Used lowboy semi-trailers / low loaders for sale (381)

Condition: used, overall weight: 95,000 kg, axle configuration: > 3 axles, first registration: 08/2015, Equipment: ABS, Vehicle identification number: XNJ65H5UA15H01099 HYDRAULIC SUSPENSION – Independent wheel suspension (SL1) Electrohydraulics with NATO socket First registration: 07.08.2015 German MOT (HU) valid until 08/2026 – Safety Inspection (SP) until 02/2026 Unladen weight: 20,520 kg Total length: 15,130 – 19,630 mm Gooseneck dimensions: 4,100 mm – Kingpin: 3.5 inches Low bed length: 11,108 x 2,750 mm – Loading height approx. 880 mm EXTENDABLE by 4,500 mm Axle loads: 6 x 12,000 kg Fifth wheel load: 23,000 kg Broshuis axles = SL axles with drum brakes Axles 2, 3, 4, 5, 6 = hydraulically forced-steered axles with radio remote control Axles 1, 2, 3 = liftable Axle 1 = fixed Hydraulic height- and width-adjustable ramps – length 2,500 + 2,000 mm – width 900 mm Bdedpfxsyb U Tto Ap Ijc Central lubrication system Hot-dip galvanized Tyres: 245/70 R 17.5 Spare wheel holder WITHOUT spare wheel Subject to change, prior sale, and errors excepted. The description serves the general identification of the vehicle and does not constitute any warranty in terms of sales law. The contractually agreed description is binding. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is desired, we are happy to provide an offer from our partner workshops! The vehicle may be covered with promotional decals and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: used, overall weight: 76,500 kg, axle configuration: > 3 axles, first registration: 12/2004, Equipment: ABS, Vehicle Identification No.: WG0STZH5A40025628 HYDRAULIC SUSPENSION Electrohydraulics - NATO Socket Fifth Wheel Load: 20,000 kg - Axle Loads: 5 x 11,300 kg - Gross Weight: 76,500 kg Unladen Weight: 18,500 kg German inspection (HU) due Gooseneck: 4,100 mm Coupling Height: 1,350 - 1,380 mm = 3.5 inches Lowbed: Length: 8,430 mm (of which 530 mm are bevelled) -- Width: 2,545 mm -- Loading Height: 880 - 920 mm Extendable by 5,275 mm with sliding deck Widenable WITHOUT timber Hydraulic ramps (height + width-adjustable), split - 2,700 + 1,500 mm - Width 850 mm Excavator well Technical axle loads 5 x 11,300 kg BPW Eco axles with drum brakes AXLES 1, 2 = LIFTABLE Axles 5, 6 = SELF-STEERING Bodsy Sqr Uepfx Ap Iodc Central lubrication system Tyres: 245/70 R 17.5 Modifications, interim sale, and errors are expressly reserved. The description serves solely for the general identification of the vehicle and does not constitute a warranty in the legal sense of sales law. The specifications in the purchase contract are decisive. Our offer is generally without new TÜV inspection. If a new TÜV inspection is required, we will be happy to provide you with an offer from our partner workshops! The vehicle may be stickered or lettered with advertising. Our general terms and conditions of delivery and payment apply.

Condition: used, maximum load weight: 38,230 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 05/2026, loading space length: 8,500 mm, loading space width: 2,520 mm, Müller-Mitteltal Low Loader with Wheel Wells TS 3 RM ML 30.0, 2 Loading Heights and Ramps * Kingpin load increase from 12 t to 18 t included. Kingpin mounted in: second kingpin position 2", kingpin up to and including gooseneck 2,750 mm. Rear swing clearance approx. 2,400 mm (min. 150 mm clearance recommended). Front swing clearance 1,480 mm or 1,570 mm with spare wheel. Note: Sufficient clearance between tractor unit and trailer to be ensured by the customer. Bedpfx Apoy R Ipus Isdc * Extendable components in the front and rear wheel wells (205 mm deep). 6 planks for wheel wells, bracket mounting as per code 09.112. ALU air tank instead of steel. * Smartboard control box mounted on the trailer as information tool with pressure sensors, finally for total axle load display. Indication possible either at the control box or in the truck via the EBS air suspension system (depending on truck manufacturer). * ?SP combination package: toolbox with 45° corners in galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, on the platform. W: 2,480 × H: 500 mm, with top hinged lid, side doors, and slanted left side. ALU side walls foldable to saddle platform (500 mm high), ALU rear wall insertable (150 mm high), inside and outside drop sides painted RAL 9006 white aluminum. Including foldable & removable rear stanchions, galvanized (without additional coating). Including bolted front structure. Length from front crossmember to gooseneck 3,935 mm. Front swing clearance, without spare wheel at gooseneck 2,450 mm or 2,750 mm approx. 1,750 mm or 1,480 mm. * 2 container locks, recessed in the front crossmember * 3 storage compartments under the platform for either ALU loading ramps or wooden planks for wheel well covers * Folding/extending outriggers (galvanized) and wooden planks for widening included (not on rear slope), plank bracket on the platform (maximum cargo track width 2,500 mm) * Second LED position light on the warning package (front and rear, dual lighting), only available with warning package * 2 LED reversing lights at the rear of the trailer, controlled via reverse gear (suitable for 12 V and 24 V), maximum 2 additional allowed in total * 7-pin socket at the rear, wired for overlength lighting with tail light (58 R) and ground * Rubber covering on left and right ramp slopes (approx. 860 mm long), 190 07644 rubber strips on the inside plank of the one-piece ramps * Fully automatic central lubrication system with pump (24V), grease container, and integrated trailer control, without connection to ramps (on steered version: including connection of distributor on platform). Note: Only compatible with towing vehicles with 24V lighting system! Subject to prior sale and errors! Sale exclusively under our general terms and conditions. Important Note: Despite careful verification of all details in our offer, errors may occur. In some cases, such errors are due to transmission errors in the systems of different platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal entitlement. Legal Notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it is for information purposes regarding contract initiation. The information provided here is given without guarantee and does not constitute a binding commitment.

Condition: used, empty load weight: 5,780 kg, maximum load weight: 20,920 kg, overall weight: 26,700 kg, axle configuration: 2 axles, first registration: 06/2011, next inspection (TÜV): 06/2024, loading space length: 7,200 mm, loading space width: 2,500 mm, loading space height: 3,200 mm, suspension: air, wheelbase: 1,300 mm, Year of construction: 2011, gearing type: other, driver cabin: other, Equipment: ABS, * German semi-trailer * 1st owner * Special low-loader trailer from premium manufacturer Meusburger * Model MPG - 2 * Superstructure with sliding roof device * Enables side loading * Also allows loading from above and rear * Ideal for transporting heavy goods, equipment, construction machinery, vehicles, etc. * 21 t payload * 3x 4.2 t load capacity Altec loading ramps * Ramp compartment Bodpfx Aperkn R Tj Iedc * Sliding tarpaulin left & right with Edscha sliding roof * Platform length: 7.20 m x 2.50 m x 3.20 m * Loading height: 0.80 m * Platform front loading height: 1.60 m * Length: 3.30 m x 2.50 m x 2.35 m * Wooden loading floor with DIN lashing rings * Aluminium portal doors * BPW Eco Plus axles * Air suspension + raising/lowering * 2 x extendable storage boxes * ABS/EBS * GVW: 26,700 kg * Unladen weight: 5,780 kg * Payload: 20,920 kg * Kingpin to front dimension: 1.45 m * Diagonal kingpin to front: 1.75 m * Kingpin to rear dimension: 9.35 m If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods to ensure there are no misunderstandings regarding their condition and suitability. Viewings and inspections are possible anytime upon appointment and are expressly desired. All information is provided without guarantee. We do not accept liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: used, maximum load weight: 37,550 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2009, Flyer with air suspension and hydraulic dual-circuit forced steering (turntable). Dimension B: 11,900 - 19,600 mm Unladen weight: 10,450 kg Loading Platform - Design: "Flatbed" with single-stage telescoping - Mechanical landing legs Bsdoy Sd Enopfx Ap Ijdc - 90° front corners, closed outer frame - Integrated articulation at the front of the frame - Fifth wheel plate with ball bearing turntable, interchangeable 2" kingpin, and adjustable steering wedge - Heavy-duty rear crossmember serving as underrun protection Chassis - 3-axle chassis with air suspension incl. raise/lower valve - BPW axles Braking System - Dual-line all-wheel pneumatic braking system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-actuated cylinders - ABV (ABS) Loading Platform LxW: 13,500 x 2,480 mm Telescopable by +7,700 mm up to 21,200 mm Loaded platform height: 1,380 mm At loaded coupling height: 1,200 mm Steering radius to rear: 2,350 mm Fifth-wheel load: 18,000 kg

Condition: used, maximum load weight: 63,900 kg, overall weight: 96,000 kg, axle configuration: > 3 axles, first registration: 07/1996, Vehicle Description: Eurocompact (2+4) excavator low bed trailer with pendle axles Coupling height (loaded): 1,300 mm Tyres: completely new Trailer in very good technical and visual condition Weights and Speed (80 km/h) King pin load: 24,000 kg Axle load: 6 x 12,000 kg Gross permitted weight: 96,000 kg Tare weight: approx. 32,100 kg Payload: approx. 63,900 kg Gooseneck – Length x Width: 2,700 mm x 2,480 mm Coupling height (loaded): 1,300 mm Rear steering radius: 2,450 mm King pin diameter: 3.5'' King pin load: 24,000 kg Front 2-axle running gear with prism well Wheelbase: 1,500 mm, single tyres, SAF pendle axles Steering: counter-steered axle arrangement Dimensions: 3,000 mm x 2,740 mm Tyres: 285/70 R17.5 Excavator bed, single telescopic Length x Width: 5,800 mm x 1,350 mm, with folding outriggers and mats Base width: 2,740 mm, expandable to 3,240 mm Telescopic by 4,000 mm to a total of 9,800 mm in the low bed Excavator bed height: 440 mm Loaded bed height: approx. 540 mm with 100 mm ground clearance Bed height with rotated outriggers: 450 mm with 100 mm ground clearance Rear 4-axle running gear with prism well Wheelbase: 3 x 1,500 mm, single tyres, SAF pendle axles Steering: forced-steered axle arrangement Dimensions: 6,500 mm x 2,740 mm Bdodpjy Sd Eusfx Ap Ijc Tyres: 285/70 R17.5 Remote control

Condition: new, maximum load weight: 31,400 kg, overall weight: 45,000 kg, axle configuration: 2 axles, loading space length: 6,800 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 300 mm, Year of construction: 2026, Equipment: ABS, DOLL NEXT DOLL NEXTLowbed tera T2P-S3FS21 – 2-axle lowboy trailer from the rapidly available rapid series by DOLL Fahrzeugbau GmbH, Oppenau – straight from the heart of the Black Forest. Ideal for demanding applications in tough off-road environments, challenging terrain, and for daily use on construction sites. Depending on availability, very fast delivery and operational readiness thanks to DOLL's rapid series production. Individually configurable according to your specific requirements and wishes. Technical Data * Permissible Gross Weight: 45,000 kg * Unladen Weight: approx. 13,600 kg * Payload: approx. 31,400 kg * Running gear: 2 x 12t pendulum axles * Extendable lowbed * Vehicle width: 2,550 mm * Load height (loaded): 300 mm * Wheelbase: 1,360 mm Equipment Features * Detachable gooseneck for significantly easier and faster loading and unloading * Smooth telescoping for efficient handling * High-quality spray galvanization for optimal corrosion protection and reduced downtime * Powder-coated and hot-dip galvanized attachments: robust and durable – no rust Your Key Benefits at a Glance * Rapid availability * Robust & reliable – proven technology, ideal even in demanding conditions * Made in Germany – manufactured by DOLL Fahrzeugbau GmbH in Oppenau, a company with over 145 years of experience in premium vehicle engineering Smart Technologies Our innovative approach combines quality, performance, and cost-effectiveness at the highest level. The rising demand for our lowbed semi-trailers drives the continuous development of state-of-the-art technologies in series production. Bdjdpfxoyytm Rj Ap Ioc Contact & Location Manufactured by DOLL Fahrzeugbau GmbH, Industriestraße 13, 77728 Oppenau (headquarters and production site) * The vehicles can be demonstrated either at the factory or at selected reference customers across Germany, together with one of our field sales representatives, depending on customer location.

Condition: used, functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 29,000 kg, overall weight: 38,000 kg, first registration: 08/2020, color: red, Year of construction: 2020, ES-GE 2-axle low-bed, non-telescopic, Tridec steering Total weight: 38,000 kg Aggregate load (2 x 10,000 kg): 20,000 kg Fifth wheel load: 18,000 kg Unladen weight +/- manufacturer's tolerance: approx. 9,000 kg Bodpfx Apeu U Np To Iedc Payload: approx. 29,000 kg Overall length: approx. 13,650 mm Overall width: approx. 2,540 mm Length of loading area: approx. 13,200 mm Width of loading area: approx. 2,540 mm Front overhang: approx. 1,200 mm Front radius: approx. 1,750 mm Swing-through radius SZM: approx. 2,100 mm Saddle height: approx. 1,150 mm B dimension: approx. 12,000 mm Length of high bed: approx. 3,700 mm Loading height high bed: approx. 1,480 mm Length of low bed: approx. 6,500 mm Loading height low bed: approx. 250 mm Ground clearance low bed: approx. 100 mm Loading height above axle unit: approx. 3,000 mm Specification SZM A dimension: approx. 4,500 mm Semi-mounted height: approx. 1,150 mm Swing-through radius: approx. 2,100 mm Chassis: - Chassis made from high-quality fine-grained steels - Drop deck in rigid design - Axle unit cannot be lowered - Without excavator trough King pin -2" kingpin Supports - without front jacks Axles - 2 x 10,000 kg axles (17.5"), techn. 12,000 kg each - Gigant make - Closed drum brake. Asbestos-free brake linings - Automatic slack adjusters. Center centering - Center distance approx. 1,360 mm Suspension - Air suspension with lifting and lowering - 2nd ride height for air suspension (+ approx. 30 mm) Steering - Hydraulic stub axle steering - All axles are steered. Make "Tridec" Tires - 9 tires 245/70 R 17.5 with load index 146/146 F - Continental tires - Steel rims Brake - Dual-circuit air brakes in accordance with EC directive, make "Knorr" - Automatic load-dependent brake force control - Controlled via standard red/yellow air clutches in accordance with ISO 1726 - Electronic brake, "EBS", 7-pin socket in accordance with ISO 7638, mounted at the front, in accordance with EU directives. WITH ABS 4S/2M - With RSS (Roll Stability Support) - Parking brake by means of spring-loaded cylinder - 4 wheel chocks with holder - Without connecting hoses (reversible flex) to the tractor unit - Aluminum air reservoir - TIMG2 (Trailer Information Module) fitted to read out the current axle loads Underride guard - Integrated in the rear end plate Side frame - Side frame made of UNP steel approx. 200 mm Load securing - 13 lashing points per side with 13,400 kg tensile force, can be folded outwards, mounted in the outer frame - 1 pair of lashing rings with approx. 13,400 kg lashing force in the rear area of the gooseneck, approx. 400 mm from the floor - 1 pair of lashing rings with a tensile force of approx. 13,400 kg at the rear in the low bed on the vertical neck - 7 stake pockets per side on the inside of the outer frame, for stakes approx. 80x50x4 mm, evenly distributed in the outer frame over the entire length of the cargo bed - 6 stake pockets welded to the outside of the side member on each side Floor - Approx. 28 mm thick hardwood floor with omega profiles, laid between the side members - Tear plate (approx. 8/10 mm) over the axle unit Front wall - Designed as a storage box with lid, approx. D 400 x H 450 mm, across the entire width of the loading area, beveled corners Drop sides - 3 plug-in anodized drop sides on the gooseneck, approx. 2,440 x 400 mm - Rear stanchions, galvanized Galvanization - Steel blasting of all iron parts - Galvanizing of the chassis Painting - Priming and single-color painting in RAL 3002 chi

Condition: good (used), functionality: fully functional, empty load weight: 7,800 kg, maximum load weight: 37,200 kg, overall weight: 45,000 kg, permissible axle load (axle 1): 15,000 kg, permissible axle load (axle 2): 30,000 kg, first registration: 07/2020, next inspection (TÜV): 08/2026, total length: 13,580 mm, total width: 2,550 mm, suspension: air, tire size: 245/70 R 17,5, wheelbase: 1,410 mm, ground clearance: 334 mm, color: red, trailer brake: trailer braked, Year of construction: 2020, Equipment: ABS, Möslein 3-Axle Lowbed Semi-Trailer - Plato Stock vehicle Technical gross weight: 45,000 kg High bed length: approx. 4,180 mm Low bed length: approx. 9,400 mm Coupling height: approx. 1,200 mm BPW axles Last axle with steering function Air suspension with lift and lower function 1 axle as lift axle ABS, EBS Warning plates with lighting Ramp mounting rail Rear with mechanical support 12 tires size 245/70R 17.5 Bodey R R T Ajpfx Ap Iodc Spare wheel with holder Front wall approx. 800 mm high 3 cross beams 4 pairs of container locks Chassis painted in Red RAL 3002

Condition: used, maximum load weight: 26,500 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/1994, loading space length: 13,030 mm, loading space width: 2,600 mm, total width: 2,600 mm, total height: 4,000 mm, Loading bed: 8,620 mm, rear slope: 450 mm, width: 2,600 mm, width: 3,111 mm with extensions, extendable and/or folding extensions, gooseneck: 3,960 mm, loading height bed: approx. 880 mm, hydraulically movable loading ramps (LxW) 2,900x830 mm, electric hydraulic pump, cable remote control, 2 x heavy-duty lashing rings per side, 5 x stake pockets per side, extendable warning signs, centralized lubrication system, support winches, three axles with hydraulic forced steering, drum brake system, air suspension, rotating beacon, reverse lights. Vehicle may be equipped with advertising stickers and/or lettering. SI85616 Bdodpew Sb Sqjfx Ap Isc Our offer generally does not include a new roadworthiness inspection (TÜV). If a new inspection is desired, we are happy to provide a quote from our partner workshops! Vehicle may be equipped with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We will gladly prepare a financing or leasing offer for this item. Please contact us!

Condition: used, maximum load weight: 85,000 kg, overall weight: 105,000 kg, axle configuration: > 3 axles, first registration: 06/1999, loading space length: 18,000 mm, loading space width: 3,500 mm, total width: 3,500 mm, Cargo Master CM 90, designed for internal operations, for example: industry, ports, steep ship ramps. Features include independent wheel suspension, hydraulic lift, extreme steering lock, high maneuverability, loading height lowered approx. 670 mm, loading height raised approx. 1150 mm, payload: approx. 85,000 kg. The vehicle may feature advertising decals and/or lettering. Bdedexvwb Ujpfx Ap Ijc SI86388 Our offer is generally made without new roadworthiness (TÜV) inspection. If a new TÜV inspection is required, we can provide a quote through our partner workshops! The vehicle may display advertising decals and/or lettering. Our general terms and conditions of delivery and payment apply. We will gladly prepare a financing or leasing offer for this unit. Please contact us!

Condition: used, first registration: 01/2012, * Curtain-side body * Low loader * Curtain * Body * Variable curtain-side body for low loader * Removable * 12.45 m x 2.40 m x 2.60 m + 50 cm (internal) * Immediately available Bedpfelmicmox Ap Ijdc * Subject to errors and prior sale Do you have any questions? Contact us for quick advice, also directly via WhatsApp: We offer: Net purchase for companies from the EU with VAT ID number, as well as customers from non-EU countries. Leasing and financing options. Completion of all customs formalities. Issuance of temporary and export license plates. Transport to port. All prices listed on classifieds are gross prices and already include the legal VAT of 19%.

Condition: used, first registration: 01/2012, * Tarp superstructure * !!!Not a low loader!!! * Coil trough * Tarp * Superstructure * Variable tarp superstructure for low loaders * Removable * Immediately available * Subject to errors and prior sale Do you have any questions? Contact us for quick advice, also directly via WhatsApp: We offer: Net purchase for companies from the EU with VAT ID number as well as customers from third countries. Leasing and financing options. Handling of all customs formalities. Issuance of short-term and export license plates. Bsdperqtqmjfx Ap Ijdc Transport to port. All prices listed on Kleinanzeigen are gross prices and already include the legal VAT of 19%.

Condition: used, maximum load weight: 34,030 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2025, next inspection (TÜV): 07/2026, total width: 2,480 mm, Equipment: ABS, You can find our complete stock of immediately and short-term available vehicles on our website. Excerpt from the equipment. Complete specification available upon request. Gooseneck: * Gooseneck with rear bevel approx. 750 mm x 10°, 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick loading surface, hydraulically liftable and lowerable loading area behind the gooseneck, approx. 2,800 mm long, with rear bevel approx. 1,000 mm x 8° * 6 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of fold-in lashing rings to the inside on the front central beam (LC 10,000 daN) Bodpfxey Nu Hko Ap Ijdc * Grating surface C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm) over the axles, checker plate covering Two-part steel ramps: * One pair galvanized two-part steel ramps, reinforced design, approx. 3,185 + 1,420 x 1,250 mm, with grating surface C40/5 (point load approx. 8 t on an area of appr. 20 x 20 cm) * Ramps with hydraulically extendable and retractable sections and hydraulic lifting device, maximum load per pair: 40,000 kg * In accordance with regulation 1230/2012/EU, ramps with a length less than 300 mm in driving position do not have to be included in the total vehicle length of 16,500 mm Landing gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) * Tires 235/75 R 17.5 3PMSF * TPMS tire pressure monitoring system according to ECE R 141 Axles: * BPW axles and suspension * 2 rigid axles, 1 self-steering trailing axle * Technical axle load: 12,000 kg each * Electromagnetic reverse lock, activated via reverse gear and manually * Air suspension with lift and lower valve Braking system: * WABCO braking system according to EU regulations with EBS-E (2S2M) Colors: * Trailer in RAL 3002 carmine red * Rims silver * Tarp in RAL 9006 silver Including accessories: * 1 spare wheel carrier under the loading area, right-hand side in direction of travel * 2-inch kingpin * One galvanized steel front wall * Yellow-red air couplings on the galvanized connection bar at the front * 4 wheel chocks with holders on the front wall * 3 levels of wooden slats * Galvanized folding supports under the rear slope of the loading platform * Adjustable curtain body height approx. 3,960 mm * Galvanized front wall with tension mechanism for sliding curtains * Roof from EDSCHA, adjustable in height by approx. 400 mm, can be slid forward on aluminum roof beam profiles (bolted to front and rear wall) * 3 pairs of sliding stakes in the loading area * Body hydraulically extendable by approx. 750 mm left and right at the rear * Sliding tarp with approx. 700 mm length reserve, tension straps at approx. 600 mm intervals in height * Top edge of body approx. 3,960 mm (laden) * Driving with open sliding roof is not permitted and will damage the tarp * A painted sand layer as anti-slip coating on the gooseneck and loading area checker plates * Cover plates to bridge the gap between ramps and loading area * Electro-hydraulic unit at the rear under the loading area * Mountings for warning boards, including socket, on the left and right of the gooseneck and ramps * Ramp control valves installed on the right side of the trailer * Grating in the gooseneck slope C30/3 (point load approx. 2 t on an area of 20 x 20 cm) * Grating in the slope of the load f

Condition: used, maximum load weight: 38,050 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 06/2018, loading space length: 13,190 mm, loading space width: 3,150 mm, loading space height: 890 mm, total width: 2,550 mm, total height: 3,550 mm, Year of construction: 2018, Equipment: ABS, Kaessbohrer LB3E low-bed semi-trailer with hydraulic ramps First registration BPW Eco Plus axles Lifting axle Drum brakes with ABS and EBS Air suspension Tyres: 245/70 R17.5 35/40% Gross weight: 48,000 kg, unladen weight: 9,950 kg, payload: 38,050 kg Gooseneck length: 3.95 m Low-bed length: 9.24 m Width: 2.55 m + 2x30 cm Loading platform height: 89 cm Hydraulic ramps with lateral shift Rear supports Bdjdpfsy Ngapjx Ap Isc Lashing rings Stanchion pockets Subject to errors/mistakes and prior sale

Condition: new, maximum load weight: 27,940 kg, overall weight: 36,000 kg, axle configuration: 3 axles, Year of construction: 2026, * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function as well as RtR valve * Traction assistance for shunting, activated on the first axle via EBS – without truck-side installation – with lifted lift axle + 30 mm driving height * Smart-Board infotool mounted on the trailer, equipped with pressure sensors for total axle load display * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle activated from the cab for maneuvering purposes via EBS (without truck-side installation) * 2" king pin * 1 liftable axle * Side underrun protection * Front aluminum drop-down supports and rear swivel supports on the chassis * Alcoa LVL One aluminum rims * 15-pin power connector * LED lighting 12 / 24 V * Rear removable LED rotating beacon * 2 additional LED reversing lights * 2 LED work lights mounted laterally on the trailer (without truck-side installation) * 7-pin socket at the rear for oversize load lighting * Side marker lights with indicator control * Tire pressure monitoring system with display capability in the truck via EBS signal (without truck-side installation) * Mechanically adjustable warning sign packages front and rear * Straight steel mudguards * Semi-trailer platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with top hinged lid and side doors in the chamfered corners * 400 mm high aluminum side walls (RAL 9010 pure white) on the sides of the semi-trailer platform, foldable and removable * Rear panel inserted, height 150 mm * Rear slope on the semi-trailer platform to the low bed, approx. 700 mm long with anti-slip tread plate surface and a perforated strip at the end for hanging on aluminum loading ramps * Semi-trailer platform and low loader platform with 50 mm clamped timber floorboards * Checker plate above the axles * Prepared for 3 slots underneath the semi-trailer platform for storage of optional aluminum loading ramps * Swivel arm as support for connection lines from the truck to the trailer * Load securing package (LaSi): perforated outer frame on the semi-trailer platform with 45° edge and hole pattern for lashing equipment (2 t lashing capacity per point at minimum spacing of 480 mm), each side with 2 x 6.3 t recessed lashing rings in the floor, each side with 1 x 16.5 t lashing ring in the incline from the low loader platform to the semi-trailer platform, 2 pairs of 16.5 t lashing rings in the low loader platform (1 x on the longitudinal beams after the step, 1 x above the center axle beside the longitudinal beam), each side with 3 x 13.4 t lashing rings on the outer frame (1 x at start of the semi-trailer step, 1 x at start of loading ramp slope, 1 x at end of loading ramp slope), each side with 3 x 10 t lashing rings (2 x between front wheel recess and first axle, 1 x between second and third axle), each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel recesses (2 x at front, 1 x at rear wheel recess) * Extended excavator arm trough running from the end of the last fixed axle over the steering axle up to the rear crossmember, with internal reinforcement profile, approx. W = 770 mm x rear D = 270/front D = 170 mm, each side with 2 x 6.4 t lashing rings in the excavator arm trough * Each side with 2 wheel recesses, 390 mm deep and 640 mm wide, f Bdjdpowh Hdxefx Ap Ijc

Condition: used, empty load weight: 22,900 kg, maximum load weight: 41,100 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 10/2009, suspension: air, tire size: 235/75 17,5, tire condition: 70 %, color: green, Year of construction: 2009, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 40194 Goldhofer, STZ-VL4-42/80A * Year of manufacture: 2009 * ABS, Anti-lock Braking System * Air suspension * Steerable axle * Air connection, coupling head (red + yellow) * Spare tire holder with spare tire * Connection plug, 2x7-pole * Lifting and lowering device Bdedpeyict Usfx Ap Isc * Extendable * Telescopic – Telescopic drawbar trailer * Heavy-duty lashing rings * Suspension: Air * Gross vehicle weight: 64,000 kg * Tare weight: 22,900 kg * Payload: 41,100 kg * Permissible gross vehicle weight: 64,000 kg * Axle manufacturer: BPW * Tire condition, 1st axle: 70% – 70% - Tire size: 235/75 R17.5 * Tire condition, 2nd axle: 70% – 70% - Tire size: 235/75 R17.5 * Tire condition, 3rd axle: 70% – 70% - Tire size: 235/75 R17.5 * Tire condition, 4th axle: 70% – 70% - Tire size: 235/75 R17.5 * Tire sizes: 235/75 R17.5 * Telescopic extension, approx. 4000 mm * Platform height above axles: approx. 1000 mm * Platform height above ground: approx. 360 mm * Extendable to 3200 mm * Detachable gooseneck Disclaimer: Subject to changes, prior sale, and errors. More pictures and videos can be found on our website. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Quick and straightforward financing * Application for all (export) documents * Ordering of export license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transportation of commercial vehicles Please contact our trained specialists; we will be happy to advise you.

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2026, * TS 3 Profile 30.0: ----Brake System: * Wabco EBS-E (electronic braking system) * Emergency release for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard operating box mounted on the trailer as an info tool, with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12/24V * LED rotating beacon (removable), mounted rear left ----General Attachments: * Side underrun protection * Support legs in front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted underneath the chassis, right side ----Low Loader Platform: * Fifth-wheel platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm high drop-side aluminum boards (RAL 9010 pure white), foldable and removable, along the platform sides * Rear wall insert – 150 mm high * Rear slope on the platform to the low bed, approx. 700 mm long * Fifth-wheel platform with 50 mm timber floorboards, and low bed platform with 60 mm timber floorboards * Checker plate over the axles ----Widenings: * 8 x mechanical fold-out width extensions to achieve a total width of 3 m (excluding the rear slope); extension boards included with storage on the platform * Mechanically adjustable warning panel sets at front and rear ----Load Securing (Lashing Package): * On the platform, 2 x 6.3 t lashing rings each side, plus 3 x 5 t lashing bars in the outer frame on each side * On the low-bed platform, each side: 2 x 13.4 t lashing rings; plus 4 x 10 t folding and retractable lashing rings recessed in the outer frame * Each side: 2 x 6.4 t lashing eyes, plus one lashing ring at the rear in the excavator arm recess * 2 x container locks immediately after the gooseneck in the low-bed platform ----Excavator Arm Recess: * Continuous excavator arm recess from end of last fixed axle over the steering axle up to the rear cross member, with internal reinforcement, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Single-piece, hot-dip galvanized mechanical-hydraulic loading ramps approx. 3,000 x 720 mm (mechanically adjustable laterally) * 4-way control block for later customer-side retrofitting of hydraulic ramp shifting * The outer plank of the ramp made from 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump capacity in truck over 40 up to 120 l/min) ----Loading Dimensions: * Fifth-wheel platform load area: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Unladen load height approx. 910 mm (incl. 860 mm approach slope) ----Fifth-Wheel Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paintwork: Bdjdpfol Tnvgsx Ap Ioc * Chassis, ramps, rear folding supports, widening consoles hot-dip galvanized * Axles, support legs, air tanks painted in black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer warranty * Subject to error and prior sale * Sample images may show equipment not included with the offered vehicle ----Delivery Time: * Available from calendar week 38/2026

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle is steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower function, as well as RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an infotool, with pressure sensors for total axle load indication * 15-pin power connector * LED lighting system 12 / 24V * Removable LED beacon, rear left ----General Attachments: * Side underrun protection * Support winds at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted on the right side under the chassis ----Low-loader Platform: * Saddle platform with 45° chamfered front corners and front toolbox made from galvanized sheet steel (W = 2,480 x H = 500 x L = 665 mm) with folding lid * 400 mm high aluminum drop sides (RAL 9010 pure white), foldable and removable on the sides of the saddle platform * Rear wall insert, 150 mm high * Rear slope on the saddle platform towards the low bed, approx. 700 mm long * Saddle platform with 50 mm wooden planks and low bed platform with 60 mm wooden planks Bsdpfjy Ngzyox Ap Iodc * Tread plate over the axles ----Widenings: * 8 x mechanical folding widenings up to a total width of 3 meters, except at the rear slope (widening planks included, with storage on the saddle platform) * Mechanically adjustable warning sign packages at front and rear ----Load Securing (Lashing Package): * On the saddle platform: 2 x 6.3 t lashing points each, plus 3 x 5 t lashing bars on each side in the outer frame * On the low bed platform, each side with 2 x 13.4 t lashing rings plus 4 x 10 t lashing rings, foldable and lowerable, integrated in the outer frame * Each side with 2 x 6.4 t lashing eyes plus 1 lashing ring at the rear in the excavator arm trough * 2 x container locks directly after the neck on the low bed platform ----Excavator Arm Trough: * Continuous trough for excavator arm from end of last rigid axle over the steering axle up to the rear cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanically one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer-side retrofit of hydraulic ramp shifting * The outer board on the ramp consists of 50 mm hardwood * Ladder cleats on the outer frame of the ramp as well as on the approach slope * Rubber matting on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in trailer (for hydraulic pump performance in truck above 40 l up to 120 l/min) ----Loading Dimensions: * Saddle platform loading area: approx. 3,935 x 2,480 mm * Low bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach slope) ----Coupling Height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Painting: * Chassis, ramps, rear folding supports, and widening consoles hot-dip galvanized * Axles, support winds, air tanks painted black * Vehicle is fully hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may contain equipment not included with the offered vehicle ----Delivery Time:

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower system and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an info tool, with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12 / 24V * Removable LED beacon, left rear ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under the chassis, right side ----Low-loader deck: * Saddle platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high drop-side aluminum boards (RAL 9010 pure white), foldable and removable, on the sides of the saddle platform * Rear board – 150 mm high, slotted in * Rear slope on the saddle platform to the low-bed section, approx. 700 mm long * Saddle platform with 50 mm wooden planks and low bed with 60 mm wooden planks * Tread plate over the axles ----Widening: * 8 x mechanical folding extensions to 3 meters total width, not on the rear slope (widening planks available, stored on the saddle platform) * Mechanically adjustable warning panel sets front and rear ----Load securing (Lasi package): * On the saddle platform, 2 x 6.3 t lashing points each, as well as 3 x 5 t lashing bars each on the outside frame * On the low-bed platform, 2 x 13.4 t lashing rings on each side, as well as 4 x 10 t lashing rings, pivotable and lowerable, integrated into the outside frame * On each side, 2 x 6.4 t lashing eyes and one lashing point in the excavator arm trough at the rear * 2 x container locks directly after the gooseneck in the low bed platform ----Excavator arm trough: * Excavator arm trough starting from the end of the last fixed axle, over the steering axle up to the rear cross member, continuous with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable in width) * 4-way control block for later customer-side retrofit of hydraulic ramp shifting * The outer board of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope * Rubber mat on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in truck over 40 l up to 120 l/min) ----Load dimensions: * Loading area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen about 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, widening consoles hot-dip galvanized * Axles, landing legs, air tanks painted black * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Example images may show equipment not included with the offered vehicle * Sample images ----Delivery time: Bsdpsy Ngz Hofx Ap Iedc * tba

Condition: used, empty load weight: 16,200 kg, maximum load weight: 52,400 kg, overall weight: 68,600 kg, axle configuration: > 3 axles, first registration: 06/1979, loading space length: 7,800 mm, loading space width: 3,150 mm, loading space height: 1,380 mm, total height: 131,000 mm, suspension: steel, tire size: 445/65R22.5, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, Kässbohrer axles, leaf suspension, forced steering, lashing eyes, 2-piece drive-on ramps, front support, twin tires. Body: 750mm ramp width, fifth wheel height 1550mm, kingpin 3 ½", 4 x 13t axles, 4 axles with hydraulic forced steering, total length 13,100mm. ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors! Bdedowh Uipspfx Ap Ioc

Condition: used, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 01/2015, loading space length: 13,590 mm, loading space width: 2,500 mm, loading space height: 1,820 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Technical Overview: Chassis: 2 axles, steered, TRIDEC steering system (mechanical, without electronics) * Gross vehicle weight: 30 t (12 t fifth wheel load + 18 t axles) * Tyres: 4× Goodyear 385/65 R22.5 * External dimensions: 13,820 × 2,550 × 4,045 mm * Upper deck internal dimensions: 13.59 × 2.5 × 1.82 m * Lower deck internal dimensions: 9.94 × 2.5 × 1.82 m * Lower deck floor height from ground: 320 mm * Axle spacing: 1,400 mm --- Body & Materials: * Plywood side walls/front: 21/24 mm, white polyester-coated * 30 mm insulated polyester roof with rainwater management Bsdpfx Ajyb U Idep Iodc * Anti-slip aluminium floors (grey) * Stainless steel front and corner profiles * Hot-dip galvanised chassis to ZINQ standard --- Safety & Handling: * WABCO air brake system, drum brakes, ABS/EBS-E with ECAS * Indicator lights (ABS/EBS/ECAS) clearly visible * WABCO SmartBoard: Weight display, odometer, adjustable loading height --- Comfort & Operation: * 3 large side flaps (battery, lift/SmartBoard, technical equipment) * Multi-deck lift Dhollandia, 2,500 kg capacity, LED platform, foldable railings/ramps * Lift controls: externally on the right, integrated in the guard rail --- Electrics & Lighting: * Full LED interior and exterior lighting, LED work lights/platform * 2× 230 Ah batteries, charged via tractor unit * Master switch located behind the side flap, linked with lift controls --- Finish & Advertising: * Exterior colour: RAL 9005 * Reflectors: 3M * Optional: advertising space available --- Key Advantages: * Replaces up to 3 standard trailers with 2 double decks * Customisable: axles, dimensions, cooling options selectable * Suitable for long-haul and distribution transport

Condition: used, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 01/2015, loading space length: 13,590 mm, loading space width: 2,500 mm, loading space height: 1,820 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Technical Overview: Chassis: 2 axles, steered, TRIDEC steering system (mechanical, without electronics) * Gross vehicle weight: 30 t (12 t fifth wheel load + 18 t axles) * Tyres: 4× Goodyear 385/65 R22.5 * External dimensions: 13,820 × 2,550 × 4,045 mm * Upper deck internal dimensions: 13.59 × 2.5 × 1.82 m * Lower deck internal dimensions: 9.94 × 2.5 × 1.82 m * Lower deck floor height from ground: 320 mm * Axle spacing: 1,400 mm --- Body & Materials: * Plywood side walls/front: 21/24 mm, white polyester-coated * 30 mm insulated polyester roof with rainwater management * Anti-slip aluminium floors (grey) * Stainless steel front and corner profiles * Hot-dip galvanised chassis to ZINQ standard --- Safety & Handling: * WABCO air brake system, drum brakes, ABS/EBS-E with ECAS * Indicator lights (ABS/EBS/ECAS) clearly visible * WABCO SmartBoard: Weight display, odometer, adjustable loading height Bdedpfx Apsyb U Iks Iec --- Comfort & Operation: * 3 large side flaps (battery, lift/SmartBoard, technical equipment) * Multi-deck lift Dhollandia, 2,500 kg capacity, LED platform, foldable railings/ramps * Lift controls: externally on the right, integrated in the guard rail --- Electrics & Lighting: * Full LED interior and exterior lighting, LED work lights/platform * 2× 230 Ah batteries, charged via tractor unit * Master switch located behind the side flap, linked with lift controls --- Finish & Advertising: * Exterior colour: RAL 9005 * Reflectors: 3M * Optional: advertising space available --- Key Advantages: * Replaces up to 3 standard trailers with 2 double decks * Customisable: axles, dimensions, cooling options selectable * Suitable for long-haul and distribution transport

Condition: used, maximum load weight: 26,240 kg, overall weight: 36,000 kg, axle configuration: 2 axles, first registration: 10/2008, loading space length: 10,819 mm, Equipment: ABS, Manufacturer B-XL Model 4.5 m. 2 axle extension Year 2008 Condition Good Serial Number WKVDAS00200021091 Ref. nr. 7721 Reg. date: 27-10-2008 Drum brake: ? ABS: ? Rear axles: SAF Suspension: Air Tire Size: 245 / 70R17,5 Cover% left 40 - 40% Total weight: 36000 kg. Net weight: 9760 kg. Bedpfxsvl Dkrj Ap Iedc Steering rearaxle:?

Condition: used, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2007, Equipment: ABS, Vehicle identification number: WG0STZV3570028656 First registered: 05.04.2007 DE HU due Own weight: 14,950 - 18,600 kg Removable gooseneck King pin 3.5" Bjdpfx Apet Eya Eo Ijdc ----Low bed length: 8,000 mm - Loading height: approx. 250 - 350 mm TELESCOPIC by 5,600 mm EXTENDABLE WHEEL HOLDS Chassis frame: 4,100 mm Total length: 16,400 mm Excavator trough - Dipper stick trough Central lubrication system BPW Eco axles with drum brakes with radio control 3 x hydraulically forced-steered axles Axle loads 3 x 10,000 kg Removable gooseneck - fifth wheel load: 18,000 kg Tires: 235/75 R 17.5 Changes, prior sale and errors are expressly reserved. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description according to the purchase contract is decisive. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is desired, we would be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment conditions apply.