Working platform semitrailer

WIELTON Baustoffsattel

Condition: new, maximum load weight: 44,000 kg, overall weight: 61,000 kg, axle configuration: 3 axles, Year of construction: 2026, Further information here: Bwedpfev D Abtsx Adwow

Condition: new, axle configuration: > 3 axles, permissible axle load (axle 1): 45 kg, permissible axle load (axle 2): 45 kg, permissible axle load (axle 3): 45 kg, loading space width: 3,000 mm, loading space height: 1,170 mm, total width: 3,000 mm, total height: 1,170 mm, suspension: hydraulics, tire size: 215/75R17.5, wheelbase: 1,500 mm, color: red, Year of construction: 2026, Main Features Year: New Universal Gooseneck SH 35/2 Loading platform: 3,700 mm x 2,440 mm 3.5 inch king pin Hydraulic lifting and lowering Hydraulic support cylinders Coupling height: 1,450 mm Integrated lashing points Lashing rings Spare wheel + spare wheel holder Hydraulic locking pin Automatic lubrication for gooseneck with Beka-MAX pump Hatz Diesel PPU Hatz single-cylinder diesel engine (silent pack) @ 9.6 kW 240 L hydraulic oil tank, powder coated 35 l/min flow rate and max. working pressure of 250 bar Three sizes of quick couplers for pressure connection Three sizes of quick couplers for tank connection Electric RPM control THP SL 3 Max. axle load: 45,000 kg per axle Total axle load: 3 x 45,000 kg = 135,000 kg GVW: 135,000 kg Unladen weight: 10,650 kg Payload: 124,350 kg Total length: 4,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 4 Max. axle load: 45,000 kg per axle Total axle load: 4 x 45,000 kg = 180,000 kg GVW: 180,000 kg Unladen weight: 13,850 kg Payload: 166,150 kg Total length: 6,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 5 Max. axle load: 45,000 kg per axle Total axle load: 5 x 45,000 kg = 225,000 kg GVW: 225,000 kg Unladen weight: 17,250 kg Payload: 207,750 kg Total length: 7,500 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) THP SL 6 Max. axle load: 45,000 kg per axle Total axle load: 6 x 45,000 kg = 270,000 kg GVW: 270,000 kg Unladen weight: 19,800 kg Payload: 250,200 kg Total length: 9,000 mm Loading platform width: 3,000 mm Height: 1,175 mm (+/- 300) Low Profile Deck FB 300 - 10,000 mm, without mechanical coupling, non-driveable - Payload rating in combination (6+6): 300 t - Height 300 mm, length 10,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - Bogies for modular configuration - Dead weight approx. 21,300 kg - Incl. hydraulic locking pin for connecting modular bogies lengthwise 1 x Low Profile Deck FB 250 - 8,000 mm, with mechanical coupling, non-driveable - Payload rating in combination (6+6): 170,000 kg - Height 250 mm, length 8,000 mm, width 2,990 mm - Coupling heads at front and rear for modular use - 1x extension for low profile deck, 4,000 mm - 1x extension for low profile deck, 5,000 mm General Information Year of construction: 2026 Axle Configuration Tyre size: 215/75 R17.5 Axle brand: BPW Eco Plus Suspension: hydraulic suspension Center axle 1: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 2: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 3: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Bwedpfx Adjx S Evbowjw Center axle 4: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 5: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Center axle 6: twin tyres; lifting axle; max. axle load: 45,000 kg; steered Functional Deck height: 117 cm Extendable chassis: Yes Condition General condition: very good Technical condition: very good Visual condition: very good Damages: none Financial Information...

Condition: new, empty load weight: 9,600 kg, maximum load weight: 53,400 kg, overall weight: 63,000 kg, axle configuration: > 3 axles, loading space length: 12,400 mm, loading space width: 2,540 mm, loading space height: 1,340 mm, suspension: air, tire size: 385/65 R22.5, color: grey, Equipment: ABS, Loading area: -Loading area with approx. 30 mm thick hardwood floor -10 pairs of lashing rings can be folded outwards Seat posts: -JOST seat posts with 2-speed gearbox for 24 t lifting load Axles and tires: -BPW axles, techn. 10,000 kg, first axle rigid, all other axles hydro-mechanically forced steered, mounted on turntable -Air-sprung with lifting and lowering valve -axle tool -385/65 R22.5 tires Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: -steel construction made of high-strength fine-grained steels -Steel grades: -S355J2+N/S355MC -S690QL/S700MC Electrical system: -Electrical system in accordance with EU regulations, 24 volt lighting -ASPÖCK UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection in accordance with ISO: 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Paintwork: -First-class and durable corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer A high-quality 2-component top coat in a single color in nova grey -Rear part metallized and painted in RAL 9010 Accessories included: -Loading area with approx. 30 mm thick hardwood floor -2" kingpin -One galvanized steel end wall approx. 1,200 mm high EN12642-XL -Yellow-red air couplings on the galvanized connection strip at the front -4 restraining shoes with holder on the front wall -Storage for 1,000 mm stanchions in the rear central support -On the gooseneck and on the rear panel on the left and right, one bracket each for the warning signs including socket -Reverse steering can be operated from the front and rear via cable remote control using pushbuttons, with tracking control of the axles -Electric hydraulic unit -White reflective tape in accordance with EU regulations on the side of the trailer and red at the rear -12 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -European reflector plates at the rear of the trailer Bsdpfx Adorq Dlfewjww -One bracket for a rotating beacon at the rear of the trailer -One mud flap at the rear of the trailer -Manual and description on USB stick -BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump -TPMS tire pressure monitoring system: -For correct display, the motor vehicle must be able to transmit and display this data -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control -5 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions -Speed stickers 80 km/h at the rear and on both sides -Adjustable access ladder mounted on the left and right in the direction of travel -2 reversing lights mounted on the rear panel -Load manometer for determining the axle loads including load diagram HRM metallization of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: used, maximum load weight: 24,000 kg, overall weight: 34,500 kg, axle configuration: 2 axles, first registration: 03/1988, next inspection (TÜV): 06/2026, Gooseneck Length: 3350 mm Width: 2,490 mm Steering radius: 2300 mm Fifth wheel load: 14,500 kg Fifth wheel height: 1,300 mm Bjdsxc Dbhspfx Adwoww Low bed Loading platform length: 4,660 mm incl. 400 mm chamfer Width: 2,500 mm Extendable to 3,000 mm Loading height: 650 mm Chassis Loaded platform height: 900 mm Length: 3,000 mm incl. 800 mm chamfer Width: 2,500 mm Chamfer: 800 mm Rear hydraulic support 2-part hydraulic ramps Length 1: 2,500 mm Length 2: 1,100 mm Width: 720 mm Fifth wheel load: 14,500 kg Rear axle load: 2 x 10,000 kg Gross weight: 34,500 kg Payload: 24,000 kg Kerb weight: 10,500 kg

Condition: used, maximum load weight: 64,900 kg, overall weight: 94,100 kg, axle configuration: > 3 axles, first registration: 08/2021, Gooseneck, detachable * Loading platform: 3,750 mm x 2,480 mm * Maximum technical saddle load: 30,000 kg (without using the front axle) * Hydromechanical steering with multi-chamber hydraulic cylinder * Hydraulic lifting and lowering function * 2 support cylinders * Hydraulic differential lock * Operating elements for hydraulic functions on the left-hand side in the direction of travel, including a pressure gauge with a diagram for determining saddle load, as well as a pressure gauge for monitoring the pre-tension pressure in the steering system * Access ladder to the gooseneck * Hydraulic claw locking for the platform or axle * Multifunction quick coupler * Air gun for cleaning the multifunction quick coupler ---- Front 2-axle axle assembly * 4 wheels per axle line, ball-bearing swivel axle units * Axle manufacturer / BPW * Axle width: 2,750 mm / Wheelbase: 1,510 mm * Single tires: Conti 245/70 R 17.5 143/141K (146/146 F), tread HT3, 3PMS * Hydraulic axle equalization, lift: 600 mm * Ride height: 1,145 mm + 340 mm / - 260 mm * Additional lifting option for all axles in the front axle assembly * Floor covering: sheet metal * Additional warning sign holders, mounted on the front axle assembly ----Braking system with TIM Drum brake all-wheel drive air brake system with diaphragm brake cylinders * Automatic load-dependent brake (ALB) (AGS) * Parking brake by means of spring-loaded cylinders * EBS / ABS (Electronic Braking System) manufactured by KNORR-BREMSE * Socket for EBS on the front end of the gooseneck * Vehicle stability control RSP (Roll Stability Program) ----Flatbed platform, single telescopic * Two external box-shaped outer/inner beams * Height of the outer beams: 300 mm * Carrier width of the outer beams: 730 mm + 120 mm edge strip * Front end with coupling claws * Without floor covering between the two longitudinal beams * (L x W) 7,500 mm x 2,750 mm, telescopable by 2,800 mm to a maximum of 10,300 mm * With a separating point * Loading height, loaded: approx. 450 mm, ground clearance: approx. 150 mm * Including a short, permanently welded-on front ramp * And 1 pair of aluminum ramp wedges, at the front ----Rear 4-axle axle assembly * 4 wheels per axle line, ball-bearing swivel axle units * Axle manufacturer / BPW * Axle width: 2,750 mm / Wheelbase: 1,510 mm * Single tires: Conti 245/70 R 17.5 143/141K (146/146 F), tread HT3, 3PMS * Hydraulic axle equalization, lift: 600 mm * Ride height: 1,100 mm + 385 mm / - 215 mm * Floor covering: sheet metal ----Combined excavator-tipping body * (Length x Width) 5,770 mm x 880 mm/1,538 mm * Splash guard with water-absorbing mats on all axles * Aluminum partition sheet in the excavator body, front and rear, plug-in ----Load securing Gooseneck * 4 pairs of threaded sockets M30 * 1 pair of lashing points LC 20000 daN * 2 pairs of lashing points LC 800 daN Front axle assembly * 3 pairs of threaded sockets M36 on the loading platform (16,000 daN) * 1 pair of threaded sockets M36 on the side (16,000 daN) * 1 pair of lashing points LC 20000 daN Loading platform, flatbed * 1 pair of lashing points LC 20000 daN * 3 pairs of lashing points LC 10000 daN * 3 pairs of threaded sockets M 30 * 3 pairs of threaded sockets M30 on the inner beam Axle assembly * 2 pairs of lashing points LC 10000 daN * 2 pairs of threaded sockets M36 on the loading platform (16,000 daN) * 3 pairs of rail pockets 100 x 50 mm (LC 2000 daN) * 1 pair of threaded sockets M36 in the excavator body (16,000 daN) Bwedpfx Aoz Ivnuodwow * 4 pairs of el