Used Fliegl Dhka Semitrailers for sale (300)

Condition: used, overall weight: 24,000 kg, maximum load weight: 15,700 kg, axle configuration: 3 axles, first registration: 02/2015, Subject to errors and prior sale! Internal number: 1459. 1004538----* Trailer for truck Fliegl DTS 300 with offset * HSN / TSN 7591 11A 000 * Color: matt black * Empty weight (kg) 8,300 * Gross vehicle weight (kg) 24,000 * Payload (kg) 15,700 * Body type: low loader ----The vehicle is unprepared! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing/leasing also possible without a down payment! Cob Ep D Dev Dpwnjhsgt Do you have any questions? We are happy to advise you!

Condition: used, overall weight: 35,000 kg, maximum load weight: 29,500 kg, axle configuration: 3 axles, loading space volume: 52 m³, first registration: 01/2015, next inspection (TÜV): 03/2025, total width: 2,550 mm, total height: 3,750 mm, Equipment: ABS, According to our "General and interpreted terms and conditions" without any guarantee or warranty, we can offer you the following vehicle today, subject to change until completion, errors, typos and prior sale reserved: Fliegl 52 cbm rear tipper, waterproof with vibrator (car 662) EZ: 20.01.2015 permissible GGW 35,000 kg empty 6,500 kg payload 28,500 kg load volume approx. 52 cbm total length 10,745 mm total width 2,550 mm total height 3,750 mm SP 09/ 2025, TÜV 03/ 2025 roll tarpaulin, platform 2 x 12 ton 2-speed geared support winches WABCO ABS load pressure gauge air suspension with lifting & Lowering Steel chassis, aluminum box construction Roll tarpaulin, platform Pivoting flap with combination complete opening of the pendulum flap to the side in the direction of travel to open the entire flap operate the manual oil pump Grain slide with waterproof cover Waterproof trough 10 mm floor Reinforced walls at a height of 1 m 2 x storage box 1st axle lifting axle Mercedes Benz disc ALCOA LM rims Tires 385/65R22, 5 1.) approx. 50/50%, 2.) approx. 70/50%, 3.) approx. 60/50% Ceb Epjvrwg To D Dhegt Spare wheel approx. 80% Vibrator for trough Crash shoe LED reversing light Side ladder mounted Foldable underrun protection Foldable A-blade Price: ¤ 21,000.00 (net) All information without any guarantee or warranty. Our "General and interpreted terms and conditions" apply. The place of jurisdiction for both parties up to a value in dispute of €5,000.00 is the Ludwigslust District Court, and for amounts in dispute exceeding this, the Schwerin Regional Court. Errors, typos and prior sale reserved.

Condition: new, overall weight: 24,000 kg, maximum load weight: 17,400 kg, axle configuration: 3 axles, loading space length: 8,670 mm, loading space width: 2,500 mm, loading space height: 860 mm, total width: 2,520 mm, Vehicle number: - 536 Vehicle / body: low loader First registered: new vehicle Total weight: 24,000kg/ 30,000kg Empty weight: 6,600kg Payload: 17,400kg/ 23,400kg Total length: 10,890mm Cgebjuytxxe Ep D Dhet Loading length: 8,670mm total, 2,520mm offset, 6,500mm loading bed Width: 2,520mm Loading height: 860mm Further information Steel welded construction Turntable with strong ball bearing ring Foldable rear support Wheel chocks with holder Aluminum side impact protection Rear mud flaps across the entire width Half-shell mudguard 1st axle with anti-spray mud flaps Anti-spray mud flaps behind 2nd and 3rd axles 1 plastic tool box, with shelf, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Extensions extendable to 3,000 mm (not in the rear bevel) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width 2,550 mm) Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3,000 mm Lashing eyes for low loader 1 pair of lashing cutouts in the longitudinal beam at the front on the offset, 10 tons each. 5 pairs of lashing holes in the outer frame of the crank, each with 5 tons (tension belt attachment) 7 pairs of lashing mushrooms, set into the outer frame at the top and side, each with 10 tons 1 x at the front on the crank 6 x in the low bed 5 pairs of stake pockets set into the outer frame, inside 70 x 40 mm, (can be converted to 5 ton ring lashing eyes, not included in delivery) 2 additional pairs of folding lashing eyes, each with 10 tons 1 x on the crank (protrudes) 1 x set into the floor behind the last axle Towbar device trailer turntable Draw fork with tested 40 mm drawbar eye Axles + suspension Drum brake axles, at the manufacturer's discretion "Axles/chassis laser-measured" Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical Axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17.5" at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 interchangeable coupling heads at the front, with connecting lines to the towing vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco or Knorr Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red lane keeping lights at the rear 2 x 7-pin, non-interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (light removable) 2 pairs of warning signs with double LED lighting and extendable to 3,000mm Floor Front offset with steel/checker plate covering Storage box embedded in the ramp to the offset then with 70 mm softwood floor, in the wheel arch area steel/checker plate covering Rear slope with 70 mm softwood floor Low loading area including rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Additional ramp protection can be folded down at the bottom Covered with wood (tip area with steel/checker plate) with Spring jack support Paint finish Frame hot-dip galvanized including passivation Ramps hot-dip galvanized plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 €/ net

Condition: used, Year of construction: 2018, Equipment: cabin, ref: 7689 Capacity: 33tonnes Csb Eot Ui T Hop D Dhjgt

Condition: used, overall weight: 35,000 kg, maximum load weight: 28,933 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 3,000 mm, loading space volume: 101 m³, first registration: 08/2015, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Edscha sliding roof * Haldex EBS, ABS, LSV * Toolbox * BPW Eco Plus axles with disc brakes ----* Tire dimensions: 385/55R19.5 * Overall length: 13850 mm * Tare weight: 6097Kg Csb Epovhv H Rs D Dhsgt * TÜv & SP: expired -----Errors & prior sale reserved Vehicle number 5732

Condition: new, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, Daily registration in 06/2024 due to the new TPMS regulation Chassis Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin Outer frame slightly slanted with "Load-Lock profile" for tensioning belt attachment 24 ton. 2-speed support winch, one-side operation Side impact protection aluminum Underrun protection galvanized steel Quarter-shell fenders in front of and behind axle unit with anti-spray splash flaps according to EC Ram protection at the rear Spare wheel holder for 1 electric bike, with wheel mounting kit Axles + suspension SAF disc brake axles with 430 mm disc diameter "Laser-measured axle/chassis" Reduction in tire wear incl. and fuel consumption 1st axle automatic lift axle, can also be operated electrically from the truck including forced lowering and starting aid, without truck installation Brake system 2-line compressed air Brake system Spring-loaded parking brake EBS made by Wabco, electronic braking system with EBS socket at the front, without connecting cable with lifting & lowering valve + auto-reset function Vehicle - driving stability system Axle load detection via EBS-Canbus signal, for display on display Wheels and tires 385/65 R22.5" / 6 steel rims, factory silver Electrics 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red lane keeping lights at the rear 2 x 7-pin and 1 x 15-pin, non-interchangeable sockets at the front, without connecting cable 2 additional LED work lights, at the rear, switched via reversing light Floor Screen-printed panels approx. 30 mm thick, on longitudinal beams for high point load capacity for forklift axle load up to max. 7100 kg Front wall Plug-in slats 5 Rows of aluminum V-slats 2 pairs of Vario steel slats, in conjunction with Vario beams for securing loads at the front and rear, then no need for slats in the area of the steel slats Rear portal doors, 2-winged, each with 2 internal espagnolette locks Cgeb Epsri Hihe D Dhjt Tarpaulin, with welded-in horizontal and vertical straps Empty weight: 5,960kg Offer and images subject to change

Condition: used, overall weight: 35,000 kg, maximum load weight: 27,290 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,853 mm, first registration: 05/2020, Equipment: ABS, SDS390 101m³ X-TRA Long moving floor lift axle SAF* Deutscher Anhänger / German Semitrailer * 101m³ X-TRA Long model * SAF axles * Lift axle * Disc brakes / Discbrakes * Floor Sliding floor with rear wear plate made of V2A sheet metal, aluminum floor boards, 8 mm floor profile, ribbed design, aluminum end caps* Tires: 385/55 R 22.5 1st axle 9/9 mm, 2nd axle 12/10 mm, 3rd axle 11/9 mm * Empty weight: 7,710 kg * Permissible total weight: 35,000 kg * Payload / Working load: 27,290 kg * Air suspension * All data without guarantee * Further information and criteria on request. Coborwvl Tj Ep D Dhsgt * Additional service Leistungen / Additional service * Umlackierungen, Nachrüstungen möglich / repainting, retrofitting possible * Kurzzeitkennzeichen / Zollkennzeichen / License plate * Überführung und Verschiffung möglich / Transfer and shipment possible * Hilfe bei Zoll und Export Dokumenten / Help with customs and export documents * Besorgung von COC und EUR Dokumenten / Procurement of COC and EUR documents * Seit 1991 auf dem Markt / Since 1991 on the market * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimum financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop / own workshop * Mówimy po polsku. * We speak english. * Goworim po russki * The repainting in your desired color is possible in our company at a reasonable price and in good quality. The repainting in your desired color is possible in our house at a reasonable price and in good quality. * Are you further away and have no opportunity or time to inspect and test a truck at our premises? No problem, you are welcome to appoint an independent expert of your choice to inspect the truck technically and visually. If, contrary to expectations, a defect should occur, we can rectify the defect quickly and effectively in our workshop. We can also deliver your new used truck anywhere in Europe for an additional charge. You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: new, overall weight: 30,000 kg, maximum load weight: 23,780 kg, axle configuration: 3 axles, loading space length: 8,840 mm, loading space height: 860 mm, total width: 2,550 mm, NEW VEHICLE from stock HANGLER Fahrzeugbau Austria 3 axle low loader trailer with ramps Air suspension Ceb Ep Derm Hihs Dhjgt Total weight 24,000 kg / 30,000 kg Payload 17,780 kg / 23,700 kg Empty weight 6,300 kg Total length 10,800 mm Crank length (axle plateau at the front) 2,040 mm Loading bed including slope 6,800 mm Loading height 860 mm Frame arc spray galvanized and finished in RAL 3002 Fine grain steel welded construction SAF drum brake axles with air suspension with lifting and lowering valve Tires 235 / 75 R 17.5" made by Continental Large lashing package with folding lashing eyes and stake pockets Extensions to 3,000 mm with warning package and Rotating beacon Driveway ramps approx. 3,000 mm long, 650 mm wide with spring lift Vehicle price plus EUR 1,280.00 pre-freight / provision Rent-to-own offer: term 48 months, residual value 40%, down payment only VAT Monthly rate: EUR 613.00 Other 3, 4 and 5 axle low loaders new and used immediately available

Condition: used, overall weight: 35,000 kg, maximum load weight: 28,933 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,490 mm, loading space height: 3,000 mm, loading space volume: 101 m³, first registration: 08/2015, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, * Edscha sliding roof * Haldex EBS, ABS, LSV * Lift axle * Toolbox * BPW Eco Plus axles with disc brakes ----* Tire dimensions: 385/55R19.5 * Overall length: 13850 mm * Tare weight: 6067 kg * TÜv & SP: expired -----Errors & prior sale reserved Cobsvhvcfs Ep D Dhogt Vehicle number 5726

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2013, Equipment: ABS, Fliegl walking floor * EZ 22.05.2013 * 3 axles * 92 cubic meters * 1st axle lift axle * 1 vehicle owner / 1 owner Cgeb Ep Djqk Tf Te Dhet * German trailer / German walking floor * Empty weight: 7,525 kg * Permissible total weight: 35,000 kg * SDS 350 * Tires: * 1st axle 385/55 R 22.5 v.l. 5 mm & v.r. 8 mm * 2nd axle 385/55 R 22.5 v.m.l. 10 mm & v.m.r. 9 mm * 3rd axle 385/55 R 22.5 h.l. 5 mm & h.r. 8 mm * All information without guarantee * The HU/SP will be renewed before the sale / We renew HU/SP ("TÜV") before Sale * Further information and criteria on additional services * Repainting, retrofitting possible * Short-term license plate / Customs license plate * Transfer and shipment possible * Help with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible * Own workshop * Mówimy po polsku. * We speak English. * Goworim po russki * The repainting in your desired color is possible in our house at a reasonable price and in good quality. * You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: new, overall weight: 30,000 kg, maximum load weight: 23,890 kg, axle configuration: 3 axles, Vehicle from ongoing production NEW VEHICLE Fliegl 3 axle low loader type DTS 300, hot-dip galvanized Total weight 24,000 kg / 30,000 kg Payload 17,890 kg / 23,890 kg Empty weight 6,080 kg Total length 10,900 mm Loading length 8,680 mm Loading bed 6,500 mm including 900 mm approach slope Loading height 860 mm Air suspension with lifting and lowering valve Long ramps 2,800 mm with hydraulic actuation Wider extensions to 3,000 mm with warning signs and rotating beacon Large lashing package with 5.0 and 10.0 ton lashing points 5 pairs of stake pockets Towing eye 40 mm Cgebjk N Adkj Ep D Dhot Plus pre-freight / provision from Storage space Wiesmoor 1,280.00 ¤/ net Rent-purchase offer: term 48 months, residual value 40%, down payment only VAT monthly rate: EUR 609.00

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2015, Equipment: ABS, Fliegl walking floor * EZ 06.03.2015 * 3-axles Ceb Epjrvu Snj D Dhogt * 92 cubic meters * 1st axle lift axle * SDS 390 * Empty weight: 7,200 kg * Tires: * 1st axle 385/55 R 22.5 v.l. 8 mm & v.r. 11 mm * 2nd axle 385/55 R 22.5 v.m.l. 10 mm & v.m.r. 11 mm * 3rd axle 385/55 R 22.5 h.l. 10 mm & h.r. 9 mm * German trailer / German semitrailer * 1 vehicle owner / 1 owner * All information without guarantee * Further information and criteria on additional services / Additional service * Repainting, retrofitting possible / repainting possible * Short-term license plate / customs license plate * Transfer and shipment possible * Help with customs and export documents * Procurement of COC and EUR documents * On the market since 1991 * Leasing and financing possible. We have been working with various leasing companies for many years and can therefore find the optimal financing for every customer. We can also often support customers with poor credit ratings and put them in touch with good leasing partners. * Own workshop * Mówimy po polsku. * We speak English. * Goworim po russki * The repainting in your desired color is possible in our house at a reasonable price and in good quality. * You are further away and have no possibility or time to visit and check a truck with us? No problem, you are welcome to order an independent expert of your confidence and have the truck checked technically and visually. If, contrary to expectations, a deficiency should occur, we can fix it quickly and effectively in our workshop. Furthermore, we can deliver your new used cars for a surcharge Europe-wide.

Condition: new, overall weight: 24,000 kg, maximum load weight: 17,800 kg, axle configuration: 3 axles, loading space length: 8,670 mm, loading space width: 2,520 mm, loading space height: 860 mm, total width: 2,550 mm, Total weight: 24,000kg/ 30,000kg Empty weight: 6,200kg Payload: 17,800kg/ 23,800kg Total length: 10,890mm Loading length: 8,670mm total, 2,520mm offset, 6,500mm loading bed Width: 2,520mm Loading height: 860mm Further information - Frame hot-dip galvanized including passivation - Rear support foldable - Large lashing package - Plastic storage box - Parabolic suspension Cgsb Ep D Detrizcohjt - Wooden floor 70 mm - Long ramps 2,800 mm x 750 mm, can be moved sideways - Hydraulic operation - Warning signs for 3,000 mm widening - Rotating beacon, removable Plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 €/ net

Condition: new, overall weight: 21,000 kg, maximum load weight: 15,080 kg, axle configuration: 1 axle, NEW VEHICLE Fliegl 1 axle special low loader Cgob Ep D Dollwitshet Total weight 21,000 kg Payload 15,080 kg Empty weight 5,920 kg Total length 13,630 mm Loading length 9,940 mm Low bed from the wheel area tapering to 210 mm loading height Hanging bar for aluminum ramps at the rear of the vehicle across the entire width Towing eye at the rear Electric cable winch pulling force 8,165 kg with radio remote control, cable length 35 meters 1 pair of wheel recesses approx. 700 mm after the gooseneck in the floor 2 pairs of wheel stops pluggable, 4 pairs of plug-in positions Large lashing package Axle BPW drum brake Air suspension with lifting and lowering valve Lighting completely in LED 1 pair of aluminum ramps load capacity 12,000 kg, storage compartment in the middle of the loading area Frame hot-dip galvanized, outer frame painted red plus pre-freight / provision from the Wiesmoor storage location 1,280.00 ¤/ net New vehicle without first registration with full manufacturer's warranty Vehicle is available immediately Rent-to-own offer: term 48 months, residual value 40%, down payment only VAT monthly rate EUR 899.00 (other terms are possible)

Condition: new, overall weight: 35,000 kg, maximum load weight: 25,050 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,500 mm, loading space height: 950 mm, total width: 2,550 mm, Total weight: 35,000kg/ 48,000kg Empty weight: 9,950kg Payload: 25,050kg/ 38,050kg Total length: 21.00mm Loading length: loading area i.L. approx. 13,500mm/ loading length max. 21,000mm Width: 2,550mm Loading height: 950mm Further information plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 ¤ Rear support, telescopic 4 wheel chocks with holder 4 pairs of container locks recessed in the floor for 1x 40 ft. container or 2x 20 ft. container 1 spare wheel holder for 1 electric bike, with wheel fastening kit, in basket design 11 pairs of stake pockets embedded in the outer frame, suitable for FR insert stakes 80x50 mm, flush installed in the outer frame, with opening for tensioning belt or chain attachment 20 pieces of insert stakes W=80/ D=50/ L=1500 mm 1 plastic tool box 3 pairs of lashing eyes with 3.5 tons each, built into the side frame - in the neck area 13 pairs of folding lashing rings each 10,000 daN suspended freely pivoting in the side frame profile (also suitable for extra-wide lashing). 1 pair of folding lashing rings, each 10,000 daN, installed on the side in the intermediate support Air suspension with lifting and lowering 1st axle automatic lifting axle, additionally with forced lowering including starting aid with control button on the semi-trailer, without cab operation with lifting & lowering valve + auto-reset function Wheels and tires 235 / 75 R 17.5" Steel rims in twin arrangement, factory silver 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red lane keeping lights at the rear in LED 2 x 7-pin and 1 x 15-pin, non-interchangeable sockets at the front, without connecting cable 2 additional LED work lights, at the rear, switched via reversing light 1 rotating beacon, removable, on the underrun protection 1 x 7-pin sockets at the rear 6 side sockets, 2x front plate, 2x support feet, 2x Rear end (left + right) 7-pin 2 work lights, recessed into the front wall at the top, including switch 2 pairs of extra-wide panels, each with 2 LED marker lights per panel, extendable to 3,500 mm at the side, panels can also be attached to the loading area (width can be adjusted continuously) Fixed steel front wall 1,200 mm high, with stable steel corner pillars without beveled corners, straight loading on the side. 2 lashing holes at the top inside and outside in the front wall corners Front frame hot-dip galvanized + outer frame visible area finally painted in RAL 3002 carmine red Rear frame hot-dip galvanized + outer frame visible area finally painted in RAL 3002 carmine red Front wall RAL 3002 carmine red Csb Esumha Nsp D Dhegt

Condition: new, overall weight: 35,000 kg, maximum load weight: 26,100 kg, axle configuration: 3 axles, loading space length: 9,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total width: 2,550 mm, Vehicle / Body: Low loader semitrailer First registration: New vehicle Gesamtgewicht: 35.000kg/47.000kg Unladen weight: 8,900kg Payload: 26,100kg/38,100kg Overall length: 13,300mm Loading length: 9,200mm Width: 2,520mm Loading height: 900mm Further information Chassis low loader semi-trailer Welded steel construction, fifth wheel plate with interchangeable 2" kingpin and 2 kingpin positions (not in conjunction with forced steering) 24 t. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation Folding rear support 2 wheel chocks with holder Aluminum side collision protection Rear spray flaps across the entire width Spray flaps in front of 1st axle and rear of each axle with anti-spray, according to EC 1 plastic tool box, w=600 / h=425 / d=460 mm, lockable Widenings extendable to 3,000 mm (not in rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks on gooseneck, front transverse Wooden planks 70 mm for widening to 3,000 mm Cgeb Epjut Idno D Dhjt Excavator trough above the rear axles starting to the rear, approx. 3,000 mm long, approx. 650 mm wide and approx. 230 mm deep, 2 pairs of lashing holes, 5 tons each, in the excavator trough on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear slope Low loader lashing eyes 11 pairs of lashing mushrooms at the top and sides of the outer frame, 10 tons each 2 x on gooseneck 9 x distributed in the flatbed 2 pairs of lashing eyes at the front on the gooseneck, 5 tons each 3 pairs of swivel lashing eyes on the gooseneck, 5 tons each 2 pairs of additional hinged lashing eyes recessed into the flatbed, 10 tons each 1 x at the start of the low loading area 1 x at the end of the rear slope 1 pair preparation on incline of gooseneck for 6.7 to. screw lashing eye (JDT) 8 pairs of ring lashing eyes embedded in the outer frame, 5 tons each (can be converted to stake pockets) 1 pair of screw lashing eyes, 6.7 tons each (JDT), with large flange plate incl. thread as counterholder Axles + suspension SAF or BPW drum brake axles, manufacturer's choice "Axle/chassis laser-measured" Reduction of tire wear and fuel consumption Last axle self-steering, with automatic reverse lock via reversing light, and additional locking function on the vehicle via hand button. Air suspension Wheels and tires 235 / 75 R 17,5" at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Colored cable routing for easy servicing. Spring-applied parking brake 24 volt EBS, electronic brake system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS guaranteed! 2 swap-proof coupling heads at the front, without connecting cable with lifting & lowering valve Axle load detection via EBS-Canbus signal, for indication via display in the driver's cab, truck must be prepared accordingly truck must be prepared accordingly, no truck installation (no calibrated scales) Vehicle - driving stability system Tire pressure monitoring system according to ECE R 141, indication via display in towing vehicle, via EBS, without truck installed (prerequisite for this must be provided in the truck) Electrical system 24 volt, multi-chamber lights, amber LED lighting on the side Side amber LED ligh

Condition: new, overall weight: 40,000 kg, maximum load weight: 30,310 kg, axle configuration: > 3 axles, NEW VEHICLE Fliegl 4-axle low loader with 2 pairs of wheel recesses and ramps Total weight 40,000 kg Payload 30,310 kg Empty weight 9,690 kg Total length 12,000 mm Loading length 10,000 mm Loading bed 7,150 mm including 850 mm approach slope Loading height 900 mm 1st pair of wheel recesses after offset in the loading bed, bottom length approx. 1,600 mm, 400 mm deep 2nd pair of wheel recesses between the axles in the loading bed, bottom length 600 mm, 300 mm deep Extensions to 3,000 mm, warning signs, rotating beacon, large lashing package 5 pairs of stake pockets in the outer frame Excavator arm recess 1,800 mm long, 150 mm deep Drawbar 50 mm Air suspension with lifting and lowering valve, can be operated separately BPW drum brakes Tires 235 / 75 R 17.5" Axle load detection via EBS CAN bus signal, Trailer Info Center Cjb Ep D Djnzlg Dehegt Ramps 2,800 mm x 750 mm with hydraulic actuation Hydraulic side shift Rent-purchase offer: term 48 months, residual value 40%, down payment only VAT on the rental rates, monthly rate EUR 970.00 net Vehicle will be available from September 11th, 2023 from the Neumünster trade fair. Visit us at Nordbau - Stand West 121 right next to the main entrance. Other 3, 4 and 5 axle low loaders new and used available immediately

Condition: used, overall weight: 12,000 kg, maximum load weight: 9,700 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 1,740 mm, loading space height: 900 mm, first registration: 11/1999, next inspection (TÜV): 04/2024, total width: 2,450 mm, total height: 900 mm, Unladen weight: 2,300kg Overall length: 5,500mm Loading length: 4,000mm Width: 2,450mm Further information - Loading width 1,740mm - Wabco compressed air tank - Large lashing package - Front support Cjb Ep Deqwdi Re Dhegt - Drop sides 40mm

Condition: new, overall weight: 18,000 kg, maximum load weight: 13,200 kg, axle configuration: 2 axles, loading space length: 7,500 mm, loading space width: 2,520 mm, loading space height: 860 mm, total width: 2,550 mm, Total weight: 18,000kg/ 21,000kg Empty weight: 4,800kg Payload: 13,200kg/ 16,200kg Total length: 9,450mm Loading length: 7,500mm including rear bevel Width: 2,520mm Loading height: 860mm Further information - Frame painted in stock color Nova gray - Wooden floor 70 mm - Steel ramps 2,800mm long x 750mm wide, can be moved sideways - With spring jack support - Folding rear support - Aluminum side impact protection - Plastic tool box - Widening package 3m - Large lashing package - 5 pairs of ring lashing eyes embedded in the outer frame (can be converted to stake pockets), 5 tons each, 7 pairs of lashing mushrooms embedded at the top and side of the outer frame, each 10 ton. - 50mm towing eye - Air suspension - Raise & lower valve - Axle load detection via EBS-Canbus signal - Tires 235/75R17.5 - 2 x 7-pin connector at the front Cgjb Ejr Da Uvop D Dhjt - LED rotating beacon - 2 pairs of warning signs with double LED lighting, extendable 3m plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 €/ net

Condition: new, overall weight: 41,000 kg, maximum load weight: 32,100 kg, axle configuration: 3 axles, NEW VEHICLE Fliegl 3 axle semi-trailer with ramps type SDS 470 T Total weight 41,000 kg / 47,000 kg Empty weight 8,900 kg Payload 32,100 kg / 38,100 kg Total length 13,300 mm Loading bed 9,200 mm Cob Epsk N Aflo D Dhsgt Ramps 2,800 mm x 750 mm with spring lift Air suspension Excavator arm recess Large lashing package Wooden floor 70 mm SAF axles, axle 3 as trailing steering axle Plus pre-freight / provision from the Wiesmoor storage location 1,280.00 €/net Vehicle is available immediately from the storage location. Hire purchase offer: term 48 months, 40% residual value, down payment only VAT. monthly rate EUR 999.00 (payable net only)

Condition: new, overall weight: 24,000 kg, maximum load weight: 17,900 kg, axle configuration: 3 axles, loading space length: 8,670 mm, loading space width: 2,500 mm, loading space height: 860 mm, total width: 2,520 mm, From ongoing production Total weight: 24,000kg/ 30,000kg Empty weight: 6,100kg Payload: 17,900kg/ 23,900kg Total length: 10,890mm Loading length: 8,670mm total, 2,520mm offset, 6,500mm loading bed Width: 2,520mm Cgsb Epjuytx So D Dhet Loading height: 860mm Further information Steel welded construction Turntable with strong ball bearing ring Foldable rear support Wheel chocks with holder Aluminum side impact protection Rear mud flaps across the entire width (not in conjunction with forklift bracket) Half-shell mudguard 1st axle with anti-spray mud flaps Anti-spray mud flaps behind 2nd and 3rd axles Plastic tool box Extendable extensions to 3,000mm Storage compartment for wooden planks in the middle of the loading area Wooden planks 70 mm for widening to 3,000 mm Lashing eyes for low loader 1 pair of lashing cutouts in the longitudinal beam at the front on the offset, 10 tons each. 4 pairs of lashing holes in the outer frame of the crank, each with 5 tons (tension belt attachment) 7 pairs of lashing mushrooms embedded in the outer frame at the top and side, each with 10 tons 1 x at the front on the crank, 6 x in the low bed Pair of ring lashing eyes embedded in the outer frame, each with 5 tons (can be converted to stake pockets) Pair of additional folding lashing eyes, each with 10 tons 1 x on the crank 1 x embedded in the floor behind the last axle Trailer towing device, turntable Draw fork with tested 40 mm drawbar eye Draw fork height adjustment via spring Axles + suspension Drum brake axles, at the manufacturer's discretion "Axles/chassis laser-measured" Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17.5" at the manufacturer's choice steel rims in twin arrangement, factory silver brake system 2-line compressed air brake system spring-loaded parking brake 2 interchangeable coupling heads at the front, with connecting lines to the motor vehicle, 24 volt ABS and ALB, with ABS plug at the front, with connecting cable electrics 24 volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red lane keeping lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, LED rotating beacon with holder, switched via parking light (light removable) pair of warning signs with double LED lighting and extendable to 3,000mm floor front bend with steel/checker plate covering storage box embedded in the crossing slope to the bend then with approx. 70mm softwood floor, in the wheel arch area steel/checker plate covering rear bevel with 70mm softwood floor Low loading area including rear bevel 6,500mm Loading ramps Steel ramps 2,800mm long, 750mm wide, can be moved sideways Additional ramp lock foldable at the bottom (to prevent the ramps from slipping sideways, not in conjunction with lateral hydraulic ramp shifting) Covered with wood (tip area with steel/checker plate) Hydraulic via tractor auxiliary drive with throttle, actuation on the side in FR left Hydraulic connection with SVK plug NW 10/3, including connecting hose Paintwork Frame hot-dip galvanized including passivation Loading ramps hot-dip galvanized Plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 €/ net

Condition: new, overall weight: 30,000 kg, maximum load weight: 24,600 kg, axle configuration: 3 axles, NEW VEHICLE from ongoing production Fliegl 3 axles AGRAR low loader type DTL - 300 Approval for max. 60 km/h, towing vehicle LoF Chassis hot-dip galvanized with passivation Total weight 24,000 kg / 30,000 kg Payload 18,600 kg / 24,600 kg Empty weight 5,400 kg Total length 10,300 mm Loading length 8,200 mm / 5,900 mm Loading height 860 mm Large lashing package Long ramps with spring jack Parabolic suspensionTowing eye 40 mm LED rotating beacon Folding supports at the rear Plus pre-freight / provision from the Wiesmoor storage location 1,280.00 ¤/ net Cgsb Ep D Dollwhcjhot Rental purchase offer: term 48 months, residual value 40%, Deposit only VAT monthly rate: EUR 459.00 other vehicles under

Condition: new, overall weight: 40,000 kg, maximum load weight: 30,010 kg, axle configuration: > 3 axles, loading space length: 10,000 mm, loading space width: 2,520 mm, loading space height: 900 mm, total width: 2,550 mm, New vehicle Fliegl 4 axle low loader trailer with wheel recesses and split ramps, type VTS 400 RM Rental purchase offer: term 48 months, down payment only VAT, residual value 40% monthly rate EUR 899.00 Vehicle number: - 183 Cgebjtrizks Ep D Dhjt Vehicle / body: low loader First registration: new vehicle Total weight: 24,000kg/40,000kg Empty weight: 9,990kg Payload: 14,010kg/30,010kg Total length: 12,000mm Loading length: total approx. 10,0000mm, offset approx. 2,850mm, loading bed including rear bevel approx. 7,150mm Width: 2,550mm Loading height: 900mm Further information Low load chassis Trailer Steel welded construction Turntable with strong ball bearing ring Foldable rear support Wheel chocks with holder Aluminum side impact protection Rear splash flaps across entire width Half-shell mudguards 1st + 2nd axle with anti-spray splash flaps behind each axle, anti-spray splash flaps behind 4th axle Excavator arm recess over the rear axles starting at the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes, each 5 tons. in the excavator arm recess on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear bevel Spare wheel holder for 1 electric bike, standing on the offset in the middle at the very front Spare wheel, same make as the basic tires, steel rim Storage box on the offset in the floor with lid, W=720 mm / L=520 mm / D= 170 mm 1. Pair of wheel recesses recessed after the offset in the low bed in the driving lane area, beveled towards the entrance, bottom length approx. 1600 mm, approx. 400 mm deep. Note! Frame in the main support area 400 mm higher than the wheel recess. 2. Pair of wheel recesses recessed between the axles in the low bed in the driving lane area, beveled towards the entrance, bottom length approx. 600, approx. 300 mm deep. Note! Frame in the main support area 300 mm higher than the wheel recess. Extendable extensions to 3,000 mm (extension not in the rear bevel and not in the wheel wells below) (track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks beneath the low-loading area Wooden planks 70 mm for extension to 3,000 mm Lashing eyes for low-loader 1 pair of ring lashing eyes set into the front on the offset, 5 tonnes each 4 pairs of lashing holes in the outer frame, each with 5 tonnes (tension belt attachment) 8 pairs of lashing mushrooms set into the outer frame at the top and sides, 10 tonnes each 2 x at the front on the offset 6 x in the low bed First lashing eye 250 mm from the front and last max. 250 mm from the rear, distance between the lashing eyes no greater than 1,100 mm 5 pairs of stake pockets set into the outer frame, inside 70 x 40 mm, (can be converted to 5 ton ring lashing eyes, not included in delivery) 1 pair of additional folding lashing eyes embedded in the floor, 10 ton each 1 x inside next to the main frame at the start of the low bed 2 pairs of additional folding lashing eyes, 10 ton each 1 x on the offset (protrudes) 1 x embedded in the floor behind the last axle Towbar trailer towing device Towing fork with tested 50 mm towing eye, towing eye inclined at 8° D value at least 160 kN Axles + suspension BPW drum brake axles "Laser-measured axle/chassis" Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation at the fron

Condition: new, overall weight: 24,000 kg, maximum load weight: 17,800 kg, axle configuration: 3 axles, loading space length: 8,670 mm, loading space width: 2,500 mm, loading space height: 860 mm, total width: 2,520 mm, Vehicle number: - 537 Vehicle / Body: Low loader First registration: New vehicle Total weight: 24,000kg/ 30,000kg Unladen weight: 6,200kg Payload: 17,800kg/ 23,800kg Overall length: 10,890mm Loading length: 8,670mm overall, 2,170mm offset, 6,500mm load bed Width: 2,520mm Loading height: 860mm Further information Welded steel construction Turntable with strong ball bearing slewing ring Folding rear support Wheel chocks with holder Aluminum side bumpers Rear spray flaps across the entire width Half-shell mudguard 1st axle with anti-spray flaps Anti-spray flaps behind 2nd and 3rd axle 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Widenings extendable to 3,000 mm (not in rear slope) (However, the track width of the construction machinery or vehicles to be transported must not exceed the outer frame width 2,550 mm) Storage compartment for wooden planks in the middle of the cargo bed Wooden planks 70 mm for widening to 3000 mm Low loader lashing eyes 1 pair of lashing cut-outs in the front side member on offset, 10 tons each 5 pairs of lashing holes in the outer frame of the offset, 5 tons each (lashing strap attachment) 7 pairs of lashing mushrooms at the top and sides of the outer frame, 10 tons each 1 x at the front on the offset 6 x in the low bed 5 pairs of stake pockets embedded in the outer frame, inside 70 x 40 mm, (convertible to 5 to. ring lashing eyes, not Cob Ep Dsvd Ax Ss Dhsgt not included in the scope of delivery) 2 additional pairs of hinged lashing eyes, 10 tons each 1 x on offset (protrudes) 1 x embedded in the floor behind the last axle Trailer drawbar Turntable Drawbar with tested 40 mm towing eye Axles + suspension Drum brake axles, at the manufacturer's choice "Axle/chassis laser-measured" Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17,5" at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-applied parking brake 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco or Knorr Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS guaranteed! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (removable light) 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor Front offset with steel/ checker plate covering Storage box recessed into the drive-over slope to the offset Then with 70 mm softwood floor, steel/ checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Deep loading area incl. rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Additional ramp safety device hinged at the bottom Covered with wood (top area with steel/checker plate) with spring lift support Paintwork Hot-dip galvanized frame incl. passivation Drive-on ramps Hot-dip galvanized plus pre-freight / provision ex storage location 26639 Wiesmoor ¤ 1,280.00/ net

Condition: new, overall weight: 40,000 kg, maximum load weight: 31,100 kg, axle configuration: > 3 axles, loading space length: 10,410 mm, loading space width: 2,500 mm, loading space height: 900 mm, total width: 2,520 mm, Total weight: 24,000kg/40,000kg Empty weight: 8,900kg Payload: 15,100kg/31,100kg Total length: 11,940mm Loading length: 10,410mm total, 2,490mm offset, 7,920mm loading bed including rear bevel Width: 2,520mm Loading height: 900mm Further information plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 €/net Steel welded construction Turntable with strong ball bearing ring Foldable rear support Wheel chocks with holder Aluminum side impact protection Rear splash guards across the entire width (not in conjunction with forklift bracket) Half-shell mudguards 1st + 2nd axle with anti-spray splash guards behind each axle, Anti-spray flaps in front of and behind the 3rd and 4th axle Excavator arm recess above the rear axles starting to the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes each 5 tons. in the excavator arm recess on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear bevel 1 plastic tool box, w=600 / h=425 / d=460 mm, lockable 1 storage box embedded in the floor on a crank with lid, W=720 mm/ L=520 mm / D= 170 mm Extensions extendable to 3,000 mm (not in the rear bevel) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width 2,550 mm) Storage compartment for wooden planks below the low-loading area Wooden planks 70 mm for widening to 3,000 mm Lashing eyes for low-loader 1 pair of lashing cutouts in the longitudinal beam at the front on a crank, 10 tons each. 4 pairs of lashing holes in the outer frame, each with 5 tons (tension belt attachment) 9 pairs of lashing mushrooms, embedded in the outer frame at the top and sides, each with 10 tons 2 x at the front on the bend 7 x in the low bed First lashing eye 250 mm from the front and last max. 250 mm from the back, distance between the lashing eyes not greater than 1100 mm 3 additional pairs of folding lashing eyes, each with 10 tons 1 x on the bend (sticks out) 1 x at the beginning of the low bed, embedded inside on the longitudinal beams 1 x embedded in the floor behind the last axle Towbar with tested 50 mm towing eye Cgsb Epevyphls D Dhot Towbar height adjustment via spring Axles + suspension Drum brake axles, as selected by the manufacturer "Laser-measured axle/chassis" Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free Steel-rubber bearings and mechanical axle load compensation at the front and rear (rocker compensation) Wheels and tires 235 / 75 R 17.5" at the manufacturer's discretion Steel rims in twin arrangement, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 interchangeable coupling heads at the front, with connecting lines to the towing vehicle, 24 volt ABS and ALB, with ABS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrics 12-24 volts, multi-chamber LED lights, yellow LED lighting on the side, license plate lighting in LED, (Note! Incorrect diagnoses can occur with certain towing vehicles, although the function is present) 2 white position lights at the front in LED 2 white/red lane keeping lights at the rear in LED 2 x 7-pin, interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (light removable) 2 pairs of warning signs with double LED lighting and extendable