Used Fliegl Zps Trailers for sale (349)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Hnodpfx Aozlkgcognep Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21801003760, empty load weight: 4,480 kg, maximum load weight: 13,520 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2014, total length: 10,020 mm, total width: 2,550 mm, tire size: 445/45 R19,5", color: grey, Platform Trailer – Specifications Chassis Hnodpfsni Udzjx Agnsp Fine-grain steel welded construction 1-speed landing leg at the front with straight foot and single-side operation on the right-hand side Wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Half fenders extending slightly beyond the main frame Rear impact buffers Drawbar Tandem trailer drawbar with certified 50 mm towing eye Transport version with under-mounted coupling drawbar Axles & Suspension BPW disc brake axles (manufacturer's choice) Air suspension with raise/lower valve Wheels & Tyres 445/45 R19.5 tyres (manufacturer's choice) Steel wheels, factory silver finish Braking System Dual-line air brake system Spring parking brake Front Duomatic connection with connecting line to the towing vehicle Haldex Electronic Braking System (EBS) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality Loading Platform Platform length: approx. 7,300 mm Phenolic plywood floor Front Wall Aluminium front wall, approx. 1,200 mm high Heavy-duty steel corner posts (volume design) Electrical System 24 V electrical system Multi-chamber lights Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Registration & Certification Country of registration: Germany DEKRA inspection and certification 24/7 service hotline Prepared for single-line licence plate holder ECE R48 contour markings with white reflective strips on the sides and red reflective strips at the rear

Condition: used, machine/vehicle number: WFDFLT21802025375, empty load weight: 2,620 kg, maximum load weight: 15,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation! Swap Body Turntable Trailer – Specifications Chassis – Swap Body Turntable Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Removable guide rollers at the front and rear Additional 4 container twist locks with heavy-duty outriggers on 20 ft base, suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter fenders at the front and half fenders at the rear Spare wheel holder for 1 spare wheel including wheel fastening kit, basket design Drawbar Drawbar with certified 40 mm towing eye Hjdpfxji Riz He Agnonp Spring-assisted drawbar height adjustment Axles & Suspension BPW disc brake axles Laser-measured axles/chassis alignment to reduce tyre wear and fuel consumption Air suspension Braking System Dual-line air brake system Colour-coded brake lines for easier servicing Air reservoir capacity: 208 litres Spring parking brake Two colour-coded front coupling heads with connecting lines to tractor unit WABCO EBS electronic braking system with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure ABS functionality Raise/lower valve with holding function in both raised and lowered positions Electrical System 24 V electrical system 4 × three-chamber rear lights 1 round reversing light 1 round rear fog light Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Additional LED work light at the rear, activated via reverse light LED work light mounted centrally between the chassis beams at the front, illuminating to the rear, activated via reverse light Registration & Certification Country of registration: Germany DEKRA inspection and approval according to §13 EG-FGV Prepared for single-line licence plate holder ECE R48 contour marking with white reflective strips on the sides and red reflective strips at the rear Attention: The pictures shown are archive images. The vehicle may still be in operation!

Condition: used, machine/vehicle number: WFDFLT21802026297, empty load weight: 2,872 kg, maximum load weight: 15,128 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation! Fliegl ZWP 180 Standard – Specifications Chassis – Swap Body Turntable Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Removable guide rollers at the front and rear Swap Guard – swap body positioning guide, mounted in front of and behind each container locking point 4 container twist locks with heavy-duty outriggers on 20 ft base, suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Wheel chocks with holders Aluminium side underrun protection Side underrun protection positioned further inwards for optimum clearance to swap body support legs Steel rear underrun protection Hedpfx Asi Ri Dzognonp Shortened underrun protection for optimum clearance to swap body support legs Protected installation of the lighting system Quarter fenders at the front and half fenders at the rear Without rear impact protection Spare wheel holder in basket design Plastic toolbox Drawbar Drawbar length: 2,200 mm Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment Axles & Suspension SAF disc brake axles with 430 mm brake discs Laser-measured axles/chassis alignment to reduce tyre wear and fuel consumption Air suspension Braking System Dual-line air brake system Colour-coded brake lines for easier servicing Air reservoir capacity: 208 litres Spring parking brake Two colour-coded front coupling heads with connecting lines to tractor unit EBS electronic braking system with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure ABS functionality Raise/lower valve with holding function in both raised and lowered positions Brake release function via push button on the vehicle next to the raise/lower valve, allowing brake release when coupled (EBS power supply must be ensured) Electrical System 24 V electrical system Multi-chamber lights Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Additional LED work light at the rear, activated via reverse light LED work light mounted centrally between the chassis beams at the front, illuminating to the rear, activated via reverse light Registration & Equipment Country of registration: Germany DEKRA inspection and approval according to §13 EG-FGV Prepared for single-line licence plate holder Warning board according to ECE R70 Foldable ADR warning board at the rear ECE R48 contour marking with white reflective strips on the sides and red reflective strips at the rear Attention: The pictures shown are archive images. The vehicle may still be in operation!

Condition: used, machine/vehicle number: WFDFLT21801006610, empty load weight: 2,620 kg, maximum load weight: 15,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2017, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Fliegl ZWP 180 Standard – 2-Axle Swap Body Trailer Weights and Dimensions: Gross vehicle weight: 18,000 kg Payload approx.: 15,380 kg Axle load: 18,000 kg Unladen weight (basic version): approx. 2,620 kg +/- manufacturing tolerance Overall length with 7,450 mm swap body: approx. 9,470 mm Overall width max.: 2,550 mm Frame height lowered: approx. 1,180 mm Frame height raised: approx. 1,380 mm Frame height driving position: approx. 1,260 mm Support height: approx. 1,220–1,320 mm Standard front stop to front locking point: approx. 800 mm Locking distance: 5,853 mm Coupling height: approx. 800 mm Drawbar length (adjusted): approx. 2,200 mm Free drawbar length from front stop for 7,450 mm swap body: approx. 1,970 mm Hnsdpfozlfwcjx Agnjp Support heights apply on level ground. Note: Steering through is not possible in lowered position. Chassis – Swap Body Turntable Trailer Fine-grain steel welded construction Quick-release connection for Anti-Ice system at the front Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container twist locks with heavy-duty outriggers on 20" base, suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter fenders at front and half fenders at rear Without rear impact protection Spare wheel holder for 1 spare wheel including wheel fastening kit Drawbar Drawbar with certified 50 mm towing eye Spring-assisted drawbar height adjustment Axles & Suspension Disc brake axles (manufacturer’s choice) with 430 mm brake discs Air suspension Braking System Dual-line air brake system Air reservoir capacity: 208 litres Spring parking brake Duomatic connection at front with connecting line to tractor unit EBS electronic braking system with front EBS connector and connecting cable Note: Trailer may only be operated with towing vehicles ensuring ABS functionality Raise/lower valve with holding function in raised and lowered position Brake pad wear indicator via EBS CAN bus signal (display in cab, truck preparation required) Axle load detection via EBS CAN bus signal (display in cab, truck preparation required, not a calibrated scale) Tyre pressure monitoring system via EBS (truck preparation required) Additional air connection front left at container cross member for Anti-Ice system Wheels & Tyres 385/65 R22.5 tyres Polished aluminium wheels, Speedline Electrical System 24 V electrical system LED multi-chamber rear lights Yellow LED side marker lights LED licence plate lighting Note: Certain towing vehicles may display incorrect fault messages although the system is functioning correctly. 2 LED white front position lights 2 LED red/white rear outline marker lights 1 × 15-pin front connector with connecting cable, including power supply for Anti-Ice system on swap body Additional rear LED work light, activated via reverse light Additional front LED work light centrally mounted between the chassis beams, illuminating to the rear, activated via reverse light Registration & Certification Country of registration: Germany DEKRA inspection and certification 24/7 service hotline Prepared for single-line licence plate holder ECE R48 contour marking with white reflective strips on sides and red reflective strips at rear Paint Finish Chassis: RAL 9011 Graphite Black

Condition: used, machine/vehicle number: WFDFLT21801005232, empty load weight: 2,650 kg, maximum load weight: 15,350 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 50 %, color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation. Fliegl ZWP 180 Standard – Specifications #Chassis – Swap Body Turntable Trailer Fine-grain steel welded chassis Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers Hjdpezldqhjfx Agnsnp 4 container twist locks with heavy-duty outriggers on a 20' base Suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Aluminium side underrun protection Steel rear underrun protection Quarter fenders at the front and half fenders at the rear Without rear impact protection #Drawbar Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles & Suspension SAF disc brake axles Air suspension #Braking System Dual-line air brake system Spring parking brake Two colour-coded front coupling heads with connecting lines to the tractor unit Electronic Braking System (EBS) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality Raise/lower valve with holding function in both raised and lowered positions #Wheels & Tyres 385/65 R22.5 tyres (manufacturer's choice) Steel wheels, factory silver finish #Electrical System 24 V electrical system Multi-chamber lighting Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 2 × 7-pin front connectors with connecting cables Additional LED work light at the rear, activated via the reverse light #Registration & Certification Approved for registration in Germany DEKRA inspection and certification 24/7 service hotline Prepared for single-line licence plate holder ECE R48 contour markings with white reflective tape on the sides and red reflective tape at the rear

Condition: used, machine/vehicle number: WFDFLT33802021791, empty load weight: 6,433 kg, maximum load weight: 28,567 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45 R19,5", color: black, Please note: The images shown are archive photos. The vehicle may still be in operation. ## Fliegl Mega Curtainsider Semi-Trailer Chassis: Lightweight fine-grain steel chassis, replaceable 2" kingpin, Load-Lock outer frame, 24 t JOST two-speed landing gear, rear access ladder, door retainers, aluminium side underrun protection, galvanised rear underrun protection, quarter mudguards, anti-spray mud flaps, Heavy Blocker rear impact protection with side roller buffers, heavy-duty pallet stop, spare wheel carrier, lockable toolbox with drawer, document box. Axles & Suspension: BPW drum brake axles (8-stud hubs), laser wheel alignment, mechanical hubodometer, air suspension, automatic lift axle with forced lowering and traction aid (activated by brake pedal or manual switch). Brakes: Dual-line air brake system, spring parking brake, WABCO EBS, lift/lowering valve. Raising the lift axle increases loading/overall height by approx. 50 mm. Tyres: 445/45 R19.5 (manufacturer's choice). Electrical: 24 V LED lighting, LED side markers, LED front position lights, LED rear outline lights, 2 × 7-pin and 1 × 15-pin front sockets. Floor: Approx. 30 mm plywood floor with Omega-reinforced joints, suitable for forklift axle loads up to 7,100 kg. Front Wall: 2,580 mm high, steel corner posts, curtain release system, internal steel impact protection, additional 1,250 mm plywood lining. Centre Posts: 3 pairs of full-length sliding posts with multiple locking positions. Side Slats: Aluminium or timber V-slats. Rear: Steel rear corner posts, double rear doors with internal locking bars, curtain tensioning system. Curtains: Reinforced curtains with welded horizontal and vertical straps, stainless steel buckles. Hnsdpjzlciijfx Agnsp Roof: Sliding roof, rear end lift, automotive L-roof rails, hydraulic lifting roof on both sides (+400 mm), rain gutter at rear. Certification: DEKRA approval, EN 12642 XL load securing certificate, VDI 2700 Sheet 12 beverage transport certification, ECE R70 rear warning plate.

Condition: used, machine/vehicle number: WFDFLT33502021621, empty load weight: 5,897 kg, maximum load weight: 29,103 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: green, Please note: The images shown are archive photos. The vehicle may still be in operation. #Chassis Fifth wheel with replaceable 2" kingpin Slightly angled outer frame with integrated Load-Lock profile for securing lashing straps 24-tonne two-speed landing gear with single-side operation, straight foot design, without load compensation Retractable rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Pallet storage box for 8 Euro pallets, mounted in front of the axle assembly (black lid) Galvanised steel rear underrun protection Quarter-shell mudguards in front of the first axle and behind each axle Anti-spray mud flaps behind each axle Heavy Blocker rear impact protection with cross beam and side roller buffers Heavy-duty pallet stop on both sides (approx. 15–20 mm high) with lashing points every 200 mm (Loading height reduced by approx. 20 mm.) Lockable plastic toolbox with drawer and storage shelf: 650 × 520 × 670 mm #Axles & Suspension SAF disc brake axles Laser wheel alignment for reduced tyre wear and fuel consumption TIS – Tyre Inflate System (automatic tyre pressure monitoring and inflation system) Air suspension Without lift axle #Braking System Dual-line compressed air braking system Spring parking brake Two non-interchangeable air couplings at the front (without connecting hoses) Electronic Braking System (EBS) Front EBS socket Raise & lower valve Trailer Stability Control System #Wheels & Tyres 385/55 R19.5 tyres Manufacturer's choice Steel wheels, factory silver finish #Electrical System 24 V electrical system Multi-chamber rear lights Yellow LED side marker lights Two white LED front position lights Two red/white rear outline marker lights 2 × 7-pin and 1 × 15-pin front sockets #Floor Approx. 30 mm plywood floor Omega-reinforced transverse joints Longitudinal steel cross members Suitable for forklift axle loads up to approx. 7,100 kg #Front Wall & Front Corner Posts Front wall height: approx. 2,580 mm Steel corner posts Internal steel impact protection at approx. 140 mm height #Sliding Centre Posts pairs of full-length sliding posts Four-way insert pockets Additional long lower pockets 3 selectable post positions #Side Slats Aluminium V-type insert slats #Rear Wall & Rear Corner Posts Steel rear corner posts extending to the underside of the roof Curtain tensioning with round tube and ratchet system Double rear portal doors with two internal locking bars per door #Curtain System Reinforced side curtains with welded horizontal and vertical straps Stainless steel curtain buckles Customer branding "Bring" on both side curtains and rear doors #Roof Sliding roof system opening from rear to front Rear end lift can be folded upwards L-shaped roof rails suitable for the automotive industry EcoLift lifting roof, adjustable by approx. 380 mm on both sides with gas strut assistance Hodpfozlcdgjx Agnonp Optimised rear rain gutter integrated into the rear roof bow above the doors #Approval & Certifications Country of registration: Germany EC type approval according to Directive 2007/46/EC Manufacturer's body strength certificate according to EN 12642 XL *(valid only when equipped with four rows of aluminium slats)* Additional DL 9.5 certification Heavy-duty pallet stop on both sides, approx. 25 mm high ECE R70 rear warning plate Folding "A" warning plate for waste transport Rear night parking sign

Condition: used, Year of construction: 2025, PROFESSIONAL LITTER SCOOP (0010) FLIEGL litter scoop Hsdozkwzqspfx Agnjnp (0020) Width 1850 (0030) EURO attachment

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 04/2015, loading space length: 12,480 mm, loading space width: 2,500 mm, loading space height: 2,550 mm, total length: 13,000 mm, total width: 2,600 mm, suspension: air, wheelbase: 8,600 mm, color: white, Year of construction: 2015, Equipment: ABS, tail-lift, = Additional Options and Accessories = - EBS - Rear doors - Lifting axle - Insulated - Refrigeration/freezer unit - LED work lights - Steering axle - Air suspension - SAF axles - Disc brakes - Central lubrication system = Notes = Fliegl Year of manufacture: 2015 Thermo King SLXE 200 -30 +30 4262 Diesel operating hours AS-1 Lifting axle AS-2 Steering axle Dautel loading platform 2000KG Automatic lubrication system SAF axles Storage box Internal dimensions: 12.48x250x255 NL Trailer APK/TUV = Further Information = Axle configuration Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lifting axle; Max. axle load: 9000 kg; Tire tread depth left: 30%; Tire tread depth right: 30% Rear axle 2: Max. axle load: 9000 kg; Steered; Tire tread depth left: 30%; Tire tread depth right: 30% Weights Unladen weight: 8,920 kg Payload: 21,080 kg GVW: 30,000 kg Functional Features Loading platform: Dautel DL 2000S, rear door, 2000 kg Cooling: 30 °C to 30 °C Body manufacturer: Thermo King SLXE 200 Cooling engine: Diesel (4262 operating hours) Condition Technical condition: very good Optical condition: very good Damage: none Identification Registration number: ON-24-SV = Company Information = Hsdjy Urhiepfx Agnenp Would you like to finance this vehicle? No problem. We can quickly arrange a favorable financing lease agreement for you with a term of 12, 24, 36, 48, or 60 months. You can find all photos and further information at [website address] or contact us directly.

Condition: used, machine/vehicle number: WFDFLT3240100xxxx, Year of construction: 2019, Please provide reference number upon request: 23046 Specifications: 2019 model Length: 998 cm Wheelbase: 136/136 cm Net weight: 4800 kg Max payload: 19,200 kg Owner has paid for the trailer Ready for delivery   Description: 2019 Fliegl 3 axle container trailer. Hodoy Elmtspfx Agnjnp The owner says he has gone over everything to make sure it is in good condition. Ready for delivery. Technical approved: Yes EU-approved until: 05.02.2027 Own weight: 4800 Total Weight: 19200 Model: 3 akslet container kjerre = More information = Please contact ATS Norway for more information

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902030381, empty load weight: 5,960 kg, maximum load weight: 29,040 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 03/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: black, The images are archive images; the vehicle may still be in use. Fine-grain steel welded construction, kingpin plate with replaceable 2" kingpin, outer frame slightly angled with "Load-Lock profile" for securing lashing straps, 24 tons. Two-stage support jacks, single-sided operation, with straight lower part, without thrust compensation. Note: Free support foot angle or free rear swivel radius approx. 1930 mm without supports, extension ladder at the rear, door latch on the side, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Rear impact protection, "blocker," transverse steel angle zinc-plated, as forklift protection and to protect the door hinges, pallet stop on both sides approx. 15-20 mm high, in bolted version, loading height reduced by approx. 15-20 mm. Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "axle/chassis laser-aligned" to reduce tire wear and fuel consumption, air suspension, without lift axle. Braking system: 2-line compressed air braking system, color-coded lines for easy servicing. Spring brake parking brake. 2 fail-safe coupling heads at the front, without connecting line, EBS manufacturer Haldex, electronic braking system with EBS socket at the front, without connecting cable, with raise and lower valve. Vehicle - driving stability system, brake pad wear indicator via EBS-CAN bus signal, for display on the dashboard in the cab, truck must be suitably pre-equipped, axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab, truck must be suitably pre-equipped, no truck installation (no calibrated scale). Hodpfx Agsy Tvwxsnenp Tire pressure monitoring system TPMS Haldex, via EBS, without truck installation (this must be possible in the truck). Electrical system: 24 volts, multi-chamber lights in LED with resistor, yellow LED lighting on the sides, license plate lighting in LED. 2 white position lights at the front, 2 white/red side marker lights at the rear, 1 x 15-pin socket at the front, without connecting cable, additional LED work lights at the rear, switched via reversing light. Floor: Sieve print plates approx. 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg. Front wall / front corner posts 2,580 mm high, corner posts steel in full profile, release mechanism for side tarpaulin on the front wall, "crash blocker," at the bottom inside at approx. 140 mm height with steel impact protection. Side supports: 2 pairs of sliding supports, adjustable over the entire length, with 4 insertion pockets and at the bottom with a long pocket. 2 pairs of support positions. Insertion slats: 5 rows of aluminum V-shaped insertion slats. Rear wall / rear corner posts Corner posts at the rear steel to the bottom edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet. Rear portal doors, 2-leaf with 2 internal swivel latch locks each. Tarpaulin: Tarpaulin, with welded-in horizontal and vertical straps, tensioning buckles made of stainless steel. Roof: Sliding tarpaulin, rear end lift that can be folded up, with tarpaulin that can be slid from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, roof non-elastic, minimal deflection of the roof beam during loading and unloading, anti-ice system, with 1 hose in the middle, with automatic forced ventilation via brake light, optimal rain strip at the r

Condition: used, machine/vehicle number: WFDFLT33902030001, empty load weight: 6,075 kg, maximum load weight: 32,925 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 3,940 mm, suspension: air, tire size: 435/50 R19,5", Please note: The images shown are archive photos. The vehicle may still be in operation. ## Chassis * "Preload" lightweight pre-tensioning in the front neck area * Fifth wheel plate with replaceable 2" kingpin Hsdpozcmmzsfx Agnjnp * Slightly angled outer frame, new design, with integrated Load-Lock profile for attaching tension straps * 24-tonne two-speed landing gear with single-side operation * Side door retainers * Wheel chocks with holders * Aluminium side underrun protection * Galvanised steel rear underrun protection * Quarter-shell mudguards in front of the first axle and behind each axle * Anti-spray mud flaps behind each axle * Rear impact protection * Pallet stop on both sides, approx. 15–20 mm high, bolted design *(loading height reduced by approx. 15–20 mm)* * Plastic toolbox with drawer and shelf: * Width: 650 mm * Height: 520 mm * Depth: 670 mm ## Axles & Suspension * SAF disc brake axles * Laser wheel alignment for reduced tyre wear and fuel consumption * Air suspension * First axle with automatic lift axle * Automatic forced lowering function and traction aid * Lift axle positioned below recommended driving height ## Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Two non-interchangeable air couplings at the front (without connecting hoses) * EBS (Electronic Braking System) * Front EBS socket without connecting cable * Lift and lowering valve Note: In combination with the lift axle, the driving height changes. When the lift axle is raised, the loading height and overall vehicle height increase by approx. 50 mm. ## Wheels & Tyres * 435/50 R19.5 tyres * Steel wheels ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Two white front position lights * Two white/red rear outline marker lights * 2 × 7-pin and 1 × 15-pin non-interchangeable sockets at the front (without connecting cables) ## Floor * Approx. 30 mm thick plywood floor panels * Mounted on longitudinal support beams * High point-load capacity for forklift axle loads up to max. 7,100 kg ## Front Wall & Front Corner Posts * Height: approx. 2,580 mm * Steel corner posts in volume version * Release device for side curtain at the front wall ## Sliding Posts / Centre Posts * 3 pairs of sliding posts, adjustable over the entire length * Four-way insertion pockets * Additional long lower pockets * 3 pairs of selectable post positions ## Insert Boards * 5 rows of aluminium insert boards * Additional Vario slats ## Rear Wall & Rear Corner Posts * Steel rear corner posts extending to the underside of the roof * Curtain attachment system with round tube and curtain tensioning ratchet ## Curtains * Curtains with welded horizontal and vertical reinforcement straps * Stainless steel tension buckles ## Roof System * Fliegl Blitz sliding roof system * Rear end lift can be raised * Roof can be opened/slid from rear to front * L-shaped roof rails suitable for automotive applications * Internal width between roof rails: approx. 2,490 mm * Curtain colour: white *(Sliding roof operation from the front without front running carriage)*

Condition: good (used), axle configuration: 3 axles, first registration: 04/2023, loading space length: 13,600 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,550 mm, total height: 4,100 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2023, Equipment: ABS, = Additional Options and Accessories = - EBS - Lifting roof = Notes = Number of axles: 3, Tare weight: 6075 kg, Gross vehicle weight: 38000 kg, Type of chassis: Full chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2023, Customs seal, Lifting roof, Sliding roof, Axle type: BPW = Further Information = General Information Cab: Day cab Registration number: KLEYN1 Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 2 mm; Tire tread depth right: 5 mm Axle 2: Tire tread depth left: 11 mm; Tire tread depth right: 10 mm Axle 3: Tire tread depth left: 5 mm; Tire tread depth right: 4 mm Weights Tare weight: 6,075 kg Payload: 31,925 kg GVW: 38,000 kg Functional Sliding roof: Yes Environmental Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none Financial Information Leasing price: €315 per month (standard, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing inventory of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing inventory • Recognizable quality Hedpfxozdc Tyj Agnenp • A good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry through our website. Ask directly about our European warranty package.

Condition: used, empty load weight: 8,200 kg, maximum load weight: 30,000 kg, first registration: 08/2009, tire size: 215/75/17,5, Year of construction: 2009, Internal No. 0002 Viewing strictly by prior appointment only - MOT valid until 12/27 - 40 km/h approval - 80 km/h possible - New air reservoir - New air bellows - New shock absorbers Hnodpfxoyy Th Uo Agnop Suspension: • 1st axle: Air suspension • 2nd axle: Air suspension • 3rd axle: Air suspension • 4th axle: Air suspension Brakes: • 1st axle: Drum brakes • 2nd axle: Drum brakes • 3rd axle: Drum brakes with spring-actuated parking brake • 4th axle: Drum brakes with spring-actuated parking brake Tyres: • 1st axle: Twin tyres • 2nd axle: Twin tyres • 3rd axle: Twin tyres • 4th axle: Twin tyres • Tyre size: 215/75/17.5 • Tread depth: 50% • Rim type: Steel Additional equipment: • Unladen weight: 8,180 kg • Payload: 21,820 kg • Loading area: 20.53 m² • Loading volume: 61.58 m³ • ABS • EBS • Lifting roof • Number of axles: 4 • Axle manufacturer: BPW • Spare wheel holder including spare wheel • Hydraulic loading ramps Internal cargo space dimensions (approx.): • Length: 8,050 mm • Width: 2,550 mm • Height: 3,000 mm Sale subject to prior sale, errors, and omissions excepted.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33001012559, empty load weight: 6,250 kg, maximum load weight: 17,750 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,620 mm, loading space width: 2,520 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 860 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: black, Fliegl 3-Axle Low Loader Trailer Chassis – Low Loader Trailer Heavy-duty welded steel chassis construction Turntable steering with heavy-duty ball-bearing slewing ring Folding rear support legs 2 wheel chocks with holders Aluminium side underrun protection Full-width rear spray flap (not compatible with forklift bracket) Semi-circular mudguards Anti-spray mudflaps on the 1st axle and behind the 2nd and 3rd axles Lockable plastic toolbox with shelf insert (620 × 360 × 440 mm, W × H × D), padlock not included Extendable outriggers for overall loading width up to 3,000 mm Central storage compartment for timber extension planks 70 mm timber extension planks for widening to 3,000 mm Lashing Equipment Heavy-duty lashing points specifically designed for low-loader applications 1 pair of recessed lashing cut-outs in the front gooseneck, each rated at 10 tonnes 4 pairs of lashing slots in the outer frame for lashing straps, each rated at 5 tonnes 7 pairs of recessed mushroom lashing points (top and side mounted), each rated at 10 tonnes 1 pair on the gooseneck 6 pairs in the low-bed section First lashing point positioned 250 mm from the front Last lashing point max. 250 mm from the rear Maximum spacing between lashing points: 1,100 mm 5 pairs of recessed lashing rings in the outer frame, each rated at 5 tonnes (convertible to stake pockets) 2 additional pairs of folding lashing rings, each rated at 10 tonnes 1 pair on the gooseneck 1 pair recessed behind the rear axle 1 pair of heavy-duty bolted lashing rings (JDT type), each rated at 6.7 tonnes, with reinforced flange plate and threaded counter support, mounted on the gooseneck Drawbar Drawbar with certified 40 mm towing eye Parking sockets for electrical, ABS and air connections integrated into the drawbar Axles & Suspension SAF drum brake axles Laser-aligned axles and suspension for reduced tyre wear and lower fuel consumption Air suspension with raise-and-lower valve Front and rear air suspension circuits operated independently Wheels & Tyres Hnsdpfx Ajzaznzsgnep 235/75 R17.5 Fulda tyres Twin wheel configuration 6 inner steel rims 6 polished aluminium outer rims Braking System Dual-line compressed air braking system Spring-loaded parking brake Trailer Info Centre displaying operating data including axle loads (not legally calibrated) and mileage Vehicle Stability Control System Axle load detection via EBS CAN bus for display in the truck dashboard (truck preparation required) Two non-interchangeable front coupling heads with connecting hoses to the towing vehicle EBS (Electronic Braking System) with front EBS connector and connecting cable Front gooseneck with steel chequer plate flooring Integrated storage box in the transition ramp area 70 mm larch timber decking behind the gooseneck Steel chequer plate flooring over the wheel arch section Rear loading ramp area with 70 mm larch timber decking Low-bed loading deck including rear incline: 6,500 mm Loading Ramps 2 heavy-duty steel loading ramps Foldable lower ramp locking system to prevent lateral movement Timber-covered ramp surface Spring-assisted lifting mechanism for easy handling

Condition: new, machine/vehicle number: 628cde0fe99cc2d3c8eaa8dd8, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Additional information Low-loader chassis Steel welded construction Turntable with heavy-duty ball bearing Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Splash guards at the rear, covering the entire width Partial fender, 1st axle with anti-splash guard, anti-splash guard behind the 2nd and 3rd axle 1 plastic toolbox with insert, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Extendable widening sections to 3,000 mm Storage compartment for timber planks in the center of the loading area Timber planks, 70 mm for widening to 3000 mm Tie-down points for low-loader (40 tie-down points) 1 pair of tie-down recesses in the longitudinal beam at the front, recessed in the outrigger, each 10 tons. 4 pairs of tie-down holes in the outer frame, each 5 tons (for attaching lashing straps) 7 pairs of tie-down eyes recessed on top and on the side of the outer frame, each 10 tons 1 x at the front on the outrigger 6 x in the low bed First tie-down point 250 mm from the front and last max. 250 mm from the rear, distance between tie-down points not greater than 1100 mm 5 pairs of pocket recesses in the outer frame, inside 70 x 40 mm (can be converted to 5-ton ring tie-down points, not included) 2 pairs of folding tie-down points additionally, each 10 tons 1 x on the outrigger (protrudes) 1 x behind the last axle, recessed in the floor Coupling device, low-loader turntable Drawbar with tested 40 mm drawbar eye Axles + Suspension Drum brake axles, as per manufacturer's choice Laser-measured axle/suspension to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Wheels and tires 235 / 75 R 17.5 As per manufacturer's choice Steel rims in twin configuration, factory silver Braking system 2-line pneumatic braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS connector at the front, with connection cable Manufacturer: Wabco or Knorr Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Outrigger at the front with steel/diamond plate covering Storage box recessed in the transition slope to the outrigger Then with 70 mm soft wood floor, in the wheel arch area steel/diamond plate covering Rear slope with 70 mm soft wood floor Low-loader platform including rear slope 6,500 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, can be shifted sideways Hsdpfei Ri Ddex Agnjnp Covered with wood With spring-loaded support Country of registration/signs Country of registration: Germany 24/7 service hotline Prepared for license plate holder, two lines Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning sign according to ECE - 70 Paint finish Frame hot-dip galvanized including passivation 15 years warranty against rust-through Drawbar galvanized or black, as per manufacturer's choice Ramps hot-dip galvanized Attention! These are archive images!

Condition: new, machine/vehicle number: d461243f559015adca5bb372c, overall weight: 24,000 kg, axle configuration: 3 axles, tire size: 235 / 75 r 17,5, Further information Low-bed trailer chassis Steel welded construction Turntable with robust ball bearing Hsdpfsi Ri Dlsx Agnjnp Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Splash flaps at the rear, covering the entire width Half-shell fenders on the 1st axle with anti-spray splash flaps, anti-spray splash flaps behind the 2nd and 3rd axles 1 plastic toolbox with insert, w=620/h=360/d=440 mm, lockable with a padlock Extendable widening sections to 3,000 mm Storage compartment for wooden planks in the center of the loading area Wooden planks, 70 mm for widening to 3,000 mm Lashing points for low-bed trailer (40 lashing possibilities) 1 pair of lashing points in the longitudinal beam at the front, recessed in the cranked section, each 10 tons 4 pairs of lashing holes in the outer frame, each 5 tons (for attaching lashing straps) 7 pairs of lashing eyes recessed at the top and side in the outer frame, each 10 tons 1 x at the front in the cranked section 6 x in the low-bed First lashing point 250 mm from the front and last max. 250 mm from the rear, distance between lashing points not greater than 1100 mm 5 pairs of pocket for securing beams recessed in the outer frame, inside 70 x 40 mm (convertible to 5 ton ring lashing points) 2 pairs of folding lashing points in addition, each 10 tons 1 x on the cranked section (protrudes) 1 x behind the last axle, recessed in the floor Coupling device for trailer turntable Drawbar with tested 40 mm towing eye Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (lever compensation) Wheels and Tires 235 / 75 R 17.5 at the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Manufacturer: Wabco, Knorr or Haldex Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole non-interchangeable plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking lights (light can be removed) 2 pairs of warning signs double LED illuminated and extendable to 3,000mm Floor Cranked section at the front with steel/diamond plate covering Storage box recessed in the sloping transition to the cranked section thereafter with 70 mm softwood floor, in the wheel arch area steel/diamond plate covering Rear sloping section with 70 mm softwood floor Low-bed surface including rear sloping section 6,500 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable covered with wood Hydraulically operated via tractor unit auxiliary drive with throttle, actuation on the left-hand side (FR) Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Country of Registration / Signs Country of Registration: Germany 24/7 service hotline prepared for license plate holder, two-line Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning sign according to ECE - 70 Painting Frame hot-dip galvanized including passivation 15 years warranty against rusting Drawbar galvanized or black, at the manufacturer's choice Ramps hot-dip galvanized Attention! These are archive images!

Condition: used, maximum load weight: 32,700 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2022, loading space length: 13,600 mm, loading space width: 2,480 mm, total width: 2,550 mm, Gross weight: 39,000 kg Unladen weight: 6,300 kg Payload: 32,700 kg Overall length: 13,850 mm Loading length: 13,650 mm Width: 2,550 mm Loading height: approx. 1,100 mm Further information - Internal height: approx. 2,600 mm - Internal length: approx. 13,650 mm - Internal width: approx. 2,480 mm - Tyres: 385/65R22.5 - SAF axles - Underrun protection - Rear forklift pocket - Air suspension Hedoywq E Sepfx Agnjnp - Last axle steering - "Blitz-Verdeck" sliding roof - Sliding rings - Insert slats

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22701003408, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 01/2015, next inspection (TÜV): 02/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. # 2-Axle Fliegl Mega Platform Semi-Trailer ## Weights & Dimensions * Gross Vehicle Weight (GVW): 27,000 kg * Payload (approx.): 22,200 kg * Axle load: 16,000 kg * Kingpin load: 11,000 kg * Unladen weight (approx.): 4,800 kg (± manufacturing tolerance) * Overall length: approx. 13,850 mm * Overall width: max. 2,550 mm * Overall height: approx. 2,245 mm * Platform length: approx. 13,650 mm * Platform width: approx. 2,480 mm * Fifth wheel height: approx. 950 mm * Kingpin setting: approx. 1,680 mm * Front corner radius: approx. 2,040 mm --- ## Chassis – Mega Platform Semi-Trailer * High-tensile fine-grain steel welded chassis construction * Fifth wheel plate with replaceable 2" king pin * 13 pairs of recessed lashing rings integrated into the outer frame, each rated at 2.5 tonnes * Outer frame with integrated Load-Lock profile for quick attachment of lashing straps * 24-tonne two-speed landing gear, single-side operation, straight foot design, without thrust compensation * Wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Quarter mudguards --- ## Axles & Suspension * 1st axle: SAF drum brake axle * 2nd axle: BPW drum brake axle * Air suspension --- ## Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front (without connecting hoses) * EBS (Electronic Braking System) with front EBS socket, without connecting cable * Integrated raise-and-lower valve * Vehicle Stability Control System Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. --- ## Wheels & Tyres * 385/55 R19.5 tyres (manufacturer's choice) * Steel rims, factory silver finish --- ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights, recessed as far as possible for maximum protection * 2 white front position lights * 2 white/red rear outline marker lights * 2 × 7-pin front sockets, without connecting cables --- ## Platform * Approx. 30 mm phenolic-coated plywood floor * Omega-reinforced cross joints * Longitudinal subframe supports for high point-load capacity * Suitable for forklift axle loads up to 7,100 kg Note: Minor floor distortion due to weather conditions is possible. --- ## Front Wall * Front wall, approx. 1,200 mm high * Heavy-duty steel corner posts in volume specification * Integrated inspection windows --- ## Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included * 24/7 service hotline * Prepared for single-line licence plate holder * Rear warning plate according to ECE R70 * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) --- ## Paint Finish * Chassis: RAL 3002 Carmine Red * Landing gear: black coated * Front wall: RAL 3002 Carmine Red --- Hodpfx Agjy Sk U Asnonp Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry.

Condition: used, empty load weight: 7,540 kg, maximum load weight: 25,460 kg, first registration: 04/2015, next inspection (TÜV): 07/2025, total length: -1 mm, total width: 25,500 mm, suspension: air, tire size: 385 / 65 R 22.5 / 10mm, front tire size: 385 / 65 R 22.5 / 10mm, operation weight: 33,000 kg,

Condition: used, empty load weight: 7,540 kg, maximum load weight: 25,460 kg, first registration: 04/2015, next inspection (TÜV): 11/2025, total width: 25,500 mm, suspension: air, tire size: 385 / 65 R 22.5 / 10mm, front tire size: 385 / 65 R 22.5 / 10mm, operation weight: 33,000 kg,

Condition: used, axle configuration: 2 axles, first registration: 12/2019, color: other, Year of construction: 2019, Please contact us for more information. Hnjdpfozhlqhsx Agnsp

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2014, loading space length: 13,660 mm, loading space width: 2,470 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 9,000 mm, color: other, Year of construction: 2014, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes - Lift Axle = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 40% Weights Empty weight: 5.880 kg Carrying capacity: 33.120 kg GVW: 39.000 kg Maintenance Hnsdpfx Aezhlpkegnop APK (MOT): tested until 03/2027 Identification Registration number: ON-68-FS

Condition: used, functionality: fully functional, color: red, trailer brake: trailer unbraked, Shunting locomotive / Shunter / Switching locomotive Hnsdpfxozix R Dj Agnop