Used Semitrailers With Work Platform for sale (100)

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2012, total length: 13,860 mm, total width: 2,550 mm, total height: 3,885 mm, Equipment: ABS, KRONE SD – PLATFORM – BPW – FULL AIR SUSPENSION – VEHICLE HISTORY * GERMAN VEHICLE * VIDEO AVAILABLE UPON REQUEST ----Vehicle* Manufacturer: Krone * Type: SD * Body: Platform semi-trailer * First registration: June 15, 2012 * 3 axles Chassis / Axles* BPW axles * Full air suspension * Disc brakes Tires* 385/55 R22.5 * 160J according to vehicle documents Body / Load securing* Stanchion box on both sides * Side-extendable stanchion holders * 6 manual steel cable winches per side * A total of 12 steel cable winches Toolboxes* 2 toolboxes Dimensions* Length: 13,860 mm * Width: 2,550 mm * Height: 3,885 mm Weights* Permissible total weight: 36,000 kg * Technically permissible total weight: 39,000 kg * Axle load: 9,000 kg per axle ----* EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR * EXPORT SALES ONLY WITH DEPOSIT MIN. 500 EUR - 2000 EUR EXPORT REGISTRATION, CUSTOMS EXW IN 10 MINUTES (APPROVED EXPORTER) 5 DAYS, 15 DAYS, 30 DAYS REGISTRATION, AND 15 DAYS AUSTRIAN REGISTRATION EURO 1 TECHNICAL DATA SHEET VEHICLE RESERVATIONS SHOULD ONLY BE MADE VIA THE E-MAIL FUNCTION. VERBAL RESERVATIONS ARE NOT VALID. For sales to EU & non-EU countries, a deposit of at least 500.00 EUR / 1,000.00 EUR will be charged. Subject to changes, errors and prior sale! You can find more vehicles on our website. Ndsdpfozz Eflsx Akkjc Sales are exclusively subject to our general terms and conditions - see homepage. Important note – Important information: Despite careful checking of all details in our offer, errors may occur. These are sometimes caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not constitute a legal claim. Legal: This sales advertisement does not constitute an offer within the meaning of § 145 BGB. Rather, it provides information for the initiation of a contract. The information provided here is without guarantee and therefore does not constitute guaranteed characteristics.

Condition: new, maximum load weight: 37,560 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Year of construction: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle is a trailing steered axle with electro-pneumatic steering lock * Trailing axle lock for shunting purposes activated from the cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function plus RtR valve ----Electrics / Lighting: * Smart-Board information panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED warning beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator circuit * Tire pressure monitoring with display option in truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Landing gear at front plus rear swing-down supports on the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign kits at front and rear * Swivel arm as a carrier for connection cables from truck to trailer ----Low Loader Deck: Nodpfoykx Nkox Akksdc * Second king pin position * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high aluminum drop sides (painted in RAL color of choice) on saddle platform, foldable and removable * Removable rear wall -150 mm high * Rear slope at saddle platform to low bed approx. 700 mm long with chequer plate covering, as well as lashing bar with holes for attaching aluminum loading ramps * Saddle platform with 50 mm clamped timber planks and low bed platform with 60 mm clamped timber planks * Tread plate above the axles * 9 mechanical folding extensions to 3 m total width (not over rear slope; extension planks available, with closed transverse storage compartment under loading area) * Prepared for 3 mounting slots under saddle platform for storing optional aluminum loading ramps or timber planks for wheel well covers * Prepared for container locks on gooseneck ----Load Securing (LaSi Package): Saddle platform: * Perforated outer frame with 45°-angled holes for lashing points (2 t lashing force per point, minimum 480 mm apart) * 3 x 13.4 t lashing rings recessed into the floor on each side (one on the saddle platform, one on the longitudinal beams after the step, one over the middle axle next to the beam) Low Loader Platform: * 3 x 13.4 t lashing rings on the outer frame on each side (beginning of platform step, start and end of ramp slope) * 2 x 10 t lashing rings per side (between front wheel recess and 1st axle, between 2nd and 3rd axle) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Trough: * Extended excavator arm trough from the end of the last rigid axle over the steering axle up to the end crossmember, continuous with internal reinforcement, approx. W = 770 mm x Depth (rear ...

Condition: new, maximum load weight: 36,565 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer SPS Mega heavy-duty platform trailer available immediately! Technical specifications: * Fifth wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Wheelbase: 1,360 mm * Overall width: 2,550 mm * Gross vehicle weight [80 km/h] 45,000 kg * Gross vehicle weight [60 km/h] 46,000 kg * Unladen weight: 7,827 kg Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle liftable * 3rd axle as self-steering axle * Wabco braking system * Tires: 445/45/R 19.5 Chassis: * Chassis made of high-quality, high-strength S700 MC steel, in accordance with ISO standards 1726 Nsdperukucsfx Akkedc * 2 mm Omega profile reinforced 30 mm hardwood floor * 8x2 units of side extensions extendable up to 300 mm * Front landing gear, folding outriggers at the rear Ramp: * Mounts for ramps at the rear of the vehicle * Rear ramp storage box Load securing: * Lashing rings * Stake pockets * 6 x 2 container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 container locking devices * 1,500 mm high steel bulkhead with Code XL certification Accessories: * 1x stainless steel toolbox * Stake box Chassis color: RAL 3020 Traffic Red We are happy to provide you with further information.

Condition: new, maximum load weight: 36,565 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,550 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2026, Equipment: ABS, Brand new Kässbohrer SPS Mega heavy-duty platform trailer available immediately! Technical data: * Fifth wheel height: 950 mm * Platform length: 13,550 mm * Gooseneck: 120 mm * Platform height: 1,040 mm * Wheelbase: 7,700 mm * Axle spacing: 1,360 mm * Total width: 2,550 mm * Technical total weight [80 km/sa] 45,000 kg * Technical total weight [60 km/h] 46,000 kg * Empty weight: 7,827 kg Nsdpfxorukurs Akkjdc Chassis: * BPW axles with air suspension and disc brakes * Air suspension with load gauge * 1st axle can be lifted * Wabco braking system * Tires 445/45/R 19.5 Chassis: * Chassis, made of high-quality and high-strength S700 MC steel, in accordance with ISO 1726 * 2 mm Omega profile reinforced 30 mm hardwood floor * 8x2 units of side extensions extendable up to 300 mm * Support winch at the front, foldable supports at the rear Ramp: * Mounts for ramps at the rear of the vehicle * Ramp storage box at the rear Load securing: * Lashing rings * Stake pockets * 6 x 2 pcs. container locking pockets (suitable for 1x20 ft., 2x20 ft., 1x40 ft. containers) + 2 x 2 pcs. container locks * Front wall made of steel material with a height of 1,500 mm with Code XL certificate Accessories: * 1x stainless steel tool box * Stake box Chassis color: RAL 3020 traffic red We are happy to provide you with further information

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, Equipment: ABS, New vehicle / stock vehicle / in transit? Also available with individual configuration options / starting from €32,000. For sale: a Wielton semi-trailer for construction materials, designed for professional use in the transport of construction materials and general cargo. Nedpfx Aksypa A Ajkodc Further equipment and individual modifications are possible at any time – we will configure your vehicle exactly according to your requirements. Example photo. Equipment may vary depending on the configuration.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, total length: 13,620 mm, total width: 2,500 mm, Year of construction: 2026, Equipment: ABS, running number 12409 SADDLE PLATEAU CONSTRUCTION MATERIAL KÖGEL 3-axle SN24/PLATEAU 144 x stake pockets, STEERABLE AXLE / LIFT / BPW manufacturer: KÖGEL first registration: NEW VEHICLE dimensions: 13620 x 2480 permissible total weight: 35000 kg unladen weight: 5640 kg axle load 15000 kg air suspension, liftable/lowerable disc brakes ABS EBS mileage: 0 axle manufacturer: BPW ECO PLUS 3 / NEW lift axle steerable axle trailing arm steering screen-printed floor folding stakes: 3 pairs lashing rings tool box body paint: silver chassis paint: black tire configuration: 6 tire condition: 100% rear tires 385 / 65 R 22.5, IDEAL FOR CONSTRUCTION MATERIALS with 21 pairs of lashing rings, each with a lashing force of 2500 kg with 8 x 18 stake pockets, 80 x 80 can also be used as lashing rings? 7200 kg stable floor? lift axle / STEERABLE AXLE Nedpfxezzgr He Akkjdc BPW ECO DISC 430 mm MULTILOCK OUTER FRAME, 2 tons lashing force each LASI 12642 XL with TRAILING ARM STEERABLE AXLE (friction-steered), NEW!!!! front end panel now made of aluminum, 2000 mm high TPMS tire pressure sensors now in the rims? all information without guarantee, subject to prior sale! if you have any questions about this or other vehicles, please call us. if you have any questions for this or another trailer / car please call us.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,620 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2026, Equipment: ABS, CHASSIS ? Welded steel construction made of high-quality S700 steel, weight-optimized ? Frame as a double-longitudinal beam with crossmembers and welded outer frame ? Attachment rails for straps under the side edge ? Working area according to ISO 1726:2003 ? 3 axles according to customer selection - technical axle load 9,000 kg ? SAF disc brake INTRADISC 22.5 ET 120 ? Air suspension ? Axle lift on the first axle, automatic / pneumatic ? Without axle lift on the third axle ? 2" kingpin according to SAE standard, replaceable ? Corner dimension 2,040 mm ? Mechanical 2-speed landing gear, full load, manufacturer JOST ? Side impact protection made of aluminum profiles, foldable, according to ECE R73 ? Rear underrun protection made of steel according to ECE R58 ? Rear lamp carrier made of lightweight steel sheet HYDRO ? Available saddle height unladen: 1,120 mm WHEELS AND TIRES ? Tire size 6x 385/55 R22.5 ? Steel rims 11.75 x 22.5 ET 120 ? Tire manufacturer according to manufacturer's choice: Goodyear / Hankook / Bridgestone (M+S) ? Protective caps for wheel nuts BRAKE SYSTEM ? Two-circuit compressed air brake system, manufacturer WABCO, ECE-compliant Nodpfxszy S Rrj Akksdc ? Anti-lock braking system EBS 2S/2M with vehicle stabilization function ? Lifting and lowering device (lift valve) ? Double-diaphragm spring brake cylinder ? ISO air connections ? Aluminum air reservoirs ELECTRICAL SYSTEM ? Lighting system 24V according to ECE R48 ? LED rear lights Aspöck-Ecoled III ? LED license plate light ? LED marker lights and side lights, alternately flashing ? LED reversing lights: 2x at the rear + 1x each on the left and right on the impact protection, switchable ? Connection boxes at the front: 2x 7-pole, 1x 15-pole and EBS box ? Without connection cables FLOOR ? Platform height 1,240 mm ? Hardwood floor ? Floor sealing completely around ? Forklift accessible up to 7,500 kg forklift axle load ? Aluminum pallet stop strips 15 mm ? 19 pairs of lashing points, each 2 tons BODY ? Body Libner OpenBox C+ ? Interior height 2,650 mm ? Body strength according to EN 12642 XL (VDI 2700) ? Aluminum front wall, lined with plywood on the inside ? Corner posts made of galvanized steel ? Aluminum hinged doors with cassette handles ? Roof and side tarpaulins PVC 900 g/m² ? Overall height 4,000 mm closed ? Overall height as a platform 4,100 mm ? Folded structure takes up 1,300 mm of the platform length ACCESSORIES ? 2 plastic wheel chocks with bracket ? 4 PVC mudguards per side, rear with splash guard ? PVC toolbox 195 l, lockable ? PVC water tank 30 l with soap dispenser ? Access ladder at the rear, extendable ? Aluminum extension ladder mounted on the chassis, L = 2,840 mm ? Rubber bumper at the rear, reinforced on the side with steel ? Continuous mud flap on the underrun protection PAINTING / COLOR SCHEME ? Steel parts blasted twice before painting ? KTL surface coating ? Dust-free painting of the top coat by robot ? Frame: black KTL RAL 7021 ? Saddle supports: black powder coated ? Axles and wheel hubs: black ? Rims: silver ? Roof tarpaulin: white ? Side tarpaulins: RAL 9005 - Deep black ? Components: galvanized MARKING / DOCUMENTS ? Type plate according to EU regulation with technical data ? 2 identification plates at the rear on the rear wall ? Reflective lateral contour marking according to ECE R48 ? Red on the rear, white on the side ? Certificate for load securing according to VDI 2700 - DIN EN 12642 XL ? Operating manual ? Inspection booklet VDI ADDITIONAL SYSTEMS ?

Condition: used, overall weight: 25,000 kg, axle configuration: 2 axles, first registration: 06/2014, Equipment: ABS, Visit our website, where you will find our complete vehicle inventory with many more photos and information in multiple languages. SEL 7566 Fliegl SZS 270 German registration / single owner First registration: 24.06.2014 Technical gross weight (kg): 27,000 Permitted total weight (kg): 25,000 Curb weight (kg): 5,100 VIN: WFDFLT22701003772 TIRES AND AXLES: Tires: 205/65 R 17.5 Axle configuration: 2 SAF axles Air suspension Drum brakes BODY: Internal dimensions: Width (m): 2.48 Length (m): 9.21 + Side panel height (m): 0.58 VEHICLE DOCUMENTS: Registration certificate (Schein) Vehicle title (Brief) German vehicle approval form M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO Ndjdpfxjx Ep Eys Akksc j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosnian) L. OBODYNSKA Ukrainian/Українська, Russian/Русский We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Although every effort has been made to ensure the accuracy of the information, we cannot be held liable for any errors or omissions. We kindly request that our customers consult the available photos. The specified dimensions are approximate values. Our vehicles are sold as-is, in their current condition. We invite customers to visit our facility to personally inspect the vehicle’s condition. Furthermore, we offer the possibility of a test drive. Please note that the batteries supplied with the vehicle are those currently installed. If the customer prefers new batteries, we are happy to provide pricing information.

Condition: new, maximum load weight: 63,960 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis * Welded construction made of high-quality steel profiles with continuous profile crossmembers * Designed for high point loads * Outer frame made of UNP steel Fifth Wheel Coupling * 2-inch kingpin Under-ride Protection * Compliant with EC standards, bolted design Side Under-run Protection * Compliant with EC standards Landing Gear * With single-side operation on the right * Support load approx. 66 t / lifting capacity approx. 24 t. Axles * 5 x 10 t air suspension axle assembly * Manufacturer: SAF * With drum brake approx. 400x200 mm * ABS, AGS * Wheel connection centrally mounted, 10-hole with ET 0 * Total air suspension travel approx. 200 mm * Of which lifting approx. 140 mm and lowering approx. 60 mm * Control via rotary slide valve with detent function Steering * 1 axle with trailing steering * 2nd axle fixed * 3rd, 4th and 5th axles with forced steering via tie rod * Lubrication points of swivel bearing centrally located outwards * Axle lift: first and second axles automatically liftable * With additional shutdown on the chassis Braking System * Two-circuit compressed air braking system compliant with EC with EBS and RSS * Automatic load-dependent regulation * Manufacturer: Wabco. * Spring-loaded cylinders as parking brake * Interchangeable secured coupling heads firmly mounted on the front cross member * Without connecting line to the tractor unit * Aluminum air tank Tires * 10x 445/65 R22.5 164J on rim 14.00 x 22.5 ET 0 * Manufacturer of our choice * TPMS: Tire pressure monitoring system TPMS according to ECE R141 * With data transmission to the tractor unit Fenders * Compliant with EC standards, 1st axle at the front, 2nd axle at the rear * 3rd, 4th and 5th axles each one 1/4 PVC fender at the front and rear * Rear fender with mud flaps. Load securing * 5 pairs of folding lashing rings * Evenly distributed (tensile force approx. 24.5 t) * 11 pairs of hook plates welded into the outer frame (tensile force approx. 3 t) * 10 pairs of lashing rings in the outer frame on the side, evenly distributed (tensile force approx. 10 t) * Recess pockets: - 10 pairs of recess pockets recessed in the outer frame * 6 pairs of recess pockets recessed in the floor (on the outside of the longitudinal beam) * Stake pockets: - 16 pieces of galvanized stake pockets, approx. 80x80x8 mm, approx. 850 mm usable length (with locking mechanism) * Stake magazine: one magazine for 8 pieces each on each side in front of the front wall * Stake pockets approx. 80/80 mm Front Wall * Bolted corner stakes with a steel approach plate over the entire width and height. Floor * Approx. 28 mm Z-hardwood floor recessed in the outer frame flush Lighting System * Compliant with EC standards, 24 volt with multi-chamber lights * LED side marker lights * LED position lights white at the front * LED outline lights at the rear * License plate lights. 1x15 and 2x7-pole. Plug connection on the front cross member Equipment * Outrigger with holder, double * Warning sign according to ECE 70 * Work lights on the lamp carrier (switched via reverse gear) * Holder for rotating beacon at the rear (incl. rotating beacon) * One climbing ladder each side fixed including pluggable climbing aid - Ndedpfxsz Dmndj Akkoc * Smart Board * Sticker "Vehicle swings out" * Sticker "Center of gra

Condition: used, first registration: 03/2002, next inspection (TÜV): 03/2027, Equipment: ABS, Export only Ndjdpey Dmq Djfx Akkoc Sale only abroad SPR 324 Kotschenreuther 3 axles

Condition: new, maximum load weight: 29,831 kg, overall weight: 36,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer Mega Platform Trailer Available Immediately TECHNICAL DATA: * K.SFS M / 90 - 12 / 27 DE Fifth wheel height 950 mm Kingpin capacity 15,000 kg Axle load 27,000 kg Total weight 42,000 kg Outer length 13,680 mm Inner length 13,610 mm Total width 2,550 mm Inner width 2,480 mm Wheelbase 7,700 mm Gooseneck 90 mm Unladen weight ±%3 6,169 kg CHASSIS: * Made of high-quality and high-strength S460 MC steel KTL coated and painted K-Fix (holes in the outer frame load capacity 2.5 tons) 3 x 9 tons BPW EAC (ECO Air Compact) axles with Disc brakes Njdpfor Ivwvex Akksdc * 1st axle can be lifted automatically * Wabco brake system * Air suspension with lifting and lowering valve * 6 tires 445/45 R19.5 * Mechanical trailer support from JOST * 30 mm phenolic resin-coated plywood floor with a forklift axle load of 8,000 kg in accordance with EN 283 * KTL-coated steel front panel with plywood protection inside with a height of 2,000 mm * OTHER: * Front wall height 2,000 mm * 1 x tool box made of steel with PVC coating, 1,500 mm wide in front of the axles * 2 x 4 RoRo rings in accordance with EN 29367-2 * 13 x 2 lashing rings for 2 ton capacity in the floor and 7x2 lashing rings for 5 ton capacity in the side frame * 7x2 stake pockets on the outer frame and 5 stake pockets in the middle * Additionally 2x2 additional stake pockets at the front * 4x2 container twistlocks for transporting 1 x 40 ft. or 2 x 20 ft. containers * Extra-wide boards (LED), * 7x2 lashing points on the outer frame with 1t capacity * Stake storage box on the front wall COLORS: * Color of the chassis RAL 3020 traffic red * Color of the front wall RAL 3020 traffic red We are happy to provide you with further information

Condition: new, maximum load weight: 32,155 kg, overall weight: 39,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads. Fifth Wheel: * Fifth wheel plate with 2-inch King Pin. Rear Underrun Protection: * According to EC standards, bolted design. Side Underrun Protection: * According to EC standards. Landing Gears: * 2x 12 t landing gears with leveling foot and one-sided operation on the right side in the direction of travel. Axles: * 3x 9 t air suspension axle, manufacturer SAF, with disc brake approx. 430 x 45 mm, wheel mounting center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, including lifting approx. 110 mm and lowering approx. 70 mm. * Control of the air suspension via hand control with stop function. Steering: * Last axle mechanically forced steering. Axle Lift: * First axle liftable, with fully automatic, load-dependent lift control. Braking System: * Two-line compressed air braking system according to EC standards with EBS and RSS, automatic load-dependent regulation, spring brake cylinders as parking brake, fail-safe coupling heads permanently mounted on the front crossmember, without connection line to the tractor. * Manufacturer: Wabco. Tires: * 6, 385/65 R22.5 160J on rim 11.75 X 22,5 ET 120 - manufacturer of our choice. Including tire pressure monitoring system, tire pressure display in the driver's cab (pre-installation by the tractor manufacturer). Fenders: * According to EC standards, 1/4 PVC fenders in front of and behind the axle. Load Securing: * 9 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t). * 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t). * In the outer frame, a hole for lashing straps is provided every approx. 500 mm (lashing straps can be hooked into the closed side walls, beveled outer frame). Stake Pockets: * 10 pairs of stake pockets in the outer frame, evenly distributed. * 4 rows of stake pockets transverse to the loading area. * Stakable stakes: 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm. * Inside on the front wall, magazine for 20 stakable stakes. Front Wall: * Reinforced steel construction, fixed, inside covered with approx. 9 mm screen-printed floor (approx. 1,250 mm high). Floor: * Approx. 28 mm Z-hardwood floor embedded in the outer frame. Side Walls: * 4 x 25 mm side walls and rear wall made of extruded aluminum profiles, foldable and removable, removable Kinnegrip stakes. * Side wall and stake magazine: under the chassis. * Left and right insertion rails for side walls and stakes. Nsdpfx Akjy Auhzskodc Lighting System: * According to EC standards, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. * 1x 15-pin and 2x 7-pin connector on the front crossmember. Equipment: * Chock with holder, two units. * Warning signs according to ECE 70. * Work lights on the lamp carrier (switched on via reverse gear). * Holder for rotating beacon on the rear, incl. rotating beacon. * 2 x stainless steel toolboxes, approx. 600 x 500 x 500 mm. Paint Finish: * Chassis and front wall sandblasted, primed and single-color top coated. * Chassis: hot-dip galvanized + R

Condition: new, maximum load weight: 39,280 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW Eco Plus axles * Last axle with trailing steering and electropneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system and ride height control valve ----Electrical System / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an information tool, with pressure sensors for displaying total axle load * 15-pin electrical connector * LED lighting system 12 / 24V * LED rotating beacon (detachable) rear left ----General Components: * Side impact protection * Front support winch and mechanical swivel supports at the rear of the chassis * Straight steel sheet fenders * Spare wheel holder under the chassis on the right side ----Low Loader Platform: * Saddle platform with 45° beveled front corners and a front toolbox made of galvanized steel sheet, dimensions: W = 2,480 x H = 500 x L = 665 mm with a hinged lid * On the side of the saddle platform, 400 mm aluminum sideboards (RAL 9010 pure white) that can be folded down and removed * Rear wall, height -150 mm, mounted * Rear slope on the saddle platform for the low bed, approx. 700 mm long * Saddle platform with 50 mm wooden planks and low loader platform with 60 mm wooden planks * Tread plate over the axles ----Extensions: * 8 x mechanical folding extensions to a total width of 3 m, but not in the rear slope (extension planks available for storage on the saddle platform) * Mechanically adjustable warning sign packages at the front and rear ----Load Securing System: * On the saddle platform, 2 x 6.3-ton lashing points each, and on the side, 3 x 5-ton lashing bars in the outer frame * In the low loader platform, on the side, 2 x 13.4-ton lashing points each, and 4 x 10-ton lashing points that can be swiveled and lowered, recessed in the outer frame * On the side, 2 x 6.4-ton lashing rings each, and 1 lashing point at the rear in the excavator arm support * 2 x container locks directly behind the bend in the low loader platform ----Excavator Arm Support: * Excavator arm support from the end of the last fixed axle to the steering axle to the end crossmember, continuous with an internal reinforcing profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanical, one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable on the side) * Control block, 4-way, for later customer retrofitting of hydraulic ramp adjustment * The outer plank on the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and in the approach slope ----Hydraulics: * Hydraulic distributor in the trailer (with hydraulic pump output in the truck of over 40 liters up to 120 liters/min) ----Loading Dimensions: * Loading area of the saddle platform: approx. 3,935 x 2,480 mm * Low bed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) ----Saddle Height: Nodpfx Akopk D I Aoksdc * approx. 1,220 mm (suitable for 2- and 3-axle semi-trailers) ----Paintwork: * Chassis, ramps, rear folding supports, extension brackets hot-dip galvanized * Axles, support winch, air tank painted in a black tone * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available for immedia

Condition: new, maximum load weight: 34,815 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 15,850 mm, total width: 2,550 mm, total height: 1,040 mm, Year of construction: 2026, Equipment: ABS, Cheese drill SPA Mega extendable HD platform trailer Immediately available TECHNICAL INFORMATION: Ndsdpfx Ajl N Syvokksc Semi-mounted height 950 mm * Outer length 13,535 mm * Gooseneck length 4285 mm * Platform length 8,950 mm * Extension 6,900 mm Platform extension * Extension locking positions 500 mm * Gooseneck 120 mm * Platform height (loaded) 1,040 mm * Wheelbase 7,700 mm * Overall width 2,550 mm * Gross vehicle weight (80 km/h) 45,000 kg * Gross vehicle weight (60 km/h) 46,000 kg * Unladen weight 10,185 kg CHASSIS: BPW axles with air suspension and disc brakes * 2x rigid axles at the front, 1x self-steering axle at the rear * Air suspension incl. load pressure gauge * 1st axle liftable * Wabco brake system * Tires 445/45 R19.5 * 1x spare wheel holder CHASSIS: Chassis made of high-quality and high-strength S700 MC steel * 30 mm hardwood floor * 8x2 side extensions extendable up to 300 mm * Telescopic support winch front 50t capacity * Mechanically folding rear outriggers 45t capacity RAMPE: Mounts for ramps at the rear of the vehicle LOAD SECURING: Lashing rings * Stake pockets * Container locks suitable for 1x20 ft , 2x20 ft , 1x40 ft , 1x45 ft , * 1,700 mm steel end wall with Code XL certificate ACCESSORIES: 1x stainless steel toolbox * Stanchion box on bulkhead * 2 x 2 extra-wide boards with LED lighting * Rotating beacon Chassis color RAL 3020 traffic red For further information please do not hesitate to contact us

Condition: new, maximum load weight: 36,500 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, total height: 1,250 mm, Equipment: ABS, MAX Trailer Type 210 NEW | Hydraulic Steering - Extendable | 36t Payload | 3 Axles | from €76,900 -- New vehicle – custom-configurable for your specific application. Njdeypaz Sopfx Akkjdc High payload capacity combined with robust construction and maximum efficiency. ----Highlights: • Extendable load platform with pneumatic locking • Multiple high-strength lashing points for optimal load securing • Hydro-mechanically steered BPW axles with disc brakes • Air suspension with lift and lower function • WABCO EBS braking system compliant with EU regulations • Mechanical JOST landing legs with 2-speed gearbox • LED lighting system • Tire Pressure Monitoring System (TPMS) ----Construction & Durability: • High-strength fine-grain steel structure • Metallized chassis with premium corrosion protection • Multi-layer paint finish with additional cavity sealing • Hard-wearing wooden floor in sturdy Omega profiles ----Inclusive Options: • Comfortable auxiliary steering via cable remote control • Electro-hydraulic unit • Galvanized front wall (approx. 1,200 mm) • EN 12642-XL body structure • 10 pairs of stake pockets for flexible load securing • Spare wheel carrier under the platform • Beacon holder • Reflective tape & European reflective plates • Air couplings at the front ----Additional equipment and individual adaptations are always possible – we configure your vehicle exactly to your requirements. Sample image. Equipment may vary depending on configuration.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, total length: 13,620 mm, total width: 2,500 mm, Year of construction: 2026, Equipment: ABS, running number 12410 SADDLE PLATFORM CONSTRUCTION MATERIAL KÖGEL 3-axle SN24/PLATFORM 144 x rung pockets, STEERABLE AXLE / LIFT / BPW manufacturer: KÖGEL first registration: NEW VEHICLE dimensions: 13620 x 2480 permissible total weight: 35000 kg unladen weight: 5640 kg axle load: 15000 kg air suspension, raise/lower function disc brakes ABS EBS mileage: 0 axle manufacturer: BPW ECO PLUS 3 / NEW lift axle steerable axle trailing arm steering screen-printed floor folding stanchions: 3 pairs Ndsdpjzzgr Tjfx Akkec tie-down straps toolbox body paint: silver chassis paint: black tire configuration: 6 tires tire condition: 100 % rear tires: 385 / 65 R 22.5, IDEAL CONSTRUCTION MATERIAL SADDLE with 21 pairs of tie-down straps, each with 2500 kg lashing force with 8 x 18 RUNG POCKETS, 80 x 80 can also be used as tie-down straps. 7200 kg stable floor. lift axle / STEERABLE AXLE BPW ECO DISC 430 mm MULTILOCK OUTER FRAME, 2 tons lashing force each LASI 12642 XL with TRAILING ARM STEERABLE AXLE (friction-steered), NEW!!!! front end wall now made of aluminum, 2000 mm high TPMS tire pressure sensors now in the rims? all information is without guarantee, subject to prior sale!! if you have any questions about this or other vehicles, please call us. if you have any questions for this or another trailer/car, please call us.

Condition: used, maximum load weight: 29,037 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2017, loading space length: 13,620 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,916 mm, Year of construction: 2017, Equipment: ABS, KRONE SDP 27DA01CLNF 3-Axle FLATBED SEMI-TRAILER WITH TRIDEC STEERED AXLE (Rod and Turntable) German trailer, first owner, excellent condition! DIMENSIONS: Overall length: 13,860 mm Height: 3,916 mm Width: 2,550 mm Loading length (internal): 13,620 mm Loading width (internal): 2,480 mm Fifth-wheel height: 1,150 mm Gross vehicle weight: 36,000 kg Unladen weight: 6,963 kg EQUIPMENT: - 3x 9t BPW EcoPlus axles with disc brakes (430 mm) - Air suspension with raising/lowering function, including automatic ride height reset - 1st axle: lift axle - 2 wheel chocks with holders - Tyres: 6x 385/55 R22.5 approx. 85–95%, steel rims 11.75x22.5 ET120 - WABCO EBS brake system with vehicle stability system - Spring-loaded parking brake - EBS unit 2S/2M, 2 sensors on one axle, diagnostics via ISO 7638 connection (EBS power cable) - Mechanical landing gear, 2x 12t, semi-circular with support plate - Single wheel plastic mudguards with spray protection as per EU directive ELECTRICS: - 24-volt lighting system with two 7-pin DIN ISO 1185/3731 sockets - 2x multifunction rear lights compliant with EU norms, including rear fog light and reverse lights - 2x LED license plate lights - Removable pole mount for rotating beacon - 3-pin rear socket for elongated marker lights - 2x LED reversing lights - 2x LED area lights - 2 LED outline marker lights with rubber arm - LED side marking lights - 2 ECE 70 warning boards at rear - 2 sets of oversize signs with LED outline lights front and rear BODY: - 30 mm thick waterproof board floor, edges sealed all around - Floor strength per DIN EN 283 for loads up to max. 7,000 kg forklift axle load - Steel front wall with reinforced corner posts, 2,000 mm high - Front wall reinforced inside with 9 mm phenolic plywood - Delta-steel ram profile transversely at rear PAINTWORK: - Steel parts shot blasted, KTL-primed and powder-coated - Standard single-color finish - Side underride guard and light bracket painted white - Axles incl. hubs in RAL 9005; attachments in black or galvanized - Rims in natural silver; contour markings as per ECE-R48 - Chassis: deep black - NOVAGRAU - Front wall: WHITE RAL 9011 - Rims: natural silver ACCESSORIES: - Stainless steel wheel trim rings - Pallet storage box, closed, for 24 Euro pallets - Stake pocket depot left/right for 5+5 plug-in stakes - Square timber holder at front bulkhead - Plastic toolbox with lock approx. 600x500mm - 29 stake pockets for 80x80mm plug-in stakes on center and outer frame + 10 steel stakes left/right on frame Nsdpfx Aey I E Ddskkedc - 12 pairs multi-lash lashing rings on Multilock outer frame - TRIDEC FORCED STEERING (rod and 2x turntable) wheelbase 1310 / 2050 mm - Central lubrication bar for Tridec steering at rear - Mud flaps on rear underride guard Condition is excellent for age and mileage, transport available at extra charge. All information without guarantee! Sale only to trade or export! ATTENTION: PRICE IS NET PLUS VAT German, English contact: JOSEF WhatsApp: We speak the following languages: German, Czech, Polish, Romanian, Russian, English

Condition: used, maximum load weight: 36,300 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 05/2027, 24 month guarantee from first registration, hydraulically steered hydraulically steered Nato Stweckdose central lubrication system fifth wheel dimension 1120 - 1300 mm loading height 1340 - 1520 mm depending on fifth wheel dimension 10t lashing eyes in the edge frame spacing 1200mm excess length board remote control rotating beacon pluggable LED 220V socket extension lights 3 axle telescopic semitrailer 1x extendable up to 7500 mm (500 mm steps) loading floor 28mm hardwood 10 ton lashing eyes in the edge frame (spacing 1200 mm) stake pockets in the edge frame for stakes 81 x 5 1mm removable front wall made of steel 1800mm high Ndedpfx Akomhd Ryjkec

Condition: used, maximum load weight: 21,320 kg, overall weight: 27,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space length: 13,550 mm, loading space height: 800 mm, Year of construction: 2022,

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2026, Year of construction: 2026, Equipment: ABS, Visit our website, where you will find our complete inventory with many more photos and information in several languages. SEL 81 Kögel S24-1 New | Lift axle OVERVIEW Year of construction: 28.07.2026 Country of registration: Germany Color: Black SPECIFICATIONS Technical permissible gross weight (kg): 42,000 Permissible total weight (kg): 36,000 Unladen weight (kg): 5,600 VIN: WK0S2400200337491 TIRES AND AXLES Axle configuration: 3 axles Axle 1: 385/55 R 22.5 | Air suspension | Disc brake | BPW | Lift axle Axle 2: 385/55 R 22.5 | Air suspension | Disc brake | BPW Axle 3: 385/55 R 22.5 | Air suspension | Disc brake | BPW BODY Width (m): 2.48 Length (m): 13.62 VEHICLE DOCUMENTS & INSPECTION Vehicle documents: Germany Registration certificate Certificate of Conformity (COC) Our vehicles are sold in their current condition. We invite customers to visit our company to personally inspect the condition of the vehicle. Additionally, we offer the option of a test drive. Please note that the batteries supplied with the vehicle are the ones currently installed. If the customer desires new batteries, we can provide pricing information. CONTACTS Michele Bufano Italian, German, English m. Joana Cordeiro Portuguese, Spanish, Italian, English, German 0049 1 j. Liza Obodynska Ukrainian, Russian, English Ndodpfezz Entex Akkjc Jovana Marjanovic Bosnian, German, English j.

Condition: new, maximum load weight: 30,740 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 8,000 mm, loading space width: 2,520 mm, Year of construction: 2026, TS 2 ML ----Brakes: Njdsykx I Hjpfx Akksdc * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Last axle as a trailing steering axle with electro-pneumatic steering lock activated by PIN in reverse gear * Additional lock for the trailing axle, operable from the driver's cab for maneuvering purposes – without truck-side installation – assigned to PIN 10; the lock must be disengaged before driving on public roads ----Suspension: * Air suspension with lift and lower function and RtR (Ride to Reduce) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's display via EBS signal – without truck-side installation * LED tail lights 12 / 24 V * Flashing side marker lights * LED reverse lights activated by reverse gear * SmartBoard installed as info tool with pressure sensors solely for total axle load display * 7-pin socket at the rear for illumination of overlength loads * LED beacon (removable) at the rear ----General Attachments: * Aluminum air tanks * Manual crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connection lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Lowbed Platform: * 50 mm thick flooring made from larch / Douglas fir instead of spruce / fir * Rear slope – 700 mm long – on the semi-trailer deck to the low bed with checker plate covering and at the end a perforated strip for attaching aluminum drive-on ramps * Tread plate cover over the wheels * SP combo package: toolbox with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum color, mounted on the semi-trailer platform approx. 2,480 x 500 mm * Hinged lid on top and side doors in the angled corners * Fold-down aluminum side boards, 500 mm high on the trailer platform, incl. foldable and removable rear stanchions * Plug-in aluminum rear wall, 150 mm high * 2nd kingpin position * Preparation for container locks * Preparation for 3 receiving pockets in the transition slope from lowbed to gooseneck * Preparation for retrofitting folding outriggers to achieve 3-meter width, including welded-in mounting brackets in the outer frame ----Load Securing: Semi-trailer platform: * 50 mm holes in the front corners and front for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor at the side near the approach slope * Perforated, 45°-bent outer frame with hole pattern for lashing equipment (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t retractable lashing rings recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings recessed centrally just in front of the approach slope to the gooseneck * Each side with 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings recessed into the outer frame * Each side with 4 stake pockets recessed into the outer frame * Profifix lashing rail in the center longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From end of last rigid axle to end cross member B = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings welded in place in the excavator arm rest) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminum drive-on ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t/pair) * Hydraulic ramp shifting on sliding tube of the ramp shaft ----Hydraulics: * Hydraulic flow divider in the trail

Condition: new, maximum load weight: 30,300 kg, overall weight: 36,000 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. The following is an excerpt of the equipment. Complete equipment list available upon request. Chassis: Welded construction made of high-quality steel profiles with continuous profile crossmembers. Designed for high point loads. Fifth wheel coupling: Fifth wheel plate with 2-inch King Pin. Rear underrun protection: Compliant with EC, bolted design. Side underrun protection: Compliant with EC. Kingpin supports: 2 x 12 t kingpin supports with leveling foot and single-sided operation on the right side in the direction of travel. Axles: 2x10 t air suspension axle unit, manufactured by BPW, with disc brake approx. 430x45 mm, wheel connection center-mounted ET120, ABS, total travel of the air suspension approx. 180 mm, of which approx. 110 mm lifting and approx. 70 mm lowering. Air suspension control via hand regulator with stop function. Steering: 2nd axle mechanically forced steering. Braking system: Dual-circuit compressed air braking system compliant with EC with EBS and RSS, automatic load-dependent control, spring brake cylinders as parking brake, interlock-protected coupling heads firmly mounted on the front crossmember, without connecting line to the towing vehicle. Manufactured by Wabco. Tires: 4 tires, 385/65 R22.5 164 K on rim 11.75 X 22,5 ET 120. Fenders: Compliant with EC, 1/4 PVC fender in front of and behind the axle unit. E-rack holder: 1 double basket with mounting material for one E-rack with ET120. Load securing: - 8 pairs of folding lashing rings, evenly distributed (tensile force approx. 8.0 t). - 7 pairs of folding lashing rings, evenly distributed (tensile force approx. 2.5 t). - A hole for lashing straps every approx. 500 mm in the outer frame. Stake pockets: - 8 pairs of stake pockets in the outer frame, evenly distributed. - 4 rows of stake pockets transverse to the loading area. Stakes: - 20 stakes made of galvanized tube approx. 80/50 mm, total length approx. 1,000 mm. - Magazine for 20 stakes inside the front wall. Ndsdjz N Nw Hepfx Akkjc Front wall: Bolted corner posts filled with aluminum hollow profiles, lined on the inside with approx. 9 mm screen printing board (approx. 1,250 mm high). Floor: Approx. 28 mm Z-hardwood floor recessed in the outer frame. Lighting system: Compliant with EC, 24 volts with multi-chamber lights, LED side marker lights, LED position lights white at the front, LED outline lights at the rear, license plate lights. 1x15- and 2x7-pin connector on the front crossmember. Equipment: - Wheel chock with holder, double. - Warning signs according to ECE 70. - Work lights on the lamp bracket (switched via reverse gear). - Holder for rotating beacon at the rear including rotating beacon. - 2 x PVC toolbox. Painting: Chassis blasted, cleaned, and hot-dip galvanized with high quality according to the latest technology. Superstructure parts cleaned, primed, and hot-dip galvanized. Chassis: Hot-dip galvanized + RAL, please specify. Outer frame: Hot-dip galvanized + RAL, please specify. Front wall: RAL, please specify. Front wall trim: Hot-dip galvanized. Hubs: KTL black. Rims: Silver. Rear underrun protection: White (RAL 9010). Attached parts: Galvanized / KTL black.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2026, Year of construction: 2026, Equipment: ABS, Visit our website, where you will find our complete vehicle inventory with many more photos and information in several languages. SEL 80 Kögel S24-1 New | Lift axle OVERVIEW Year of manufacture: 07/28/2026 Country of registration: Germany Color: Black SPECIFICATIONS Technically permissible total weight (kg): 42,000 Permissible total weight (kg): 36,000 Unladen weight (kg): 5,600 VIN: WK0S2400000337490 TIRES AND AXLES Axle configuration: 3 axles Axle 1: 385/55 R 22.5 | Air suspension | Disc brake | BPW | Lift axle Axle 2: 385/55 R 22.5 | Air suspension | Disc brake | BPW Axle 3: 385/55 R 22.5 | Air suspension | Disc brake | BPW BODY Interior dimensions Width (m): 2.48 Length (m): 13.62 VEHICLE DOCUMENTS & INSPECTION Vehicle documents: Germany Registration certificate Certificate of Conformity (COC) Additional documents available upon request for an extra charge. Our vehicles are sold as is. We invite customers to visit our facility to personally inspect the condition of the vehicle. We also offer the opportunity for a test drive. Please note that the batteries supplied with the vehicle are the ones currently installed. If the customer requests new batteries, we will be happy to provide price information. CONTACTS Michele Bufano Italian, German, English m. Joana Cordeiro Portuguese, Spanish, Italian, English, German 0049 1 j. Nodpozz Engjfx Akkedc Liza Obodynska Ukrainian, Russian, English Jovana Marjanovic Bosnian, German, English j.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2026, Equipment: ABS, Visit our website, where you will find our complete stock with many more photos and information in several languages. SEL Kögel S24-1 New | Lift axle OVERVIEW Color: Black SPECIFICATIONS Technical permissible total weight (kg): 42,000 Permissible total weight (kg): 36,000 Unladen weight (kg): 5,600 VIN: WK0S24002003374 TIRES AND AXLES Axle configuration: 3 axles Axle 1: 385/55 R 22.5 | Air suspension | Disc brake | BPW | Lift axle Axle 2: 385/55 R 22.5 | Air suspension | Disc brake | BPW Axle 3: 385/55 R 22.5 | Air suspension | Disc brake | BPW OTHER SPECIFICATIONS Kingpin pockets BODY Internal dimensions Width (m): 2.48 Length (m): 13.62 VEHICLE DOCUMENTS & INSPECTION Vehicle documentation: Germany Registration certificate Certificate of Conformity (COC) Our vehicles are sold as is. We invite customers to visit our company to personally inspect the vehicle's condition. In addition, we offer the possibility of a test drive. Please note that the batteries supplied with the vehicle are the ones currently installed. If the customer desires new batteries, we will provide pricing information. CONTACTS Michele Bufano Italian, German, English m. Nedpszwi R Dofx Akkedc Joana Cordeiro Portuguese, Spanish, Italian, English, German 0049 1 j. Liza Obodynska Ukrainian, Russian, English Jovana Marjanovic Bosnian, German, English j.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 08/2026, Year of construction: 2026, Equipment: ABS, Visit our website, where you can find our complete vehicle inventory with many more photos and information in several languages. SEL Kögel S24-1 New | Lift axle 4 x Side extension plates 2 x Rear marker lights Heavy-duty lashing eyes, 5 tons Perforated profile in the outer frame Socket for rotating beacon Headboard with extra planking Stake pockets in the floor + 12 stakes Light trailer - only 5,600 kg Point load 7,000 kg!!! OVERVIEW Year of manufacture: July 28, 2026 Country of registration: Germany Color: Black SPECIFICATIONS Technical total gross weight (kg): 42,000 Permissible total weight (kg): 36,000 Unladen weight (kg): 5,600 VIN: WK0S2400400337489 TIRES AND AXLES Axle configuration: 3 axles Axle 1: 385/55 R 22.5 | Air suspension | Disc brake | BPW | Lift axle Axle 2: 385/55 R 22.5 | Air suspension | Disc brake | BPW Axle 3: 385/55 R 22.5 | Air suspension | Disc brake | BPW OTHER SPECIFICATIONS Stake pockets BODY Internal dimensions Width (m): 2.48 Length (m): 13.62 VEHICLE DOCUMENTS & INSPECTION Vehicle documents: Germany Registration certificate Certificate of Conformity (COC) Our vehicles are sold as is, in their current condition. We invite customers to visit our company to personally inspect the condition of the vehicle. In addition, we offer the possibility of a test drive. Please note that the batteries supplied with the vehicle are the ones currently installed. If the customer requires new batteries, we can provide price information. CONTACTS Michele Bufano Italian, German, English m. Joana Cordeiro Portuguese, Spanish, Italian, English, German 0049 1 j.cordeiro@sz-eurologistik.de Liza Obodynska Ukrainian, Russian, English Nedpozt Ulrefx Akkodc Jovana Marjanovic Bosnian, German, English j.