Used Fliegl Roll-Off Trailers for sale (348)

Condition: new, maximum load weight: 17,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,670 mm, loading space width: 2,500 mm, loading space height: 860 mm, total width: 2,520 mm, From ongoing production Total weight: 24,000kg/ 30,000kg Empty weight: 6,100kg Payload: 17,900kg/ 23,900kg Total length: 10,890mm Loading length: 8,670mm total, 2,520mm offset, 6,500mm loading bed Width: 2,520mm Loading height: 860mm Further information Steel welded construction Turntable with strong ball bearing ring Foldable rear support Wheel chocks with holder Aluminum side impact protection Rear mud flaps across the entire width (not in conjunction with forklift bracket) Half-shell mudguard 1st axle with anti-spray mud flaps Anti-spray mud flaps behind 2nd and 3rd axles Plastic tool box Extendable extensions to 3,000mm Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3,000 mm Lashing eyes for low loader 1 pair of lashing cutouts in the longitudinal beam at the front on the offset, 10 tons each. 4 pairs of lashing holes in the outer frame of the crank, each with 5 tons (tension belt attachment) 7 pairs of lashing mushrooms embedded in the outer frame at the top and side, each with 10 tons 1 x at the front on the crank, 6 x in the low bed Pair of ring lashing eyes embedded in the outer frame, each with 5 tons (can be converted to stake pockets) Pair of additional folding lashing eyes, each with 10 tons 1 x on the crank 1 x embedded in the floor behind the last axle Trailer towing device, turntable Draw fork with tested 40 mm drawbar eye Draw fork height adjustment via spring Axles + suspension Drum brake axles, at the manufacturer's discretion "Axles/chassis laser-measured" Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17.5" at the manufacturer's choice steel rims in twin arrangement, factory silver brake system 2-line compressed air brake system spring-loaded parking brake 2 interchangeable coupling heads at the front, with connecting lines to the motor vehicle, 24 volt ABS and ALB, with ABS plug at the front, with connecting cable electrics 24 volt, multi-chamber lights, yellow LED lighting on the side Bjdpfxeuytx Sj Agmoln 2 white position lights at the front 2 white/red lane keeping lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, LED rotating beacon with holder, switched via parking light (light removable) pair of warning signs with double LED lighting and extendable to 3,000mm floor front bend with steel/checker plate covering storage box embedded in the crossing slope to the bend then with approx. 70mm softwood floor, in the wheel arch area steel/checker plate covering rear bevel with 70mm softwood floor Low loading area including rear bevel 6,500mm Loading ramps Steel ramps 2,800mm long, 750mm wide, can be moved sideways Additional ramp lock foldable at the bottom (to prevent the ramps from slipping sideways, not in conjunction with lateral hydraulic ramp shifting) Covered with wood (tip area with steel/checker plate) Hydraulic via tractor auxiliary drive with throttle, actuation on the side in FR left Hydraulic connection with SVK plug NW 10/3, including connecting hose Paintwork Frame hot-dip galvanized including passivation Loading ramps hot-dip galvanized Plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 €/ net

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,900 kg, maximum load weight: 20,100 kg, overall weight: 24,000 kg, axle configuration: 3 axles, total length: 9,200 mm, total width: 2,550 mm, total height: 1,180 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example only. Production and equipment are customized according to customer specifications. # Chassis – Turntable Swap Body Trailer Heavy-duty fine-grain steel welded construction Adjustable and foldable front stop 2 pairs of removable guide rollers (front and rear) 4 container twist locks with reinforced outriggers on a 20" base for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball-bearing ring 2 wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Half-shell mudguards (front and rear) 2 lockable stainless steel toolboxes (600 × 400 × 500 mm) with polished doors 1 pair of double LED illuminated rear warning panels, extendable to 3,000 mm Bedpfozndmzex Agmoln Electrical connector prepared for customer-installed front warning panels # Drawbar Drawbar with certified 40 mm towing eye Mechanically adjustable drawbar length (6 × 100 mm positions), approx. 1,900–2,500 mm Spring-assisted drawbar height adjustment # Axles + Suspension BPW disc brake axles with 430 mm brake discs Laser-measured axle/chassis alignment for reduced tyre wear and fuel consumption Air suspension with raise/lower valve # Wheels and Tyres 385/55 R22.5 tyres (manufacturer's choice) Factory silver steel rims # Brake System Dual-line compressed air braking system Spring parking brake 2 non-interchangeable air couplings with connecting lines to the towing vehicle Electronic Braking System (EBS) with front connector and connecting cable Note: Trailer may only be operated with towing vehicles that ensure full ABS functionality. # Electrical System 24 V electrical system Multi-chamber lighting Yellow LED side marker lights 2 white front position lights 2 white/red rear outline marker lights Removable rotating beacon 1 LED rear work light, activated via reverse gear 2 LED side work lights (left and right), activated via reverse gear 1 × 15-pin front connector with connecting cable # Registration Prepared for registration in Germany DEKRA approval and certificate according to §13 EC-FGV 24/7 service hotline Prepared for single-line number plate holder ECE R48 reflective contour markings (white sides, red rear) # Finish Frame hot-dip galvanized with passivation, including 15-year anti-corrosion warranty Drawbar KTL-coated in black Please note: Archive photos shown – actual vehicle may differ.

Condition: new, maximum load weight: 8,780 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 950 mm, total width: 2,550 mm, Further information plus delivery/preparation from storage location 26639 Wiesmoor €1,280.00 / net Chassis Central Axle Tipping Trailer Steel welded construction, continuous tipping shaft at the rear with 80 mm ball bearing mount Front support leg with gearbox Foldable rear support 2 wheel chocks with holder Steel underrun protection Full-width rear mud flaps Quarter shell fenders 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable Note! Sidewall touches the storage box when folded down. Lockable storage compartment for loading ramps underneath the loading area Central axle trailer drawbar arrangement Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, adjustment range max. 300 mm Axles/Suspension GFA drum brake axles "Axle / Chassis laser measured" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5" manufacturer's choice Factory silver steel rims Braking System 2-line air brake system Color-coded line routing for easy servicing Manual spindle-operated parking brake ABS and ALB, with ABS plug at front and connection cable Attention: The trailer may only be towed by tow vehicles that ensure the operation of the ABS system! 2 foolproof coupling heads at the front, with connection lines to the truck Electrics 24 Volt, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red lane control lights at rear 2 x 7-pin foolproof plugs at front, with connection cable Hydraulics Three-way tipper, hydraulic multi-piston press with lift limit and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, retrofit on truck. Hydraulic connection with SVK plug NW 10/3, including connecting hose Operated hydraulically via truck PTO Blodpey Dzk Esfx Agmon Tipper Body Sturdy tipper body with 4 mm steel floor, steel sidewalls, sides continuous, foldable and hung on pivots with central locking on bottom. Rear corner posts insertable. Rear wall foldable and hung on pivots, with central locking on bottom. Body length approx. 5,000 mm, sidewalls with 6 bottom hinges. Sidewall return springs (not available with split sidewalls) Body width 2,420 mm 5 pairs of lashing rings in floor, each rated to 5 tons Operating Notes The stated gross vehicle weight is technically possible, but depending on the type of load, the total weight may not be achieved when adhering to permitted axle / support / saddle loads. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of Registration / Plates Country of registration: Germany with Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Outline marking with reflective strips according to ECE R 048, white on sides and red at rear Paintwork Frame hot-dip galvanized including passivation "15-year warranty against rust-through" Sidewall/body RAL 9005 deep black Optional: Drive-on ramps €1,280.00 / net

Condition: new, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 950 mm, total width: 2,550 mm, Further information plus pre-transport / provision ex warehouse location 26639 Wiesmoor €1,280.00 / net Chassis Central Axle Tipping Trailer Steel welded structure, continuous tipping shaft at the rear with 80 mm ball bearing Support leg with gear at the front Foldable rear support 2 wheel chocks with holders Steel underride guard Full-width rear mudflaps (not in combination with forklift mounting) Quarter-section mudguards 1 plastic toolbox, width=600 / height=425 / depth=460 mm, lockable (lock not included) Note! The sideboard touches the storage box when folded down. Lockable compartment for loading ramps under the cargo bed Drawbar system for central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable by spindle, max. adjustment range 300 mm Axles & Suspension GFA or BPW axles at manufacturer’s choice, with tapered roller bearings and S-cam brakes “Axle/chassis laser alignment” for reduced tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker compensation) Wheels and Tires 235 / 75 R 17.5" as per manufacturer’s choice Steel rims in factory silver Braking System 2-line compressed air braking system Color-coded lines for easy servicing Hand spindle parking brake 24 Volt ABS and ALB, ABS connector at the front, with connection cable Note: The trailer may only be towed by vehicles that ensure ABS functionality! 2 mistake-proof coupling heads at the front, with connection lines to the truck Electrics 12 to 24 Volts, multi-chamber LED lights, side yellow LED marker lights, license plate lighting in LED (Note! Certain towing vehicles may display diagnostic errors even if functionality is correct) 2 white position lights at the front 2 white/red lane marking lights at the rear 2 x 7-pin mistake-proof plugs at the front, with connection cable 1 additional LED work lamp at rear, activated by reverse light Hydraulics Three-way tipping system, hydraulic multi-piston press with lift limit and safety cable Low-pressure cylinder up to max. 170 bar, without restrictor. If required, this must be retrofitted to the truck (trucks with max. hydraulic pumping capacity of 55 l/min) Hydraulic connection with SVK plug NW 10/3, including connecting hose Operated hydraulically via truck PTO Tipper Platform Robust tipper platform with 4 mm steel floor, steel sides, continuous and foldable and swinging sideboards with central locking at the bottom. Removable corner posts at the rear. Drop-down and swinging tailgate, with central locking at the bottom. Platform length approx. 5,000 mm, sidewalls with 6 hinges at the bottom. Sideboard retracting springs (not available with foldable front wall) Platform width 2,420 mm 3 pairs of lashing eyes on floor, each rated for 5 t Operating Instructions The specified gross weight is technically possible. Depending on cargo, the gross weight may not be achievable while adhering to permitted axle, support, and kingpin loads. (Poor driving and trailing behavior can result from improper load distribution) Country of Registration / Plates Registered in: Germany With Dekra inspection and certificate (according to §13 EG-FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on sides and red at the rear Paintwork Frame hot-dip galvanized incl. passivation "15 years warranty against corrosion through rust" Sideboard/Platform in RAL Bljdpey Dzliefx Agmen

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,740 kg, maximum load weight: 14,260 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 9,430 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Custom Transport Solution Configure your Fliegl trailer to your individual requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Attention: Archive pictures are used! Chassis Heavy-duty welded steel low-loader turntable trailer chassis Heavy-duty turntable with ball-bearing race Integrated storage box in turntable front section Folding rear support Wheel chocks with holders Aluminium side underrun protection Full-width rear mud flap Semi-circular mudguards on 1st axle with anti-spray mud flaps Anti-spray mud flaps behind 2nd axle Spare wheel carrier incl. spare wheel (steel rim) Lockable plastic toolbox with shelf (padlock not included) Lashing Equipment 3 pairs of integrated 10 t lashing points at the front 5 pairs of recessed 10 t lashing mushrooms on top and sides of the outer frame Bjdpjzl R S Ssfx Agmsln Additional 5 t recessed lashing rings instead of stake pockets Maximum spacing between lashing points: 1,200 mm Drawbar Height-adjustable drawbar with certified 40 mm towing eye, angled by 8° Axles & Suspension SAF drum brake axles Laser-aligned axle and suspension geometry for reduced tyre wear and fuel consumption Maintenance-free parabolic spring suspension with steel-rubber bushings Wheels & Tyres 235/75 R17.5 tyres Twin steel wheels, factory silver finish Braking System Dual-line air brake system Spring parking brake Two anti-mix coupling heads with air lines to towing vehicle ABS & ALB with front ABS connector and connection cable Compatible only with towing vehicles supporting ABS functionality Electrical System 24 V lighting system Multi-chamber rear lights Yellow LED side marker lights 2 white front position lights 2 red/white rear outline marker lights 2 × 7-pin front connectors with connection cables Loading Platform Steel deck in front section 70 mm softwood flooring Steel chequer plate over wheel arches Rear beavertail with 70 mm timber flooring Total low-bed loading area incl. beavertail: approx. 7,200 mm Loading Ramps 2 steel loading ramps Length: 2,800 mm Width: 750 mm Side-adjustable Timber-covered Spring-assisted lifting Foldable lower ramp locks to prevent lateral movement Operating Notes A special permit is required for 10,000 kg axle load (approval must be obtained individually in each German federal state). The stated gross vehicle weight is technically possible; depending on the cargo, the maximum permissible weight may not be achievable while complying with legal axle, kingpin and support loads. Registration Registration: Germany EC type approval (2007/46/EC) 24/7 service hotline Prepared for two-line licence plate holder ECE R48 reflective contour marking (white sides, red rear) ECE 70 rear warning plate

Condition: used, overall weight: 25,000 kg, axle configuration: 2 axles, first registration: 06/2014, Equipment: ABS, Visit our website, where you will find our complete vehicle inventory with many more photos and information in multiple languages. Bsdpfx Agjx Ep Eyemoln SEL 7566 Fliegl SZS 270 German registration / single owner First registration: 24.06.2014 Technical gross weight (kg): 27,000 Permitted total weight (kg): 25,000 Curb weight (kg): 5,100 VIN: WFDFLT22701003772 TIRES AND AXLES: Tires: 205/65 R 17.5 Axle configuration: 2 SAF axles Air suspension Drum brakes BODY: Internal dimensions: Width (m): 2.48 Length (m): 9.21 + Side panel height (m): 0.58 VEHICLE DOCUMENTS: Registration certificate (Schein) Vehicle title (Brief) German vehicle approval form M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosnian) L. OBODYNSKA Ukrainian/Українська, Russian/Русский We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Although every effort has been made to ensure the accuracy of the information, we cannot be held liable for any errors or omissions. We kindly request that our customers consult the available photos. The specified dimensions are approximate values. Our vehicles are sold as-is, in their current condition. We invite customers to visit our facility to personally inspect the vehicle’s condition. Furthermore, we offer the possibility of a test drive. Please note that the batteries supplied with the vehicle are those currently installed. If the customer prefers new batteries, we are happy to provide pricing information.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 34,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,420 mm, loading space height: 2,150 mm, loading space volume: 49 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/65 r22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grain steel welded construction, lightweight design, fifth wheel plate with interchangeable 2 kingpins Curved front end, patented 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation Wedge supports + holder Under-run protection, foldable Semi-shell fenders Integrated fender holder, surface repels stones Towing hook at the rear Axles + Suspension SAF disc brake axles Axle/suspension laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist, activated by 3x braking (starting assist functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Wheels & Tires 385/65R22.5, manufacturer's choice Polished aluminum rim, manufacturer's choice Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin socket at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw-on fitting, fixed part, NW 48 mm Actuation hydraulically via truck auxiliary drive Tippers Aluminum box tipper, sloping front wall, 5 mm thick, with external side walls made of 30 mm hollow profile, cleanly welded, with upper edge profile that prevents spillage of bulk goods. Interior with access ladder on the front wall Shovel and broom holder on the outside of the front wall Greenline - conical and aerodynamic tipper body shape Membrane - rear wall Rear wall as a swing-open flap with double-joint hinge, externally mounted with 2-fold hook locking. Bodpsi Ri Idsfx Agmsln Rear wall with rubber seal Note! Heat-resistant up to max. 170°C! Floor continuously 5 mm thick, Brinell 110 Note! Only for the transport of sand, gravel and rolled gravel with a maximum grain size of up to 20 mm! All other transported goods are excluded from the warranty! Standing platform with access ladder, connecting plate for air/electricity and brake with large space for the best possible operation. Roll tarp, single-sided for storing on the right-hand side (when facing forward), with central locking on the left-hand side (when facing forward) Operating instructions For the transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chromed piston rod to protect against rust The specified total weight is technically possible, but depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) Country of registration / Signs Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline pre

Condition: new, empty load weight: 3,020 kg, maximum load weight: 8,640 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,950 mm, suspension: other, color: white, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, - Fliegl three-sided tipping trailer, type TSK 118, new vehicle, delivery time on request - Aluminum ramps optional, 1,800 EUR net - Price with ramps: 22,700 EUR plus VAT - Factory new - Frame hot-dip galvanized - Permissible total weight: 11,800 kg - Unladen weight: 3,160 kg - Payload: 8,640 kg - Overall length: 6,950 mm - Overall width: 2,550 mm - Platform dimensions: L 5,000 mm, W 2,420 mm, loading height: 950 mm - Steel welded construction - Support leg at the front - Folding rear support (aluminum ramps optional, 1,800 EUR net) - Underrun protection, steel - Continuous mud flaps at the rear - Lockable storage compartment for loading ramps below the loading platform - Towing eye, 40 mm - Drawbar, height-adjustable - BPW axles - "Chassis laser-aligned" to reduce tire wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization - 235/75R17.5 tires - 2-line pneumatic braking system, manual parking brake - ABS and ALB - Stable tipping platform with 4 mm steel sheet floor - Side walls foldable and pivoting with central locking - Corner posts at the rear, plug-in type - Rear wall foldable and supported with central locking - 5 pairs of lashing points in the floor, each 5 tons - Contour marking with reflective strips - Frame hot-dip galvanized, 15-year warranty against rust - Platform color: RAL 9010 pure white - Errors and prior sale excepted! - More information, additional XXL pictures, directions, can be found on our website at: ... VAT can be shown, ABS, new, very good condition, HSN 7951, TSN 000, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban) Bledpfx Agezv Nrlsmsn

Condition: new, maximum load weight: 13,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,500 mm, loading space width: 2,520 mm, loading space height: 860 mm, total width: 2,550 mm, Total weight: 18,000kg/ 21,000kg Empty weight: 4,800kg Payload: 13,200kg/ 16,200kg Total length: 9,450mm Loading length: 7,500mm including rear bevel Width: 2,520mm Loading height: 860mm Further information - Frame painted in stock color Nova gray - Wooden floor 70 mm - Steel ramps 2,800mm long x 750mm wide, can be moved sideways - With spring jack support - Folding rear support - Aluminum side impact protection - Plastic tool box - Widening package 3m - Large lashing package - 5 pairs of ring lashing eyes embedded in the outer frame (can be converted to stake pockets), 5 tons each, 7 pairs of lashing mushrooms embedded at the top and side of the outer frame, each 10 ton. - 50mm towing eye - Air suspension - Raise & lower valve - Axle load detection via EBS-Canbus signal - Tires 235/75R17.5 - 2 x 7-pin connector at the front Bedor Da Uvepfx Agmsln - LED rotating beacon - 2 pairs of warning signs with double LED lighting, extendable 3m plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 €/ net

Condition: new, empty load weight: 2,810 kg, maximum load weight: 8,990 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,500 mm, total length: 8,120 mm, suspension: other, color: grey, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, - FLIEGL Tandem platform trailer TPS 118 with angled rear and ramps - New vehicle, delivery time upon request - Price: 21,900 EUR plus VAT - Fine-grained steel welded construction, hot-dip galvanized - 6 pairs of lashing eyes in the floor, each rated at 5 tons - Storage box - BPW drum brake axles - Parabolic suspension with maintenance-free steel/rubber/bearing system - 235/75R17.5 tires - Permissible total weight: 11,800 kg, unladen weight: 2,810 kg - Payload: 8,990 kg - Overall length: 8,080 mm, overall width: 2,550 mm - Internal platform dimensions: L 6,200 x W 2,550 - Loading height: 910 mm - Coupling height: 700 to 950 mm - Steel corrugated floor, hot-dip galvanized - Rear angle of approx. 900 mm - Aluminum front and side panels, 400 mm high - Center and corner posts removable - Steel ramps with wooden covering, L 2,300 x 510 mm, laterally adjustable - Gas spring supports for single-person operation - Reflective strips according to ECE R048, white on the sides, red at the rear - Axle and frame painted in DB7350 Novagrau - 10-year warranty against rust - Errors and prior sales excepted! - More information and additional photos on our website: ... VAT can be shown, ABS, new, HSN 7951, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban) Bedpjzv Nrfsfx Agmsln

Condition: used, empty load weight: 3,690 kg, maximum load weight: 9,810 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 09/2019, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,700 mm, loading space volume: 48 m³, suspension: air, tire size: 285/70R19,5 148J, color: other, gearing type: other, front tire size: 285/70R19,5 148J, rear tire size: 285/70R19,5 148J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing rings, , --  Misprints, errors and changes reserved, Sample pictures --, More details at: !, More details: ! Bjdpfxoz H T Tfe Agmsln

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,480 kg, maximum load weight: 34,520 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 7,450 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Semi-Trailer Container Chassis Fine-grained steel welded construction, semi-trailer plate with replaceable 2 kingpins and 2 kingpin positions Front locking mechanism on tipper ram mounting block with guide wedges on both sides, rear locking mechanism on continuous rotary shaft with spring return Without subframe for self-supporting containers Container mounts: Locking cross members, double-mounted for securing 1 x 20-foot container (Note: low fifth-wheel load for 20-foot containers) 24 metric tons, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Clear support foot corner dimension or clear rear swing radius approx. 1850 mm 2 wheel chocks with holders Half-shell fenders with anti-spray flaps per EC standards Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK Screw coupling, fixed part, nominal diameter 48 mm. (without hose connection) Hydraulic operation via truck auxiliary power unit Hydraulic connection with hose and HDK screw plug, nominal diameter = 48 mm, with knurled nut Axles + Suspension 3 SAF disc brake axles with 430 mm disc diameter Laser-measured axles/chassis to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44to Gross train weight Air suspension. Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Spring-loaded parking brake 2 non-reversible coupling heads at the front, without connecting line EBS, Electronic Brake System with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation required (no calibrated scale) Wheels and Tires 6 385/65 R22.5 (manufacturer’s choice) 6 steel rims, factory silver Electrical System 24 volts, multi-chamber lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-keeping lights 2 x 7-pin reverse-proof sockets in front, without connecting cables Country of Registration/License Plates Germany With DEKRA approval and inspection report (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holder Contour markings with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Bljdpji Ri Euefx Agmon Frame: colour of choice 10-year warranty against rust-through Support feet: Black coated Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 11,800 kg, maximum load weight: 29,200 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,350 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,650 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Tailored Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis: Low-loader semi-trailer Steel welded construction, kingpin plate with interchangeable 2 kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower section and straight connection plate, with stroke compensation Foldable rear supports Wheel chocks with holder Aluminum side underrun protection Splash guards in front of the 1st axle and behind each axle with anti-spray, according to EC Toolbox, stainless steel, w=600/h=400/d=500 mm, with polished door, lockable Bjdpfx Aei Ri E Uegmjln Hydraulic lift table after gooseneck, approximately 3000 mm long, hydraulically raised for crossing the gooseneck, with mechanical locking in the raised position. Operated with a wireless remote control Electric winch, 24 volts, pulling force 8165 kg, mounted centrally at the front on the gooseneck loading area, in a stainless steel box with a door (if technically possible, further review required), operated with a wireless remote control, cable length 35 m x approx. 10 mm, with roller cable guide and removable guide rollers on the gooseneck and rear slope. Tie-down points: Low-loader Gooseneck: 5 pairs of tie-down points recessed in the outer frame, each with 5 tons. 2 pairs of tie-down points in the middle, each with 5 tons. 1 pair of tie-down eyes recessed at the top and outside in the outer frame in the neck slope, each with 10 tons. Main platform: 4 pairs of tie-down points recessed in the outer frame, each with 5 tons. 4 pairs of tie-down points in the middle, each with 5 tons. 1 pair of tie-down eyes recessed at the top and outside in the outer frame, each with 10 tons. Rear platform: 4 pairs of tie-down points recessed in the outer frame, each with 5 tons. 5 pairs of tie-down points in the middle, each with 5 tons. 4 pairs of tie-down eyes recessed at the top and outside in the outer frame, each with 10 tons. Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption Last axle with steered trailing arm, with automatic reversing lock via reversing light, and additional locking function on the vehicle via a hand button Air suspension with lift/lower valve, with holding function for lowering + auto-reset function Wheels and Tires 235 / 75 R 17.5 According to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air brake system Spring brake parking brake Vehicle - Driving Stability System Axle load recognition via EBS-CAN bus signal, for display on the driver's cab, truck must be appropriately prepared, no truck installation (no calibrated scale) 2 fail-safe coupling heads in front, without connection cable EBS, Electronic Braking System with EBS socket in front, without connection cable Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the sides 2 white position lights in front 2 white/red side marker lights in the rear Lights completely in LED version 2 x 7-pin and 1 x 15-pin fail-safe sockets in front Additional LED work lights, at the rear, switched via reversing light LED rotating beacon with holder, switched via parking light Pair of warning signs, double LED illuminated and extendable to 3000 mm Floor Gooseneck with Mega Grip, covered with interlocking grating/low-loader platfo

Condition: new, maximum load weight: 8,220 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, NEW VEHICLE Fliegl tandem sliding curtain through-loader tandem Through-loading system with front portal doors Drive-over flap 2,400 mm wide and 350 mm long Total weight 11,800 kg Bljdpfx Ajp N Ib Nogmon Payload 8,220 kg Empty weight 3,580 kg Total length 9,450 mm Loading length 7,300 mm Loading width 2,480 mm Inside height 2,790 mm Loading height 1,000 mm Outer frame with LOAD LOCK profile Foldable rear support Towing eye 40 mm Length-adjustable towing tube from 1,950 mm to 2,300 mm Air suspension with raising and lowering valve Plus pre-freight / provision from the Wiesmoor storage location 1,280.00 ¤/ net Rental purchase offer: term 48 months, residual value 40%, down payment only VAT, monthly rate EUR 519.00 net Vehicle is available for delivery at short notice from current production. Tarpaulin color can still be selected in some cases.

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2015, Equipment: ABS, Fliegl walking floor * EZ 06.03.2015 * 3-axles * 92 cubic meters * 1st axle lift axle * SDS 390 * Empty weight: 7,200 kg Bedpfxervu Sno Agmeln * Tires: * 1st axle 385/55 R 22.5 v.l. 8 mm & v.r. 11 mm * 2nd axle 385/55 R 22.5 v.m.l. 10 mm & v.m.r. 11 mm * 3rd axle 385/55 R 22.5 h.l. 10 mm & h.r. 9 mm * German trailer / German semitrailer * 1 vehicle owner / 1 owner * All information without guarantee * Further information and criteria on additional services / Additional service * Repainting, retrofitting possible / repainting possible * Short-term license plate / customs license plate * Transfer and shipment possible * Help with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop * Mówimy po polsku. * We speak English. * Goworim po russki * The repainting in your desired color is possible in our house at a reasonable price and in good quality. * You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 12,800 kg, maximum load weight: 44,200 kg, overall weight: 57,000 kg, axle configuration: > 3 axles, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are individually tailored to customer specifications. Chassis, Low-bed Semi-trailer Steel welded construction, drawbar plate with interchangeable 2 kingpin and 2 kingpin positions 24 tons, 2-speed landing gear, one-sided operation Foldable rear support 2 chock blocks with holder Aluminum side guard 1 plastic toolbox, with insert tray, w=620/h=360/d=440 mm, lockable with a padlock Extendable widening sections to 3,000 mm Storage compartment for timber planks on gooseneck, transverse at the front Timber planks 70 mm for widening to 3,000 mm Telescoping Central tube frame in cleanly welded, interlocking telescoping frame sections. Extendable by a maximum of 6,000 mm and lockable approximately every 1,000 mm Locking with mechanical pin lock With sliding platform Tie-down eyes, low-bed Bedpji Ri Hnjfx Agmoln 2 pairs of ring-type tie-down eyes, each 5 tons, at the front on the gooseneck; 11 pairs of tie-down loops embedded at the top and side in the outer frame, each 10 tons; 2 on the gooseneck, 9 distributed in the low-bed area; first tie-down eye 250 mm from the front and last at most 250 mm from the rear, spacing of tie-down eyes not greater than 1,100 mm 8 pairs of socket pockets embedded in the outer frame, inner dimensions 70 x 40 mm, (can be converted to 5-ton ring-type tie-down eyes, not included in the scope of supply) 3 pairs of folding tie-down eyes additionally embedded in the low-bed area, each 10 tons; 1 at the front of the low-bed, 1 in front of the 1st axle, and 1 behind the 3rd axle Axles + Suspension SAF drum brake axles Axle/chassis laser-measured, reducing tire wear and fuel consumption Last 2 axles steerable, with automatic reverse locking via reversing light and manual locking function via a button on the vehicle Air suspension with lift and lower valve Wheels and Tires 235 / 75 R 17.5, manufacturer Fulda Steel rims in twin configuration, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab; truck must be appropriately prepared; no truck installation (no calibrated scale) 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 LED revolving beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning panels, double LED-lit and extendable to 3,000 mm 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Floor Gooseneck with steel / chequered plate surface Storage box embedded in the ramp to the gooseneck Then with 70 mm soft wood floor, steel/chequered plate surface in the wheel arch area Rear slope with 70 mm soft wood floor Side Walls 25 mm aluminum hollow profile, 400 mm high, at the front and side on the gooseneck, pluggable Ramps Steel ramps, 2,800 mm long, 750 mm wide, laterally movable Covered with wood Hydraulically operated via tractor PTO with flow control Hydraulic connection with SVK coupling NW 10/3, without connect

Condition: used, maximum load weight: 24,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2012, Year of construction: 2012, Equipment: ABS, Total weight: 35,000 kg Unladen weight: 11,000 kg Payload: 24,000 kg Lift axle Air suspension Bjdpfx Agsz Iglkjmeln Tires: NEW MOT (technical inspection): NEW In very good condition Net price

Condition: used, axle configuration: > 3 axles, suspension: air, tire size: 385-65R22.5, Year of construction: 2015, Tandem tipper trailer, 3-way tipper, internal dimensions approx. 4,950 x 2,360 x 900 mm, steel side walls swinging and foldable with central locking, rear wall swinging with automatic opening. Tires 385-65R22.5 - 4x new, air suspension, ABS. 50 mm adjustable towing eye via screw plate, single-circuit hydraulics, dual-circuit air (Duomatic), 24 volts. Permissible total weight 18,000 kg, payload 13,400 kg. Body painted green, chassis gray. Next inspection valid until May 2026. = Additional Information = Blsdpewmlnysfx Agmen Tire size: 385-65R22.5 Suspension: Air suspension Unladen weight: 4,600 kg Payload: 13,400 kg Gross vehicle weight: 18,000 kg Please contact Jan-Marc Schwickert for further details.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,100 kg, maximum load weight: 23,900 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 10,900 mm, total width: 2,550 mm, total height: 860 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are customised to customer requirements. #Low Loader Drawbar Trailer Chassis Welded steel construction Turntable with heavy-duty ball race Folding rear support legs Wheel chocks with holders Aluminium side underrun protection Full-width rear mudflap Half-shell mudguards on 1st axle with anti-spray mudflaps Anti-spray mudflaps behind 2nd and 3rd axles 1 lockable plastic toolbox with shelf, W 600/H 425/D 460 mm Extendable outriggers to 3,000 mm Central storage compartment for timber planks 70 mm timber planks for 3,000 mm extension #Lashing Points Low Loader 1 pair of recessed 10 t lashing cut-outs in front gooseneck side members 5 pairs of 5 t lashing holes in gooseneck outer frame 7 pairs of recessed 10 t mushroom lashing points in top and side outer frame 1 on gooseneck 6 in low bed First lashing point 250 mm from front, last max. 250 mm from rear 5 pairs of recessed stake pockets in outer frame, internal size 70 x 40 mm (convertible to 5 t ring lashing eyes) 2 pairs of additional 10 t folding lashing rings 1 on gooseneck 1 recessed in floor behind last axle #Drawbar Equipment Drawbar with certified 40 mm towing eye #Axles + Suspension Drum brake axles, manufacturer's choice Bedpjznwdyofx Agmeln "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushes and mechanical axle load equaliser #Wheels and Tyres 235/75 R 17.5 steel wheels, twin fitment, factory silver "RDKS" tyre pressure monitoring system to ECE R 141, display in towing vehicle via EBS #Braking System Twin-line air brake system Spring parking brake 2 non-interchangeable front coupling heads with connecting lines to towing vehicle 24 V EBS electronic braking system with front EBS plug #Electrical System 24 V multi-chamber lights with yellow side LED lights Flashing side LED lights linked to indicators 2 front white position lights 2 rear white/red outline marker lights 2 x 7-pin non-interchangeable front plugs 1 LED beacon with bracket 2 pairs of illuminated LED warning boards, extendable to 3,000 mm #Floor Front gooseneck with steel chequer plate Recessed storage box in transition to gooseneck Then 70 mm softwood floor, steel chequer plate in wheel arch area Rear bevel with 70 mm softwood floor Low loader deck incl. rear bevel: 6,500 mm #Loading Ramps Steel ramps approx. 3,000 mm long, 750 mm wide, laterally adjustable Additional folding lower ramp lock Timber-covered Spring-assisted lifting #Operating Instructions At 10,000 kg axle load, a special permit is required; only indivisible loads permitted! #Registration / Plates Registration country: Germany 24/7 service hotline Reflective contour markings to ECE R 048, white sides, red rear Warning plate to ECE 70 #Paint Finish Chassis hot-dip galvanised incl. passivation "15 Jahre Gewährleistung gegen Durchrostung" Loading ramps hot-dip galvanised

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 760 kg, maximum load weight: 1,740 kg, overall weight: 2,500 kg, axle configuration: 1 axle, tire size: 235 / 75 r 17,5, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information: Chassis: Central axle trailer Fine-grained steel welded construction, including 4 mounting points for IBC containers, as technically feasible. In case of an order, customer approval of the drawings is required! 2 longitudinal beams as double-T beams for subsequent self-supporting structure with front crossbeam 2 pairs of lashing eyes for securing the IBC container Telescopic support leg at the front Chocks with holder Fenders without side impact protection Steel underrun protection Coupling device for central axle trailer Drawbar with tested 40 mm tow hitch, suitable for freight transport Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension GFA or BPW axle, as selected by the manufacturer, with tapered roller bearing and S-cam brake Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing Wheels and Tires 235 / 75 R 17.5 as selected by the manufacturer Steel rims, factory silver Braking System 2-line compressed air braking system Spring brake parking brake Blsdpfxji Ri Ane Agmon 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle without ABS, but with mechanical ALB, then max. 60 km/h approval Electrical System 24 Volt, multi-chamber lights, without yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable connectors at the front, with connecting cable Registration country/signs Registration country: Germany with DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Painting Frame DB 7350 Novagrau 10-year warranty against rusting Attention! These are archive images. Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Condition: new, maximum load weight: 31,100 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 10,410 mm, loading space width: 2,500 mm, loading space height: 900 mm, total width: 2,520 mm, Total weight: 24,000kg/40,000kg Empty weight: 8,900kg Payload: 15,100kg/31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm offset, 7,920mm loading bed including rear bevel Width: 2,520mm Loading height: 900mm Further information plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 €/net Steel welded construction Turntable with strong ball bearing ring Foldable rear support Wheel chocks with holder Aluminum side impact protection Rear splash guards across the entire width (not in conjunction with forklift bracket) Half-shell mudguards 1st + 2nd axle with anti-spray splash guards behind each axle, Anti-spray flaps in front of and behind the 3rd and 4th axle Excavator arm recess above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes each 5 tons. in the excavator arm recess on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear bevel 1 plastic tool box, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in the floor on a crank with lid, W=720 mm/ L=520 mm / D= 170 mm Extensions extendable to 3,000 mm (not in the rear bevel) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width Bljdpfx Aerducpjgmsn 2,550 mm) Storage compartment for wooden planks below the low-loading area Wooden planks 70 mm for widening to 3,000 mm Lashing eyes for low-loader 1 pair of lashing cutouts in the longitudinal beam at the front on a crank, 10 tons each. 4 pairs of lashing holes in the outer frame, each with 5 tons (tension belt attachment) 9 pairs of lashing mushrooms, embedded in the outer frame at the top and sides, each with 10 tons 2 x at the front on the bend 7 x in the low bed First lashing eye 250 mm from the front and last max. 250 mm from the back, distance between the lashing eyes not greater than 1100 mm 3 additional pairs of folding lashing eyes, each with 10 tons 1 x on the bend (sticks out) 1 x at the beginning of the low bed, embedded inside on the longitudinal beams 1 x embedded in the floor behind the last axle Towbar with tested 50 mm towing eye Towbar height adjustment via spring Axles + suspension Drum brake axles, as selected by the manufacturer "Laser-measured axle/chassis" Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free Steel-rubber bearings and mechanical axle load compensation at the front and rear (rocker compensation) Wheels and tires 235 / 75 R 17.5" at the manufacturer's discretion Steel rims in twin arrangement, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 interchangeable coupling heads at the front, with connecting lines to the towing vehicle, 24 volt ABS and ALB, with ABS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrics 12-24 volts, multi-chamber LED lights, yellow LED lighting on the side, license plate lighting in LED, (Note! Incorrect diagnoses can occur with certain towing vehicles, although the function is present) 2 white position lights at the front in LED 2 white/red lane keeping lights at the rear in LED 2 x 7-pin, interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (light removable) 2 pairs of warning signs with double LED lighting and extendable

Condition: new, maximum load weight: 8,840 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 900 mm, total width: 2,550 mm, New Fliegl tandem low-loader with ramps type TPS 118 Chassis fully hot-dip galvanized - side walls aluminum Vehicle from current production - Delivery time approx. two weeks Gross weight: 11,800 kg Unladen weight: 2,960 kg Payload: 8,840 kg Overall length: 8,000 mm Loading length: 6,200 mm incl. rear slope Width: 2,550 mm Loading height: 900 mm Additional information plus pre-shipping / provision ex stock 26639 Wiesmoor €1,280.00 / net Blsdpfxsv E Dqle Agmjn Loading width: 2,480 mm Chassis: central axle trailer Fine-grain steel welded construction Outer frame slightly sloped, new version with 'Load-lock profile' for lashing strap hooks 3 pairs of lashing rings on the outside floor, 5 t each 1 x front in the corners, 1 x before and 1 x in rear slope at the back Pair of lashing rings on outside floor/frame, 5 t each Support leg at the front Folding rear support 2 wheel chocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Full-width rear mudflap (not in combination with forklift holder) Quarter shell mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Drawbar system central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & suspension GFA axles with tapered roller bearings and S-cam brake 'Axles/chassis laser-measured' Reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker compensation) Braking system 2-line compressed air braking system Color-coded pipe routing for easy service. Hand spindle parking brake 2 error-proof coupling heads in front, with connection lines to tractor unit, 24 volt ABS and ALB, with ABS plug in front, with connecting cable, Note: The trailer may only be towed by towing vehicles that ensure the ABS function! Wheels and tires 4 x 235/75 R17.5 make at the manufacturer’s choice 4 steel rims, factory silver Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white LED positioning lights front 2 white/red marker lights rear 2 x 7-pin error-proof connectors at front, with connection cable, Floor Steel/chequer plate floor for high point load capacity Note: Slight floor warping possible due to welding distortion! Platform length approx. 6,200 mm Rear slope approx. 900 mm Front bulkhead / corner posts 25 mm aluminum hollow section, 400 mm high, Side walls 25 mm aluminum hollow section, 400 mm high, foldable and removable Central stanchions 1 pair of folding stanchions at side wall height, foldable and removable Rear wall / rear corner posts 1 pair of steel stanchions fixed to the frame with support for ramp locking. Entry width approx. 2,430 mm Ramps 2 steel ramps 2,300 mm long, 510 mm wide, laterally adjustable with hand grip on the ramps covered with wood (tipped with steel/chequer plate) with gas spring assist for single-person operation Painting Frame hot-dip galvanized including passivation '15-year warranty against rust-through' Front bulkhead RAL 9006 white aluminum Side wall RAL 9006 white aluminum Ramps hot-dip galvanized Lease-purchase offer: Term 48 months, down payment only VAT, final residual value 40%, monthly rate EUR 350.00

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,400 kg, maximum load weight: 33,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,960 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ## Chassis * High-tensile fine-grain steel welded lightweight construction * Fifth wheel plate with replaceable 2” king pin * Patented curved front end design * Parking in loaded condition not permitted; when unhooked, the vehicle must be positioned with a rearward tilt * Foldable underrun protection * Integrated mudguard mounting system with stone-repellent surface * Asphalt specification spray flaps behind last axle, hinged to mudguards with upper locking option; shortened mudguards ## Axles & Suspension * Disc brake axles with 430 mm brake discs * Laser-aligned axles and running gear for reduced tyre wear and fuel consumption * Off-road axle specification * Air suspension system * 1st axle as automatic lifting axle with forced lowering and traction aid * Galvanised lifting axle mechanism ## Braking System * Dual-line compressed air braking system with colour-coded piping for simplified maintenance * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front (without connecting lines) * 24 V EBS electronic braking system with front EBS socket (without connecting cable) * Raise-and-lower valve integrated * Vehicle stability control system ## Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims, factory silver finish * TPMS (Tyre Pressure Monitoring System) according to ECE R141, displayed via truck EBS system ## Electrical System Blsdpsi Rix Isfx Agmen * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights linked to indicators (flashing side marker lights) * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 2 × 7-pin front sockets ## Hydraulic System * High-pressure tipping cylinder, max. 250 bar * HDK screw coupling, fixed section, NW 48 mm * Hydraulic operation via truck PTO (power take-off) ## Tipping Body – Stone Master Thermo Body * Round steel body in “Stone Master Design” made of high wear-resistant HB 400/450 steel * Sloped front wall with external hydraulic cylinder mounting * Front wall access ladder included * “Membrane” tailgate design: externally mounted pendulum rear door with double hook locking system * Two clamping screws with lever fasteners on lower side * Side walls: 4 mm continuous steel * Floor: 4–5 mm steel, wear- and weight-optimised construction * Fully insulated Fliegl Asphalt Profi Thermo body * Insulation on front, sides, bottom and rear (Fliegl Isotherm system) * BASIC cover system with tarpaulin enclosure * Standing platform with access steps * Connection panel for air, electrics and braking system with large free working space for optimal handling * Sliding tarpaulin system, one-sided storage on RHS (right-hand side), with central locking on LHS (left-hand side) ## Registration & Compliance * Germany * EC type approval according to 2007/46/EC * Body strength certification according to EN 12642 * 24/7 service hotline * Manufacturer certification for thermal vehicles according to RS 10 – 2013 * Prepared for single-line licence plate holder * Warning plate according to ECE R70 ## Optional Thermo Insulation Packages * BASICplus: sheet metal cladding * PREMIUM: stainless steel cladding

Condition: used, Year of construction: 2018, _____Semi-trailer, Fliegl, for external loading only, 3 axles, tire size 365/65R22.5, storage location: customer. Blodpfezdh R Dox Agmjn

Condition: used, machine/vehicle number: WFDFLT21301006798, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 05/2017, tire size: 285/70 r19,5, Further information: Fine-grained steel welded construction, fifth-wheel coupling, manufacturer at our discretion for 2 kingpins, telescopic support leg, chocks with holder, steel underrun protection, half-shell fenders, removable upper parts Drawbar with tested 50 mm drawbar eye, lower coupling for drawbar BPW disc brake axles, air suspension with raise and lower valve, mechanical dolly steering system (required in Germany to comply with the BO-Kreis regulations) 2-line compressed air brake system, spring-loaded parking brake, Duomatik coupling head at the front, with connecting lines to the tractor unit, Duomatik coupling head for the semi-trailer, including connecting coil, EBS, electronic brake system with EBS plug at the front, with connecting cable EBS connecting cable to the semi-trailer, with CAN router, axle load detection for the truck via EBS, without truck installation. Note: The trailer may only be pulled by tractor units that ensure the effectiveness of the ABS! 24 volts, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, 1 x 15-pole plug at the front, with connecting cable to the truck, 1 x 15-pole socket, with connecting coil to the semi-trailer, cable for reversing camera system with socket with DEKRA approval, prepared for single-row license plate holder, contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear, warning sign according to ECE - 70 Blsdpfsi Rivtjx Agmon Saddle height approx.: 960 mm