Used Müller Trailer for sale (24,731)

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,380 mm, loading space width: 2,520 mm, Year of construction: 2026, * PT 30 Profile: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Air suspension with lift and lowering feature as well as RtR-valve * Smart-Board mounted on the trailer as an infotool (for axle load display – front and rear display separated) * Tire pressure monitoring with display functionality in the truck via EBS signal, no truck-side installation required * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packs at the front and rear * Front axle plastic quarter mudguards with splash protection * Rear axle straight galvanized steel plate skirts with splash protection * Reflective contour tape on the sides and rear * 15-pin power connector * LED lighting 12 / 24 V * Rear LED rotary beacon (removable) * 1,200 mm long drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated, mounted on the right side * Accessory box in the bogie frame with folding lid, 2 fixed container locks (directly after the bogie platform) * ROBOT welded anti-slip coating on the bogie platform steel plate (protruding welding seams) * Load securing package consisting of: 2 lashing eyes (13.4 t) front left & right on the front wall bracket, 1 pair each front & rear UVV lashing rings (13.4 t), and 3 pairs each side UVV lashing rings (10 t), swiveling and lowerable, loadable in all directions and recessed in the outer frame, 3 stake pockets each side with simultaneous 2 t lashing provision * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slope) * Widening planks stored in the center of the load floor * Hydraulic one-piece drive-on ramps approx. 3,000 x 720 mm * Mechanically adjustable sideways * 4-way control block for later retrofit of hydraulic ramp shift * Continuous excavator arm rest above the rear axle up to the end cross member (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6,400 daN in the excavator arm rest, laterally in the longitudinal frame * 2 galvanized steps on the bogie left & right * Profifix lashing rail in the longitudinal axis center, in flush area for lashing capability up to LC 3,000 daN * Chassis, bogie, folding outriggers, drop supports, and ramps hot-dip galvanized * Axles, slewing ring, air tank, and drawbar painted black * Load edge (loaded) approx. 910 mm +/- 20 mm with air suspension * New vehicle with manufacturer’s warranty Lsdpstplwijfx Aazork * Errors and prior sale excepted * Available from approx. CW 22/2026 * Sample images

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, * T 3: * ABS brake system * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle load equalizer at the rear * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages front & rear * VA closed plastic mudguards as well as HA straight galvanized steel skirts with splash protection * Reflective contour tape on the sides and rear * Folding cover (hot-dip galvanized) for the toolbox in the turntable platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm – black powder-coated – mounted laterally under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * LED beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Four stake pockets on each side (stakes not included), with lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and retractable * Loadable in all directions and integrated into the outer frame: 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear slope) * Widening planks stored under the loading area in a storage compartment * Excavator arm rest across the rear axle up to the rear cross beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings at the sides of the excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip and load-holding valves, hydraulic lateral ramp shift * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 l/min up to max. 140 l/min), dual-circuit hydraulics * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loading height when loaded approx. 860 mm +/- 30 mm with leveling unit * Chassis, turntable, folding outriggers, drop-down supports at the rear and drive-on ramps hot-dip galvanized Lrsdpfx Aaeq Dyv Iezok * Axles, springs, drawbar, air tanks etc. painted black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 19/2026

Condition: new, maximum load weight: 14,660 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 19.0: * Wabco EBS brake system * RDÜ tire monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10-ton BPW Eco axles * Parabolic springs -110 mm wide- with tandem equalizer * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at the front * Exterior folding supports at the rear * Lateral underrun protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * 50 mm softwood floor * Fixture in front of the bulkhead for optional retrofitting of container locks * Bolted smooth sheet steel front wall * Side walls made of steel sheet - trapezoidal profiled, foldable with drop-side spring assist * Steel rear wall, insertable between the ramps - bracket for storage inside at the front wall when not in use * Bolt-on rear stanchions * Perforated outer frame, approx. 45 degrees angled, with 2-ton lashing capacity every 480 mm * Optional installation of 3-ton retractable lashing rings every 600 mm * 1 x 10-ton lashing ring in each of the front and rear corners, various bores in the front and rear crossmembers for additional 1.2-ton lashing options * Profifix lashing rail longitudinally centered, for lashing capacity up to LC 3000 daN * One-piece mechanical grating ramps with spring assist for single-person operation, approx. 2,750 x 620 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized * Drop sides painted in RAL 9010 pure white * Optional painting of side panels in an RAL color for an extra charge * Axles, springs, air tank, flange eye, and landing gear painted in black * New vehicle with full manufacturer's warranty * Subject to errors and prior sale Lsdpfx Aajl Th Hwszork * Available approx. from week 21/2026 * Sample images

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Lateral underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel kits at front and rear * Front: closed plastic mudguards, rear: straight, galvanized steel skirts, each with spray protection * Reflective contour marking tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED tail lights * Removable revolving beacon at rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets each side (stakes not included), can also be used as lashing points Lredsl Thxdspfx Aazsk * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant folding and lowering lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) * Widening boards stored in the center of the loading area * Excavator stick trough over rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator stick trough) * Hydraulically operated one-piece access ramps (approx. 3,000 x 720 mm) * 4-section control valve for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shifting * Load area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and intermediate sale excepted * Available from week 18/2026

Condition: new, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,230 mm, loading space width: 2,480 mm, Year of construction: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck dashboard via EBS signal – no truck-side installation required * 15-pin electrical connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Attachments: * Aluminum air reservoir * Stainless steel toolbox, approx. 1,000 x 300 x 600 mm, mounted on the side * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame, 45° bent with hole pattern for securing equipment, lashing force per point 2,000 kg at a distance of 480 mm * Possible installation of 3,000 kg drop lashing brackets at approx. 600 mm interval – includes 12 pcs. 3,000 kg lashing brackets per side * 5 pockets per side for posts, 100 x 50 mm, in the outer frame – posts are not included in delivery * 30 mm phenolic plywood flooring ----Drum Supports: * 3 galvanized drum supports, secured via container locks, with side forklift pockets spaced 800 mm center/center (pocket width 185 mm) * Maximum drum diameter: 2,600 mm, maximum drum width: 1,650 mm * Clear distance between support arms approx. 1,775 mm, with cross brace * Max. drum weight per drum stand: 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 collar rings * 2 polyamide centering cones * 4 pcs. 3.2 t lashing eyes on the support arms for customer-provided securing of the drum against rotation and unwinding ----Loading Height: Lrjdox Nli Nspfx Aazok * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame and rear underrun protection hot-dip galvanized * Axles painted in black tone ----Info: * Technical upgrade to 30 t GVW possible * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Available from week 28 / 2026

Condition: new, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,230 mm, loading space width: 2,480 mm, Year of construction: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lifting and lowering facility ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye Lrodpfox Nlkaex Aazjk ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck dashboard via EBS signal (no truck-side installation required) * 15-pin power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General attachments: * Aluminium air tank * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix external frame, 45° angled, perforated for lashing devices, lashing capacity per lashing point 2,000 kg at a distance of 480 mm * Installation of 3,000 kg folding lashing rings at approx. 600 mm spacing possible - each side comes with 12 x 3,000 kg lashing rings supplied * Each side features 5 pockets for pipe stanchions 100 x 50 mm in the outer frame (pipe stanchions not included) * 30 mm phenolic resin-coated plywood floor ----Cable drum supports: * 3 galvanized cable drum supports, secured via container locks with side forklift pockets centre-to-centre 800 mm (pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross-brace * Max. drum weight per support: 6,000 kg * Without drive or drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 retaining collars * 2 centring cones made of polyamide * 4 x 3.2 t lashing eyes on the support arms to secure the drum against unintentional rotation and unwinding (provided by customer) ----Loading height: * approx. 1,040 mm loaded ----Paintwork/finish: * Chassis, turntable, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in black

Condition: new, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,230 mm, loading space width: 2,480 mm, Year of construction: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic brake system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering function ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck display via EBS signal - no truck-side installation required * 15-pin power connector * 2 additional LED reversing lights (activated by reverse gear) * LED lighting ----General attachments: * Aluminum air tank * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm Lsdpfex Nlkgox Aazjrk * Side underrun protection * Plastic quarter mudguards * Rear underrun guard ----Platform: * Zurr-fix external frame, 45° angled with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg with a spacing of 480 mm * Installation of 3,000 kg folding lashing brackets at approx. 600 mm intervals possible - each side is supplied with 12 pcs. 3,000 kg lashing brackets * Each side has 5 pockets for pipe stanchions 100 x 50 mm in the outer frame - stanchions are not included in the scope of delivery * 30 mm phenolic plywood floor ----Drum supports: * 3 galvanized drum supports, secured with container locks and side forklift pockets (center/center 800 mm, pocket width 185 mm) * Max. drum diameter 2,600 mm and max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with cross connection * Maximum drum weight per cable rack: 6,000 kg * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft 76 mm diameter with centering and rotatable ends * 2 collars * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading height: * Approx. 1,040 mm under load ----Paintwork: * Chassis, bogie, drawbar, outer frame, underrun guard hot-dip galvanized * Axles painted in black tone ----Information: * Technical upgrade to 30 t gross weight possible * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from calendar week 28/2026

Condition: new, maximum load weight: 14,620 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Disc brakes * 2 x 10 t BPW wide-track axles * Air suspension (automatic lowering when uncoupling the brake) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle * Plastic toolbox 450 x 470 mm mounted on the right side * Side net box 1,000 x 500 x 500 mm * Enclosed plastic mudguards front and rear * Enclosed side underrun protection suitable for advertising * Rear underrun protection * Plastic rear impact buffers * Rear hazardous goods sign * 15-pin electrical connector * LED tail lights * Roller bed length approx. 6,830 mm * Pneumatic 4-point clamping lock * Mechanically adjustable end stops (2 positions) front left and right on the running rails * 265/70 R 19.5 twin tires * Unladen weight 3,220 kg Lodpfxsv Nulze Aazjrk * --Technically permissible total weight of 20,000 kg-- * Approx. 1,130 mm ride height when loaded * Suitable for container lengths of 5,500 - 7,000 mm * Hot-dip galvanized chassis * Air reservoirs, axles, turntable and drawbar * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function including RtR valve ----Electrics / Lighting: Lrjdpfx Aaspk D I Aezjk * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12/24V * Removable LED beacon at the rear left ----General accessories: * Side underrun protection * Support legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted under the chassis on the right-hand side ----Lowbed platform: * Fifth wheel platform with 45° chamfered front corners and front-mounted tool box made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with foldable lid * 400 mm high foldable and removable aluminium drop sides (RAL 9010 pure white) on the side of the fifth wheel platform * Removable rear panel, 150 mm high * Rear slope on the fifth wheel platform to the lowbed approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate above the axles ----Widenings: * 8 x mechanical fold-out extensions for total width of 3 m (not on the rear slope; extension boards included with storage on the fifth wheel platform) * Mechanically adjustable warning board kits front and rear ----Load securing (Lasi package): * On the fifth wheel platform, 2 x 6.3 t lash rings each, and 3 x 5 t lashing bars on the side in the outer frame * On the side of the lowbed platform, 2 x 13.4 t lashing rings each, plus 4 x 10 t pivoting and lowerable lashing rings embedded in the outer frame * On the side, 2 x 6.4 t lashing eyes each, and 1 lashing ring at the rear in the excavator boom rest * 2 x container locks directly after the drop in the lowbed platform ----Excavator boom rest: * Continuous excavator boom rest from the end of the last rigid axle over the steering axle to the rear cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 x D = 270 mm ----Loading ramps: * Mechanical one-piece hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer retrofitting of hydraulic ramp shifting * The outer board of the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from 40 to 120 l/min) ----Loading dimensions: * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Painting: * Chassis, loading ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, support legs, air tanks painted black * Vehicle is fully hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample pictures may show equipment not included with the offered vehicle ----Delivery time: * Available from week 26/2026

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system as well as RtR (Raise-the-Roof) valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an info tool, with pressure sensors for total axle load display * 15-pin power plug * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Fittings: * Side underrun protection * Support winches at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under the chassis on the right side ----Lowbed Area: * Saddle platform with 45° chamfered front corners and front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm aluminium drop sides (RAL 9010 pure white) on the sides of the saddle platform, foldable and removable * Rear wall inserted, 150 mm high * Rear incline on the saddle platform to the lowbed, approx. 700 mm long * Saddle platform with 50 mm timber planks and lowbed platform with 60 mm timber planks * Tread plate above the axles ----Extensions: Ledsl Tnvgjpfx Aazjrk * 8 x mechanical fold-out extensions up to a total width of 3 m, not on the rear incline (extension planks available and stored on the saddle platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the saddle platform: 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing rods on each side of the external frame * On the lowbed platform: 2 x 13.4 t lashing rings on each side, as well as 4 x 10 t lashing rings, swingable and lowerable, embedded in the external frame * On each side: 2 x 6.4 t lashing eyes, and 1 lashing ring at the excavator stick recess at the rear * 2 x container locks directly after the step in the lowbed platform ----Excavator Stick Recess: * Excavator stick recess from the end of the last fixed axle, over the steering axle, up to the rear cross member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer installation of hydraulic ramp shifting * The outer board of the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach incline ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity from over 40 l/min up to 120 l/min) ----Load Dimensions: * Loading surface of the saddle platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach incline) ----Fifth Wheel Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, widening adapters hot-dip galvanized * Axles, support winches, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may show equipment not included in the offered vehicle ----Delivery Time: * Available from week

Condition: new, functionality: fully functional, empty load weight: 159 kg, maximum load weight: 591 kg, overall weight: 750 kg, axle configuration: 1 axle, Year of construction: 2026, Scope of delivery: 1x tiltable motorcycle trailer for two motorcycles, 750 kg Lrsdpfjylbktsx Aazsk Description: Special trailer designed for the transport of motorcycles, featuring a swiveling drawbar and a loading ramp located underneath the loading area. Support frame made from bent, galvanized steel profiles, bolted together with numerous lashing points for securing tie-down straps. Adjustable handle for securing the motorcycle wheel during transport. With the practical tilting drawbar, the trailer can be stored vertically to save space in your garage. This protects the trailer from weather exposure and also provides security against vandalism and theft. Technical data: - Tiltable - 13-pin connector - Connector holder - Adjustable handle - Plastic mudguards - Various lashing options - Ramp stored under the loading area with safety lock Gross weight: 750 kg Payload: 591 kg Unladen weight: 159 kg Overall width: 1,950 mm Overall length: 3,125 mm Overall height: 865 mm Loading area width: 1,550 mm Loading area length (with bracket): 2,300 mm Loading area length (without bracket): 2,050 mm Frame material: galvanized steel Intended use: Transport of motorcycles Jockey wheel: Yes Brakes: No Maximum speed: 80 km/h Tires: 155/70 R13 Channel dimensions: Width: 25 cm Length: 155 cm Approved for 100 km/h! Please observe current legal regulations/formulas regarding the towing vehicle including trailer. For self-collection, we can send the vehicle documents to you in advance free of charge!

Condition: new, functionality: fully functional, empty load weight: 602 kg, maximum load weight: 2,098 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,150 mm, tire size: 10, tire condition: 100 %, maximum speed: 100 km/h, Year of construction: 2026, Scope of delivery: 1x car transporter trailer with winch and tilting function, 2.7t Description: Car transporter trailer equipped with winch, tilting function, and loading ramps. The pre-installed winch, with a cable length of 12m, allows for convenient loading and transport of vehicles that are no longer operational. The tilt function combined with additional loading ramps enables vehicles to be driven onto the trailer at a low approach angle. This facilitates the loading of vehicles with low ground clearance. The ramps are adjustable and securely stored under the loading platform with a safety catch. Winch: Length: 12 meters Pulling force: 1135 kg / 2500 lb Technical specifications: - Tiltable - Braked Lsdpeylbipofx Aazork - Automatic jockey wheel - Plastic wheel chocks with holders - With winch - Plug holder - Welded frame Gross weight: 2700kg Plug type: 13-pin Unladen weight: 608kg Payload: 2092kg Overall length: 5556mm Overall width: 2150mm Overall height: 770mm Load area length: 4052mm Load area width: 2105mm Jockey wheel: Yes Brake: Yes Wheel chocks: Yes Shock absorbers: No (Optional: €199 surcharge for 100km/h upgrade) Rail dimensions: Width: 30 cm Length: 120 cm

Condition: new, functionality: fully functional, empty load weight: 602 kg, maximum load weight: 2,098 kg, overall weight: 2,700 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,150 mm, tire size: 10, Year of construction: 2026, Scope of delivery: 1x car transporter with cable winch and tipping function 2.7t Description: Car transport trailer with cable winch, tipping function and drive-on ramps. Thanks to the pre-installed cable winch with a length of 12 m, you can also easily load and transport cars that are no longer roadworthy. Thanks to the tipping function with additional drive-on ramps, the trailer can be driven onto at a low angle. This makes it easier to load vehicles with low suspension. Ramps are adjustable and securely stowed under the transport surface with a safety catch. Cable winch: Length: 12 meters Lrodpfx Aaexnzz Nozsk Pulling force: 1135 kg / 2500 lb Technical data: - tiltable - braked - Automatic support wheel - Plastic wheel chocks with holder - with cable winch - Plug holder - Welded frame Total weight: 2700kg Plug type: 13-pin Tare weight: 602kg Payload: 2098kg Overall length: 5550mm Overall width: 2040mm Overall height: 780mm Length of loading area: 4040mm Width of the loading area: 1900mm Support wheel: Yes Brake: Yes Wheel chocks: Yes Shock absorber: No (surcharge: 199,- Euro for 100km/h extension) Track dimensions: Width: 30 cm Length: 120 cm

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Reference number for inquiries: 11599 * BRAND NEW VEHICLE now in stock and available immediately in Alsdorf * Versatile use: construction, landscaping, agriculture, and forestry – can be used as a tipper or low-loader Müller-Mitteltal KA-TA-R 11.9 Tandem Low-loader Three-way Tipper Trailer with Ramps * Tyres: 385/55 R19.5 (4x), BPW Axles, Parabolic springs, Drum brakes * Tyre pressure monitoring * GVW: 11,900 kg, payload: 8,750 kg * EBS Multi-voltage system for towing vehicles with 12 and 24 Volt electrics (e.g., agricultural and forestry vehicles) * Side marker lights with indicator actuation * LED lighting system for 12+24 Volt with 1x 15-pin connection cable and 1 additional connection cable as standard, 12 Volt 13-pin version with blank sockets for both electric plugs Lsdpfoyhtwwox Aazork * Galvanized floor, 5m x 2.42m x 0.5m; side panels laser-welded, swinging, folding and removable, pre-configured for later retrofitting of side panel extensions * Lockable compartment under the tipping bridge for loading ramps * incl. aluminium ramps, 8t load capacity, 3.57m long, stored in ramp compartment under the tipping platform * Front wall hot-dip galvanized * 4 UVV lashing rings LC 5000daN front and rear + 8 lashing eyes LC 3000daN recessed and foldable in the tipper floor (centered) * Drawbar infinitely height-adjustable, hot-dip galvanized, 40mm towing eye * Net hooks * Bolted, galvanized rear stanchions * * We are an official Müller-Mitteltal dealer! Contact us for an offer! * e.g., €519 net per month for 60 months without down payment, zero final installment. Financing offered by our partner FM LeasingPartner ----Our business hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of business hours, appointments can be arranged by request. We speak German, English, Polish, and French. WhatsApp Leasing, financing, and trade-in possible----

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bump stops * Mechanical drop down stands at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide the roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stops at the front in the running rails Ledpfx Aajpk D Iiozerk * Load certificate according to DIN 30722-1 * Transportation of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pendulum-mounted stop ----Load securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning elements for positive and non-positive securing of the skips * 4 side lashing bars in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld beads as anti-slip surface on the approach ramp running rail * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tank painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible total weight of 27,000 kg possible * New vehicle, unregistered, with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from week 20/2026

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles Lredpjpk D Awjfx Aazsk * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bump stops * Mechanical drop down stands at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide the roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transportation of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pendulum-mounted stop ----Load securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning elements for positive and non-positive securing of the skips * 4 side lashing bars in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld beads as anti-slip surface on the approach ramp running rail * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tank painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible total weight of 27,000 kg possible * New vehicle, unregistered, with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from week 20/2026

Condition: new, maximum load weight: 10,360 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange Towing Eye: * Drawbar height adjustable by 300 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) with display capability in the truck via EBS signal, no truck-side installation required * LED lighting system * 15-pin power connector ----General Attachments: Lrodpfxendpn Ss Aazsk * Jost landing gear at the front * Externally mounted, hot-dip galvanized, folding rear supports * Plastic toolbox mounted on the front right exterior of the bulkhead * Lateral underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Pre-installed fittings for later mounting of 20" container locks front and rear * Bolted smooth sheet steel front wall * Trapezoidal profile steel sheet side walls, foldable with drop side spring assist * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * One 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowed from the rear in a compartment recessed under the loading area in the chassis ----Painting: * Hot-dip galvanized chassis, drawbar, front wall and rear wall * Complete vehicle hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Subject to alteration and prior sale ----Delivery Time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 10,360 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * GIGANT axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with display option in the truck via EBS signal—no truck-side installation required) * LED lighting system * 15-pin power connector Lrodpspk D Dqjfx Aazok ----General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox mounted on the front wall, right-hand side * Side underrun protection * Plastic quarter mudguards ----Lowbed platform: * 50 mm softwood floor * Preparation for subsequent installation of 20" container locks at the front and rear * Bolted front wall, smooth sheet steel * Drop sides made of trapezoidal-profile sheet steel, foldable with sideboard spring assist * Bolted, hot-dip galvanized rear stakes ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * One 6.3 t lashing point at each front and rear corner * Various holes in the front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles; storage compartment underneath the loading platform integrated in the chassis for rear access ----Paintwork: * Chassis, drawbar, front wall, and rear wall hot-dip galvanized * Entire vehicle hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 14,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * 19.5" disc brakes * Automatic braking when opening the cross-bracing units * 2 x 10 t BPW wide track axles * Air suspension (automatic lowering when brake is uncoupled) * Tire pressure monitoring with in-cab display via EBS signal—no truck-side installation required * Pneumatically lowerable drawbar, 1,800 mm long, with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Plastic toolbox, 858 x 500 x 500 mm, mounted right side * Container net storage box made of galvanized perforated sheet, 1,000 x 500 x 500 mm, side-mounted * Enclosed plastic mudguards front and rear * Closed side underrun protection (RAL 9010 pure white), suitable as advertising space * Rear underrun protection * Rear plastic impact buffers * Folding "A" warning plate Ljdpsl Tn U Rsfx Aazsrk * Hazardous goods sign with accompanying document pocket and reflective rear parking warning sign * 15-pin power connector * LED lighting system with protective cover * 2 LED reversing lights (activated by reverse gear) * Additional front loading with rear running rail lowering and removable stops * Roller recesses in the area of the turntable with mechanically adjustable stop angles (2 positions) at the front left and right on the running rails * Roller rail length approx. 6,830 mm * Pneumatic 4-position clamp lock * For transporting external roll containers according to DIN 30722 Part 1—DEKRA load securing certificate available * Loaded floor height approx. 1,130 mm * Chassis and locking components hot-dip galvanized * Air tanks, axles, turntable, and drawbar painted in black * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without first registration, includes manufacturer's warranty * Subject to errors and prior sale * Available approx. from calendar week 21/2026 * Sample images

Condition: used, mileage: 1,100 km, gearing type: other, color: white, overall weight: 32,000 kg, empty load weight: 6,600 kg, maximum load weight: 25,400 kg, tire size: 425/65R22,5, first registration: 03/2016, suspension: air, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, BPW axles, air-sprung, 1st axle liftable, ABS (anti-lock braking system), U-protection, supports Body: Liebherr concrete mixer type HTM 1004 approx. 10m³ 2x 10t BPW axles! Lrsdpji Rk Axefx Aazek Suitable hydraulics for engine power take-off on towing vehicle available at extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, empty load weight: 5,100 kg, maximum load weight: 14,900 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 02/1997, loading space length: 8,200 mm, loading space width: 2,500 mm, loading space height: 900 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, SAF axles, turntable, leaf spring suspension, lashing eyes, mechanical ramps, rear support, side aluminum undercarriage, twin tires. Construction: 2-axle low-loader trailer with mechanical ramps, 2x SAF axles, drum brakes! Loading height approx. 900mm! Ramp length approx. 2650mm! ACCESSORIES INFORMATION IS SUBJECT TO GUARANTEE. Subject to change, prior sale, and errors! Lrodpfx Aov R Hmajazek - .

Condition: used, empty load weight: 2,910 kg, maximum load weight: 7,590 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 09/2009, next inspection (TÜV): 04/2025, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underbody protection, front support, rear support, swing flaps. Lrjdpev S H Sfjfx Aazek Construction: Tandem 3-way tipping trailer with ramp shaft. Loading ramps available for an additional charge of €900.00 net! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! - .

Condition: used, empty load weight: 2,230 kg, maximum load weight: 3,770 kg, overall weight: 6,000 kg, axle configuration: 2 axles, first registration: 02/1984, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 500 mm, suspension: steel, tire size: 10.5-20, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, U-protection, front support, rear support, pendulum flaps, height-adjustable drawbar Body: 3-sided tipper trailer with towing jaw and brake connections (red, yellow) ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lsdpfxsuxd Rpe Aazsrk - .

Condition: used, empty load weight: 3,650 kg, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 07/2011, next inspection (TÜV): 08/2024, loading space length: 5,000 mm, loading space width: 2,430 mm, loading space height: 900 mm, suspension: air, tire size: 285/70R19.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, tandem, air-suspended, ABS (anti-lock braking system), flap, lashing eyes, U-protection, front support, rear support, pendulum flaps, height-adjustable drawbar Body: Tandem 3-sided tipper trailer with aluminum drop sides 2x Gigant axles, drum brakes! Drive-on ramps available for an extra charge of 990.00€ net! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Lrjdpfxjth Uavj Aazjk - .

Condition: used, empty load weight: 6,500 kg, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2008, next inspection (TÜV): 03/2024, loading space length: 8,000 mm, loading space width: 2,520 mm, loading space height: 910 mm, suspension: steel, tire size: 235/75R17.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, leaf suspension, 3-axle, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydr. ramps, rear support, aluminum side bumpers, twin tyres, storage box Superstructure: Hydr. ramps, can be widened to 3m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000mm! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Lrsdpfoqpgtmox Aazjk