Walking floor

Fliegl SDS 390 Schubboden

Condition: used, maximum load weight: 35 kg, overall weight: 35,000 kg, loading space volume: 101 m³, tire size: 385/55R22,5, Year of construction: 2025, front tire size: 385/55R22,5, rear tire size: 385/55R22,5, operation weight: 35,000 kg, Tires (front): 385/55R22.5, Tires (rear): 385/55R22.5_____Disc brakes, Air suspension, ABS, EBS3-axle sliding floor semi-trailer, type SDS 390/101 X-tra Long- Total weight permissible / technical: 35000/39000 kg- Payload permissible / technical approx.: 27148/31148 kg- Aggregate load permissible / technical: 24000/27000 kg- Fifth wheel load permissible / technical: 11000/12000 kg- Tare weight (basic version) approx.: 7852 kg +/- manufacturing tolerance- Overall length approx.: 15350mm- Overall width max.: 2550mm- Overall height approx.: 4005mm- Interior length approx.: 14905mm- Interior width approx.: 2470mm- Interior height front approx.: 2655mm- Interior height rear approx.: 2853mm- Volume approx.: 101 cbm- Fifth wheel height approx.: 1130mm- Kingpin installation dimension approx.: 1640mm- Front corner dimension approx.: 2040mmChassis / Fifth Wheel:- Fine-grained steel welded construction in lightweight design, up to the support legs- Fifth wheel plate with replaceable 2" kingpin- X-tra Long with approx. 14905 mm interior length- 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without push-pull compensation- Extension ladder at the rear- Door lock on the side- 2 wheel chocks with holder- Aluminum side impact protection- Steel underrun protection with wide Fliegl mudguards- Folding mudflap for lighting unit- Quarter panel fenders- Rear impact protection- Aluminum ladder approx. 3550 mm, with holder on the side- Tarp pole with holder- 1 plastic toolbox, lockableAxles + Suspension:- BPW disc brake axles with 430 mm disc diameter- Air suspension- 1st axle automatic lift axle (circle driving with lifted 1st axle is not supported)Brake system:- 2-line pneumatic brake system- Color-coded line routing for easy servicing- 24 Volt EBS, electronic brake system with EBS socket at the front- with raise and lower valve- Vehicle - driving stability system- AAC Basic, automatic load relief axle acting on the last axle, as maneuvering aid, up to 20 km/h, can be switched off manually- Axle load detection via EBS-Canbus signal, for display on the display in the driver's cab, truck must be equipped accordinglyWheels and tires:- 385/55 R22.5- Steel rims, factory silverElectrical system:- 24 Volt, multi-chamber lights, yellow LED lighting on the sides- LED work lights on both sides- Additional LED work lights at the rearSB Hydraulics:- Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulics- Switching between forward/reverse operation is done electrically via radio remote control- Sliding floor power supply via parking lights- Recommended pump output:Flow rate: 110 ltr/minPressure: 250 barOil tank filling min: 100 ltrFloor:- Sliding floor with wear plate at the rear made of V2A sheet steel- Floor boards made of aluminum, 8 mm floor profile, ribbed design- End caps in aluminumBody:- Aluminum box body made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, rounded at the top. Ksdpfx Afjzdgzzjnelu

Condition: used, maximum load weight: 27,290 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,853 mm, Equipment: ABS, SDS390 101m³ X-TRA Long moving floor lift axle SAF* Deutscher Anhänger / German Semitrailer * 101m³ X-TRA Long model * SAF axles * Lift axle * Disc brakes / Discbrakes * Floor Sliding floor with rear wear plate made of V2A sheet metal, aluminum floor boards, 8 mm floor profile, ribbed design, aluminum end caps* Tires: 385/55 R 22.5 1st axle 9/9 mm, 2nd axle 12/10 mm, 3rd axle 11/9 mm * Empty weight: 7,710 kg * Permissible total weight: 35,000 kg * Payload / Working load: 27,290 kg * Air suspension * All data without guarantee * Further information and criteria on request. * Additional service Leistungen / Additional service * Umlackierungen, Nachrüstungen möglich / repainting, retrofitting possible * Kurzzeitkennzeichen / Zollkennzeichen / License plate * Überführung und Verschiffung möglich / Transfer and shipment possible * Hilfe bei Zoll und Export Dokumenten / Help with customs and export documents * Besorgung von COC und EUR Dokumenten / Procurement of COC and EUR documents * Seit 1991 auf dem Markt / Since 1991 on the market * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimum financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop / own workshop * Mówimy po polsku. * We speak english. Kjdpferwvl Tox Afnjlu * Goworim po russki * The repainting in your desired color is possible in our company at a reasonable price and in good quality. The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and have no opportunity or time to inspect and test a truck at our premises? No problem, you are welcome to appoint an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can rectify the defect quickly and effectively in our workshop. We can also deliver your new used truck anywhere in Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2015, Equipment: ABS, Fliegl walking floor * EZ 06.03.2015 * 3-axles * 92 cubic meters * 1st axle lift axle * SDS 390 * Empty weight: 7,200 kg * Tires: * 1st axle 385/55 R 22.5 v.l. 8 mm & v.r. 11 mm * 2nd axle 385/55 R 22.5 v.m.l. 10 mm & v.m.r. 11 mm * 3rd axle 385/55 R 22.5 h.l. 10 mm & h.r. 9 mm * German trailer / German semitrailer * 1 vehicle owner / 1 owner * All information without guarantee * Further information and criteria on additional services / Additional service * Repainting, retrofitting possible / repainting possible * Short-term license plate / customs license plate * Transfer and shipment possible * Help with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop Ksdpfervu Snox Afnelu * Mówimy po polsku. * We speak English. * Goworim po russki * The repainting in your desired color is possible in our house at a reasonable price and in good quality. * You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000211, empty load weight: 7,707 kg, maximum load weight: 27,293 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2023, loading space length: 15,030 mm, loading space width: 2,470 mm, loading space height: 2,655 mm, loading space volume: 101 m³, total length: 15,350 mm, total width: 2,550 mm, total height: 4,005 mm, suspension: air, tire size: 385/55 R22,5", color: silver, The images are archive photos; the vehicle may still be in use! Vehicle consists of: Chassis: Semi-trailer for freight forwarding Fine-grained steel welded construction in lightweight design up to the support legs, fifth wheel plate with replaceable 2" king pin 24 t, 2-speed landing gear, single-sided operation, with a straight bottom section Rear extension ladder Side door holders 2 wheel chocks with holders Aluminum side underrun protection Steel rear underrun protection with wide Fliegl mudflaps Foldable mudguard for the lighting assembly Quarter mudguards Rear impact protection Curtain pole with holder 1 plastic toolbox Axles & Suspension 3 BPW disc brake axles "Axles/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air brake system Color-coded line layout for easy service Spring-loaded parking brake Duomatic coupling EBS, Electronic Braking System with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability system AAC Basic, automatic lift axle acting on the rear axle as maneuvering aid, up to 20 km/h, manually switchable Axle load detection via EBS-CAN bus signal Wheels and tires 385/55 R22.5, make at manufacturer’s discretion Electrics 24 volts, multi-chamber lights, side yellow LED lighting Side yellow LED lighting linked to the indicator, 'flashing side marker lights' 2 white position lights at the front 2 white/red lane marker lights at the rear 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connecting cable SB Hydraulics Hydraulic cylinder with sliding mechanism built into the floor. 2-circuit hydraulic system. Forward/reverse switching is electric via wired remote control. Hydraulic operation via truck PTO Hydraulic connection with hose at the front wall and HDK screw connection Recommended pump performance: Klsdpfxjy Snmps Afneu Displacement: 110 l/min Pressure: 250 bar Minimum oil tank volume: 100 l Floor boards made of aluminum, 8 mm ribbed profile Aluminum box body from high-quality, wear-resistant material. Front and side walls made of aluminum hollow profiles, top all round welded with a wide special reinforcement profile from aluminum Sliding wall for improved unloading of cargo, with reinforced curtain flaps at the bottom. Rear wall made of aluminum hollow profiles, as two-leaf door, split 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 external locking bars, locked at the top and bottom. Rear wall with mechanical safety lock, operated at the rear on the left in the direction of travel. With swingable cross beam at the top. Standing platform with ladders on both sides 3 removable, swingable cross beams for tarpaulin support Roll tarp, can be stowed on one side, with 2 longitudinal tension straps, 3 side tensioning straps with ratchet Operating notices: Special permit required if overall train length exceeds 16,500 mm Country of registration / license plates: Germany With Dekra inspection and certificate (in accordance with §13 EC-FGV) Warning panel 'Long truck' Long truck overall assessment Driver instruction at the Triptis plant for up to 4 persons per truck combination Paintwork: Frame: DB 7350 Nova Grey Body: Natural aluminum Roll tarp: RAL 7035 light grey

Condition: new, machine/vehicle number: 562ca26c733cc91276e95b716, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Additional Information Chassis, Semi-Trailer, Freight Forwarding Fine-grain steel welded construction in lightweight design, up to the support legs, semi-trailer plate with 2 replaceable kingpins Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Extension ladder at the rear Door latch on the side 2 support wedges with holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps, foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with bracket 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist, operated 3x via the brakes (starting assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking System 2-line compressed air braking system, color-coded lines for easy maintenance Spring brake parking brake 2 keyed couplings at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - Driving Stability System Wheels and Tires 385/55 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side Kjdpji Riywofx Afnjlu 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole keyed sockets at the front, without connection cable Hydraulic System Hydraulic cylinder with sliding mechanism mounted in the floor. 2-circuit hydraulic system. Switching between forward/reverse operation electrically via remote control with cable. -Push floor power supply via side marker lights Operation hydraulically via truck auxiliary drive Hydraulic connection with hose to the front wall and HDK screw connection NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump performance: Flow rate: 110 l/min Pressure: 250 bar Minimum oil tank filling: 100 liters Push Floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design Container Aluminum box container made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded together at the top all around with a wide, special reinforcing profile made of aluminum, welded into a special frame at the bottom. Sliding wall for better discharge of the load, with reinforced tarpaulin flaps at the bottom. with rail cleaner Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 externally mounted swivel bar locks, locked at the top and bottom. Rear wall with mechanical safety locking, operated at the rear on the left side. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platform with ladder access on both sides in the direction of travel, le