,500 kg, axle configuration: 2 axles, first registration: 03/1988, next inspection (TÜV): 06/2026, Gooseneck Length: 3350 mm Width: 2,490 mm Steering radius: 2300 mm Fifth wheel load: 14,500 kg Fifth wheel height: 1,300 mm Low bed Gsdpoxc Dbhjfx Ah Tskb Loading platform length: 4,660 mm incl. 400 mm chamfer Width: 2,500 mm Extendable to 3,000 mm Loading height: 650 mm Chassis Loaded platform height: 900 mm Length: 3,000 mm incl. 800 mm chamfer Width: 2,500 mm Chamfer: 800 mm Rear hydraulic support 2-part hydraulic ramps Length 1: 2,500 mm Length 2: 1,100 mm Width: 720 mm Fifth wheel load: 14,500 kg Rear axle load: 2 x 10,000 kg Gross weight: 34,500 kg Payload: 24,000 kg Kerb weight: 10,500 kg

Condition: used, color: red, Year of construction: 2000, Goldhofer SPN-L3-32/80. Year: 2000. 8-ton BPW axles. Weight: 11,000 kg. Load capacity: 25,000 kg. Maximum weight: 36,000 kg. Kingpin load: 12,000 kg. Air suspension. Mega/Lowbed. 7.3 meters extendable. Wheel wells (internal height: 650 mm). Floor dimensions: Length: 13,500 mm. Width: 2,550 mm. Height: 1,100 mm. Kingpin height: 1,000 mm. Tires: 235/75R17.5, 80% tread. German trailer! 2 units! Gkedpfxozya U Eo Ah Teb ID No: 571. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as to all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = Year of manufacture: 2000 Unladen weight: 11,000 kg Payload: 25,000 kg GVW: 36,000 kg Extendable superstructure: Yes = Company Information = For more information:

Condition: good (used), total length: 6,600 mm, total width: 2,750 mm, Year of construction: 2010, Operation via truck hydraulics Lashing points Hydraulically operated gooseneck Detachable gooseneck Warning signs for overwidth Rear bumper with lighting King pin, 2.0 inches Central lubrication system Floor elements 4 x widening beams Toolbox on the gooseneck Overall length: 15,708 mm – 26,008 mm Loading platform length: 6,600 mm Extension: 4,300 mm Extension beam: 6,000 mm Max. loading platform length: 16,900 mm Loading platform width: 2,750 mm Beam height: 380 mm Gkodpfx Aozxn Nboh Teb King pin height: 1,295 mm / 1,385 mm = Further information = Year of manufacture: 2010 Unladen weight: 17,000 kg Payload: 40,600 kg GVW: 57,600 kg Technical condition: good Optical condition: good Manufacturer: Goldhofer

Condition: new, maximum load weight: 87,500 kg, overall weight: 120,000 kg, axle configuration: > 3 axles, os 1. Type STZ-VP 8 (245) (3+5) with pendulum axles The specified technical data is only valid when used with a 4-axle tractor unit with the following specifications: Dimension a: 5,400 mm Fifth wheel height (loaded): 1,300 mm Weights Speed 80 km/h Fifth wheel load 22,000 kg-30,000 kg Axle load 8 x 12,000 kg GVWR 120,000 kg Own weight approx. 32,500 kg Payload? Approx. 87,500 kg (depending on the load diagram / easyLOAD calculation) Dimensions: Dimension b 21,990 mm - 26,490 mm, Total combination length: Vehicle width 2,750 - 3,000 mm Gooseneck length x width: 3,700 mm x 2,480 mm, Fifth wheel height (loaded): 1,300 mm, Turning radius front / rear: 1,370 mm / 2,835 mm, Kingpin: 3.5" 3-axle chassis, front wheelbase: 2 x 1,510 mm, Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S Steering: Axle arrangement (counter-steered) Excavator bed: Single telescopic Length x width: 7,000 mm x 3,000 mm · Telescopic by / to max. 4,500 mm / 11,500 mm. Overall height 450 mm. Loading height when loaded: approx. 600 mm with 150 mm ground clearance. Stick width 1,350 mm. Mattresses and outriggers removable. 5-axle chassis, rear. Wheelbase 4 x 1,510 mm. Single tires: Continental, 245/70 R 17.5 143/141 L (146/146 F) M+S. Steering: Forced steering. Gsdpfowc Inhox Ah Tekb Radio remote control.

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, loading space length: 16,200 mm, loading space width: 2,750 mm, loading space height: 960 mm, total length: 16,200 mm, total width: 2,750 mm, suspension: hydraulics, tire size: 235 / 75 R17.5, color: blue, Year of construction: 2009, Details Chassis number: WSTZH8D90030493 Type: Trailers Year: 2009 Brand: Goldhofer Additional information Main Features Manufacturer: Goldhofer Type: STZ H8-82-80A Chassis number: WSTZH8D90030493 Year: 2009 Weights King-Pin load: 26,000 kg Axle load: 10,000 kg Total axle load: 8 x 10,000 kg = 80,000 kg GVW: 106,000 kg Empty weight: 23,480 kg Loading capacity: 82,520 kg Axles Brand axles: BPW Hydraulic suspension WABCO braking system with EBS ABS 1st axle friction steering 2nd axle rigid Axles 3 to 8 hydraulic steering Axle 1 & 2 liftable Tyres: 235 / 75 R17.5 Dimensions Length: 16,200 mm Extensions: 8,300 mm Max extended length: 24,500 mm Loading floor length: 12,300 mm to 20,600 mm Loading floor width: 2,750 mm Loading floor height: 955 mm King-Pin height: +/- 1,280 mm Additional Information Operated on truck hydraulics Hydraulic operated gooseneck Lashing rings Stake pockets Wooden loading floor Mechanical landing gear Toolbox in gooseneck King-pin 3.5” Central greasing Markerboards oversize load Radio remote control = Further information = General Information Year of manufacture: 2009 Axle configuration Tire size: 235 / 75 R17.5 Axle brand: BPW Suspension: hydraulic suspension Rear axle 1: Twin tires; Lift axle; Max. axle load: 10,000 kg; Steered Rear axle 2: Twin tires; Lift axle; Max. axle load: 10,000 kg Rear axle 3: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 4: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 5: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 6: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 7: Twin tires; Max. axle load: 10,000 kg; Steered Rear axle 8: Twin tires; Max. axle load: 10,000 kg; Steered Weights Empty weight: 23,480 kg Payload: 82,520 kg GVW: 106,000 kg Functional Loading floor height: 96 cm Extendable structure: Yes Condition Technical condition: very good Gkodpfxowwkrls Ah Tjb Optical condition: very good Financial Information Price: On request

Condition: used, maximum load weight: 85,100 kg, overall weight: 106,000 kg, axle configuration: > 3 axles, first registration: 11/2009, loading space length: 19,390 mm, loading space width: 2,470 mm, total width: 2,550 mm, total height: 1,950 mm, Equipment: ABS, Technically possible: 8 x 14 t axles, ABS, EBS, BPW axle(s), lift axles, hydraulic suspension, 6 hydraulically steered axles, 1st + 2nd axle are lift axles, drum brake system, 13 heavy-duty lashing rings per side, 8 stake pockets per side, 2 central stake pocket rails on the loading area, rotating beacon at the rear, towing coupling, loading height: approx. 1500 mm. Vehicle may feature advertising decals and/or signage. Gjdpfx Asv I It Nsh Tekb SI82739 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer through our partner workshops! Vehicle may feature advertising decals and/or signage. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: excellent (used), Year of construction: 2025, 1x Goldhofer THP / ADD 2.0 6 / 12 x 08 S Year of manufacture: 2025 Chassis number (VIN): WG0THPA68N0062326 Mileage: Only a few test kilometers Axle load: 36,000 kg per axle line Steering angle: 55° Axles: BPW Gksdpfx Ajzyllpjh Teb Tires: Michelin 215 / 75 R 17.5 Braking system: EBS braking system Steering: Hydromechanical steering 1x Goldhofer THP SL 6 Split Year of manufacture: 2025 Chassis number (VIN): WG0THPS64N0042341 Mileage: Only a few test kilometers Axle load: 45,000 kg per axle line Steering angle: 55° Axles: BPW Tires: Michelin 215 / 75 R 17.5 Steering: Hydromechanical steering 1x Goldhofer PowerPack Unit / ADD – 530 / 3000 Year of manufacture: 2025 Serial number: 62327-00 Engine type: Deutz 6-cylinder diesel engine, 390 kW / 530 hp Operating hours: Only 32 hours! Emission stage: EU Stage V Operation: Radio remote control! = Further information = Year of manufacture: 2025 Technical condition: very good Optical condition: very good Price: Upon request Manufacturer: Goldhofer

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, suspension: air, tire size: 245/70R17,5, color: red, Year of construction: 2015, = Additional Options and Accessories = - Air suspension - Central lubrication system = Notes = Goldhofer STZ-VL4-51/80A. Year: 2015. 10 tons BPW axles. Weight: 21,500 kg. Load capacity: 52,500 kg. Max weight: 74,000 kg. Kingpin load: 34,000 kg. 5 meters extendable. Hydr. detachable gooseneck. Air suspension. Aluminum decking on neck. Central lubrication system. Spare tire. Radio remote control. Hydraulic system works with NATO connection + hydraulic system from the truck. EBS ABS ALB. Tires: 245/70R17.5, 70-90% tread. Dimensions: Neck: L: 4700 mm. W: 2500 mm. H: 1900 mm. Kingpin height: 1350 mm. Floor: L: 8000 mm. W: 2750 mm. H: 500 mm. Floor thickness: 350 mm. Rear trailer: L: 5600 mm. W: 2750 mm. H: 1030 mm. Dolly SX-L2-34/80. Year: 2015. 10 tons BPW axles. Weight: 3700 kg. Max weight: 38,000 kg. Kingpin load: 18,000 kg. Air suspension. Tires: 245/70R17.5, 70-90% tread. 3 units available! ID No: 659. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as to all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = General Information Year of Manufacture: 2015 Axle Configuration Tire Size: 245/70R17.5 Axle Brand: BPW Suspension: Air suspension Gksdpfjznb Icsx Ah Tsb Rear Axle 1: Double tires; Max. axle load: 10,000 kg; Steerable; Tire tread (left, inside): 70%; Tire tread (left, outside): 70%; Tire tread (right, inside): 70%; Tire tread (right, outside): 70% Rear Axle 2: Double tires; Max. axle load: 10,000 kg; Steerable; Tire tread (left, inside): 80%; Tire tread (left, outside): 80%; Tire tread (right, inside): 80%; Tire tread (right, outside): 80% Rear Axle 3: Double tires; Max. axle load: 10,000 kg; Steerable; Tire tread (left, inside): 80%; Tire tread (left, outside): 80%; Tire tread (right, inside): 80%; Tire tread (right, outside): 80% Rear Axle 4: Double tires; Max. axle load: 10,000 kg; Steerable; Tire tread (left, inside): 90%; Tire tread (left, outside): 90%; Tire tread (right, inside): 90%; Tire tread (right, outside): 90% Weights Unladen weight: 21,500 kg Payload: 52,500 kg GVW: 73,999 kg Condition Technical condition: good Optical condition: good = Company Information = For more information:

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 45 kg, permissible axle load (axle 2): 45 kg, permissible axle load (axle 3): 45 kg, loading space width: 3,000 mm, loading space height: 1,170 mm, total width: 3,000 mm, total height: 1,170 mm, suspension: hydraulics, tire size: 215/75R17.5, wheelbase: 1,500 mm, color: red, Year of construction: 2026, Main Features Year: New Universal Gooseneck SH 35/2 Loading platform: 3,700 mm x 2,440 mm 3.5 inch king pin Hydraulic lifting and lowering Hydraulic support cylinders Coupling height: 1,450 mm Integrated lashing points Lashing rings Spare wheel + spare wheel holder Hydraulic locking pin Automatic lubrication for gooseneck with Beka-MAX pump Hatz Diesel PPU Hatz single-cylinder diesel engine (silent pack) @ 9.6 kW 240 L hydraulic oil tank, powder coated 35 l/min flow rate and max. working pressure of 250 bar Three sizes of quick couplers for pressure connection Three sizes of quick couplers for tank connection Electric RPM control THP SL 3 Max. axle load: 45,000 kg per axle Total axle load: 3 x 45,000 kg = 135,000 kg GVW: 135,000 kg Unladen weight: 10,650 kg Payload: 124,350 kg Total length: 4,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 4 Max. axle load: 45,000 kg per axle Total axle load: 4 x 45,000 kg = 180,000 kg GVW: 180,000 kg Unladen weight: 13,850 kg Payload: 166,150 kg Total length: 6,000 mm Godex S Evbspfx Ah Tokb Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 5 Max. axle load: 45,000 kg per axle Total axle load: 5 x 45,000 kg = 225,000 kg GVW: 225,000 kg Unladen weight: 17,250 kg Payload: 207,750 kg Total length: 7,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 6 Max. axle load: 45,000 kg per axle Total axle load: 6 x 45,000 kg = 270,000 kg GVW: 270,000 kg Unladen weight: 19,800 kg Payload: 250,200 kg Total length: 9,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) Low Profile Deck FB 300 - 10,000 mm, without mechanical coupling, non-driveable - Payload rating in combination (6+6): 300 t - Height 300 mm, length 10,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - Bogies for modular configuration - Dead weight approx. 21,300 kg - Incl. hydraulic locking pin for connecting modular bogies lengthwise 1 x Low Profile Deck FB 250 - 8,000 mm, with mechanical coupling, non-driveable - Payload rating in combination (6+6): 170,000 kg - Height 250 mm, length 8,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - 1x extension for low profile deck, 4,000 mm - 1x extension for low profile deck, 5,000 mm General Information Year of construction: 2026 Axle Configuration Tyre size: 215/75 R17.5 Axle brand: BPW Eco Plus Suspension: hydraulic suspension Center axle 1: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 2: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 3: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 4: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 5: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 6: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Functional Deck height: 117 cm Extendable chassis: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Damages: none Financial Information...

Condition: used, axle configuration: > 3 axles, first registration: 01/1985, total width: 3,780 mm, total height: 3,330 mm, Special low-loader for heavy transport, payload approx. 60,000 kg to 80,000 kg depending on application, whether for road or internal use. Loading platform length with slope approx. 12,400 mm, width 3,200 mm, extendable to 3,700 mm. Hydraulic axle compensation, hydromechanical steering on 6 axles (front and rear), 4 x hydraulic support cylinders, hydraulic ramp at front and rear, loading possible from both sides, towing hitch on both sides. Ideal for shunting or transport in very confined spaces. The vehicle may have advertising and/or signage applied. Gedpfxeyc Amdj Ah Tjkb

Condition: excellent (used), first registration: 08/2008, color: green, Year of construction: 2008, Extendable body: Yes Gjdeykz Uiopfx Ah Tekb Technical condition: very good Visual condition: very good

Condition: good (used), axle configuration: > 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, suspension: air, tire size: 245/70R17,5, color: red, Year of construction: 2015, = Additional options and accessories = - Air suspension - Central lubrication system Godpfx Ajznb Amsh Tokb = Notes = Goldhofer STZ-VL4-51/80A. Year: 2015. 10-ton BPW axles. Weight: 21,500 kg. Load capacity: 52,500 kg. Max. weight: 74,000 kg. Kingpin load: 34,000 kg. 5-meter extendable. Hydr. detachable gooseneck. Air suspension. Aluminum boards on neck. Central lubrication system. Spare tire. Radio remote control. Hydraulic system operates on NATO + hydraulic system from the truck. EBS ABS ALB. Tires: 245/70R17.5, 70%. Dimensions: Neck: L: 4700 mm. W: 2500 mm. H: 1900 mm. Kingpin height: 1350 mm. Floor: L: 8000 mm. W: 2750 mm. H: 500 mm. Floor thickness: 350 mm. Rear of trailer: L: 5600 mm. W: 2750 mm. H: 1030 mm. Dolly SX-L2-34/80. Year: 2015. 10-ton BPW axles. Weight: 3700 kg. Max. weight: 38,000 kg. Kingpin load: 18,000 kg. Air suspension. Tires: 245/70R17.5, 70%. 3 units available! ID No.: 635. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as all agreements entered into by Heinhuis and the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = General information Year of manufacture: 2015 Axle configuration Tire size: 245/70R17.5 Axle brand: BPW Suspension: Air suspension Rear axle 1: Dual tires; Max. axle load: 10,000 kg; Steerable; Tire tread depth (left, inner): 70%; Tire tread depth (left, outer): 70%; Tire tread depth (right, inner): 70%; Tire tread depth (right, outer): 70% Rear axle 2: Dual tires; Max. axle load: 10,000 kg; Steerable; Tire tread depth (left, inner): 80%; Tire tread depth (left, outer): 80%; Tire tread depth (right, inner): 80%; Tire tread depth (right, outer): 80% Rear axle 3: Dual tires; Max. axle load: 10,000 kg; Steerable; Tire tread depth (left, inner): 70%; Tire tread depth (left, outer): 70%; Tire tread depth (right, inner): 70%; Tire tread depth (right, outer): 70% Rear axle 4: Dual tires; Max. axle load: 10,000 kg; Steerable; Tire tread depth (left, inner): 70%; Tire tread depth (left, outer): 70%; Tire tread depth (right, inner): 70%; Tire tread depth (right, outer): 70% Weights Unladen weight: 21,500 kg Payload: 52,500 kg GVW: 73,999 kg Condition Technical condition: good Optical condition: good = Company information = For more information:

Condition: used, maximum load weight: 35,040 kg, overall weight: 45,500 kg, axle configuration: 3 axles, first registration: 04/2022, next inspection (TÜV): 04/2027, loading space length: 16,270 mm, loading space width: 2,550 mm, loading space height: 855 mm, total length: 16,560 mm, total width: 2,550 mm, total height: 855 mm, Year of construction: 2022, Equipment: ABS, 3-axle low-bed trailer GOLDHOFER Stepstar with TELESCOPIC EXTENSION First registration 04/2022, from first owner!! Saddle load up to max. 18,000 kg Permissible total weight (technical) 45,500 kg Length of gooseneck 3,700 mm Length of low-bed 9,300 mm + telescopic extension 3,340 mm = 12,640 mm Loading height 855 mm (-60/ +140 mm) Second loading height 895 mm (-100/+100 mm) Vehicle width 2,550 mm Excavator well length (L x W x H) 3,850 x 760 x 310 mm Wheelbase 2,250 and 1,410 mm 1-piece mechanical aluminum ramps with spring support, load capacity 24,000 kg, length 2,500 mm, width 450 mm Slider design for easy installation and removal of the ramps 1 pair of fixed wheel recesses in front of the first axle, 390 mm deep, incl. climbing strips in the slope 1 pair of fixed wheel recesses between the first and second axles, 390 mm deep, incl. climbing strips in the slope Aluminum wheel recess covers "Premium", full width 600 mm, extendable to 3,000 mm with 8,000 kg axle load Godpfxezz Unco Ah Tekb Different wheel recess depths by using the wheel recess covers (depth approx. 390 and 260 mm) Angled vehicle rear end 8° over a length of 550 mm Downpipe outlet at the vehicle rear Frame finishing with corrosion-resistant zinc dust primer + cavity sealing BPW axles ECO Max Drum brakes 1st axle LIFT AXLE 3rd axle trailing steering KNORR trailer EBS with RSS driving stability control KNORR trailer information module Lighting completely LED 1 pair of additional reversing lights at the rear Load securing, gooseneck: 3 pairs of lashing rings 5,000 kg 2 pairs of side rail pockets Load securing, low-bed: 1 pair of lashing points 10,000 kg in the center of the loading area behind the gooseneck 1 pair of lashing points 10,000 kg in the center of the rear area 6 pairs of lashing points 10,000 kg in the outer frame 6 pairs of side rail pockets in the outer frame Condition 1A, very well maintained RENTING is the new BUYING; with us, it is also available immediately in a full-service rental agreement.

Condition: used, color: red, Year of construction: 2000, Goldhofer SPN-L3-32/80. Year: 2000. 8-ton BPW axles. Weight: 11,000 kg. Load capacity: 25,000 kg. Maximum weight: 36,000 kg. Kingpin load: 12,000 kg. Air suspension. Mega/Lowdeck. 7.3 meters extendable. Gksdszyb Dhopfx Ah Tob Wheel recesses (internal height: 650 mm). Floor dimensions: Length: 13,500 mm. Width: 2,550 mm. Height: 1,100 mm. Kingpin height: 1,000 mm. Tires: 235/75R17.5, 80% tread. German trailer! 2 units! ID No.: 497. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of manufacture: 2000 Unladen weight: 11,000 kg Payload: 25,000 kg GVWR: 36,000 kg Extendable superstructure: Yes = Company information = For more information: