Used Goldhofer Tp Trailers for sale (91)

Condition: used, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 12/1997, Equipment: ABS, Goldhofer 3-axle special trailer / long material transporter Type: SPZ-DL 3-38/80 Permissible total weight: 48,000 kg Permissible front axle load: 18,000 kg Permissible rear axle load: 30,000 kg Air suspension + 3 x STEERING axles Total length: 20,500 mm ! German registration ! For further dimensions, please refer to the drawing, which can also be sent in high-resolution PDF format upon request. ! More information upon request via email ! Information provided without guarantee/errors excepted! Information provided on the internet is non-binding descriptions and does not constitute warranted characteristics. The seller is not liable for errors, input mistakes, and data transmission errors. Subject to changes. Njdpowq Ai Njfx Adwold Constant buying and selling as well as trade-in and rental of crane and lifting vehicles as well as construction machines and heavy-duty vehicles.

Condition: used, maximum load weight: 66,600 kg, overall weight: 96,000 kg, axle configuration: > 3 axles, first registration: 06/2011, STHP-XLE 2+4 (285) with trailing axles Weights Speed 80 km/h Fifth wheel load 24,000 kg Axle load 6 x 12,000 kg Nodpfxjzn E Rho Adwold Permissible total weight 96,000 kg Unladen weight approx. 29,400 kg Payload approx. 66,600 kg Gooseneck length x width 3,755 mm x 2,480 mm Fifth wheel height (loaded) 1,300 mm Steering radius front / rear 1,280 mm / 2,600 mm Kingpin 3.5'' Fifth wheel load 24,000 kg 2-axle chassis at the front, single tires 285/70 R 19.5 with BPW trailing axles, 12-14 t axle load Steering: opposing steering Length 2577 mm Flatbed bridge, single-telescoping, with separation point at the rear Length x width 6,500 mm x 2,750 mm, extendable to 3,190 mm Telescoping by 2,900 mm plus 4,000 mm extension frame to 13,400 mm, overall height 300 mm Loading height (loaded) approx. 400 mm with 100 mm ground clearance 1 set of extension frames 4,000 mm 4-axle chassis at the rear, wheelbase 1360 + 1400 mm, single tires 285/70 R 19.5 with BPW trailing axles, 12-14 t axle load Steering: forced steering Length 5360 mm Excavator well in the chassis Wireless remote control Central lubrication system

Condition: used, color: yellow, Year of construction: 2008, Goldhofer STZ-L3-27/80A. Year: 2008. 7.4-ton BPW axles. Weight: 13,800 kg. Load capacity: 26,400 kg. Max. weight: 40,200 kg. Kingpin load: 18,000 kg. 7.2 meters extendable. 2 x 25 cm widened. Power steering on 3 steering axles. Aluminum decking + toolbox on the gooseneck. Hydraulic system from the trailer operates using the truck's hydraulic system. Air suspension. Spare tire. Dimensions: Gooseneck: L: 3500 mm. W: 2550 mm. H: 1550 mm. Kingpin height: 1300 mm. Floor: L: 9500 mm. W: 2550 mm. H: 800 mm. Tires: 205/65R17.5, 80% tread. Nlsdey D R Dnepfx Adwjd Radio remote control! ID No.: 684. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, as well as all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = Year of manufacture: 2008 Unladen weight: 13,800 kg Payload: 26,400 kg GVW: 40,200 kg Extendable superstructure: Yes = Company Information = For more information:

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, suspension: air, tire size: 245/70R17,5, color: yellow, Year of construction: 2008, Goldhofer STZ-VL3-36/80A. Year: 2008. 10-11.2 ton BPW axles. Max. weight: 48,000-51,600 kg. Kingpin load: 18,000 kg. Hydr. detachable gooseneck. Aluminum boards + toolbox on gooseneck. Extensions: 2 + 3 meters. 5-meter extendable. Air suspension. Central lubrication system. Power steering. Excavator bridge. 3 detachable floor sections. Nlsdpfxjy D R Dho Adwod Hydraulic system powered by the truck's hydraulics. Dimensions: Neck: L: 3500 mm. W: 2470 mm. H: 1650 mm. Kingpin height: 1300 mm. Floor: L: 8000 mm. W: 2550 mm. H: approximately 500 mm. Floor thickness: 220 mm. Rear of trailer: L: 4100 mm. W: 2550 mm. H: 1000 mm. Radio remote control. Tires: 245/70R17.5, 70%. ID No.: 686. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all agreements entered into by Heinhuis, and the negotiations preceding them. By any form of response, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further Information = Year of manufacture: 2008 Tire size: 245/70R17.5 Axle brand: BPW Suspension: Air suspension Rear axle 1: Double tires; Max. axle load: 10,000 kg; Steerable; Tire tread depth left inside: 70%; Tire tread depth left outside: 70%; Tire tread depth right inside: 70%; Tire tread depth right outside: 70% Rear axle 2: Double tires; Max. axle load: 10,000 kg; Steerable; Tire tread depth left inside: 70%; Tire tread depth left outside: 70%; Tire tread depth right inside: 70%; Tire tread depth right outside: 70% Rear axle 3: Double tires; Max. axle load: 10,000 kg; Steerable; Tire tread depth left inside: 70%; Tire tread depth left outside: 70%; Tire tread depth right inside: 70%; Tire tread depth right outside: 70% GVWR: 51,600 kg Extendable structure: Yes = Company Information = For more information:

Condition: used, maximum load weight: 36,020 kg, overall weight: 45,500 kg, axle configuration: 3 axles, first registration: 04/2022, next inspection (TÜV): 04/2027, loading space length: 12,400 mm, loading space height: 900 mm, total width: 2,550 mm, Vehicle / Structure: Low-loader semi-trailer with 2 pairs of wheel recesses Overall length: 13,220 mm Loading length: total 12,400 mm Width: 2,550 mm Loading height: 900 mm Further information: - 2 pairs of wheel recesses, removable and extendable - Long, deep excavator arm recess - Large lashing package - Lift axle - Self-steering trailing axle - BPW axles - ALTEC ramps with spring lifting system, detachable - Galvanized and painted - Front storage box - 3m extension width - Warning signs - Beacon - Climbing strips - Rubber-coated loading area - LED lights + LED reversing lights - Gallows chain holders - Rear support Nsdpjxxxpxsfx Adwsld Vehicle is available immediately - further low-loader semi-trailers, both new and used, available from stock immediately.

Condition: good (used), first registration: 10/2007, total length: 10,500 mm, total width: 2,550 mm, total height: 880 mm, color: yellow, Year of construction: 2007, Unladen weight: 6,600 kg Payload: 23,400 kg GVWR: 30,000 kg Loading platform height: 88 cm Technical condition: good Njdpfx Adjzlfbueweld Optical condition: good Goldhofer TU 3-24/80 3-axle low-bed trailer Manufacturer: Goldhofer Type: TU 3-24/80 Design: 3-axle low-bed trailer Technical payload: 30,000 kg Unladen weight: 6,600 kg Drawbar: 50 mm Vehicle description Equipment * 3-axle Goldhofer low-bed trailer * Robust and torsion-resistant frame construction * Partially hydraulically operated access ramps * BPW axles * Leaf-sprung axles * 50 mm drawbar * Low loading height for safe transport * Ideal for professional heavy-duty and machinery transport Dimensions * Loading platform length: 830 cm * Loading platform width: 255 cm * Can be widened on both sides by 21.5 cm each * Maximum loading platform width when extended: 298 cm * Loading platform height: 88 cm Access ramps * Partially hydraulically operated * Ramp length: 365 cm * Ramp width: 80 cm per ramp * Suitable for machines with steel tracks and wheeled machines * Low approach angle for safe loading and unloading ### Technical data * Axles: BPW * Suspension: Leaf spring suspension * Unladen weight: 6,600 kg * Technical payload: 30,000 kg * Robust construction for daily professional use Application areas The Goldhofer TU 3-24/80 is ideally suited for the transport of: * Excavators * Wheel loaders * Bulldozers * Mobile cranes * Aerial work platforms * Road construction machinery * Agricultural machinery * Industrial machinery * Containers and other heavy vehicles and equipment We would be happy to invite you to a non-binding inspection of the trailer.

Condition: used, maximum load weight: 71,000 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, first registration: 02/2015, Weights, Speed 80 km/h Saddle load 30,000 kg Axle load 6 x 12,000 kg Permissible total weight 102,000 kg Unladen weight approx. 31,000 kg Payload approx. 71,000 kg Payload with 22 t saddle load 63,000 kg Gooseneck Length x width 3,775 mm x 2,480 mm Saddle height (laden) 1,300 mm Turning radius front / rear 1,300 mm / 2,700 mm, kingpin 3.5'' Saddle load 30,000 kg Unladen weight 5,000 kg 2-axle THP-UT chassis, front, single tires 245/70 R 17.5 with trailing axles, 12-14 t axle load Steering, axle arrangement, counter-steering Wheelbase 1500 mm Chassis width 2750 mm Unladen weight 6000 kg Low-bed, single-telescopic with separation point at the rear Length 7,400 mm + 4,800 mm extendable to 12,200 mm Telescopic by 4,800 mm Width 2,750 mm, extendable to 3,250 mm Height 310 mm Loading height laden approx. 460 mm with 150 mm ground clearance 4-axle MPA chassis, excavator well at the rear, single tires 245/70 R 17.5 with MPA axles, 12 t axle load Steering, forced steering Wheelbase 1510 mm Chassis width 2750 mm Ride height 935 mm +165 mm -150 mm Nlsdpfx Aszmll Aodwed Unladen weight with bed 20,000 kg Excavator well 805 mm wide, 375 mm deep Radio remote control Central lubrication system

Condition: used, Year of construction: 2002, 2002 Goldhofer STZ-L5-55/80: Available with short notice. Nodpfjzarf Djx Adwjld 5-axle low-bed trailer 1st axle steered 4th and 5th axles steered 3.5-inch kingpin This offer is non-binding and does not include any guarantee or warranty. Subject to prior sale. A reservation requires a deposit of 10% of the purchase price. Until payment is received, no reservation or claim to availability exists. The purchase is only concluded upon receipt of payment. The vehicle remains the property of MSG Andert GmbH until fully paid. Payments are accepted exclusively in euros, without any additional costs to the seller, and only by bank transfer. No checks accepted.

Condition: used, maximum load weight: 17,500 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 07/2004, loading space length: 8,300 mm, loading space width: 2,500 mm, loading space height: 900 mm, total width: 2,550 mm, Total weight: 24,000 kg / 30,000 kg Unladen weight: 6,500 kg Payload: 17,500 kg / 23,500 kg Overall length: 10,600 mm Loading length: 8,300 mm total Width: 2,550 mm / Loading width 2,500 mm Loading height: 900 mm Additional information: - 40 km/h - Widening to 3 m - Warning signs, front and rear Nlsdpfszi I Ewex Adwod - Twin tires - BPW axles - Large lashing kit - Hydraulic ramps, split, approx. 700 x 3,600 mm - Plastic tool box

Condition: used, overall weight: 11,500 kg, first registration: 12/1994, Structure: Nsdszix Rqepfx Adwsld Very good condition, fully extendable to a total length of 18.5 m.

Condition: used, maximum load weight: 85,100 kg, overall weight: 106,000 kg, axle configuration: > 3 axles, first registration: 11/2009, loading space length: 19,390 mm, loading space width: 2,470 mm, total width: 2,550 mm, total height: 1,950 mm, Equipment: ABS, Technically possible: 8 x 14 t axles, ABS, EBS, BPW axle(s), lift axles, hydraulic suspension, 6 hydraulically steered axles, 1st + 2nd axle are lift axles, drum brake system, 13 heavy-duty lashing rings per side, 8 stake pockets per side, 2 central stake pocket rails on the loading area, rotating beacon at the rear, towing coupling, loading height: approx. 1500 mm. Vehicle may feature advertising decals and/or signage. SI82739 Nsdpfx Ajv I It Nsdwjld Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer through our partner workshops! Vehicle may feature advertising decals and/or signage. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: used, axle configuration: > 3 axles, first registration: 01/1985, total width: 3,780 mm, total height: 3,330 mm, Special low-loader for heavy transport, payload approx. 60,000 kg to 80,000 kg depending on application, whether for road or internal use. Loading platform length with slope approx. 12,400 mm, width 3,200 mm, extendable to 3,700 mm. Hydraulic axle compensation, hydromechanical steering on 6 axles (front and rear), 4 x hydraulic support cylinders, hydraulic ramp at front and rear, loading possible from both sides, towing hitch on both sides. Ideal for shunting or transport in very confined spaces. The vehicle may have advertising and/or signage applied. Njdpfjyc Amdsx Adwold

Condition: new, empty load weight: 11,800 kg, maximum load weight: 36,700 kg, overall weight: 48,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,550 mm, loading space height: 855 mm, suspension: air, tire size: 245/70 R17.5, color: grey, Equipment: ABS, Gooseneck, rigid, in center tube design: -Front corners 90° Nlsdpfx Adezdz Iujwjd -Closed outer frame with cutouts for tie-down straps -Hole strip for aluminum loading ramps -2" kingpin -Mechanically operated BPW landing gear on the right side in the direction of travel -550 mm long, 8° bevel at the end of the gooseneck -3 pairs of lashing eyes recessed in the loading platform of the gooseneck; 2 pairs of beam pockets 100 x 50 mm in the loading platform of the gooseneck Loading platform: -Closed outer frame with cutouts for tie-down straps -Fixed front section 360 mm -Floor covering: sheet metal with anti-slip coating -Excavator recess including elongated holes for securing the load -1 pair of permanently installed wheel recesses in front of the first axle, 390 mm deep including climbing strips in the bevel -1 pair of permanently installed wheel recesses between the first and second axles, 390 mm deep, including climbing strips in the bevel -Technically maximum extension of 3,740 mm -Aluminum wheel recess cover "Premium", full width 600 mm, extendable to 3,000 mm with 8 t wheel load -Different wheel recess depths by using the wheel recess cover (depth approx.: 390 mm and 260 mm) -Beveled vehicle rear 8°, 550 mm long -Slider design for easy installation and removal of ramps -Mechanical, spring-assisted comfort support legs at the rear of the vehicle for support during the loading process -Continuous mud flap at the rear -1 pair of lashing points LC 10,000 daN in the middle at the beginning of the loading platform -1 pair of lashing points LC 10,000 daN in the middle in the rear area of the loading platform -7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform 3-axle chassis: -Axle manufacturer BPW ECO Max, air-sprung -Twin tires 245/70 R17.5 with 12 t axle load -Tire pressure monitoring system (TPMS) with tire pressure sensors installed on the rim -2 axles with hydraulic forced steering and 1 fixed axle -Braking system manufactured by Knorr (according to EU regulations with EBS-E) -TIM G2 from Knorr (Trailer Information Module) -Vehicle stability control RSS (Roll Stability Support) -Standard second loading height at 895 mm (-100/+100) -Operation of the trailing axle via radio remote control or button on the gooseneck, including single-axle function -Load-dependent lift axle on the first axle including starting aid (forced lowering of the lift axle via TIM is possible) Ramps, 2-piece: -LxW 4,300 x 800 mm -Load capacity 38t; floor covering: larch -Integrated mechanical locking in the ramp lifting cylinder to secure the ramp in the transport position -Ramp operation: lifting mechanism and shifting hydraulically -The radio remote control for controlling the trailing axle can also be used to control the rear functions -Electro-hydraulic unit for ramp operation Included accessories: -Headboard including parking position for rear wall, approx. 400 mm high -Spare wheel holder standing at the front of the gooseneck, including spare wheel loose -Wheel chocks incl. holder -Beams for widening to 3,000 mm -Aluminum drop-side gates 400 mm high, consisting of 2 side gates, length approx. 3,150 mm, and rear gate with beams (galvanized) -2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and socket for revolving beacon -One attachable partition plate at the end of the excavator recess -Traffideckgo rubber coating, construction height 8 mm in the outer area of the loading platform including rear bevel, without fixed loading plat

Condition: new, empty load weight: 11,800 kg, maximum load weight: 36,700 kg, overall weight: 48,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,550 mm, loading space height: 855 mm, suspension: air, tire size: 245/70 R17.5, color: grey, Equipment: ABS, Gooseneck, rigid, in a center tube design: -Front corners 90° -Closed outer frame with cutouts for lashing straps -Hole strip for aluminum loading ramps -2" kingpin -Mechanically operated BPW landing gear on the right side in the direction of travel -550 mm long, 8° incline at the end of the gooseneck -3 pairs of lashing rings recessed in the loading area of the gooseneck, 2 pairs of beam pockets 100 x 50 mm in the loading area of the gooseneck Loading platform: -Closed outer frame with cutouts for lashing straps -Fixed front section 360 mm -Floor covering: sheet metal with anti-slip coating Nlodpfjzdzunjx Adwod -Excavator well incl. elongated holes for load securing -1 pair of permanently installed wheel wells in front of the first axle, 390 mm deep incl. climbing strips in the incline -1 pair of permanently installed wheel wells between the first and second axles, 390 mm deep, incl. climbing strips in the incline -Technically maximum extension of 3,740 mm -Aluminum wheel well cover "Premium", full width 600 mm, can be extended to 3,000 mm with 8 t axle load -Different wheel well depths by using the wheel well cover (depth approx.: 390 mm and 260 mm) -Inclinined vehicle rear 8°, 550 mm length -Sled design for easy attachment and removal of ramps -Mechanical, spring-supported comfort outrigger supports at the rear of the vehicle for support during loading -Continuous mud flap at the rear -1 pair of lashing points LC 10,000 daN in the middle at the start of the loading platform -1 pair of lashing points LC 10,000 daN in the middle in the rear area of the loading platform -7 pairs of lashing points LC 10,000 daN in the outer frame of the loading platform 3-axle chassis: -Axle manufacturer BPW ECO Max, air-suspended -Twin tires 245/70 R17.5 with 12 t axle load -Tire pressure monitoring system (TPMS) with tire pressure sensors mounted on the rim -2 axles with hydraulic forced steering and 1 rigid axle -Braking system manufactured by Knorr (according to EU regulations with EBS-E) -TIM G2 from Knorr (Trailer Information Module) -Vehicle stability control RSS (Roll Stability Support) -Standard second loading height at 895 mm (-100/+100) -Operation of the trailing steering system via a wireless remote control or button on the gooseneck, incl. single-axle function -Load-dependent lift axle on the first axle incl. starting aid (forced lowering of the lift axle possible via TIM) Ramps, 2-piece: -L x W 4,300 x 800 mm -Load capacity 38 t; floor covering: larch -Integrated mechanical locking mechanism in the ramp lifting cylinder to secure the ramps in the transport position -Ramp operation: lifting and shifting hydraulically -The wireless remote control for controlling the trailing steering system can also be used to control the rear functions -Electro-hydraulic unit for ramp operation Included accessories: -Headboard incl. parking position for rear panel, approx. 400 mm high -Spare wheel holder standing at the front of the gooseneck, incl. spare wheel -Chocks incl. holder -Beams for widening to 3,000 mm -Aluminum plug-in side boards 400 mm high, consisting of 2 side boards, each approx. 3,150 mm long, and rear side board with beams (galvanized) -2 pairs of warning signs 423 mm x 423 mm, with 2 position lights and socket for flashing beacon -One plug-in partition plate at the end of the excavator well -Traffideckgo rubber covering, 8 mm construction height in the outer area of the loading platform including rear incline, without fixed loading platform section in the

Condition: used, overall weight: 58,000 kg, axle configuration: > 3 axles, first registration: 06/1998, total width: 2,550 mm, Equipment: ABS, Vehicle identification number: WG0STZL47W0022918 Unladen weight: 15,900 kg DE – TÜV inspection due Fifth wheel height: 3,500 mm Low-bed: Length: 8,400 mm (including sliding table – 300 mm) – Width: 2,550 mm – Loading height: 850 – 900 mm TELESCOPICALLY EXTENDABLE by 10,900 mm WIDTH-EXTENDABLE to 3,000 mm – with width extension lighting Split ramps, hydraulically adjustable in height, 2,500 + 1,200 mm long – 700 mm wide Container locking mechanism Central lubrication system Front fifth wheel load: max. 18,000 kg Fifth wheel height: approx. 1,250 – 1,300 mm – kingpin 2" Technically permissible axle loads: 4 x 10,000 kg BPW Eco axles with drum brakes 4 x hydraulically forced steering Tires: 235/75 R 17.5 Nsdpfxszfuhqj Adweld Changes, prior sale and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase agreement shall be decisive. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings Nlodpfxox Suzas Adwed * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: used, axle configuration: > 3 axles, first registration: 08/2002, loading space length: 7,800 mm, loading space width: 2,550 mm, loading space height: 400 mm, total length: 17,340 mm, total width: 2,550 mm, suspension: air, Year of construction: 2002, Additional information : Brand: GOLDHOFER Model: STZ-VL4 Structure: low loader ( lower platform 7800 mm + 4900 mm extendable / higher platform 5400 mm loading height 400 mm ) Year: 08.2002 Nledpfouwtyqjx Adwod Suspension: air Brakes: drum Dimensions: L/W: 17340 mm + 4900 mm extendable / 2550 mm Masses: full / empty: 50000 kg / 12840 kg Suspension type : air Brakes : Drum Suspension type : air Brakes : Drum Steering : Steering Suspension type : air Brakes : Drum Steering : Steering Suspension type : air Brakes : Drum Steering : Steering = More information = Suspension: air suspension Middle axle 1: Steering Middle axle 2: Steering Rear axle: Steering Empty weight: 12.840 kg Carrying capacity: 37.160 kg GVW: 50.000 kg

Condition: used, maximum load weight: 52,100 kg, overall weight: 70,000 kg, axle configuration: > 3 axles, first registration: 08/2008, next inspection (TÜV): 12/2025, loading space length: 15,800 mm, total width: 2,550 mm, Equipment: ABS, Goldhofer Lowbed Trailer with Gooseneck - 5 axles - 1st axle liftable - Last four axles forced steered - Central lubrication system - BPW axles - Tyre size: 235/75 R17.5 - Drum brakes - Permissible gross weight: 70,000 kg - Unladen weight: 17,900 kg - Safety inspection due: TÜV due: 12/2025 - Loading height: 0.85 m - Loading width: 2.55 m - Lowbed length: 12.0 m - Gooseneck length: 4.0 m - Extendable up to 24.4 m total trailer length Njdpfsw S S Uvsx Adwjld Errors and prior sale excepted. Internal vehicle number: 11177 WhatsApp support available! If you have any questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. Whatsapp Whatsapp

Condition: used, maximum load weight: 32,460 kg, overall weight: 43,220 kg, axle configuration: 3 axles, first registration: 04/2023, next inspection (TÜV): 01/2027, loading space length: 13,520 mm, loading space width: 2,550 mm, Equipment: ABS, ? "Stepstar MEGA" ? Low construction height ? 3rd axle friction-steered ? Extendable ? Widenable ? Hydraulically laterally adjustable ramps ? Hydraulic support legs ? Fifth wheel height (loaded): 950 mm ? Fifth wheel load: 18.50 t ? Permissible total weight: 43.22 t ? Total train length: 16,470 mm ? Gooseneck length: 3,700 mm ? Steering angle / radius front / rear: 1,845 / 2,100 mm ? Vehicle width: 2,550 mm ? Rear overhang: 2,400 mm ? 2" king pin ? Electric winch from Horntools with 8.00 t pulling force, radio remote control, 26 m steel cable and cable guide ? BPW ECO Max axle manufacturer ? 2 x rigid axle ? 1 x friction-steered axle ? Reverse steering lock for friction-steered axle(s) activated via reverse gear ? Standard second loading height at 820 mm (-100/+100) ? Load platform single telescopic ? Technical maximum extension of 4,465 mm ? Hydraulic support legs at rear of vehicle for stabilisation during loading ? 1 pair of LC 10,000 daN lashing points centrally on the load platform behind the gooseneck ? 1 pair of LC 10,000 daN lashing points centrally in the rear area of the load platform ? 8 pairs of LC 10,000 daN lashing points in the outer frame of the load platform ? 7 pairs of 100 x 50 mm stake pockets in the outer frame of the load platform ? Wooden widening boards (larch) ? Ramp, 1-piece ? Length: 3,000 mm ? Width: 800 mm ? Load capacity: 38.0 t ? Ramp operation (lifting and shifting hydraulically) hydraulic ? Electro-hydraulic unit for ramp operation ? Ramp mounted on vehicle ? Ramp operation via wireless remote control ? NATO socket 2-pole 24 V for operating the hydraulic ramp or the winch ? Air connections with Duomatic couplers ? Drum brakes ? ABS ? Air suspension ? EBS Nodpfxjyndr Ej Adwjld ? Landing legs ? Dual tires ? BPW axles All information without guarantee / subject to prior sale.

Condition: used, maximum load weight: 120,000 kg, axle configuration: > 3 axles, first registration: 10/1993, Year of construction: 1993, Equipment: ABS, Manufacturer: GOLDHOFER Type: THP-SL Year of manufacture: 1993 / 2010 consisting of: - gooseneck with hydraulic unit (year of manufacture: 1993 - hydraulics: 2003) - 2-axle chassis module (year of manufacture: 2010) - 3-axle chassis module (year of manufacture: 1993) - 4-axle chassis module (year of manufacture: 1993) - excavator bed 5.8m rigid (year of manufacture: 2010 - payload 100 tons) - excavator bed 8m + 5m extendable (year of manufacture: 1993 - payload 120 tons) Nlodpfot Irxxsx Adwjd Available immediately. Subject to errors and prior sale.

Condition: used, empty load weight: 9,600 kg, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 10/2012, loading space length: 8,800 mm, loading space width: 2,500 mm, loading space height: 860 mm, color: silver, Year of construction: 2009, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * 1st hand * Condition, see photos * Low-loader Goldhofer, type STN-L3-39/80 * 3-axle low-loader with extra long ramps * Ramps hydraulically operated and laterally adjustable * Loading length 8.80 m x 2.50 m * Loading height 0.85 m * SKF axles * 2 supports * Steerable trailing axle * Leaf/air suspension with lift/lower function * DIN heavy-duty lashing rings * EBS * ABS (Anti-lock Braking System) * Tool box * Twin tires * Permissible total weight up to 48,000 kg * Unladen weight 9,600 kg * Payload 38,400 kg If a new technical inspection (TÜV) is required, we will be happy to provide a quote via our partner workshops. Our offer generally does NOT include new TÜV certification, new DGUV, new SP, or new UVV inspection. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: Nlsdpfewxm Ilsx Adwsd We offer and strongly recommend a viewing and inspection of the goods to avoid any misconceptions about their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in this offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, empty load weight: 8,400 kg, maximum load weight: 15,600 kg, overall weight: 24,000 kg, first registration: 08/1993, next inspection (TÜV): 10/2022, loading space length: 10,000 mm, loading space width: 2,500 mm, suspension: air, tire size: 9.5R 17.5, color: other, gearing type: other, front tire size: 9.5R 17.5, rear tire size: 9.5R 17.5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Sales contacts: Frank Rau / Russian / English / German - Bachar Ibrahim / Arabic / English / German - Registration service, HU/SP/UVV, delivery to port Very long loading platform – 10.00 m! Hydraulic ramps Ready for operation Width-adjustable Nodpfx Asww Dwhjdwsld Grey-black Additional features: ABS, turntable, air brake, EBS, air suspension, price on request (Mobile), Suspension: air, Payload (kg): 15,600 Body type: width-adjustable, top condition, 10.00 m loading platform, HSN/TSN: 6631/000 Subject to errors and omissions.

Condition: used, maximum load weight: 18,000 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 12/1991, loading space length: 8,200 mm, loading space width: 2,500 mm, Equipment: ABS, * ABS * BPW axles Nlsdpjwdb Ttefx Adwjd ----Construction: Low-loader trailer (2200+6000mm), loading height approx. 900mm, sloped rearward, drive-on height approx. 750mm, steel/wooden floor, extendable to 3m, spring-loaded loading ramps, lashing rings. Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE REGARDING EQUIPMENT AND ACCESSORIES. Our Terms and Conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders, and sales negotiations (see Legal Notice).

Condition: used, empty load weight: 15,000 kg, maximum load weight: 39,895 kg, overall weight: 54,895 kg, axle configuration: 3 axles, first registration: 10/1989, loading space length: 13,600 mm, loading space width: 2,750 mm, loading space height: 650 mm, total length: 2,750 mm, total width: 3,500 mm, suspension: air, tire size: 8.25R15, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 3 axles, BPW axles, air suspension, forced steering, lift and lower function, lashing eyes, two-part loading ramps, hydraulic ramps. Superstructure: hydraulically liftable low-bed trailer, hydraulic ramps. The trailer was partially overhauled in 2009 for EUR 11,000: NEW FLOOR, etc., and has not been used since. It can be widened from 2750 mm to 3250 mm. Loading length in the low-bed = 5850 mm, loading length over axles = 4250 mm, loading height over gooseneck approx.: 1620 mm, over loading area approx.: 650 mm, over axles approx.: 940 mm. 1/3 of the low-bed can be hydraulically raised! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Nsdpfsi Rqi Ssx Adwold

Condition: used, empty load weight: 6,350 kg, maximum load weight: 23,650 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 09/2005, loading space length: 6,800 mm, loading space width: 2,500 mm, loading space height: 900 mm, total length: 2,550 mm, total width: 3,500 mm, suspension: steel, tire size: 235/75R17.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, BPW axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing rings, mechanical ramps, rear support, side aluminium underrun protection, twin tyres, storage box. Body: 3-axle low-loader trailer with mechanical ramps. ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Nodpfxoy Efdlo Adwsld