Used Fliegl Roll-Off Trailers for sale (341)

Condition: used, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,610 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fodpjz I Iy Aofx Afdjpn

Condition: new, maximum load weight: 17,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,670 mm, loading space width: 2,500 mm, loading space height: 860 mm, total width: 2,520 mm, From ongoing production Total weight: 24,000kg/ 30,000kg Empty weight: 6,100kg Payload: 17,900kg/ 23,900kg Total length: 10,890mm Loading length: 8,670mm total, 2,520mm offset, 6,500mm loading bed Width: 2,520mm Loading height: 860mm Further information Fjdpsuytx Ssfx Afdepn Steel welded construction Turntable with strong ball bearing ring Foldable rear support Wheel chocks with holder Aluminum side impact protection Rear mud flaps across the entire width (not in conjunction with forklift bracket) Half-shell mudguard 1st axle with anti-spray mud flaps Anti-spray mud flaps behind 2nd and 3rd axles Plastic tool box Extendable extensions to 3,000mm Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3,000 mm Lashing eyes for low loader 1 pair of lashing cutouts in the longitudinal beam at the front on the offset, 10 tons each. 4 pairs of lashing holes in the outer frame of the crank, each with 5 tons (tension belt attachment) 7 pairs of lashing mushrooms embedded in the outer frame at the top and side, each with 10 tons 1 x at the front on the crank, 6 x in the low bed Pair of ring lashing eyes embedded in the outer frame, each with 5 tons (can be converted to stake pockets) Pair of additional folding lashing eyes, each with 10 tons 1 x on the crank 1 x embedded in the floor behind the last axle Trailer towing device, turntable Draw fork with tested 40 mm drawbar eye Draw fork height adjustment via spring Axles + suspension Drum brake axles, at the manufacturer's discretion "Axles/chassis laser-measured" Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17.5" at the manufacturer's choice steel rims in twin arrangement, factory silver brake system 2-line compressed air brake system spring-loaded parking brake 2 interchangeable coupling heads at the front, with connecting lines to the motor vehicle, 24 volt ABS and ALB, with ABS plug at the front, with connecting cable electrics 24 volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red lane keeping lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, LED rotating beacon with holder, switched via parking light (light removable) pair of warning signs with double LED lighting and extendable to 3,000mm floor front bend with steel/checker plate covering storage box embedded in the crossing slope to the bend then with approx. 70mm softwood floor, in the wheel arch area steel/checker plate covering rear bevel with 70mm softwood floor Low loading area including rear bevel 6,500mm Loading ramps Steel ramps 2,800mm long, 750mm wide, can be moved sideways Additional ramp lock foldable at the bottom (to prevent the ramps from slipping sideways, not in conjunction with lateral hydraulic ramp shifting) Covered with wood (tip area with steel/checker plate) Hydraulic via tractor auxiliary drive with throttle, actuation on the side in FR left Hydraulic connection with SVK plug NW 10/3, including connecting hose Paintwork Frame hot-dip galvanized including passivation Loading ramps hot-dip galvanized Plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 €/ net

Condition: used, maximum load weight: 7,900 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 03/2020, next inspection (TÜV): 04/2027, loading space length: 4,500 mm, loading space width: 2,430 mm, loading space height: 500 mm, loading space volume: 5 m³, total width: 2,550 mm, total height: 1,450 mm, Equipment: ABS, Chassis galvanized, drawbar with adjustable height, an integrated lockable compartment for loading ramps is located under the loading platform, aluminum loading ramps (L x W) 2900 x 350 mm, support jacks, 2 folding supports at the rear, ABS, EBS, GFA axle(s), drum brake system, 5 lashing eyes per side, leaf spring suspension, 1 storage compartment, the vehicle can be fitted with advertising stickers and/or lettering. SI87176 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle can be fitted with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. Fsdpfx Afoz Hr R Nedjpn We would be happy to prepare a financing or leasing offer for this item. Please contact us!

Condition: used, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 08/2026, total length: 7,350 mm, total width: 2,550 mm, total height: 2,300 mm, Year of construction: 2012, Equipment: ABS, * Air suspension * Disc brakes * BPW axles * Support on the drawbar * 50 mm eye * Spring-assisted side flaps Fpodpfx Afjzwym Nedon * and more.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,650 kg, maximum load weight: 9,850 kg, overall weight: 13,500 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,680 mm, suspension: steel, tire size: 285/70 R19,5", tire condition: 100 %, Year of construction: 2026, - Bespoke transport solution - Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and equipment are carried out individually to customer specification. #Chassis – centre-axle tipping trailer - Steel welded construction, continuous rear tipping shaft with 80 mm ball-type tipping bearing - Geared support leg at front - Foldable rear support - 2 wheel chocks with holder - Steel rear underrun protection - Mudflaps at rear, full width - Quarter-shell mudguards - Lockable storage compartment for loading ramps beneath the load bed - 1 plastic tool box with removable tray, w=620/h=360/d=440 mm, lockable with a padlock - Note: side board touches the storage box when folded down - Lockable storage compartment for loading ramps beneath the load bed - Drawgear for centre-axle trailer - Drawbar with approved 40 mm tow eye - Drawbar height-adjustable via spindle, max. adjustment range 300 mm #Axles & suspension - SAF drum brake axles - "Laser-aligned axles/running gear" – reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free rubber-steel bushings and mechanical axle-load equalisation (rocker equalisation) #Wheels & tyres - 285/70 R 19.5" - Manufacturer's choice - Steel rims, factory silver #Braking system - 2-line air braking system - Spring-loaded parking brake - 2 anti-mismatch coupling heads at front, with connecting lines to the towing vehicle - ABS and ALB, with ABS socket at front, with connecting cable - Caution: this trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! #Electrics - 24 V, multi-chamber lights, yellow LED lighting on the sides - 2 white position lights at front - 2 white/red outline marker lights at rear - 2 x 7-pin anti-mismatch plugs at front, with connecting cable #Hydraulics - Three-way tipping gear, hydraulic multi-stage telescopic ram with stroke limiter and safety cable - Low-pressure cylinder up to max. 170 bar, without restrictor valve; to be retrofitted on the truck if required - Hydraulically operated via the truck's PTO - Hydraulic connection with quick-release coupling, DN 10/3, incl. connecting hose #Tipping body - Sturdy tipping body with 4 mm steel sheet floor, steel side-board structure, continuous side walls, foldable and pivot-mounted with central locking at the bottom; rear corner posts, plug-in type; tailgate foldable and pivot-mounted, with central locking at the bottom - Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom - Side-board return springs - Platform width 2,420 mm - 5 pairs of lashing eyes in the floor, 5 t each #Operating notes - The stated gross vehicle weight is technically achievable; depending on the load, it may not be reached while observing the permissible axle, support and fifth-wheel loads #Country of registration/plates - Country of registration: Germany - With DEKRA inspection and certificate (in accordance with §13 EG-FGV) - 24/7 service hotline - Prepared for single-line number plate holder - Contour marking with reflective strips to ECE R 048, white on the sides and red at the rear #Paintwork - Frame hot-dip galvanised incl. passivation - "15-year warranty against corrosion perforation" - Side boards/platform painted in colour of choice - Bespoke transport solution Fedpfx Afszd D Scodopn

Condition: new, functionality: fully functional, overall weight: 16,000 kg, maximum load weight: 13,700 kg, empty load weight: 2,300 kg, loading space width: 2,480 mm, loading space length: 7,750 mm, loading space height: 3,000 mm, machine/vehicle number: Produktpalette, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Tandem Trailer Chassis Welded steel construction with a floor assembly approximately 152 mm high; load-bearing and torsionally rigid steel frame construction. Longitudinal beam floor construction with a load-resistant outer frame and guide tunnels spaced 600 mm apart; tunnels feature guides on top and sides, tunnel height approx. 45 mm; 4 x swap body corner fittings based on a 20-foot standard. 4 side-extending/folding parking feet with dual locking mechanism for a parking height of 970 mm, with support leg rest Side door stops Rear impact protection made of flat bar Pallet stops on both sides, approx. 20 mm high with perforated profile for securing straps; loading height is reduced by approx. 20 mm Floor Screen-printed panels approx. 27 mm thick, for high point load capacity, for forklift axle load up to max. 4,400 kg Front wall/corner stanchions Approx. 2,580 mm high, remainder covered with tarp; steel corner stanchions in full-size design; release mechanism for side tarp on front wall Inner front wall additionally lined with a 1,250 mm high screen-printed panel Fodpfx Afjkt Ni Uodspn Center stanchions 1 pair of sliding stanchions adjustable along the entire length, with 4-compartment pockets and a long pocket at the bottom. 1 pair of stanchion positions Slotting Slats 5 rows of wooden V-shaped slotting slats Rear wall/rear corner stanchions Rear steel corner stanchions extending to the bottom edge of the roof, tarpaulin attachment with round tube and tarpaulin tensioning ratchet Rear portal doors, double-leaf, each with 2 internal twist-lock latches Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps, reinforcements for stanchions Stainless steel tensioning fasteners Roof Sliding roof, rear end lift folds up, roof can be slid from rear to front, L-shaped roof rail for the automotive industry, interior width between roof rails approx. 2,490 mm, tarpaulin color: white EcoLift – lifting roof by approx. 380 mm, liftable on both sides, with gas spring assistance, Registration / Plates Country of registration: Germany Fliegl manufacturer’s certificate for body strength in accordance with EN 12642 XL, Fliegl manufacturer’s certificate for body strength in accordance with DL 9.5, pallet stops on both sides, approx. 20 mm high, loading height reduced by approx. 20 mm Fliegl manufacturer’s certificate for load securing in accordance with VDI 2700, Sheet 12 ff. Pallet stops on both sides, approx. 20 mm high; loading height is reduced by approx. 20 mm Paint Finish Frame Hot-dip galvanized, including passivation Front corner posts Hot-dip galvanized Front wall Aluminum Rear corner posts Hot-dip galvanized Rear wall White

Condition: used, overall weight: 25,000 kg, axle configuration: 2 axles, first registration: 06/2014, Equipment: ABS, Visit our website, where you will find our complete vehicle inventory with many more photos and information in multiple languages. SEL 7566 Fliegl SZS 270 German registration / single owner First registration: 24.06.2014 Technical gross weight (kg): 27,000 Permitted total weight (kg): 25,000 Curb weight (kg): 5,100 VIN: WFDFLT22701003772 TIRES AND AXLES: Tires: 205/65 R 17.5 Axle configuration: 2 SAF axles Air suspension Drum brakes BODY: Internal dimensions: Width (m): 2.48 Length (m): 9.21 + Side panel height (m): 0.58 VEHICLE DOCUMENTS: Registration certificate (Schein) Vehicle title (Brief) German vehicle approval form M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosnian) L. OBODYNSKA Ukrainian/Українська, Russian/Русский We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Although every effort has been made to ensure the accuracy of the information, we cannot be held liable for any errors or omissions. We kindly request that our customers consult the available photos. The specified dimensions are approximate values. Our vehicles are sold as-is, in their current condition. We invite customers to visit our facility to personally inspect the vehicle’s condition. Furthermore, we offer the possibility of a test drive. Please note that the batteries supplied with the vehicle are those currently installed. If the customer prefers new batteries, we are happy to provide pricing information. Fedpfex Ep Eyjx Afdopn

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,500 kg, maximum load weight: 15,500 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space width: 2,520 mm, loading space height: 890 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-Tailored Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. More Information Chassis Steel welded construction Turntable with heavy-duty ball bearing Foldable rear support 2 outrigger plates with holder Aluminum side impact protection Splash guards at the rear, covering the entire width Semi-elliptical fenders for 1st and 2nd axles with anti-spray splash guards behind each axle, anti-spray splash guards in front of and behind the 3rd and 4th axles Excavator arm recess starting above the rear axles and extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points, each 5 tons, in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope. 1 plastic toolbox with insert, w=620/h=360/d=440 mm, lockable with a padlock (lock not included). 1 storage box recessed into the gooseneck with a cover, W=720 mm / L=520 mm / D=170 mm Extendable widening sections to 3,000 mm Wooden planks, 70 mm, for widening to 3,000 mm Storage compartment for wooden planks under the loading area Lashing points for low-bed trailers (40 lashing options) 1 pair of lashing points on the gooseneck, each 5 tons 9 pairs of lashing eyes recessed on the top and side of the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed Fpodpfxei Ri A So Afdjn 6 pairs of lashing points in the outer frame of the low bed, each 5 tons (tie-down strap attachment) 3 pairs of folding lashing points, each 10 tons 1 x inside next to the main frame at the beginning of the low bed 1 x on the gooseneck (overhanging) 1 x behind the last axle, recessed into the floor Coupling device, trailer turntable Tow hitch with tested 50 mm drawbar eye, drawbar eye inclined 8°, D-value min. 160 kN Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization at the front and rear (rocker arm equalization) Wheels and Tires 235 / 75 R 17.5, according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at the front, with connecting cable Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel/diamond plate covering followed by 70 mm soft wood flooring, steel/diamond plate covering in the wheel arch area Rear slope with 70 mm soft wood flooring Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring-assisted support Country of Registration/Signs Country of Registration: Germany 24/7 service hotline prepared for license plate holder, two lines Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning sign according to ECE - 70 Paintwork Frame hot-dip galvanized including passivation, 15-year

Condition: new, maximum load weight: 8,780 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 950 mm, total width: 2,550 mm, Further information plus delivery/preparation from storage location 26639 Wiesmoor €1,280.00 / net Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing mount Front support leg with gearbox Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mud flaps Quarter shell fenders 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable Note! Sidewall touches the storage box when folded down. Lockable storage compartment for loading ramps underneath the loading area Central axle trailer drawbar arrangement Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, adjustment range max. 300 mm Axles/Suspension GFA drum brake axles "Axle / Chassis laser measured" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5" manufacturer's choice Factory silver steel rims Braking System 2-line air brake system Color-coded line routing for easy servicing Manual spindle-operated parking brake ABS and ALB, with ABS plug at front and connection cable Attention: The trailer may only be towed by tow vehicles that ensure the operation of the ABS system! 2 foolproof coupling heads at the front, with connection lines to the truck Electrics Fedpsy Dzk Ejfx Afdopn 24 Volt, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red lane control lights at rear 2 x 7-pin foolproof plugs at front, with connection cable Hydraulics Three-way tipper, hydraulic multi-piston press with lift limit and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, retrofit on truck. Hydraulic connection with SVK plug NW 10/3, including connecting hose Operated hydraulically via truck PTO Tipper Body Sturdy tipper body with 4 mm steel floor, steel sidewalls, sides continuous, foldable and hung on pivots with central locking on bottom. Rear corner posts insertable. Rear wall foldable and hung on pivots, with central locking on bottom. Body length approx. 5,000 mm, sidewalls with 6 bottom hinges. Sidewall return springs (not available with split sidewalls) Body width 2,420 mm 5 pairs of lashing rings in floor, each rated to 5 tons Operating Notes The stated gross vehicle weight is technically possible, but depending on the type of load, the total weight may not be achieved when adhering to permitted axle / support / saddle loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Outline marking with reflective strips according to ECE R 048, white on sides and red at rear Paintwork Frame hot-dip galvanized including passivation "15-year warranty against rust-through" Sidewall/body RAL 9005 deep black Optional: Drive-on ramps €1,280.00 / net

Condition: new, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 950 mm, total width: 2,550 mm, Further information plus pre-transport / provision ex warehouse location 26639 Wiesmoor €1,280.00 / net Chassis Central Axle Tipping Trailer Steel welded structure, continuous tipping shaft at the rear with 80 mm ball bearing Support leg with gear at the front Foldable rear support 2 wheel chocks with holders Steel underride guard Full-width rear mudflaps (not in combination with forklift mounting) Quarter-section mudguards 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable (lock not included) Note! The sideboard touches the storage box when folded down. Lockable compartment for loading ramps under the cargo bed Drawbar system for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable by spindle, max. adjustment range 300 mm Axles & Suspension GFA or BPW axles at manufacturer’s choice, with tapered roller bearings and S-cam brakes “Axle/chassis laser alignment” for reduced tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5" as per manufacturer’s choice Steel rims in factory silver Braking System 2-line compressed air braking system Color-coded lines for easy servicing Hand spindle parking brake 24 Volt ABS and ALB, ABS connector at the front, with connection cable Note: The trailer may only be towed by vehicles that ensure ABS functionality! 2 mistake-proof coupling heads at the front, with connection lines to the truck Electrics 12 to 24 Volts, multi-chamber LED lights, side yellow LED marker lights, license plate lighting in LED (Note! Certain towing vehicles may display diagnostic errors even if functionality is correct) 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin mistake-proof plugs at the front, with connection cable 1 additional LED work lamp at rear, activated by reverse light Hydraulics Three-way tipping system, hydraulic multi-piston press with lift limit and safety cable Low-pressure cylinder up to max. 170 bar, without restrictor. If required, this must be retrofitted to the truck (trucks with max. hydraulic pumping capacity of 55 l/min) Hydraulic connection with SVK plug NW 10/3, including connecting hose Operated hydraulically via truck PTO Tipper Platform Robust tipper platform with 4 mm steel floor, steel sides, continuous and foldable and swinging sideboards with central locking at the bottom. Removable corner posts at the rear. Drop-down and swinging tailgate, with central locking at the bottom. Platform length approx. 5,000 mm, sidewalls with 6 hinges at the bottom. Sideboard retracting springs (not available with foldable front wall) Platform width 2,420 mm 3 pairs of lashing eyes on floor, each rated for 5 t Operating Instructions The specified gross weight is technically possible. Depending on cargo, the gross weight may not be achievable while adhering to permitted axle, support, and kingpin loads. (Poor driving and trailing behavior can result from improper load distribution) Country of Registration / Plates Fodpfx Asy Dzliofdspn Registered in: Germany With Dekra inspection and certificate (according to §13 EG-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides and red at the rear Paintwork Frame hot-dip galvanized incl. passivation "15 years warranty against corrosion through rust" Sideboard/Platform in RAL

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,600 kg, maximum load weight: 24,400 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 5,900 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,290 mm, total width: 2,550 mm, total height: 860 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are customised to customer requirements. #Low Loader Drawbar Trailer Chassis Welded steel construction Turntable with heavy-duty ball race Folding rear support legs 2 wheel chocks with holders Half-shell mudguards on 1st axle Quarter mudguards behind 2nd and 3rd axles Side underrun protection Yellow side LED lights instead of reflectors Full-width rear mudflap (not in combination with forklift mounting) 1 lockable plastic toolbox, W 600/H 425/D 460 mm #Lashing Points Low Loader 1 pair of recessed 10 t lashing cut-outs in front gooseneck side members 7 pairs of recessed 10 t lashing points in top and side outer frame 1 on front gooseneck 5 in low bed 1 in rear bevel 12 pairs of 5 t lashing holes in outer frame (for load straps) 5 on gooseneck, 6 in low bed and 1 in rear bevel #Drawbar Equipment Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles + Suspension Drum brake axles, manufacturer's choice "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushes and mechanical axle load equaliser #Wheels and Tyres 235/75 R17.5 Manufacturer's choice Twin steel wheels, factory silver #Braking System Twin-line air brake system Spring parking brake 2 non-interchangeable front coupling heads with connecting lines to towing vehicle Connecting lines extended by approx. 60 cm Fpodpsznw U Esfx Afdsn Without ABS, with mechanical ALB, max. 60 km/h approval #Electrical System 12 V multi-chamber lights with yellow side LED lights Flashing side LED lights linked to indicators 2 front white position lights 2 rear white/red outline marker lights 1 x 7-pin 12 V front plug with connecting cable, extended by approx. 60 cm 1 removable LED beacon with bracket, switched via side lights 2 pairs of illuminated warning boards, extendable to 3,000 mm #Floor Front gooseneck with steel chequer plate Recessed storage box in transition to gooseneck Approx. 70 mm softwood floor, steel chequer plate in wheel arch area Rear bevel with 70 mm softwood floor Low loader deck incl. rear bevel: 5,900 mm #Loading Ramps Steel ramps, 3,000 mm long, 750 mm wide, laterally adjustable Timber-covered (steel chequer plate at ramp tips) Hydraulic operation via PTO with flow control, left-hand side operation in direction of travel Hydraulic connection with SVK plug NW 10/3 incl. connecting hose #Paint Finish Chassis painted DB 7350 Nova Grey "10 Jahre Gewährleistung gegen Durchrostung" Drawbar galvanised or black, manufacturer's choice Loading ramps hot-dip galvanised

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 8,600 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,480 mm, total length: 9,490 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Year of construction: 2026, Equipment: tail-lift, - Bespoke transport solution - Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are carried out individually to customer requirements. #Chassis, centre-axle trailer - Outer frame, slightly angled, new design with "Load-Lock-Profil" for lashing strap attachment - 2-speed landing leg, front - Plastic toolbox - Platform height 1080 mm - Drawbar coupling, centre-axle trailer - Drawbar with tested 40 mm drawbar eye, haulage version - Drawbar mechanically height-adjustable via threaded spindle, below floor level, max. adjustment range 200 mm - Drawbar mechanically length-adjustable from approx. 1950-2300 mm, lockable in approx. 50 mm increments, drawbar length set to approx. 2100 mm #Axles + suspension - SAF/BPW axles, manufacturer's choice - Axles/running gear laser-aligned, reducing tyre wear and fuel consumption - Air suspension #Braking system - 2-line air braking system - Spring-loaded parking brake - Duomatic coupling head, front, with connecting line to the towing vehicle - 24-volt EBS, electronic braking system with EBS connector, front, with connecting cable - With lifting & lowering valve - Vehicle driving stability system #Wheels and tyres - 4x 235/75 R17.5, manufacturer's choice - 4x steel rims, factory silver #Electrics - 24-volt multi-chamber lights, yellow LED lighting on the sides - 2 white position lights, front - 2 white/red outline marker lights, rear - 1x 15-pin plug, front, with connecting cable #Floor - Screen-printed plywood flooring, approx. 30 mm thick, for high point load capacity - Platform length approx. 7,300 mm #Front wall / front corner posts - Pass-through loading system with front barn doors, 2-leaf, each with 2 internal rod locks, steel corner posts, release mechanism for side curtain - Loading ramp flap, approx. 2,400 mm wide, split once, approx. 350 mm long, for resting on the tail lift, load capacity approx. 1,800 kg, incl. support for the tail lift (drawbar length then approx. 2100 mm; for a tail lift length of 1800 mm, the coupling set-back dimension from the truck must then be min. 20 to max. 240 mm). Note! Usable internal length is reduced by the loading ramp flap! - Side boards #Centre stanchions - 2 pairs of sliding stanchions, adjustable along the full length, with 4 insertion pockets each and a long pocket at the bottom - Insert slats - 5 rows of wooden insert slats (4 rows in combination with side boards) #Rear wall / rear corner posts - Rear corner posts, steel, up to the underside of the roof, tarpaulin attachment with round tube and tensioning ratchet - Rear barn doors, 2-leaf, each with 2 internal rod locks #Tarpaulin Fpsdpfx Aezcp E Tofdjn - Tarpaulin with welded-in horizontal and vertical straps - Tensioning buckles made of stainless steel - Customer lettering possible on side curtains and rear doors #Roof - Sliding roof cover, rear end bow lifts up, cover slides from rear to front, tarpaulin colour: white - Optimised rain strip at the rear, at the top of the end bow, above the doors #Country of registration / plates - Germany - With DEKRA inspection and certification (in accordance with §13 EC-FGV) - Fliegl manufacturer's certificate for body strength to EN 12642 XL - Prepared for single-line number plate holder - Reflective strips: white, continuous along the bottom of the side curtains and at the top corners - Reflective strips: red, all around the rear doors - Bespoke transport solution

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 13,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 11,400 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further information Chassis Steel welded construction, with slight preload in the center, turntable with robust ball bearing race, support wedges with holder, quarter-shell fenders in front of and behind each axle. Tie-down points, low-bed trailer: above the front axle: 2 pairs of ring tie-down points, each 5 tons, at the front on the outrigger low-bed: 4 pairs of tie-down points, each 6 tons, on the sides in the low-bed 5 pairs of tie-down points, each 5 tons, between the longitudinal beams Tow hitch, trailer turntable Tow fork with tested 40 mm drawbar eye, mechanically adjustable in length by 6 x 100 mm and lockable (Tow fork length 1,700 - 2,300 mm) Axles + Suspension BPW drum brake axles, each 10 tons axle load, spring plates. Axle endurance brake test for 105 km/h, rear axle can be manually removed. Fpsdpfei Ri N Ajx Afdjn Air suspension with raising & lowering valve Wheels and Tires 235 / 75 R 17.5, from leading manufacturers, steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, with connecting lines to the towing vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, rotating beacon with holder, switched via parking lights (light can be removed), 2 pairs of warning signs, double LED illuminated and extendable to 3,300 mm, removable with plug, 2 x 7-pole tamper-proof plugs at the front, with connecting cable, 1 x 7-pole agricultural plug, voltage converter 12/24 Volt (only for electrical system, not for ABS/EBS) Floor Steel/diamond plate floor on the outrigger, perforated sheet covering between the longitudinal and transverse beams. Axle cover is not designed to be driven over, widening to 3,000 or 3,300 mm is possible. Operating instructions Note! A special permit is required for a 10,000 kg axle load. The permit must be applied for separately in each federal state; the legislator does not have to give a guarantee for 20 tons GVW. Customer risk. A special permit is required if the overall length of the train exceeds 18,750 mm. Observe country-specific registration regulations. The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. Observe the BO circle!!! Registration / Signs Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG - FGV), prepared for single-row license plate holder, warning sign according to ECE - 70, contour marking with reflective strips according to ECE R 048 Painting Frame at the front hot-dip galvanized incl. passivation, frame at the rear RAL 9006 silver, tow fork KTL black Note: Archive images!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22001007597, empty load weight: 6,200 kg, maximum load weight: 11,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2018, loading space height: 200 mm, total length: 11,600 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: red, Equipment: center pivot plate, Archive images! Chassis: Steel welded construction, double-curved with low-bed at the front and rear of the axle assembly, low-bed inclined for easy access, turntable with robust ball bearing race, foldable rear support, shims, side impact protection, quarter-panel fenders Lashing points: above the front axle: 2 pairs of ring lashing points, each 5 tons, at the front on the low-bed / rear axle: 6 pairs of lashing points on the side in the low-bed, each 8 tons. 6 pairs of lashing points, each 5 tons, between the longitudinal beams, a pair of stake pockets embedded in the outer frame, inner dimensions 70 x 40 mm, or instead of stake pockets, 5-ton ring lashing points embedded in the floor. Drawbar: tested 40 mm drawbar eye Axles: BPW drum brake axles Braking system: 2-line pneumatic braking system, spring-loaded parking brake, 2 non-interchangeable coupling heads at the front Electrical system: 24 volts, multi-chamber lights, yellow side lights, 2 white position lights at the front Fpodpoi Ri N Ujfx Afdjn 2 white/red marker lights at the rear, rotating beacon with bracket, pair of illuminated and extendable warning signs up to 3,000 mm, 2 x 7-pole non-interchangeable plugs at the front Floor: front curve with steel/diamond plate surface, storage compartment embedded in the ramp incline, driving area and in the middle between the beams with steel/diamond plate surface, rear incline with 70 mm softwood floor, low-bed platform including rear incline 5900 mm Ramps: attachment rail for aluminum ramps over the entire width, as a U-profile over the entire width Pair of aluminum ramps 800 mm long, approx. 400 mm wide, load capacity per pair 14,000 kg, Storage compartment for ramps between the beams Approval: contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear.

Condition: used, empty load weight: 7,950 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2013, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,850 mm, loading space volume: 95 m³, tire size: 385/55 R22,5, wheelbase: 1,310 mm, color: black, Equipment: ABS, Disc brake EBS Payload 27,050 kg Fodjuiyvyepfx Afdspn Air-lift suspension Roll-up tarpaulin Platform SAF axles Alcoa aluminum rims Lifting and lowering device Lashing rings Errors excepted

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 34,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end, patented 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation Wedge supports + holder Under-run protection, foldable Semi-shell fenders Integrated fender holder, surface repels stones Towing hook at the rear Axles + Suspension SAF disc brake axles Axle/suspension laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist, activated by 3x braking (starting assist functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Wheels & Tires 385/65R22.5, manufacturer's choice Polished aluminum rim, manufacturer's choice Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin socket at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw-on fitting, fixed part, NW 48 mm Actuation hydraulically via truck auxiliary drive Tippers Aluminum box tipper, sloping front wall, 5 mm thick, with external side walls made of 30 mm hollow profile, cleanly welded, with upper edge profile that prevents spillage of bulk goods. Interior with access ladder on the front wall Shovel and broom holder on the outside of the front wall Greenline - conical and aerodynamic tipper body shape Membrane - rear wall Fedpfx Aoi Ri Idofdepn Rear wall as a swing-open flap with double-joint hinge, externally mounted with 2-fold hook locking. Rear wall with rubber seal Note! Heat-resistant up to max. 170°C! Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel and rolled gravel with a maximum grain size of up to 20 mm! All other transported goods are excluded from the warranty! Standing platform with access ladder, connecting plate for air/electricity and brake with large space for the best possible operation. Roll tarp, single-sided for storing on the right-hand side (when facing forward), with central locking on the left-hand side (when facing forward) Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to protect against rust The specified total weight is technically possible, but depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) Country of registration / Signs Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline pre

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,900 kg, maximum load weight: 20,100 kg, overall weight: 24,000 kg, axle configuration: 3 axles, total length: 9,200 mm, total width: 2,550 mm, total height: 1,180 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example only. Production and equipment are customized according to customer specifications. # Chassis – Turntable Swap Body Trailer Heavy-duty fine-grain steel welded construction Adjustable and foldable front stop 2 pairs of removable guide rollers (front and rear) 4 container twist locks with reinforced outriggers on a 20" base for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball-bearing ring 2 wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Half-shell mudguards (front and rear) 2 lockable stainless steel toolboxes (600 × 400 × 500 mm) with polished doors 1 pair of double LED illuminated rear warning panels, extendable to 3,000 mm Electrical connector prepared for customer-installed front warning panels # Drawbar Drawbar with certified 40 mm towing eye Mechanically adjustable drawbar length (6 × 100 mm positions), approx. 1,900–2,500 mm Spring-assisted drawbar height adjustment # Axles + Suspension BPW disc brake axles with 430 mm brake discs Laser-measured axle/chassis alignment for reduced tyre wear and fuel consumption Air suspension with raise/lower valve # Wheels and Tyres 385/55 R22.5 tyres (manufacturer's choice) Factory silver steel rims # Brake System Dual-line compressed air braking system Spring parking brake 2 non-interchangeable air couplings with connecting lines to the towing vehicle Electronic Braking System (EBS) with front connector and connecting cable Note: Trailer may only be operated with towing vehicles that ensure full ABS functionality. # Electrical System 24 V electrical system Multi-chamber lighting Yellow LED side marker lights 2 white front position lights 2 white/red rear outline marker lights Removable rotating beacon 1 LED rear work light, activated via reverse gear 2 LED side work lights (left and right), activated via reverse gear 1 × 15-pin front connector with connecting cable # Registration Prepared for registration in Germany DEKRA approval and certificate according to §13 EC-FGV 24/7 service hotline Prepared for single-line number plate holder ECE R48 reflective contour markings (white sides, red rear) # Finish Frame hot-dip galvanized with passivation, including 15-year anti-corrosion warranty Drawbar KTL-coated in black Please note: Archive photos shown – actual vehicle may differ. Fjdpjzndmzsfx Afdspn

Condition: new, empty load weight: 4,110 kg, maximum load weight: 10,290 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 900 mm, suspension: steel, tire size: 385/55R19.5, color: orange, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, SAF axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underrun protection, front support legs, rear support legs, swing-out tailgates, height-adjustable drawbar, removable side panels. Fpjdpfx Aszvzgbofdon Superstructure: with raised side panels, steel side panels that can be folded down and are spring-supported, like new condition! 2x SAF axles, drum brakes, ramp recess, R-wheel available for an additional charge of €300, and for ramps €1,000.00, loading height 1.12 m, galvanized frame, new vehicle from stock with day registration on 07/04/2023! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: new, maximum load weight: 34,310 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Vehicle / Body: Trailer, container chassis, semi-trailer Unladen weight: 3,690 kg Overall length: 13,500 mm Width: 2,520 mm Saddle height approx.: 1,120 mm Further information: - 3-axle - Frame hot-dip galvanized including passivation - 1 x 45 ft with long gooseneck tunnel and angled front corners - 24-ton, 2-speed landing gear, single-sided operation Fpjdpfx Afok N Acujden - Aluminum side impact protection, galvanized steel underrun protection, extendable underrun protection for 45 ft containers - Plastic toolbox - Air suspension - 1st axle: automatic lift axle - Tires: 385/55 R22.5 - 2x 7-pin and 1x 15-pin sockets at the front From current production, delivery time approx. 3-4 weeks.

Condition: new, maximum load weight: 23,920 kg, overall weight: 30,000 kg, axle configuration: 3 axles, NEW VEHICLE Fliegl 3 axle low loader type DTS 300, hot-dip galvanized Total weight 24,000 kg / 30,000 kg Payload 17,920 kg / 23,920 kg Empty weight 6,080 kg Total length 10,900 mm Loading length 8,680 mm Loading bed 6,500 mm including 900 mm approach slope Parabolic suspension Long ramps 2,800 mm with hydraulic operation Wider widths to 3,000 mm with warning signs and rotating beacon Large lashing package with 5.0 and 10.0 ton lashing points 5 pairs of stake pockets Fedpoxb Nmyjfx Afdepn Towing eye 40 mm Plus pre-freight / provision from the Wiesmoor storage location 1,280.00 €/ Net Rent-to-own offer: term 48 months, residual value 40%, down payment only VAT. Monthly rate: EUR 500.00

Condition: used, axle configuration: 3 axles, first registration: 12/2019, Fliegl light container chassis + Singamas tank with measuring device, SAF lift axle Everything at a glance: · First registration: 30.12.2019 · Year of manufacture: 2019 · Color: Red · Tare weight: 3,580 kg · Tires: 385/65 R 22.5 · Note: 1 unit available immediately Special equipment: · Light container chassis for: 1x20 ft container in the center + 1x 30 ft container at the rear · SAF axles · Lift axle · 2 pcs. plastic hose pipes · ADR plate · EBS · ABS · Outline marking · 1 set of wheel chocks · Aluminum side impact protection · 1x15-pole electrical connection. Singamas 26-liter tank · DEZIDATA measuring device · Stainless steel box Standard equipment: · 3-axle · Disc brakes 430mm, lift and lower valve Errors, typos and prior sale excepted. The seller reserves the right to withdraw from the sale. Copyright: All texts, images and videos in this advertisement are subject to copyright by STARENT Truck & Trailer GmbH. Use, reproduction or distribution – even in excerpt – is not permitted without express written consent. _____ Internal number for inquiries: TR26283 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Contact for sales: Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: WhatsApp t: @: Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / WhatsApp t: -104 @: Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / WhatsApp t: -123 Fjdpfx Afez N N Ncedopn @: We speak 13 languages. Probably yours too. Contact us! Homepage: / Facebook: / Instagram: / Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks and vans. Contact for purchasing: Michael Doblhofer (German, English) p: WhatsApp t: -102 @:

Condition: used, axle configuration: 3 axles, first registration: 06/2026, Equipment: ABS, Fliegl Container Chassis ADR, 1x20/2x20/1x30/1x40/1x45 Highcube Gooseneck, fully galvanized frame, BPW axles, lift axle FOR RENT Everything at a glance: · First registration: 30.06.2026 (day registration) · Year of manufacture: 2026 · Color: Silver (fully galvanized) · Tare weight: 4,980 kg · Tires: 385/55 R 22.5 · Note: Available immediately, multiple units Fjdjz N N Npepfx Afdopn Special equipment: · Container chassis gooseneck for: 1x20 / 2x20 / 1x30 / 1x40 / 1x45 / Highcube containers · ADR: EX1, EX2 and EX3 · Front and rear extension · FULLY GALVANIZED · Height adjustment at the rear and foldable center supports for containers without a tunnel · Container guide at the front, pluggable and removable · Plug adapter for front locking · Retractable underrun protection for 25-foot containers · BPW axles · Lift axle (including forced lowering and including assistance for maneuvering, activated by braking 3 times) · EBS · ABS · Axle load recognition · Rear and brake lights in LED · 2x7 + 1x15-pole electrical connections · Contour marking · 2 pieces of chocks · Aluminum side impact protection · Spare wheel holder · Toolbox · Document box Standard equipment: · 3-axle · Disc brakes 430mm, lifting and lowering valve Errors, typing errors and prior sale are reserved. The seller reserves the right to withdraw from the sale. Copyright: All texts, images and videos in this advertisement are subject to the copyright of STARENT Truck & Trailer GmbH. Use, reproduction or distribution – even in excerpt – is not permitted without express written consent. _____ Internal number for inquiries: TR26287 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Contact persons Sales: Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: WhatsApp t: @: Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / WhatsApp t: -104 @: Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / WhatsApp t: -123 @: We speak 13 languages. Probably yours too. Contact us! Homepage: / Facebook: / Instagram: / Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks and vans. Contact persons Purchasing: Michael Doblhofer (German, English) p: WhatsApp t: -102 @:

Condition: new, functionality: fully functional, machine/vehicle number: WGJ133354RM800466, overall weight: 31,000 kg, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 06/2024, loading space length: 10,800 mm, loading space width: 2,380 mm, loading space height: 2,300 mm, loading space volume: 49 m³, total length: 10,800 mm, total width: 2,550 mm, suspension: air, tire size: 600/55-R26,5, tire condition: 90 %, maximum speed: 60 km/h, color: silver, trailer brake: trailer braked, Equipment: ABS, Chassis painted in Novagrau: Payload optimized with integrated vehicle frame, total permissible weight 35,000 kg with an assumed fifth-wheel load of 11,000 kg, fifth-wheel height with standard tires approx. 1,250 mm, double hydraulic control block with operating panel, cable detachable (2 x double-acting NG 10, 24 V, continuous power on PIN 9 with 15-pin plug), pressure line NW 16, return line NW 20 with screw coupling, without truck installation (hydraulic system on the truck requires HDK screw coupling size 6, supply with screw plug and pressureless return with screw socket needed), support foot with gearbox, dual-circuit air brake system, 3 rigid braked axles, disc brake axle design, steel rims, tires 385/65-R22.5, 100 km/h version with EBS and COC papers, mechanical foldable underrun protection, air suspension with lifting and lowering, platform 10,800 mm x 2,380 mm, side walls and tailgate 2,300 mm high, profile filler for sidewalls, hydraulic large-capacity rear wall 500 mm, hydraulic walking floor with peripheral polyurethane slats, best possible sealing, hose routing, lighting 24V with 15-pin socket (no connection cable), side marker lights right and left (yellow), rear outline marker lights (white/red), front position lights (white), contour marking in accordance with ECE R 104, vehicles with ejector technology are not suitable for chemically aggressive media such as salts, fertilizers, sewage sludge, etc. 1st axle is an automatic lift axle, etc. Fodpeyinwzefx Afdopn Subject to prior sale! Information without guarantee!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34002026850, empty load weight: 5,875 kg, maximum load weight: 33,125 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 75 %, color: silver, - Chassis: semi-trailer, general haulage - Fine-grain steel welded frame, fifth-wheel plate with replaceable 2" kingpin - Slightly tapered outer frame, new design, "Load-Lock-Profil" for strap lashing - 24t 2-speed landing legs, single-side operation, straight foot, no shift compensation - Note: rear corner clearance / swing radius approx. 1930 mm - Rear pull-out ladder - 2 side door retainers - 2 wheel chocks with holder - Aluminium side impact protection - Galvanised steel rear underrun protection - Quarter-shell mudguards front/rear of axle unit - EC anti-spray flaps on 3rd axle - Rear corner impact protection - 1 lockable plastic toolbox, 600x425x460 mm # Axles & Suspension - 3x BPW drum brake axles Fpjdpfx Afjzzkrdjden - Axle/chassis laser-aligned - lower tyre wear & fuel use - Air suspension - Axle 1: auto lift axle, forced lowering, traction assist via "3x brake pedal" (active up to 30% axle overload, max. 25 km/h) # Braking System - 2-line air brake system - Colour-coded lines for easy servicing - Spring-loaded parking brake - 2 mismatch-proof coupling heads, front, no hose - 24V EBS with front socket, no cable - Caution: tow only with tractor units ensuring ABS effectiveness! - Raise & lower valve - Vehicle stability system # Wheels & Tyres - 385/65 R22.5" - Steel wheels, factory silver # Electrics - 24V multi-chamber lamps, yellow LED side markers - 2 white LED front position lamps - 2 white/red outline marker lights, rear - 2x 7-pin mismatch-proof front sockets, no cable # Floor - Screen-printed plywood approx. 30 mm, longitudinal bearers, forklift axle load up to 7,100 kg # Front Wall / Front Corner Posts - 2,580 mm high, box-section steel corner posts, front curtain release, "Crash-Blocker", steel impact guard approx. 140 mm high, lower inside # Centre Posts - 3 pairs sliding posts, full-length adjustable, 4 insertion pockets + long bottom pocket (bottom pocket omitted with side boards) - 3 pairs of post positions # Insertion Slats - 5 rows of aluminium insertion slats # Rear Wall / Rear Corner Posts - Steel rear corner posts to roof edge, curtain fixing with round tube & tensioning ratchet - 2-leaf rear barn doors, each with 2 internal rod locks # Curtain - Curtain with welded-in horizontal/vertical straps - Stainless steel tensioning locks # Roof - Sliding roof, rear bow lifts up, curtain slides rear-to-front, L-section roof rail (automotive-grade), internal width approx. 2,490 mm, white curtain - Non-elastic roof, minimal roof rail deflection when loading - Optimised rain channel at rear, above doors on end bow # Operating Notes - When forming a combination, observe the legal max. overall vehicle height! - If overall height exceeds 4,000 mm, note the following: - The haulier is liable for any damage incurred. - The delivery driver must obtain their own permit under § 29 StVO - We accept no liability for vehicle delivery/transfer. # Country of Registration / Plates - Germany - DEKRA inspection & report (per §13 EC-FGV) - 24/7 service hotline - Fliegl body-strength certificate to EN 12642 XL (payload up to 27,000 kg) - Prepared for single-row plate holder - Warning plate per ECE-70 - Reflective strips: white, continuous along bottom of side curtains, top corners (with side boards fitted: strip at bottom, on boards) - Reflective strips: red, all around rear doors

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,000 kg, maximum load weight: 31,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,330 mm, loading space height: 1,950 mm, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,470 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Year of construction: 2026, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ## Chassis – Semi-Tipper Trailer * High-tensile fine-grain steel welded lightweight construction with slight frame offset * Fifth wheel plate with replaceable 2” king pin * 24-tonne 2-speed landing gear, single-side operation, with semi-round base and straight mounting plate * Integrated mudguard mounting system with stone-repellent surface finish * Spray flaps only on last axle * 1 tarpaulin support bar with holder * 1 aluminium ladder approx. 3,550 mm with side mounting brackets * 2 rear towing hooks * Side-mounted tarpaulin bow holder on chassis ## Axles & Suspension * SAF disc brake axles with 430 mm brake discs * Laser-aligned axles and running gear for reduced tyre wear and fuel consumption * Air suspension system * 1st axle as automatic lifting axle, additionally electronically controlled from the truck * Includes forced lowering and traction aid * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust ## Braking System * Dual-line compressed air braking system * Colour-coded pipe routing for easy maintenance * Two non-interchangeable coupling heads at the front * 24 V EBS electronic braking system with front EBS socket * Raise-and-lower valve integrated Note: The trailer may only be operated with towing vehicles ensuring proper ABS functionality. ## Vehicle Stability System * Automatic tipping lowering function with shut-off valve * Axle load detection via EBS CAN bus signal for display in the driver’s cabin ## Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims, factory silver finish * TPMS (Tyre Pressure Monitoring System) according to ECE R141, displayed via truck EBS system ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights linked to indicators (flashing side lights) * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 2 × 7-pin and 1 × 15-pin front sockets * 2 additional integrated rear LED work lights ## Hydraulic System * Low-pressure hydraulic cylinder, max. 170 bar * First stage hard chrome plated * HDK screw coupling, fixed section, NW 48 mm * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut ## Tipping Body – Steel Tipping Body (HB 400) * High wear-resistant HB 400 steel body construction * Sloped front wall with external hydraulic cylinder mounting * Foldable aluminium protective sheet on right-hand side for sliding tarpaulin * External shovel and broom holder on front wall * Internal access ladder at front wall * Side walls: 4 mm continuous steel * Floor: 5 mm continuous steel ### Rear Door System * “Membrane” tailgate design * Two-piece rear door (50/50 split) * One sliding bolt integrated into right-hand door leaf * External rotary locking system with bottom mechanical locking Fpsdpfx Aszhgkiofdon ## Operating Platform & Equipment * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction) * Central locking on left-hand side