Used Work Platform Trailers for sale (70)

Condition: new, maximum load weight: 31,000 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,290 mm, loading space width: 2,520 mm, loading space height: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 tonne Gigant axles * Air suspension with lifting and lowering system and RtR valve * Manometer pressure indicator for determining load weight (axles separated into 2 air suspension circuits) * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fender with splash guard * Rear straight galvanized. Sheet steel aprons with splash guard * Reflective contour tape on the side and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power plug * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (switched via reverse gear) * Pull scissors with 50 mm pull eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front section in front of the bogie platform approx. 490 mm long with 45° corners * ROBOT welded ANTI-SLIP coating for the steel plate of the bogie platform * La-Si package consisting of: in front of the front wall support on the left & right 1 x 13.4 ton each. UVV lashing eye, 4 holes on each side in the bogie platform with a lashing force of 2 tons each, 1 pair of lashing eyes (13.4 tons) hanging at the rear left and right in front of the rear carrier, 4 pairs of UVV lashing rings (10 tons) on each side, can be swiveled and lowered, can be loaded in all directions and embedded in the outer frame, 3 stake pockets on each side with a simultaneous 2 ton lashing option * Hot-dip galvanized mechanical folding boom for a total width of 3 meters (but not in the rear slope) * Plank holder for widening under the chassis on the left in the longitudinal direction * Excavator boom storage above the rear axle to the end carrier approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 tons on each side. Lashing rings in the excavator boom storage * Hardwood floor on the running surfaces of the low-loading platform * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) mechanically laterally adjustable * Outer planks of the ramps made of hardwood Fedpfx Afol Tlhrsmjpp * Steel construction in preparation for 6-way control slide * Loading edge unloaded approx. 950 mm +/+ 20 mm chassis * Bogie, folding boom, mechanical drop supports, ramps hot-dip galvanized * --Axles, air tank, pull scissors painted in a black tone-- * Tires 235/75 R 17.5 * Vehicle has a daily registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: used, overall weight: 8,500 kg, axle configuration: 2 axles, first registration: 06/1998, loading space length: 4,300 mm, loading space width: 2,400 mm, loading space height: 850 mm, 2-axle BlomenRöhr Platform SDAH 8.5T Registration: June 1998 Manufacturer: BlomenRöhr Fpjdpfxjv Ridhj Afmep Unladen weight: 1980 kg Gross weight: 4500 kg Leaf spring suspension Tires: 215/75 R17 Length: 6240 mm / Height: 2360 mm No TÜV (German Technical Inspection) Further special equipment, data, or images upon request! Information provided without guarantee/errors excepted! Information provided online is non-binding descriptions and does not represent guaranteed properties. The seller is not liable for errors, input errors, or data transmission errors. Subject to change. Continuous purchase and sale, as well as trade-in and rental of municipal equipment/waste disposal and cleaning vehicles for sewer cleaning, wet waste disposal, and hazardous waste disposal

Condition: used, maximum load weight: 12,100 kg, overall weight: 16,000 kg, axle configuration: 2 axles, first registration: 01/2011, next inspection (TÜV): 12/2024, loading space length: 7,400 mm, loading space width: 2,500 mm, Equipment: ABS, * ABS Fodpfx Afevy Nw Tsmjpp * Orange rotating beacon * Duomatic air connection * 5-chamber rear lights * Front support winch * BPW ECO axles ----Structure: Open platform (loading height approx. 950 mm), hardwood floor, extendable by 1,685 mm at the rear, 4 extendable container locking pairs (Twist Lock), stainless steel storage boxes. Only sold to traders. ONLY THE NET PRICE IS PAYABLE FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT + ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales talks (see legal notice).

Condition: new, maximum load weight: 2,110 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,550 mm, loading space height: 200 mm, B27300/150 MACHINE TRANSPORTER Fodpfx Afsthlrhemopp TECHNICAL DATA * Trailer type B27300/150 * Total weight 2700kg * Payload 2075kg * Internal dimensions L: 305cm, W: 155cm, H: 20cm * Loading height approx. 54 cm * Floor multiplex wooden floor * Lashing points recessed in the loading floor * Side walls steel * Frame welded steel, hot-dip galvanized * Electrics 13-pin, 12V * Tires 185R14C * Axle manufacturer AL-KO or KNOTT * Number of axles 2 * Braked axle * Support wheel as standard * Walkable steel fenders * Shovel storage * Rear supports * Loading ramps - 200 cm plus vehicle registration document/ COC certificate 39.00 ¤ All prices include VAT. Images do not have to correspond to the standard equipment, technical changes (e.g. tire sizes) are subject to change. Delivery: Delivery by freight forwarder possible, per transport kilometer ¤ 1.50 throughout Germany one way (Seesen to destination) at least 270¤ plus VAT Visit us at =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=. You can also get your desired trailer and accessories here by arrangement: B L Y S S transporttechnik GmbH Dieselstr. 8 85084 Reichertshofen Tel.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.:.: .:.:.:.:.:.:.:.:.:.:.:.:.:.:.: B L Y S S transporttechnik GmbH Burenkamp 18-20 46286 Dorsten - Wulfen Tel =.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=.=. =.=.=.=.=.=.=. ?FINANCE OR LEASING POSSIBLE* Vehicle number (for customer inquiries) Images do not necessarily correspond to the standard equipment, technical changes (e.g. tire sizes) are subject to change.

Condition: used, axle configuration: 3 axles, first registration: 02/2018, loading space length: 6,060 mm, loading space width: 2,200 mm, loading space height: 300 mm, Subject to errors and prior sale! Internal number: 1448. EQUIPMENT * Platform trailer * 3 axles * Support wheel * AL-KO coupling * Planks all around ... and much more ----The vehicle is unprepared! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. Fpsdpfx Ajvwh U Sefmop We are happy to accept your vehicle as part payment. Financing/leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,380 mm, loading space width: 2,520 mm, Year of construction: 2024, * PT 30 profile: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 tonne Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smart board mounted on the trailer as an information tool (for axle load display - front and rear separately) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fender with splash guard * Rear straight galvanized. Sheet steel aprons with splash guard * Reflective contour tape on the side and rear * 15-pin power plug * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * Pull scissors 1,200 mm long with 40 mm pull eye and height adjustment via tension spring & turnbuckle * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated on the right side * Box in the bogie for accessories with hinged lid, 2 cont. locks permanently installed (directly after the bogie platform) Fpsdpfx Afjtplwiomsp * ROBOT welded ANTI-SLIP coating on the steel plate of the bogie platform (protruding weld beads) * La-Si package consisting of: 2 lashing eyes (13.4 tonnes) at the front left & right on the bulkhead support, front & rear 1 pair of UVV lashing rings (13.4 to.) and 3 pairs of UVV lashing rings (10 to.) on the side, swiveling and lowerable, loadable in all directions and embedded in the outer frame, 3 stake pockets on the side with simultaneous 2 ton lashing option * 6 pairs of mechanical folding booms for 3 m total width (but not in the rear slope) * Widening planks placed in the middle of the loading area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for later retrofitting of hydraulic. Ramp shift * Chassis, bogie, folding boom, drop supports and ramps hot-dip galvanized * Axles, slewing ring, air tank, drawbar painted in a black tone * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension, * New vehicle with manufacturer's warranty * Errors and interim purchase subject to reservation * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 16,400 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2024, * T3 profile 30.0: * EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Air suspension with lifting and lowering system * SmartBoard as an information tool on the trailer with pressure sensors for pressure display for total axle load display for each axle group * Side impact protection * Mechanically adjustable warning sign packages at the front and rear * Front axle closed. Plastic fenders and rear straight galvanized sheet steel aprons, each with splash guard * Hinged lid (hot-dip galvanized) for the tool box in the bogie platform * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated) on the right side * 15-pin power plug Fjdpfxjq Dyvce Afmepp * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Side marker lights with indicator control * Pull scissors with 40 mm pull eye and height adjustment via tension spring & turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) * Rubber covering on the folding ramps and on the ramp on the left and right (approx. 860 mm long) * Rubber covering on the longitudinal beams from the front to the end beam * Hardwood floor on the running surfaces of the low-loading platform * 4 stake pockets on each side with a simultaneous 2 ton. Lashing option * La-Si package consisting of: 5 pairs of UVV lashing rings that can be swiveled and lowered, can be loaded in all directions and are embedded in the outer frame - 13.4 tons in the corners, otherwise 10 tons * 6 pairs of mechanical folding booms for 3 m total width (but not in the rear slope) * Plank holder under the loading area in the longitudinal direction * Roller stop raised in front of the front beam with 1 x 6.4 ton lashing eye on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load holding valves * Hydraulic lateral ramp shifting * Hydraulic rear support (single-stage cylinder) * Hydraulic. Flow divider in the trailer (with hydraulic pump output in the truck of over 40 liters up to max. 140 liters/min.) * Hydraulic control block splash-proof * Two-line hydraulics * Loading area above the turntable: approx. 1,960 x 2,520 mm, * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loading height when loaded approx. 890 mm +/- 20 mm air suspension * Chassis, bogie, roller stop, folding extensions & ramps hot-dip galvanized. * Axles, turntable, pull scissors, air tank etc. painted in a black tone * Loading height when loaded: approx. 890mm +/- 20mm * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 14,550 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * RDÜ (tire pressure monitoring) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 11 tonnes Gigant axles * Air suspension, drawbar with 50 mm flanged drawbar eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Toolbox made of galvanized sheet steel, approx. 650 x 350 x 320 mm, on the right side (powder-coated in black) * Side impact protection * Plastic quarter fender Fpodpfx Aepk D D Hofmop * 15-pin power connector * LED taillights * Reinforcement package for drilling rig transport on the chassis - loading height + 20 mm * 50 mm clamped softwood floor * Device for retrofitting container locks in front of the bulkhead * Bolted bulkhead made of smooth sheet steel * Trapezoidal profiled sheet steel side walls, foldable with side wall spring jack * Steel rear wall retractable between the ramps - bracket inside in front of the bulkhead when not in use * Bolted rear stanchions * Perforated Outer frame angled at approximately 45 degrees with a 2-ton lashing capacity every 480 mm * Installation of 3-ton drop lashing brackets possible every 600 mm * 1 x 10-ton lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2-ton lashing capacity * One-piece mechanical Grating loading ramps with spring mechanism for one-person operation, approx. 2,750 x 620 mm (can be collapsed to within 20 mm) * Rear approach slope approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, rear folding supports, and loading ramps hot-dip galvanized * Axles, springs, air chamber, and landing gear painted in a single black tone * Wheelbase: 1,310 mm * Tires: 235/75R17.5 * Side walls painted in RAL 9010 pure white * Side walls painted in a single RAL color available for an additional charge * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ tire pressure monitoring * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 tonnes Gigant axles * Parabolic springs with compensating unit * Drawbar height adjustable by 300 mm - Drawbar extension by 250 mm to 2,250 mm * 15-pin power connector * LED lighting * Front landing gear * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead * Side impact protection * Plastic quarter fenders * 50 mm softwood floor * In front of the bulkhead and rear slope, provision for retrofitting container locks for transporting 20" containers * Bolted bulkhead made of smooth sheet metal * Trapezoidal sheet steel side walls, foldable, split in the middle once * Steel rear wall can be inserted between the ramp brackets when not in use * Bolted rear stanchions * Perforated outer frame Approx. 45-degree canted with a 2-ton lashing capacity every 480 mm, installation of 3-ton drop lashing rings possible every 600 mm, 1 x 6.3-ton lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2-ton lashing capacity * One-piece mechanical grating loading ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (collapsible up to 20 mm) * Rear approach slope approx. 860 mm chassis * Drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * Axles, springs, air chamber, flanged drawbar eye, and landing gear painted in a single black tone -- * Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Wheelbase 1,140 * Side walls painted in black RAL 9010 pure white * Side panels can be painted in a RAL color for an additional charge * New vehicle with manufacturer's warranty Fodpfx Ajv Eq Evefmspp * Errors and prior sale subject to change * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 11.9: * Loading area 6.27 m * Suitable for container transport * RDÜ tire pressure monitoring * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 tonnes. BPW axles * Parabolic springs with compensating unit * Drawbar height adjustable by 300 mm * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear Fpjdpsq Ra D Esfx Afmsp * Plastic quarter fenders * LED lighting * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stanchions, and loading ramps * 50 mm softwood floor * Device for retrofitting container locks in front of the bulkhead * Bolted smooth sheet metal bulkhead * Foldable trapezoidal steel side walls with side wall spring lifter * Steel rear wall can be inserted between the ramp brackets when not in use, inside the bulkhead * Bolted rear stanchions * Perforated outer frame, angled at approximately 45 degrees with a 2-ton lashing capacity every 480 mm * Installation of 3-ton Drop lashing rings available every 600 mm * 1 x 6.3 ton lashing ring in each of the front and rear corners * Various holes in the front and end beams for 1.2 ton lashing options * One-piece mechanical loading ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be collapsed to within 20 mm) * Rear approach slope approx. 860 mm * Wheelbase: 990 mm * Tires: 235/75R17.5 * Side walls painted in RAL 9010 pure white * Side walls painted in a RAL color available for an additional charge * Plastic toolbox * Subject to errors and prior sale * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, * T3 Profi 30.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Air suspension with manual lowering at the rear * Pressure gauge pressure display for determining the load weight (axles separated into 2 air suspension circuits), * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle closed. Plastic fenders and rear straight galvanized sheet steel aprons, each with splash guard * Reflective contour tape on the side and rear * Hinged lid (hot-dip galvanized) for the toolbox in the bogie platform * LED tail lights * Rotating beacon (removable) at the rear * Pull scissors with 40 mm pull eye and height adjustment via tension spring & turnbuckle * 2 x 7-pin power plugs * 4 stake pockets on each side with simultaneous 2 ton lashing option * La-Si package consisting of: 2 lashing eyes (6.4 ton) at the front left & right on the main frame of the bogie platform, 5 pairs of UVV lashing rings that can be swiveled and lowered, can be loaded in all directions and are embedded in the outer frame - 13.4 ton in the corners, otherwise 10 ton * 6 pairs of mechanical folding booms for 3 mtr. Total width (but not in the rear slope) * Widening planks placed in the middle of the loading area * hydr. one-piece loading ramps (approx. 3,000 x 720 mm) laterally adjustable * Loading area above the turntable: approx. 1,960 x 2,520 mm * Loading height unloaded approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm Fpedjl Tpwyjpfx Afmsp * Loading height unloaded approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar, folding extensions & loading ramps hot-dip galvanized * Axles, turntable, air tank etc. painted in a black tone * Tires 235/75 R 17.5 * Payload approx. 24,000 kg with 30,000 kg total weight * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 14,660 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 19.0: * Wabco EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10 t BPW Eco axles * Parabolic springs - 110 mm wide - with tandem compensation unit * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Lateral underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood floor * Fixture in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Trapezoidal-profiled steel side walls, foldable with tailgate spring assist * Rear steel wall, retractable between the ramps – with internal holder at the front bulkhead when not in use * Bolted rear stanchions * Perforated external frame, bent at approximately 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm Fodpsl Th Hwjfx Afmopp * One 10 t lashing ring in each front and rear corner, various holes in the bulkhead and rear cross member for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (retractable to 20 mm) * Ramp gradient at the rear approx. 860 mm * Chassis, drawbar, bulkhead, rear wall, ramps, and folding supports hot-dip galvanized * Side wall coating in RAL 9010 pure white * Other RAL color options for side walls available at extra cost * Axles, springs, air tanks, flange towing eye, and landing gear painted in black * New vehicle with full manufacturer's warranty * Errors and prior sale reserved * Immediately available from Egestorf

Condition: new, maximum load weight: 8,800 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 11.9: * Loading area 5.37 m Fodel Th Nrepfx Afmjpp * TPMS (Tire Pressure Monitoring System) * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with compensating unit * Height-adjustable drawbar by 300 mm * Jost landing leg at the front * External folding support legs at the rear * Plastic toolbox on the front right exterior of the front wall * Side underrun protection * LED lighting * Plastic quarter mudguards * 50 mm softwood floor * Bolted smooth sheet metal front wall * Drop-down trapezoidal steel side walls with sideboard-lifting spring * Steel rear wall can be slid in between ramp holders when not in use, stored inside in front of the front wall * Bolted rear stakes * Perforated outer frame approx. 45-degree angled with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing rings possible every 600 mm * Each front and rear corner with 1 x 6.3 t lashing ring * Various boreholes in the front and rear cross members for 1.2 t lashing possibilities * One-piece mechanical grid ramps with spring mechanism for single-person operation approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Rear approach angle approx. 860 mm chassis * Drawbar, front wall, tailgate, folding supports, and ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flanged towing eye painted in black * Wheelbase: 990 mm * Tyres 235/75R17.5 * Sideboard paintwork in RAL2011 deep orange * Side wall painting in RAL color available at extra charge * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 10,360 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: * RDÜ (tire pressure monitoring with display option in the truck via EBS signal without truck-side installation) * Electronic braking system EBS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 5.5 tonnes Gigant axles * Air suspension with lifting and lowering system * Drawbar height adjustable by 300 mm * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, outside the bulkhead * Side impact protection * Plastic quarter fenders * LED lighting system * 15-pin power connector * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * 50 mm softwood floor * Provision for retrofitting 20" counterlocks at the front and rear * Bolted smooth sheet metal bulkhead * Trapezoidal steel sheet sidewalls, foldable with side wall spring jack * Bolted hot-dip galvanized rear stanchions * Perforated outer frame, angled at approximately 45 degrees, with a 2-ton lashing capacity every 480 mm, installation of 3-ton drop lashing brackets every 600 mm possible, 1 x 6.3 ton lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2 ton lashing options * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 tonnes per pair) suitable for rubber-tired and tracked vehicles. Storage compartment recessed into the chassis below the loading area from the rear. * Vehicle hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf Fsdepk D Dqopfx Afmepp

Condition: new, maximum load weight: 16,750 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 11 to. Gigant axles * Air suspension with lifting and lowering system * In front of the bulkhead and rear slope, device for subsequent installation of container locks for transporting 20" containers * Drawbar with 50 mm flange drawbar eyelet and height-adjustable drawbar * Jost support winch at the front * External folding supports at the rear Fsdsl Tihxopfx Afmepp * Plastic tool box approx. 750 x 350 x 300 mm on the right side * Side impact protection * Plastic quarter fender * 15-pin power plug * LED lights * 21 tonne GG version with reinforced frame and reinforced axles * Reinforcement package for drilling equipment transport on the chassis * 50 mm softwood floor in clamped version * In front of the bulkhead, device for subsequent installation of container locks * Screwed bulkhead made of smooth sheet metal * Divided side walls made of sheet steel -trapezoidal profile- foldable with folding stanchion in the middle * steel rear wall can be inserted between the ramps - holder when not in use inside in front of the front wall * rear stanchions screwed * perforated outer frame bent at approx. 45 degrees with 2 ton lashing force every 480 mm * installation of 3 ton lashing brackets every 600 mm possible * 1 x 10 ton lashing ring in the front and rear corners * Lasi package with 2 x 8 ton lashing rings on each side, retractable in the outer frame, various holes in the front and end beams for 1.2 ton lashing option * one-piece mechanical Grating loading ramps with spring mechanism for one-man operation approx. 3,000 x 620 mm (can be pushed together to 20 mm) * Rear approach slope approx. 860 mm chassis * Drawbar, bulkhead, tailgate, folding supports and loading ramps hot-dip galvanized * Axles, springs, air tank and support winch painted in a black tone * Loading height unloaded approx. 940 mm * loaded approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Painting of the side walls Color freely selectable up to approx. 2 weeks before production date, but no metallic or special colors * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available from week 20/2025

Condition: new, maximum load weight: 14,400 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 19.0: * WabcoEBS-E (electronic braking system) * RDÜ tire monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lift and lowering system * Drawbar with 50 mm flange eyelet and height adjustment of 110 mm via offset plate Fpsdsmi Tmajpfx Afmep * Jost landing gear at the front * Outward folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Side underrun protection * Plastic quarter mudguards * 15-pin power plug * Multi-chamber tail lights * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor in clamped version * Preparation in front of the front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet metal * Split steel side walls - trapezoidal profile - foldable with center folding stanchion * Steel rear wall can be slid in between the ramps - holder for non-use inside in front of the front wall * Rear stakes bolted * Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t quick-lash rings possible every 600 mm * Lasi package: in the corners at the front and rear each 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in the outer frame, various holes in the front and end carrier for 1.2 t lashing options * One-piece slide-in ramps approx. 2,750 x 620 mm * Approach angle at rear approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports and drive-on ramps hot-dip galvanized * --- Axles, air tanks, flange eyelet and landing gear painted in a shade of black --- * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and interim sale excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 14,200 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2023, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 11 ton Gigant axles * Air suspension * Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm by offset plate * Jost support winch at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin power plug * LED lights * Reinforcement package for drilling device transport on the chassis * 50 mm softwood floor in clamped design * Fixture in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Split side walls made of steel sheet - trapezoidal profiled - folding down with folding stanchion in the middle * Steel rear wall, insertable between the ramps - holder for when not in use located inside in front of the bulkhead * Rear stanchions bolted * Perforated outer frame bent at approx. 45 degrees with 2 ton lashing capacity every 480 mm * Installation of 3 ton folding lashing brackets possible every 600 mm * Lashing package: in the corners at the front and rear 1 x 10 ton UVV lashing ring each, on each side 2 x 8 ton UVV lashing rings retractable in the outer frame, various holes in the front and end carrier for 1.2 ton lashing possibility * One-piece mechanical grating ramps with spring system for one-man operation, approx. 3,000 x 620 mm (can be pushed together to 20 mm) * Approach slope at the rear approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports and ramps hot-dip galvanized * Axles, air tanks, flanged towing eye and support winch painted in a shade of black * Loading height unloaded approx. 940 mm * Loading height loaded approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side walls painted in RAL 9010 pure white Fpedpol Tp Azsfx Afmop * Painting of the side walls in an RAL color for an additional charge possible * Vehicle has a day registration (without use) * Errors and prior sale reserved * Immediately available from Egestorf on the A7

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring) * EBS electronic brake system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Air suspension * Tow bar height adjustable by approx. 300 mm - tow bar extension by 250 mm to 2,250 mm * Jost support winch at front * LED rear lights * Exterior hot-dip galvanized folding supports at rear * Plastic toolbox front right outside at the front wall * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and tow bar, front wall, rear wall, tailgate, and loading ramps * 50 mm softwood floor * Mounting fixture in front wall for retrofitting container locks * Bolted front wall made of smooth sheet metal * Side walls made of profiled steel sheet - foldable with side wall spring loader * Steel rear wall insertable between ramp holders; when not in use, stored inside at the front wall * Bolted rear stanchions * Perforated outer frame approx. 45 degrees bent with 2 t lashing force every 480 mm, installation of 3 t folding lashing brackets every 600 mm possible, in front and rear corners 1 x 6.3 t lashing ring each, various holes in front and rear cross members for 1.2 t lashing options * One-piece mechanical grid ramp with spring mechanism for one-man operation approx. 2,750 x 600 mm (can be compressed down to 20 mm) Fpsdpjq Dyvyefx Afmop * Rear approach angle approx. 860 mm * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Side wall color in RAL 9010 pure white * Painting of side walls in other RAL colors possible at extra charge * New vehicle with manufacturer warranty * Errors and prior sale reserved * Immediately available from Egestorf

Condition: new, machine/vehicle number: AHW MT3080, overall weight: 3,000 kg, loading space length: 3,080 mm, loading space width: 1,520 mm, ANHÄNGERWIRTZ, your online pick-up market for new trailers, offers top brand models ready for immediate pick-up! Over 850 new trailers in stock Over 100 used trailers permanently available More than 150 vehicle transporters – popular models with extensive accessory options in stock Non-binding example: Exhibition trailer ready for collection Brenderup Machine Transporter MT 3080 GD 308x152cm 3000kg, low loader with tandem axle, V-drawbar, loading ramp as rear gate with support leg 13-pin plastic connector, 14-inch tires Support wheel, 6 inside lashing rings / 400 daN Digger bucket resting area Non-slip fender covering and running board Hot-dip galvanized, high-quality, sturdy phenolic plywood floor Robust metal wheel chocks, position lighting Recessed lights Spare wheel, including holder below the bucket tray The largest range of transporters available immediately Sales and order acceptance by phone during the day, Fedoxq Sbxjpfx Afmopp or 24/7 via our trailer shop All images and descriptions in this advertisement are protected by copyright – logos and brands by trademark law 10/25 39033

Condition: good (used), functionality: fully functional, machine/vehicle number: YGCD160XTF0017195, maximum load weight: 215 kg, first registration: 07/2015, next inspection (TÜV): 11/2027, total length: 6,155 mm, total width: 1,800 mm, total height: 2,300 mm, tire size: 195R14C 106N, color: red, Year of construction: 2015, operating hours: 2,588 h, Feel free to contact us for a detailed quote or to schedule a viewing appointment! Your HEMATEC Arbeitsbühnen GmbH // Official Germany representative for aerial platform manufacturers KLUBB, ISOLI, and DINO, with branches in Dresden, Vehlefanz (near Berlin), Göttingen, and Lauchheim. If you are interested in aerial work platforms, you are also welcome to contact us. Fodjxu D Raepfx Afmjpp