Used Fliegl Lowbed Semitrailers for sale (344)

Condition: used, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 08/2026, total length: 7,350 mm, total width: 2,550 mm, total height: 2,300 mm, Year of construction: 2012, Equipment: ABS, * Air suspension * Disc brakes * BPW axles * Support on the drawbar Cjdpfszwym Nox Apherh * 50 mm eye * Spring-assisted side flaps * and more.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 14,300 kg, maximum load weight: 9,700 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space width: 2,520 mm, loading space height: 900 mm, total length: 12,000 mm, total width: 2,550 mm, suspension: air, tire size: 235 / 75 r 17,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Further Information Chassis Steel welded construction Turntable with robust ball bearing Foldable rear support 2 wheel chocks + holder Aluminum side underrun protection Splash guards at the rear over the entire width Quarter panel fenders in front of the 1st axle Excavator arm recess starting above the rear axles to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing points of 5 tons each in the excavator arm recess on the side of the longitudinal frame, approx. 300 mm from the front and approx. 200 mm in front of the rear slope 1 storage box recessed in the gooseneck in the floor with a lid, W=720 mm/ L=520 mm / D= 170 mm 1st pair of wheel recesses recessed in the gooseneck in the low-loader wheel well area, sloped for access, length at the bottom approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main beam area is 400 mm higher than the wheel recess. 2nd pair of wheel recesses between the axles recessed in the low-loader in the wheel well area, sloped for access, length at the bottom approx. 600, approx. 300 mm deep. Note! Frame in the main beam area is 300 mm higher than the wheel recess. Wheel recess cover pull-out from the main frame, with wood inserts. Distance from the outer frame, beam to beam, approx. 1280 mm Extensions pull-out to 3,000 mm, foldable at the wheel recess extensions (extension not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for wooden planks in the middle of the loading area or under the loading area, depending on technical feasibility Wooden planks 70 mm for extension to 3000 mm Lashing points, low-loader 1 pair of ring lashing points recessed at the front on the gooseneck, each 5 tons 8 pairs of lashing eyes at the top and on the side recessed in the outer frame, each 10 tons 2 x at the front on the gooseneck 6 x in the low-loader, the first lashing point 250 mm from the front and the last one max. 250 mm from the rear, the distance between the lashing points is no more than 1100 mm 5 pairs of ring lashing points recessed in the outer frame, each 5 tons (can be converted to stake pockets) Coupling system, trailer, turntable Drawbar with tested 50 mm drawbar eye with 8° inclined drawbar eye Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned, reducing tire wear and fuel consumption Air suspension with lifting and lowering valve, can be operated separately at the front and rear Wheels and tires 235/75R17.5 according to manufacturer's choice Steel rims in twin arrangement, factory silver Braking system 2-line compressed air brake system Spring-loaded parking brake Crjdpfx Apoi Ri I Nohjh Trailer Info Center for displaying vehicle data such as axle load (no calibrated scale) and odometer Axle load detection via EBS-CAN bus signal, for display on the display in the cab, truck must be suitably prepared, no truck installation (no calibrated scale) Vehicle-driving stability system Duomatic connection at the front, with connecting cable to the towing vehicle EBS, Electronic Braking System with EBS plug at the front, with connecting cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plat

Condition: new, maximum load weight: 25,050 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 950 mm, total width: 2,550 mm, Total weight: 35,000 kg / 48,000 kg Unladen weight: 9,950 kg Payload: 25,050 kg / 38,050 kg Overall length: 21.00 m Loading length: Loading area approx. 13,500 mm / Maximum loading length 21,000 mm Width: 2,550 mm Loading height: 950 mm Further information: New vehicle from current production, pre-series model. Rear support, telescopic 4 outrigger pads with holder 4 pairs of container locks, recessed in the floor for 1 x 40 ft container or 2 x 20 ft container 1 spare wheel holder for 1 spare wheel, with wheel fastening kit, in chassis design 11 pairs of stake pockets recessed in the outer frame, suitable for FR insert stakes 80x50 mm, flush-mounted in the outer frame, with opening for lashing strap or chain attachment 20 stake pockets, B=80 / T=50 / L=1500 mm 1 plastic toolbox 3 pairs of lashing eyes, each with 3.5 tons capacity, mounted in the side frame - in the neck area 13 pairs of folding lashing rings, each with 10,000 daN, freely pivotable and suspended in the side frame profile (also suitable for overwidth lashing). 1 pair of folding lashing rings, each with 10,000 daN, mounted laterally in an intermediate support Air suspension with lifting and lowering function 1st axle automatic lift axle, additionally with forced lowering including starting aid with control button on the semi-trailer, without driver's cab operation with lifting & lowering valve + auto-reset function Wheels and tires 235 / 75 R 17.5" Steel rims in twin arrangement, factory silver 24 Volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin fail-safe sockets at the front, without connection cable 2 additional LED work lights at the rear, switched via reversing light 1 rotating beacon, removable, on the underrun protection 1 x 7-pin socket at the rear 6 side sockets, 2x front panel, 2x support legs, 2x rear end (left + right) 7-pin 2 work lights, sunk into the front wall, including switch 2 pairs of overwidth panels, each with 2 LED outline lights per panel, extendable to the side to 3,500 mm, panels can also be mounted on the loading area (width adjustment stepless) Fixed steel front wall, 1,200 mm high, with sturdy steel corner posts without corner bevel, straight side indentation. 2 lashing holes at the top inside and outside in the front wall corners Frame front hot-dip galvanized + outer frame visible area Csdpfx Apoumha Njhsrh final coated in RAL 3002 carmine red Frame rear hot-dip galvanized + outer frame visible area final coated in RAL 3002 carmine red Front wall RAL 3002 carmine red

Condition: used, axle configuration: 3 axles, first registration: 06/2015, color: other, Year of construction: 2015, Equipment: ABS, = Additional options and accessories = - Lift Axle - Steering axle = Remarks = Fly, 2015, BPW axles, Axle 1 liftable, As 3 guided along, Unloaded by means of a sliding wall = More information = Rear axle 1: Lift axle Cjdsz Dgq Sjpfx Aphorh Rear axle 2: Steering = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801014943, empty load weight: 4,150 kg, maximum load weight: 13,850 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,900 mm, loading space width: 2,480 mm, total length: 8,900 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, Year of construction: 2026, Equipment: center pivot plate, - Attention: archive photos! #Chassis turntable drawbar trailer - Outer frame slightly inclined with "Load-Lock" profile for hooking in lashing straps - 9 pairs of additional lashing eyes recessed in the outer frame, 5 t each - Wheel chocks with holder - Aluminium side guards - Steel underrun protection - Quarter mudguards ahead of and behind each axle - with anti-spray mud flaps - 1 row of lashing/stake rails recessed lengthwise in the centre of the floor (from end of front cross member to start of rear cross member), approx. 80/110 mm high, with cut-outs at top and bottom for Fliegl plug-in stakes 80 x 80 mm; at the bottom an angle plate as stop, half open downwards, for inserting stakes 80 x 80 mm - 3 lashing/stake rails recessed crosswise in the floor (cut-outs approx. 63 x 63 mm) across the full width up to the outer frame, approx. 80/110 mm high, with cut-out - 1 aluminium storage box with stainless steel lid, w=600/h=400/d=500 mm, lockable - Container locking: 2 pairs of locking cut-outs recessed in the floor for 1 x 20 ft container, 2 pairs of container locking adapters #Drawbar turntable trailer - Drawbar with certified 40 mm drawbar eye, mechanically length-adjustable by 6 x 100 mm and lockable - Parking sockets for electrics/EBS and air couplings on drawbar #Axles + suspension - SAF drum brake axles - One axle check rope per axle for turning or loading the trailer - Air suspension with raise & lower valve, front and rear separately operable #Wheels and tyres - 235/75 R 17.5" - make at manufacturer's choice - Steel rims in twin configuration, factory silver - TPMS tyre pressure monitoring system acc. to ECE R 141, display in towing vehicle via EBS Codpfjz Eg N Dex Apherh #Braking system - 2-line compressed-air braking system - Spring-brake parking brake - Duomatic coupling at front, with connecting line to the truck - EBS electronic braking system with EBS socket at front, detachable coiled cable - Attention: the trailer may only be towed by towing vehicles which ensure the effectiveness of the ABS! - Drawbar lock release button and double release valve mounted at front turntable - Vehicle stability system - Axle load detection via EBS CAN bus signal, for display in the driver's cab #Floor - Floor for forklift with gross weight up to 4 900 kg - Film-faced plywood approx. 30 mm thick - Premium floor sealing, joints sealed all round #Paintwork - Frame hot-dip galvanised incl. passivation - 15-year warranty against rust-through - Currently without headboard/dropsides and folding stakes, but available as an option #Headboard/front corner stakes - 25 mm aluminium hollow profile, 1 350 mm high, steel front corner stakes, transversely mounted - Headboard additionally lined inside with 1250 mm high film-faced plywood #Dropsides - 25 mm aluminium hollow profile, 600 mm high, fold-down and removable - without tarpaulin groove - Dropsides with Kinnegrip locks, also at front on headboard #Centre stakes - 2 pairs of folding stakes at dropside height, fold-down and removable, make Kinnegrip (flush or nearly flush with dropsides where possible) #Rear wall/rear corner stakes - 1 pair of folding stakes at dropside height, fold-down and removable, make Kinnegrip - 25 mm aluminium hollow profile, 600 mm high, fold-down and removable, with folding step inside - Attention: archive photos!

Condition: new, empty load weight: 8,900 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,200 mm, loading space width: 2,550 mm, loading space height: 900 mm, total length: 13,300 mm, suspension: air, tire size: 235/75R17,5, color: red, Year of construction: 2026, Equipment: ABS, 3-axle low-loader semi-trailer with 2-piece steel ramps, hydraulic. Extendable width up to 3000 mm, gooseneck with 320 mm ALU side walls. 3rd axle with self-steering and reverse lock. Wooden floor, 70 mm thick. Crodpfx Ajyxfndsphoh

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,900 kg, maximum load weight: 32,100 kg, overall weight: 41,000 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 13,300 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, Low-loader Semi-trailer Steel welded construction, kingpin plate with 2 replaceable kingpins and 2 kingpin positions 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without lateral support Foldable rear support 2 chock blocks with holder Aluminum side protection Fender fairings in front of and behind the axle assembly 1st pair of wheel recesses integrated into the gooseneck area in the low-bed section, angled for easy entry. Length at the bottom approx. 1600 mm, depth of wheel recesses approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. 2nd pair of wheel recesses between axles A and B. Length at the bottom approx. 350 mm, depth approx. 260 mm. Note! Frame in the main beam area is 260 mm higher than the wheel recess. If wheel loaders are to be transported and the overall height needs to be checked, please provide the technical data sheet for the wheel loader models with detailed specifications (if the overall height is exceeded). Wheel recess cover, retractable from the main frame, with wood inserts. Extensions retractable to 3,000 mm (not in the rear slope and not in the wheel recesses at the bottom) Storage compartment for timber planks on the gooseneck, across the front Timber planks, 70 mm, for extension to 3000 mm Tie-down points for low-loader 2 pairs of ring-type tie-down points, 5 tons each, at the front on the gooseneck 11 pairs of tie-down eyes integrated into the top and side of the outer frame, 10 tons each 2 x on the gooseneck, 9 x distributed in the low-loader area, first tie-down point 250 mm from the front and last max. 250 mm from the rear, spacing between tie-down points not greater than 1100 mm 8 pairs of stake pockets integrated into the outer frame, inner dimensions 70 x 40 mm, or, instead of stake pockets, 5-ton ring-type tie-down points embedded in the floor Axles + Suspension SAF drum brake axles Axle/chassis laser-aligned to reduce tire wear and fuel consumption Air suspension Wheels and Tires 235 / 75 R 17.5 Manufacturer's choice Steel rims in twin configuration, factory silver Braking System 2-line pneumatic braking system Spring-loaded parking brake EBS, Electronic Braking System with EBS socket at the front, without connection cable 2 keyed coupling heads at the front With raise and lower valve Axle load detection via EBS-CAN bus signal, for display on the dashboard in the cab; truck must be suitably pre-equipped. Vehicle - Driving Stability System Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole keyed sockets at the front 1 x LED rotating beacon with holder, switched via side lights 2 pairs of warning signs, double LED illuminated and retractable to 3,000 mm, detachable with connector Floor Gooseneck with steel/non-slip steel plate Storage box integrated into the access slope to the gooseneck Then with 70 mm softwood floor, in the wheel recesses at the bottom and in the wheel well area, steel/non-slip steel plate Low-loader platform including rear slope, 9,100 mm Ramps Steel ramps, 2,800 mm long, 750 mm wide, side-shiftable Csdji Ri Hcjpfx Aphjrh Additional ramp securing at the bottom.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, Saddle, and Haulage Company Fine-grained steel welded construction in lightweight design, saddle plate with interchangeable 2 kingpins, main frame reinforcement for 25 tons, with center of gravity at 3 m load length in the retracted state. 13 pairs of hooks for securing lashing straps, welded onto the crossbeams 23 pairs of lashing eyes recessed into the outer frame, each 3.5 tons Outer frame with Load-Lock profile for attaching lashing straps Note! Not usable with sideboards! 24 tons, 2-speed support winch in reinforced design for loaded coupling/uncoupling, single-sided operation Chocks with holder Aluminum side impact protection Under-run protection Half-shell fenders with anti-splash flaps according to EC 1 spare wheel holder for 1 tire, with wheel fastening kit 1 closed storage box for stakes, open at the top, below the loading area, doors on both sides, w=450 mm/h=400/420 mm/d=2460 mm 6 pairs of pull-out stake pockets, for rectangular section stakes 80x80 mm, extendable from loading width of 2000 mm to 3100 mm 4 pairs of stake pockets recessed into the outer frame, for rectangular section stakes 80x80 mm 11 stake pockets recessed in the center of the floor, for rectangular section stakes 80x80 mm, with reinforcement beam, installed between the outer stake pockets 5 x 3 pairs of stake pockets recessed into the outer longitudinal beams, for rectangular section stakes 80x80 mm, including reinforcement beams - for load securing to the front and rear during the transport of reinforcing steel mats, 2x5000 mm or 2x 6000 mm 6 lightweight plug-in stakes, w=80/d=80/, usable height approx. 1850 mm, hot-dip galvanized, with rope guide at the top for strap tensioning 12 lightweight plug-in stakes, w=80/d=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Note: Stake pockets/plug-in stakes are not designed for the sole securing of long materials, pipes, etc. without strapping. 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 steel winches with wire rope and clevis hook, with rope guide through the outer frame, 1 removable gearhead for steel winch - supplied loose Telescoping Main frame telescoping Crsdpsi Ri Szofx Aphjh extendable by a maximum of 4,000 mm and lockable every approx. 500 mm Locking with pneumatic pin locking + indicator for frame locking on both sides, operated via hand knob, operation for brake/locking and suspension on the control panel on the left side in front of the axles Storage compartment between the longitudinal beams in the extended state Axles + Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing arm, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand knob, as well as manually via switch in the towing vehicle (Pin 10), without truck installation. Axle track offset mm Air suspension 1st axle automatic lift axle, additionally electrically operable from the truck, with starting aid Braking System 2-line compressed air braking system Colored line routing for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front EBS manufacturer according to the manufacturer's choice, electronic braking system with EBS

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,350 kg, maximum load weight: 28,650 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: silver, Year of construction: 2026, #Plateau semi-trailer Mega - Bespoke transport solution – configure your Fliegl vehicle to your requirements; vehicle shown is an example, production and equipment individually to customer specification #Chassis – general haulage semi-trailer - Fine-grain steel welded construction - Fifth wheel plate with replaceable 2" kingpin - Reinforced frame for high payload, also suitable for vehicle transport - Outer frame with "Load-Lock-Profil" at approx. 400 mm centres for lashing strap attachment - 10 pairs of lashing points recessed top/outside in outer frame, 10 t each - Foldable rear support legs - 2 wheel chocks with holder - Aluminium side impact protection - Galvanised steel underrun protection - Quarter-shell mudguards ahead of axle 1 and behind each axle, with anti-spray flaps behind each axle - 1 spare wheel holder for 1 spare wheel, with wheel fixing set - 2 lockable plastic toolboxes, W=600/H=425/D=460 mm - Container locks: 4 pairs recessed in floor for 2x20ft or 1x40ft containers, foremost position as recessed folding lock - 10 pairs of stake pockets recessed in outer frame, 70x40 mm internal - 10 stake pockets recessed centrally in floor, 70x40 mm internal - 2 transverse lashing/stake rails recessed in floor, full width to outer frame, approx. 100 mm high, 20 mm round steel bars top and bottom (approx. 60 mm apart), angle-plate base, half open below, for lashing and fitting 80x80 mm stakes #Arrangement - Stake pocket positions 2 and 4 per Fliegl data sheet - 20 plug-in stakes, hot-dip galvanised - Storage space for aluminium loading ramps, ramps slide in from the rear Codpfxszwn Ize Aphsrh - 3 pairs of folding lashing eyes, 10 t, in outer frame #Axles & suspension - SAF disc-brake axles, air suspension - Axle 1 as automatic lift axle, incl. forced lowering and traction aid, activated by braking three times #Braking system - 2-line air braking system, colour-coded lines for easy servicing - Spring-loaded parking brake - 2 anti-mismatch coupling heads at front, no connecting line - EBS with front EBS socket, no connecting cable - Lift/lower valve, 2 ride heights adjustable via hand control (1x 980 mm, 1x 1100 mm coupling height) - Ride height linked to lift axle: raising lift axle increases loading/overall height by 50 mm - Trailer stability system #Wheels & tyres - 435/50 R19.5 steel wheels #Electrics - 24 V, multi-chamber lights - Yellow LED side marker lights - 2 white LED front position lights - 2 white/red outline marker lights at rear - 2x 7-pin and 1x 15-pin anti-mismatch sockets at front - LED work lights at sides, 1x left and 1x right (direction of travel) - 2 additional LED work lights at rear - 1 beacon with holder, switched via side lights - 2 pairs of LED-illuminated warning boards, extendable to 4,000 mm - Additional 7-pin socket in underrun protection #Floor - Phenolic plywood floor approx. 30 mm thick, on longitudinal sub-frames for high point loads, forklift axle load up to max. 7,100 kg #Front wall / front corner posts - 25 mm aluminium hollow profile, 1,350 mm high - Solid steel corner posts (closed, heavy-duty version) - Front wall internally fitted with additional 1,250 mm high phenolic panel ("Crash-Blocker") - Steel impact protection at approx. 140 mm height on lower interior - Internal storage compartment for plug-in stakes

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT33902032084, empty load weight: 4,140 kg, maximum load weight: 33,860 kg, overall weight: 38,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,240 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: white, 25 m³ Aluminium Tipper Body Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. --- ## Wheels * Alcoa Dura-Bright aluminium wheels --- ## Axles & Suspension * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid Cjdswhfiyjpfx Aphsrh * Traction aid activated via “3x braking” * Function active up to 30% axle overload and max. 25 km/h * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust --- ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 1 × 15-pin front socket (without connecting cable) * 2 integrated rear LED work lights, activated via reverse gear --- ## Hydraulic System * High-pressure tipping cylinder, max. 250 bar * Hard-chrome plated first stage * HDK screw coupling, fixed section, NW 48 mm (without hose connection) * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut * Cylinder transferred from the replaced vehicle --- ## Tipping Body – Aluminium Box Body (25 m³) * High-quality wear-resistant aluminium body construction * Sloped 5 mm front wall with external hydraulic cylinder mounting * Side walls made of 30 mm hollow chamber profiles, fully welded * Upper edge profile designed to prevent material build-up * Internal access ladder at front wall (not compatible with Cramaro system) * External shovel and broom holder on front wall * Aerodynamic tapered “Greenline” body design ### Tailgate * “Membrane” rear wall with double-joint hinge system * Externally mounted pendulum tailgate with double hook locking system * Rubber-sealed tailgate * Heat resistant up to max. 170°C ### Floor & Equipment * Continuous 6 mm steel floor * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction) * Central locking on left-hand side --- ## Paint / Finish * Aluminium natural finish (body) * Galvanised or coated components depending on specification --- Optional Note: The cylinder shown may originate from a previous vehicle and is reused depending on configuration.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Type 210, then total weight technically 21,000 kg (special permit required) Gearbox support leg at the front Retractable rear support 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Drawbar with tested 50 mm tow hitch Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake Csdpfozd Eynox Apherh 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 additional LED work light at the rear, switched via reversing light Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 6,200 kg, maximum load weight: 32,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 100 %, color: original, Year of construction: 2026, Save on transport costs! Upon request, up to three curtainsider trailers can be delivered as a space-saving 3-unit stack. Roof and side curtains are supplied separately and can be easily installed after delivery. Benefit from significantly reduced transport costs. Customized transport solution Configure your Fliegl trailer according to your requirements. The shown vehicle is an example only. Production and equipment are customized according to customer specifications. #Chassis Fine-grain steel welded construction with "Preload" neck area reinforcement Fifth wheel plate with replaceable 2" kingpin Outer frame with Load-Lock profile for securing straps 24 t 2-speed landing gear, one-side operation Extendable rear ladder Aluminium side underrun protection Galvanized steel underrun protection Rear impact protection Lockable plastic toolbox, W=600 / H=425 / D=460 mm Storage box for fire extinguisher up to 6 kg #Axles + Suspension Disc brake axles Laser-measured axle and chassis alignment for reduced tyre wear and fuel consumption Air suspension 1st axle automatic lift axle with forced lowering and starting aid (activated by 3x brake operation) #Brake system Dual-line compressed air braking system Colour-coded brake lines for easy service Spring-loaded parking brake 2 non-interchangeable coupling heads at front, without connecting lines EBS electronic braking system with EBS socket at front Raise/lower valve Vehicle height increases by approx. 50 mm when lift axle is raised Vehicle driving stability system #Wheels and tyres 445/45 R19.5" steel rims, factory silver finish #Electrical system 24 V system, multi-chamber lights Yellow LED side marker lights White front position lights White/red rear lane marker lights 2 x 7-pin non-interchangeable sockets at front #Floor Approx. 30 mm phenolic plywood floor panels on longitudinal supports High point load capacity for forklift axle loads up to max. 7,100 kg Rear steel chequer plate flooring approx. 300 mm length #Front wall / Corner posts Height 2,580 mm Steel corner posts in high-volume design Side curtain release system at front wall "Crash Blocker" steel impact protection inside lower area (approx. 140 mm height) Front wall additionally covered inside with 1,250 mm high phenolic plywood panel #Centre posts 3 pairs of sliding posts, movable over full length With 4-fold insertion pockets and long lower pocket 3 post positions 4 rows of aluminium V-insertion slats #Rear wall / Corner posts Steel rear corner posts up to roof height Curtain attachment with round tube and tension ratchet Double-wing rear portal doors with 2 internal rotary bar locks each #Curtain Curtain with welded horizontal and vertical reinforcement belts Stainless steel tension buckles #Roof Sliding roof system with rear end lift function Roof opens from rear to front L-shaped roof beam for automotive industry applications Non-elastic roof with minimal deflection during loading and unloading Cedpfx Apjzmub Hehorh Optimized rain gutter at rear, mounted on top rear cross member above doors EcoLift roof lifting system, height adjustable by approx. 380 mm on both sides with gas spring assistance Complete body supplied loose as a kit (unassembled).

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21201012165, empty load weight: 2,290 kg, maximum load weight: 9,510 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,200 mm, loading space width: 2,480 mm, loading space height: 910 mm, total length: 7,000 mm, total width: 2,550 mm, total height: 910 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, color: silver, Equipment: ABS, - Please note: stock photos! Cedpfx Apoz Akl Tohorh #Chassis – Centre-axle Trailer - Fine-grain steel welded construction - 6 pairs of lashing rings, bolted externally into the floor/outer frame, 5 t each - 2 additional pairs of lashing rings bolted into the floor at the corners, 5 t each - Geared landing leg, front - Folding rear support - 2 wheel chocks with holder - Galvanised steel underrun protection - Rear mudflap, full width (not compatible with forklift pocket mounting) - Quarter-shell mudguards - 1 plastic toolbox with removable tray, W=620/H=360/D=440 mm, lockable with a padlock (lock not included) - 1 row of lashing/stake rails recessed centrally along the floor (from the end of the front cross-member to the start of the rear cross-member), approx. 100 mm high, with 20 mm round steel bars top and bottom, approx. 60 mm apart, closed at the bottom with an angle plate, open on the lower half; for lashing and inserting 80 x 80 mm stakes - Hook-in rail for aluminium ramps at the rear - 1 storage compartment for loading ramps, for ramps 3000 x 360 mm - Centre-axle trailer coupling gear - Drawbar with approved 40 mm towing eye - Drawbar height-adjustable via spindle, max. adjustment range 300 mm #Axles + Suspension - BPW drum-brake axles, axle spacing approx. 990 mm - Laser-measured axle/chassis alignment – reduces tyre wear and fuel consumption - Parabolic suspension with maintenance-free steel/rubber bushings and mechanical axle load equalisation (rocker compensation) #Wheels and Tyres - 235/75 R 17.5" - manufacturer's choice - Steel wheels, factory silver #Braking System - 2-line air braking system - Spring-loaded parking brake - Integral air reservoir - 2 mismatch-proof coupling heads at the front, with connecting lines to the towing vehicle - ABS and ALB, with ABS connector at the front, with connecting cable #Electrics - 24 volt, multi-chamber lights, yellow LED side marker lights - 2 white front position lights - 2 white/red outline marker lights at the rear - 1 x 15-pin connector at the front, with connecting cable #Floor - Steel/chequer-plate floor for high point-load capacity - Film-faced plywood panels, approx. 30 mm thick, for high point-load capacity, bolted-on version - Note: slight floor undulation possible due to weld distortion - Bed length approx. 5,200 mm #Country of Registration/Plates - Country of registration: Germany - with DEKRA inspection and certification (in accordance with §13 EC-FGV) - Down-rated to a permissible gross weight of 9,900 kg – exempts from the six-monthly safety inspection (SP), with correspondingly reduced payload - 24/7 service hotline - prepared for a single-row number plate holder - Contour marking with reflective tape to ECE R048, white on the sides and red at the rear #Paint Finish - Frame hot-dip galvanised incl. passivation, 15-year warranty against corrosion perforation - Note: floor undulation possible due to hot-dip galvanising - Please note: stock photos!

Condition: used, machine/vehicle number: WFDFLT3240100xxxx, Year of construction: 2019, Please provide reference number upon request: 23046 Specifications: 2019 model Length: 998 cm Wheelbase: 136/136 cm Net weight: 4800 kg Max payload: 19,200 kg Owner has paid for the trailer Crjdpfx Apezqlanehsh Ready for delivery   Description: 2019 Fliegl 3 axle container trailer. The owner says he has gone over everything to make sure it is in good condition. Ready for delivery. Technical approved: Yes EU-approved until: 05.02.2027 Own weight: 4800 Total Weight: 19200 Model: 3 akslet container kjerre = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: WFDFLT21802036328, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2025, next inspection (TÜV): 01/2027, total length: 10,020 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 445/45 R19,5", tire condition: 60 %, color: grey, Note: The images shown are archive photos. The vehicle may currently be in use! Tandem-Axle Swap Body Trailer Type TWP 180 Mega-EL WEIGHTS AND DIMENSIONS Gross vehicle weight: 18,000 kg Payload approx.: 14,800 kg Axle assembly load rating: 18,000 kg Support load (drawbar): 1,000 kg Unladen weight (base version) approx. only: 3,200 kg +/- manufacturing tolerance Frame height lowered approx.: 1,010 mm Frame height raised approx.: 1,390 mm Frame height in driving position approx.: 1,070 mm Parking height approx.: 1,040-1,320 mm Standard stop to front locking approx.: 985 mm Locking distance: 5,853 mm Coupling height approx.: 380 mm Parking heights apply on level ground. The towing vehicle must have a similar lift stroke to the trailer, otherwise the body will sit at an angle. CHASSIS - CENTRE-AXLE SWAP BODY TRAILER Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 twist locks with sturdy brackets, 20" base For 7.45 m swap bodies (Note: combined with the underrun protection, this projects beyond a 7.15 m swap body) 1 pair of geared landing legs front, straight foot, single-side operation on the right 1 pair of geared landing legs rear, straight foot, single-side operation on the right 2 wheel chocks with holder Aluminium side underrun protection Steel rear underrun protection Rear mudflaps, full width (not combinable with forklift pocket holder) Half-shell mudguards Mudflaps DRAWBAR / TOWING GEAR (CENTRE-AXLE TRAILER) Drawbar with certified 50 mm towing eye, haulage version Crodszufl Sopfx Aphoh Adjustable drawbar coupling height, 2,200 mm Coupling height: 380 mm AXLES & SUSPENSION SAF disc brake axles Axles/running gear laser-aligned - reduces tyre wear and fuel consumption Air suspension BRAKING SYSTEM Two-line compressed-air braking system Colour-coded line routing for easy servicing Air reservoir capacity: 208 litres Spring-loaded parking brake 2 mismatch-proof coupling heads at front, with connecting lines to the tractor unit, connection on the right 24V EBS (electronic braking system) with EBS plug at front, connecting cable, connection on the right Note: This trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lowered and raised position WHEELS AND TYRES 445/45 R19.5", make at manufacturer's discretion Steel rims, factory silver ELECTRICS 24V multi-chamber lights, yellow LED side marker lights 2 white position lights at front 2 white/red rear outline marker lights 2 x 7-pin mismatch-proof plugs at front, with connecting cable, connection on the right 2 additional LED work lights at the rear, activated via reversing light 1 LED work light front-centre between the beams, facing rearward, activated via reversing light REGISTRATION COUNTRY / PLATES Germany With DEKRA inspection and certificate (acc. to §13 EC-FGV) 24/7 service hotline Prepared for single-line number plate holder Contour marking with reflective tape acc. to ECE R48, white on sides, red at rear PAINT Frame: DB 7350 Nova grey 10-year warranty against corrosion perforation

Condition: used, machine/vehicle number: WFDFLT21601003373, empty load weight: 2,600 kg, maximum load weight: 10,800 kg, overall weight: 13,400 kg, axle configuration: 2 axles, first registration: 11/2013, total length: 5,200 mm, total width: 2,550 mm, tire size: 285/70 R19,5", color: grey, 4 UNITS AVAILABLE! – 4 UNITS AVAILABLE! – 4 UNITS AVAILABLE! – 4 UNITS AVAILABLE! Conversion to CLG dolly in progress – some units already completed. Please note: The photos shown are archive images and may differ from the actual vehicle. # Chassis Heavy-duty fine-grain steel welded construction Fifth wheel coupling (manufacturer of our choice) for 2" kingpin with ball-bearing turntable, steering angle max. 20° Telescopic landing leg 2 wheel chocks with holders Steel rear underrun protection Half-shell mudguards CLG drawbar with certified 50 mm towing eyes for connection to both the dolly and the towing truck. # Axles + Suspension BPW disc brake axles Air suspension with raise/lower valve # Brake System Dual-line compressed air braking system Spring parking brake 2 non-interchangeable air couplings at the front with connecting lines to the towing vehicle 2 non-interchangeable air couplings for the semi-trailer Electronic Braking System (EBS) with front EBS connector and connecting cable EBS connection cable for the semi-trailer Axle load detection for the truck via EBS Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality. # Electrical System 24 V electrical system Multi-chamber lighting Yellow LED side marker lights Csdjzm Trqjpfx Aphsrh 2 white LED front position lights 2 white/red LED rear outline marker lights 1 × 15-pin connector with cable to the towing vehicle 1 × 15-pin connector with cable to the semi-trailer # Registration Prepared for registration in Germany DEKRA approval included Prepared for single-line number plate holder ECE R48 reflective contour markings (white sides, red rear) # Dimensions Fifth wheel height: approx. 1,150 mm Drawbar coupling height: approx. 380 mm Archive photos – actual vehicle may vary.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Crsdpozd Uvljfx Aphoh Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm); towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Brake System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With raise/lower valve, hold function in both lower and raise positions Axle load detection via EBS CAN bus signal, for display in the cab; the truck must be equipped accordingly; no truck installation (no calibrated scale) Tire pressure monitoring system *Wheels and tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, Aspöck Eco LED II multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting, (Note: With certain towing vehicles, false diagnostics may occur even though the system is functioning properly) 2 white LED front position lights 2 white/red rear lane-keeping lights (LED) 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated by the reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the crossbars, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Germany with DEKRA approval and certification (in accordance with §13 EG - FGV) 24/7 service hotline prepared for single-line license plate holders Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint Finish Frame hot-dip galvanized or painted according to customer preference

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,740 kg, maximum load weight: 14,260 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 9,430 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Custom Transport Solution Configure your Fliegl trailer to your individual requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Attention: Archive pictures are used! Chassis Heavy-duty welded steel low-loader turntable trailer chassis Heavy-duty turntable with ball-bearing race Integrated storage box in turntable front section Folding rear support Wheel chocks with holders Csdozl R S Sjpfx Aphjrh Aluminium side underrun protection Full-width rear mud flap Semi-circular mudguards on 1st axle with anti-spray mud flaps Anti-spray mud flaps behind 2nd axle Spare wheel carrier incl. spare wheel (steel rim) Lockable plastic toolbox with shelf (padlock not included) Lashing Equipment 3 pairs of integrated 10 t lashing points at the front 5 pairs of recessed 10 t lashing mushrooms on top and sides of the outer frame Additional 5 t recessed lashing rings instead of stake pockets Maximum spacing between lashing points: 1,200 mm Drawbar Height-adjustable drawbar with certified 40 mm towing eye, angled by 8° Axles & Suspension SAF drum brake axles Laser-aligned axle and suspension geometry for reduced tyre wear and fuel consumption Maintenance-free parabolic spring suspension with steel-rubber bushings Wheels & Tyres 235/75 R17.5 tyres Twin steel wheels, factory silver finish Braking System Dual-line air brake system Spring parking brake Two anti-mix coupling heads with air lines to towing vehicle ABS & ALB with front ABS connector and connection cable Compatible only with towing vehicles supporting ABS functionality Electrical System 24 V lighting system Multi-chamber rear lights Yellow LED side marker lights 2 white front position lights 2 red/white rear outline marker lights 2 × 7-pin front connectors with connection cables Loading Platform Steel deck in front section 70 mm softwood flooring Steel chequer plate over wheel arches Rear beavertail with 70 mm timber flooring Total low-bed loading area incl. beavertail: approx. 7,200 mm Loading Ramps 2 steel loading ramps Length: 2,800 mm Width: 750 mm Side-adjustable Timber-covered Spring-assisted lifting Foldable lower ramp locks to prevent lateral movement Operating Notes A special permit is required for 10,000 kg axle load (approval must be obtained individually in each German federal state). The stated gross vehicle weight is technically possible; depending on the cargo, the maximum permissible weight may not be achievable while complying with legal axle, kingpin and support loads. Registration Registration: Germany EC type approval (2007/46/EC) 24/7 service hotline Prepared for two-line licence plate holder ECE R48 reflective contour marking (white sides, red rear) ECE 70 rear warning plate

Condition: used, first registration: 09/2016, color: other, Year of construction: 2016, Equipment: ABS, = Additional options and accessories = - BPW-Assen Codpoz Eh N Eefx Aphsrh - Drum brakes - Lift Axle = Remarks = Fliegl, 2016, BPW axles, Axle 1 Liftable, Drum brakes = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, machine/vehicle number: WFDFLT33802019846, first registration: 01/2020, tire size: 385/55 R22.5, axle configuration: 3 axles, color: other, suspension: air, total length: 12,250 mm, total width: 2,500 mm, total height: 1,350 mm, Year of construction: 2020, Chassis Chassis height: 100 cm Diameter coupling pin / coupling plate: 2 inch Disc brake: ✓ Structure Dish height: 120 cm Container construction: 2 x 20 ft, 40 ft, 45 ft Tank Fuel: ✓ 3-axle container trailer, Suitable for 2 x 20 ft. 1 x 40 ft or 1 x 45 ft, ABS, BPW axles, Air suspension 1st and 2nd axle lift axle, Disc brakes, Shipment dimensions 1225x250x135 cm = More information = Axle configuration Tyre size: 385/55 R22.5 Make axles: Bpw Brakes: disc brakes Suspension: air suspension Axle 1: Lift axle; Tyre profile left: 35%; Tyre profile right: 35% Axle 2: Tyre profile left: 55%; Tyre profile right: 55% Axle 3: Lift axle; Tyre profile left: 70%; Tyre profile right: 70% Crodeu H E Ryjpfx Aphjh Weights Empty weight: 5.080 kg Carrying capacity: 32.920 kg GVW: 38.000 kg Identification Registration number: C535239 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33902037809, empty load weight: 7,722 kg, maximum load weight: 31,278 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, color: white, Archive photos shown. Vehicle may still be in operation. Fliegl Coil Curtainsider Semi-Trailer Chassis: Approx. 8,040 mm reinforced coil well with coil cover, 8 removable coil posts, 4 pairs of internal coil pockets, 1 pair of lashing adapters for coil posts, 4 pairs of removable 6 t Vario-Lash lashing rings, 7 pairs of 5 t lashing rings in the outer frame, 9 pairs of 5 t lashing rings in the coil well, 1 pair of 5 t lashing points in the longitudinal beam, pallet box for 8 Euro pallets, heavy-duty pallet stops with lashing points, spare wheel carrier, 2 lockable plastic toolboxes, galvanized rear forklift mounting bracket, 5 pairs of outer stake pockets and 3 centre stake pockets compatible with coil stakes. Axles & Suspension: SAF disc brake axles, laser-aligned axle geometry for reduced tyre wear and fuel consumption, TIS automatic tyre inflation and pressure monitoring system, air suspension, automatic lift axle with forced lowering, traction aid and electric truck control. Braking System: Dual-line air brake system with colour-coded air lines, aluminium air tank, spring parking brake, raise/lower valve with auto-reset, AAC Basic automatic unloading axle (manoeuvring aid up to 20 km/h), WABCO SmartBoard displaying axle loads, mileage and diagnostic messages, axle load monitoring via EBS CAN bus. Wheels & Tyres: 435/50 R19.5 tyres with polished aluminium wheels. Electrical: 2 × 7-pin and 1 × 15-pin front sockets (without connecting cables), 2 × 7-pin rear sockets for truck-mounted forklift. Floor: Approx. 30 mm plywood floor for forklift axle loads up to 5,600 kg. Front Wall: Front bulkhead with two pairs of lashing rings and integrated storage compartment accessible from inside. Side Posts: 3 pairs of sliding posts, 5 post positions, 6 widening adapters (+25 mm each). Load Securing: 7 rows of aluminium side slats, 1 pair of Vario steel slats and 1 Vario locking beam for front and rear load securing. Crodpfxszl D Iyj Apheh Roof: Fliegl Blitz sliding roof, Anti-Ice system with central air hose and automatic venting via brake light signal, Fliegl Easy Fix system with 12 pairs of strap holders integrated into the roof bows, EcoLift lifting roof (approx. 380 mm).

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33001012559, empty load weight: 6,250 kg, maximum load weight: 17,750 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,620 mm, loading space width: 2,520 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 860 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: black, Equipment: center pivot plate, Fliegl 3-Axle Low Loader Trailer Chassis – Low Loader Trailer Heavy-duty welded steel chassis construction Turntable steering with heavy-duty ball-bearing slewing ring Codpfx Apjzaznzehjrh Folding rear support legs 2 wheel chocks with holders Aluminium side underrun protection Full-width rear spray flap (not compatible with forklift bracket) Semi-circular mudguards Anti-spray mudflaps on the 1st axle and behind the 2nd and 3rd axles Lockable plastic toolbox with shelf insert (620 × 360 × 440 mm, W × H × D), padlock not included Extendable outriggers for overall loading width up to 3,000 mm Central storage compartment for timber extension planks 70 mm timber extension planks for widening to 3,000 mm Lashing Equipment Heavy-duty lashing points specifically designed for low-loader applications 1 pair of recessed lashing cut-outs in the front gooseneck, each rated at 10 tonnes 4 pairs of lashing slots in the outer frame for lashing straps, each rated at 5 tonnes 7 pairs of recessed mushroom lashing points (top and side mounted), each rated at 10 tonnes 1 pair on the gooseneck 6 pairs in the low-bed section First lashing point positioned 250 mm from the front Last lashing point max. 250 mm from the rear Maximum spacing between lashing points: 1,100 mm 5 pairs of recessed lashing rings in the outer frame, each rated at 5 tonnes (convertible to stake pockets) 2 additional pairs of folding lashing rings, each rated at 10 tonnes 1 pair on the gooseneck 1 pair recessed behind the rear axle 1 pair of heavy-duty bolted lashing rings (JDT type), each rated at 6.7 tonnes, with reinforced flange plate and threaded counter support, mounted on the gooseneck Drawbar Drawbar with certified 40 mm towing eye Parking sockets for electrical, ABS and air connections integrated into the drawbar Axles & Suspension SAF drum brake axles Laser-aligned axles and suspension for reduced tyre wear and lower fuel consumption Air suspension with raise-and-lower valve Front and rear air suspension circuits operated independently Wheels & Tyres 235/75 R17.5 Fulda tyres Twin wheel configuration 6 inner steel rims 6 polished aluminium outer rims Braking System Dual-line compressed air braking system Spring-loaded parking brake Trailer Info Centre displaying operating data including axle loads (not legally calibrated) and mileage Vehicle Stability Control System Axle load detection via EBS CAN bus for display in the truck dashboard (truck preparation required) Two non-interchangeable front coupling heads with connecting hoses to the towing vehicle EBS (Electronic Braking System) with front EBS connector and connecting cable Front gooseneck with steel chequer plate flooring Integrated storage box in the transition ramp area 70 mm larch timber decking behind the gooseneck Steel chequer plate flooring over the wheel arch section Rear loading ramp area with 70 mm larch timber decking Low-bed loading deck including rear incline: 6,500 mm Loading Ramps 2 heavy-duty steel loading ramps Foldable lower ramp locking system to prevent lateral movement Timber-covered ramp surface Spring-assisted lifting mechanism for easy handling

Condition: used, machine/vehicle number: WFDFLT21801005232, empty load weight: 2,650 kg, maximum load weight: 15,350 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 50 %, color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation. Fliegl ZWP 180 Standard – Specifications #Chassis – Swap Body Turntable Trailer Fine-grain steel welded chassis Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers 4 container twist locks with heavy-duty outriggers on a 20' base Suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Aluminium side underrun protection Steel rear underrun protection Quarter fenders at the front and half fenders at the rear Without rear impact protection #Drawbar Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles & Suspension SAF disc brake axles Air suspension #Braking System Dual-line air brake system Spring parking brake Two colour-coded front coupling heads with connecting lines to the tractor unit Electronic Braking System (EBS) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality Raise/lower valve with holding function in both raised and lowered positions #Wheels & Tyres 385/65 R22.5 tyres (manufacturer's choice) Steel wheels, factory silver finish #Electrical System 24 V electrical system Csdpfxjzldqho Aphjrh Multi-chamber lighting Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 2 × 7-pin front connectors with connecting cables Additional LED work light at the rear, activated via the reverse light #Registration & Certification Approved for registration in Germany DEKRA inspection and certification 24/7 service hotline Prepared for single-line licence plate holder ECE R48 contour markings with white reflective tape on the sides and red reflective tape at the rear

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,100 kg, maximum load weight: 14,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,970 mm, total width: 2,550 mm, total height: 1,250 mm, suspension: air, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis for central-axle trailer Fine-grained steel welded construction Front stop, transverse, in a foldable/adjustable design, as previously delivered with AU 257359 1 pair of removable guide rollers, front and rear 1 additional pair of removable guide rollers 4 container locks with sturdy arms based on 20" for swap bodies 7.45 m and 7.82 m 1 pair of front transmission support legs, with straight lower section and single-side operation on the right side 1 pair of rear transmission support legs, with straight lower section and single-side operation on the right side (FR) Side impact protection set inward, for optimal clearance to the swap body supports Credpfxozd U I Uo Aphsh Steel underrun protection *Towing equipment for central-axle trailers Towing beam with certified 50 mm tow eye, freight forwarding version Flat flange plate for tractors with underrun-protected LBW, connected to the drawbar at the top and bottom Drawbar clamped/bolted, easily replaceable and partially adjustable in length! Under-coupler drawbar, free drawbar length approx. 2150 mm Folding bracket with spring support on the drawbar, for routing the connection cables to the truck *Axles + Suspension SAF or BPW disc brake axles “Laser-aligned axles/chassis” reduces tire wear and fuel consumption Travel odometer/odometer Air suspension *Brake System 2-line compressed air brake system Color-coded lines for easy servicing. Air reservoir: 208 liters Spring-loaded parking brake, Control panel in the front right Duomatic connection at the front, with connecting line to the tractor unit, connection in the front right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection in the front right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift & lower valve, hold function in both lower and lift positions Vehicle – Vehicle Stability Control System Brake release function via a pushbutton on the vehicle next to the lift & lower valve, for releasing the brake when coupled; EBS power supply must be ensured! “TPMS” Tire Pressure Monitoring System according to ECE R 141, display in the towing vehicle via EBS *Wheels and Tires 385/65 R22.5" steel rims, factory silver *Electrical System 24 volts, multi-chamber LED lights, yellow LED side lights, LED license plate lights, (Note: With certain towing vehicles, false diagnostic errors may occur even though the system is functioning properly) Yellow LED side lights linked to the turn signals “Flashing side lights” Parking sockets for electrical and air connections on the drawbar 2 white LED front position lights 2 white/red LED rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, located on the right rear 2 additional LED work lights, recessed and integrated into the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration/License Plates Prepared for single-line license plate holder Night parking sign at front and rear *Paint Finish Frame Hot-dip galvanized or painted according to customer preference

Condition: used, maximum load weight: 7,900 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 03/2020, next inspection (TÜV): 04/2027, loading space length: 4,500 mm, loading space width: 2,430 mm, loading space height: 500 mm, loading space volume: 5 m³, total width: 2,550 mm, total height: 1,450 mm, Equipment: ABS, Chassis galvanized, drawbar with adjustable height, an integrated lockable compartment for loading ramps is located under the loading platform, aluminum loading ramps (L x W) 2900 x 350 mm, support jacks, 2 folding supports at the rear, ABS, EBS, GFA axle(s), drum brake system, 5 lashing eyes per side, leaf spring suspension, 1 storage compartment, the vehicle can be fitted with advertising stickers and/or lettering. SI87176 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle can be fitted with advertising stickers and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to prepare a financing or leasing offer for this item. Codjz Hr R Nepfx Apherh Please contact us!