Used Müller Tractors for sale (249)

Condition: used, empty load weight: 2,380 kg, maximum load weight: 8,320 kg, overall weight: 10,700 kg, axle configuration: 2 axles, first registration: 04/2016, next inspection (TÜV): 06/2026, loading space length: 5,030 mm, loading space width: 2,010 mm, loading space height: 325 mm, suspension: steel, tire size: 235/75R17.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, mechanical ramps, front support, rear support, side aluminium underrun protection, tool box, height-adjustable drawbar. Gsdpoxqhltjfx Adtekd Body: tandem low-bed trailer with mechanical loading ramps, galvanized access ramps, 2x BPW axle, drum brakes! Loading height approx. 700 mm! Ramp length approx. 2200 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, maximum load weight: 8,830 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 07/2019, next inspection (TÜV): 06/2026, loading space length: 5,000 mm, loading space width: 2,400 mm, loading space height: 500 mm, total width: 2,550 mm, total height: 1,550 mm, Equipment: ABS, For sale is a Müller Mitteltal tandem three-way tipper trailer with loading ramps (model TA-2, KA-TA-R 11.9). Technical specifications: - Internal dimensions: approx. 5,000 mm x 2,400 mm x 500 mm - Overall dimensions: approx. 7,150 mm x 2,550 mm x 1,550 mm - Permissible total weight: 11,900 kg - Payload capacity: approx. 8,830 kg - Wheelbase: 990 mm - Tyres: 235/75 R17.5-inch - Loading height: approx. 950 mm - Axles from renowned manufacturers - Suspension system - Braking system Gkjdpfx Adsxp Twrotjd - ABS brake system - Braking system according to EC Directive 71/320/EEC, etc., with ABS 2S/2M and spring-actuated parking brake - Chassis axles from premium brands, S-cam brakes, large, low-maintenance tandem compensation system with 80 mm wide parabolic springs - Drawbar with infinitely variable height adjustment via winch. All supply lines to the towing vehicle are routed protected within the hot-dip galvanized drawbar. - Chassis with 2 storage compartments for aluminium ramps, hot-dip galvanized. - Tipping system: three-way tipper system with motorized hydraulics - Tipper body floor made of fine-grained steel - Side walls laser-welded from fine-grained steel, front wall fixed from smooth sheet metal, side walls with internal tube reinforcements and gas struts. Side and rear walls can pivot, fold down, and be removed (central locking). Rear wall with supporting cables. - Tipping angle to the side and rear: 48° - etc. Viewing appointments and test drives by prior telephone arrangement. All information provided online is non-binding. They do not constitute warranted characteristics. The seller is not liable for typographical or data transmission errors. Subject to change and prior sale.

Condition: used, empty load weight: 4,420 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/2008, loading space length: 5,000 mm, loading space width: 2,410 mm, loading space height: 950 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 R 22,5, wheelbase: 1,310 mm, color: green, Equipment: ABS, Drum brake EBS Payload 13,580 kg Swinging and folding aluminum side drop sides with lifting springs Godpfxerz Rtme Adtekd Rear steel dropside BPW axles Errors excepted

Condition: used, axle configuration: > 3 axles, first registration: 04/2000, loading space length: 10,790 mm, loading space width: 2,500 mm, loading space height: 950 mm, total length: 14,790 mm, total width: 2,500 mm, suspension: steel, Year of construction: 2000, Additional information : Brand: MÜLLER MITTELTAL Model: TS4 Structure: low loader ( platform L=10790 mm / W=2500 mm / H=950 mm ) Year: 2000 Suspension: steel Brakes: drum Dimensions: L/W: 14790 mm / 2500 mm Gkodpfsuwu Ezex Adtod Masses: full/empty: 57000 kg / 11800 kg HYDRAULIC RAMPS / STEEL SUSPENSION / DRUM BRAKES = More information = Suspension: leaf suspension Empty weight: 11.800 kg Carrying capacity: 45.200 kg GVW: 57.000 kg Please contact Andrei Somov, Mark Ševtšenko or Deniss Urmaker for more information

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,380 mm, loading space width: 2,520 mm, Year of construction: 2024, * PT 30 profile: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 tonne Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smart board mounted on the trailer as an information tool (for axle load display - front and rear separately) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fender with splash guard * Rear straight galvanized. Sheet steel aprons with splash guard * Reflective contour tape on the side and rear * 15-pin power plug * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * Pull scissors 1,200 mm long with 40 mm pull eye and height adjustment via tension spring & turnbuckle * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated on the right side * Box in the bogie for accessories with hinged lid, 2 cont. locks permanently installed (directly after the bogie platform) * ROBOT welded ANTI-SLIP coating on the steel plate of the bogie platform (protruding weld beads) * La-Si package consisting of: 2 lashing eyes (13.4 tonnes) at the front left & right on the bulkhead support, front & rear 1 pair of UVV lashing rings (13.4 to.) and 3 pairs of UVV lashing rings (10 to.) on the side, swiveling and lowerable, loadable in all directions and embedded in the outer frame, 3 stake pockets on the side with simultaneous 2 ton lashing option * 6 pairs of mechanical folding booms for 3 m total width (but not in the rear slope) * Widening planks placed in the middle of the loading area Gkjdpjxptn Rsfx Adtod * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for later retrofitting of hydraulic. Ramp shift * Chassis, bogie, folding boom, drop supports and ramps hot-dip galvanized * Axles, slewing ring, air tank, drawbar painted in a black tone * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension, * New vehicle with manufacturer's warranty * Errors and interim purchase subject to reservation * Available for immediate delivery from Egestorf

Condition: used, maximum load weight: 14,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2010, next inspection (TÜV): 05/2025, loading space length: 7,000 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 1,300 mm, Year of construction: 2010, Equipment: ABS, WhatsApp MÜLLER MITTELTAL RA18 trailer for roll-off containers with outer rollers 5,500 mm ? 7,000 mm, German trailer 2nd hand Technical data Suitable for roll containers with external castors in lengths 5,500-7,000 mm inside length for pushing on from the rear. Mass: Total weight 18,000 kg Unladen weight approx. 3100kg Payload in kg approx. 14,900kg Total length approx. 9,400mm Total width in mm 2,550 Tires 385/55R22.5? approx. 40-70% Equipment: ABS/EBS plug-in connection according to ISO 7638 (5- or 7-pole) Chassis Main frame, with raised outer frame for carrying the roll containers, hot-dip galvanized Container locking system: The roll container is secured at 4 points by 2 pneumatic transverse clamping units. After the container has been pushed on, the 4 securing claws are closed by actuating a valve and the container is braced against the chassis frame At the front, the container is additionally secured by 2 plug-in parts (with empty holder), which can be inserted in different positions in the track. 2x 9to BPW 420mm drum brake axles with air suspension unit Air suspension with lowering function Welded steel frame Brake system 2-line brake system according to EC regulation EBS DUOMATIC clutch head Spring-loaded parking brake Electrical system 24 Volt Multi-chamber lights 15-pin plug with connecting cable Lighting according to EC regulations Rims: Factory silver Underride protection aluminum profiles Wheel chocks with holder 1/2 shell plastic mudguards Tool box (approx. 800x300x500) Gedpovg T Nyefx Adtskd Condition according to age and mileage! Transfer possible for an extra charge All information without guarantee! Sale only to traders or EXPORT ! ATTENTION PRICE IS NET PLUS VAT German, English: JOSEF WhatsApp: We speak the following languages: German, Czech, Polski, Romania, Russia, English

Condition: used, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, loading space volume: 10 m³, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye ? container locking ? 12 lashing rings per side ? rear view camera Godpfoxb Ig Sjx Adtokd ? drum brakes ? duomatic coupling ? ABS ? air suspension ? toolbox ? EBS ? support legs ? twin tires ? BPW axles All information subject to change / Prior sale reserved.

Condition: used, maximum load weight: 13,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2003, loading space length: 6,600 mm, loading space width: 2,470 mm, loading space height: 1,000 mm, total width: 2,550 mm, Gross weight: 18,000 kg Unladen weight: 4,250 kg Payload: 13,750 kg Overall length: 8,800 mm Loading length: 6,600 mm Width: overall width 2,550 mm / platform width 2,470 mm Loading height: approx. 1,000 mm Additional information - 800 mm side panels + fold-down tailgate - Front wall 1,200 mm - Underrun protection - Gigant axles - Twin tyres 235/75R17.5 - Air suspension - Rear ramp storage compartment - Quick lowering valve - Rail for ramps Gksdpfxoxnvkfs Adtjd - 4 heavy-duty lashing points - 6 pairs of lashing rings

Condition: used, functionality: fully functional, machine/vehicle number: 3795, empty load weight: 2,650 kg, maximum load weight: 5,950 kg, overall weight: 8,600 kg, axle configuration: 1 axle, first registration: 05/1996, next inspection (TÜV): 03/2026, loading space length: 4,520 mm, loading space width: 2,200 mm, loading space height: 500 mm, tire size: 335/65R-18 142 G, color: blue, Year of construction: 1996, 1 used tandem trailer Müller-Mitteltal Gedpfx Adsh Iviustekd * Internal number: 3795 * First registration: 05/1996 * Unladen weight: 2,650 kg * Permissible total weight: 8,600 kg * Payload: 5,950 kg * Loading area: 4,520 x 2,200 x 500 mm * Tyres: 340/65 R 18 (approved for max. 40 km/h only) Leaf-sprung tandem flatbed trailer with 'SAF' axles, front support winch, stainless steel storage box, fire extinguisher box, one-piece side panel, air brake system with drum brakes. Currently, the trailer is fitted with tyres approved for a maximum speed of 40 km/h. However, the trailer itself is approved for up to 80 km/h, as stated in the registration certificate.

Condition: used, functionality: unexamined, empty load weight: 3,700 kg, overall weight: 16,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2025, Year of construction: 1996, Equipment: ABS, Tank trailer, very well maintained... Inspection valid until 02/2025. Small dent as shown in the photo. Sold as is, directly from site. Pick up in Switzerland. Price is negotiable... 078 900 62 77 Gkedpfx Adjxn Uqdeted

Condition: new, maximum load weight: 38,900 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T5 Profile 50.0: * Wabco EBS (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Last axle with self-steering (locking the trailing axle for maneuvering purposes possible from the cab without the need for truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before entering public roads * Air suspension, lifting and lowering system with RtR valve * 3rd axle liftable (ride height +30 mm when lifted) * Forced relief and forced lowering of the lift axle for maneuvering purposes (requires truck-side installation) with speed-dependent switching via EBS electronics * Smartboard as infotool with pressure sensors to display total axle load per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Mechanical signboard package for 3 m overall width * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment * LED lighting system 12 / 24 V * Removable LED beacon at rear * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted left side * Plastic front mudguards and galvanized steel rear mudguard aprons * Turntable platform with 45° corners and 3 storage compartments with lockable hinged lids (hinges open to the rear) * Reduction of low-loader platform by 500 mm to 6,280 mm including extended offset bend by 500 mm to the front * Load securing package: 2 x 6.4 t lashing eyes at the front corners, 2 x 13.4 t UVV lashing eyes at each front and rear side corner, 5 x 10 t UVV lashing rings on each side (swiveling and lowerable, loadable in all directions), 4 stake pockets per side with 2 t lashing option, 1 x 16 t UVV lashing eye at rear cross member * Rubber covering on the folding ramp, approach slope, and on the running surface of the low-loader platform * Bamboo wood filler between side members before excavator stick support * Extendable and folding outriggers for 3 m total width (plank holders under chassis, right side) * Continuous excavator stick support with reinforcement profile from last axle to rear crossmember approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of the excavator stick support * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side-shift * Hydraulic rear support * Hydraulic flow divider (for truck hydraulic pump output over 40 l/min up to max. 140 l/min) * Loaded deck height 890 mm +/- 20 mm due to air suspension * Deck above turntable: 2,600 + 390 x 2,520 mm Gjdpfxsxptn De Adtekd * Low-bed loading area: 6,280 + 500 x 2,520 mm, incl. 860 mm approach slope * Chassis, turntable, drawbar, extension consoles, and access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from week 14/2026

Condition: used, maximum load weight: 4,500 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 07/1979, next inspection (TÜV): 04/2026, loading space length: 4,000 mm, loading space width: 1,900 mm, loading space height: 380 mm, total width: 2,500 mm, total height: 3,000 mm, Year of construction: 1979,

Condition: used, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, loading space volume: 10 m³, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye ? container lock ? 12 lashing rings per side ? rearview camera ? drum brakes ? Duomatic coupling ? ABS ? air suspension ? toolbox ? EBS ? support legs ? twin tires ? BPW axles Gksdpsxb Iglefx Adtjd All information is provided without guarantee / subject to prior sale.

Condition: used, maximum load weight: 29,750 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 03/2010, next inspection (TÜV): 05/2026, Dimensions - Length: 11,750 mm Unladen weight: 10,250 kg Axle load: 2 x 10,000 kg Load length over turntable: 2,400 mm incl. 350 mm bevel Load length: 7,700 mm incl. 900 mm bevel Loading height: 880 mm Width: 2,550 mm, extendable to 3,000 mm ? Recess for excavator arm storage (LxWxH approx. 2,500 x 740 x 180 mm) SAF axles with air suspension Godsxpmmmepfx Adtekd Two-piece hydraulic ramps: 2,100 mm + 2,000 mm long, 650 mm wide incl. Hydraulic ramps adjustable Hydraulic rear support Wheel recess after the 2nd axle: ? Front wheel recess, top length approx. 2,000 mm x 1,100 mm, bottom depth approx. 350 mm Wheel recesses between 3rd and 4th axle: ? Rear wheel recess, top length approx. 1,300 mm x 550 mm, bottom depth approx. 220 mm

Condition: used, functionality: fully functional, machine/vehicle number: 3782, empty load weight: 3,050 kg, maximum load weight: 8,850 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 05/2021, loading space length: 6,272 mm, loading space width: 2,550 mm, loading space height: 350 mm, wheelbase: 990 mm, color: red, Year of construction: 2021, 1 used tandem trailer Müller-Mitteltal * Internal number: 3782 * First registration: 05/2021 * Unladen weight: 3,050 kg * Permissible total weight: 11,900 kg * Payload: 8,850 kg * Loading area: 6,272 x 2,550 x 350 mm * Tyres: 235/75R17.5 143 J Gkjdpfexnmm Dox Adtod Maximum speed: 100 km/h Loading ramps included Support load: 1,000 kg Overall length: 8,368 mm Overall height: 1,400 mm Overall width: 2,550 mm Leaf-sprung tandem platform trailer, front support winch, storage box, one-piece drop side, air brake system with drum brakes.

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Equipment: ABS, tail-lift, Reference number for inquiries: 23185-O * Available immediately New Müller-Mitteltal KA-TA-R 11.9 tandem low loader three-way tipper trailer with ramps * Tyres: 385/55 R19.5 (4 units), BPW axles, parabolic suspension, drum brakes * Gross weight: 11,900 kg, payload: 8,750 kg * Tyre pressure monitoring system with cab display via EBS signal * EBS 24 Volt Gkjdpfx Adsxmpd Aotod * Side marker lamps with indicator function * LED lighting system for 12V and 24V * 2 LED reversing lights at the rear (suitable for 12V and 24V) * Galvanised floor, 5m x 2.42m x 0.5m, laser-welded drop sides, swingable, folding, and removable, prepared for retrofitting side wall extensions * Retaining cables for rear wall * Lockable compartment under the tipping body for loading ramp * Includes aluminium ramps, 8t load capacity, 3.57m long, stored in ramp compartment under the tipping platform * Front wall hot-dip galvanised * 4 UVV lashing rings LC 5000daN, front and rear + 8 recessed and foldable lashing eyes LC 3000daN centred in the tipper floor * Continuously height-adjustable, hot-dip galvanised drawbar, 40mm towing eye * Net hooks * Bolted, galvanised rear stanchions * 1 plastic toolbox fitted to the right side of the chassis frame * Access step in front of the front wall ---- We are an authorised Müller-Mitteltal dealer ---- * e.g., €5⁄net per month over 60 months with no down payment and no final residual value. An offer from our financing partner FM LeasingPartner * We will gladly send you a non-binding offer. ---- Our opening hours ---- Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside business hours, we are available by appointment. We speak German, English, Polish, and French. WhatsApp Leasing, financing, and trade-in options available ----

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * RDÜ (tire pressure monitoring system) * Drum brakes * 3 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Center axle liftable * Pneumatically lowerable drawbar, 2,100 mm long, with 50 mm towing eye & height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, mounted right side * Contour marking tape, reflective on sides and rear * Side underrun protection * Plastic quarter mudguards with splash guards * Plastic rear impact protection buffers * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with roll container recesses in turntable area * Suitable for roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-way clamp lock and mechanical plug-in stop angles at the front in the guide rails * Load securing certificate according to DIN 30722-1 Gsdpfx Adopk D Iiotjkd * Transport possible for up to 2 skip containers up to max. 10 m³ volume * Including 8 repositionable skip stoppers for lateral centering; front 4 skip stoppers plug-in with oscillating stop * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips * Four cloverleaf-style lashing bars (side) and one pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Welded bead as anti-slip coating in the rolling path area of the approach ramp * Mechanical drop supports at the rear * 1 pair of aluminum drive-on ramps (16 t / pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) * Tires 235/75 R17.5 * Loaded height approx. 1,003 mm * Payload 18,900 kg * Technically permissible gross vehicle weight 27,000 kg * Axles, turntable, drawbar and air tanks painted in black * New vehicle without initial registration, with manufacturer’s warranty * Subject to errors and prior sale * Available from week 50/2025

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * RDÜ (tire pressure monitoring system) * Drum brakes * 3 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Lifting center axle * Pneumatically lowerable drawbar, 2,100 mm long with 50 mm towing eye and height adjustment device * Tool box made from powder-coated steel and spare wheel holder with basket design, mounted on the right side * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumpers * LED tail lights * 15-pin electrical connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers * Steel floor with roller depressions in the bogie area Gksdpfx Adjpk D Awotjd * Suitable for roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-point container locking as well as mechanical plug-in front stops in the runner tracks * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume each possible * Includes 8 repositionable skip stops for lateral centering, front 4 skip stops plug-in with oscillating stops * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices to secure the skips by positive and frictional locking * 4 cloverleaf-design lashing bars on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead as anti-slip coating in the ramp track area * Mechanical rear support legs * 1 pair of aluminum loading ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) * Tires: 235/75 R17.5 * Laden ride height: approx. 1003 mm * Payload: 18,900 kg * Technical gross vehicle weight: up to 27,000 kg * Axles, turntable, drawbar, and air tank painted black * New vehicle without initial registration, covered by manufacturer's warranty * Subject to errors and prior sale * Available from week 50/2025

Condition: new, maximum load weight: 38,900 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T5 Profile 50.0: * Wabco EBS (Electronic Braking System) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Last axle with self-steering (locking the trailing axle for maneuvering purposes possible from the cab without the need for truck-side installation, and additionally via a switch on the trailer); lock must be disengaged before entering public roads * Air suspension, lifting and lowering system with RtR valve * 3rd axle liftable (ride height +30 mm when lifted) * Forced relief and forced lowering of the lift axle for maneuvering purposes (requires truck-side installation) with speed-dependent switching via EBS electronics * Smartboard as infotool with pressure sensors to display total axle load per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Mechanical signboard package for 3 m overall width * Drawbar 1,500 mm long with 50 mm draw eye and manual height adjustment * LED lighting system 12 / 24 V * Removable LED beacon at rear * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm, mounted left side * Plastic front mudguards and galvanized steel rear mudguard aprons * Turntable platform with 45° corners and 3 storage compartments with lockable hinged lids (hinges open to the rear) * Reduction of low-loader platform by 500 mm to 6,280 mm including extended offset bend by 500 mm to the front * Load securing package: 2 x 6.4 t lashing eyes at the front corners, 2 x 13.4 t UVV lashing eyes at each front and rear side corner, 5 x 10 t UVV lashing rings on each side (swiveling and lowerable, loadable in all directions), 4 stake pockets per side with 2 t lashing option, 1 x 16 t UVV lashing eye at rear cross member * Rubber covering on the folding ramp, approach slope, and on the running surface of the low-loader platform * Bamboo wood filler between side members before excavator stick support * Extendable and folding outriggers for 3 m total width (plank holders under chassis, right side) * Continuous excavator stick support with reinforcement profile from last axle to rear crossmember approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on sides of the excavator stick support * Hydraulic folding ramp with dual-circuit hydraulics and deployable tip section approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side-shift * Hydraulic rear support * Hydraulic flow divider (for truck hydraulic pump output over 40 l/min up to max. 140 l/min) * Loaded deck height 890 mm +/- 20 mm due to air suspension * Deck above turntable: 2,600 + 390 x 2,520 mm Gjdpfsl Tihusx Adtokd * Low-bed loading area: 6,280 + 500 x 2,520 mm, incl. 860 mm approach slope * Chassis, turntable, drawbar, extension consoles, and access ramps hot-dip galvanized * Drawbar, axles, hydraulic axle supports, and air tanks painted in black tone * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from week 14/2026

Condition: new, maximum load weight: 27,940 kg, overall weight: 36,000 kg, axle configuration: 3 axles, Year of construction: 2025, * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function as well as RtR valve * Traction assistance for shunting, activated on the first axle via EBS – without truck-side installation – with lifted lift axle + 30 mm driving height * Smart-Board infotool mounted on the trailer, equipped with pressure sensors for total axle load display * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle activated from the cab for maneuvering purposes via EBS (without truck-side installation) * 2" king pin * 1 liftable axle * Side underrun protection * Front aluminum drop-down supports and rear swivel supports on the chassis * Alcoa LVL One aluminum rims * 15-pin power connector * LED lighting 12 / 24 V * Rear removable LED rotating beacon * 2 additional LED reversing lights * 2 LED work lights mounted laterally on the trailer (without truck-side installation) * 7-pin socket at the rear for oversize load lighting * Side marker lights with indicator control * Tire pressure monitoring system with display capability in the truck via EBS signal (without truck-side installation) * Mechanically adjustable warning sign packages front and rear * Straight steel mudguards * Semi-trailer platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with top hinged lid and side doors in the chamfered corners * 400 mm high aluminum side walls (RAL 9010 pure white) on the sides of the semi-trailer platform, foldable and removable * Rear panel inserted, height 150 mm Gkjdpfx Aewh Hdxodtjd * Rear slope on the semi-trailer platform to the low bed, approx. 700 mm long with anti-slip tread plate surface and a perforated strip at the end for hanging on aluminum loading ramps * Semi-trailer platform and low loader platform with 50 mm clamped timber floorboards * Checker plate above the axles * Prepared for 3 slots underneath the semi-trailer platform for storage of optional aluminum loading ramps * Swivel arm as support for connection lines from the truck to the trailer * Load securing package (LaSi): perforated outer frame on the semi-trailer platform with 45° edge and hole pattern for lashing equipment (2 t lashing capacity per point at minimum spacing of 480 mm), each side with 2 x 6.3 t recessed lashing rings in the floor, each side with 1 x 16.5 t lashing ring in the incline from the low loader platform to the semi-trailer platform, 2 pairs of 16.5 t lashing rings in the low loader platform (1 x on the longitudinal beams after the step, 1 x above the center axle beside the longitudinal beam), each side with 3 x 13.4 t lashing rings on the outer frame (1 x at start of the semi-trailer step, 1 x at start of loading ramp slope, 1 x at end of loading ramp slope), each side with 3 x 10 t lashing rings (2 x between front wheel recess and first axle, 1 x between second and third axle), each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel recesses (2 x at front, 1 x at rear wheel recess) * Extended excavator arm trough running from the end of the last fixed axle over the steering axle up to the rear crossmember, with internal reinforcement profile, approx. W = 770 mm x rear D = 270/front D = 170 mm, each side with 2 x 6.4 t lashing rings in the excavator arm trough * Each side with 2 wheel recesses, 390 mm deep and 640 mm wide, f

Condition: new, maximum load weight: 30,500 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Tire pressure monitoring with display capability in the truck via EBS signal – no installation required on the truck side * Drum brakes * 4 x 11 t Gigant axles Gedpfx Aexmpydsdtjkd * Air suspension with manual lowering at the rear * Warning panel packages front & rear * SmartBord infotool installed with pressure sensors to display total axle load per axle group * Reflective contour tape on the sides and rear * LED rotating beacon (removable) at the rear * 15-pin electrical connector * LED rear lights * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Closed single plastic mudguards at the front * Straight steel mudflap skirts at the rear, each with spray suppression (anti-spray) * Side underrun protection * Front superstructure in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments incl. lockable folding lids (lids open to the rear) * Chassis made from high-strength fine-grain steel * Deck over bogie platform from 50 mm and in low-bed platform from 60 mm softwood * Outer planks of the ramps made from 50 mm hardwood * Load securing package comprising: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform; on each side, front and rear, 1 pair of 13.4 t lashing rings on the outer frame; 1 pair of 10 t lashing rings per side, hinged and lowerable, loadable in all directions and recessed into the outer frame; bolted 5 t lashing rings to the outer frame of the wheel recesses (2 each at the front wheel recess, 1 each at the rear); 2 pairs of 6.4 t lashing rings at the sides in the excavator boom holder * 11 pairs of folding outriggers for 3 m total width (except for rear bevel) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for steel widening planks mounted crossways to the loading surface in front of the first rear axle * Excavator boom holder above the rear axle to the end of the approach slope approx. 2,300 x 740 x 190 mm * 2 wheel recesses per side, approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with retractable cover (storage for covers at the front on the bogie platform) for transporting wheel loaders with a wheelbase of 3,100 – 3,640 mm * Mechanical drop supports at the rear * Hydraulic folding ramps with hydraulic extendable ramp tip approx. 4,650 x 720 mm * Hydraulic side ramp shift * Loading area over turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded loading height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, bogie, folding outriggers, rear drop supports and drive-on ramps hot-dip galvanized * Axles, air tanks and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and subject to prior sale * Available from week 14/2026 * Sample images

Condition: new, maximum load weight: 30,500 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages at the front & rear * SmartBoard installed as info tool with pressure sensors for total axle load display per axle group * Reflective contour tape on sides and rear * LED rotating beacon (removable) at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Closed individual plastic mudguards at the front * Straight steel mudflaps with spray suppression at the rear * Side underrun protection * Front extension ahead of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments including lockable hinged lids (lids open towards the rear) * Chassis made of high-strength fine-grain steel * Floor over bogie platform made of 50 mm, and in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of 50 mm hardwood * Load securing package comprising: 2 lashing eyelets 6.4 t at the front left and right on the main frame of the bogie platform; 1 pair of 13.4 t lashing rings at both the front and rear on the outer frame; 1 pair per side 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame; bolted 5 t lashing rings on the outer frame of the wheel recesses (2 pieces at the front wheel recess, 1 at the rear); 2 pairs of 6.4 t lashing rings at the side in the excavator stick rest * 11 pairs of folding outriggers for 3 m total width (except on the rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the extension planks, made of sheet steel, mounted transversely in front of the first rear axle * Excavator stick rest above the rear axle to the end of the access ramp approx. 2,300 x 740 x 190 mm * 2 wheel recesses per side approx. 640 mm wide (front 340 mm deep, rear 220 mm deep) with slide-in covers (storage for covers at the front of the bogie platform) for transporting wheel loaders with wheelbases from 3,100 to 3,640 mm * Mechanical drop supports at the rear * Hydraulic folding ramps with hydraulically extendable ramp tip approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area above the slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded loading height approx. 890 mm +/- 20 mm (incl. 860 mm approach ramp) * Chassis, bogie, folding outriggers, rear drop supports and loading ramps are hot-dip galvanized * Axles, air reservoirs and drawbar painted in black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale Godpfxjxmpyko Adtokd * Available from week 14/2026 * Sample images

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with tandem equalizing unit * Tire pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * Drawbar adjustable in height by 300 mm with 40 mm flange towing eye * Mechanical landing gear at the front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * 15-pin electrical connector * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks on the side and rear in the central locking mounts, as well as 2 pieces on the front wall * Main frame made of high-tensile steel * Steel pallet - 2-way tipper superstructure: front wall fixed and made of smooth sheet, continuous side walls foldable without central stanchions, with drop-side lifting support and swinging via manual central locking * Rear stanchions bolted * Steel rear wall slid in front of the ramps * At each corner: 1 x 5 ton lashing point, and 4 x 3 ton lashing rings recessed into the outer frame on each side * 4 mm floor made of high-tensile steel * Two-piece mechanical grid ramp with aluminum tip: 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) * Chassis, drawbar, rear stanchions, underrun protection, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange eye, and landing gear painted black * Side panels and platform in RAL 9010 pure white * Painting of the side panels and tipping body in a RAL color of choice available at extra cost * New vehicle with manufacturer warranty * Subject to errors and prior sale Godstr Sucopfx Adtjkd * Available from CW 07/2026

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizer unit * Tire pressure monitoring with display option in the truck via EBS signal, no installation required on the truck side * Height-adjustable drawbar by 300 mm with 40 mm flange towing eye * Mechanical landing gear at the front * Rear: 2 mechanical fold-down supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * 15-pin power connector * Multi-chamber tail lights * Bolted underride guard * Plastic quarter mudguards * Lashing hooks on the sides and rear in the central locking mounts, plus 2 pieces on the front wall * Main frame made of fine-grained steel * Steel pallet two-way tipper body: front wall fixed, made of smooth sheet; continuous side walls, foldable without center stakes with drop side spring assist and oscillating via manual central locking * Rear stakes bolted * Steel rear wall inserted in front of the ramps * Each corner fitted with one 5 t lashing ring and four 3 t lashing eyes recessed in the outer frame on each side Gksdpstr St Uefx Adtsd * 4 mm floor made of fine-grained steel * Two-piece mechanical grid ramps with aluminum pointed section 2,150 + 1,300 mm x 600 mm (manually retractable down to 80 mm) * Chassis, drawbar, rear stakes, underride guard, mechanical supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and landing gear painted in black * Side boards and platform in RAL 9010 pure white * Side walls and tipping platform can be painted in a different RAL color for an extra charge * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 07/2026

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform: * RDÜ (Tire Pressure Monitoring) * EBS (Electronic Braking System) * Emergency Release Device for Spring Brake Cylinders * Drum Brakes * 2 x 7 t BPW Axles * Air Suspension with Lift and Lowering Facility * Mechanically Adjustable 3 m Warning Sign Packages Front and Rear * Drawbar Adjustable in Height by 300 mm with 40 mm Flange Tow Eye * Drawbar Shortened by approx. 200 mm to approx. 1,800 mm (therefore B-measure of approx. 8,080 mm) * Support Winch at Front * External Folding Supports at Rear * Plastic Toolboxes approx. 750 x 350 x 300 mm each on left & right side * Side Impact Protection * Underrun Protection Gkedpfsv D Tbdjx Adtod * Plastic Quarter Mudguards * 15-pin Power Connector * LED Lighting System 12 / 24 V * 2 Additional LED Reversing Lights at Rear (activated via reverse gear) * 1 Removable LED Beacon incl. Bracket at Rear * 400 mm High Bolted Front Wall * 50 mm Softwood Floor * 2 Pairs of Container Locks (extendable to 3 m container external width and lockable, lock dimension retracted as per ISO - DIN 15190 = 2,259 mm; container locks extended = 2,819 mm - this dimension is not to DIN - for an absolute outside width of 3,000 mm) * Perforated Outer Frame, angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm; installation of 3 t drop lashing rings every 600 mm possible; each side fitted with 5 x 3 t UVV-compliant lashing rings; at each corner, front and rear, 1 x 6.3 t lashing ring (front directly behind the container locks in the softwood floor, rear in the end cross member); various holes in front and rear cross members for 1.2 t lashing options * 1 Pair Aluminum Slide-in Ramps approx. 3,570 x 410 mm (10 t capacity / pair) suitable for rubber-tired and tracked vehicles * Rear storage compartment integrated into chassis below the loading area * --- Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized --- * Axles, air tank, front winch and flange tow eye painted in black * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 09/2026