Used Other Semitrailers With Work Platform for sale (102)

Condition: used, maximum load weight: 36,300 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 05/2027, 24 month guarantee from first registration, hydraulically steered hydraulically steered Nato Stweckdose central lubrication system fifth wheel dimension 1120 - 1300 mm loading height 1340 - 1520 mm depending on fifth wheel dimension 10t lashing eyes in the edge frame spacing 1200mm excess length board remote control rotating beacon pluggable LED 220V socket extension lights 3 axle telescopic semitrailer 1x extendable up to 7500 mm (500 mm steps) loading floor 28mm hardwood 10 ton lashing eyes in the edge frame (spacing 1200 mm) stake pockets in the edge frame for stakes 81 x 5 1mm removable front wall made of steel 1800mm high Todomhd Ryopfx Abvjb

Condition: used, maximum load weight: 30,250 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2014, next inspection (TÜV): 06/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2014, Equipment: ABS, Schwarzmüller Platform Flatbed Trailer Lift Axle Permissible total weight: 36,000 kg, Unladen weight: 5,750 kg, Payload: 30,250 kg, SAF axles, Tsdpfswqyrhex Abvjb Lift axle 1st axle, Air suspension, Disc brakes, Underride protection right, left, and rear, 2x storage compartment right, 1x storage compartment left, Rubber rear impact buffer, 2x extensible wide load signs at the front, 2x extensible wide load signs at the rear, 2x crank supports operable from right side, EBS, ABS, Perforated external frame with hole spacing approx. 100 mm, Wheelbase: approx. 6,350 + 1,310 + 1,310 mm, External dimensions LxW: approx. 13,840 x 2,550 mm, Loading area LxW: approx. 13,620 x 2,480 mm, Front wall height: approx. 2,400 mm, Loading height: approx. 1,250 mm, Tires: 385/65R22.5, Tread depth tires left front: 4 mm, Tread depth tires left middle: 16 mm, Tread depth tires left rear: 8 mm, Tread depth tires right front: 5 mm, Tread depth tires right middle: 15 mm, Tread depth tires right rear: 10 mm, Further equipment: Reinforced steel frame welded construction for point load 20 t over 4 m at frame center of gravity for ASH unladen 1,090 - 1,190 mm with air-suspended tractor, replaceable 2" kingpin (EU installation size, corner dimension 2,040 mm), Perforated external frame with hole spacing approx. 100 mm, oval hole 40/25 mm according to DIN EN 12640 Air suspension with lift and lower function (approx. +120/-80 mm), Automatic setting of driving level from 15 km/h, SAF "Intradisc-plus-Integral" air suspension unit with low-maintenance disc brakes, ø 430 mm, 3 x 9 t rigid, wheelbase 2 x 1,310 mm, Front axle automatically liftable = 2-sided lift (1 x 96307) lifts and lowers automatically depending on weight (when lift axle is raised, the loading or total height increases by approx. 50 mm) and additionally with forced lowering incl. integrated start-up aid limited by speed for button operation in the cab (without button installation), 1 odometer = hubodometer (ECO-Meter) (KIT No. 10801, with hubcap KIT No. 52917) (on 2nd axle front right), Mech. 2 x 12 t support winches, single-sided operation and push compensation, Two-line brake, EBS-E - electronic brake system (Wabco 2S2M = one axle = 2nd axle monitored), RSS - stability program, Spring-loaded parking brake on 2 axles, Aluminum air tank, unpainted, Plywood floor 27 mm, flush with outer frame, 2 steel hat profile rails above the longitudinal beams plus additional 12 mm plywood floor, beveled to the outer frame, Fixed aluminum hollow profile front wall 2,400 mm with 2 center supports,

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 750 mm, Year of construction: 2024, Equipment: ABS, ( sample pictures ) SADDLE CONSTRUCTION KRONE TRIDEC 3-axle SDP 27/eLNZ4-BS / 750 mm BW /TRIDEC Todpfx Asu S Tzbjbveb make/manufacturer : KRONE EZL : NEW VEHICLE dimensions : 13620 x 2480 x 750 gross vehicle weight : 36000 kg empty weight : 7019 kg air suspension lift/lower, disc brakes, spare wheel holder, ABS, EBS, axle make : BPW ECO PLUS ver. 3 lift axle, screen-printed floor, tie-down rings, toolbox, exterior paint finish : black KTL, body paint finish : white chassis paint : black KTL, tires: 6-ply, tire condition : 100 %, tires HA 385 /55 R 22.5 4 pairs of 750 mm high drop sides CONSTRUCTION PANELS with 29 x stake pockets 81 x 81 in the center and in the outer frame + 12 steel stanchions on the left of the frame 12 pairs of reinforced lashing holes a 4 to 12 pairs of multi lash lashing rings multillock outer frame ( usable with closed bw ) steel bulkhead 1600 mm high reinforced version LIFTACHSE fully automatic 15 + 2 x 7 pole front socket toolbox / e wheel holder BPW ECO PLUS VERSION 3 !!!!! TRIDEC FORCED STEERING ( rod and 2 x turntable ) comes to every construction site wheelbase 1310 /2050 mm all information without warranty , subject to prior sale !!! if you have any questions for this or other vehicles please call us . if you have any questions for this or an other trailer / car please call us .

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 800 mm, Year of construction: 2026, Equipment: ABS, available for immediate delivery SADDLE PLATFORM CONSTRUCTION MATERIAL KÖGEL 3-axle SN24/ BW 800 mm/144 x rung pockets STEERABLE manufacturer: KÖGEL registration date: NEW VEHICLE 2025 dimensions: 13620 x 2480 x 800 permissible total weight: 35000 kg unladen weight: 6490 kg Tjdpfeulqr Esx Abveb axle load 15000 kg air suspension, raise/lower function disc brakes ABS EBS mileage: 0 axle manufacturer: BPW ECO PLUS 3 / NEW lift axle steerable axle trailing arm steering screen-printed floor side boards: 5 pairs 800 mm folding stanchions: 3 pairs lashing eyes tool box paint finish, body: silver paint finish, chassis: black tire configuration: 6 tire condition: 100% rear tires: 385 / 65 R 22,5 IDEAL CONSTRUCTION MATERIAL SADDLE with 800 mm side boards, 5 pairs with 21 pairs of lashing eyes, each with 2500 kg lashing force with 8 x 18 RUNG POCKETS 80 x 80 can also be used as lashing eyes? 7200 kg stable floor? lift axle / STEERABLE AXLE BPW ECO DISC 430 mm vehicle can also be operated as a platform. MULTILOCK OUTER FRAME, 2 tons lashing force each LASI 12642 XL with TRAILING ARM STEERING AXLE (friction-steered) NEW!!!! front bulkhead now made of aluminum, 2000 mm high TPMS tire pressure sensors now in the rims?… example images all information without guarantee, subject to prior sale! if you have any questions about this or other vehicles, please call us. if you have any questions for this or another trailer/car please call us.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2021, loading space length: 13,620 mm, loading space width: 2,550 mm, loading space height: 890 mm, Year of construction: 2021, Equipment: ABS, lfd 12183 JUMBO FLATBED MEGA TRAILER FELLECHNER 3-axle SP32 -G39 JUMBO / SAF / LIFT / CONTAINER Make/Manufacturer: KÄSSBOHRER First registration: 07.2021 Dimensions: 13,620 x 2,480 x 890 mm Gross weight: 36,000 kg Unladen weight: 6,725 kg Fifth wheel load: 12,000 kg Air suspension – lifting/lowering Drum brakes Spare wheel holder ABS EBS AGS Axle manufacturer: SAF drum Lifting axle Anti-slip phenolic floor Lashing rings Toolbox Body color: green Chassis color: green Tyres: 12 units Tread depth: 5–10 mm Rear axle tyres: 245/70 R17.5 Loading platform dimensions: rear 9,300 mm / front 4,400 mm Multilock external frame 15 + 2 x 7-pin sockets (lights) Including container locks for BDF or 20 ft container: 1 x 20 ft / 2 x 20 ft / 1 x 40 ft Tsdpfx Aowyg Nrsbvjb 40 ft container (empty) including adapter (height) Normal height: 940 mm ASH = 990 mm LIFT AXLE Only 123,000 km All information is non-binding; subject to prior sale! If you have questions regarding this or other vehicles, please contact us.

Condition: used, axle configuration: 3 axles, first registration: 12/2003, tire size: 385/65R22,5, Kögel 3-axle semi-trailer, open platform/flatbed, perforated outer frame. Sale exclusively to commercial businesses, with no warranty of any kind. Subject to errors and prior sale. Tsdpfszcpyqsx Abvob

Condition: used, maximum load weight: 37,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 06/2010, Platform B = 12,000 Tjdpozci Sajfx Abveb 18 t fifth-wheel load, 3-axle semi-trailer Turning radius 2,300 mm to the rear Loading length 13,500 mm, loading width 2,550 mm Loading height 1,370 mm SMB axles Last axle liftable Air suspension Lashing rings 3 rows of stake pockets

Condition: used, maximum load weight: 31,620 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 02/2016, Platform B = 12,000 mm Loading length: 13,500 mm, loading width: 2,480 mm Loading height: 1,200 mm SAF axles Last axle steered (trailing axle) Air suspension Todpfxjx I U E Dj Abvjb Lift axle Widening boards Transverse stake strips Stake pockets in frame Container locks for 2x 20- and 40-foot containers

Condition: new, maximum load weight: 42,900 kg, overall weight: 55,000 kg, axle configuration: 3 axles, loading space length: 29,000 mm, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment list. Full specification available on request. LOADING PLATFORM: * Gooseneck, length approx. 3,900 mm with central beam * Loading platform with double-extension, length approx. 9,300 mm * A support table approx. 200 mm wide is permanently welded to the central beam * Pneumatic locking with conical locking pin and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective loading platform length (except for the supply to the first and second lock) * Technical fifth wheel load: 25,000 kg for tractor units: 4x2, 6x2 and 6x4 * TPMS tire pressure monitoring system according to ECE R 141 * BPW axles and suspension, all axles forced steered hydro-mechanically, mounted on turntables * Technical axle load: 12,000 kg each. Air suspension with lifting and lowering valve * 275/70 R 22.5 3PMSF twin tyres. Brand of our choice Todpsyvnd Nofx Abvsb * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets * 3 kW electro-hydraulic unit for hydraulic operations * 3 pairs of recessed lashing rings in the outer frame of the gooseneck, foldable outward * At the king pin 1 pair of lashing rings (LC 10,000 daN) – all other lashing rings (LC 5,000 daN) * 3 pairs of stake pockets integrated in the outer frame of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 crosswise stake pocket bar mounted in the floor of the gooseneck, for plug-in stakes approx. 100 x 50 mm * 1 at the rear of the gooseneck * 2" king pin * Mechanical landing gear with 2-speed gearbox and crank * 8 pairs of stake pockets integrated in the outer frame of the loading platform, for plug-in stakes approx. 100 x 50 mm * 10 pairs of recessed lashing rings lying in the outer frame of the loading platform, foldable outward * Rear and front steering operable via cable remote control, with single-track axle control, no installation in the tractor unit required * Last axle with air suspension venting activated when the parking brake is applied * Steel front wall, approx. 1,600 mm high, certified according to EN 12642: 2016 XL * Round NATO socket at the front connection bar (Maeler & Kaege VG 96 917) * 1 LED work light each left and right at the landing gear, wired to the tractor unit connection * Wooden floor approx. 32 mm thick on the gooseneck and loading platform * At the extension tube with large cross-section, one locking position every approx. 500 mm * At the extension tube with small cross-section, one locking position every approx. 1,000 mm, allowing for locking every approx. 500 mm * Cut-outs in the outer frame of the loading platform for hooking lashing straps (LC 2,500 daN) * 4 crosswise stake pocket bars mounted in the loading platform floor, for plug-in stakes approx. 100 x 50 mm * 4 wheel chocks with holder under the loading platform * 1 lockable INOX toolbox, approx. 2,390 x 800 x 500 mm (L x W x H), mounted under the loading platform on the left in direction of travel * 1 additional lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the right in direction of travel * 1 LED work light each left and right in front of the axles, with wiring * 2 axle load gauges mounted on the left side including axle load diagram * 1st axle with automatic lift axle function as well as starting...

Condition: new, maximum load weight: 37,350 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous crossmembers for high ground and point load capacity, with a heavy-duty outer frame. * Loading platform at the rear as a steel welded structure with two welded-in tracks made of 5-hole steel sheet (hole pattern System Lohr/Rolfo) with a length of approximately 2,250 mm, hydraulically lowerable by approximately 350 mm. * Integrated loading platform at the rear of the vehicle, approximately 1,500 mm, hydraulically extendable as a steel welded structure with 5-hole steel sheet (hole pattern System Lohr/Rolfo) cover, light fitting, and 2 ramp compartments and ramp supports. * The drive and control of the rear section are provided by an electric hydraulic unit mounted in a stainless steel box on the left of the chassis, with a radio remote control. * Power supply via the vehicle battery of the towing vehicle. * NATO socket on the front wall, without connecting cable to the tractor unit. Fifth wheel coupling: * 2-inch kingpin, replaceable from below. Under-ride protection: * According to EC, permanently mounted. Support legs: * 2 x 12 t support winches with a 2-speed gearbox. Axles: * 3 x 10 t air-suspended axle unit, manufacturer SAF with disc brake approximately 370 x 45 mm, ABS, wheel connection 10-hole center-mounted ET120, total stroke of the air suspension approximately 200 mm, of which lifting approximately 140 mm and lowering approximately 60 mm, control of the air suspension via hand control with stop function. Steering axle: * 3rd axle as a trailing steering axle with manual and automatic reverse steering lock. Lift axle: * 1st axle automatically liftable, also switchable via operation on the chassis frame or via PIN 12 of the light socket. Tires: * 6 tires, 445/45R19.5, manufacturer of our choice, mounted on rim 14.00X19.5, 10-hole ET120. Fenders: * According to EC, 1/4 PVC fender in front of and behind the wheels of the 1st axle in front and behind, 2nd and 3rd axles in the rear. Tire chock holder: * None Braking system: * Two-line braking system according to EC with EBS, automatic load-dependent control. * Spring brake accumulator as parking brake acting on 2 axles, interlock-protected coupling heads permanently mounted on the front crossmember, without connecting line to the tractor unit. Manufacturer Wabco. Lighting system: * According to EC, 24 volts, multi-chamber rear lights, license plate lights, LED side marker lights, LED position light white in front and LED side marker lights at the rear, 15-pole socket and 2x7-pole sockets permanently mounted on the front crossmember, without connecting lines to the tractor unit. Todpfxoy Up S Ss Abvjb Load securing: * 9 pairs of folding lashing rings evenly distributed, tensile force approximately 8 tons. * 7 pairs of folding lashing rings evenly distributed, tensile force approximately 2.5 tons. * 2 pairs of folding lashing rings at the rear of the vehicle, tensile force approximately 2.5 tons. * In the outer frame, holes for lashing straps at approximately 500 mm intervals. Lashing stakes: * 16 lashing stakes approximately 100/40 mm, approximately 800 mm usable length. Lashing stake pockets: * 8 each on each side embedded in the outer frame. * 4 rows of stake pockets transverse to the loading area. Fl

Condition: new, maximum load weight: 36,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, total height: 1,250 mm, Equipment: ABS, MAX Trailer Type 210 NEW | Hydraulic Steering - Extendable | 36t Payload | 3 Axles | from €76,900 -- New vehicle – custom-configurable for your specific application. High payload capacity combined with robust construction and maximum efficiency. ----Highlights: • Extendable load platform with pneumatic locking • Multiple high-strength lashing points for optimal load securing Todpfxoypaz So Abveb • Hydro-mechanically steered BPW axles with disc brakes • Air suspension with lift and lower function • WABCO EBS braking system compliant with EU regulations • Mechanical JOST landing legs with 2-speed gearbox • LED lighting system • Tire Pressure Monitoring System (TPMS) ----Construction & Durability: • High-strength fine-grain steel structure • Metallized chassis with premium corrosion protection • Multi-layer paint finish with additional cavity sealing • Hard-wearing wooden floor in sturdy Omega profiles ----Inclusive Options: • Comfortable auxiliary steering via cable remote control • Electro-hydraulic unit • Galvanized front wall (approx. 1,200 mm) • EN 12642-XL body structure • 10 pairs of stake pockets for flexible load securing • Spare wheel carrier under the platform • Beacon holder • Reflective tape & European reflective plates • Air couplings at the front ----Additional equipment and individual adaptations are always possible – we configure your vehicle exactly to your requirements. Sample image. Equipment may vary depending on configuration.

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, Equipment: ABS, New vehicle / stock vehicle / incoming unit – also individually configurable / from €29,900 For sale: Wielton construction material semi-trailer, designed for professional use in the transport of building materials and general cargo. Note: The following equipment list describes a current stock or pre-ordered vehicle. Deviations may occur depending on the specific vehicle, production status, or individual customer configuration. Chassis Load floor made of 30 mm phenolic resin-coated plywood, load capacity 7.5 t * Steel lamp bracket, 371 mm * 19 pairs of lashing rings, each rated at 2.0 t * Rubber-steel impact bumpers at rear * Foldable rear underrun protection * Rear underrun protection in steel Todpfx Aoypa A Aebveb * Side underrun protection in aluminium Axles and Suspension 3 rigid axles * SAF disc brake axles, 3 × 9,000 kg, 22.5" INTRADISC * 1st axle liftable * No axle lift on the 3rd axle * Fifth wheel height approx. 1,120 mm Landing Legs SAF Hercules two-speed landing gear, full load Mudguards PVC mudguards, quarter shell type, 2 front / 2 rear Rims 6 × steel rims 22.5 × 11.75, ET-120 * Nut covers for wheel bolts * No spare rim Tyres 6 × 385/65 R22.5, manufacturer’s choice Options: * GOODYEAR KMAX G2 T M+S 3PMSF, Rolling resistance: B | Wet grip: C | Noise: 71 dB * BRIDGESTONE Ecopia H-TRAILER 002 M+S 3PMSF, Rolling resistance: A | Wet grip: B | Noise: 68 dB * No spare tyre Other Chassis Equipment 2 × toolboxes, each 165 l * Spare wheel holder * Extendable width indicator boards Body Bulkhead H = 1,800 mm, with galvanized steel cover up to top edge * Side walls 1,000 mm * Bolt-on side walls * Foldable rear side wall Braking System / Pneumatics WABCO braking system with basic modulator * RSS / RSP * Aluminium air tanks * RTR automatic self-levelling * Braking system WABCO or Knorr with H-S-valve Electrical System Full LED lighting Aspöck ECOLED II * Flashing side marker lights * 2 LED reversing spotlights * 2 × 7-pin + 1 × 15-pin, incl. EBS connection * No connecting cables to tractor unit Paintwork / Surface Frame hot-dip galvanized, unpainted * Side walls anodized, unpainted Additional Systems ABERG TPMS tyre pressure and temperature monitoring * Sensors on the rims * Control unit connected to EBS * Developed for semi-trailers and trailers Marking Partial contour marking with Wielton logo * Side white, rear red * Wielton warning stickers * Vehicle designation in German Further features and individual adaptations available at any time – we configure your vehicle according to your requirements. Sample photo. Equipment may vary depending on individual configuration.

Condition: new, maximum load weight: 33,380 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Kässbohrer SPJ 3 Platform Trailer – Versatile Use | Robust | from €35,500 New vehicle – individually configurable for your specific application. Robust platform trailer designed for the universal transport of various goods. Engineered for high payload capacity, durable construction, and maximum everyday practicality. Highlights • Universal platform trailer • High payload with stable frame construction • BPW axles with air suspension • EBS braking system with stability control • Versatile lashing and securing options • Ideal for construction, industry, machinery, and general cargo transportation Technical Specifications • Axles: 3 axles • Gross weight: 39,000 kg • Axle load: 27,000 kg • Fifth wheel load: 12,000 kg Tedpfx Abeypa Dasvjb • Platform length: varies depending on configuration • Speed: 80 km/h • Chassis: air suspension with lifting/lowering function Standard Equipment • High-strength steel frame construction • Platform floor designed for high point and surface loads • Multiple lashing points for securing cargo • BPW axles with drum brakes • WABCO / KNORR EBS brake system (2S/2M) • Electronic air suspension • LED lighting system according to EU regulations • Rear underrun protection as per ECE Included Options • Spare wheel holder • Toolbox • Side underrun protection • Lashing rings / lashing points as required • Warning signs and reflectors according to EU regulations • Preparation for additional bodies or special solutions Further equipment and individual adaptations available at any time – we configure your vehicle exactly according to your requirements. Sample photo. Equipment may vary depending on configuration.

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, Equipment: ABS, New vehicle / stock vehicle / incoming? Also available as MEGA variant / from €24,200,-- For sale is a Wielton Platform Master semi-trailer, designed for heavy-duty and flexible use in construction materials, steel, and long-length cargo transport. The vehicle is available in standard trailer height, and optionally as a MEGA version. Note: The following equipment specification refers to a current stock or pre-ordered vehicle. Variations depending on the vehicle, production status or individual customer configuration are possible. ----Chassis / Frame Frame as double longitudinal beam with welded cross members and side rail * Welded construction from high-strength S700 steel * Perforated outer frame with continuous lashing options * SAFETY LOCK system: approx. 60 lashing holes per side * Designed for a coupling height of 1,120 mm (MEGA version with reduced coupling height optionally available) * 19 pairs of lashing rings, each rated at 2.0 t, integrated in the side rail * 26 stake pockets, 81 × 81 mm, as per drawing * Workspace according to ISO 1726:2003, weight-optimized construction ----Axles and Running Gear 3 axles, each with 9,000 kg load capacity * SAF axles with air suspension and disc brakes (ET120) Tedpfx Abjypa Aievjb * Brake discs Ø 430 mm * 1st axle is lift axle * 2" king pin, corner dimension 2,040 mm * 2 mechanical landing legs, brand SAF * Single-sided landing leg operation, right side ----Chassis Accessories 2 plastic wheel chocks with holder * Extendable rear access ladder with large tread surface, UVV compliant * Large rubber impact buffers, rear, side reinforced with steel, at rear frame * Side underrun protection as per ECE R73, made of lightweight composite material * Rear underrun protection, steel, according to ECE R58 * Full PVC mudguards * 2 PVC toolboxes, each 165 l * 12 removable stakes, 80 × 80 mm, length 1,500 mm * 12 stake holders * Spare wheel holder omitted * Extendable widening panels ----Braking System / Pneumatics Brake system according to ECE directive * Two-line compressed air brake system, make WABCO, ADR-compliant * EBS system WABCO 2S/2M with RSS * Raise and lower system * Brake line connections at front bulkhead * Standard air connections as per ISO * Aluminium air tanks ----Lights and Electrics Composite lamp carrier * Lighting system 24 V according to ECE R48, brand Aspöck EP III * 2 seven-chamber multifunction rear lights * LED license plate lighting * 2 LED outline marker lights * LED side marker lights * 2 × 7-pin + 1 × 15-pin sockets at front incl. EBS socket (without connection cables) * Electrical installation and preparation for amber warning beacon * 2 additional LED reverse lights ----Wheels and Tyres 6 x 385/65 R 22.5 tyres * 6 × steel rims 11.75 × 22.5, ET120 * Premium tyres BRIDGESTONE ECOPIA H002 M+S * Wheel nut covers ----Floor 30 mm anti-slip phenolic plywood, multiple bonded, non-slip and waterproof, premium brand Koskisen * Sealed cut edges * Full perimeter caulking * Forklift rated up to 7,500 kg axle load ----Superstructure Bulkhead 1,800 mm high * Bulkhead and front corner posts in natural aluminium ----Paint / Colour Details All steel parts double shot-blasted * KTL primer for optimum corrosion protection * Dust-free robot top coat * Frame: RAL 7021 black grey / anthracite * Landing legs: black, powder coated * Axles: black * Rims: silver * Wheel hubs: black * Side underrun protection: white * Rear lamp carrier: white * Underrun protection: white

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,540 mm, total height: 1,250 mm, Equipment: ABS, WEB Trailer PRSH 27 NEW | Flatbed Semi-Trailer | Hardwood Floor | Container-Compatible | for €30,500 !!! New vehicle – customized configuration available to suit your application. Robust flatbed semi-trailer with hardwood floor for a wide range of transport tasks. Suitable for container transport (20 ft / 40 ft) as well as conventional general cargo and machinery transport. --- Highlights --- • Flatbed trailer with 27 mm hardwood floor • Container-compatible: 1×40 ft / 1×20 ft (centered) / 2×20 ft • Single tires R22.5 • High lashing forces – certified lashing points • Lift axle with start-assist function • Durable WEB-Trailer quality for daily use --- Technical Data --- • Chassis length: approx. 13,510 mm • Chassis width: approx. 2,540 mm • Ride height unladen: approx. 1,250 mm (at 1,120 mm fifth-wheel height) • Max. kingpin load: approx. 16,000 kg • Axles: 3 × 9,000 kg, disc brakes • Axle spacing: 1,310 / 1,310 mm • Tires: 385/65 R22.5 --- Standard Equipment --- • Crossmembers IPE 80, spacing approx. 400 mm • Outer frame U-profile 160×120×5 mm • Lashing bars top & bottom every 1,200 mm, certified (5 t) • 8 pairs of stake pockets 80×50 mm • 6 pairs of container locks (twistlocks) • Front wall 1,200 mm, sheet metal paneling • Holder for plug-in stanchions on the front wall • 24 t telescopic landing gear • EBS braking system • 1st axle lift axle, automatic, with start-assist function • LED lighting system 24 V, 15-pin • Rear underrun protection, rectangular tubing • Rear access ladder with platform --- Floor & Cargo Securing --- • 27 mm hardwood floor in omega profiles • Weatherproof floor for open flatbeds • Certified forklift axle load 9.0 t according to DIN EN 283 • Comprehensive lashing options for flexible cargo securing --- Included Options --- • Extending red/white warning boards (rear & landing gear) • Large bent lamp bracket Todpjypa Iljfx Abvob • Open toolbox made of perforated sheet metal • License plate lighting & track marker lamps • Front wall painted in RAL 9006 silver • Chassis MB 7350 nova gray • KTL coating with zinc phosphating + powder Further equipment and custom modifications available upon request. We configure your vehicle precisely to your specifications. Sample photo. Equipment may vary depending on configuration.

Condition: new, maximum load weight: 37,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, total height: 1,250 mm, Equipment: ABS, MAX Trailer Type 200 NEW | Extendable | 37t Payload | 3 Axles | from €57,000 Tedpsypazxofx Abveb New vehicle – individually configurable according to your application needs. High payload capacity thanks to robust construction and maximum cost efficiency. Highlights: - Extendable loading platform with pneumatic locking - Numerous heavy-duty lashing points for optimal load securing - BPW axles, air-suspended with disc brakes and lift/lower function - Self-steering axles with electromagnetic reverse lock - WABCO EBS brake system in accordance with EU regulations - Sturdy steel construction with high-grade corrosion protection - LED lighting system - Mechanical JOST landing legs with 2-speed gearbox - Tire pressure monitoring system (TPMS) Construction & Body - High-strength fine-grained steel structure for long service life - Metallized chassis with additional cavity sealing - Multilayer paint structure for optimal protection - Durable wooden floor in reinforced omega profiles Includes options: - Galvanized front wall (approx. 1,200 mm) - Spare wheel carrier under the loading platform - 10 pairs of stake pockets for flexible load securing - EN 12642-XL compliant body - Reflective tape & European reflector plates - Mounts for warning signs incl. socket - Beacon holder - Air couplings at the front Additional equipment and individual adaptation possible at any time – we configure your vehicle precisely to your requirements. Sample photo. Actual equipment may vary depending on configuration.

Condition: used, maximum load weight: 36,040 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 05/2027, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Regular ladder frame in lightweight steel construction with continuous crossmembers * With extended chassis frame * Coupling plate approx. 8 mm thick, with a 2-inch kingpin according to DIN 74080 / ISO 337 * Axle lift mechanism on axle 1 * Three-axle unit SAF INTRADISC, with disc brakes Ø 430 mm, offset 120 * Air suspension with approx. 180 mm travel Tires: * Wheels with internal sensors according to UN ECE R141 * Tires 6x 385/65 R 22.5 UNIROYAL TH 506, steel rims 22.5 x 11.75, offset approx. 120 mm * Chassis components: * Mechanical landing gear with leveling foot, approx. 24 t lifting capacity, single-sided operation on the right side * Storage box for: 10 side panels, folding stakes, and rear flap, completely enclosed, protected against spray water, and simultaneously serving as lateral protection * 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm, mounted at the rear, 1x left and 1x right Braking / Air Suspension System: * EBS system 2S/2M with stability program (includes ABS/ALB function) * EBS connector ISO 7638 (without connecting lines) * Parking brake as spring brake, external pneumatic connections as well as external EBS diagnostic connection via ISO 7638 connector * WABCO EBS system * Air suspension system including 1 raising and lowering valve, mounted on the left side behind the axle unit * Driving position is automatically adjusted * 2 non-interchangeable coupling heads at the front ISO 1728 * Air tanks for braking system and air reserve made of steel (EN 286-2) Floor: * Plate floor approx. 30 mm thick, multiple-ply glued plywood * Floor sealed around the perimeter * Pocket for square tube inserts approx. 80 x 80 mm Front wall: * Storage for max. 14 square tube inserts approx. 80 x 80 (length 1,990 mm) on the inside of the front wall * Approx. 2,000 mm high with steel corner posts, with profiled steel sheet, screwed/riveted to the frame * 2 pairs of lashing points (permissible lashing force approx. 1,000 kg per ring) on the front wall according to EN 12640 * N o t e: When using the front wall for securing the load, suitable lashing straps must be used for tensioning if the vehicle is operated without side panels and a rear flap Tedpfjy Trwujx Abvsb Rear wall: * ATTENTION: Hinge mount for folding rear wall 600 mm as well as stake mount for folding corner stakes at the rear, however, the folding rear wall and corner stakes at the rear are OMITTED. Side wall: * VarioFix steel outer frame, 4 pairs of stake mounts for folding stakes on the outer frame (evenly distributed), WITHOUT folding stakes, pair of lashing brackets in the outer frame (according to EN 12640), permissible tensile force approx. 5,000 kg per ring. Side panels: * ATTENTION: Hinge mount for 5 pairs of side panels on the outer frame as well as side panel stop mounted on the corner posts at the front, however, the 5 pairs of side panels are OMITTED. Electrical system / Electronics: * Lamp carrier made of steel, arranged above the underrun protection * KÖGEL LUXIMA Premium package, consisting of: LED license plate lighting, LED marker lights and reflectors at the front, flashing LED side marker lights, Superseal and bayonet connectors for the lights * 2 LED outline lights with pendulum bracket * 2 multi-chamber tail lights *

Condition: new, overall weight: 42,000 kg, axle configuration: 3 axles, total width: 2,550 mm, total height: 1,180 mm, Equipment: ABS, Availability: Immediately NEW VEHICLE Kässbohrer Platform Light MEGA SPS 3 # Empty weight 6,100 kg # Fifth wheel load 15,000 kg # Fifth wheel height: 980mm # BPW axles with disc brakes # 1st axle as lift axle # Jost support feet 24t # Wabco 4S/2M EBS with RSS # 2 x 7 and 1 x 15-pin electrical connections # 24V lighting system Aspöck # Tires 6 x 445/45 R19.5 branded tires on steel rims # 2 plastic wheel chocks Equipment: # 30 mm hardwood floor # Over-width device (4x over-width panels galvanized with LEDs + 1x rotating beacon) # 2 stainless steel tool boxes in the direction of travel right & left # 6x2 Jost container locks, retractable # Stake holder mounted on front wall + 20 stanchions (1500 mm) # 4 rows of stake pockets # 10 x 2 stake pockets in the frame # 7 x 2 lashing rings 4t on the platform 108 lashing points in the outer frame with 2t each # Side walls 600mm high & removable including depot under the vehicle Tedpfxsvm Nm Is Abvjb # Chassis KTL coated and painted in RAL 3020 # Front wall RAL 3020 ----Errors, changes and prior sale reserved! Location: KTH-Trailer GmbH in Goch

Condition: used, maximum load weight: 29,200 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2007, loading space length: 13,470 mm, loading space width: 2,470 mm, Equipment: ABS, Foedisch FOEAPL13.6 Platform Payload 29200 kg Tires 385/65 R 22.5 Todpfeu Ddldox Abvob Lift axle 1st axle Trailer length 13800 mm Loading area L x W 13470 x 2470 mm Loading height approx. 1400 mm

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately and at short notice, on our website. Excerpt from the equipment list. Full specifications available on request. Chassis: * Welded construction made from high-quality steel profiles with thru-profile cross members. Designed for high point loads. Coupling device: * Fifth wheel plate with 2-inch kingpin Underrun protection: Tsdpfx Asy Auhzsbvob * According to EC regulations, bolted design Side guard: * According to EC regulations Landing legs: * 2 x 12 t landing legs with compensation foot and single-sided operation on the right in direction of travel Axles: * 3 x 9 t air suspension axle assembly, SAF brand, with disc brakes approx. 430 x 45 mm, wheel fixing mid-centered ET120, ABS, total air suspension lift approx. 180 mm, of which lift approx. 110 mm and lower approx. 70 mm * Air suspension operated via hand control valve with stop function Steering: * Last axle forcibly steered by linkage Axle lift: * First axle liftable, with fully automatic, load-dependent lift control Brake system: * Two-line compressed air brake system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, anti-mix couplings fixed to front cross member, without connecting line to motor vehicle * Wabco brand Tyres: * Sixfold, 385/65 R22.5 160J on rim 11.75 x 22.5 ET 120 - brand at our discretion. Incl. tire pressure monitoring system, tire pressure display in cab (pre-installed by chassis manufacturer) Mudguards: * According to EC regulations, 1/4 PVC mudguards in front of and behind axle assembly Load securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t) * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t) * Drilled holes in outer frame every approx. 500 mm for lashing straps (straps can be hooked in with closed drop sides, beveled outer frame) Stake pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed * 4 rows of stake pockets across the loading platform * Plug-in stakes: 20 galvanised tubular stakes approx. 80/50 mm, total length approx. 1,000 mm * Magazine for 20 plug-in stakes on the inside of the front wall Front bulkhead: * Reinforced steel bulkhead, fixed, interior covered with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor, recessed into the outer frame Side walls: * 4 x 250 mm side walls and rear wall made of anodised aluminium hollow sections, foldable and removable, removable Kinnegrip stakes * Side wall and stake magazine under the chassis * Left and right insertion rails for side walls and stakes Lighting system: * According to EC regulations, 24 Volt with multi-chamber lights, LED side marker lights, LED position lights front white, LED outline marker lights at rear, license plate lights * 1x 15-pin and 2x 7-pin plug sockets on front cross member Equipment: * Two wheel chocks with holders * Warning signs according to ECE 70 * Work spotlight on lamp bracket (operated via reverse gear) * Holder for rotating beacon at rear, incl. beacon * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm Paintwork: * Chassis and front bulkhead sandblasted, primed and coated in a single colour * Chassis: hot-dip galvanised + RAL colour of choice * Front bulkhead: RAL colour of choice * Side walls: anodised aluminium * Top stakes front bulkhead: hot-dip galvanised * Hubs: KTL blac

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: Todpsyz E T Ssfx Abveb * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: new, overall weight: 43,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete range of vehicles, including immediately and soon available units, on our website. Equipment excerpt; full equipment details available on request. Chassis: * Welded construction made from high-quality steel profiles with through cross beams, designed for high point loads * Underrun bar width approx. 700 mm * Outer frame as UNP profile * Fifth wheel plate approx. 8mm * Neck height at front approx. 130 mm Coupling device * 2-inch kingpin Rear underrun protection * Bolted version, in compliance with EC regulations Side underrun protection * According to EC regulations, made of anodised aluminium profiles Landing legs * 2 x 12 t landing legs with compensating foot and single-side operation, RHS in direction of travel Axles * 3 x 9 t air suspension axle assemblies, disc brakes 22.5” * Total stroke approx. 180 mm * Lifting and lowering device via rotary slide valve Braking system * Twin-line compressed air braking system to EC specifications, with EBS and RSS, automatic load-dependent control * Spring chamber cylinders as parking brake * Polarity-protected coupling heads permanently mounted on front cross member, without connecting line to towing vehicle Tyres * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, brand of our choice * Tyre pressure monitoring system (TPMS) via EBS CAN bus Mudguards * According to EC regulations Todpfx Absw U H Sboveb Spare wheel holder not included Load securing * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 5.0 t * 9 pairs of foldable lashing rings, evenly distributed, max. tensile force approx. 2.0 t * Drill holes for attaching lashing straps every approx. 400–600 mm in the outer frame Front wall * Reinforced fixed steel structure, approx. 1,400 mm high * Inner face lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor let into the outer frame with galvanised omega steel profiles Lighting system * In compliance with EC, 24 volt, with multi-chamber lights * LED side marker lights * Front white LED position lights * Rear LED outline marker lights * Number plate lights * LED lane departure lights * 1x15- and 2x7-pin plug connections at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning boards * Bracket for rotating beacon, incl. rotating beacon * 2 rubber buffers at the rear * Foldable and extendable access ladder at rear right (without platform) * 1 open perforated sheet metal box, transverse to direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: RAL single colour as requested * Chassis: hot dip galvanised * Outer frame: hot dip galvanised + single RAL colour as requested * Centre stanchions: single RAL colour as requested * SSV: aluminium, anodised * Rear underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised / KTL black * Rims: silver Conspicuity markings * Complete set in yellow Including special equipment * First axle liftable, with fully automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets across the loading area * 20 stanchions made of galvanised tube 80/50, total length approx. 1,200 mm * Magazine for 20 removable stanchions inside the front wall * 5 x 25 side walls and rear wall made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Side wall and stanchi

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle stock, with vehicles available for immediate and short-term delivery, on our website. Extract from the equipment list. Full specification available on request. Chassis: * Chassis frame construction with welded longitudinal beams and through-running cross members * Rear underrun bar approximately 700 mm wide * Fifth wheel plate at least 8 mm thick, fitted between the longitudinal beams * Maximum cross member spacing 400 mm (for longitudinal floor installation) * 3.5-inch kingpin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside Landing Gears: * 24 t JOST - MODUL CH (Heavy Duty) telescopic landing gear with S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension unit with 10 t load capacity each, lift and lower device with 1 rotary valve Knorr/Wabco * Holder for lift and lower device, bolted design Braking system: * Smartboard/TIM/Infocenter at the lift/lower holder, additionally to the lift/lower valve, without battery (operable only with towing unit) * Mount for light and brake at the front underrun bar, total height approx. 700 mm * Basic version tire pressure monitoring, connected to CAN bus system of the EBS * With double-release valve for brake and spring brake actuator * Test port for brake cylinder pressure on the front right brake cylinder * 1 red and 1 yellow coupling head each * Lift and lower device mounted at rear left in driving direction * EBS braking system by Wabco, EBS diagnostic via CAN bus (EBS plug), no external diagnostic cable! Tyres: * 8 x 445/65 R 22.5 – premium brand of our choice * Centering rings Lubrication: * Grease nipple strips at the bogies and front steering, no central lubrication Superstructure: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of front wall (facing rear), switch at lift/lower holder * Front wall for platform design, heavy duty * Side outline marking yellow, rear yellow * Front wall approx. 800 mm high, with metal cladding, bolted Lighting: * 2x LED work lights fitted in lamp panel, controlled by reverse gear * 2x LED work lights, controlled by reverse gear, one each side near the landing gear * 2x LED reversing lights, one each side in front of first axle * Lighting/wiring system, brand of our choice * Number plate illumination * The towing vehicle must supply sufficient power for the selected lighting (especially reverse light) * Position lights front, bottom, white, one each side (LED) * 24 volt lighting system with large multifunction light Tsdpfxowx Dcts Abvob * Flashing side marker lights (LED) * 1x 15-pin and 2x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane marker lights (LED) Floor: * Hardwood floor approx. 28 mm thick, alternately with galvanized omega steel profiles Paint/Coating (no metallic finishes): * Chassis painted in RAL color of your choice, front wall (steel construction) in RAL color of choice * Axle hubs in chassis color * Axles and landing gear black * Wheels in aluminum/silver similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 lashing plates welded into the outer frame per side, lashing capacity max. 3,000 daN * 12 RUD-SLP lashing points per side with

Condition: new, maximum load weight: 52,810 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of immediately and soon available vehicles on our website. Excerpt from the equipment list. Full specifications available on request. Cargo area: * Cargo area with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing legs: * Hydraulic landing legs TPMS: * TPMS tire pressure monitoring system compliant with ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor must be capable of transmitting and displaying these data. Axles and suspension: * BPW axles, technical capacity 12,000 kg each, first axle fixed, all others hydro-mechanically forced-steered, mounted on turntables * Air-suspended with lift and lower valve * Axle toolkit Tires: * Tires 445/65 R 22.5 169 K Electrical system: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets * Connections according to standards. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Brake system: * Wabco brake system compliant with EU regulations, with EBS-E (4S3M), without connecting lines to the tractor unit Steel construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield point 355MPa), S690QL/S700MC (yield point 690MPa) Painting: * Complete steel structure automatically shot-blasted after welding using a shot-blasting machine * Secondary blasting with corundum for optimal adhesion of the coating system * Final painting with 2 coats of 2K topcoat, single color in RAL 1007 Narcissus Yellow according to RAL system 841GL * Rear section metallized and painted in RAL 9010 Pure White * Wheels in Silver Grey * Paint structure tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Including accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch king pin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection strip * On the gooseneck and rear panel left and right, each with a bracket for warning signs including socket * Rear steering from the front and rear by cable remote control via push buttons, with single-track control of the axles (without installation in the tractor unit) * Electro-hydraulic unit * 12 pairs of stake pockets for approx. 100 x 50 mm stakes in the outer frame of the cargo area * Load manometer for determining axle loads including load diagram * Lift axle on the front axle, controlled by TEBS E * 5 pairs of crosswise stake pocket rails on the cargo area, for approx. 100 x 50 mm stakes * One INOX toolbox 1,200 x 460 x 550 mm mounted at the front left under the cargo area (in direction of travel) * 1 shunting coupling with reinforcement bolted to the rear cross member * BEKAMAX (Pico) automatic central lubrication system with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) Tjdpfxoxttc Ao Abvsb

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2023, loading space length: 13,500 mm, loading space width: 2,540 mm, Equipment: ABS, Schwarzmüller platform – extendable – with trailing steering – galvanized Extension: 4,000 mm Air suspension Hardwood floor Rung pockets incl. rungs Aluminum rims Overwidth sign Perforated outer frame Tedpfxey Tr D Us Abvsb Rung rail SAF trailing steering axle Lift axle Tires: 385/65R22.5 Spray galvanizing