Used Other Semitrailers With Work Platform for sale (121)

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 06/2003, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Schwarzmüller platform semi-trailer | BPW axles with disc brakes | Year of manufacture: 2008 | Spare wheel holder | Pallet box | Toolbox | Tyres: 385/65 R22.5 | Subject to errors, input mistakes, and prior sale. Hedpsxx Nlwofx Ahzsg

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 09/2017, loading space length: 13,620 mm, loading space width: 2,480 mm, Equipment: ABS, Panav NP036 LowDeck Original platform First registration: 9/2017 1st and 3rd axle with lift function BPW axles Stake pockets 8 container locks – container twistlocks Disc brakes ABS Tyres: 445/45 R19.5 Hedpfxsx E Iuas Ahzsg Condition: 1st axle: 7 and 14 mm 2nd axle: 15 mm 3rd axle: 11 and 6 mm Operating weight: 6,100 kg Gross weight: 36,000 kg.

Condition: used, maximum load weight: 29,440 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2012, next inspection (TÜV): 05/2026, loading space length: 13,500 mm, loading space width: 2,450 mm, total width: 2,550 mm, Year of construction: 2012, Equipment: ABS, KRONE SD FLATBED BPW WINCHES----VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST Hsdpfx Ahsxtr Uqozsg ----VEHICLE EQUIPMENT ----VEHICLE DATA * TRAILER: FLATBED * AXLES: 3-AXLE * AXLE MANUFACTURER: BPW * SUSPENSION: FULL AIR SUSPENSION * BRAKES: DISC BRAKES ----EQUIPMENT * TOOLBOX: 2X * STORAGE FOR STAKES: AVAILABLE * WINCHES: 12X (6 PER SIDE) ----TYRES * TYRES: 385/55 R22.5 (ALL) ----DIMENSIONS * LOADING LENGTH: 13.5 M * LOADING WIDTH: 2.45 M * FRONT HEIGHT: APPROX. 2.6 M ----* EXPORT SALES ONLY WITH DEPOSIT (MIN. 500€ - 2,000€) * EXPORT SALES ONLY WITH DEPOSIT MIN. 500€ - 2,000€ ----EXPORT DECLARATION CUSTOMS EXW IN 10 MINS (AUTHORISED EXPORTER) 5 DAY, 15 DAY, 30 DAY PLATES AND 15 DAY AUSTRIAN PLATES EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID A deposit of at least €500.00 / €1,000.00 will be charged for sales to EU & third countries Changes, errors and prior sale excepted! You can find more vehicles on our website Sales are made exclusively according to our terms & conditions – see homepage Important notice – Important information: Despite careful verification of all details in our offer, errors can occur. Some of these may be due to transmission errors from the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it serves as information for contract initiation. The details provided here are without guarantee and do not represent guaranteed characteristics.

Condition: used, maximum load weight: 25,380 kg, overall weight: 32,400 kg, axle configuration: 3 axles, first registration: 01/2004, Year of construction: 2004, Equipment: ABS, * Cardi trailer * Platform * Steering axle Hjdpfxewtwx Rs Ahzjg * Air suspension * Disc brakes * Tires: see pictures * Twistlock attachment * Gross vehicle weight: 32,400 kg * Unladen weight: 7,020 kg * Payload: 25,380 kg * Available immediately * Errors excepted We offer: Net purchase for companies from the EU with a VAT ID number and customers from outside of the EU. Leasing and financing. Completion of all customs formalities. Issuance of short-term and export license plates. Transport to the port. All prices in classified ads are gross prices and already include the statutory VAT rate of 19%. Cardi trailer Platform Steering axle Air suspension Disc brakes Tires: see pictures Twistlock attachment Gross weight: 32,400 kg Unloaded weight: 7,020 kg Payload: 25,380 kg Immediately available We offer: Net purchase for companies from the EU with a VAT ID number and customers from third countries. Leasing and financing. Completion of all customs formalities. Issuance of temporary and export license plates. Transport to the port.

Condition: used, maximum load weight: 34,700 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 05/2007, Equipment: ABS, Vehicle Identification No.: W09P3H32770D04072 Telescopic extension up to 7,700 mm with sliding table Hjdpfx Ahsw Nl Auszog German MOT (HU) due BPW Eco axles with drum brakes 3 forced-steered axles Platform dimensions: 13,450 mm - Loading height: 1,320 mm Stake pockets in the floor, some with stakes Width marker lighting Toolbox Central lubrication system Tyres: 385/65 R 22.5 Spare wheel carrier WITH spare wheel Subject to change, prior sale, and errors excepted. This description serves for general identification of the vehicle and does not constitute a warranty in the legal sense. The contract description is decisive. Our offer is generally without new technical inspection (TÜV). If a new inspection is required, we will gladly provide an offer from our partner workshops! The vehicle may feature advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2004, * Caster steering axle * Air suspension * Bulkhead Hodpfowi Edmjx Ahzeg * Unladen weight: 6,200 kg -----Internal vehicle number: 9150-----Subject to errors and prior sale.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2021, Year of construction: 2021, Visit our website to view our complete vehicle inventory with many more photos and information available in multiple languages. SEL 8248 Berger SAPL 24 German registration / first owner First registration: 09.11.2021 Year of manufacture: 2021 Gross vehicle weight (kg): 39,000 Permissible total weight (kg): 39,000 Empty weight (kg): 4,000 Hjdpfx Aoxz Uw Djhzjg VIN: VCBUSLARTMFZT1099 TIRES AND AXLES: Tyres: 385/65 R 22.5 Axle configuration: 3 axles SAF Air suspension Disc brakes BODY: Internal dimensions: Width (m): 2.49 Length (m): 13.62 VEHICLE DOCUMENTATION: Registration certificate part I (Fahrzeugschein) Registration certificate part II (Fahrzeugbrief) Additional documents available upon request for a fee. M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosanski) L. OBODYNSKA Ukrainian/українська, Russian/русский We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN While every effort has been made to ensure the accuracy of the information, we cannot accept liability for errors or omissions. Customers are requested to consult the available photographs. The stated measurements are approximate values. Our vehicles are sold as-is, in their current condition. We encourage customers to visit our facility to inspect the vehicle in person. Test drives are also available upon request. Please note that the batteries delivered with the vehicle are those currently installed; should you require new batteries, we are happy to provide pricing information.

Condition: used, maximum load weight: 37,420 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 03/2015, loading space length: 16,900 mm, loading space width: 2,540 mm, total width: 2,540 mm, total height: 3,000 mm, Year of construction: 2015, Equipment: ABS, HRD SPTM4A Mega Teleskopischen Auflieger Serial number: W09SPTM4NFEN10031 Erstzulassung: 24-03-2015 SAF Achsen Liftachse 2 Nachlauf Gelenckte Achsen Drum brakes with ABS and EBS Luftfederung Reifen:235/75 R17.5 40%, Total weight: 48,000 kg, Leather weight: 10,420 kg, Nutzload: 37,420 kg, Total length: 1290 cm. + 400 eskoppierbar Loading height: 95 cm. Hedpfx Ahoxzmg Rjzjg Alu Auffahrrampen Total length: 13.30 m, width 2.54 m, height 3.00 m. Container Drehverschlusse Fuer 2x20 Fuss,1x40 Fuss.,1x 20 Fuss In Die Mitte Zurrösen Rungentaschen Irrtümer / Schreibfehler und Zwischenverkauf Vorbehalten

Condition: new, maximum load weight: 36,245 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate and short-term delivery, on our website. Extract from the specifications. Full equipment details available upon request. Loading Area: * Loading platform with hardwood floor and approx. 1,000 mm x 8° rear bevel * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of fold-out external lashing rings (LC 5,000 daN) * 2 pairs of fold-out external lashing rings (LC 10,000 daN) Hedpjw Tpqqefx Ahzsg * Cutouts in the outer frame for securing straps (LC 2,000 daN) Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW air-suspended axles * Disc brakes (approx. 377 mm) * Raise/lower function (ET 120) * Axle tools Tyres: * Tyres 435/50 R 19.5 – brand at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit via standardised EBS interface as per ISO 11992. The tractor unit must be able to transmit and display this data for correct functionality. Brake System: * Wabco braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor Steel Construction: * High-strength fine-grain steel frame construction * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system compliant with EU regulations * Lighting: 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection panel with sockets: 24N, 24S & 15-pin according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding * Second blasting with corundum for optimal adhesion of the coating system * Complete vehicle chassis metallised with ZINACOR 850 (85% zinc / 15% aluminium) for best possible corrosion protection * Final painting with two coats of 2K topcoat, single colour, RAL 3002 Carmine Red according to RAL 841GL * Rear section metallised and painted RAL 9010 (Pure White) * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax * Metallic paint not possible Including the following additional equipment: * Yellow-red air couplings on galvanised front connector strip * 4 wheel chocks with holder * 2-inch king pin * Loading platform with heavy-duty hardwood floor * 1 spare wheel carrier under the loading platform, right in driving direction * Galvanised folding supports under the rear loading platform bevel * 9 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform * 1 galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Central beam with painted sand layer for anti-slip protection * 1 stainless steel toolbox (INOX), crosswise under the loading platform, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container locks in the loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container * 3 pairs of transverse stake pocket strips mounted in the platform, for plug-in stakes approx. 100 x 50 mm * Holder for up to 9 pairs of plug-in stakes, approx. 100 x 50 mm, bolted inside the front wall * 2 stainless steel (INOX) toolboxes under the loading platform left and right, approx. 600 x 350 x 600 mm * Holder for aluminium drive-on ramps, crosswise under the loading platform, behind the axles

Condition: used, maximum load weight: 24,590 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 06/2010, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 700 mm, total width: 2,550 mm, total height: 2,750 mm, Equipment: ABS, ABS, EBS, BPW EcoPlus axle(s), last axle steered, TRIDEC steering, disc brake system, air suspension with lifting and lowering device, lift axle, screen-printed floor, 6 x stake pocket rail(s) in the middle of the loading area, continuous lashing holes in the outer frame, 2x storage box, vehicle can be fitted with advertising and/or lettering Hodpfx Aoi S H N Djhzsg Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: used, empty load weight: 6,560 kg, maximum load weight: 26,920 kg, overall weight: 33,500 kg, axle configuration: 3 axles, first registration: 05/2012, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Schwarzmüller flatbed trailer | BPW axles with disc brakes | Year of manufacture: 2012 | Spare wheel holder | Toolbox | Tyres: 385/65 R22.5 | Subject to errors and prior sale. Hjdpfsxtdq Rjx Ahzeg

Condition: used, overall weight: 18,500 kg, axle configuration: 1 axle, first registration: 12/1983, * Forced steering * BPW axles Hedpjwi Edtofx Ahzeg * Drum brakes * Bulkhead * Unladen weight: 3,280 kg * Gross vehicle weight: 18,500 kg -----Internal vehicle number: 9796----Subject to errors and prior sale.

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2021, Year of construction: 2021, Visit our website to view our full inventory of vehicles, including many more photographs and detailed information available in several languages. SEL 8249 Berger SAPL 24 German registration / First owner First registration: 09.11.2021 Year of manufacture: 2021 Technical permissible total weight (kg): 39,000 Permissible total weight (kg): 39,000 Unladen weight (kg): 4,000 VIN: VCBUSLARTMFZT1100 Technical inspection (TÜV) valid until: 02/2026 TIRES AND AXLES: Tires: 385/65 R 22.5 Axle configuration: 3 axles (SAF) Air suspension Disc brakes BODY: Internal dimensions: Width (m): 2.48 Length (m): 13.62 VEHICLE DOCUMENTS: Registration certificate (Schein) Registration document (Brief) Additional documents available upon request for an additional fee. M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO Hsdpfx Ahoxynk Uszog j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosnian) L. OBODYNSKA (Ukrainian, Russian) We speak: German, English, Italian, Spanish, Portuguese, Ukrainian, Russian, Polish, Bosnian While every effort has been made to ensure the accuracy of this information, we cannot accept liability for errors or omissions. We kindly advise our customers to refer to the available photographs. Dimensions provided are approximate values. Our vehicles are sold in the actual condition as seen. We invite customers to visit our premises for a personal inspection of the vehicle’s condition, and we also offer the option of a test drive. Please note: the batteries provided with the vehicle are those currently installed. If you require new batteries, please contact us for pricing information.

Condition: used, maximum load weight: 32,660 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2013, Equipment: ABS, Vehicle identification number: WKESD00000580961 Own weight: 6,340 kg DE HU due SAF axles with disc brakes LIFT AXLE PALLET BOX Rack pockets in the floor, WITHOUT stanchions Widening lighting Suitable for forklifts Tires: 385/65 R 22.5 Spare wheel holder WITHOUT spare wheel Changes, prior sale and errors are expressly reserved. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description according to the purchase contract is decisive. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Hjdpfx Aoiac Iuehzjg

Condition: used, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 06/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment. Complete equipment list available upon request. Loading Platform: * Gooseneck, approx. 4,100 mm long, with central beam * Loading platform in double-extendable design, approx. 9,400 mm long, with pneumatically operated locking mechanism * A fixed intermediate table, approx. 200 mm wide, is welded to the central beam * Supply lines are routed protected inside the extendable beams and automatically adapt to the respective loading platform length (exception: supply to the first locking mechanism) * For tractor units: 4 x 2 and 6 x 2 Axles and Suspension: * BPW axles and suspension, all axles hydro-mechanically force-steered, mounted on turntables * Technical air suspension with lift and lower valve Tyres: * 235/75 R 17.5 3PMSF twin tyres Hjdpfxew E A Ego Ahzjg * Brand of our choice. Load index 143/141J (144/144F) Braking System: * WABCO EBS-E braking system according to EU regulations Metallisation: * Complete HRM metallisation (High Resistance Metallisation) * Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%) Painting: * 6-coat final treatment: Entire steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of adhesion primer. Final topcoat: 2 coats of 2-component acrylic paint, single colour, followed by cavity sealing with special wax * Trailer colour: RAL 3002 Carmine Red * Wheel rim colour: Silver grey * Lamp bracket colour: RAL 9010 Pure White Included Accessories: * Steel front wall, approx. 1,600 mm high, certified version according to EN12642:2016 XL. Max. load capacity: 20,000 daN * 4 pairs of recessed lashing rings in the gooseneck outer frame: the front 3 pairs fitted horizontally (LC 10,000 daN), rear pair fold-out to the outside (LC 10,000 daN) * 4 pairs of stake pockets set into the gooseneck outer frame for plug-in stakes approx. 100 x 50 mm * 1 transverse stake pocket rail mounted at the rear in the gooseneck floor for plug-in stakes approx. 100 x 50 mm * 2-inch kingpin * 4 wheel chocks with holders in front of the front wall * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B, static test bearing capacity approx. 50,000 kg * On gooseneck and loading platform, wooden flooring approx. 32 mm thick, framed in aluminium omega profiles * Large cross-section extension tube with a locking point every approx. 500 mm * Small cross-section extension tube with a locking point every approx. 1,000 mm, providing a locking interval of approx. 500 mm * 10 pairs of recessed horizontal lashing rings in the outer frame of the loading platform, fold-out to the outside: one pair before the last axle and one pair at the end crossmember of the trailer (LC 10,000 daN each), all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets set into the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm * 3 transverse stake pocket rails mounted in the loading platform floor for plug-in stakes approx. 100 x 50 mm * 1 spare wheel carrier under the loading area on the right-hand side (direction of travel) * 1 lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading area on the left (direction of travel) * Access ladder mounted on the right (direction of travel) * Last axle with air bellows venting activated by operating the parking brake * 3 kW electr

Condition: used, maximum load weight: 30,250 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2014, next inspection (TÜV): 06/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2014, Equipment: ABS, Schwarzmüller Platform Flatbed Trailer Lift Axle Permissible total weight: 36,000 kg, Unladen weight: 5,750 kg, Payload: 30,250 kg, SAF axles, Lift axle 1st axle, Air suspension, Hodowqyrhspfx Ahzog Disc brakes, Underride protection right, left, and rear, 2x storage compartment right, 1x storage compartment left, Rubber rear impact buffer, 2x extensible wide load signs at the front, 2x extensible wide load signs at the rear, 2x crank supports operable from right side, EBS, ABS, Perforated external frame with hole spacing approx. 100 mm, Wheelbase: approx. 6,350 + 1,310 + 1,310 mm, External dimensions LxW: approx. 13,840 x 2,550 mm, Loading area LxW: approx. 13,620 x 2,480 mm, Front wall height: approx. 2,400 mm, Loading height: approx. 1,250 mm, Tires: 385/65R22.5, Tread depth tires left front: 4 mm, Tread depth tires left middle: 16 mm, Tread depth tires left rear: 8 mm, Tread depth tires right front: 5 mm, Tread depth tires right middle: 15 mm, Tread depth tires right rear: 10 mm, Further equipment: Reinforced steel frame welded construction for point load 20 t over 4 m at frame center of gravity for ASH unladen 1,090 - 1,190 mm with air-suspended tractor, replaceable 2" kingpin (EU installation size, corner dimension 2,040 mm), Perforated external frame with hole spacing approx. 100 mm, oval hole 40/25 mm according to DIN EN 12640 Air suspension with lift and lower function (approx. +120/-80 mm), Automatic setting of driving level from 15 km/h, SAF "Intradisc-plus-Integral" air suspension unit with low-maintenance disc brakes, ø 430 mm, 3 x 9 t rigid, wheelbase 2 x 1,310 mm, Front axle automatically liftable = 2-sided lift (1 x 96307) lifts and lowers automatically depending on weight (when lift axle is raised, the loading or total height increases by approx. 50 mm) and additionally with forced lowering incl. integrated start-up aid limited by speed for button operation in the cab (without button installation), 1 odometer = hubodometer (ECO-Meter) (KIT No. 10801, with hubcap KIT No. 52917) (on 2nd axle front right), Mech. 2 x 12 t support winches, single-sided operation and push compensation, Two-line brake, EBS-E - electronic brake system (Wabco 2S2M = one axle = 2nd axle monitored), RSS - stability program, Spring-loaded parking brake on 2 axles, Aluminum air tank, unpainted, Plywood floor 27 mm, flush with outer frame, 2 steel hat profile rails above the longitudinal beams plus additional 12 mm plywood floor, beveled to the outer frame, Fixed aluminum hollow profile front wall 2,400 mm with 2 center supports,

Condition: used, maximum load weight: 33,900 kg, overall weight: 39,000 kg, first registration: 09/2005, total width: 2,550 mm, total height: 2,770 mm, Equipment: ABS, Air brake, drum brake, BPW axles, wooden floor, used vehicle Hodpfx Ahexxwdhezeg Vehicle no. 3244, air brake ALB/ABV, 3x tool box, side underrun protection left + right, unladen weight: 5,100 kg, gross weight: 39,000 kg, BPW axles with drum brakes, Alcoa aluminium rims, tyre size: 385/55R 22.5, wooden cargo floor, container mounts, stake pockets, cargo area dimensions LxW: 13,520 x 2,550 mm. For enquiries please... Subject to errors and prior sale.

Condition: used, overall weight: 20,000 kg, axle configuration: 1 axle, first registration: 08/1984, * Forced steering * Air suspension * Storage box * Unladen weight: 4,500 kg -----Internal vehicle number: 9797----Subject to errors and prior sale. Hjdpfxjwip Ddj Ahzjg

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2021, Year of construction: 2021, Visit our website to view our entire inventory, including many more photos and detailed information available in multiple languages. SEL 8247 Berger SAPL 24 German registration / 1st owner First registration: 09.11.2021 Year of manufacture: 2021 Gross vehicle weight rating (kg): 39,000 Permissible total weight (kg): 39,000 Tare weight (kg): 4,000 VIN: VCBUSLARTMFZT1098 Next inspection (HU): 12.2025 TIRES AND AXLES: Tires: 385/65 R 22.5 Axle configuration: 3 axles SAF Air suspension Disc brakes BODY: Internal dimensions: Width (m): 2.48 Length (m): 13.62 VEHICLE DOCUMENTS: Registration certificate part I (Fahrzeugschein) Registration certificate part II (Fahrzeugbrief) Additional documents available upon request for an extra charge. M. BUFANO (Italiano, English, Deutsch) J. CORDEIRO Hjdpfxjxynk Is Ahzog (Português, Español, Italiano, English) J. MARJANOVIC (Deutsch, Bosanski) L. OBODYNSKA (Ukrainian/українська, Russian/русский) We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN. While every effort has been made to ensure the accuracy of the information provided, we cannot accept liability for any errors or omissions. We kindly ask our customers to review the photos provided. All dimensions are approximate. Our vehicles are sold in their current condition. We invite customers to visit our premises to inspect the vehicle in person. Test drives are available upon request. Please note that the vehicle is supplied with the batteries currently installed. If you require new batteries, we are happy to provide price information.

Condition: used, maximum load weight: 29,330 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 10/2011, Equipment: ABS, Fahrzeug-Ident-Nr.: WMP2S0630BCBL4246 Own weight: 8,670 kg DE HU due Technical fifth wheel load front: 18,000 kg Kingpin 2 inch - Swing radius front 1,900 mm / rear 2,000 mm Technical rear axle loads: 2 x 10,000 kg BPW Eco Plus axles with disc brakes Axle 2 = STEERING AXLE (FORCIBLE) Dimensions: 13,800 x 2,550 mm Loading height: approx. 1,500 mm Widening lighting Container holder Stake pockets, including stakes Support feet Central lubrication system 4 x toolbox 1 x storage compartment - sheet metal Hodpomn Ni Hefx Ahzjg 1 x front storage box Central lubrication system Tires: 425/65 R 22.5 Spare wheel holder WITH spare wheel Subject to alterations, prior sale and errors excepted. The description serves the general identification of the vehicle and does not constitute a warranty in the sense of sales law. The description according to the purchase contract is decisive. Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms of delivery and payment apply.

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment features. Full equipment list available upon request. - Gooseneck, approx. 4,100 mm in length with central beam - Load platform with double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydromechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with raise and lower valve - Twin tires 235/75 R 17.5 3PMSF - WABCO braking system, EBS-E - 3 kW electro-hydraulic unit for hydraulic operations. Without installation of supply connections on the tractor unit - 4 pairs of stake pockets integrated in the outer frame of the gooseneck, suitable for insertable stakes approx. 100 x 50 mm - 2-inch king pin - 8 pairs of stake pockets integrated in the outer frame of the loading area, suitable for insertable stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left-hand side in direction of travel - Remote steering control from front and rear using cable remote with push buttons, with axle tracking control, without installation in the tractor unit Hodpjwvzg Rofx Ahzsg - 2 axle load gauges mounted on the left side - Steel front wall, approx. 1,600 mm high - 3 transverse rows of stake pockets mounted in the floor of the loading area for insertable stakes approx. 100 x 50 mm - 1 transverse row of stake pockets mounted in the floor of the gooseneck for insertable stakes approx. 100 x 50 mm - 1 additional lockable INOX toolbox, mounted under the loading area - WADER container pockets in the loading area for transporting: 2x 20' containers or 1x 40' container - Central automatic lubrication system with 2 pumps, BEKAMAX brand - Complete HRM Metalization (High Resistance Metallisation)

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2011, loading space length: 13,600 mm, loading space width: 2,490 mm, Equipment: ABS, * 8338 - Vehicle ID for telephone inquiries Hjdpfexwtbaox Ahzeg * ABS, EBS, BPW Eco-Plus axles, disc brakes, air suspension with lift and lower function, storage boxes, overwidth warning signs, bar for hanging ramps at the rear, rear support legs, front wall * Tires 1st axle: 445/45R19.5 (13 / 11 mm) * Tires 2nd axle: 445/45R19.5 (13 / 11 mm) * Tires 3rd axle: 445/45R19.5 (9 / 10 mm) ----our email address:     our service for you:       - Procurement of temporary or customs license plates       - Transfer/delivery EU-wide       - Customs clearance for export to non-EU countries If you have questions in Russian, you can call the following number * WhatsApp just for Russian speakers: * WhatsApp for English, German, and other languages:

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2020, Year of construction: 2020, Visit our website, where you will find our complete vehicle inventory with many additional photos and information in multiple languages. SEL 8201 Berger SAPL 24 German registration / 1 owner First registration: 19.11.2020 Year of manufacture: 2020 Technical gross weight (kg): 39,000 Permitted total weight (kg): 39,000 Unladen weight (kg): 4,000 VIN: VCBUSLARTLFZT0713 MOT valid until: 01/2026 TYRES AND AXLES: Tyres: 385/65 R 22.5 Axle configuration: 3 axles Air suspension Disc brakes BODY: Hodpfx Ahexwr E Djzog Internal dimensions: Width (m): 2.48 Length (m): 13.66 VEHICLE DOCUMENTS: Registration certificate part 1 (Fahrzeugschein) Registration certificate part 2 (Brief) Additional documents available on request for a surcharge. M. BUFANO (Italiano, English, Deutsch) J. CORDEIRO (Português, Español, Italiano, English) J. MARJANOVIC (Deutsch, Bosanski) L. OBODYNSKA (Ukrainian, Russian) We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN While every effort has been made to ensure the accuracy of the information, we cannot accept liability for any errors or omissions. We kindly ask our customers to consult the available photos. The listed measurements are approximate figures. Our vehicles are sold in their current condition as seen. We invite customers to visit our premises to personally inspect the condition of the vehicle. We also offer the possibility for a test drive. Please note that the batteries supplied with the vehicle are those currently installed. Should the customer require new batteries, we are happy to provide price information.

Condition: used, maximum load weight: 37,535 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and soon-available vehicles, on our website. The following is an excerpt from the equipment specification. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated locking mechanism * 7 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), fitted with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Self-steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M), without connecting lines to tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame by a two-component (2K) zinc dust primer * High-quality single-color topcoat (2K) in RAL 3002 carmine red * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings on galvanised front connector bar * 4 wheel chocks with holders * 2" king pin * Yellow reflective tape compliant with EU-standard on sides, extension and trailer rear * European reflector boards (red-yellow) on rear of trailer * Loading platform with approx. 30 mm thick wooden floor encased in Omega profiles * 10 pairs of stake pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Storage for up to 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall * 1 spare wheel holder under the loading platform on the left in the driving direction, without spare wheel Hedpfx Ahexgk U Nszog * One mudflap at the rear of the trailer * Manual and documentation on USB stick * Bracket for rotating beacon at the rear of the trailer * On gooseneck and rear panel, left and right, one holder each for warning signs, including socket * Speed stickers 80 km/h, rear and both sides * Load gauge for axle load determination including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets on loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * INOX toolbox, approx. 600 x 350 x 600 mm, under the platform on the left in the driving direction * 4 pairs of longitudinal stake pocket rails for 80 x 50 mm insertable stanchions mounted on the loading platform * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on rear panel * HRM metallisation (High Resistance Metallisation)

Condition: used, maximum load weight: 38,080 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specifications available upon request. Loading Platform: * Extending loading platform with pneumatically operated locking mechanism * Loading platform with approx. 30 mm thick wooden floor framed in omega profiles * 7 pairs of folding external lashing rings (LC 5,000 daN) Hodpfxoxf Sifj Ahzsg * 3 pairs of folding external lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension * All axles hydro-mechanically forced-steered * Equipped with disc brakes * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lift and lower valve * Axle tools Tyres: * Tyres: 385/65 R 22.5 Braking System: * Braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor Warning Signs: * Mountings on the gooseneck and rear panel left and right for warning signs, including socket Electrical System: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin, connection according to ISO 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel structure made of high-strength fine-grained steels * Steel grades S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * First-class, durable corrosion protection for the standard grit-blasted welded frame, guaranteed by a two-component zinc dust primer * High-quality, single-colour two-component topcoat in RAL 3002 carmine red * Rims in silver, add-on parts as per manufacturer's choice * Rear section metallized and painted in RAL 9010 pure white Included Accessories: * 2-inch kingpin * 4 wheel chocks with brackets on the front wall * Remote steering, front and rear, cable-operated by push buttons, with single-track control of the axles (without installation in the tractor) * Manual and description on USB stick * Electro-hydraulic unit * Galvanized connection strip at front, yellow-red air couplings * Yellow reflective tape according to EU regulations on the sides, extension and rear of the trailer * European reflective panels (red-yellow) on the rear of the trailer * One mud flap at the rear of the trailer * Mounting for rotating beacon at the rear of the trailer * 10 pairs of pocket sockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform * 1 spare wheel holder under the platform on the right-hand side * Speed stickers 80 km/h on the rear and on both sides * Load manometer for determining axle loads including load chart * Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the platform for: 1 x 20' container, 2 x 20' container or 1 x 40' container; an additional locking point is provided in the extension for a 45' container * 4 pairs of transverse stanchion strip pockets for plug-in stanchions approx. 100 x 50 mm * Storage for plug-in stanchions on the inside of the front wall * Access ladder installed on both left and right side in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted under the loading platform at the front left in the direction of travel * One add