Used Fliegl Twp Trailers for sale (340)

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33502014693, empty load weight: 6,300 kg, maximum load weight: 28,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r19,5, tire condition: 100 %, Further information: Fine-grained steel welded construction, drawbar with 2 replaceable kingpins, 14 pairs of lashing eyes recessed in the outer frame, each with a capacity of 2.5 tons, outer frame with Load-Lock profile for attaching lashing straps. Note: Not suitable for use with sideboards! 24-ton, two-stage support winch, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation. 2-stage extension ladder at the rear, door retainer on the side, chocks with holder, aluminum side impact protection, galvanized steel underrun protection, partial wheel arches in front of the 1st axle and behind each axle, with anti-splash flaps behind each axle, rear impact protection, spare wheel holder for 1 spare wheel, with wheel fastening kit, plastic toolbox. SAF disc brake axles, air suspension. 2-line compressed air braking system, spring brake parking brake, 2 tamper-proof coupling heads at the front, without connecting line, EBS, electronic braking system with EBS socket at the front, without connecting cable. Attention: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! With lift and lower valve, vehicle stability system, tire pressure monitoring system TPMS Haldex, in conjunction with the info center. 24 volts, multi-chamber lights in LED, yellow LED lighting on the side, 2 white position lights at the front in LED, 2 white/red side marker lights at the rear in LED, 2 x 7-pole tamper-proof sockets at the front, without connecting cable, LED safelight, at the top in corner posts at the rear. Floor: Sieve-printed panels approx. 30 mm thick, cross members with omega inserts, on longitudinal girders for high point load capacity for forklift axle load up to max. 7100 kg. Front wall/corner posts at the front: 2,600 mm high, corner posts made of steel in a full-volume design, release mechanism for side tarpaulin on the front wall, at the bottom inside at a height of approx. 140 mm with steel impact protection. Blsdjkyrlzopfx Aarji Side rails: 5 pieces of sliding rails that can be moved along the entire length, with 4-fold insertion pockets and at the bottom with a long pocket (3 x on the right side and 2 x on the left side), 5 pieces of rail positions (3 x on the right side and 2 x on the left side), aluminum insertion strips. Corner posts at the rear: steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-wing with 2 internal rotary latch locks each. Tarpaulin with welded-in horizontal and vertical straps, reinforcements for side rails. Quick Lock system for side tarpaulin with central lock, on one side on the left, tensioning devices made of stainless steel on the right, tarpaulin with recessed vertical slats as a load securing tarpaulin, on one side on the left (then only 2 pairs of side rails on the left). Roof: Sliding tarpaulin, end lift at the rear that can be folded up, with the tarpaulin sliding from the back to the front, L-shaped roof beam for the automotive industry, internal width between the roof beams approx. 2,490 mm, tarpaulin color: white, liftable roof, mechanically liftable by approx. 380 mm, liftable roof for opening with the doors closed. Country of registration: Germany, type approval according to EG 2007/46, load securing certificate according to EN 12642 XL, 24/7 service hotline, prepared for single-line license plate holder, warning sign according to ECE - 70, refl

Condition: used, machine/vehicle number: WFDFLT33502019721, empty load weight: 6,927 kg, maximum load weight: 28,073 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 07/2016, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,040 mm, suspension: air, tire size: 385/55 r19,5, Fine-grain steel welded construction, kingpin assembly with two replaceable kingpins. Note: With a frame neck height of 30 mm, the truck wheelbase must not exceed 3700 mm! Outer frame slightly angled with load-lock profile for attaching lashing straps. Note: To attach the straps in conjunction with side walls, the side walls must be opened! Not in the neck area! 10 pairs of lashing eyes recessed into the outer frame, each with a capacity of 2.5 tons. Outer frame with load-lock profile for attaching lashing straps. Note: Not usable with side walls! 24 tons. Two-stage support jacks, single-sided operation, with a straight lower section, without thrust compensation, folding supports at the front, extending outwards and folding downwards in front of the front wall. Retracted as far as possible inwards in the driving position (for uncoupling under load), without supports, extension ladder at the rear, door lock on the side, shims with holder, aluminum side impact protection, galvanized steel underrun protection, quarter panel fenders in front of the first axle and behind each axle, with anti-splash flaps behind each axle, rear impact protection. Heavy-duty rear impact protection beam, pallet stop in heavy-duty design on both sides, approximately 20-25 mm high, with lashing capability every 200 mm, loading height reduced by approximately 20-25 mm, plastic tool box. SAF disc brake axles, air suspension, without lift axle. Two-line compressed air brake system, spring brake parking brake, 2 non-interchangeable coupling heads at the front, without connection line, EBS, electronic braking system with EBS socket at the front, without connection cable. Attention: The trailer may only be pulled by tractor units which ensure the effectiveness of the ABS! With raise and lower valve, vehicle - driving stability system. 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front. 2 white/red marker lights at the rear, 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front, without connection cable. Floor: Front area with steel floor and anti-slip coating, plywood panels approximately 30 mm thick, crossbars with omega insert, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg, in the wheel area steel/diamond plate covering. Front wall/corner posts: 2,580 mm high, corner posts made of steel in volume design, release mechanism for side tarpaulin on front wall, at the bottom inside at approximately 140 mm height with steel impact protection. Center posts: 3 pairs of sliding posts, slidable over the entire length, with 4-fold insertion pockets and a long pocket at the bottom, 3 pairs of post positions, aluminum insertion slats. Rear corner posts made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet, rear portal doors, 2-leaf with 2 internal swivel rod locks each. Bledpfskyrlwex Aarei Tarpaulin with welded-in horizontal and vertical straps, tensioning buckles made of stainless steel, customer lettering on rear portal. Roof: Sliding tarpaulin, rear end lift that folds up, with the tarpaulin slidable from back to front, L-shaped roof beam for the automotive industry, internal width between the roof beams approximately 2,490 mm, tarpaulin color: white, EcoLift - liftable roof, can be raised by approximately 380 mm, with gas spring support, anti-ice system, with one hose in the center, with automatic ventilation.

Condition: used, machine/vehicle number: WFDFLT23861001990, empty load weight: 45,900 kg, maximum load weight: 33,100 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total length: 9,800 mm, total width: 2,550 mm, suspension: air, tire size: 265/70 r19,5, tire condition: 100 %, color: red, Additional information: Former trade fair vehicle from 2006 – was used internally and therefore shows signs of wear! Bsdpfx Aaei Ri Hyorjli Side impact protection: Aluminum, from kingpin to the beginning of the side impact protection, 2,600 mm Under-run protection: Frame color, set as flush as possible with the end of the chassis and as far inward as possible Wheel chocks: 2 pieces with holder Ramp bumpers: 2 steel bumpers Paint: Sandblasted base, 2-component acrylic paint Rims: Factory silver Inspection: Includes DEKRA inspection

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902024321, empty load weight: 5,765 kg, maximum load weight: 29,235 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 10/2018, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: black, The pictures are archive pictures, the vehicle may still be in use! Equipment on request! Blodowk Dk Iepfx Aarji

Condition: used, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 11/2014, Year of construction: 2014, Equipment: ABS, Tipper with pump device 2x aluminum cabinets Pipe holder + pipes Bledpfxszfyiyj Aaroi 8x container mounts Drip tray Tread plate Good condition Input errors, amendments, mistakes, and prior sale excepted. The information given in our advertisements, online, on price tags, and in pictures constitutes non-binding descriptions and does not represent guaranteed characteristics. The seller assumes no liability for typing or data transmission errors.

Condition: used, empty load weight: 5,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 09/2018, total length: 2,550 mm, total height: 13,100 mm, suspension: air, tire size: 385/65R22,5, | Fliegl 30-foot tipping chassis | BPW axles | Lift axle | Alloy wheels | Top condition | Austrian vehicle Bljdpfx Aasyp Hd Hjroi

Condition: used, axle configuration: 3 axles, first registration: 03/2011, total length: 12,100 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55R22,5, wheelbase: 9,250 mm, color: other, Year of construction: 2011, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Payload: 36,200 kg, Tare weight: 5,800 kg, Gross vehicle weight: 42,000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Air suspension, EBS, 2X 20, 1X 30, 1X 40 FT HIGHCUBE // DISC BRAKES // LIFT AXLE = Further Information = General Information Cab: Day cab Registration number: OL-43-HP Drivetrain Fuel type: Diesel Transmission Gearbox: Manual transmission Axle Configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/55R22.5; Lift axle; Tire tread depth left: 5 mm; Tire tread depth right: 10 mm Axle 2: Tire size: 385/55R22.5; Tire tread depth left: 8 mm; Tire tread depth right: 10 mm Axle 3: Tire size: 385/65R22.5; Tire tread depth left: 2 mm; Tire tread depth right: 2 mm Weights Unladen weight: 5,800 kg Payload: 36,200 kg GVW: 42,000 kg Environment Emission class: Euro 0 Condition Overall condition: very poor Technical condition: very poor Optical condition: very poor Damage: none = Company Information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here you can choose from a constantly changing stock of 1,200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Blodpfx Aaoy U U R Hjrji Quickly calculate your leasing rate and submit an inquiry through our website. Inquire directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 05/2023, loading space length: 13,700 mm, loading space width: 2,400 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 435/50R19,5, wheelbase: 8,970 mm, color: other, Year of construction: 2023, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Payload: 32920 kg, Tare weight: 6080 kg, Gross vehicle weight: 39000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2023, Sunroof, Axle type: SAF = Further Information = General Information Cab: Day cab License plate: OX-71-GS Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 9 mm; Tire tread depth right: 9 mm Axle 2: Tire tread depth left: 10 mm; Tire tread depth right: 10 mm Axle 3: Tire tread depth left: 8 mm; Tire tread depth right: 7 mm Weights Tare weight: 6,080 kg Payload: 32,920 kg GVW: 39,000 kg Functional Sunroof: Yes Environment Emission class: Euro 0 Bodpfx Asy U Ut Uearsli Maintenance APK (Periodic Vehicle Inspection): valid until 11.2026 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Financial Information Leasing price: €334 per month (default, 60 months); Please inquire for further information and conditions = Company Information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large and rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Inquire directly about our European warranty package.

Condition: used, axle configuration: 3 axles, first registration: 06/2021, loading space length: 13,700 mm, loading space width: 2,400 mm, loading space height: 3,000 mm, total length: 13,900 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, tire size: 435/50R19,5, color: other, Year of construction: 2021, Equipment: ABS, = Additional Options and Accessories = - EBS = Notes = Number of axles: 3, Tare weight: 6060 kg, Gross vehicle weight: 39000 kg, Chassis type: Complete chassis, Chassis material: Steel, Kingpin size: 2 inch, Suspension type: Air suspension, ABS, EBS, Body construction year: 2021, Side wall material: Tarpaulin, Sliding roof, Axle type: SAF = Additional Information = General Information Cabin: Day cab Registration number: KLEYN1 Drivetrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle Configuration Tire size: 435/50R19.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 5 mm; Tire tread depth right: 6 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 8 mm Blsdpfxjy U Utzs Aarsi Axle 3: Tire tread depth left: 5 mm; Tire tread depth right: 5 mm Weights Unladen weight: 6,060 kg Payload: 32,940 kg GVW: 39,000 kg Functional Sliding roof: Yes Environment Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Financial Information Leasing price: 315 € per month (default, 60 months); Ask for more information and conditions = Company Information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands across different years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 13,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 11,400 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further information Chassis Steel welded construction, with slight preload in the center, turntable with robust ball bearing race, support wedges with holder, quarter-shell fenders in front of and behind each axle. Tie-down points, low-bed trailer: above the front axle: 2 pairs of ring tie-down points, each 5 tons, at the front on the outrigger low-bed: 4 pairs of tie-down points, each 6 tons, on the sides in the low-bed 5 pairs of tie-down points, each 5 tons, between the longitudinal beams Tow hitch, trailer turntable Bljdsi Ri N Ajpfx Aarsi Tow fork with tested 40 mm drawbar eye, mechanically adjustable in length by 6 x 100 mm and lockable (Tow fork length 1,700 - 2,300 mm) Axles + Suspension BPW drum brake axles, each 10 tons axle load, spring plates. Axle endurance brake test for 105 km/h, rear axle can be manually removed. Air suspension with raising & lowering valve Wheels and Tires 235 / 75 R 17.5, from leading manufacturers, steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system, spring-loaded parking brake, 2 tamper-proof coupling heads at the front, with connecting lines to the towing vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides, 2 white position lights at the front, 2 white/red marker lights at the rear, rotating beacon with holder, switched via parking lights (light can be removed), 2 pairs of warning signs, double LED illuminated and extendable to 3,300 mm, removable with plug, 2 x 7-pole tamper-proof plugs at the front, with connecting cable, 1 x 7-pole agricultural plug, voltage converter 12/24 Volt (only for electrical system, not for ABS/EBS) Floor Steel/diamond plate floor on the outrigger, perforated sheet covering between the longitudinal and transverse beams. Axle cover is not designed to be driven over, widening to 3,000 or 3,300 mm is possible. Operating instructions Note! A special permit is required for a 10,000 kg axle load. The permit must be applied for separately in each federal state; the legislator does not have to give a guarantee for 20 tons GVW. Customer risk. A special permit is required if the overall length of the train exceeds 18,750 mm. Observe country-specific registration regulations. The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and saddle loads. Observe the BO circle!!! Registration / Signs Country of registration: Germany, with Dekra inspection and certificate (according to §13 EG - FGV), prepared for single-row license plate holder, warning sign according to ECE - 70, contour marking with reflective strips according to ECE R 048 Painting Frame at the front hot-dip galvanized incl. passivation, frame at the rear RAL 9006 silver, tow fork KTL black Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 9,900 kg, maximum load weight: 14,100 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, tire size: 235 / 75 r 17,5, Custom-tailored transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further information Chassis Steel welded construction Turntable with robust ball bearing, storage box recessed Turntable extension Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Mud flaps at the rear across the entire width Extendable wideners to 3,000 mm (not in rear slope) (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down eyes, low-loader type 3 pairs of tie-down points, each rated at 10 tons, integrated in the front of the floor 6 pairs of tie-down anchor plates, top and side in the outer frame, each rated at 10 tons 1 x in the neck area the rest distributed in between with a maximum distance of 1200 mm 1 x rear slope 5 pairs of pocket slots recessed in the outer frame, inside 70 x 40 mm, (can be converted to 5-ton ring tie-down eyes, not included in the scope of supply) Towing device, turntable trailer Tow bar with tested 40 mm towing eye Note! With a 40 mm towing eye, the permissible total weight of the truck must not exceed 18000 kg; otherwise, a 50 mm towing eye is required. Axles + Suspension SAF drum brake axles Axle / chassis laser-aligned, reducing tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization in the front and rear (rocker equalization) Wheels & Tires 235 / 75 R 17.5, according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be pulled by towing vehicles which guarantee the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking light (beacon can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front area: steel floor followed by 70 mm softwood floor, steel / diamond plate in the wheel arch area Rear slope with 70 mm softwood floor Access Ramps Steel ramps, 2800 mm long, 750 mm wide, laterally movable covered with wood with gas spring support Operating Instructions With an axle load of 10,000 kg, an exemption permit is required, only indivisible loads are possible!!! The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle / support and saddle loads. Country of Registration / Signs Country of Registration: Germany 1 with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for license plate holder, two-line Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame: RAL 3002 Carmine Red 10-year warranty against rust-through Tow bar: galv Bodpfxoi Ri I Ee Aarjli

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,000 kg, maximum load weight: 22,000 kg, overall weight: 29,000 kg, axle configuration: 2 axles, loading space length: 7,500 mm, loading space width: 2,170 mm, total length: 11,700 mm, total width: 2,550 mm, total height: 2,650 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Blsdpfx Aei Ri Hvearsi Further Information Chassis Fine-grain steel welded construction, drawbar plate with interchangeable 2 kingpin, with 2 kingpin positions Outer frame slightly angled with load-lock profile for lashing straps 2 pairs of lashing eyes embedded in the outer frame on the gooseneck, 5 tons each 8 pairs of lashing eyes embedded in the outer frame in the well, 5 tons each 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without stroke compensation 2 outrigger wedges with holder Aluminum side underrun protection Steel rear underrun protection Quarter-shell fenders in front of and behind the axle assembly 2 storage boxes made of stainless steel, w=600/h=400/d=500 mm, with polished, lockable door 2 pairs of pole pockets embedded in the outer frame on the gooseneck, internal dimension 70 x 40 mm 6 pairs of pole pockets embedded in the outer frame in the well, 70 x 40 mm Internal dimensions!! Internal width between the poles 2420 mm!! 3 lashing/pole strips in the well, transverse embedded in the floor over the entire width up to the outer frame, approx. 100 mm high. With 20 mm round steel strips, top and bottom, distance from top to bottom approx. 60 mm (of the round steel). At the bottom with an angle plate as a cover, half open downwards. For lashing and inserting poles 80 x 80 mm. Pieces of insertable poles W=80/ D=50/ L=1200 mm, hot-dip galvanized Pieces of insertable poles W=80/ D=80/ L=1200 mm, hot-dip galvanized Rear extension, mechanical, with hand crank, extendable by approx. 1500 mm, lockable every 500 mm, with support beam, at the center of gravity at approx. 500 mm, loadable with 2000 kg over the entire width, at 1000 mm with 1000 kg over the entire width and at 1500 mm with 500 kg over the entire width, including underrun protection with lighting, extendable. 2 pairs of insertable poles W=80/ D=80/ L=1200 mm, hot-dip galvanized Storage compartment for insertable poles, open, on the front panel or below the loading area (for 10 insertable poles 80 x 50 x 1200 mm and 4 insertable poles 80 x 80 x 1200 mm) Axles & Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Last axle with steering knuckle, with automatic reversing lock via reversing light and additional locking function on the vehicle via a button. Air suspension with raise/lower valve Wheels & Tires 235 / 75 R 17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking System 2-line compressed air braking system Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Axle load recognition via EBS-Canbus signal, for display on the display in the driver's cab, truck must be appropriately prepared, no factory installation. Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole sockets at the front, without connecting cable 2 additional LED work lights at the rear, switched via the reversing light 1 LED rotating beacon with holder, swit

Condition: new, machine/vehicle number: Produktpalette, axle configuration: 1 axle, tire size: 11,5/80-15,3 alliance, Additional information: 40 mm drawbar eye Support leg with roller Tires: 11.5/80-15.3 Alliance Without suspension Drawbar eye to center of saddle plate: 3200 mm Bledoi Ri D Tjpfx Aarji Tire load capacity: 5800 kg at 30 km/h + 5150 kg at 40 km/h Not approved for road use, for internal use only!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,700 kg, maximum load weight: 28,300 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, loading space volume: 92 m³, total length: 13,800 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 r22.5, tire condition: 100 %, Additional information Chassis Fine-grained steel welded construction in lightweight design, extending to the support legs; kingpin plate with 2 replaceable kingpins Lateral floor preparation for lashing eyes 24-ton, two-speed support legs, single-sided operation, with straight lower part, without shock absorption Extendable ladder at the rear Door latch on the side 2 wheel chocks with holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps; foldable mudguard for lighting unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with holder 1 plastic toolbox, with drawer and insert, b=650 / h=520 / d=670 mm, lockable with a padlock (padlock not included) 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting aid, actuated by 3x braking (starting aid functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking system 2-line compressed air braking system; color-coded lines for easy maintenance Spring brake parking brake 2 fail-safe coupling heads at the front, without connection line EBS, Electronic Braking System with EBS socket at the front, without connection cable With raise and lower valve Vehicle - Driving stability system Wheels and tires 385/55 R22.5, according to manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable Sliding floor hydraulics Bsdpfji Riywex Aarjli Hydraulic cylinder with sliding mechanism installed in the floor; 2-circuit hydraulic system Switching between forward/backward movement electrically via remote control with cable - Sliding floor power supply via parking lights Actuation hydraulically via truck PTO Hydraulic connection with hose at the front wall and HDK screw connector NW = 48 mm Note: A 2-circuit hydraulic system is required! Recommended pump output: Flow rate: 110 l/min Pressure: 250 bar Minimum oil tank filling: 100 l Sliding floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design Tipping body Aluminum tipping body made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, welded together at the top all around with a wide special reinforcement profile made of aluminum, welded to a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom with rail cleaner Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 pieces of externally mounted swivel bolts, locked at the top and bottom. Rear wall with mechanical safety locking, operation at the rear on the driver's side. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platform with access ladder on both sides in driving direction left/right and railing, for opening

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,500 kg, maximum load weight: 8,300 kg, overall weight: 1,188 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, total length: 6,900 mm, total width: 2,550 mm, suspension: parabolic leaf (spring), tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing Gearbox support leg at the front 2 support wedges with holder Underrun protection, steel Lockable storage compartment for ramps under the loading area Coupling device for center axle trailer Drawbar with tested 40 mm tow hitch Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles + Suspension Euro axles of our choice, with tapered roller bearings and S-cam brakes Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (lever equalization) Wheels and Tires 235 / 75 R 17.5 According to the manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system, color-coded lines for easy servicing Hand-operated parking brake Integral air reservoir Without ABS, but with mechanical ALB, then max. 60 km/h approval 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle Electrical System 12 Volt, multi-chamber lights, without yellow LED lighting on the sides, reflectors on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 x 7-pole 12 Volt plug at the front, with connecting cable, extended by approx. 60 cm Hydraulics Three-way tipper, hydraulic multi-piston press with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck. Hydraulic connection with SVK plug NW 10/3, incl. connecting hose Operation hydraulically via truck PTO Tipping Bridge Sturdy tipping bridge with 4 mm steel sheet floor, side wall construction steel, side walls continuous, foldable and suspended with central locking at the bottom. Rear uprights can be inserted. Rear wall foldable and suspended, with central locking at the bottom. Bed length approx. 4,500 mm, side walls with 5 hinges at the bottom. Bed width 2420 mm 5 pairs of lashing eyes in the floor, each 5 tons Operating Instructions The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle / support and saddle loads. (Poor driving and handling characteristics possible due to incorrect load distribution) Bedji Rizbepfx Aarjli Approval Country / Signage Approval country: Germany With Dekra approval and certificate, for max. 60 km/h approval, towing vehicle LoF (approval country Switzerland max. 40 km/h possible) Prepared for single-row license plate holder Without contour marking / reflective stripes according to ECE R 048 Painting Frame hot-dip galvanized incl. passivation, 15-year warranty against rust Side walls / bridge RAL 3002 carmine red Note! If the bridge is galvanized, it will not be painted! Note! Bridge is only primed inside! Wide tires also possible at an extra cost. 355 / 60 R 18, then loading height approx. 980 mm Attention: Archive images!

Condition: new, machine/vehicle number: 8fbda13da8c595f64678f0f82, empty load weight: 2,100 kg, maximum load weight: 11,300 kg, overall weight: 13,400 kg, axle configuration: 2 axles, total width: 2,550 mm, tire size: 275/70 r 22,5, Additional information Chassis: Central axle semi-trailer Fine-grain steel welded construction Fifth wheel coupling, manufacturer at our discretion, for 2 kingpins, with ball bearing swivel ring, locking angle max. 20° Support at the drawbar and at the front dolly Underrun protection, steel Half-shell fenders Coupling system for central axle semi-trailer CLG under-coupling drawbar with tested 50 mm towing eyes for the dolly and the tractor unit, including drawbar locking mechanism on the truck! Axles + Suspension BPW disc brake axles Air suspension For swap train design, standard fifth wheel height lowered to approx. 1100 mm, fifth wheel height raised to approx. 1280 mm, fifth wheel mounting height approx. 1140 mm. Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit 2 fail-safe coupling heads with coil-flex connecting lines to the semi-trailer EBS, electronic braking system with EBS plug at the front, with connecting cable EBS coil-flex connecting lines to the semi-trailer With raising and lowering function, ECAS, via truck control, ECAS CAN 2 bus required in the truck. Without ECAS CAN 2 bus in the truck, additional operating control required in the truck (not included in the scope of delivery): Electrical system with a pre-wired cable and a distribution box. Operation via 15-pin socket, pin 11 and 15, or 2 x 7-pin socket, pin 7 and 5. Note! This design must be technically checked in conjunction with the semi-trailer. If it is not technically possible to raise and lower the dolly and semi-trailer together, the operation is carried out via WABCO eTASC with a hold function in the lowered position + auto-reset function (no power required from the truck). Additional operation on the vehicle via WABCO eTASC + hold function in the lowered position + auto-reset function (no power required from the truck) Vehicle driving stability system ECAS only possible in conjunction with WABCO EBS. Axle load detection via EBS-CAN bus signal, for display on the instrument panel in the cab, the truck must be appropriately prepared, no truck installation. Bedei Rizxspfx Aarjli Brake release function from the truck to PIN 14 and additionally via a button on the vehicle next to the H & S valve, for releasing the brake in the coupled state, EBS power supply must be ensured! With CAN router Wheels and tires 275/70 R 22.5, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal, flashing side marker lights 2 white position lights at the front, LED 2 white/red side marker lights at the rear 2 x 7-pin fail-safe plugs at the front, with connecting cable 2 x 7-pin fail-safe plugs with coil-flex connecting lines to the semi-trailer Cable + plug/or socket for reversing camera system, depending on the vehicle type Operating instructions Note! Observe the long truck regulations! Please note the currently permitted route network! The tractor unit must be brought to the Triptis plant for approximately 1 week for adjustment of the drawbar!

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 7,550 kg, maximum load weight: 27,450 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/55 r22.5, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis Fine-grained steel welded construction in lightweight design, up to the support legs, drawbar with interchangeable 2 kingpin Laterally in the floor with lashing eye preparation (max. 13 pairs) 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Extendable ladder at the rear Door lock on the side 2 wheel chocks + holder Aluminum side impact protection Steel underrun protection with wide Fliegl mud flaps, foldable fender for light unit Quarter panel fenders Rear impact protection Aluminum ladder approx. 3,550 mm, with holder on the side Tarpaulin rod with bracket 1 plastic toolbox, with drawer and insert, w=650/h=520/d=670 mm, can be locked with a padlock 1 spare wheel holder for 1 spare wheel, with wheel fastening kit Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering & starting assist, actuated 3x by the brakes (starting assist is functional up to an axle load exceeding 30% and a speed of max. 25 km/h) Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring brake parking brake 2 non-interchangeable coupling heads at the front EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Bodpfx Aei Riwxearjli with lifting and lowering valve Vehicle Stability System Wheels & Tires 385/55R22.5 according to manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole and 1 x 15-pole non-interchangeable sockets at the front Self-Loading System (SBS) Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulic system. Switching between forward/reverse operation is done electrically via remote control with cable. -Shovel floor power supply via side marker light Actuation hydraulically via truck auxiliary drive Hydraulic connection with hose on the front wall and HDK screw connector NW = 48 mm, Note: A 2-circuit hydraulic system is required! Recommended pump performance: Flow rate: 110 l/min Pressure: 250 bar Oil tank filling min: 100 l Self-Loading System (SBS) Floor Sliding floor with wear plate at the rear Floor boards made of aluminum, 8 mm floor profile, ribbed design SBS Tipper Body Aluminum box tipper body, front and side walls made of aluminum hollow profiles, welded around the top with a wide special reinforcement profile made of aluminum, and welded with a special frame at the bottom. Sliding wall for better unloading of the load, with reinforced tarpaulin flaps at the bottom. Rear wall made of aluminum hollow profiles, as a 2-wing door, with a division of 1/2 to 1/2, framed all around with a special U-profile with stop and rubber seal, with 2 externally mounted swivel locking rods, locked at the top & bottom. Rear wall with mechanical safety locking, operation at the rear on the left in the direction of travel. With pivoting crossbar at the top. The door locks can be locked with a padlock. Standing platfor

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,770 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Roll-Off Container Trailer * High-tensile steel welded chassis construction * Two longitudinal beams with cross members * Top surface of the longitudinal beams designed as wear-resistant container roller tracks * Rear loading with integrated loading ramp * Suitable for roll-off containers with lengths of 6.5 m and 7.0 m * Container locking system: * 2 pairs of recessed locking hooks integrated into the chassis * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for transporting roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles with 430 mm brake disc diameter * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension * Raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish Bjdpfx Aji Ri Nmeareli ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: * Opening the container locking system automatically activates the spring-loaded parking brake * Electronic Stability Program (Vehicle Stability Control System) * Duomatic air coupling * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white LED front position lights * 2 white/red rear outline marker lights * 1 x 15-pin front connector * 2 additional LED work lights at the rear, activated automatically when reverse gear is engaged ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Surface Protection & Paint Finish * Chassis: hot-dip galvanised including passivation treatment * 15-year warranty against perforation corrosion * Drawbar: black KTL coating (cathodic dip coating) --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,000 kg, maximum load weight: 29,000 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,800 mm, total width: 2,550 mm, tire size: 385/65 r22.5, tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Fine-grain steel welded construction, drawbar with interchangeable 2 kingpin Vario stake system 4 pairs recessed in the loading area, can be pushed together to 2,100 mm and extended to approx. 3,500 mm for loading. Stakes can be locked every 100 mm on an inner width of 2,100 mm to 3,000 mm, 4 pairs of divisible stakes 600 mm + 1,200 mm, total height 1,800 mm removable. With a stake inner width of approx. 2,350 mm or more, there is an overwidth. Vario end walls Bsdpfji Ri R Djx Aarjli Floor prepared for attaching 3 end walls. 4 x 5 pairs of Vario stake pockets for attachable end walls and 1 x 3 pairs in the middle for transporting construction steel mats of 2 x 5,000 mm or 2 x 6,000 mm. 2 Vario end walls, each consisting of 1 pair of plug-in stakes and 1 crossbar at the top, approx. 2,200 mm wide. Crossbar can be extended by 220 mm on both sides, with lashing eye for securing. Height of Vario end wall approx. 1,900 mm, can be converted to a height of 1,300 mm or 700 mm. 4 stake pockets recessed in the middle of the floor for 80 x 80 mm plug-in stakes 1 pair of supports at the bottom for Vario end wall at the front 1 pair of supports at the bottom for Vario end wall at the rear Outer frame slightly angled with Load-Lock profile for attaching lashing straps 14 pairs of lashing eyes additionally recessed in the outer frame, each 5 tons 24 tons, 2-speed winch, single-side operation, with straight lower part, without stroke compensation Extension ladder at the rear Aluminum side impact protection Steel underrun protection, galvanized Quarter fender in front of and behind the axle assembly with anti-splash flaps only on the last axle Rear impact protection 8 steel winches with wire rope and swivel hook, 4 on the left and 4 on the right with rope guide through the outer frame, 1 removable attachment gearbox for steel winch - supplied loose Spare wheel holder for 1 wheel, with wheel fastening kit 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock. 1 closed stake storage box, open at the top, under the loading area, doors on both sides, w=450 mm/H=400/420 mm/d=2460 mm 4 lashing/stake rails crosswise recessed in the floor across the entire width up to the outer frame (max. usable inner width between the outer plug-in stakes approx. 2170 mm), approx. 100 mm high. With 20 mm round steel strips, at the top and bottom, distance from top to bottom approx. 60 mm. At the bottom with an angle plate as a closure, half open downwards. For lashing and inserting 80 x 80 mm stakes. Wrap-around Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured, reduces tire wear and fuel consumption Air suspension 1st axle automatic lift axle, including forced lowering and start assist, operated 3x brakes (start assist is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended driving height, therefore no guarantee for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 760 kg, maximum load weight: 1,740 kg, overall weight: 2,500 kg, axle configuration: 1 axle, tire size: 235 / 75 r 17,5, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information: Chassis: Central axle trailer Fine-grained steel welded construction, including 4 mounting points for IBC containers, as technically feasible. In case of an order, customer approval of the drawings is required! 2 longitudinal beams as double-T beams for subsequent self-supporting structure with front crossbeam 2 pairs of lashing eyes for securing the IBC container Telescopic support leg at the front Chocks with holder Fenders without side impact protection Steel underrun protection Blsdpfxji Ri Ans Aarsi Coupling device for central axle trailer Drawbar with tested 40 mm tow hitch, suitable for freight transport Drawbar height-adjustable via spindle, max. adjustment range 250 mm Axles + Suspension GFA or BPW axle, as selected by the manufacturer, with tapered roller bearing and S-cam brake Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing Wheels and Tires 235 / 75 R 17.5 as selected by the manufacturer Steel rims, factory silver Braking System 2-line compressed air braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle without ABS, but with mechanical ALB, then max. 60 km/h approval Electrical System 24 Volt, multi-chamber lights, without yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole non-interchangeable connectors at the front, with connecting cable Registration country/signs Registration country: Germany with DEKRA inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holder Painting Frame DB 7350 Novagrau 10-year warranty against rusting Attention! These are archive images. Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs.

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 3 kg, maximum load weight: 14 kg, overall weight: 18 kg, axle configuration: 2 axles, loading space length: 7,800 mm, loading space width: 2,530 mm, total length: 9,500 mm, total width: 2,550 mm, total height: 1,150 mm, suspension: air, tire size: 385 / 55 r 22,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Further information Turntable semi-trailer for waste disposal Fine-grained steel welded construction Sled: Container is placed on the sled from the rear and pushed forward, container stop at the front adjustable for 6.0 / 6.5 and 7.0 m skip loaders with external rollers Container locking: - 2 pairs of locking hooks recessed in the floor - pneumatic operation. The container locking system is a 2-point system that operates from the inside, and locking of skip loaders with an internal frame is not possible. Turntable with robust ball bearing race Chocks with holder Aluminum side impact protection Steel underrun protection Half-shell fenders Rear impact protection, vertical, left and right, with delta-shaped rubber on the underrun protection holder Coupling device, turntable semi-trailer Tow hitch with tested 40 mm tow eye Axles + Suspension SAF disc brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension with lift and lower valve Wheels and tires 385 / 55 R 22.5 According to the manufacturer's choice Steel rims, factory silver Bsdpfx Aaoi Ri Nqerjli Braking system 2-line compressed air braking system Spring-loaded parking brake Anti-theft device: The spring-loaded parking brake is activated when the container locking system is open. Vehicle - driving stability system 2 non-interchangeable coupling heads at the front, with connection lines to the tractor unit EBS, electronic braking system with EBS connector at the front, with connection cable Note: The semi-trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 additional LED work light at the rear, switched via reversing light 2 x 7-pole non-interchangeable connectors at the front, with connection cable Approval / Signage Country of approval: Germany With Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paintwork Frame DB 7350 Novagrau (anthracite gray) Tow hitch, KTL black Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,600 kg, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,750 mm, loading space width: 2,480 mm, total length: 9,925 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: -, tire condition: 100 %, Additional Information Tandem Platform Trailer Type TPS 180, Standard construction with forklift mount Chassis: Central axle trailer Blsdsndwdhjpfx Aarei Fine-grain steel welded construction Outer frame slightly angled, new design with Load-Lock profile for securing tie-down straps 1 pair of geared support legs at the front, with straight lower part and single-sided operation on the right-hand side Partial wheel arches 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock Mount for a carried forklift at the rear, including 2 fork pockets, 2 extendable support tubes, and a mount for chain securing with a locking pin. Underrun protection with light unit that can be folded away. The forklift mount shifts the axles to the rear; please consider load distribution when driving without a forklift. Customer risk! Note! Forklift mount! Carrying a forklift can significantly reduce the vertical load. Counterweight at the front is required! On wet and slippery roads, additional ballast weight or a load at the front of the trailer, weighing at least 2 tons, is necessary; the speed should then be reduced, and the driving style adapted to the road and driving conditions. The forklift must always be secured with chains during transport. The distance between the lift mast and the trailer body should be a maximum of 45 mm, or the vertical forklift tines must rest against the forklift pockets at the end. We assume that the towing vehicle does not have a steering or lift axle, or that the steering axle is always locked or the lift axle is always on the ground. Coupling System: Central axle trailer Drawbar with tested 50 mm drawbar eye, freight forwarding design Lower coupling on the drawbar Folding mount with spring support on the drawbar, for guiding the connecting cables to the truck Axles + Suspension SAF disc brake axles with 430 mm disc diameter Laser-measured axle/suspension to reduce tire wear and fuel consumption Air suspension with raise and lower valve 1st axle: automatic lift axle with proximity switch, for lift axle Wheels and Tires 385/65R22.5, according to manufacturer's choice Steel rims, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake Vehicle - Driving Stability System Duomatic connection at the front, with connecting cable to the towing vehicle, connection on the right-hand side EBS, Electronic Braking System with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical System 24 Volt, multi-chamber lights in LED, side yellow LED lighting, license plate lighting in LED

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7 kg, maximum load weight: 17 kg, overall weight: 24 kg, axle configuration: 3 axles, loading space length: 5,900 mm, loading space width: 2,520 mm, loading space height: 860 mm, total length: 11,070 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Chassis Steel welded construction Turntable with robust ball bearing race Foldable rear support 2 support wedges with holder Aluminum side impact protection Splash guards at the rear across the entire width Bjdpsi Riwfsfx Aarsli Partial wheel arches on the 1st axle with anti-spray flaps, anti-spray flaps behind the 2nd and 3rd axles 1 plastic toolbox, with insert tray, w=620/h=360/d=440 mm, lockable with a padlock. Extendable widening elements to 3,000 mm (not in rear slope) Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down points for low-bed trailers 1 pair of recessed ring tie-down points at the front on the drawbar, each 5 tons 7 pairs of recessed tie-down loops on the top and sides of the outer frame, each 10 tons 1 x at the front on the drawbar 6 x in the low-bed area First tie-down point 250 mm from the front and last tie-down point max. 250 mm from the rear, distance between tie-down points not greater than 1100 mm 5 pairs of recessed beam pockets in the outer frame, interior 70 x 40 mm (can be converted to 5-ton ring tie-down points, not included in the scope of delivery) 2 pairs of folding tie-down points in addition, each 10 tons 1 x on the drawbar (projects) 1 x behind the last axle, recessed in the floor Coupling device, trailer turntable Drawbar with tested 40 mm drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load compensation (rocker arm compensation) Wheels & Tires 235/75R17.5 according to manufacturer's choice with M&S marking Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring brake parking brake 2 non-interchangeable coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Manufacturer: Wabco or Knorr Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin non-interchangeable plugs at the front, with connecting cable 1 LED rotating beacon with holder, switched via parking lights (light can be removed) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Floor Drawbar at the front with steel/diamond plate surface Storage box in the ramp slope recessed into the drawbar followed by 70 mm softwood floor, steel/diamond plate surface in the wheel arch area Rear slope with 70 mm softwood floor Low-bed area including rear slope 6,500 mm Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally adjustable additional ramp securing device, foldable at the bottom (to prevent lateral slippage of the ramps, not in conjunction with lateral hydraulic ramp adjustment) covered with wood with spring-loaded support Operating instructions With an axle load of 10,000 kg, a special permit is required; only indivisible loads are permitted!!! The specified total weight is technically possible; depending on the cargo, the total weight may not be reached while complying with the permissible axle/support and fifth-wheel loads. Country of registration/plates Country of registration: Germany Type approval according to EC 2007/46 24/7 service hotline

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,000 kg, maximum load weight: 14,000 kg, overall weight: 18 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, total length: 9,975 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Chassis, turntable, waste disposal Fine-grained steel welded construction Container locking system: - 2 pairs of locking hooks recessed in the floor - pneumatic operation The container locking system is designed as a 2-point system, operating from the inside, and it is not possible to lock roll-off containers with an internal frame (for transporting roll-off containers with a subframe according to DIN 30722). Note: At the beginning of the roller recess at the front, the container must be pushed in completely flat! Longitudinal guide rails can be adjusted laterally and removed, rails approx. 115 mm high Turntable with robust ball bearing 8 pairs of lashing eyes recessed at the top and on the side in the outer frame, each with a capacity of 5 tons 7 pairs of clevis pockets recessed in the outer frame, inside 70 x 40 mm (can be converted to 5-ton ring lashing eyes, not included in the scope of delivery) 2 chock blocks with holder Aluminum side impact protection Steel underrun protection Quarter panel fenders according to EC with anti-splash flaps according to EC Coupling device, trailer, turntable Drawbar with tested 40 mm drawbar eye Blodji Ri Nuopfx Aaroi Axles + suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing Wheels and tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle ABS and ALB, with ABS plug at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole fail-safe plugs at the front, with connecting cable Floor Steel floor Roller recess for container recessed in the floor at the front for roll-off containers from 5,000 - 7,000 mm in length Note: Slight floor waviness due to welding distortion is possible! Ramps Lockable storage space for ramps below the loading area Operating instructions A special permit is required for an axle load of 10,000 kg. The permit must be applied for individually in each federal state, and the legislator does not have to guarantee approval for 20 tons GVWR. Customer risk. The specified total weight is technically possible, but depending on the load, the total weight may not be reached while complying with the permissible axle/support and saddle loads. (Poor driving and tracking behavior is possible due to incorrect load distribution) Country of registration / signs Country of registration: Germany with Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-line license plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Warning sign according to ECE - 70 Paintwork Frame DB 7350 Novagrau 15 years warranty against rust Note: Floor waviness due to hot-dip galvanizing is possible! Drawbar, KTL black Note: Archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,500 kg, maximum load weight: 15,500 kg, overall weight: 24,000 kg, axle configuration: > 3 axles, loading space width: 2,520 mm, loading space height: 890 mm, total length: 11,940 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Further Information Low-loader trailer chassis Steel welded construction Turntable with heavy-duty ball bearing Foldable rear support 2 support wedges with holder Aluminum side impact protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Extendable widening elements to 3,000 mm (not in rear slope) (However, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks 70 mm for widening to 3000 mm Tie-down points for low-loader 1 pair of tie-down points on the gooseneck, each 5 tons 9 pairs of tie-down eyes embedded at the top and sides in the outer frame, each 10 tons 2 x at the front on the gooseneck 7 x in the low bed 6 pairs of tie-down holes in the outer frame of the low bed, each with 5 tons. (for securing lashing straps) Coupling device for trailer turntable Drawbar with tested 50 mm drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Bodsi Ri Izjpfx Aarsli Parabolic suspension with maintenance-free steel-rubber bearing and mechanical incl. Axle load equalization at the front and rear (lever equalization) Wheels and tires 235 / 75 R 17.5 according to the manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air braking system Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 1 LED warning light with holder, switched via side lights (light can be removed) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm 2 x 7-pin fail-safe plugs at the front, with connecting cable Floor Gooseneck at the front with steel/diamond plate thereafter with 70 mm softwood floor, in the wheel arch area steel/diamond plate Rear slope with 70 mm softwood floor Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable covered with wood Hydraulically operated via tractor's auxiliary drive with throttle, operation on the left side Hydraulic connection with quick-release coupling NW 10/3, incl. connecting hose Operating instructions At 10,000 kg axle load, an exemption permit is required, only indivisible loads are possible!!! The stated total weight is technically possible; depending on the cargo, the total weight may not be reached while observing the permissible axle/support and saddle loads. (Poor driving and handling behavior possible due to incorrect load distribution) Country of registration / Signs Country of registration: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline included prepared for license plate holder, two-line Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Painting Frame DB 7350 Novagrau 10-year warranty against rusting Drawbar galva