Used Fliegl Push-Off Trailers for sale (341)

Condition: used, maximum load weight: 18,000 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 12/2015, next inspection (TÜV): 02/2027, loading space length: 10,330 mm, loading space width: 2,520 mm, loading space height: 900 mm, Total weight: 24,000 kg / 30,000 kg Unladen weight: 6,000 kg Payload: 18,000 kg / 24,000 kg Overall length: 10,330 mm Dwodpfxez Igkte Aansc Loading length: approximately 8,300 mm overall / approximately 6,500 mm low-bed including rear overhang Width: 2,520 mm Loading height: 900 mm Further information: - 3 m widening - Warning signs front and rear - Twin tires - Spring-loaded ramp - Storage compartment in the gooseneck

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21801003760, empty load weight: 4,480 kg, maximum load weight: 13,520 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2014, total length: 10,020 mm, total width: 2,550 mm, tire size: 445/45 R19,5", color: grey, Platform Trailer – Specifications Chassis Fine-grain steel welded construction 1-speed landing leg at the front with straight foot and single-side operation on the right-hand side Wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Half fenders extending slightly beyond the main frame Rear impact buffers Drawbar Tandem trailer drawbar with certified 50 mm towing eye Transport version with under-mounted coupling drawbar Axles & Suspension BPW disc brake axles (manufacturer's choice) Air suspension with raise/lower valve Wheels & Tyres 445/45 R19.5 tyres (manufacturer's choice) Steel wheels, factory silver finish Braking System Dual-line air brake system Spring parking brake Front Duomatic connection with connecting line to the towing vehicle Haldex Electronic Braking System (EBS) with front EBS connector and connecting cable Dsdpfx Aaeni Udzjnowc Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality Loading Platform Platform length: approx. 7,300 mm Phenolic plywood floor Front Wall Aluminium front wall, approx. 1,200 mm high Heavy-duty steel corner posts (volume design) Electrical System 24 V electrical system Multi-chamber lights Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Registration & Certification Country of registration: Germany DEKRA inspection and certification 24/7 service hotline Prepared for single-line licence plate holder ECE R48 contour markings with white reflective strips on the sides and red reflective strips at the rear

Condition: used, maximum load weight: 6,800 kg, overall weight: 8,900 kg, axle configuration: 2 axles, first registration: 06/2012, loading space length: 4,000 mm, loading space width: 2,050 mm, loading space height: 700 mm, total width: 2,550 mm, Gross weight: 8,900 kg Unladen weight: 2,100 kg Payload: 6,800 kg Overall length: 5,950 mm Loading length: platform length 4,000 mm Width: platform width 2,050 mm / 2,550 mm Loading height: platform height approx. 630 mm Further information: Dwedpfx Aoycbkbsanjc - Telescopic support legs at the front - Drawbar height adjustable via spindle - Fine-grain steel welded construction - Parabolic suspension - Steel checker plate floor - Large lashing package - Ramp with grating

Condition: used, axle configuration: 3 axles, first registration: 12/2019, Year of construction: 2019, Equipment: ABS, Fliegl light container chassis + Singamas tank with measuring system, lift axle, SAF Everything at a glance: · First registration: 12/30/2019 · Year of manufacture: 2019 · Color: Red · Tare weight: 3,580 kg · Tires: 385/65 R 22.5 · Note: 1 unit available immediately Special equipment: · Light container chassis for: 1x20' centrally + 1x30' flush at the rear · SAF axles · Lift axle Dwjdpfx Aaoz Nuqfjnoc · 2 pcs. hose pipes, plastic · ADR sign · EBS · ABS · Contour marking · 1 set of wheel chocks · Aluminum side guard · 1x 15-pin electrical connection. Singamas 26-liter tank · DEZIDATA measuring system · Stainless steel box Standard equipment: · 3-axle · Disc brakes, 430mm, lifting and lowering valve Errors, typos and prior sale excepted. The seller reserves the right to withdraw from the sale. Copyright: All texts, images and videos in this advertisement are subject to the copyright of STARENT Truck & Trailer GmbH. Any use, reproduction or distribution - even in part - is not permitted without express written consent. _____ Internal number for inquiries: TR26283 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Contact persons for sales: Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: WhatsApp t: @: Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / WhatsApp t: -104 @: Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / WhatsApp t: -123 @: We speak 13 languages. Probably yours too. Contact us! Homepage: / Facebook: / Instagram: / Starent Truck & Trailer GmbH buys your commercial vehicles such as semi-trailer tractors, trailers, trucks and vans. Contact persons for purchasing: Michael Doblhofer (German, English) p: WhatsApp t: -102 @:

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 1,900 kg, maximum load weight: 18,100 kg, overall weight: 20,000 kg, axle configuration: 1 axle, total length: 7,650 mm, total width: 2,550 mm, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins, 2 pairs of removable guide rollers 4 container locks with sturdy arms based on a 20-standard for 7.45- and 7.82-swap bodies 24-metric-ton, 2-speed support jack, single-side operation, with straight lower section, without thrust compensation 2 wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders with anti-splash flaps *Axle + Suspension Disc brake axle, with 430 mm disc diameter, Dsdpfxsi Rixnj Aanjwc Air suspension with lift & lower valve, with hold function for lift & lower *Wheels and Tires 385/65 R 22.5 Steel rims, factory silver *Braking system 2-line compressed air braking system Spring-loaded parking brake 2 reverse-proof coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in the front, without connecting cables *Registration / Plates Country of registration: Germany With DEKRA inspection and certification (per §13 EG - FGV) Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Warning sign per ECE - 70 *Paint Finish Frame: Hot-dip galvanized or painted per customer request Support feet: Black coated

Condition: good (used), Year of construction: 2018, Semi-trailer, Fliegl, for external filling only, 3-axle Dodez Nrdcspfx Aanewc Tire size: 365/65R22.5 = Further information = Technical condition: good Optical condition: good Please contact Ria Lange for further information.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,900 kg, maximum load weight: 22,100 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, total length: 10,900 mm, total width: 2,550 mm, total height: 860 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Equipment: center pivot plate, Custom Transport Solution Configure your Fliegl trailer to your individual requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Heavy-duty welded steel low-loader turntable trailer with robust ball-bearing turntable. Folding rear support. Aluminium side underrun protection. Full-width rear mud flap. Quarter mudguards in front of the 1st axle. Extendable loading platform up to 3,000 mm. Integrated storage compartment for timber extension beams. 70 mm timber extension planks included. Two pairs of recessed wheel wells: Front wheel wells behind the gooseneck, approx. 1,600 mm long and 400 mm deep. Rear wheel wells between the axles, approx. 600 mm long and 300 mm deep. Removable steel covers for wheel wells. Main frame spacing approx. 1,280 mm in wheel well area. Lashing Equipment 1 pair of 10 t lashing cut-outs in the gooseneck 4 pairs of 5 t lashing holes in the outer gooseneck frame 7 pairs of recessed 10 t lashing mushrooms Lashing point spacing max. 1,100 mm Recessed stake pockets (70 × 40 mm), convertible to 5 t lashing rings Additional 10 t folding lashing rings on the gooseneck and rear beavertail Drawbar Height-adjustable drawbar with certified 40 mm towing eye. Axles & Suspension SAF drum brake axles Laser-aligned axle/suspension geometry for reduced tyre wear and fuel consumption Air suspension with raise/lower valve Wheels & Tyres 235/75 R17.5 tyres Twin steel wheels, factory silver Braking System Dual-line air brake system Spring parking brake Electronic Stability Program (ESP) Axle load indication via EBS CAN bus Front air couplings with connecting lines Parking sockets for ABS/EBS and air connections 24 V EBS with front connector Trailer Info Module displaying axle loads, mileage and diagnostic data Dwedozl Uv Uepfx Aanoc Electrical System 24 V full LED lighting LED side marker lights LED number plate light LED front position lights LED rear outline marker lights Parking sockets for electrical connections Extendable illuminated LED warning boards up to 3,000 mm Loading Platform Steel chequer plate on gooseneck Integrated storage box in transition area Approx. 70 mm timber floor Steel chequer plate over wheel wells Rear beavertail with 70 mm timber decking Total low-bed deck length incl. beavertail: 6,500 mm Loading Ramps Hydraulic steel loading ramps Length: 3,000 mm Width: 750 mm Side-adjustable Foldable lower ramp locking system Mega Grip serrated grating surface with chequer plate ramp tips Hydraulic operation via tractor PTO with flow restrictor Hydraulic connection with SVK coupling (NW 10/3)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,700 kg, maximum load weight: 21,300 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,520 mm, total length: 11,425 mm, total width: 2,550 mm, total height: 900 mm, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are customised to customer requirements. #Low Loader Drawbar Trailer Chassis Welded steel construction 1st pair of recessed wheel wells in track area 2nd pair of recessed wheel wells between axles in track area Removable wheel well covers with steel inserts Turntable with heavy-duty ball race, recessed storage box in front section Hydraulic rear support legs Aluminium storage box with stainless steel lid, W 600/H 400/D 500 mm Extendable outriggers to 3,000 mm at wheel well extensions Central storage compartment for timber planks 70 mm timber planks for 3,000 mm extension Climbing strips on outer rear bevel frame #Lashing Points Low Loader 3 pairs of 10 t recessed lashing points in front floor 6 pairs of recessed 10 t mushroom lashing points in top and side outer frame Combined stake pockets with bolted ring lashing eyes, 5 t each, recessed in outer frame, approx. 72 x 42 mm internal size Additional recessed folding lashing rings in low loader deck, 10 t each #Drawbar Equipment Cranked drawbar #Axles + Suspension Drum brake axles, manufacturer's choice "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption #Braking System Twin-line air brake system Colour-coded pipe routing for easy servicing Spring parking brake Front Duomatic coupling with connection line to towing vehicle 24 V ABS and ALB with front ABS plug and connection cable #Wheels and Tyres 235/75 R 17.5 steel wheels, twin fitment, factory silver #Electrical System 12–24 V LED multi-chamber lights, side yellow LED lights, LED number plate light 2 front white LED position lights 2 rear white/red LED outline marker lights 1 x 15-pin front plug with connection cable 1 x 7-pin agricultural plug For use with 12/24 V LED lighting Additional rear LED work lights LED beacon with bracket 2 pairs of illuminated LED warning boards, extendable to 3,000 mm Djdpfx Aeznux Ieanewc #Floor Front steel floor, followed by approx. 70 mm softwood floor Rear bevel with 70 mm softwood floor Low loader deck incl. rear bevel: 9,000 mm #Loading Ramps Climbing strips on ramp outer frame Timber-covered Hydraulic operation via PTO with flow control, left-hand side operation in direction of travel Individually controlled hydraulic side shift of loading ramps (only with hydraulic ramp operation) Hydraulic connection with SVK plug NW 10/3 incl. connecting hose #Registration / Plates Complete combination approval report for §70 permit application for one towing vehicle upon collection from Triptis (observe max. permitted gross combination weight in truck documents; apply for uprating in advance if required; approval is at the truck manufacturer's discretion. Any resulting costs will be charged separately) 24/7 service hotline Prepared for two-line number plate holder Reflective contour markings to ECE R 048, white sides, red rear

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 1,850 kg, maximum load weight: 8,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 3,100 mm, loading space width: 1,740 mm, total length: 4,900 mm, total width: 2,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Tandem Low-Bed Trailer for Skip Containers * High-tensile steel welded chassis construction * 1 pair of adjustable and removable skip container locking wedges * 1 pair positioned in front of the container * Lashing rails for skip containers on both sides of the body * Front jockey wheel * Steel mudguards covering both wheels * Aluminium side underrun protection * 2 wheel chocks with holders * Recessed rear storage compartment integrated into the floor, approx. 650 × 240 × 240 mm (W × L × D), with slightly raised lid ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * 2 Euro axles (manufacturer's choice) with tapered roller bearings and S-cam drum brakes * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Parabolic leaf suspension with maintenance-free steel-rubber bushings and mechanical load equalisation (walking beam system) ### Wheels & Tyres * 235/75 R 17.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * 24 V ABS and automatic load-dependent braking (ALB), with front ABS connector and connecting cable Dwsdpfx Aaszhfzgonoc Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 × 7-pin non-interchangeable front connectors with connecting cable ### Low-Bed Body (TTS) * Low-profile steel well body * Steel floor plate * Steel side walls fully welded to the floor for maximum durability Note: Minor floor distortion caused by the welding process is technically normal. ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis painted in customer's colour * Drawbar painted to match the chassis --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,000 kg, maximum load weight: 31,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,330 mm, loading space height: 1,950 mm, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,470 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ## Chassis – Semi-Tipper Trailer * High-tensile fine-grain steel welded lightweight construction with slight frame offset * Fifth wheel plate with replaceable 2” king pin * 24-tonne 2-speed landing gear, single-side operation, with semi-round base and straight mounting plate * Integrated mudguard mounting system with stone-repellent surface finish * Spray flaps only on last axle * 1 tarpaulin support bar with holder * 1 aluminium ladder approx. 3,550 mm with side mounting brackets * 2 rear towing hooks * Side-mounted tarpaulin bow holder on chassis ## Axles & Suspension * SAF disc brake axles with 430 mm brake discs * Laser-aligned axles and running gear for reduced tyre wear and fuel consumption * Air suspension system * 1st axle as automatic lifting axle, additionally electronically controlled from the truck * Includes forced lowering and traction aid * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust ## Braking System * Dual-line compressed air braking system * Colour-coded pipe routing for easy maintenance * Two non-interchangeable coupling heads at the front * 24 V EBS electronic braking system with front EBS socket * Raise-and-lower valve integrated Note: The trailer may only be operated with towing vehicles ensuring proper ABS functionality. ## Vehicle Stability System * Automatic tipping lowering function with shut-off valve Dwsdpfjzhgkiox Aanjc * Axle load detection via EBS CAN bus signal for display in the driver’s cabin ## Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims, factory silver finish * TPMS (Tyre Pressure Monitoring System) according to ECE R141, displayed via truck EBS system ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights linked to indicators (flashing side lights) * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 2 × 7-pin and 1 × 15-pin front sockets * 2 additional integrated rear LED work lights ## Hydraulic System * Low-pressure hydraulic cylinder, max. 170 bar * First stage hard chrome plated * HDK screw coupling, fixed section, NW 48 mm * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut ## Tipping Body – Steel Tipping Body (HB 400) * High wear-resistant HB 400 steel body construction * Sloped front wall with external hydraulic cylinder mounting * Foldable aluminium protective sheet on right-hand side for sliding tarpaulin * External shovel and broom holder on front wall * Internal access ladder at front wall * Side walls: 4 mm continuous steel * Floor: 5 mm continuous steel ### Rear Door System * “Membrane” tailgate design * Two-piece rear door (50/50 split) * One sliding bolt integrated into right-hand door leaf * External rotary locking system with bottom mechanical locking ## Operating Platform & Equipment * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction) * Central locking on left-hand side

Condition: used, machine/vehicle number: WFDFLT21802036332, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total length: 10,020 mm, total width: 2,550 mm, total height: 1,070 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 60 %, color: grey, Swap-Body Trailer Please note: the images shown are archive photos. #Weights and Dimensions - Gross vehicle weight: 18000 kg - Payload approx.: 14800 kg - Bogie load: 18000 kg - Nose weight: 1000 kg - Unladen weight (base version) approx. only: 3200 kg +/- production tolerance - Overall length with 7820 mm swap body approx.: 10020 mm - Overall width max.: 2550 mm - Frame height lowered approx.: 1010 mm - Frame height raised approx.: 1390 mm - Frame height in travel position approx.: 1070 mm - Parking height approx.: 1040 to 1320 mm - Standard stop to front locking device approx.: 985 mm Djdszu I D Rjpfx Aanswc - Locking distance: 5853 mm - Coupling height approx.: 380 mm - Drawbar length set from 7820 mm swap body stop approx.: 2200 mm - Parking heights apply on level ground. - The towing vehicle must have a similar lift range to the trailer, otherwise the unit will stand at an angle. #Chassis - Swap-Body Centre-Axle Trailer - Fine-grain steel welded construction - Front stop, longitudinally adjustable and foldable - 2 pairs of removable guide rollers, front and rear - 4 twist locks with sturdy brackets on a 20" base, for 7.45 m and 7.82 m swap bodies (note: combined with the underrun protection, this protrudes on a 7.15 m swap body) - 1 pair of geared landing legs front, with straight foot and single-side operation on the RHS (direction of travel) - 1 pair of geared landing legs rear, with straight foot and single-side operation on the RHS (direction of travel) - 2 wheel chocks with holder - Aluminium side impact protection - Steel rear underrun protection - Full-width rear mudflaps (not in combination with forklift pockets) - Half-shell mudguards - Mudflaps #Coupling Gear - Centre-Axle Trailer - Drawbar with certified 50 mm tow eye, haulage-specification version - Low-mounted drawbar coupling, 2200 mm - Coupling height: 380 mm #Axles and Suspension - SAF disc brake axles - Axles/chassis laser-aligned - reduces tyre wear and fuel consumption - Air suspension #Braking System - 2-line air braking system - Colour-coded pipework for easy servicing - Air reservoir capacity 208 litres - Spring-loaded parking brake - 2 anti-mismatch coupling heads at the front, with connecting lines to the towing vehicle, connection on the RHS - 24-volt EBS electronic braking system with EBS connector at the front, with connecting cable, connection on the RHS - Warning: this trailer must only be towed by towing vehicles that guarantee the effectiveness of the ABS! - With lift-and-lower valve, hold function in both lowered and raised positions #Wheels and Tyres - 445/45 R19.5" make of manufacturer's choice - Steel rims, factory silver #Electrics - 24-volt multi-chamber lights, yellow LED marker lights at the sides - 2 white front position lights - 2 white/red rear tail lights - 2 x 7-pin anti-mismatch connectors at the front, with connecting cable, connection on the RHS - LED work lights on both sides (switched via reversing light) - 2 additional LED work lights at the rear, switched via reversing light - 1 LED work light at the front, centred between the beams, facing rearward, switched via reversing light #Country of Registration / Plates - Germany - With Dekra inspection and certificate (in accordance with §13 EC-FGV) - 24/7 service hotline - Prepared for single-line number plate holder - Contour marking with reflective tape to ECE R 048, white at the sides and red at the rear

Condition: used, Year of construction: 2022, Equipment: compressed air brake, ASW 271 GIANT (0010) Used Fliegl ASW 271 Gigant (0020) Tandem axle, leaf suspension, trailing steering (0030) K80, lower hitch, air brakes Dwedpfxjzuut Ej Aanec (0040) Tyres: 560/60R22.5 BKT,

Condition: used, first registration: 06/2018, Year of construction: 2018, Fliegl ZWP 180 ZWP 2-axle platform trailer ∗AS NEW∗ ! 4 units available ! ● First registered: 06/2018 ● Vehicle dimensions: 9,150 mm x 2,480 mm (L x W) ● Fully air-suspended ● Lifting/lowering system ● ABS ● 2 x air-suspended BPW axles, 9 tons each Dwodjzlwpdopfx Aanoc ● GVWR: 18,000 kg ● Unladen weight: 2,610 kg ● Payload: 15,390 kg ● Tire size front/rear: 385/65 R22.5 ● Tread depth: 8/8 / 7/7 mm - German vehicles! - 1st owner! - MOT / inspection: upon request and possibly with an extra charge: new!! Errors and prior sale excepted! = Further information = Unladen weight: 2,610 kg Payload: 15,390 kg GVWR: 18,000 kg

Condition: used, machine/vehicle number: WFDFLT21601003373, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 11/2013, total length: 5,200 mm, total width: 2,550 mm, tire size: 285/70 R19,5", color: grey, 4 UNITS AVAILABLE! – 4 UNITS AVAILABLE! – 4 UNITS AVAILABLE! – 4 UNITS AVAILABLE! Conversion to CLG dolly in progress – some units already completed. Please note: The photos shown are archive images and may differ from the actual vehicle. # Chassis Heavy-duty fine-grain steel welded construction Fifth wheel coupling (manufacturer of our choice) for 2" kingpin with ball-bearing turntable, steering angle max. 20° Telescopic landing leg 2 wheel chocks with holders Steel rear underrun protection Half-shell mudguards CLG drawbar with certified 50 mm towing eyes for connection to both the dolly and the towing truck. # Axles + Suspension BPW disc brake axles Air suspension with raise/lower valve # Brake System Dual-line compressed air braking system Spring parking brake 2 non-interchangeable air couplings at the front with connecting lines to the towing vehicle 2 non-interchangeable air couplings for the semi-trailer Electronic Braking System (EBS) with front EBS connector and connecting cable EBS connection cable for the semi-trailer Axle load detection for the truck via EBS Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality. # Electrical System Djdpfx Aezm Trqoanewc 24 V electrical system Multi-chamber lighting Yellow LED side marker lights 2 white LED front position lights 2 white/red LED rear outline marker lights 1 × 15-pin connector with cable to the towing vehicle 1 × 15-pin connector with cable to the semi-trailer # Registration Prepared for registration in Germany DEKRA approval included Prepared for single-line number plate holder ECE R48 reflective contour markings (white sides, red rear) # Dimensions Fifth wheel height: approx. 1,150 mm Drawbar coupling height: approx. 380 mm Archive photos – actual vehicle may vary.

Condition: used, axle configuration: 2 axles, first registration: 12/2019, color: other, Year of construction: 2019, Please contact us for more information. Dwodpfozvdnnjx Aanjc

Condition: used, functionality: fully functional, color: red, trailer brake: trailer unbraked, Shunting locomotive / Shunter / Switching locomotive Dwedpozix R Defx Aanoc

Condition: used, maximum load weight: 24,700 kg, overall weight: 35,500 kg, axle configuration: 3 axles, first registration: 09/2011, Year of construction: 2011, Equipment: ABS, * FLIGEL SDS 410 T * Tilting bed * Steering axle * Lift axle Dwodpfx Aajzmk Ddenec * Winch * Year of manufacture: 2011 * Good condition * Working hours: Mon-Fri 07:30-12:00, 13:00-18:00, Saturday 07:30-17:00. * E-mail: * Tel/WhatsApp/Viber: Alexandar Ilic * Tel/WhatsApp/Viber (English): Magdalena Ilic

Condition: used, maximum load weight: 30,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2019, next inspection (TÜV): 06/2025, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,380 mm, Equipment: ABS, Fliegl DHKA 390 SDS01 30m³ Rear Tipper Aluminum Body Light 3-axle rear tipping semi-trailer with lightweight aluminum body, Type DHKA 390 – 30 m³ with attached rear tailgate, Greenline----### Aluminum Body Light / Aluminum Box Body ###---- Aluminum tipping body, Capacity: approx. 30 m³, Fifth wheel height: approx. 1,200 mm, Gross vehicle weight rating (GVWR): 35,000 kg, Unladen weight: 4,800 kg, Payload: 30,200 kg, 1st axle liftable, Roll tarp, foldable to the front-right side, with central locking to the front-left, 2x LED work lights at rear, SAF axles, Steel standing platform with anti-slip grate and safety railing, Hard-chromed tipping cylinder, Rear underrun protection, foldable, 1x drop-down support leg, Disc brakes, Broom and shovel holder mounted on front wall, Air suspension, Pendulum tailgate, mechanically locked (2-hook locking), Pendulum tailgate/rear wall sealed with rubber gasket, Side wall locking with screw fasteners, 1x grain slide, 1x side storage compartment on the left, 1x front storage compartment, Mudguards on all wheels, Loading platform dimensions (LxWxH): approx. 7,200 x 2,420 x 1,750 mm, Side wall height: approx. 1,750 mm, Loading height: approx. 3,239 mm, External dimensions (LxWxH): approx. 8,600 x 2,550 x 3,340 mm, Wheelbase: 3,100 x 1,310 x 1,320 mm, Tyres: 385/65R 22.5 on aluminum rims, Tread depth tyres left front: 14 mm, Tread depth tyres left center: 14 mm, Tread depth tyres left rear: 4 mm, Tread depth tyres right front: 12 mm, Tread depth tyres right center: 15 mm, Tread depth tyres right rear: 12 mm, Tipping floor worn Additional equipment: Overall length: approx. 8,600 mm, Overall width: approx. 2,550 mm, Overall height: approx. 3,340 mm, Internal body height: approx. 1,750 mm, Capacity: approx. 30 m³, Fifth wheel height: approx. 1,200 mm, Frame neck height: approx. 190 mm, King pin mounting dimension: approx. 600 mm, Central telescopic support, Uncoupling when loaded not possible; when uncoupled, the vehicle must be positioned sloping rearward, Rear underrun protection, foldable, Half-shell mudguards, Tarp pole with holder, Aluminium ladder approx. 3,550 mm with side holder, SAF disc brake axles, Air suspension, 1st axle automatic lift axle, additionally electrically operated from the truck, with start-off aid, truck installation not necessary (start-off aid functional up to axle overload of 30% and max. speed of 25 km/h), Spring-loaded parking brake, EBS, Electronic Braking System with EBS socket at front, without connection cable, Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! 24 volt, 4x 3-chamber rear lights + 1 round reverse light + 1 round rear fog light, all LED, 2 white position lights at front, 1x 15-pin socket at front, without connection cable, Low-pressure cylinder max. 170 bar, with HDK screw coupling, fixed, NW 48 mm, Hard-chromed tipping cylinder, Bodies: Aluminum box body made from high-quality, wear-resistant material, Sloped front wall, 5 mm thick, With external cylinder mount, Side walls of 30 mm hollow chamber profiles, precisely welded, With bulk material deflecting upper rail profile, Greenline – conical, aerodynamic body shape, 'membrane' rear wall, Rear wall as pendulum tailgate, externally mounted with double hook locking, Rear wall with additional clamping bolts at the sides and bottom, Dwsdpfx Aowr Ry Eoanoc Rear wall with rubber gasket, Note: Heat-resistant up to max. 170°C!, Central grain chute, Continuous floor 6 mm t

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,250 kg, maximum load weight: 14,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 1,120 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis for central-axle swap trailers Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy 20"-based arms for 7.15 m, 7.45 m, and 7.82 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) 1 pair of front gear-driven support legs, with straight lower section and single-sided operation on the right side 1 pair of rear gear-driven support legs, with straight lower section and single-sided operation on the right side Side impact protection set inward, for optimal clearance to the swap body supports Steel underrun protection Rear mud flaps across the entire width *Towing equipment for central-axle trailers Towing beam with certified 50 mm tow eye, freight forwarding version Towing beam clamped/bolted, easily replaceable and partially adjustable in length! Lower coupler on towing beam, free towing beam length approx. 2200 mm Folding bracket with spring support on the towing beam, for routing the connection cables to the truck *Axles + Suspension SAF disc brake axles “Laser-aligned axles/chassis” reduces tire wear and fuel consumption Air suspension without lift axle *Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Air reservoir: 208 liters Spring-loaded parking brake Duomatic connection at the front, with connecting line to the tractor unit, connection at the rear right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection at the rear right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve, hold function in both lower and lift positions Vehicle – Vehicle Stability Control System Brake release function via a pushbutton on the vehicle next to the lift & lower valve, for releasing the brake while coupled; EBS power supply must be ensured! *Wheels and Tires 385/55 R22.5" Manufacturer's choice Steel rims, factory silver *Electrical System 24 volts, multi-chamber LED lights, yellow LED side lighting, LED license plate lighting, (Note: With certain towing vehicles, false diagnostics may occur even though the function is working properly) 2 white LED front position lights 2 white/red LED rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection on the right rear Additional LED work light(s), recessed and integrated into the rear, activated via the reverse light LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of Registration/License Plates Germany With DEKRA approval and certification (per §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Dwsdpfx Aaszd Trrjnoc Warning sign per ECE - 70 ADR warning sign at the rear, foldable Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted according to customer specifications

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,220 kg, maximum load weight: 14,780 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 1,070 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis for swap body with central axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear Swap Guard – swap body guide, in front of and behind each container lock 4 container locks with sturdy 20"-based arms for 7.15, 7.45, and 7.82 swap bodies 1 pair of front gear support legs, with straight lower section and single-sided operation on the right side 2 wheel chocks with holders Aluminum side impact protection Steel underrun protection Rear mud flaps across the entire width (not compatible with forklift mount) 4 half-shell fenders Mud flaps Spare tire mount for 1 electric bike, with wheel mounting kit Towing equipment for central-axle trailer Towing beam with certified 50 mm tow eye, freight forwarding version (not suitable for trucks with tail lifts; detailed verification may still be required on a case-by-case basis) Towing bar coupler, free towing bar length approx. 2200 mm Folding bracket with spring assistance on the towing bar, for routing the connection cables to the truck *Axles + Suspension SAF disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir capacity: 208 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the motor vehicle, connection at FR-right EBS, Electronic Braking System with EBS connector at the front, including connecting cable, connection at FR-right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions *Wheels and Tires 445/45 R19.5", brand selected by the manufacturer Steel rims, factory silver *Electrical system 24 volts, 4 x 3-chamber lights + 1 round backup light and + 1 round rear fog light, yellow LED lighting on the sides 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection at the rear right 2 Additional LED work light(s) at the rear, activated via the reverse light *Country of registration/license plates Germany With DEKRA approval and certification (in accordance with §13 EG-FGV) Dedpfozd Tw Isx Aanewc 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted per customer request

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,500 kg, maximum load weight: 15,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,260 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Fliegl “V-Stream” frame Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy 20"-based arms for 7.15- and 7.45-meter swap bodies Note! Not suitable for 20" containers, or only possible if the container has a tunnel or opening at the front center approximately 200 mm long and 800 mm wide! Swivel frame with heavy-duty ball bearing swivel ring 2 wheel chocks with holders Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Half-shell fenders Rear mud flaps across the entire width *Trailer Coupling Device (Turntable) Towing fork with certified 40 mm tow eye Spring-loaded towing fork height adjustment *Axles + Suspension SAF disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system; color-coded lines for easy servicing. Air reservoir: 208 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Brake System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions *Wheels and Tires 385/65 R22.5" Manufacturer’s choice Steel rims, factory silver, ET 120 *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof connectors at the front, with connecting cable, 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted according to customer specifications Dedpfx Aszd U Uueanjwc Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: used, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,610 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Dodpez I Iy Aofx Aanewc

Condition: new, functionality: fully functional, machine/vehicle number: S1576, overall weight: 31,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, loading space length: 7,200 mm, loading space width: 2,250 mm, loading space height: 1,200 mm, loading space volume: 20 m³, suspension: hydraulics, tire size: 600/55-R26,5, tire condition: 100 %, wheelbase: 1,810 mm, maximum speed: 60 km/h, color: red, trailer brake: trailer braked, Year of construction: 2025, Description Chassis painted in Novagrau: Payload optimized with integrated vehicle frame. Gross weight 31,000 kg, rear axle load up to 20,000 kg, assumed fifth wheel load 11,000 kg, axle spacing approx. 1810 mm, fifth wheel height approx. 1400 mm. Manual landing gear. Heavy-duty 30 HP rear tipper body with front cylinder. Half-shell steel body made of Hardox 400, 6 mm; approx. 7200 mm x 2250 mm x 1200 mm; all-steel body primed, painted red. Hydraulic tailgate (requires one double-acting control circuit). 2-line compressed air braking system. 2 braked axles, rear axle steered with automatic locking. Standard drum brake axles. Dwodpfx Aoyik R Isansc Steel rims. 60 km/h version for Germany with TÜV data sheet (incl. outline marker lights, side marker lights). Hydraulic suspension. Hydraulically foldable underride protection. 24V lighting with 15-pin socket, without connection cable. Rear outline marker lights (white/red). Front position lights (white). Contour marking according to ECE R 048. Subject to prior sale! Information without guarantee!

Condition: used, machine/vehicle number: WFDFLT21802025375, empty load weight: 2,620 kg, maximum load weight: 15,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation! Swap Body Turntable Trailer – Specifications Chassis – Swap Body Turntable Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Removable guide rollers at the front and rear Additional 4 container twist locks with heavy-duty outriggers on 20 ft base, suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter fenders at the front and half fenders at the rear Spare wheel holder for 1 spare wheel including wheel fastening kit, basket design Drawbar Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment Axles & Suspension BPW disc brake axles Laser-measured axles/chassis alignment to reduce tyre wear and fuel consumption Air suspension Braking System Dual-line air brake system Colour-coded brake lines for easier servicing Air reservoir capacity: 208 litres Spring parking brake Two colour-coded front coupling heads with connecting lines to tractor unit WABCO EBS electronic braking system with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure ABS functionality Raise/lower valve with holding function in both raised and lowered positions Electrical System 24 V electrical system 4 × three-chamber rear lights 1 round reversing light 1 round rear fog light Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Additional LED work light at the rear, activated via reverse light Dwedpfxji Riz He Aanoc LED work light mounted centrally between the chassis beams at the front, illuminating to the rear, activated via reverse light Registration & Certification Country of registration: Germany DEKRA inspection and approval according to §13 EG-FGV Prepared for single-line licence plate holder ECE R48 contour marking with white reflective strips on the sides and red reflective strips at the rear Attention: The pictures shown are archive images. The vehicle may still be in operation!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,500 kg, maximum load weight: 29,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 9,830 mm, loading space width: 2,470 mm, loading space height: 1,750 mm, loading space volume: 41 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,340 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Further Information Chassis, Saddle, Tipper Fine-grained steel welded construction, lightweight design, saddle plate with 2 interchangeable kingpins Curved front end, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without thrust compensation 2 chock blocks with holder Underrun protection, foldable Half-shell mudguards Integrated mudguard holder, surface resistant to stone chipping With anti-splash flaps, only on the last axle 1 tarpaulin rod with holder 2 towing hooks at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Air suspension 1st axle automatic lift axle, including forced lowering and starting assist, activated 3 times by the brakes (starting assist is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy maintenance. Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Wheels and Tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Dump Body Aluminum box dump body made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, neatly welded, with a top profile that prevents spillage. Interior with ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Dwedpfx Aasi Ri Efsnec Greenline - tapered and aerodynamic dump body shape Membrane - Rear wall Rear wall pivotally mounted with double-joint hinge and with 2-part door division 1/2 to 1/2, at the top with swivel gantry, with one grain slide per door. Rear wall with rubber seal. Note! Heat-resistant up to max. 170°C! Bottom continuously 6 mm thick Standing platform with ladder, connecting plate for air/electricity and brake with large space for best possible operation. Roll-up cover on one side for placing in FR-right, with central locking in FR-left.