Trailer with working platform

Metal-Fach Ballenwagen T009 3-Achser

Condition: used, Year of construction: 1987, operating hours: 6,131 h, power: 37 kW (50.31 HP), next inspection (TÜV): 05/2027, Equipment: all wheel drive, cabin, front linkage, John Deere 1040 * Tractor * Tractor * Vintage * Tractor * Stoll Front Loader * First registered: April 21, 1987 * MOT: May 2027 * Operating hours: 6,131 h * Total weight: 4,000 kg * Unladen weight: 3,070 kg * Overall dimensions: 3,640 mm x 2,315 mm x 2,520 mm * Vertical, water-cooled, four-stroke, three-cylinder, in-line, naturally aspirated engine * 37 kW / 50 HP * 2,919 cc * Trailer hitch * All-wheel drive * Power steering * Manual transmission * Adjustable rims * Rear hydraulic control unit * Single-lever control unit * Rear PTO 540 / 1000 * Rear linkage Hjdpfx Adjwk T Nmjhou * Drawbar * Cab * Diesel * 30 km/h ATTENTION!!!!! ESSENTIALLY READ !!!!! We expressly reserve the right to sell this item prior to purchase, as we also offer this item on other portals. We strongly recommend viewing and inspection to ensure that the buyer is not under any misconception regarding its condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly welcome! The specified interior dimensions are approximate. TRADE-INS AVAILABLE FOR ALMOST EVERYTHING! EXCHANGES AND PAYMENTS AVAILABLE! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday 9:00 a.m. to 5:00 p.m., Saturday 9:00 a.m. to 2:00 p.m. Over 500 new and used trailers always in stock! Pegasus Trailer Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 07/2017, total length: 7,980 mm, total width: 2,550 mm, total height: 1,000 mm, suspension: air, color: red, Year of construction: 2017, - Central lubrication system Axle configuration Suspension: Air suspension Front axle: Twin tires; Max. axle load: 10,000 kg; Steerable Rear axle: Twin tires; Max. axle load: 10,000 kg Weights Unladen weight: 4,360 kg Payload: 13,640 kg GVW: 18,000 kg Hjdpfx Ajzh Upyodhou Functional Body brand: LANGEFELD LPA 18 TL 6300 Loading platform height: 100 cm Condition Technical condition: very good Optical condition: very good # OFFER ## Langefeld LPA 18 TL 6300 – 18-ton tandem trailer – Extendable loading platform – Air-suspended ### General data Manufacturer: Langefeld Type: LPA 18 TL 6300 Year of manufacture: 19.07.2017 Axle configuration: 2-axle tandem trailer Permissible total weight: 18,000 kg Axles: SAF 10-ton axles Suspension: Fully air-suspended Braking system: WABCO EBS with FleetBoard system This high-quality Langefeld LPA 18 TL 6300 is a professional machine and construction equipment transport trailer, characterized by its robust construction, excellent driving characteristics and high reliability. Thanks to the extendable loading platform, the extensive load securing system and the air-suspended SAF axles, this trailer is ideally suited for daily professional use. The trailer is in very good, fully original and excellently maintained condition. ## Dimensions Loading platform length: 630 cm Extendable rear: 155 cm Maximum loading platform length: 785 cm Loading platform width: 254 cm Overall width: 255 cm Loading platform height: 100 cm Overall length (retracted): 798 cm The extendable loading platform allows even particularly long machines, containers and components to be easily transported. ## Equipment The trailer is equipped with: * Fully air-suspended chassis * SAF 10-ton axles * WABCO FleetBoard system * Central lubrication system * Extendable loading platform * Twistlocks for container transport * Stake pockets * Stake boxes * Several heavy-duty lashing and tie-down points * Adjustable widening elements * Storage space for ramps * 4 stainless steel toolboxes * Robust, galvanized chassis for professional continuous use ## Technical advantages The air suspension in combination with the high-quality SAF axles ensures excellent driving comfort, optimal road handling and low maintenance costs. Thanks to the numerous lashing options and twistlocks, this trailer is suitable for the transport of both machines and containers. The central lubrication system significantly reduces maintenance effort and extends the life of all moving components. ## Ideally suited for the transport of * Construction machinery * Excavators * Wheel loaders * Telescopic handlers * Forklifts * Work platforms * Agricultural machinery * Containers * Steel structures * Long materials * Heavy machinery and vehicles of all kinds ## Tires * Tire tread approx. 70% * Ready for immediate use ## Condition This Langefeld LPA 18 TL 6300 is in very good technical and optical condition.

Condition: new, maximum load weight: 36,020 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 435/50 R 19.5, color: grey, Equipment: ABS, Loading platform: Loading area in extendable design with pneumatically confirmed locking mechanism 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of lashing rings can be folded outwards (LC 5,000 daN) 2 pairs of lashing rings can be folded outwards (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps Brake system: Brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in one color Rear section metallized and painted in RAL 9010 (pure white) Metallic paint is not possible Seat posts: JOST seat posts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDICK (ASS3) ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets Connection according to ISO Hodpfxji Dwlws Adhju 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Axles and tires: BPW axles, air-sprung, with disc brakes (377 mm), with lifting/lowering function The self-steering axles with electromagnetic reverse lock can be activated via reverse gear or manually Axle tool. Tires 435/50 R 19.5 Accessories included: Yellow-red air couplings on the galvanized connection strip at the front 2 wheel chocks with bracket 2" kingpin One galvanized steel bulkhead approx. 1,600 mm high. EN12642-XL. Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer European reflector plates (red/yellow) at the rear of the trailer Loading area with approx. 38 mm thick hardwood floor 10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed 1 spare wheel holder under the cargo bed on the right in the direction of travel Manual and description on USB stick One mud flap at the rear of the trailer A bracket for a rotating beacon at the rear of the trailer A holder for the warning signs on the gooseneck and on the rear panel on the left and right, including a socket One INOX toolbox transversely under the loading area (1,000 x 400 x 2,500 mm) 6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2 x 20ft containers or 1 x 40ft container, an additional locking point is provided in the pull-out for a 45ft container 3 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions Rear speed sticker 60 km/h. 2 reversing lights mounted on the rear panel Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm with a position light A bracket for rotating beacon on the warning signs HRM metallization (High Resistance Metallization) of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces are hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: used, Year of construction: 2008, Support axle cat. 3 Support wheel and transport wheel 26x12 Model EG 100/300/77RH / Hydraulic cutting width adjustment Strip body no. 30 Maize inserter / Straw insertion plates Disc coulter Overload protection with additional spring leaves / Hjdpfxjtia Dbj Adhju

Condition: new, empty load weight: 11,300 kg, maximum load weight: 36,700 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,250 mm, suspension: air, tire size: 385/65 r 22,5, color: grey-black, Equipment: ABS, Loading platform: Loading platform with extendable design and pneumatically actuated locking mechanism. A fixed intermediate table, approximately 250 mm wide, is located on the center beam. 8 pairs of lashing rings, foldable outwards (LC 5,000 daN) 3 pairs of lashing rings, foldable outwards (LC 10,000 daN) Recesses in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Axles and tires: BPW axles and suspension, all axles hydro-mechanically steered. Disc brakes, technical axle load: 10,000 kg Air suspension with lifting and lowering valve Axle tool 6-fold tire configuration 385/65 R 22.5 Braking system: Braking system according to EU regulations with EBS-E (2S2M) Kingpin: JOST kingpins (mechanical) with 2-speed gearbox for 24-ton lifting capacity (50-ton test load) Steel structure: Steel structure made of high-strength fine-grain steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system according to EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the connection bar at the front with 24N, 24S & 15-pole sockets Connection according to ISO: 24N ISO-1185 24S ISO-3731 15-pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer. High-quality 2-component (2K) topcoat, solid color in Novagrau. Rear section metallized and painted in RAL 9010 (pure white). Metallic paint not possible. Included accessories: One bracket for warning signs including socket on the swan neck and on the rear panel on the left and right sides. Trailing axle control from the front and rear by means of a cable remote control via push buttons, with single-axle control. Electro-hydraulic unit 4 pieces of chocks with holder on the front panel 2" kingpin A galvanized steel front panel approximately 2,200 mm high Yellow-red air couplings on the galvanized connection bar at the front White reflector tape according to EU regulations on the side, on the extension, and at the rear, in red. European reflector plates (red-yellow) at the rear of the trailer One mudflap at the rear of the trailer Manual and description One bracket for a rotating beacon at the rear of the trailer Loading platform with approximately 30 mm thick wooden floor framed in omega profiles 10 pairs of pocket rails for plug-in rails 100 x 50 mm in the outer frame of the loading platform 1 spare wheel holder under the loading platform on the right side in the direction of travel 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container, an additional locking point is provided on the extension for a 45ft container. 5 pairs of pocket rail strips, mounted transversely in the loading platform, for plug-in rails 100 x 50 mm Hjdjhlz Shopfx Adhsu One galvanized bracket transversely under the loading platform (2,390 x 720 x 400 mm) Access ladder mounted on the right side in the direction of travel One tool box HDPE 1,200x500x480 at the front under the loading platform on the left side in the direction of travel Lift axle on the front axle with control via TEBS E depending on the current axle load and the current load condition Central lubrication system with 2 pumps BEKAMAX (Pico) with normal grease NLGI-2 and with a removable protective cover around the pump Reflector tape red/white in the extension of the loading platform A painte

Condition: used, Year of construction: 2002, operating hours: 4,600 h, Equipment: all wheel drive, cabin, hydraulics, pallet forks, trailer coupling, Wheel loader O&K Type: L 5.5 Year: 2002 (first owner) Approx. 4600 operating hours Hydraulic quick coupler Additional hydraulics Tyres approx. 75% Wide tyres Sale only to commercial traders or for export; subject to prior sale and errors. Hedpfx Adsyypibjhou

Condition: used, empty load weight: 3,500 kg, maximum load weight: 14,500 kg, overall weight: 18,000 kg, first registration: 04/2009, next inspection (TÜV): 12/2025, loading space length: 7,600 mm, loading space width: 2,480 mm, loading space height: 2,850 mm, loading space volume: 53 m³, suspension: air, tire size: 245/70R17,5 144/144J, color: green, gearing type: other, front tire size: 245/70R17,5 144/144J, rear tire size: 245/70R17,5 144/144J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Registration service, general inspection (HU/SP/UVV), transfer to the port Languages: German, Russian, English, Arabic     Also available as a complete truck/truck combination! Base color: green Extras included ABS, turntable, air brakes, EBS, air suspension, price upon request (mobile), disc brakes, suspension: air-air, payload (kg): 14,500 Body type: top condition, inside side wall. General inspection (HU/SP) valid, HSN/TSN: 7951/000   Hodpfx Aoww D Itsdhou Errors excepted.

Condition: used, Year of construction: 2024, Wedge flange gate valve 6'' VL with back Wedge flange gate valve 6'' VR with / back Blind cover galvanized, for quick coupler 6' Bracket for suction nozzle / VR 1 swivel joint Docking device NW200 rear top for TAV tank size / 25.250l Bereifu Hjdpfx Ajtt A Umjdhou

Condition: used, axle configuration: 3 axles, first registration: 03/2000, loading space length: 8,000 mm, loading space width: 2,400 mm, loading space height: 2,600 mm, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2000, Equipment: ABS, = Additional options and accessories = - EBS - Rear doors = More information = Empty weight: 5.650 kg Carrying capacity: 18.350 kg GVW: 24.000 kg Selling price: € 6.700, US$ 7.728 Hedpfext R Sujx Adhou Tyre tread remainder on axle rear: 60% Make of axle rear: BPW Suspension on axle rear: air Purchase on credit is possible: Yes

Condition: new, mast type: telescopic, Year of construction: 2025, Vehicle Description: Hodjyc Dlzspfx Adhou Telescopic Wheel Loader JCB TM220 Year of manufacture: 2025 - brand new Weight approx. 6,322 kg Equipment: - 4-cylinder JCB Kohler diesel engine – Emission Stage V - Engine power: 54.5 kW (74 HP) - Comfort cab with heating and air conditioning - Air-suspended driver's seat - 40 km/h version - Wide tires 550/45R 22.5 Alliance - Front axle with 100% differential lock / LSD rear axle - LED work lights on the cab, 2x forward / 2x rear - LED work lights 2x on the boom - "SRS" Smooth-Ride-System – boom suspension - 3rd hydraulic circuit for attachments - Hydraulic quick coupler, Euro type - Hydraulic connections at the rear - Variable constant oil flow - Attachments available at extra cost Delivery via freight carrier possible. Freight costs to be borne by the buyer. Subject to change / errors / prior sale = More Information = Please contact Jens Schlüter for further details.