Used Faymonville Stbz Semitrailers for sale (219)

Condition: new, maximum load weight: 48,180 kg, overall weight: 70,700 kg, axle configuration: > 3 axles, total width: 2,750 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment features. Full equipment list available on request. GOOSENECK * Gooseneck with integrated single-axle chassis (pendle axle) in removable design * Gooseneck hydraulically height-adjustable, including hydraulic connection linked to the hydraulic axle compensation for the front axles * Length: approx. 5,200 mm, with front taper approx. 60° * Suitable for tractors: 6 x 4 or 8 x 4 * Plug-in steel front wall, approx. 400 mm high, in angled design * 1 pair of mechanical support legs at the front of the gooseneck, foldable (LC 10,000 daN) * 1 pair of plug-in aluminium side boards, approx. 400 mm high, anodized finish * 1 plug-in aluminium rear board, approx. 400 mm high, anodized finish * Checker plate covering above the gooseneck * 3.5-inch kingpin * Round NATO socket on the front connection bar (Maeler & Kaege VG 96 917) * 1 INOX tool box with single lid, bolted to the right side of gooseneck in the direction of travel, by the ALU sideboard, approx. 1,350 x 400 x 400 mm (L x W x H) * Hydraulic connections from the gooseneck to the low-bed with multi-coupling * 1 LED work light each on the left and right on the rear cross member of the gooseneck, wired to the connection bar for the tractor unit LOAD DECK * Low-bed with external beams, designed as telescopic load deck in low-profile construction with front extension, including fixed approx. 50 mm hardwood floor, length x width approx. 8,000 mm x 2,740 mm * One locking point approx. every 1,000 mm on the extension * Fixed drive-on ramps at the front of the loading platform with climbing strips Guedpfewx Ddwex Af Rei * 1 lashing ring on the outside of the fixed drive-on ramp (LC 10,000 daN) * 1 lashing ring suspended on the outside on each left and right at the front cross member (LC 10,000 daN) * Lashing rings with retaining spring approx. every 1,200–1,300 mm on the inside beams of the low-bed * Lashing rings with retaining spring approx. every 1,200–1,300 mm on the outside beams of the low-bed (LC 10,000 daN) * Recesses above lashing rings in the upper flange of the outside beams * Mechanical pin-lug coupling from the low-bed to the chassis to change the load deck or install extension beams, with electro-pneumatic-hydraulic couplings * The outside beams of the low-bed with a painted-on sand layer for anti-slip protection * 4 pairs of recessed lashing rings lying in the load deck, distributed along the outer frame/outside beam (LC 10,000 daN) * 1 lashing ring outside each on the left and right on the rear cross member (LC 10,000 daN) * Fold-out deck wideners, approx. 230 mm per side * Loose widening planks, steel-edged * 6 pairs of threaded blocks between the lashing rings under the upper flange on the outside beam, for mounting bolted rings M24 (LC 8,000 daN) * 2 pairs of M24 bolted rings (LC 8,000 daN) included REAR CHASSIS * Rear chassis with closed outer frame, checker plate covering and continuous prism excavator trough, approx. 1,450 x 900 x 505 mm, open at the rear PENDLE AXLE * All axles hydro-mechanically forced steering * Burst hose valve on the axle compensation cylinders with automatic RESET function * Hydraulic cylinders with shut-off valves and pre-fittings to secure in raised position * Final painting of axles with 2 layers of 2-component paint, solid color in DB 7350 Novagrau * Hydraulic axle compensation * Tires 245/70 R 17.5 3PMSF * Suspension bar

Condition: used, axle configuration: 3 axles, first registration: 04/2019, loading space length: 8,070 mm, loading space width: 1,570 mm, loading space height: 3,540 mm, total length: 10,800 mm, total width: 2,550 mm, suspension: air, tire size: 385/55R22.5, color: white, Year of construction: 2015, = Additional options and accessories = - Door opening height: 359 - Door opening width: 195 - Rear door type: double_doors - Superstructure construction year: 2015 = More information = Axle configuration Tyre size: 385/55R22.5 Make axles: BPW Eco plus Brakes: drum brakes Suspension: air suspension Axle 1: Alloy wheels; Tyre profile left: 60%; Tyre profile right: 90% Axle 2: Alloy wheels; Tyre profile left: 70%; Tyre profile right: 90% Axle 3: Alloy wheels; Tyre profile left: 60%; Tyre profile right: 40% Weights Empty weight: 6.290 kg Gujdpfx Aoxqpuvef Rei Carrying capacity: 30.710 kg GVW: 37.000 kg = Dealer information = Would you like more information about this vehicle? We recommend that you take a look on BAS World. There you will find: • HD inspection video • 360-degree images • Complete and verified specifications • Calculation of delivery costs and time • BAS World support and services Want to know more? Visit BAS World online! España (ES) Hablamos 17 idiomas, para que siempre podamos ayudarte en tu propio idioma. No dudes en ponerte en contacto con nosotros directamente. ¡Nuestro empleado español estará encantado de ayudarte! Deutschland (DE) Wir sprechen 17 Sprachen, damit wir dir immer in deiner eigenen Sprache helfen können. Kontaktiere uns gerne direkt. Unser deutscher Mitarbeiter hilft dir gerne! France (FR) Nous parlons 17 langues, afin de pouvoir toujours vous aider dans votre propre langue. N'hésitez pas à nous contacter directement. Notre collaborateur français se fera un plaisir de vous aider ! Portugal (PT) Falamos 17 idiomas, para que possamos sempre ajudá-lo no seu próprio idioma. Não hesite em nos contactar diretamente. O nosso colaborador português terá todo o prazer em ajudá-lo! Italia (IT) Parliamo 17 lingue, per poterti sempre aiutare nella tua lingua. Non esitare a contattarci direttamente. Il nostro collaboratore italiano sarà felice di aiutarti!

Condition: used, color: red, Year of construction: 2021, Faymonville F-S42-1ACA. Year: 2021. 12-ton SAF axles. Maximum permissible weight: 49,000 kg. Kingpin load: 25,000 kg. Hydraulics operated via NATO connection from the truck. Hydraulically detachable gooseneck. Toolboxes and aluminium side boards on the neck. 2 x 25 cm widening, including side extensions. 2 x extendable: 1: 5,100 mm. 2: 5,500 mm. Total extension: 10.6 meters! Air suspension. Power steering. Radio remote control. 3 removable floor boards. Dimensions: Neck: Length: 4,100 mm Width: 2,500 mm Height: 1,550 mm Kingpin height: 1,250 mm Deck: Length: 6,850 mm Width: 2,550 mm Height: 430 mm Deck thickness: 280 mm Godpfx Afjxvdm Ds Roui Rear trailer section: Length: 2,800 mm Width: 2,550 mm Height: 1,000 mm Tyres: 235/75R17.5, 70% tread remaining. ID No.: 489 The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all contracts concluded by Heinhuis, and the preceding negotiations. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and confirm that you have taken note of these. All prices are net export prices. = Further Information = Year of construction: 2021 Gross vehicle weight (GVW): 49,000 kg Extendable body: Yes = Company Information = For more information: WhatsApp:

Condition: excellent (used), functionality: fully functional, empty load weight: 19,200 kg, maximum load weight: 73,000 kg, overall weight: 92,200 kg, axle configuration: > 3 axles, first registration: 08/2009, next inspection (TÜV): 01/2026, loading space length: 15,000 mm, loading space width: 2,700 mm, suspension: air, color: black, Year of construction: 2009, Equipment: ABS, FAYMONVILLE STZ-6WAU – 6 AXLES – 92.2T GVW – 73T PAYLOAD – HYDRAULIC RAMPS – EXCELLENT CONDITION! 🚛💪 Looking for a reliable and versatile low-loader trailer? ✅ We are specialists in the sale of heavy vehicles and transport equipment – offering only proven machines in excellent technical condition. Check out our offer and find the equipment that suits your logistics needs! 🔍📦 📌 In this listing we present: FAYMONVILLE STZ-6WAU MULTIMAX – Year: 2009 – 6-Axle Trailer – TECHNICAL CONDITION: EXCELLENT ✅ 🔧 Key Features & Technical Specifications: Model: FAYMONVILLE STZ-6WAU MULTIMAX Year of Manufacture: 2009 Number of Axles: 6 Gross Vehicle Weight (GVW): 92,200 kg Payload Capacity: 73,000 kg Total Length (closed): 15 m Loading Area Length (closed): 11 m Extendable by: 4 m Total Length (extended): 19 m Tires: 70% tread remaining Axles: 2 lifting, 4 steering Ramps: Hydraulic ♻️ Extras: Side toolboxes 🧰 ✅ Technical Condition: Mechanically: No issues – fully operational and ready to work immediately 🔧 Visually: Very good – well-maintained, post-service 🧼 Usage: Perfect for transporting heavy construction equipment, industrial machines, and oversized cargo 🏗️🚜 ⭐ Additional Advantages: Durable structure by the renowned manufacturer FAYMONVILLE Hydraulic ramps for easy loading/unloading ⬆️⬇️ Suitable for various terrain conditions 🌍 Improved maneuverability with steering and lifting axles 🔄 Gujdpfx Afsxw Hx Sj Rsi Practical storage compartments for extra gear 🧰 🌍 Transport & Financing: We arrange trailer transport across all of Europe Free start-up inspection included! 🔍 Support with financing – leasing, credit, Start-Up program Leasing decision in as little as 2 hours! ⏱️ Invoicing in EUR/PLN We are an authorized supplier for most leasing companies 🤝 🚀 Don't wait – choose quality and reliability! We invite you to contact us and schedule a viewing today! 👋

Condition: good (used), functionality: fully functional, empty load weight: 27,300 kg, maximum load weight: 60,300 kg, overall weight: 88,000 kg, axle configuration: > 3 axles, first registration: 04/2021, loading space length: 12,000 mm, loading space width: 2,850 mm, loading space height: 500 mm, total length: 22,380 mm, total width: 3,300 mm, suspension: hydraulics, tire size: 285/70R19.5, tire condition: 70 %, wheelbase: 1,360 mm, ground clearance: 200 mm, color: red, Year of construction: 2021, Equipment: ABS, Faymonville F-S44-2GXX-1C3B1 Faymonville D-2 Year: 2021 Gross weight: 88,000 kg King pin load capacity: 23,000 kg Rear axle bogie load capacity: 48,000 kg Goose neck length: 4,900 mm Turning radius on king pin: 3,200 mm Height of loaded fifth wheel: 1,370 mm Loading platform length: 7,500 mm Guodpfx Aexwagcef Rei Wheelbase: 4,500 mm Loading platform width: 2,840 mm Ground clearance (unstretched): 200 mm Height of fully loaded loading platform: 500 mm Axle bogie length: 5,480 mm Height of fully loaded rear axle bogie: 1,170 mm Hydraulic suspension travel: –200 / +400 mm Axle spacing: 1,360 mm Width: 2,480 / 2,850 mm Goose neck: Detachable goose neck, length 4,900 mm. Goose neck with 60° chamfered corners. Technical load capacity: 50,000 kg. Suitable for tractors: 6 x 4, 8 x 4, and 10 x 4 (8 x 4 with 1-axle dolly or 6 x 4 with 2-axle dolly). Loading deck: Recessed loading deck in “VERY LOW” version with side girders, length approx. 7,500 mm. Deck recessed and covered with approx. 50 mm hardwood planking, featuring a pneumatic locking device. Supply lines run inside the chassis frame and automatically adjust to the deck length. Rear undercarriage: Rear axle bogie with side frame covered with chequered plate. Rear axle bogie with channel 1,550/900 x 550 mm, rear open. PENDEL-AXLE – all remaining axles hydro-mechanically steered. Each suspension cylinder fitted with a locking pin to secure the axle in the raised position. Technical axle load capacity: 15,000 kg. Hydraulic suspension. Brake system: Brake system in full compliance with EU regulations, equipped with EBS-E, not connected to the tractor unit. The semi-trailer has been granted an exemption from standard vehicle technical requirements for both four-axle and six-axle configurations.

Condition: new, axle configuration: > 3 axles, total length: 9,300 mm, total width: 2,540 mm, suspension: air, tire size: 245/70 R17.5, wheelbase: 1,360 mm, color: blue, Year of construction: 2023, Equipment: tail-lift, Colour: Blue Payload: 54,465 kg Main Features: Manufacturer: Faymonville Model: MAX 110-Z-4AA-9.30-U Chassis Number: YAMT14XX4N0107629 Year of Manufacture: New and unused (2023) Weights / Payload: - King-pin load: 23,000 kg - Axle load: 12,000 kg - Total axle load: 48,000 kg - Gross vehicle weight (GVW): 71,000 kg - Unladen weight: 16,535 kg - Payload: 54,465 kg Axles: - Axle make: BPW - Hydraulic steering - Pneumatic suspension with lifting/lowering valve - WABCO brake system - Tyres: 245/70 R17.5 – Michelin (Load index: 146/146 F) - 1st axle liftable Dimensions: - Load length: 9,300 mm - Extensions: 6,500 + 6,800 mm - Load platform width: 2,540 mm - Load height: 900 mm Gsdpouu Hcfjfx Af Rjui Additional Information: - Double-extendable loading platform - Container locks - Width outriggers + wooden outriggers for extension - Lashing rings - Pair of double-folding loading ramps - Central lubrication - 1x spare wheel with holder - JOST landing gear - 24 Volt electrical system - 2.0'' king-pin - One galvanised steel front wall - Electrically driven hydraulic pump - Manual steering - Twist locks = Further Information = General Information Year of manufacture: 2023 Axle configuration Tyre size: 245/70 R17.5 Suspension: Air suspension Rear axle 1: Twin tyres; Lift axle; Max. axle load: 12,000 kg; Steered; Axle make: BPW; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 2: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 3: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Rear axle 4: Twin tyres; Max. axle load: 12,000 kg; Steered; Tyre tread left inner: 100%; Tyre tread left outer: 100%; Tyre tread right inner: 100%; Tyre tread right outer: 100% Weights Unladen weight: 16,535 kg Payload: 54,465 kg Gross vehicle weight: 71,000 kg Functionality Load platform height: 655.35 mm (Note: Please verify source, as figure seems inconsistent) Extendable body: Yes Condition General condition: Very good Technical condition: Very good Optical condition: Very good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for more information.

Condition: used, maximum load weight: 37,535 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and soon-available vehicles, on our website. The following is an excerpt from the equipment specification. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated locking mechanism * 7 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), fitted with lift/lower function. Technical axle load: 10,000 kg each (ET0) Gusdpfx Afsxgk U Nj Roi * Self-steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M), without connecting lines to tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame by a two-component (2K) zinc dust primer * High-quality single-color topcoat (2K) in RAL 3002 carmine red * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings on galvanised front connector bar * 4 wheel chocks with holders * 2" king pin * Yellow reflective tape compliant with EU-standard on sides, extension and trailer rear * European reflector boards (red-yellow) on rear of trailer * Loading platform with approx. 30 mm thick wooden floor encased in Omega profiles * 10 pairs of stake pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Storage for up to 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall * 1 spare wheel holder under the loading platform on the left in the driving direction, without spare wheel * One mudflap at the rear of the trailer * Manual and documentation on USB stick * Bracket for rotating beacon at the rear of the trailer * On gooseneck and rear panel, left and right, one holder each for warning signs, including socket * Speed stickers 80 km/h, rear and both sides * Load gauge for axle load determination including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets on loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * INOX toolbox, approx. 600 x 350 x 600 mm, under the platform on the left in the driving direction * 4 pairs of longitudinal stake pocket rails for 80 x 50 mm insertable stanchions mounted on the loading platform * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on rear panel * HRM metallisation (High Resistance Metallisation)

Condition: good (used), first registration: 06/2013, wheelbase: 2,900 mm, color: red, Year of construction: 2013, Unladen weight: 2,750 kg Payload: 25,250 kg Gsdoxuqg Uopfx Af Rjui Gross vehicle weight: 28,000 kg Technical condition: good Visual condition: good Please contact Robert Hulleman for further information.

Condition: good (used), machine/vehicle number: YAFPV3006N0031416, axle configuration: 3 axles, wheelbase: 9,000 mm, Year of construction: 2022, = Additional Options and Equipment = - Air suspension front - Air suspension rear - Disc brake system = Further Information = Weights Unladen weight: 9,560 kg Payload: 35,440 kg Gross vehicle weight: 45,000 kg Condition Gjdpfxjxuru Hs Af Rsui Technical condition: good Visual condition: good Additional Information Front tyre condition: 40 Front tyres: 385/65 R 22.5 Rear tyres: 385/65 R 22.5 Last inspection: 2025-10-30 Further Information Contact Lastas Sales for more information.

Condition: used, color: red, Year of construction: 2015, Faymonville F-S43-1A1Y. Year: 2015. 9 tons SAF axles. Weight: 10,190 kg. Max weight: 45,000 kg. Kingpin load: 18,000 kg. 5.75m Extendable. Powersteering 3x Forced steering Hydraulic from trailer works on NATO electricty. Airsuspension. 1st axle liftaxle. Dimmensions: Floor: L: 13750 mm. Gjdpfxexui D Se Af Rjui W: 2550 mm. H: 1400 mm. H: Allu boards: 600 mm. Tyres: 385/65R22.50 70%. ID NR: 661 The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export net prices. = Further information = Year of construction: 2015 Unladen weight: 10,190 kg Payload: 34,810 kg GVW: 45,000 kg Extendable body: Yes = Company information = For more information: WhatsApp:

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Gusdpfx Afeh Hm Ths Rji Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: used, maximum load weight: 33,980 kg, overall weight: 47,000 kg, axle configuration: 2 axles, first registration: 02/2022, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, total width: 2,540 mm, total height: 2,300 mm, Year of construction: 2022, Equipment: ABS, Low bed trailer with externally mounted beams in extendable SUPER LOW design, length approx. 6,850 mm * Overall length extendable from 13,500 mm to 19,000 mm * Loading area width extendable from 2,540 mm to 3,000 mm * Low bed with fixed hardwood floor (approx. 40 mm thick) and mechanical locking system * Supply lines are protected within the extendable beams and automatically adjust to the respective low bed length * 5 pairs of lashing rings foldable outwards (LC 10,000 daN) * 6 pairs of threaded blocks on the inside beam for mounting screwable RUD rings Rear chassis * Rear chassis with closed outer frame, checker plate covering, and continuous prismatic excavator trough, approx. 1,250/700 x 505 mm, open at the rear * 2 pairs of lashing rings foldable outwards (LC 10,000 daN) * 1 pair of horizontal lashing rings in the trough (LC 8,000 daN + 5,300 daN) * 2 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, on the outer frame Gooseneck * Gooseneck in SNT design for optimizing loading area length, length approx. 3,785 mm * Gooseneck hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 23,000 kg Suitable for tractor units: 4x2, 6x2 and 6x4 PENDLE AXLE * All axles hydro-mechanically forced steered * Hose rupture valve on axle compensation cylinder with automatic RESET function Gedpfx Afjwla Rts Rjui * Hydraulic cylinders with shut-off valves and pre-pins to secure in raised position * Technical axle load: 12,000 kg each * Hydraulic axle compensation * Axle tools * Tires 245/70 R 17.5 3PMSF load index (146/146F), new spare wheel Brake system * Brake system according to EU regulations with EBS-E (2S2M) with connecting lines to the tractor unit Electrical system * Remote control for axle steering * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front with sockets 24N, 24S & 15-pin connection according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction * Steel structure made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC Paintwork * First-class and durable corrosion protection * High-quality two-component (2K) single-color top coat * 2-inch king pin * Galvanized steel front wall, approx. 400 mm high * At the galvanized connection strip at the front: yellow-red air couplings * 4 wheel chocks with holders * Electro-hydraulic unit * Yellow reflective tape according to EU regulations on the side, the extension and the rear of the trailer * Bracket for a rotating beacon at the rear of the trailer, including beacon * European reflective plates (red-yellow) at the rear of the trailer * Mountings for warning signs including sockets on both gooseneck and rear left/right panel * Manual and documentation * 80 km/h speed sticker at the rear and on both sides * Load gauge to determine axle load including load diagram * Subject to errors, modifications and prior sale.

Condition: used, maximum load weight: 38,080 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specifications available upon request. Loading Platform: * Extending loading platform with pneumatically operated locking mechanism * Loading platform with approx. 30 mm thick wooden floor framed in omega profiles * 7 pairs of folding external lashing rings (LC 5,000 daN) * 3 pairs of folding external lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension * All axles hydro-mechanically forced-steered * Equipped with disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lift and lower valve * Axle tools Tyres: * Tyres: 385/65 R 22.5 Braking System: * Braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor Warning Signs: * Mountings on the gooseneck and rear panel left and right for warning signs, including socket Electrical System: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin, connection according to ISO 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel structure made of high-strength fine-grained steels * Steel grades S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * First-class, durable corrosion protection for the standard grit-blasted welded frame, guaranteed by a two-component zinc dust primer Gusdpsxf Sifjfx Af Rsi * High-quality, single-colour two-component topcoat in RAL 3002 carmine red * Rims in silver, add-on parts as per manufacturer's choice * Rear section metallized and painted in RAL 9010 pure white Included Accessories: * 2-inch kingpin * 4 wheel chocks with brackets on the front wall * Remote steering, front and rear, cable-operated by push buttons, with single-track control of the axles (without installation in the tractor) * Manual and description on USB stick * Electro-hydraulic unit * Galvanized connection strip at front, yellow-red air couplings * Yellow reflective tape according to EU regulations on the sides, extension and rear of the trailer * European reflective panels (red-yellow) on the rear of the trailer * One mud flap at the rear of the trailer * Mounting for rotating beacon at the rear of the trailer * 10 pairs of pocket sockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform * 1 spare wheel holder under the platform on the right-hand side * Speed stickers 80 km/h on the rear and on both sides * Load manometer for determining axle loads including load chart * Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the platform for: 1 x 20' container, 2 x 20' container or 1 x 40' container; an additional locking point is provided in the extension for a 45' container * 4 pairs of transverse stanchion strip pockets for plug-in stanchions approx. 100 x 50 mm * Storage for plug-in stanchions on the inside of the front wall * Access ladder installed on both left and right side in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted under the loading platform at the front left in the direction of travel * One add

Condition: used, machine/vehicle number: ***YAMT13XX6K0104043, axle configuration: 3 axles, first registration: 01/2019, total length: 13,800 mm, total width: 2,550 mm, total height: 3,410 mm, suspension: air, tire size: 235/75 R17.5, color: other, Year of construction: 2019, Equipment: ABS, Chassis Chassis height: 87 cm Diameter coupling pin / coupling plate: 2 inch Height of coupling pin / drawbar: 120 cm Special Transport 2-piece driving plates: ✓ Hydraulic ramps: ✓ Length of loading floor: 930 cm Length of ramps: 395 cm Length of swan neck: 415 cm Lowbed trailer: ✓ Max width: 300 cm (25 cm per side) Max. length: 1380 cm Expandable: ✓ Tank Fuel: ✓ Godpfxeu H D R Ee Af Rsui NON-EU VEHICLE, REQUIRES CUSTOMS CLEARANCE // 3-axle semi-lowbed trailer with hydraulic ramps, Max design weights 49500 kg, ABS, Air suspension, Drum brakes, SAF axles, Tyres 235/75R17.5, 3rd axle steering axle. // Dimensions // Load bed lenght 930 cm, Load bed width 250 cm, Load bed height 87 cm, Gooseneck lenght 415 cm, Gooseneck floor height 148 cm, Kingpin height 120 cm, Kingpin diameter 2 inches, Ramp lenght 395 cm, Ramp width 80 cm // Shipment dimensions 1380x255x341 cm = More information = Axle configuration Tyre size: 235/75 R17.5 Make axles: Saf Brakes: drum brakes Suspension: air suspension Axle 1: Double wheels; Tyre profile left outer: 60%; Tyre profile right outer: 60% Axle 2: Double wheels; Tyre profile left outer: 20%; Tyre profile right outer: 30% Axle 3: Double wheels; Steering; Tyre profile left outer: 55%; Tyre profile right outer: 50% Weights Empty weight: 10.040 kg Carrying capacity: 30.960 kg GVW: 41.000 kg Functional Make of bodywork: Faymonville Height of cargo floor: 87 cm Identification Registration number: C505325 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: good (used), axle configuration: 2 axles, first registration: 12/2002, loading space length: 156,800 mm, loading space width: 2,540 mm, loading space height: 250 mm, total length: 156,800 mm, total width: 2,540 mm, total height: 250 mm, suspension: air, Year of construction: 2002, Equipment: ABS, tail-lift, = Additional options and equipment = - Air suspension = Further information = Axle configuration Gsdpfouyud Nox Af Rsui Suspension: Air suspension Rear axle 1: Twin tyres; Steered Rear axle 2: Twin tyres; Steered Weights Unladen weight: 11,040 kg Payload: 22,000 kg Gross vehicle weight: 33,040 kg Condition Technical condition: Good Optical condition: Good Financial information Price: On request Further information Please contact David F Middelman or David F Middelman for more information.

Condition: used, color: yellow, Year of construction: 2017, Faymonville F-S43-1BGA. Year: 2017. 8-12 ton SAF axles. Weight: 10,050 kg. Max weight: 42,000 - 54,000 kg. Kingpin load: 18,000 kg. EBS ABS ALB. Twistlocks. Zinc-coated. 2 x 25 cm widened. 7.7 meter extendable deck. Gsdpext Hkyofx Af Rjui Air suspension. 3rd axle steering axle (trailing axle). Load floor dimensions: L: 13,100 mm W: 2,550 mm H: 1,100 mm Kingpin height: 1,000 mm. Tyres: 245/70R17.5, 60-80% tread. Mega / Lowdeck! ID No.: 433. The General Terms and Conditions of Heinhuis apply to all advertisements, offers and quotations by Heinhuis, to all agreements concluded by Heinhuis, and to the negotiations leading up to such agreements. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and confirm that you have taken note of these Terms and Conditions. Our prices are export net prices. = More information = Year of manufacture: 2017 Unladen weight: 10,050 kg Payload: 43,950 kg gross vehicle weight: 54,000 kg Extendable chassis: Yes Price: On request = Company information = For more information: WhatsApp:

Condition: excellent (used), axle configuration: > 3 axles, first registration: 03/2003, loading space length: 12,500 mm, loading space width: 2,550 mm, loading space height: 1,620 mm, total length: 12,500 mm, total width: 2,550 mm, total height: 1,620 mm, suspension: hydraulics, tire size: 275 / 70 R22.5, color: beige, Year of construction: 2003, Axle Configuration Tire size: 275 / 70 R22.5 Axle brand: SAF Suspension: Hydraulic suspension Rear Axle 1: Twin tires; Lift axle; Max. axle load: 10,000 kg; Steered Rear Axle 2: Twin tires; Max. axle load: 10,000 kg Rear Axle 3: Twin tires; Max. axle load: 10,000 kg; Steered Rear Axle 4: Twin tires; Max. axle load: 10,000 kg; Steered Rear Axle 5: Twin tires; Max. axle load: 10,000 kg; Steered Weights Unladen weight: 13,100 kg Payload: 61,900 kg Gross vehicle weight: 75,000 kg Gusdpfx Asuu E S Sef Rei Functional Loading platform height: 162 cm Condition Technical condition: Very good Visual condition: Very good Financial Information Price: On request Further Information Please contact Stefan Schaapveld for more information.

Condition: used, axle configuration: > 3 axles, first registration: 09/2008, loading space length: 13,500 mm, loading space width: 2,500 mm, color: yellow, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - EBS Guedoxt Tmhepfx Af Rei

Condition: new, maximum load weight: 73,090 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. The following is an excerpt from the equipment list; the full specification is available upon request. Gooseneck: * Gooseneck hydraulically liftable/lowerable and detachable * Length approx. 3,650 mm. For tractor units: 6 x 4 or 8 x 4 2-Axle Compact Front Bogie: * Hook mounts front and rear. Length: approx. 2,200 mm * Chassis width: approx. 2,850 mm Lowbed: * ATX-A lowbed with telescopic longitudinal beams in low-profile design, with fixed hardwood flooring, approx. 50 mm thick * With drive-over bridge hooks at the front and bolt-on/lug coupling at the rear * Base width: approx. 2,850 mm * Length: approx. 7,150 mm * Beam height: approx. 300 mm * Beam width: approx. 650 mm * Loading height approx. 450 mm, ground clearance approx. 150 mm 4-Axle Rear Bogie: * Mechanical pin/lug coupling for attaching a lowbed at the front * Rear closing cross-member * Chassis width: approx. 2,850 mm * Chassis length: approx. 5,480 mm 2-Axle Front Bogie: * Pendulum axles, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Axles finished with 2 coats of 2-component paint in MB7350 Novagrau Gedpfx Aexbv Aujf Roui * Technical axle load: approx. 14,640 kg (62 km/h) * Hydraulic axle compensation 4-Axle Rear Bogie: * Pendulum axles, all axles hydro-mechanically forced-steered * Hose rupture valve on the axle compensation cylinder with automatic reset function * Hydraulic cylinders with shut-off valves and locking pins for securing in raised position * Axles finished with 2 coats of 2-component paint in MB7350 Novagrau * Technical axle load: 14,640 kg (62 km/h) * Hydraulic axle compensation Tyres: * Tyres according to manufacturer’s choice (M+S) 285/70 R19.5 * Load index 150/148J Paintwork: * Entire steel structure is automatically blast-cleaned after welding using a turbine blasting system * Second round of blasting with corundum for optimal coating adhesion * HRM-metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminium) * Final coat with 2 layers of 2-component topcoat, single colour in RAL 3002 Carmine Red, corresponding to RAL system 841GL Including the following accessories: * Steel front wall, approx. 400 mm high * Plug-in aluminium side and rear walls for the gooseneck, approx. 400 mm high * 3.5-inch king pin * Truck hydraulic connection with flow regulator (20 l/min), incl. gallows for supply line suspension * The tank of the tractor unit must have a minimum capacity of 80 l * With MAX Trailer couplings; otherwise, couplings to be supplied by the customer ex works * BEKA-MAX central lubrication for one gooseneck with standard grease NLGI-2 * Multi-coupling hydraulic connectors on the gooseneck * Front bogie with separate air connection for pneumatic tools * BEKA-MAX central lubrication for a 2-axle bogie with standard grease NLGI-2 * Prepared for receiving bolt-on container positioning for 1 x 20' or 1 x 30' containers on outer beams * Without container locks * Mounts on the outer beams of the loading area for installing folding marker extensions * BEKA-MAX central lubrication for a 4-axle bogie with standard grease NLGI-2 * Rear bogie equipped with a socket for remote cable steering * Rear bogie with trough * One LED beacon with mounts on the left and ri

Condition: used, machine/vehicle number: YAMT14XX5K0104637, axle configuration: > 3 axles, first registration: 01/2020, total length: 14,100 mm, total width: 2,550 mm, total height: 3,350 mm, suspension: air, tire size: 235/75 R17.5, color: other, Year of construction: 2020, Equipment: ABS, Chassis Chassis height: 90 cm Diameter coupling pin / coupling plate: 2 inch Structure Dish height: 120 cm Special Transport 2-piece driving plates: ✓ Hydraulic ramps: ✓ Length above axes: 90 cm Length of loading floor: 930 cm Length of ramps: 405 cm Length of swan neck: 430 cm Max width: 305 cm (20 cm + 20 cm) Max. length: 930 cm Expandable: ✓ Tank Fuel: ✓ 3-axle semi lowbed trailer with hydraulic ramps, ABS, Air suspension, 1st axle lifting axle, 3rd and 4th axles passive steering axles, Drum brakes, Saf axles, Tyres 235/75R17.5, Double tyres, Kingpin diameter 2 inch // DIMENSIONS // 60800 kg max weight, Load bed lenght 930 cm, Load bed width 255 cm, Max load bed width 305 cm, Load bed height 90 cm, Gooseneck lenght 430 cm, Gooseneck height 160 cm, Kingping height 120 cm, Ramp lenght 405 cm, Shipment dimensions: 1410x255x335 cm = More information = Axle configuration Tyre size: 235/75 R17.5 Make axles: Saf Brakes: drum brakes Suspension: air suspension Axle 1: Double wheels; Lift axle; Tyre profile left outer: 15%; Tyre profile right outer: 80% Axle 2: Double wheels; Tyre profile left outer: 60%; Tyre profile right outer: 50% Axle 3: Double wheels; Steering; Tyre profile left outer: 70%; Tyre profile right outer: 70% Axle 4: Double wheels; Steering; Tyre profile left outer: 75%; Tyre profile right outer: 65% Godpou H D Tajfx Af Roui Weights Empty weight: 11.480 kg Carrying capacity: 49.320 kg GVW: 60.800 kg Functional Make of bodywork: Faymonville Height of cargo floor: 90 cm Identification Registration number: C525073 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: excellent (used), functionality: fully functional, empty load weight: 19,200 kg, maximum load weight: 73,000 kg, overall weight: 92,200 kg, axle configuration: > 3 axles, first registration: 08/2009, next inspection (TÜV): 01/2026, loading space length: 15,000 mm, loading space width: 2,700 mm, suspension: air, color: black, Year of construction: 2009, Equipment: ABS, FAYMONVILLE STZ-6WAU – 6 AXLES – 92.2T GVW – 73T PAYLOAD – HYDRAULIC RAMPS – EXCELLENT CONDITION! 🚛💪 Looking for a reliable and versatile low-loader trailer? ✅ We are specialists in the sale of heavy vehicles and transport equipment – offering only proven machines in excellent technical condition. Check out our offer and find the equipment that suits your logistics needs! 🔍📦 📌 In this listing we present: FAYMONVILLE STZ-6WAU MULTIMAX – Year: 2009 – 6-Axle Trailer – TECHNICAL CONDITION: EXCELLENT ✅ 🔧 Key Features & Technical Specifications: Model: FAYMONVILLE STZ-6WAU MULTIMAX Year of Manufacture: 2009 Number of Axles: 6 Gross Vehicle Weight (GVW): 92,200 kg Payload Capacity: 73,000 kg Total Length (closed): 15 m Loading Area Length (closed): 11 m Extendable by: 4 m Total Length (extended): 19 m Tires: 70% tread remaining Axles: 2 lifting, 4 steering Ramps: Hydraulic ♻️ Extras: Side toolboxes 🧰 ✅ Technical Condition: Mechanically: No issues – fully operational and ready to work immediately 🔧 Visually: Very good – well-maintained, post-service 🧼 Usage: Perfect for transporting heavy construction equipment, industrial machines, and oversized cargo 🏗️🚜 ⭐ Additional Advantages: Durable structure by the renowned manufacturer FAYMONVILLE Hydraulic ramps for easy loading/unloading ⬆️⬇️ Godjxvmh Rspfx Af Reui Suitable for various terrain conditions 🌍 Improved maneuverability with steering and lifting axles 🔄 Practical storage compartments for extra gear 🧰 🌍 Transport & Financing: We arrange trailer transport across all of Europe Free start-up inspection included! 🔍 Support with financing – leasing, credit, Start-Up program Leasing decision in as little as 2 hours! ⏱️ Invoicing in EUR/PLN We are an authorized supplier for most leasing companies 🤝 🚀 Don't wait – choose quality and reliability! We invite you to contact us and schedule a viewing today! 👋

Condition: used, Year of construction: 2017, Faymonville F-S43-1BGS. Year of manufacture: 2017 9-ton SAF axles Unladen weight: 9,660 kg Payload: 35,340 kg Gross weight: 45,000 kg Kingpin load: 18,000 kg Extendable up to 7.2 meters Power steering with 3 steering axles EBS, ABS, ALB Hydraulics for the trailer operate on NATO standard Air suspension Stainless steel toolboxes Floor dimensions: Guodpfsxt Hivsx Af Roi Length: 13,600 mm Width: 2,550 mm Height: 1,500 mm Kingpin height: 1,300 mm Tyres: 385/65R22.5, 70% tread remaining Radio remote control! ID No.: 485 The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations made by Heinhuis, to all agreements concluded by Heinhuis, and to preliminary negotiations. By replying in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these General Terms and Conditions. Our prices are net export prices. = Further information = Year of manufacture: 2017 Unladen weight: 9,660 kg Payload: 35,340 kg Gross vehicle weight (GVW): 45,000 kg Extendable body: Yes = Company information = For more information: WhatsApp:

Condition: used, axle configuration: > 3 axles, first registration: 09/2008, loading space length: 13,500 mm, loading space width: 2,500 mm, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = Guodpfext Sb Rsx Af Rsi - EBS

Condition: used, maximum load weight: 57,900 kg, overall weight: 73,000 kg, axle configuration: > 3 axles, first registration: 06/2024, next inspection (TÜV): 07/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpts from the equipment list. Complete specifications available upon request. Gooseneck: * Gooseneck in SNT design for optimized loading platform length, approx. 3,700 mm in length * Rear of the gooseneck with bevel of approx. 1,000 mm x 10° * Technical fifth wheel load: 30,000 kg Suitable for tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading platform: * Telescopic loading platform, approx. 8,800 mm in length, with rear ramp approx. 500 mm x 10° Axles and suspension: Guedpfx Aoxuyprof Rei * BPW axles and suspension * 1st axle steered, equipped with electromagnetic reverse lock; all other axles hydro-mechanically forcibly steered * Technical axle load: 12,000 kg each * Air suspension with lifting and lowering valve Tyres: * 235/75 R 17.5 3PMSF twin tyres, load index 143/141J (144/144F) Brake system: * WABCO EBS-E braking system, compliant with EU regulations Paintwork: * Trailer colour: RAL 3002 Carmine Red Accessories included: * Removable steel front wall, approx. 400 mm high * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches; without installation of power connections on the tractor unit * Stowage position on the gooseneck for warning signs when not in use * 1 mounting adapter for spare wheel in front of the gooseneck front wall (without spare wheel) * Outer carrier on the gooseneck with fixing holes for bolt-on lashing rings. First hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of horizontal lashing rings in the rear area of the gooseneck (LC 10,000 daN) * On the gooseneck, 1 pair of removable ALU sidewalls, approx. 400 mm high, anodised * On the gooseneck, 1 removable ALU rear wall, approx. 400 mm high, anodised * Approx. 40 mm thick hardwood flooring over the gooseneck, checker plate over the kingpin * 2" kingpin * Mechanical landing gear with 2-speed gearbox and crank, JOST Modul B * On the loading platform: continuous and axially interrupted approx. 50 mm thick hardwood flooring * Platform locking with conically welded locking profiles approx. every 500 mm * Slotted holes for hook-in and repositionable bridging elements: at front of loading platform * 1 sliding intermediate table, approx. 300 mm wide, for the high cross-section telescopic tube with checker plate surface; front and rear with slotted holes for hook-in and repositionable bridging elements * 1 pair of lashing rings on the front crossmember (LC 10,000 daN) * 7 pairs of recessed lashing rings in the outer frame of the loading platform, foldable outwards (LC 10,000 daN) * Extendable galvanised platform widenings by approx. 230 mm per side (without wooden planks) * 1 pair of mechanical rear supports * Rear steering from front and rear operable via cable remote control with buttons, with single-track axle alignment, without installation in tractor unit * Cable (approx. 35 mm², approx. 3.5 m long) with connectors (NATO-NATO) between trailer and tractor unit for supplying the electro-hydraulic unit and/or electric winch * 2 additional pairs of bolt-on lashing rings (LC 5,000 daN) * 1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm (L x W x H), straight design, with 2 external side doors and 1 top lid, located behind the front wall

Condition: used, machine/vehicle number: YAFTL408100008968, axle configuration: > 3 axles, first registration: 01/2008, total length: 13,400 mm, total width: 2,750 mm, total height: 3,400 mm, suspension: air, tire size: 245/70 R17.5, color: other, Year of construction: 2008, Equipment: ABS, = Additional options and accessories = - Drum brakes - Steering Axle = Remarks = Chassis Diameter coupling pin / coupling plate: 2 inch Height of coupling pin / drawbar: 120 cm Drum brake: ✓ Structure Construction year: 2008 Faymonville extendable 4-axle semi-lowbed trailer type STN 4AU, Gross weight 65000 kg, Load bed lenght 910 cm, Max load bed lenght when extended..... cm, Max load bed width 3 cm (275 cm), Load bed height 90 cm, Hydraulic ramps, Ramp width 85 cm, Air suspension, 2 passive steering axles, Gigant axles, Drum brakes, ABS, Tire size 245/70R17.5, Double tires, Shipment dimensions 1340x275x340 cm = More information = Axle configuration Make axles: Gigant Brakes: drum brakes Suspension: air suspension Front axle: Tyre size: 245/70 R17.5; Tyre profile left: 60%; Tyre profile right: 35% Middle axle: Tyre size: 245/70 R22.5; Tyre profile left: %; Tyre profile right: 50% Rear axle 1: Tyre size: 245/70 R17.5; Steering; Tyre profile left: 45%; Tyre profile right: 20% Rear axle 2: Tyre size: 245/70 R17.5; Steering; Tyre profile left: 50%; Tyre profile right: 60% Weights Guedpfxjxhgirj Af Roi Empty weight: 17.500 kg Carrying capacity: 47.500 kg GVW: 65.000 kg Functional Make of bodywork: Faymonville = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.