Used Fliegl Vts Trailers for sale (332)

Condition: new, maximum load weight: 30,010 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 10,000 mm, loading space width: 2,520 mm, loading space height: 900 mm, total width: 2,550 mm, Brand-new Fliegl 4-axle low-bed trailer with wheel recesses and split ramps, type VTS 400 RM Hire-purchase offer: 48-month term, down payment only the VAT, final residual value 40% Monthly rate: EUR 899.00 Vehicle / Body: Low-bed trailer First registration: New vehicle Gross weight: 24,000kg/40,000kg Unladen weight: 9,990kg Payload: 14,010kg / 30,010kg Overall length: 12,000mm Loading length: total approx. 10,000mm, gooseneck approx. 2,850mm, load bed including rear taper approx. 7,150mm Width: 2,550mm Loading height: 900mm Further information Chassis: Low-bed trailer Steel welded construction Turntable with heavy-duty ball race Foldable rear support Wheel chocks with holders Aluminum side underrun protection Full-width rear spray flap Djdstrizkepfx Aafjcp Half-shell mudguards 1st and 2nd axle with anti-spray mud flaps behind each axle, anti-spray mud flap behind the 4th axle Excavator arm trough above rear axles, from the rear axle to the rear approx. 1,800mm long, approx. 650mm wide and 150mm deep 2 pairs of lashing holes, each 5t, in the excavator arm trough, on the longitudinal frame approx. 300mm from the front and approx. 200mm before the rear taper Spare wheel bracket for 1 spare wheel, upright on the gooseneck, front center, spare wheel brand same as main equipment, steel rim Toolbox let into the floor on the gooseneck with lid, W=720mm / L=520mm / D=170mm 1st pair of wheel recesses after the gooseneck, let into the deep deck in the driving lane, chamfered for access, length at the bottom approx. 1,600mm, approx. 400mm deep. Note! Frame in the main beam area 400mm higher than the wheel recess. 2nd pair of wheel recesses between the axles, let into the deep deck in the driving lane, chamfered for access, length at the bottom approx. 600mm, approx. 300mm deep. Note! Frame in the main beam area 300mm higher than the wheel recess. Extensions retractable to 3,000mm (no extension at the rear taper and not in the wheel recesses below) (track width of machines or vehicles to be transported must not exceed the outer frame width of 2,550mm) Storage compartment for timber planks underneath the low-bed deck 70mm timber planks for extension to 3,000mm Lashing points – low-bed trailer 1 pair of RIN lashing rings inlaid at the front on the gooseneck, each 5t 4 pairs of lashing holes in the outer frame, each 5t (for securing strap attachments) 8 pairs of lashing mushrooms flush-mounted top and side in the outer frame, each 10t 2 at the front on the gooseneck 6 in the deep deck First lashing ring 250mm from the front, last a maximum of 250mm from the rear, spacing between lashing rings not more than 1,100mm 5 pairs of stake pockets inlaid in the outer frame, inner dimensions 70 x 40mm (convertible to 5t ring lashing eyes, not included) 1 pair of foldable lashing rings additionally inlaid in the floor, each 10t 1 inside next to main frame at start of low-bed section 2 pairs of additional foldable lashing rings, each 10t 1 on the gooseneck (protrudes) 1 behind the last axle inlaid in the floor Towing device for turntable trailer Drawbar with certified 50mm towing eye, towing eye inclined by 8° D-value at least 160kN Axles and Suspension BPW drum braked axles "Axles/chassis laser aligned" – reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bushings and mechanical front axle load equalization (rocker equalizer) Wheels and Tires 235 / 75 R 17.5" Manufacturer’s choice, with M + S marking Steel rims in twin arrangement,

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT44003001078, empty load weight: 8,900 kg, maximum load weight: 31,100 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space width: 3,000 mm, total length: 11,940 mm, total width: 3,000 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, Year of construction: 2026, Equipment: center pivot plate, Note: archive photos! #Low-loader trailer chassis - Welded steel construction - Turntable with heavy-duty ball-bearing slewing ring - Folding rear supports - 2 wheel chocks with holders - Aluminium side underrun protection - Rear mud flaps across full width (not in combination with forklift mounting) - Half-shell mudguards on axles 1 + 2 with anti-spray mud flaps behind each axle - Anti-spray mud flaps in front of and behind axles 3 and 4 Dcsdpfx Aae Aavxdefop - Excavator arm recess from the rear axles to the rear end, approx. 1800 mm long, approx. 650 mm wide, approx. 150 mm deep - 2 pairs of lashing holes, 5 t each, in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm before the beavertail - 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable - Storage box recessed into the gooseneck floor with lid, W=720 mm / L=520 mm / D=170 mm - Extendable widening to 3000 mm (not in beavertail) - (Track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2550 mm) - Storage compartment for timber planks beneath the low-loading deck - 70 mm timber planks for widening to 3000 mm #Lashing points low-loader - 1 pair of lashing cut-outs recessed in the longitudinal beam at the front on the gooseneck, 10 t each - 4 pairs of lashing holes in the outer frame, 5 t each (for lashing straps) - 9 pairs of lashing mushrooms recessed on top and side of the outer frame, 10 t each - 3 additional pairs of folding lashing rings, 10 t each: 1 on the gooseneck, 1 at the start of the well deck recessed on the inside of the longitudinal beams, 1 behind the last axle recessed in the floor #Towing equipment turntable trailer - Drawbar with certified 50 mm towing eye - Spring-assisted drawbar height adjustment #Axles + suspension - Drum brake axles, manufacturer's choice - Laser-aligned axles/running gear: reduced tyre wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber bushings and mechanical axle load compensation front and rear #Wheels and tyres - 235/75 R 17.5" - Twin steel rims, factory silver - TPMS tyre pressure monitoring system per ECE R 141, display in towing vehicle via EBS #Braking system - 2-line compressed-air braking system - Spring-brake parking brake - 2 coupling heads at the front, protected against mix-up - 12-24 V EBS, electronic braking system with EBS connector at the front - Axle load detection via EBS CAN bus signal, for display in the driver's cab #Electrics - 12-24 V, LED multi-chamber lights, yellow LED side lighting, LED number plate lighting - Yellow LED side lighting coupled with the indicators (flashing side marker lights) - 2 white LED front position lights - 2 white/red LED rear outline marker lights - 2 x 7-pin plugs at the front, protected against mix-up - 1 LED rotating beacon with holder - 2 pairs of LED-illuminated warning boards, extendable to 3000 mm #Floor - Gooseneck at the front with steel/chequer plate covering, then approx. 70 mm softwood floor, steel/chequer plate in the wheel arch area - Beavertail with 70 mm softwood floor #Loading ramps - Steel ramps 3000 mm long, 750 mm wide, laterally adjustable - Additional ramp lock, folding at the bottom - Timber-covered - Hydraulically operated via the towing vehicle's PTO with throttle valve - Hydraulic connection with SVK plug NW 10/3

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2018, Equipment: ABS, Visit our website to view our full inventory with numerous additional photos and information available in multiple languages. SEL 8382 Fliegl ZPS180 Building materials transporter / Alloy wheels / 40 mm German registration First registration: 25.01.2018 Gross vehicle weight rating (kg): 18,000 Permissible total weight (kg): 18,000 Unladen weight (kg): 3,450 VIN: WFDFLT21801007501 Vehicle inspection due: 02.2026 / Safety test: 08.2026 TYRES AND AXLES: Tyres: 385/65 R 22.5 Axle configuration: 2 axles / SAF Air suspension Disc brakes Alloy wheels BODYWORK: Internal dimensions: Width (m): 2.49 Length (m): 6.90 Side panel height (m): 1.00 VEHICLE DOCUMENTS: Registration certificate part I (Schein) Registration certificate part II (Brief) M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosanski) L. OBODYNSKA Ukrainian/Українська, Russian/Русский We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Every effort has been made to ensure the accuracy of the information provided; however, we accept no liability for mistakes or omissions. We advise customers to consult the provided photos. All measurements are approximate values. Dcsdpfx Aasx Tmzzofep Our vehicles are sold strictly as-is in their current condition. We welcome our customers to visit us and inspect the vehicle in person. We also offer the opportunity for a test drive. Please note that the battery supplied with the vehicle is the one currently installed. If you would like a new battery, we are happy to provide pricing information.

Condition: used, machine/vehicle number: WFDFLT21802026297, empty load weight: 2,872 kg, maximum load weight: 15,128 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation! Fliegl ZWP 180 Standard – Specifications Chassis – Swap Body Turntable Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Removable guide rollers at the front and rear Swap Guard – swap body positioning guide, mounted in front of and behind each container locking point 4 container twist locks with heavy-duty outriggers on 20 ft base, suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Wheel chocks with holders Dcodpsi Ri Dzefx Aafsp Aluminium side underrun protection Side underrun protection positioned further inwards for optimum clearance to swap body support legs Steel rear underrun protection Shortened underrun protection for optimum clearance to swap body support legs Protected installation of the lighting system Quarter fenders at the front and half fenders at the rear Without rear impact protection Spare wheel holder in basket design Plastic toolbox Drawbar Drawbar length: 2,200 mm Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment Axles & Suspension SAF disc brake axles with 430 mm brake discs Laser-measured axles/chassis alignment to reduce tyre wear and fuel consumption Air suspension Braking System Dual-line air brake system Colour-coded brake lines for easier servicing Air reservoir capacity: 208 litres Spring parking brake Two colour-coded front coupling heads with connecting lines to tractor unit EBS electronic braking system with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure ABS functionality Raise/lower valve with holding function in both raised and lowered positions Brake release function via push button on the vehicle next to the raise/lower valve, allowing brake release when coupled (EBS power supply must be ensured) Electrical System 24 V electrical system Multi-chamber lights Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Additional LED work light at the rear, activated via reverse light LED work light mounted centrally between the chassis beams at the front, illuminating to the rear, activated via reverse light Registration & Equipment Country of registration: Germany DEKRA inspection and approval according to §13 EG-FGV Prepared for single-line licence plate holder Warning board according to ECE R70 Foldable ADR warning board at the rear ECE R48 contour marking with white reflective strips on the sides and red reflective strips at the rear Attention: The pictures shown are archive images. The vehicle may still be in operation!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,500 kg, maximum load weight: 15,500 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space width: 2,520 mm, loading space height: 890 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-Tailored Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. More Information Chassis Steel welded construction Turntable with heavy-duty ball bearing Foldable rear support 2 outrigger plates with holder Aluminum side impact protection Splash guards at the rear, covering the entire width Semi-elliptical fenders for 1st and 2nd axles with anti-spray splash guards behind each axle, anti-spray splash guards in front of and behind the 3rd and 4th axles Excavator arm recess starting above the rear axles and extending to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points, each 5 tons, in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope. 1 plastic toolbox with insert, w=620/h=360/d=440 mm, lockable with a padlock (lock not included). 1 storage box recessed into the gooseneck with a cover, W=720 mm / L=520 mm / D=170 mm Extendable widening sections to 3,000 mm Wooden planks, 70 mm, for widening to 3,000 mm Storage compartment for wooden planks under the loading area Lashing points for low-bed trailers (40 lashing options) 1 pair of lashing points on the gooseneck, each 5 tons 9 pairs of lashing eyes recessed on the top and side of the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of lashing points in the outer frame of the low bed, each 5 tons (tie-down strap attachment) 3 pairs of folding lashing points, each 10 tons 1 x inside next to the main frame at the beginning of the low bed 1 x on the gooseneck (overhanging) 1 x behind the last axle, recessed into the floor Coupling device, trailer turntable Tow hitch with tested 50 mm drawbar eye, drawbar eye inclined 8°, D-value min. 160 kN Axles + Suspension Drum brake axles Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization at the front and rear (rocker arm equalization) Wheels and Tires 235 / 75 R 17.5, according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit ABS and ALB, with ABS connector at the front, with connecting cable Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning panels, double LED illuminated and extendable to 3,000 mm Floor Gooseneck at the front with steel/diamond plate covering followed by 70 mm soft wood flooring, steel/diamond plate covering in the wheel arch area Dcodpfji Ri A Sjx Aafop Rear slope with 70 mm soft wood flooring Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable covered with wood with spring-assisted support Country of Registration/Signs Country of Registration: Germany 24/7 service hotline prepared for license plate holder, two lines Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Warning sign according to ECE - 70 Paintwork Frame hot-dip galvanized including passivation, 15-year

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,250 kg, maximum load weight: 14,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 1,250 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with central-axle trailer Dsdozd Udcjpfx Aafscp Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy 20"-based arms for 7.15 m, 7.45 m, and 7.82 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) 1 pair of front transmission support legs, with straight lower section and single-side operation on the right rear 1 pair of transmission support legs at the rear, with straight lower section and single-side operation on the right side 2 wheel chocks with holders Aluminum side impact protection Side impact protection set inward, for optimal clearance to the swap body supports Steel underrun protection Rear mud flaps across the entire width Half-shell fenders Mud flaps *Towing Equipment for Central-Axle Trailers Towing beam with certified 50 mm tow eye, freight carrier version Flat flange plate for tractors with a clearance-type low-bed trailer, connected to the towing beam at the top and bottom Towing beam clamped/bolted, easily replaceable, and partially adjustable in length! Lower coupler drawbar, free drawbar length approx. 2200 mm Fold-down bracket with spring assistance on the drawbar, for routing the connection cables to the truck *Axles + Suspension BPW disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake system 2-line compressed air brake system Color-coded wiring for easy servicing. Air reservoir: 208 liters Air-spring parking brake, Control panel at the rear right Duomatic connection at the front, with connecting line to the tractor unit, connection at the rear right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection at the rear right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift and lower valve, hold function in both lower and lift positions Vehicle - Vehicle Stability Control System *Wheels and Tires 385/65 R22.5" Manufacturer's choice Steel rims, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting Connectors for electrical and air connections on the drawbar 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection at FR-right 2 additional LED work lights, recessed and integrated into the rear, activated via the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of Registration/License Plates Germany With DEKRA approval and certification (per §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Warning sign per ECE - 70 Night parking sign front and rear Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted according to customer specifications

Condition: new, maximum load weight: 31,920 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 10,410 mm, loading space width: 2,500 mm, loading space height: 900 mm, total width: 2,550 mm, New Fliegl 4-Axle Lowbed Trailer with Ramps, Model VTS 400 Gross weight: 24,000 kg / 40,000 kg Unladen weight: 8,080 kg Payload: 15,920 kg / 31,920 kg Total length: 11,940 mm Loading length: approx. 10,410 mm total, gooseneck approx. 2,490 mm, loading platform incl. rear chamfer approx. 7,920 mm Width: 2,550 mm Loading height: 900 mm Additional information: Plus delivery/preparation ex stock 26639 Wiesmoor €1,280.00 net Chassis - Lowbed Trailer Steel welded construction Turntable with heavy-duty ball bearing slewing ring Foldable rear supports 2 wheel chocks with holders Side underrun protection - aluminum Full-width rear mudflap Half-shell fenders on 1st and 2nd axles with anti-spray flaps behind each axle Anti-spray flaps in front of and behind 3rd and 4th axles Excavator arm recess above the rear axles extending to the rear, approx. 1,800 mm long, approx. 650 mm wide, approx. 150 mm deep 2 pairs of lashing holes (5 t rating each) in the excavator recess, on the longitudinal frame approx. 300 mm from the front and approx. 200 mm before the rear chamfer 1 plastic toolbox (W=600 mm, H=425 mm, D=460 mm), lockable Storage box flush-mounted in floor on the gooseneck, with lid (W=720 mm, L=520 mm, D=170 mm) Extendable widening beams to 3,000 mm (not at rear chamfer) (Note: Maximum track width of construction machines or vehicles must not exceed outer frame width of 2,550 mm) Stowage compartment for wooden planks under the lowbed deck Wooden planks 70 mm wide for extension to 3,000 mm Lashing points - Lowbed 1 pair of recessed lashing cutouts in front longitudinal beam on gooseneck, each rated 10 t 4 pairs of lashing holes in outer frame, each rated 5 t (for attaching tie-down straps) 9 pairs of lashing pins installed flush on top and side of outer frame, each rated 10 t 2 x front on gooseneck 7 x in the lowbed First lashing point 250 mm from front, last max. 250 mm from rear, distance between points no greater than 1,100 mm Dcedpfoxrx Nlex Aafsp 3 additional pairs of folding lashing rings, each rated 10 t: 1 x on gooseneck (protruding) 1 x at the start of the lowbed, inset into the longitudinal beams 1 x recessed in floor behind the last axle Towing Arrangement – Turntable Trailer Drawbar with certified 50 mm towing eye Drawbar height adjustable via spring Axles & Suspension Drum brake axles, manufacturer’s choice "Axle/chassis laser alignment" for minimizing tire wear and fuel consumption Air suspension with raise/lower valve and auto-reset function Wheels & Tires 235/75 R 17.5", manufacturer’s choice Steel rims with twin arrangement, factory silver Brake System 2-line compressed air brake system Spring-applied parking brake Axle load detection via EBS CAN bus signal for display in the truck cab (truck must be pre-equipped; not a calibrated scale) Vehicle – Driving Stability System 2 foolproof coupling heads at front with connecting lines to tractor unit 12-24 Volt EBS, electronic braking system with EBS plug at the front and connection cable (Knorr brand) Note: The towed trailer may only be towed by tractors that guarantee the effectiveness of the ABS! Electrical System 12-24 Volt, multi-chamber LED lights, side yellow LED lighting, LED license plate lighting (Note: Certain tractor units may indicate malfunctions even if all functions are working) 2 white LED position lights at front 2 white/red LED lane marker lights at rear 2 x 7-pin foolproof connectors at front with connection cable 1 LED beacon with holder (switchable via parking lights; lamp removable)

Condition: used, maximum load weight: 2,300 kg, overall weight: 3,000 kg, axle configuration: 2 axles, first registration: 06/2015, Ref. No.: B - 06 On behalf of customer Fliegl * TTS 30-30 * Low-bed trailer Djdpoxvf U Nsfx Aafecp * Ramps * 2-axle * Permissible total weight 3000kg * Very good condition, little used Trade-in possible Financing starting at 3.99% Errors and prior sale excepted! The information in this advertisement is non-binding descriptions and does not constitute guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Stated features should be checked separately. All details in the ads are non-binding! Nationwide delivery within Germany available upon request. Opening hours: Monday to Thursday from 9:00 am to 5:00 pm Friday from 9:00 am to 2:00 pm and by appointment!

Condition: used, empty load weight: 6,075 kg, maximum load weight: 28,925 kg, overall weight: 35,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5, color: red, Year of construction: 2023, Equipment: ABS, Color: RAL 3002 Carmine Red Front/rear panel: Purple / white Extension ladder at the rear, door latch on the side Support wedges with holder, aluminum side impact protection, galvanized steel underride protection, quarter panel fenders in front of the 1st axle and behind each axle, with anti-spray flaps behind each axle, rear impact protection, Pallet stop on both sides, approximately 15-20 mm high, in a bolted design, loading height is reduced by approximately 15-20 mm, plastic toolbox Axles + Suspension SAF disc brake axles, "axle/chassis laser measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and starting assistance, Activation via "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no warranty for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing, spring brake parking brake, 2 fail-safe coupling heads in front, without connecting line, EBS, electronic braking system with EBS socket in front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm (in Mega Flex only at low ride height or saddle height), vehicle - driving stability system Wheels and tires 435/50 R19.5", manufacturer's choice, steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights in front 2 white/red marker lights at the rear, 2 x 7-pole and 1 x 15-pole fail-safe sockets in front Floor Sieve-printed panels approximately 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / corner posts 2,580 mm high, corner posts steel in volume design, release device for side tarpaulin on front wall, "Crash-Blocker," bottom inside at approximately 140 mm height with steel impact protection Intermediate supports 3 pairs of sliding supports, fully adjustable in length, with 4-fold insertion pockets and a long pocket at the bottom, 3 pairs of support positions Insertion slats 5 rows of wooden insertion slats Rear wall / corner posts Corner posts at the rear, steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal rotary rod locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Fliegl sliding roof, sliding cover, end lift at the rear that can be folded up, with a cover that can be slid from back to front, L-shaped roof beam for the automotive industry, inner width between the roof beams approximately 2,490 mm, tarpaulin color: white, roof non-elastic, little deflection of the roof beam during loading and unloading, EcoLift - lifting roof can be raised by approximately 380 mm, on both sides, with gas spring support, 3 driving positions in the front: interior height in the front approximately 2900mm/ 2950 mm / 3000 mm Optimal rain strip at the rear, on top of the end rail, above the doors Dcodpfezun I Aex Aafep Fliegl manufacturer certificate for body strength according to EN 12642 XL, Fliegl manufacturer certificate for body strength accor

Condition: used, empty load weight: 3,140 kg, maximum load weight: 14,860 kg, overall weight: 18,000 kg, first registration: 07/2022, total width: 2,550 mm, Equipment: ABS, EBS, electronic stability program (ESP), Key Features Internal Reference: 25317M Chassis Number: WFD FLT 218 Serial Number: 413.869.006 Dcsdpfxez Hp S Rj Aafsp Vehicle Model: TWP 180 BDF / Swiss-Vehicle Vehicle Brand: Fliegl Product Category: Interchangeable Chassis Condition: Used Date of First Registration: 07/08/2022 Last Roadworthiness Test (MFK or TÜV): 05/12/2023 Suspension: Air-Air Cab Vehicle Equipment: ABS, EBS, ESP Axles & Tires Axle 1: 385 / 55 R 22.5/14mm, Air Suspension Axle 2: 385 / 55 R 22.5/11mm, Disc Brakes, Air Suspension Number of Axles: 2 Weights & Dimensions Total Weight: 18000 Payload: 14860 Unladen Weight: 3140 Vehicle Width: 2550 Body Body Model: BDF Body Year of Manufacture: 2022

Condition: used, empty load weight: 8,940 kg, maximum load weight: 31,060 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 03/2026, loading space length: 10,250 mm, loading space width: 2,520 mm, loading space height: 930 mm, suspension: air, tire size: 235/75R17.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 4 axles, turntable, air suspension, ABS (anti-lock braking system), can be widened to 3m, lashing eyes, hydraulic ramps, rear support, side aluminum wheel guards, twin tires, wheel recesses. Superstructure: 4-axle low-bed trailer with wheel recesses, excavator arm recess, and hydraulic ramps. Galvanized, 4x 10t axle, drum brakes, technically permissible total weight 40,000 kg, can be widened to 3000mm! Length of upper platform approx. 2800mm! Length of lower platform approx. 7450mm! Ramp length approx. 2900mm! Loading height of front wheel recess approx. 550mm! Loading height of rear wheel recess approx. 620mm! Length of front wheel recess approx. 1600mm! Length of rear wheel recess approx. 600mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Dcsdpfx Ajzr Rmisafep

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,700 kg, maximum load weight: 21,300 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,520 mm, total length: 11,425 mm, total width: 2,550 mm, total height: 900 mm, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Year of construction: 2026, Tailor-made transport solution Configure your Fliegl vehicle to your requirements. The vehicle shown is an example. Production and specification are customised to customer requirements. #Low Loader Drawbar Trailer Chassis Welded steel construction 1st pair of recessed wheel wells in track area 2nd pair of recessed wheel wells between axles in track area Removable wheel well covers with steel inserts Turntable with heavy-duty ball race, recessed storage box in front section Hydraulic rear support legs Aluminium storage box with stainless steel lid, W 600/H 400/D 500 mm Extendable outriggers to 3,000 mm at wheel well extensions Central storage compartment for timber planks 70 mm timber planks for 3,000 mm extension Climbing strips on outer rear bevel frame #Lashing Points Low Loader 3 pairs of 10 t recessed lashing points in front floor 6 pairs of recessed 10 t mushroom lashing points in top and side outer frame Combined stake pockets with bolted ring lashing eyes, 5 t each, recessed in outer frame, approx. 72 x 42 mm internal size Additional recessed folding lashing rings in low loader deck, 10 t each #Drawbar Equipment Cranked drawbar #Axles + Suspension Drum brake axles, manufacturer's choice "Achsen-/Fahrwerk laservermessen" reduces tyre wear and fuel consumption #Braking System Twin-line air brake system Colour-coded pipe routing for easy servicing Spring parking brake Front Duomatic coupling with connection line to towing vehicle 24 V ABS and ALB with front ABS plug and connection cable #Wheels and Tyres 235/75 R 17.5 steel wheels, twin fitment, factory silver #Electrical System 12–24 V LED multi-chamber lights, side yellow LED lights, LED number plate light 2 front white LED position lights 2 rear white/red LED outline marker lights 1 x 15-pin front plug with connection cable 1 x 7-pin agricultural plug For use with 12/24 V LED lighting Additional rear LED work lights LED beacon with bracket 2 pairs of illuminated LED warning boards, extendable to 3,000 mm #Floor Front steel floor, followed by approx. 70 mm softwood floor Rear bevel with 70 mm softwood floor Low loader deck incl. rear bevel: 9,000 mm #Loading Ramps Climbing strips on ramp outer frame Timber-covered Hydraulic operation via PTO with flow control, left-hand side operation in direction of travel Individually controlled hydraulic side shift of loading ramps (only with hydraulic ramp operation) Hydraulic connection with SVK plug NW 10/3 incl. connecting hose #Registration / Plates Complete combination approval report for §70 permit application for one towing vehicle upon collection from Triptis (observe max. permitted gross combination weight in truck documents; apply for uprating in advance if required; approval is at the truck manufacturer's discretion. Any resulting costs will be charged separately) 24/7 service hotline Dcodpfx Aasznux Iofjp Prepared for two-line number plate holder Reflective contour markings to ECE R 048, white sides, red rear

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Dedpfxjzggghe Aafjcp Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Trailer for Roll-Off Containers * High-tensile steel welded chassis construction * Sliding frame system: * The container is loaded from the rear onto the sliding frame and pushed forward * Front container stop adjustable for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for the transport of roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Rear impact protection, mounted vertically on left and right side, with delta rubber buffers on underrun protection brackets * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: opening the container locking system automatically activates the spring-loaded parking brake * Vehicle Stability Control System * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 additional LED work lights at the rear, activated via reverse gear * 2 x 7-pin non-interchangeable front plugs with connecting cable ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: used, maximum load weight: 8,470 kg, overall weight: 11,800 kg, axle configuration: 2 axles, first registration: 06/2018, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 900 mm, total width: 2,550 mm, Gross weight: 11,800 kg Unladen weight: 3,330 kg Payload: 8,470 kg Overall length: 6,950 mm Loading length: 5,000 mm Width: 2,550 mm / loading width approx. 2,420 mm Loading height: approx. 950 mm Further information: - Front support leg - Rear support, foldable - 450 mm drop sides - Large lashing package - Frame hot-dip galvanized incl. passivation Dcedpfx Aasy Arkaefsp - Loading ramps optional: €1,280.00

Condition: used, overall weight: 12,000 kg, axle configuration: 2 axles, first registration: 10/1998, Equipment: ABS, Fliegl TPW 180 BDF interchangeable chassis, SAF axles Internal number for inquiries: 1026878 * Condition: very good * Year of manufacture: 1998 * ABS * EBS * SAF axles * 2-axle, air-suspended * Underrun protection, aluminum Tires: * Front axle: 385 / 65 R 22.5, air-suspended / 70% * Rear axle: 385 / 65 R 22.5, air-suspended / 70% ----Price: EUR 4,900 + 19% VAT For further questions, you can reach us on the following telephone numbers: We speak: German, English, French, and...? Dsdpfx Ao Aat T Soafscp Typographical errors, errors and prior sale excepted.

Condition: used, maximum load weight: 6,580 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 11/2020, next inspection (TÜV): 03/2027, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 2,400 mm, total width: 2,550 mm, total height: 3,700 mm, ° Central axle trailer ° Chassis manufacturer: FLIEGL ° Curtain body with hoops ° Doors at front and rear (through-loader) ° 2 locks per door ° Sliding curtain on both sides ° Sliding roof ° 3-part aluminium slats ° Pallet stop rails ° Tyres: 235/75R17.5 143J ° Height-adjustable drawbar ° Reinforced cargo floor Djdpfx Aez Nbpgjafjcp ° Lift/lower function ° Coupling heads red and yellow ° 24 Volt 15-pin lighting plug ° EBS connector ° Vehicle has normal signs of use

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,950 kg, maximum load weight: 15,050 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,080 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Fliegl “V-Stream” frame Front stop, longitudinally adjustable and foldable Pair of removable guide rollers, front and rear 4 container locks with sturdy arms based on 20" dimensions for 7.15 m and 7.45 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) Note! Not suitable for 20" containers, or only possible if the container has a tunnel or opening at the front center measuring approx. 200 mm in length and 800 mm in width! Swivel mount with heavy-duty ball bearing swivel ring Wheel chocks with holders Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Quarter-shell fenders in front and half-shell fenders in the rear Includes mud flaps for fenders Large Fliegl mud flap mounted transversely on the underrun protection at the rear *Trailer coupling system (turntable) Drawbar with certified 40 mm drawbar eye *Axles + Suspension SAF disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy maintenance. Air reservoir capacity: 208 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lift & lower valve + auto-reset function Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly Dodpfezfp S Dsx Aafscp “TPMS” tire pressure monitoring system according to ECE R 141, display in the towing vehicle via EBS *Wheels and tires 445/45 R19.5", brand selected by the manufacturer Steel rims, factory silver *Electrical system 24 volts, multi-chamber lights, yellow LED side lighting Yellow LED side lighting linked to the turn signals “Flashing side lights” 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, additional LED work light(s) at the rear, activated via the reverse light LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of registration/license plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Chassis galvanized or painted in colour of choice

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 14,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,970 mm, total width: 2,550 mm, total height: 1,250 mm, suspension: air, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis for central-axle trailer Fine-grained steel welded construction Front stop, transverse, in a foldable/adjustable design, as previously delivered with AU 257359 1 pair of removable guide rollers, front and rear 1 additional pair of removable guide rollers 4 container locks with sturdy arms based on 20" for swap bodies 7.45 m and 7.82 m 1 pair of front transmission support legs, with straight lower section and single-side operation on the right side 1 pair of rear transmission support legs, with straight lower section and single-side operation on the right side (FR) Side impact protection set inward, for optimal clearance to the swap body supports Steel underrun protection *Towing equipment for central-axle trailers Dcsdpfezd U I Ujx Aafop Towing beam with certified 50 mm tow eye, freight forwarding version Flat flange plate for tractors with underrun-protected LBW, connected to the drawbar at the top and bottom Drawbar clamped/bolted, easily replaceable and partially adjustable in length! Under-coupler drawbar, free drawbar length approx. 2150 mm Folding bracket with spring support on the drawbar, for routing the connection cables to the truck *Axles + Suspension SAF or BPW disc brake axles “Laser-aligned axles/chassis” reduces tire wear and fuel consumption Travel odometer/odometer Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Air reservoir: 208 liters Spring-loaded parking brake, Control panel in the front right Duomatic connection at the front, with connecting line to the tractor unit, connection in the front right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection in the front right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve, hold function in both lower and lift positions Vehicle – Vehicle Stability Control System Brake release function via a pushbutton on the vehicle next to the lift & lower valve, for releasing the brake when coupled; EBS power supply must be ensured! “TPMS” Tire Pressure Monitoring System according to ECE R 141, display in the towing vehicle via EBS *Wheels and Tires 385/65 R22.5" steel rims, factory silver *Electrical System 24 volts, multi-chamber LED lights, yellow LED side lights, LED license plate lights, (Note: With certain towing vehicles, false diagnostic errors may occur even though the system is functioning properly) Yellow LED side lights linked to the turn signals “Flashing side lights” Parking sockets for electrical and air connections on the drawbar 2 white LED front position lights 2 white/red LED rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, located on the right rear 2 additional LED work lights, recessed and integrated into the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Prepared for single-line license plate holder Night parking sign at front and rear *Paint Finish Frame Hot-dip galvanized or painted according to customer preference

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Dcedpfx Aezfp Uxoafjp Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm), towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Braking System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly *Wheels and Tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting (Note: With certain towing vehicles, false diagnostics may occur even though the function is working properly) 2 white LED front position lights 2 white/red LED rear lane-keeping lights 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated via reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration / License Plates Germany With DEKRA inspection and certification (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holders Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Hot-dip galvanized frame, including passivation “15-year warranty against rust-through” Drawbar: galvanized or black, at the manufacturer’s discretion Customized transport solution

Condition: used, empty load weight: 3,500 kg, maximum load weight: 14,500 kg, overall weight: 18,000 kg, first registration: 09/2016, next inspection (TÜV): 09/2024, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 1,200 mm, loading space volume: 19 m³, suspension: air, tire size: 385/55R22,5 160J, color: other, gearing type: other, front tire size: 385/55R22,5 160J, rear tire size: 385/55R22,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Sales contact: Frank Rau / Russian / English / German - Bachar Ibrahim / Arabic / English / German - Registration service, MOT/technical inspection/safety inspection, transport to the port Light gray Additional features: Dsdeww Dzgspfx Aafecp ABS, turntable, air brake, EBS, air suspension, disc brake, suspension: air-air, payload (kg): 14500 Body type: Fliegl ZPS 180, year of manufacture 2016, construction trailer, flatbed, BPW axles, HSN/TSN: 7951/000 Errors and omissions excepted.

Condition: used, maximum load weight: 13,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2021, next inspection (TÜV): 02/2027, loading space length: 5,200 mm, loading space width: 2,400 mm, loading space height: 600 mm, Year of construction: 2021, Equipment: ABS, Well-maintained and rarely used three-sided tipper with a low-loader design. Features: Combination door and hinged flap at the rear Spring-assisted lifting mechanism on the side walls Side walls with hinged support Dcedjznhr Ispfx Aafsp Aluminum access ramps stored under the tipper Numerous lashing points Tire condition: approx. 70% Please call for any questions regarding the equipment. Errors and prior sale excepted!

Condition: new, maximum load weight: 23,890 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Vehicle from current production NEW VEHICLE Fliegl 3-axle low-loader, type DTS 300, hot-dip galvanized Dsdpek N Adksfx Aafocp Total weight 24,000 kg / 30,000 kg Payload 17,890 kg / 23,890 kg Unladen weight 6,080 kg Overall length 10,900 mm Loading length 8,680 mm Loading bed 6,500 mm incl. 900 mm approach ramp Loading height 860 mm Air suspension with raising and lowering valve Long ramps 2,800 mm with hydraulic operation Extensions to 3,000 mm with warning signs and rotating beacon Large lashing kit with 5.0 and 10.0 ton lashing points 5 pairs of stake pockets Drawbar eye 40 mm plus pre-carriage / preparation costs from storage location Wiesmoor 1,280.00 € / net Lease-purchase offer: Term 48 months, residual value 40%, down payment only the VAT. Monthly rate: EUR 609.00

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035389, empty load weight: 3,160 kg, maximum load weight: 34,840 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 90 %, color: grey, The images are archive images! The vehicle may still be in use! Fine-grained steel welded construction, fifth wheel coupling with interchangeable 2" kingpin (Chassis prepared for subsequent retrofitting, drip tray, 4 x hose holders, footboards, Fliegl standard) Container fittings: 1 x 20 ft in the center (or swap body container 7.15 / 7.45 / 7.82), not retractable at the front, the pivot pins of the container locking mechanism in the longer version. 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Chocks with holder Side underrun protection Rear underrun protection with deep step for easier access + footboard inside Djdpfx Aey Tvuwoafscp Semi-elliptical fenders with anti-spray flaps according to EC Axles + Suspension BPW or SAF disc brake axles at the manufacturer's choice, with 430 mm disc diameter, "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, the truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5" manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, (Note! with certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable additional LED work lights at the rear, switched via reversing light Operating instructions This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration/Signage Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side, yellow at the rear The images are archive images! The vehicle may still be in use!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm); towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Brake System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lower and raise positions Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation (no calibrated scale) Tire pressure monitoring system *Wheels and tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, Aspöck Eco LED II multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting, (Note: With certain towing vehicles, false diagnostics may occur even though the system is functioning properly) 2 white LED front position lights 2 white/red rear lane-keeping lights (LED) 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated by the reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the crossbars, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Germany Djdszd Uvlepfx Aafscp with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holders Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint Finish Frame hot-dip galvanized or painted according to customer preference

Condition: used, Year of construction: 2025, Disc brakes, air suspension, ABS, EBS 3-axle 3-axle sliding floor semi-trailer, type SDS 390/101 X-tra Long - Permissible/technical total weight: 35000/39000 kg - Permissible/technical payload: approx. 27148/31148 kg - Permissible/technical aggregate load: 24000/27000 kg - Permissible/technical fifth-wheel load: 11000/12000 kg - Tare weight (base version): approx. 7852 kg +/- manufacturing tolerance - Overall length: approx. 15350 mm - Overall width max.: 2550 mm - Overall height: approx. 4005 mm - Internal length: approx. 14905 mm - Internal width: approx. 2470 mm - Internal height front: approx. 2655 mm - Internal height rear: approx. 2853 mm - Volume: approx. 101 cbm - Fifth wheel height: approx. 1130 mm - Kingpin mounting dimension: approx. 1640 mm Dsdpoz Np N Aofx Aafscp - Front corner dimension: approx. 2040 mm Trailer chassis: - Fine-grained steel welded construction in lightweight design, up to the support legs - Fifth wheel with interchangeable 2" kingpin Tires (front): 385/55R22.5, Tires (rear): 385/55R22.5 = Further information = Year of manufacture: 2025 Tare weight: 35,000 kg General condition: good Technical condition: good Optical condition: good Please contact Ria Lange for more information.