Used lowboy semi-trailers / low loaders for sale (448)

Condition: used, maximum load weight: 6,500 kg, overall weight: 8,900 kg, axle configuration: 2 axles, first registration: 04/1996, next inspection (TÜV): 04/2025, Equipment: ABS, Welcome to Johanning's Commercial Vehicles, your specialist for recent and exclusive used vehicles. IMMEDIATELY available! Delivery & financing possible. Location: 39606 Osterburg - Brand: Fliegl - Low-bed trailer - 2 axles - Tyres approx. 70% Iodeyamp Djpfx Afhstb - Three-way tipper - Length: 6.6 m - Width: 2.5 m Johanning's Commercial Vehicles, your partner for exclusive and recent used vehicles. Our services – your advantages: (after the sale) - Trade-in of your vehicle possible (any condition). - Immediate deregistration of your vehicle free of charge. - Registration service for €150 (incl. fees, number plates). - Short-term plates. - Viewing and test drive possible at any time by telephone appointment. - Delivery to your door possible by arrangement. Subject to errors and prior sale.

Condition: used, first registration: 01/2016, loading space length: 13,382 mm, loading space width: 2,410 mm, loading space height: 3,157 mm, * SAF axles * Hydraulic loading ramp Itsdpfjwz Dm Dsx Afhob * Hydraulic supports * Winch * Remote control * Edscha sliding roof system -----Internal vehicle number: 11079----Errors & interim sales reserved WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp WhatsApp German, English -- WhatsApp German, English, Arabic

Condition: used, maximum load weight: 52,100 kg, overall weight: 70,000 kg, axle configuration: > 3 axles, first registration: 01/2009, next inspection (TÜV): 03/2026, loading space length: 24,400 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 2,500 mm, Equipment: ABS, Goldhofer Lowboy Trailer with Gooseneck - 5 axles - 1st axle liftable - Last 4 axles hydraulically steered - Central lubrication system - BPW axles - Tyres: 235/75 R17.5 - Drum brakes - Permissible gross weight: 70,000 kg - Unladen weight: 17,900 kg - Safety inspection due: 09/2025 - TÜV due: 03/2026 Itodpfx Ajwta Dpofhob - Loading height: 0.85 m - Loading width: 2.55 m - Loading floor length: 12.0 m - Gooseneck length: 4.0 m - Extendable to a total trailer length of 24.4 m Errors and prior sale excepted. Internal vehicle number: 11037 WhatsApp support available! For questions about the vehicle or for further information, feel free to contact us easily via WhatsApp.

Condition: used, maximum load weight: 52,100 kg, overall weight: 70,000 kg, axle configuration: > 3 axles, first registration: 08/2008, next inspection (TÜV): 12/2025, loading space length: 15,800 mm, total width: 2,550 mm, Equipment: ABS, Goldhofer Neck Low Loader - 5 axles - 1st axle liftable - Last 4 axles forced steering - Central lubrication system - BPW axles - Tyres: 235/75 R17.5 - Drum brakes - Perm. total weight: 70,000 kg - Empty weight: 17,900 kg - Safety inspection due: / TÜV due: 12/2025 - Loading height: 0.85 m - Loading width: 2.55 m - Low bed length: 12.0 m - Gooseneck length: 4.0 m Itjdpfsw S S Uvox Afhob - Extendable to a total trailer length of 24.4 m Errors and prior sale excepted. Internal vehicle number: 11177 WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp WhatsApp WhatsApp

Condition: used, overall weight: 40,500 kg, axle configuration: 2 axles, first registration: 08/2007, * Remote control * Forced steering * Extendable by 4,300 mm * Removable gooseneck * Central lubrication * Unladen weight: 12,450 kg -----Internal vehicle number: 11307----Errors & prior sale excepted Itodpfx Afoxchr Rehob WhatsApp support available! If you have any questions about the vehicle or require further information, feel free to contact us conveniently via WhatsApp Whatsapp: German, English -- Whatsapp: German, English, Arabic

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydraulic loading ramps, width adjustable * Air suspension * Extendable * Unladen weight: 11,020 kg -----Internal vehicle number: 11010----Subject to errors and prior sale. Itjdpfx Aowta Alofhob WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. WhatsApp: German, English -- WhatsApp: German, English, Arabic

Condition: used, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 11/2012, * Gigant axles * Air suspension * Follower-steered axle * Extendable * Unladen weight: 10,920 kg -----Internal vehicle number: 9799----Errors and interim sale excepted. Iodpfx Aswta Diofhetb WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Whatsapp German, English — Whatsapp German, English, Arabic

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 12/2007, * Extendable * Widenable * Steering axle * Stake pockets * SAF axles * Container lock * Unladen weight: 10,800 kg ----- Internal vehicle number: 7282 ---- Subject to errors & prior sale. Itjdpfougrbvjx Afhjb WhatsApp support available! If you have any questions about the vehicle or require further information, feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp

Condition: used, overall weight: 28,500 kg, axle configuration: 1 axle, first registration: 10/2011, next inspection (TÜV): 11/2025, loading space length: 8,190 mm, loading space width: 2,530 mm, * Remote steering * Hydraulic steering * Detachable gooseneck * BPW axles * Unladen weight: 9,280 kg * Roadworthiness inspection (HU): 11.2025 * Safety inspection (SP): 05.2026 -----Internal vehicle number: 11269----Subject to errors & prior sale WhatsApp support available! Itjdpfxow Sgdxo Afhjb If you have any questions about the vehicle or need further information, feel free to contact us easily via WhatsApp WhatsApp WhatsApp

Condition: new, empty load weight: 11,000 kg, maximum load weight: 38,500 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Gooseneck: - Gooseneck with rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - 30 mm thick hardwood flooring Loading Area: - Telescopic loading area with rear bevel approx. 1,000 mm x 8° - 1 pair of permanently installed wheel recesses in front of the axles, approx. 2,850 x 970 x 400 mm - Wheel recesses fitted with 15 x 15 mm square anti-slip bars and widened at the lower section - Between the 1st and 2nd axle, one pair of permanently installed wheel recesses with cover, approx. 1,610 x 970 x 400 mm - Recess in the rear slope projecting into the loading area for excavator dipper arm storage, approx. 2,900 x 750 x 210/290 mm - 1 pair of horizontal lashing rings at the front of the loading area (LC 10,000 daN) Isdpfxsup U Hzs Afhstb - 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) - 2 pairs of fold-out lashing rings to the outside (LC 10,000 daN) - 2 pairs of lashing rings in the excavator arm recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for securing straps (LC 2,000 daN) - Including 3-piece removable galvanized covers over the wheel recesses – max. point load 3.5 t per section Two-part Steel Ramps: - One pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with 48 mm thick hardwood surfacing - Ramps with hydraulically foldable ramp sections, hydraulic lifting gear, and hydraulically transverse-adjustable Axles and Tires: - BPW axles and suspension, 2 rigid axles, 1 self-steering trailing axle - Technical axle load: 12,000 kg - Electromagnetic reverse lock, activated via reverse gear or manually - Air suspension with raise/lower valve - Axle tool kit - Tires: 235/75 R 17.5 - TPMS tire pressure monitoring system according to ECE R 141 Accessories Included: - At the gooseneck and at the rear, left and right, each with a holder for warning signs, including socket - One spare wheel - 2" king pin - One galvanized steel front wall approx. 400 mm high - Yellow-red air couplings on the galvanized front connection panel - 4 wheel chocks - Galvanized extensions, extendable by approx. 230 mm each side - Galvanized folding supports under the sloped rear of the loading area - Holder for rotating beacon at the rear of the trailer - Cover plates to bridge the gap between the ramps and loading area - White reflective tape in accordance with EU regulations on the sides and on the extension, red at the rear - Rear-mounted electro-hydraulic power unit underneath the loading area - Ramp control valves mounted on the right-hand side of the trailer - European reflective signs (red-yellow) at the rear of the trailer - Four extendable warning signs, about 423 x 423 mm, each with a position light (extendable about 400 mm) - Mounting for rotating beacon on the warning signs - On the gooseneck, plug-in aluminium side walls and rear wall ca. 2,440 x 400 mm - The rear, galvanized plug-in posts are removable (body length approx. 2,560 mm) - 2 pairs of WADER container pockets in the loading area for one 20ft or 30ft container - 3 pairs of stake pockets for 100 x 50 mm plug-in stakes in the outer frame of the loading area - One removable, galvanized intermediate table with 1 pair of WADER container pockets - Square anti-slip bars 20 x 20 mm every 200 mm on the outer frame of the rear slope - Painted sand grip layer as anti-slip protection on the checker plates on the gooseneck and loading area - 80 km/h speed stickers at the rear and on both sides - Ax

Condition: used, maximum load weight: 39,780 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, first registration: 01/2023, next inspection (TÜV): 01/2026, Year of construction: 2022, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Iedpfjx Uvlrex Afhstb Extract from the equipment. Complete equipment details available on request. Gooseneck: - Gooseneck with front chamfered corners approx. 45° and rear chamfer approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading area: - Loading area with extendable design - 5 pairs of externally folding lashing rings (LC 5,000 daN) - 3 pairs of externally folding lashing rings (LC 10,000 daN) - 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) - Cutouts in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN) - Hardwood flooring approx. 48 mm thick, checker plate over axles Landing gear: - JOST mechanical landing legs with two-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 205/65 R 17.5, twin-mounted Axles: - BPW axles, two rigid axles, two steering trailing axles - Air suspension, with drum brakes - With raise/lower function - Trailing steering axles with electromagnetically operated reverse lock, activated via reverse gear or manually Braking system: - Braking system compliant with EU regulations with EBS-E (4S3M), without connecting lines to the tractor unit Steel structure: - Steel construction made of high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: - First-class, durable corrosion protection of the standard shot-blasted welded frame, ensured by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) top coat, solid color in RAL 3002 Carmine Red - Rear section metallized and painted in RAL 9010 (Pure White) - Rims in silver Electrical system: - Electrical system in compliance with EU regulations Lighting: - 24 Volt ASPÖCK NORDIK (ASS3) - ASPÖCK UNIBOX at the front connector panel with 24N, 24S & 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: - 2-inch kingpin - A galvanized steel front wall approx. 400 mm high - A spare wheel holder in front of the front wall - Yellow-red air couplings on the galvanized connector panel at the front - 4 wheel chocks with holder at the front wall - Accommodation at the rear of the gooseneck for ALU loading ramps - Galvanized folding supports under the loading area's chamfer - Bracket for a rotating beacon at the rear of the trailer - Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer - One bracket each for warning signs with socket on both left and right of the gooseneck and rear plate - One mudflap at the rear of the trailer - Manual and documentation on USB stick - European reflective panels (red-yellow) at the rear of the trailer - 80 km/h speed labels at the rear and on both sides - Acoustic reverse warning signal - Load gauge for determining axle loads, including load diagram

Condition: used, maximum load weight: 36,100 kg, overall weight: 49,000 kg, axle configuration: 2 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, Equipment: ABS, Excerpt from the equipment. Full equipment details available upon request. Gooseneck Gooseneck in SNT design for optimization of loading platform length Length approx. 3,750 mm Hydraulically liftable/lowerable and detachable Technical fifth wheel load: 25,000 kg For tractor units: 4 x 2, 6 x 2, and 6 x 4 Low bed Low bed designed as a telescopic vessel bridge in low profile design with front extension and mechanical locking Dimensions (L x W): approx. 6,850 mm x 2,540 mm Supply lines are protected inside the extendable beams and automatically adjust to the respective low-bed length Axles and Suspension PENDLE-AXLE – all axles hydro-mechanically forced-steered, hose rupture valve on axle compensation, cylinders with automatic reset function Hydraulic cylinders with shut-off valves and retaining pins for securing in raised position Technical axle load: 12,000 kg per axle Hydraulic axle compensation Tyres 245/70 R 17.5 Rear chassis Rear chassis with closed outer frame with checker plate cover and continuous prismatic excavator trough approx. 1,250/700 x 505 mm, open at the rear Brake system WABCO EBS-E brake system certified according to EU regulations, without connection cable to the tractor unit Paintwork Trailer color: RAL 3002 Carmine Red Included accessories Removable steel front wall, approx. 400 mm high 3 kW electro-hydraulic power unit for operating the hydraulic functions, except hydraulic winches, without supply connections installation on the tractor unit Outer beams of the gooseneck with mounting holes for bolted lashing rings; first hole approx. 200 mm from front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN) 1 lashing ring each left and right on the rear bevel of the gooseneck (LC 6,000 daN) 2 inch king pin One locking point approx. every 500 mm on the extension 1 pair of steel ramps with climbing bars and mounting bolts for bridging the low bed support hooks 1 lashing ring each left and right on the front cross member (LC 10,000 daN) Itedpsx Uvlljfx Afhsb Lashing rings with retaining springs every approx. 1,200 – 1,300 mm on the outer side of the inner beams of the loading platform Lashing rings with retaining springs every approx. 1,200 – 1,300 mm on the outer side of the outer beams of the loading platform (LC 10,000 daN) Cutouts for the lashing rings on the upper flange of the outer beams 1 hanging lashing ring each left and right on the outer rear cross member (LC 10,000 daN) Preparation on the outer beams of the loading platform for removable floor boards Front hanging bar on the rear chassis for loose approach ramps to the low bed Chassis with beveled corners at the rear Hanging bar for loose aluminum approach ramps on the rear end traverse of the vehicle Remote steering operated from front and rear by cable remote control via push buttons, with single-track axle control, without installation in the tractor unit Mechanical pin-lug coupling from the low bed to the chassis for exchanging the loading platform or installing extension beams, with electro-pneumatic-hydraulic couplings Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) 2 axle load gauges mounted on the left side Including special equipment On the gooseneck: 1 pair of removable side aluminum drop sides, approx. 400 mm high, anodized On the gooseneck: 1 removable rear aluminum drop side, approx. 400 mm high, anodized Central lubrication system with 2 pumps, Brand: BEKAMAX 2 pairs of bolted lashing...

Condition: new, maximum load weight: 43,929 kg, overall weight: 58,000 kg, axle configuration: > 3 axles, loading space length: 16,690 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,570 mm, Equipment: ABS, Kässbohrer K.SLA R 4 / 2N ? 18/40 Low Loader, Telescopic with Wheel Recesses (NEW) ----Equipment & Highlights Technology & Construction: - Extendable low loader with wheel recesses - Overall length: 13,190 mm, platform: 9,240 mm + 3,500 mm extension - Platform height: only 875 mm for low loading height - Total width: 2,550 mm + 600 mm extension - Unladen weight: approx. 14,071 kg - Gross vehicle weight: 58,000 kg (80 km/h) / 63,800 kg (60 km/h) Chassis & Axles: - 4 BPW axles, front 2 fixed, rear 2 self-steering - Lift axle (automatic + manual) - Air suspension with load gauge - WABCO EBS 4S/3M, ABS & RSS - WABCO Smartboard (axle load, suspension, diagnostics) - 16x tyres 245/70 R17.5 (M+S + 3PMSF) - Tyre pressure monitoring according to R141 Itjdpex Efznjfx Afhsb Ramps & Loading Area: - Foldable 40-ton ramps - Ramp length: 2,750 mm, width: 850 mm - Hydraulic sliding system - 45 mm hardwood floor + steel chequer plate over wheel arches - Wheel recesses + covering bridges included - Digger arm recess at rear Load Securing: - Extensive lashing points: - 2×2 lashing rings 5,000 daN & 1×2 lashing rings 10,000 daN on gooseneck - 3×2 lashing rings 5,000 daN & 4×2 lashing rings 10,000 daN on platform - 8,000–10,000 daN on outer frame/wheel recess area - 5×2 stake pockets, removable stanchions 50×100 mm - Container locks for 1×20 ft or 1×30 ft containers Equipment & Comfort: - 1× tool box (700×400×360 mm) - Stanchion box - Beacon light - LED side lighting, LED work lights - Wheel chocks - Width marker boards with LED - Standard 2" kingpin - Metallized chassis (Zn/Al 85/15) – high corrosion protection - Colour: RAL 9005 Black ----Special features: - New & immediately available - High payload, extremely flexible application - Perfect for machinery transport, construction equipment, vehicles, etc. - Very robust construction, high-quality BPW components For further information, we are at your disposal.

Condition: used, maximum load weight: 28,600 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 03/2012, next inspection (TÜV): 01/2028, Year of construction: 2012, Internal Vehicle No.: G300458 German vehicle Available immediately at our yard in Kaufungen - Kassel, Germany More INFO: Luis Lucena Low Loader FAYMONVILLE STBZ-2V Year of manufacture: 2012 Unladen weight: 9,400 kg Max. weight: 38,000 kg Hydraulic forced steering Special permit §70 Loading platform: 6,600 mm Price: €39,900 plus VAT Financing example: * Internal number: G300458 * Purchase price: €39,900.00 * Down payment: 10% * Term: 60 months * Monthly instalment: €624.93 Ijdpfxox U Nlfs Afhetb * Residual value: €7,980.00 If you are interested in this offer or wish to tailor it to your needs, please contact us (Mr. Enchev). We look forward to your call. Errors excepted. We are happy to take your used vehicle in part exchange. Financing available directly through us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, maximum load weight: 36,940 kg, overall weight: 45,500 kg, axle configuration: 3 axles, first registration: 02/2022, next inspection (TÜV): 02/2026, Year of construction: 2022, Equipment: ABS, Brake System: * Knorr EBS-E (electronic braking system with RSS roll stability control) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axle: * Load-dependent lift axle on the 1st axle including starting aid (forced lowering of the lift axle via TIM possible) * Last axle is a friction-steered trailing axle (reverse steering lock via reverse gear) * BPW Eco Max axles ----Suspension: * Air suspension with lifting and lowering system ----Electrics / Lighting: * Knorr Trailer Information Module * Reversing camera * Acoustic reversing alarm * 15-pin and 2 x 7-pin sockets * LED lighting * LED beacon ----General Fittings: * BPW landing gear at front * One plastic toolbox each in front of the landing gear * Mechanically spring-assisted drop legs at the rear for supporting during loading * Mechanically adjustable warning sign sets at the landing gear area and at the ramps on the rear ----Gooseneck: * Steel floor * Front wall, 400 mm high * Enclosed toolbox with folding lid in front of front wall, approx. 2,400 x 500 x 550 mm * Front corners 90°, plus 2 plug-in aluminium sideboards per side, 400 mm high (approx. 3,150 mm long) * 3 pairs of 5 t retractable UVV lashing rings per side on gooseneck * 2 pairs of stake pockets * Closed outer frame with cutouts for 1.5 t lashing straps * 1 pair of central stake pocket rails ----Lowbed Deck: Iodpfx Asx Uvn Hsfhstb * Steel floor * Closed outer frame with cutouts for 2 t lashing straps * 6 pairs of 10 t lashing points in outer frame * 1 pair of 10 t lashing points at centre of load area behind gooseneck and at the rear * 2 pairs of 100 x 50 mm stake pockets per side in outer frame ----King Pin: * 2" king pin with second screw-in position ----Excavator Arm Rest: * Approx. 3,450 x 760 mm incl. 2 t long holes for load securing * Excavator arm trough covered with 2 folding lids ----Wheel Wells: * 1 pair of wheel wells - bottom 1,840 mm, top 2,840 mm long - in front of 1st axle, 390 mm deep, with climbing strips in the slopes * 1 pair of wheel wells - bottom 560 mm, top 1,640 mm long - between 1st and 2nd axle, 390 mm deep, with climbing strips in the slopes * Different wheel well depths by using wheel well covers (depth approx. 390 mm and 260 mm) * ALLTEC aluminium wheel well covers "Premium" 600 mm wide ----Widening: * Prepared for extension beams for 3,000 mm width with 8 t axle load * 2 widening beams per side mounted in outer frame for total width of 3,000 mm ----Ramps: * Lateral climbing strips in rear slope * Sled-type design for easy mounting and removal of ramps * ALLTEC VFR 120 R single-piece aluminium loading ramps approx. 2,500 x 600 mm (pair load capacity 24 t) * Mechanically adjustable sideways ----Load Dimensions: Gooseneck: * Approx. 3,700 x 2,550 mm, incl. 550 mm approach slope to lowbed deck Lowbed length: * Approx. 8,700 x 2,550 mm, incl. 550 mm approach slope, 8° at rear ----Loading Height: * Approx. 855 mm ----Paintwork: * Frame finished with corrosion-resistant zinc dust primer and effective cavity sealing ----Coupling Height: * Approx. 1,220 mm ----Notes: * Subject to errors and prior sale ----Delivery Time: * Available immediately ex Egestorf (A7 motorway)

Condition: used, maximum load weight: 18,200 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 10/1991, loading space length: 5,940 mm, loading space width: 2,500 mm, total width: 2,550 mm, total height: 3,250 mm, * Hydraulic loading ramps * SAF axles with twin tyres * Drum brakes on all axles * Spare wheel * Wheel chocks ----* Tyre size: 9.5R17.5 * Technical gross weight: 30,000 kg * Axle load 1st/2nd/3rd axle: 10,000/9,100/9,100 kg * Unladen weight: 5,800 kg * Total length: 10,400 mm * Safety inspection due: expired ----Vehicle number: 11709----Subject to errors and prior sale----Advertising and various lettering have been digitally removed.-----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your requests and suggestions, and we will take care of them. For an additional fee, we can also offer you the following services:----* Trade-in of your old vehicle * TÜV/Safety inspection * Complete export processing Iedpfx Aex Tylyjfhjtb * Financing mediation * Application for export license plates * Vehicle transfer * Vehicle registration * Vehicle recovery and transportation ----Your VTS Team

Condition: used, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 12/2022, loading space length: 12,400 mm, loading space width: 2,550 mm, total width: 2,550 mm, Year of construction: 2022, Equipment: ABS, SAF axles, hydraulic ramps, open box at front, mud flaps, air suspension, lifting/lowering function, spare wheel, additional headlights, warning signs, and much more. Tyres: Axle Position Size Manufacturer Type Tread Depth 1 Left Outer 345/70R17.5 Continental 10.0 mm 1 Left Inner 345/70R17.5 Continental 10.0 mm 1 Right Inner 345/70R17.5 Continental 10.0 mm 1 Right Outer 345/70R17.5 Continental 10.0 mm 2 Left Outer 345/70R17.5 Continental 10.0 mm 2 Left Inner 345/70R17.5 Continental 10.0 mm 2 Right Inner 345/70R17.5 Continental 10.0 mm 2 Right Outer 345/70R17.5 Continental 10.0 mm 3 Left Outer 345/70R17.5 Continental 11.0 mm 3 Left Inner 345/70R17.5 Continental 11.0 mm 3 Right Inner 345/70R17.5 Continental 11.0 mm 3 Right Outer 345/70R17.5 Continental 11.0 mm 4 Left Outer 345/70R17.5 Continental 10.0 mm 4 Left Inner 345/70R17.5 Continental 10.0 mm 4 Right Inner 345/70R17.5 Continental 10.0 mm 4 Right Outer 345/70R17.5 Continental 10.0 mm Customs number plates and insurance available at extra cost on request! For export business, we can handle export declaration and registration for you for a fee. For exports to non-EU countries, a deposit of 19% of the purchase price will be withheld. This will be refunded to the buyer after successful customs clearance or delivery. For further information, please contact Mr. Lübberding via mobile/WhatsApp. Please always schedule an appointment for inspection or test drives! Just drop by and have a look—we look forward to your visit. --- All details given online are non-binding descriptions. They do not represent guaranteed characteristics. The seller is not liable for typographical or transmission errors, changes, entry errors or mistakes. Subject to prior sale. Isdpfxeu Uzv Es Afhjtb

Condition: used, maximum load weight: 51,900 kg, overall weight: 66,000 kg, axle configuration: > 3 axles, first registration: 08/2013, total width: 2,540 mm, Year of construction: 2013, Equipment: ABS, FELLECHNER, own ELECTRO-HYDRAULICS (no hydraulics required on the tractor unit), Length: 13 meters, extendable by 4 meters up to 17 meters, 4 wheel recesses, widening up to 3 meters, 2 king pin positions possible (for 2 or 3 axle tractor unit), excavator arm recess, GERMAN vehicle from first owner, inquiries by phone & WhatsApp: , viewing ONLY by appointment, subject to errors, input mistakes and prior sale, (19% VAT applicable - net price EUR 29,700) Isdovyvy Iopfx Afhjtb

Condition: reconditioned (used), functionality: fully functional, empty load weight: 20,000 kg, maximum load weight: 79,000 kg, axle configuration: 2 axles, wheelbase: 1,360 mm, Year of construction: 2000, MAXIMUM PAYLOAD: 79,000 kg GROSS WEIGHT: 20,000 kg AXLE TYPE: 2+2 Iedeyab Uzopfx Afhjtb AXLE DISTANCE: 1360 mm BRAKES: AIR BODY: EXTENDABLE

Condition: reconditioned (used), functionality: fully functional, empty load weight: 20,000 kg, maximum load weight: 120,000 kg, axle configuration: 3 axles, tire condition: 70 %, color: red, Year of construction: 2006, 3 liftable and steerable axles. Hydraulic suspension Height-adjustable gooseneck Hartz auxiliary petrol engine Itjdpfx Afjyaaz Hsheb Independent wireless steering control Hydraulic rear ramps for machine loads up to 70 tons

Condition: used, maximum load weight: 35,220 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 10/2001, next inspection (TÜV): 08/2025, total width: 2,550 mm, Equipment: ABS, You can find our entire vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the features. Complete equipment list available on request. - 3 x 10 t BPW axles - 3 hydraulically-mechanically forced-steered axles - Remote cable control for axle steering - 2” kingpin Iodpox Tmvfefx Afhjtb - Air suspension with lift and lowering valve - 12-piece wheels, 235/75 R 17.5 - Spare wheel holder - 24,000 kg Haacon support legs with 2-speed gearbox - Floor made of approx. 28 mm hardwood - Front steel wall, approx. 400 mm high, with lid as tool box - 5 pcs. aluminium drop-in side walls, approx. 2,000 x 400 mm, anodised - 8 lashing rings, max. tensile force approx. 3,200 kg - 22 lashing hooks made of 16 mm round bar, mounted below the edge frame - Bevelled corners at the front, rear taper approx. 1,600 mm - 20 stake pockets in the loading area - Mechanical supports at the rear of the vehicle - Preparation for retractable extensions - 2 electro-hydraulic ramps, approx. 1,520 x 1,250 mm - 1 transfer trestle with 2 removable stanchions - 8 removable stanchions - NATO socket - ABS socket

Condition: used, overall weight: 60,000 kg, axle configuration: > 3 axles, first registration: 02/2011, Year of construction: 2011, Internal Vehicle No.: 001692 Location: Jaweed GmbH in Ober Mörlen (Postal code 61239), Hasselhecker Straße 30 * Tel.: Whatsapp: Specification sheet: ---- * Low-loader * Goldhofer STZ-L4-42 / 870 A * Year of construction: 2011 * First registration: 08.02.2011 * Length: 13,400 mm * Length (extended): 16,600 mm * Width: 2,550 mm * Width (extended): 3,250 mm * Height: 3,500 mm * Unladen weight: 15,100 kg * Gross vehicle weight: 0 kg * Support load: 20,000 kg * Tyres: 235/75 R17.5 * Hydraulic remote control * Valid roadworthiness certificate (TÜV) until 01/2026 * Good condition ---- Our machinery inventory is constantly changing and always up to date on our website. We offer over 200 machines and vehicles for sale. Our location is 30 km north of Frankfurt Airport (FRA). We specialize in worldwide transport & shipping. We assume no liability for printing or typographical errors. Ijdpfx Ajx T I Hrsfhetb Our services: * Export declarations * Customs declarations * Yellow temporary license plates * Red customs plates * Purchase of your used construction equipment or commercial vehicle * We are also happy to help with financing * We offer comprehensive transport solutions Inspection of vehicles and machinery: Mon-Fri from 08:00 to 16:30 Saturday by appointment only Of course, you can also contact us by phone or WhatsApp with any questions. Jaweed GmbH Hasselhecker Straße 30 D-61239 Ober Mörlen Tel.: Mobile: This offer is non-binding and subject to change. Sale always according to our general terms and conditions (AGB). ---- Input errors, mistakes and prior sales reserved. The information provided in advertisements (Internet), price tags, and images are non-binding descriptions and do not represent guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Listed equipment must be checked separately, where applicable. Likewise, no liability is assumed for hidden defects or unspecified previous damage. Residual risk applies after disassembly of the vehicle. All details in the listings are non-binding and without guarantee. The description serves as general identification of the vehicle and does not constitute a warranty in the sense of purchase law. ----

Condition: used, empty load weight: 23,620 kg, maximum load weight: 73,580 kg, first registration: 05/2009, next inspection (TÜV): 01/2024, total length: 14 mm, total width: 25,500 mm, total height: 9,000 mm, suspension: steel-air, tire size: 245/70 R 17.5 /10mm, wheelbase: 1,300 mm, mileage: 242,697 km, front tire size: 245/70 R 17.5 /10mm, operation weight: 97,200 kg,

Condition: used, maximum load weight: 19,510 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 03/2014, total width: 2,550 mm, total height: 4,000 mm, Wiese Low Loader SA31CS - S Wabco * Force-steered 2nd axle * Two-piece rear ramps, extendable version (electrically/hydraulically) * Central section hydraulically adjustable (form-fit for driving onto gooseneck) * Maximum internal height 3480 mm with lowered central section * Maximum internal height rear section: 3110 mm * Maximum internal height front section: 2630 mm * Reversing camera * SAF axles * Drum brakes * Winch * Edscha roof Isdpfx Afsx Tx U Tohstb * Rear support * Sliding tarp on both sides * 14 pairs of small and 3 pairs of large lashing rings Sale and errors excepted! Information provided without guarantee!

Condition: used, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 07/2021, next inspection (TÜV): 04/2026, Equipment: ABS, * Meusburger, MTS-3 * 3-axle trailer, 3x 10 t axles * 1 lift axle * 2 steering axles, hydraulically forced-steered or steerable via radio or cable remote control * 6 x twist locks * Central lubrication system * Outer frame with holes * Rear drop-down support legs * BPW axles, 10 t axle load * 13 pairs of folding heavy-duty lashing rings * 6 pairs of stake pockets * Extendable warning panels * Larch wood floor * Front bulkhead storage box * SP until 10/2026, TÜV until 04/2026 * !!!!! Hot-dip galvanized + painted !!!!! * Overall width: 2.55 m * Front deck length: 4,120 mm Itjdpfxsx Udkvo Afheb * Rear deck length: 7,380 mm * Many additional extras, see pictures * !!!!! LIST PRICE IN 2021: €82,000 net !!!!!