Used Fliegl Forage Wagons / Loader Wagons for sale (188)

Condition: like new (used), functionality: fully functional, overall weight: 35,000 kg, empty load weight: 7,452 kg, maximum load weight: 27,548 kg, axle configuration: 3 axles, loading space length: 13,460 mm, loading space width: 2,470 mm, first registration: 05/2023, suspension: air, machine/vehicle number: WFDFLT33902030059, The pictures are archive pictures, the vehicle may still be in use! Kjdewk Dc Ropfx Abljnc Equipment on request!

Condition: used, overall weight: 38,000 kg, maximum load weight: 32,900 kg, axle configuration: 3 axles, first registration: 08/2018, total width: 2,550 mm, Equipment: ABS, Fliegl Container Semi-Trailer Container Chassis SDS 380 Rigid 40" ----Container mounts: 1x 20 foot centrally without steel/chequer plate covering in the rear area, 2x 20 foot or 1x 40 foot with gooseneck tunnel ---- Permissible total weight: 38,000 kg, Unladen weight: 5,100 kg, Payload: 32,900 kg, Distances TwistLock fasteners from rear to front: 2,700 / 5,850 / (TWIST-LOCK MISSING 6,130) / 8,550 / 8,920 / 12,000 mm, SAF axles, Lift axle 1st axle, Air suspension, Disc brakes, 1x work light at rear, Underrun protection right, left, and rear, 2x crank supports, EBS, ABS, Haldex braking system, Wheelbase: approx. 6,500 + 1,410 + 1,310 mm, Kjdpfewnu Npox Abljnc External dimensions LxW: approx. 12,520 x 2,550 mm, Saddle height: approx. 1,120 mm, Loading height lowered: approx. 1,146 mm, Neck height of frame: approx. 130 mm, Tyres: 385/55R22.5, Tread depth tyres left front: 11 mm, Tread depth tyres left middle: 10 mm, Tread depth tyres left rear: 11 mm, Tread depth tyres right front: 9 mm, Tread depth tyres right middle: 11 mm, Tread depth tyres right rear: 8 mm, Folding TWIST-LOCK mount at position 6,130 mm missing, Locking the 20-foot container at the front is not possible as both TWIST-LOCKs are missing!! Further equipment: Fine-grained steel welded structure, Fifth wheel plate with replaceable 2" kingpin and 2 kingpin positions, Mud cover between the longitudinal members front to mid of chassis, not drivable, Container mounts: 1x 20 foot centrally without steel/chequer plate covering at rear, 2x 20 foot or 1x 40 foot with gooseneck tunnel, no height adjustment at the rear and no folding middle supports, transport of containers without tunnel not possible, 24 ton 2-speed landing gear, single side operation, with semi-circular lower part and straight connection plate, with push compensation, Side underrun protection aluminium, Underrun protection steel galvanized, Half-shell mudguards, Rear impact protection, SAF disc brake axles with 430 mm disc diameter, Axle spacing offset 1,410/1,310mm (Combined Transport) up to 44t total train weight, Air suspension, 1st axle automatic lift axle, including forced lowering and start-up aid, operation 3x brakes (start-up aid is functional up to an axle load overrun of 30% and up to a speed of max. 25 km/h.), 2-line compressed air brake system, Spring-loaded parking brake, 2 tamper-proof coupling heads at front, EBS, with lift & lower valve, Vehicle driving stability system, Axle load detection via EBS-Canbus signal, for display on driver’s cab screen, truck must be prepared accordingly, Steel rims, 24V multi-chamber lights, side yellow LED lighting, 2x white position lights at front, 2x white/red lane marker lights at rear, 2x 15-pin sockets at front, Frame paint: DB 7350 Novagrau,

Condition: new, axle configuration: 3 axles, color: grey-black, gearing type: mechanical, Colour natural, lifting axle, electronic braking system EBS, connection plug 1x15-pin, equipment outer frame slightly slanted, new version with "Load-Lock profile" for attaching tensioning belts, 13 pairs of lashing eyes additionally in the outer frame, each 5 to 24 tonnes. 2-speed support winch, one-sided operation, with semi-circular lower section and straight forklift ram protection made of steel on the outer frame on the side. and rear 1 spare wheel holder for 1 electric bike, with wheel fastening kit 1 plastic tool box 650mmx520mmx670mm 7 pairs of stake pockets embedded in the outer frame, 83 x 83 mm SAF disc brake axles with 430 mm air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes Wheels and tires 6 385/65 R22.5" Make 6 steel rims, factory silver Floor screen-printed panels approx. 30 mm thick, cross joints with omega insert, for high point load capacity for forklift axle load up to max. 7 100 kg Front wall / corner stanchions front 25 mm aluminum hollow profile, 1 950 mm high, corner stanchions steel in volume design + 2 center supports "crash blocker", bottom inside at approx. 140 mm height Side walls 25 mm aluminum hollow profile, 700 mm high Paintwork frame hot-dip galvanized including passivation "15 year guarantee against rust through" side walls ALU anodized, errors and changes reserved. Knsdpfx Aotcwmieblsc

Condition: used, overall weight: 33,000 kg, maximum load weight: 28,040 kg, axle configuration: 2 axles, loading space volume: 25 m³, first registration: 07/2004, Year of construction: 2004, Equipment: ABS, Fliegl ZHKA 350 2 axles, lift axle, 25m3 aluminum trough, steel chassis Condition: good, ready for use Kodpfx Abowrvt Dslonc Tires: 40-85%

Condition: used, functionality: fully functional, overall weight: 35,000 kg, empty load weight: 6,100 kg, maximum load weight: 28,900 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, first registration: 04/2022, suspension: air, tire size: 435/50 R19,5", machine/vehicle number: WFDFLT33902029968, The pictures are archive pictures, the vehicle may still be in use! Kodpowk Dckofx Ablenc Equipment on request!

Condition: used, overall weight: 35,000 kg, maximum load weight: 29,365 kg, axle configuration: 3 axles, loading space volume: 25 m³, first registration: 06/2004, Year of construction: 2004, Equipment: ABS, Fliegl DHK 350 3 axles, lift axle, 25m3 aluminum trough, steel chassis Condition: good, ready for use Ksdpfxewrvq Ne Ablsnc Tires: 50-95%

Condition: like new (used), functionality: fully functional, overall weight: 35,000 kg, empty load weight: 6,100 kg, maximum load weight: 28,900 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, first registration: 04/2023, suspension: air-lift, color: black, tire size: 435/50 R19,5", Year of construction: 2023, machine/vehicle number: WFDFLT33902029969, Equipment: ABS, The pictures are archive pictures, the vehicle may still be in use! Kedswi Ilyspfx Ablenc Equipment on request!

Condition: used, functionality: fully functional, overall weight: 35,000 kg, empty load weight: 6,537 kg, maximum load weight: 28,463 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, first registration: 10/2015, color: silver, tire size: 385/65 r22.5, Year of construction: 2015, machine/vehicle number: WFDFLT33902017848, Further information Lightweight, fine-grain welded construction, fifth wheel plate with replaceable two kingpins, slightly sloped outer frame with load-lock profile for attaching tensioning straps (Note: To attach the straps in conjunction with side walls, the side walls must be opened). 24-ton, two-speed landing gear, single-sided operation, with a straight base, without thrust compensation, side door stays, wheel chocks with holders, pallet box for 32 Euro pallets (long version), ground clearance approx. 300 mm. Note: Free support leg corner dimension or free rearward swing radius approx. 1930 mm, quarter-shell mudguards in front of and behind the axle assembly, with anti-spray flaps only on the last axle, impact protection at the rear, pallet stops on both sides approx. 20-25 mm high, bolted version, loading height reduced by approx. 20-25 mm Knjdpekyrmisfx Ablec BPW disc brake axles with 430 mm disc diameter, air suspension, 1st axle automatic lift axle, including forced lowering and traction assist, actuation of 3 brakes (with traction assist up to max. 25 km/h) Floor: approximately 30 mm thick plywood panels, cross joints with omega inserts, on longitudinal beams for high point load capacity for forklift axle loads up to max. 7100 kg Front bulkhead/corner pillars: 2480 mm high, steel corner pillars in volume design, release device for Side tarpaulin on the bulkhead, at a height of approximately 140 mm at the bottom inside, with steel bumper protection. Roof: Sliding roof, rear end lift, can be folded up, with the roof sliding from the rear to the front, L-shaped roof rail for the automotive industry, interior width between the roof rails approximately 2,490 mm, tarpaulin color: white, lifting roof can be raised hydraulically by 400 mm using a hand pump on each corner post. Mobile with the lifting roof raised, adjustable upwards by 4 x 50 mm. Note the total height! Includes tarpaulin extension of 200 mm, only in conjunction with tarpaulin.

Condition: like new (used), functionality: fully functional, axle configuration: 2 axles, overall weight: 11,800 kg, empty load weight: 3,240 kg, maximum load weight: 8,560 kg, operation weight: 3,240 kg, loading space length: 5,000 mm, loading space width: 2,420 mm, first registration: 05/2022, tire size: 235/75 r17,5, color: green, machine/vehicle number: WFDFLT21201012268, Further information Welded steel construction, continuous tilting shaft at the rear with 80 mm ball tilting bearing, gear support foot at the front, folding rear support, wheel chocks with holder, steel underride guard, rear spray flaps across the entire width (not in conjunction with forklift bracket), quarter-shell mudguards, spare wheel, same make as basic tires, steel rim, loose, plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery)Note! Dropside touches storage box when folded down, lockable storage space for access ramps underneath the loading area, pair of aluminum ramps 3,000 mm long, 360 mm wide, load capacity per pair 8,000 kg, (suspension bar for ramps at the rear) Drawbar with tested 40 mm towing eye, height-adjustable drawbar via spindle, max. adjustment range 300 mm Kjdpfxek E Tdae Ablenc BPW drum brake axles, laser-measured axle/chassis Reduction in tire wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle load compensation (rocker compensation) 2-line compressed air brake systemColor-coded cable routing for easy servicing, hand spindle parking brake Integral air reservoir, ABS and ALB, with ABS plug at the front, with connecting cable, Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS, Duomatic connection at the front, with connecting cable to the motor vehicle 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure lights at the rear, 1 x 15-pin plug at the front, with connecting cable Three-way tipping mechanism, hydraulic multi-piston press with lift limiter and safety cable, low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck, hydraulic connection with SVK plug NW 10/3, incl. connecting hose, hydraulic actuation via truck power take-off Sturdy tipper body with 4 mm sheet steel floor, steel side wall structure, continuous side walls, hinged and pivoting with central locking at the bottom. Rear corner stanchions pluggable. Rear wall can be folded down and pivoted, with central locking at the bottom, platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Dropside retraction springs (not possible with split side walls), platform width 2420 mm, pair of lashing eyes in the floor, 5 tons each. Operating instructions: The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and castering behavior possible due to incorrect load distribution) Country of registration: Germany, with Dekra approval and expert opinion (according to §13 EG - FGV), 24/7 service hotline, prepared for single-line license plate holder, contour marking with reflective strips according to ECE R 048, white at the sides and red at the rear

Condition: like new (used), functionality: fully functional, overall weight: 35,000 kg, empty load weight: 5,800 kg, maximum load weight: 29,200 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, first registration: 12/2021, suspension: air-lift, color: silver, tire size: 385/65 R22.5", Year of construction: 2021, machine/vehicle number: WFDFLT33902029406, The images are archived; the vehicle may still be in use! Semi-trailer chassis for freight forwarding Fine-grain steel welded construction in lightweight design, fifth wheel plate with replaceable 2" kingpin, coil trough approx. 8,040 mm long, 6 coil supports (coil pockets inside 82 x 52 mm), coil cover with screen-printed panels and steel joists, 2 split-belt covers for coil trough, each approx. 293 mm wide, net weight approx. 13 kg per cover, slightly slanted outer frame with "Load-Lock profile" for tensioning straps. Note: To attach the straps in conjunction with the side walls, the side walls must be opened! 9 pairs of 5-ton lashing eyes recessed in the coil trough area, 24-ton 2-speed landing gear, single-side operation, with straight lower section, without thrust compensation. Note: Free support leg corner dimension or free rearward swing radius approx. 1,930 mm, without supports, extension ladder on the Rear, side door catches, 2 wheel chocks with brackets, aluminum side impact protection, bracket transverse to the side member and attached to the side member for supporting aluminum slats, aluminum underride protection, half-shell fenders with anti-spray flaps according to EC regulations, rear bumper, 1 plastic toolbox, 2 pairs of stake pockets recessed into the outer frame, approx. 72 x 42 mm internal dimensions, at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 19219, 2 stake pockets recessed centrally in the floor, approx. 72 x 42 mm internal dimensions at positions 1 and 2 according to the old Fliegl stake data sheet, as per AU 192198. Note: Stakes pockets/inserted stakes are not designed for the sole load securing of long materials, pipes, etc. without wrapping. Axles + Suspension SAF disc brake axles with 430 mm disc diameter, "Axle/Chassis" Laser-measured to reduce tire wear and fuel consumption, offset axle spacing 1410/1310 mm (combined transport) up to 44 tonnes gross vehicle weight, air suspension, without lift axle Knsdpowhp A Dofx Abloc These images are archive images; the vehicle may still be in use!

Condition: like new (used), functionality: fully functional, axle configuration: 2 axles, overall weight: 11,500 kg, empty load weight: 3,300 kg, maximum load weight: 8,200 kg, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75 r17,5, color: red, machine/vehicle number: WFDFLT21201011556, The images are archive images; the vehicle may still be in use! Further information Steel welded construction, continuous tilt shaft at the rear with 80 mm ball bearings Front transmission support leg, folding rear support, 2 wheel chocks with brackets, steel underride guard, full-width rear mud flaps, quarter-shell fenders, spare wheel, same make as base tire, steel rim, loose, 1 plastic toolbox with shelf, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Note! The side panel touches the storage compartment when folded down. ``` Lockable storage space for loading ramps beneath the loading area, 1 pair of aluminum ramps, 3,000 mm long, 360 mm wide, load capacity per pair: 8,000 kg (rear ramp attachment bar). Towbar with tested 40 mm towing eye, towbar height adjustable via spindle, max. adjustment range: 300 mm. BPW drum brake axles, laser-measured axle/chassis to reduce tire wear and fuel consumption. Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation). Kjdpolhpzvofx Abljnc Dual-line pneumatic brake system. Color-coded cable routing for easy servicing. Manual spindle parking brake, integral air reservoir, ABS and ALB, with ABS connector at the front, with connecting cable. Caution: The trailer may only be towed by towing vehicles that ensure the ABS is effective. 2 interchangeable coupling heads at the front, with connecting cables to the towing vehicle. 24-volt multi-chamber lights, yellow LED side lighting, 2 white position lights at the front. 2 white/red lane departure lights at the rear, 2 x 7-pin interchangeable connectors at the front, with connecting cable. Three-way tipping system, hydraulic multi-piston press with stroke limiter and safety cable. Low-pressure cylinder up to max. 170 bar, without throttle. If necessary, this can be retrofitted to the truck. Hydraulic connection with SVK connector NW 10/3, including connecting hose. Hydraulic operation via the truck's PTO. Sturdy tipping body with 4 mm sheet steel floor, steel side wall construction, continuous side walls, foldable and pivoting with central locking at the bottom. Rear corner stanchions are pluggable. The rear wall is foldable and pivots, with central locking at the bottom. Bedside length approx. 5,000 mm, side walls with 6 hinges at the bottom, bed width 2,420 mm 5 pairs of lashing eyes in the floor, each 5 tons Country of registration: Germany, with DEKRA approval and certificate (according to §13 EG - FGV), 24/7 service hotline, prepared for a single-line license plate holder, contour markings with reflective stripes according to ECE R 048, white on the sides and red on the rear

Condition: like new (used), functionality: fully functional, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, first registration: 08/2024, suspension: air, color: white, tire size: 385/65 R22,5", Year of construction: 2024, total length: 8,600 mm, total width: 2,550 mm, construction height: 3,240 mm, machine/vehicle number: WFDFLT33902032084, Please note that these images are archive images; the vehicle may still be in use! Alcoa Dura Bright aluminum rims Air suspension 1st axle: automatic lift axle, including forced lowering and traction control, actuated with "3x brakes" (traction control is functional up to an axle load exceeding 30% and up to a maximum speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" 10-year warranty against perforation corrosion Electrics 24-volt, multi-chamber lights, yellow LED side lighting 2 white position lights at the front 2 white/red lane departure lights at the rear 1 x 15-pin socket at the front, without connecting cable 2 additional LED work lights, integrated into the rear, controlled via the reversing light Hydraulics High-pressure cylinder max. 250 bar, lowest setting, hard-chromed, with HDK screw sleeve, fixed part, NW 48 mm. (without hose connection) will be removed from the vehicle being claimed. Hydraulic operation via truck auxiliary drive. Hydraulic connection with hose and HDK screw connector NW = 48 mm with knurled nut. Troughs Aluminum box body made of high-quality, abrasion-resistant material. 5 mm thick sloping bulkhead with external cylinder mount. Side walls made of 30 mm hollow-chamber profiles, neatly welded, with bulk material-repellent upper beam profile. Inside with access ramp on the bulkhead (not in combination with Cramaro). Shovel and brush holder on the outside on the bulkhead. Greenline - conical and aerodynamic body shape. "Membrane" rear wall. Knodpfowhfiyox Ablsc Rear wall as a swing flap with "double-joint hinge", externally mounted with double hook lock. Rear wall with rubber seal. Note: Heat-resistant up to max. 170°C! Floor 6 mm thick throughout Standing platform with access, connecting plate for air/electrical connections, and brakes with generous clearance for optimal operation. Roll-up tarpaulin on one side for storage in the right-hand drive position, with central locking in the left-hand drive position

Condition: ready for operation (used), functionality: fully functional, overall weight: 35,000 kg, empty load weight: 7,280 kg, axle configuration: 3 axles, first registration: 01/2019, suspension: air, color: grey, tire size: 385/65 R22,5", Year of construction: 2019, total length: 13,860 mm, total width: 2,550 mm, machine/vehicle number: WGJ133354KM800641, Vehicle is being offered on behalf of a third party. Please note: The images are archive images; the vehicle may still be in use! Equipment: Triple control block with control panel (3 x double-acting valves NG 10, 24 V, continuous current on pin 9 with a 15-pin connector), pressure line NW 16, return line NW 20 with screw coupling, without truck installation (hydraulic system on trucks with HDK screw couplings size 6, supply and unpressurized return required) Mechanical support leg Dual-circuit pneumatic braking system, 3 braked axles, rear axle steered, automatically lockable, drum brake axles, 1st axle with automatic lifting axle Steel rims, tires 385/65 R22.5" 100 km/h version with EBS module unit Haldex and COC papers Air suspension Body 11800 mm x 2380 mm (total length with 500 mm rear wall), side walls and rear wall 2300 mm high, hydraulic Large rear wall 500 mm Hydraulic TopLift light folding roof with net cover for load securing, hydraulically operated from the tractor, not available with raised side walls and foldable side walls (front wall raised not required), with safety valve Hydraulic sliding floor with all-round polyurethane strips, optimal sealing, hose routing 24 V lighting with 15-pin socket and connecting cable Knodov I Shqopfx Abljc Side marker lights right and left (yellow), rear clearance lights (white/red), front position lights (white) Contour markings according to ECE 104