Used working platform trailers for sale (71)

Condition: new, maximum load weight: 9,000 kg, overall weight: 11,600 kg, axle configuration: 2 axles, loading space length: 9,080 mm, loading space width: 2,520 mm, loading space height: 850 mm, total width: 2,550 mm, Year of construction: 2026, Metal-Fach T014/2 Bale Wagon 2-Axle Platform Trailer Flatbed Trailer New Vehicle Year of Manufacture: 2026 Overall Dimensions: 9089mm + 800mm x 2520mm x 2880mm Internal Dimensions: 6409mm + 800mm x 2380mm Loading Height: 1150mm GVW (Gross Vehicle Weight): 11600kg Unladen Weight: 2600kg Payload: 9000kg Tires: 400/60-15.5 Extendable Loading Platform Wide Tires Air Pressure Brakes ALB Controller Lateral Underrun Protection Side Lighting Parabolic Suspension Parking Brake Adjustable Loading Grille at Front and Rear Y-Drawbar 40 km/h Approval Possible Lajdohlr Rdopfx Anioh Fenders Custom Paint Possible ATTENTION!!!!! PLEASE READ!!!!! We expressly reserve the right of prior sale, as we offer this item on other platforms as well. We strongly recommend an inspection and verification to avoid any misunderstandings regarding the condition and suitability for the buyer. Inspections and verifications are possible and expressly desired at any time after prior arrangement!!! Illustrations are similar and may include optional accessories that incur extra costs. The stated internal dimensions are approximate. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! EXCHANGE DEALS AND PAYMENT PLANS POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday, 8:30 a.m. to 5:00 p.m., Saturday, 8:30 a.m. to 2:00 p.m. Constantly over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: used, maximum load weight: 1,007 kg, overall weight: 1,500 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 3,070 mm, loading space width: 1,870 mm, loading space height: 100 mm, total width: 1,960 mm, total height: 925 mm, A66 GW26NG000373 100 km/h type approval Platform trailer Support wheel Loading ramps Errors and prior sale reserved Lsdjyq U Enepfx Anioah

Condition: new, maximum load weight: 2,535 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,700 mm, loading space width: 2,180 mm, loading space height: 200 mm, total width: 2,305 mm, total height: 1,690 mm, Year of construction: 2026, Equipment: tail-lift, Allcomfort Tandem Multi-Purpose Trailer MTKA 354722 Description: It makes every job as comfortable as possible for you: The hydraulic bridge can be easily tilted with a hand pump, and gas springs assist in operating the ramp. Thanks to the low loading height of 640 mm (single-axle) or 650 mm (tandem-axle), the angle of approach remains very shallow. To help you load the vehicles onto the trailer effortlessly, a robust, optional winch stand with a winch is available. The well-engineered chassis technology of the MTK Allcomfort ensures exceptionally smooth driving. Technical Data: Ledpfozdcpujx Anijah * Trailer type - Two-axle * Construction type - Aluminum * Weight - 965 kg * Gross vehicle weight - 3,500 kg * Payload - 2,535 kg * Internal length - 4,700 mm * Overall length - 6,250 mm * Internal width - 2,180 mm * Overall width - 2,305 mm * Internal height - 200 mm * Overall height - 1,690 mm * Loading height - 650 mm * Tires - 13 inches Standard Equipment: Bolted, hot-dip galvanized chassis * Welded, hot-dip galvanized tilting bridge * Tilting bridge with double-acting hydraulics * Side walls made of aluminum * Wooden floor 18 mm * 6 pairs of tie-down points at a length of 4200 mm, each with a tie-down force of 400 kg in the outer frame, DEKRA tested * 8 pairs of tie-down points at a length of 4700 mm, each with a tie-down force of 400 kg in the outer frame, DEKRA tested * Ramp approximately 900 mm high with special perforated patterns and gas springs

Condition: used, maximum load weight: 949 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 4,010 mm, loading space width: 188 mm, loading space height: 110 mm, total width: 2,450 mm, total height: 860 mm, A13 GW2616429 Multitransporter 4018, manufactured by TEMARED, type DMC. Total weight: 1300 kg, 400x184cm, with inertia brake, 100 km/h (optional equipment), with foldable loading ramp (optional equipment), low-loader, lowerable. Lsdpfxeym Igds Anisah Loading height 400mm. Errors and prior sale excepted.

Condition: new, maximum load weight: 11,400 kg, overall weight: 15,000 kg, axle configuration: 3 axles, loading space length: 12,000 mm, loading space width: 2,480 mm, loading space height: 850 mm, total width: 2,550 mm, Year of construction: 2026, Metal-Fach T009 Bale Transport Trailer 3-axle flatbed trailer Platform trailer New vehicle Year of manufacture: 2026 Overall dimensions: 11,990 mm + 800 mm x 2,480 mm x 2,900 mm Internal dimensions: 9,300 mm + 800 mm x 2,380 mm x 1,875 mm Gross weight: 15,000 kg Unladen weight: 3,560 kg Payload: 11,440 kg Loading height: 1,160 mm Tyres: 500/50-17 Extendable loading area Wide tyres Air-braked ALB regulator Side underride guard Side lighting Parabolic suspension Parking brake Adjustable front and rear load guard Y-drawbar Approval possible for 40 km/h Mudguards Custom painting available !!! ATTENTION – PLEASE READ CAREFULLY !!! We expressly reserve the right to prior sale, as this item is also advertised on other platforms. We strongly recommend a viewing and inspection to avoid misunderstandings regarding the condition and suitability for your needs. Viewings and inspections are possible at any time by appointment and are strongly encouraged!!! Images are for reference only and may show optional, chargeable accessories. All internal dimensions are approximate. TRADE-INS POSSIBLE FOR ALMOST EVERYTHING!!! Lodpfx Aotw N D Senioah PART-EXCHANGE AND TOP-UP DEALS POSSIBLE!!! Showground: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 am to 5:00 pm, Saturday 8:30 am to 2:00 pm Over 500 new and used trailers in stock at all times!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 12,451 kg, overall weight: 16,000 kg, axle configuration: 3 axles, loading space length: 9,800 mm, Year of construction: 2025, Equipment: ABS, * Extendable loading platform by 90 cm * Knorr air pressure braking system * 3 axles with drum brakes Ljdpfeyvnwiex Anioah * Front and rear grilles ----* Tire dimension: * Technical total weight: 16000 kg * Tare weight: 3540 kg * Overall length: ----Vehicle number: 11937----Errors and prior sale excepted----Advertisements and various inscriptions have been digitally removed. -----We are happy to assist you with all the formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of the rest. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export handling, arranging financing, applying for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services. -----Your VTS Team

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm drawbar eye and height adjustment via coil spring & tension lock ----Lighting / Electrical System: * TPMS tire pressure monitoring system * Multi-voltage system * LED tail lights 12 / 24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General Components: * Side impact protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of plastic and rear mudguards made of straight, galvanized steel sheet, each with splash protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the tool box in the turntable platform * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability ----Load Securing (La-Si package consisting of): * 2 lashing points (6.4 tons) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, swivel and lowerable, loadable in all directions and recessed in the outer frame * 13.4 tons in the corners, otherwise 10 tons ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope), * Widening boards placed in the middle of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable on the side * 4-way control block for retrofitting of the hydraulic side ramp adjustment ----Loading Area: * above the turntable: approx. 1,960 x 2,520 mm & unladen approx. 1,070 mm Laedpfx Ael Th I Asnijh * rear loading area: approx. 6,500 x 2,520 mm & unladen approx. 910 mm (incl. 860 mm approach angle) ----Tires: * 235/75 R 17.5 twin tires ----Unladen Weight: * approx. 5,980 kg unladen weight ----Painting: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in a black shade ----Information: * Technically possible gross vehicle weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf

Condition: new, maximum load weight: 30,440 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, Equipment: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm drawbar eye and stepless height adjustment ----Electrical System / Lighting: * Tire pressure monitoring system with display option in the truck display via EBS signal - without truck-side installation - * SmartBoard as an information tool with pressure sensors for axle load display per axle group * 15-pin power connector * LED rear lights * LED marker lights (removable) at the rear ----General Components: * Warning sign packages at the front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, on the right side * Closed plastic fender at the front * Straight steel mudguards at the rear, each with splash protection (spray mist suppression) * Lateral impact protection Lasdpfxjylfvgs Anioh ----Low-bed Platform: * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and locking mechanism * Floor over the turntable platform made of 50 mm needlewood, and in the low-bed platform made of 60 mm needlewood * Rubber coating 20 mm instead of wooden floor in the running area with a low-bed length of 6,780 mm including the access ramp * Rubber coating on the access ramp, left and right, approx. 860 mm long * 4 lashing eye pockets on each side (however, no lashing bars included) with simultaneous 2-ton lashing capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load Securing (Lasi - Package): Turntable Platform: * 2 pairs of 13.4-ton lashing eyes in the outer frame of the turntable platform Low-bed: * 4 pairs of 10-ton lashing eyes on each side of the outer frame, retractable and loadable in all directions * 2 pairs of 13.4-ton swiveling lashing eyes on each side at the rear ----Ramps: * Rubber coating on the folding access ramps * Hydraulic folding ramps with hydraulic extendable front section, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load holding valves ----Rear Support: * Hydraulic rear support ----Width Extension: * 8 pairs of galvanized folding outriggers for 3 m overall width (however, not in the rear slope) * Width extension boards stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the access ramp, approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4-ton lashing eyes on the side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump output in the truck of over 40 - max. 120 l/min.) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm access ramp) * Loading area above the turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm, +/- 20 mm ----Painting: * Reflective contour striping on the sides and at the rear * Chassis, turntable, access ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in a black color ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egestorf

Condition: new, maximum load weight: 14,660 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, ETÜ-TA-R 19.0: ----Brakes: * Wabco EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: 2 x 10-ton BPW Eco axles ----Suspension: * Parabolic springs – 110 mm wide – with tandem equalizer ----Drawbar / Flange coupling: Lasdpfxsl Th Hwe Anijh Drawbar with 50 mm flange coupling and height-adjustable drawbar ----Electrical system / Lighting: * 15-pole power connector * LED rear lights * TPMS (Tire Pressure Monitoring System) ----General components: * Jost support legs at the front * Outboard folding supports at the rear * Side impact protection * Plastic quarter fenders ----Low-bed platform: * 50 mm softwood flooring * Provision in front of the front wall for the subsequent installation of container locking devices * Bolted smooth-plate front wall * Steel side walls – trapezoidally profiled – foldable with side gate spring lifters * Steel rear wall, retractable between the ramps – bracket for storage when not in use, located inside in front of the front wall * Rear cross members, bolted ----Load securing: * Perforated outer frame, bent at approximately 45 degrees, with a lashing capacity of 2 tons every 480 mm * Installation of 3-ton lashing eyes possible every 600 mm * One 10-ton lashing point in each front and rear corner; various holes in the front and end cross members for 1.2-ton lashing * Profifix lashing rail in the longitudinal axis, centered, for lashing capacity up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approximately 2,750 x 620 mm (can be retracted to 20 mm) * Approach angle at the rear, approximately 860 mm ----Painting: * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized * Painting of the side gates in RAL 9010 pure white * Painting of the side walls in an RAL color is possible for an additional charge * Axles, springs, air tanks, flange coupling, and support legs painted in a black shade ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale are subject to change ----Delivery time: * Available for immediate delivery from Egestorf near the A7 motorway

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, T3 Profile 30.0 ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW Eco axles ----Suspension: * Parabolic springs * Mechanical axle equalization at the rear ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking pin ----Electrical System / Lighting: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * 15-pin electrical connector ----General Components: * Side impact protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle covered in plastic mudguards, rear axle with straight, galvanized steel splash guards, each with splash protection * Reflective contour strip on the sides and at the rear * Hinged cover (hot-dip galvanized) for the toolbox in the turntable platform ----Low-loader Platform: * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope) * Extension boards stored in the center of the loading area ----Excavator Arm Rest: * Excavator arm rest extending over the rear axle to the end crossmember, approx. 2,100 mm long (2 pairs of 6.4-ton lashing points on each side in the excavator arm rest) ----Load Securing (Load Securing Package consisting of): * 2 lashing points (6.4 tons) at the front left & right on the main frame of the turntable platform * 5 pairs of UVV lashing points, swiveling and lowering, loadable in all directions and recessed into the outer frame in the corners, 13.4 tons, otherwise 10 tons ----Ramps: * Mechanical, one-piece ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment ----Loading Areas: * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) ----Loading Height: * Unladen loading height approx. 1,070 mm * Unladen loading height approx. 910 mm ----Tires: Lajdpex Ipa Njfx Anijh * 235/75 R 17.5 twin tires ----Paintwork: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black tone * Vehicle is hot-dip galvanized ----Information: * --Technically, a permissible total weight of 30,000 kg is possible-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, ETÜ-TA-R 14.4 ----Braking system: * EBS electronic braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Tow bar / Flange eye: * Tow bar height-adjustable by 300 mm * Tow bar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * RDÜ (tyre pressure monitoring system) * LED tail lights 12 / 24 V * 15-pin power connector ----General attachments: * Jost landing gear front * Externally mounted, hot-dip galvanized folding supports at rear * Plastic toolbox, front right, mounted on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Fittings in front of bulkhead for retrofitting container locks * Bolted flat sheet steel bulkhead * Drop sides made of trapezoidal-profiled steel sheet, folding with drop side lifting springs * Rear steel wall retractable between ramp holders, stowable in front of bulkhead when not in use * Bolted rear stanchions * Rear drive-on slope approx. 860 mm ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to install 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner Lajdpfx Aneq Dyvysijh * Various drillings for 1.2 t lashing points in front bulkhead and rear end crossmember ----Ramps: * One-piece, mechanical mesh ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) ----Paintwork: * Hot-dip galvanized chassis as well as tow bar, bulkhead, tailgate, and access ramps * Sideboard colour in RAL 9010 pure white * Painting of side walls in alternative RAL colours available at extra cost ----Info: * --Reinforced and certified body built according to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 11.9: ----Brake system: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle system ----Suspension: * Parabolic leaf springs with equalizing aggregate Lsdpfx Aol Thy Renioah ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange towing eye ----General attachments: * Jost mechanical support landing gear at the front * Rear external foldable support legs, hot-dip galvanized * Side underrun protection * Plastic quarter mudguards * Plastic toolbox mounted front-right on the bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Loading area: * 50 mm softwood floor * 20" container locks fitted at front and rear * Front bulkhead bolted, made from smooth sheet metal * Drop sides made from trapezoidal-profiled steel, foldable with tailgate spring assist * Rear stanchions, hot-dip galvanized and bolted ----Load securing: * Perforated outer frame, approx. 45° edged, with 2 t lashing capacity every 480 mm * Optional installation of 3 t folding lashing brackets every 600 mm (each side fitted with 5 lashing rings) * One 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for pneumatic-tyred and tracked vehicles * Rear stowage compartment beneath the loading platform, integrated in the chassis ----Paint/Coating: * Chassis, drawbar, front and rear bulkheads hot-dip galvanized * Side board color RAL 9010 pure white * Sides can be painted in any RAL color at extra cost ----Additional information: * New vehicle without registration * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 23,210 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, * T 3: * EBS braking system Laedpfx Anjq Dyv Ieieh * Emergency release device for spring accumulator cylinders * Drum brakes * 3 x 11 tons BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic mudguards and rear axle with straight, galvanized steel splash guards, each with splash protection * Reflective contour strip on the side and at the rear * Folding cover (hot-dip galvanized) for the toolbox in the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm - black powder-coated - on the side, under the chassis * 15-pole power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Drawbar with 40 mm drawbar eye and height adjustment via tension spring and locking mechanism * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability * La-Si package consisting of: 2 lashing points (6.4 tons) at the front left and right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and lowerable * Loadable in all directions and recessed in the corners of the outer frame, 13.4 tons, otherwise 10 tons * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear slope) * Extension boards under the loading area, stored in a storage compartment * Excavator arm rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 ton lashing points on the side in the excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable front section and load-holding check valves, hydraulic lateral ramp adjustment * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 l/min up to max. 140 l/min), dual-line hydraulics * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm access slope) * Loading height when loaded: approx. 860 mm +/- 30 mm, leveling system * Chassis, turntable, folding outriggers, rear supports and access ramps hot-dip galvanized. * Axles, springs, drawbar, air tank, etc. painted in black. * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Delivery from approx. week 50/2026

Condition: new, maximum load weight: 30,080 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * Drum brakes * 4 x 11 ton Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord infotool mounted with pressure sensors for total axle load display per axle group * Side and rear reflective contour tape * Removable LED beacon at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Closed single plastic mudguards at the front * Straight rear steel mud flaps each with spray suppression * Side underrun protection * Front extension in front of turntable platform approx. 520 mm with 45° corners and 3 storage compartments incl. lockable folding lids (open to the rear) * Chassis made of high-strength fine-grain steel * Floor above turntable platform made of 50 mm softwood and 60 mm softwood on low-bed platform * Outer planks of the ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform; one pair each (front & rear) of 13.4 t lashing rings on the outer frame; one pair each side of 10 t swivel and lowerable lashing rings, loadable in all directions and integrated in the outer frame; bolted 5 t lashing rings on the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear); 2 pairs of 6.4 t lashing rings at the sides of the excavator boom cradle * 11 pairs of folding outriggers for a total width of 3 meters (not on rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for widening planks made of sheet steel, mounted transverse to the load area in front of the 1st rear axle * Excavator boom cradle above the rear axle to end of incline approx. 2,300 x 740 x 190 mm * 2 wheel wells per side, approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with sliding cover (storage for covers at the front on the turntable platform) for transporting wheel loaders with 3,100 - 3,640 mm wheelbase * Mechanical drop-down supports at the rear Ljdexmpydspfx Anijah * Hydraulic folding ramps with hydraulically deployable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area above fifth wheel: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, turntable, folding outriggers, rear supports, and ramps hot-dip galvanized * Axles, air tanks, and drawbar painted black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to change and prior sale * Immediately available ex Egestorf

Condition: new, maximum load weight: 14,550 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2024, ETÜ-TA-R 19.0 ---- Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with manual lowering at the rear ---- Drawbar / Flange Drawbar Eye: * Drawbar with 50 mm flanged tow eye and height-adjustable drawbar ---- Electrical / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ---- General Attachments: * Jost landing gear at the front * External folding support legs at the rear * Tool box made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted right side (black powder-coated) * Side underrun protection * Plastic quarter mudguards ---- Low Loader Platform: * Reinforcement package for drilling rig transport on chassis - loading height + 20 mm Ljdpfx Aepk D D Hjnioah * 50 mm softwood floor in clamped design * Provision in front of the front wall for retrofitting container locks * Bolted front wall made of smooth sheet steel * Side walls made of trapezoidal-profiled steel, foldable with tailgate spring assist * Rear steel panel, can be inserted between the ramps - storage fixture in front of the front wall when not in use * Rear stakes bolted ---- Load Securing: * Perforated outer frame approx. 45° angled with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing rings every 600 mm * 1 x 10 t lashing ring each at the front and rear corners, various bore holes for 1.2 t lashing available in front and rear crossmembers ---- Ramps: * One-piece mechanical grating ramps with spring system for one-man operation, approx. 2,750 x 620 mm (can be narrowed to 20 mm apart) * Rear ramp slope approx. 860 mm ---- Tires: * Wheelbase: 1,310 mm * Tires: 235/75R17.5 ---- Paintwork: * Chassis, drawbar, front wall, tailgate, rear support legs, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black * Side wall paintwork in RAL 9010 pure white * Painting of side panels in any RAL color available at extra cost ---- Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ---- Delivery time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks Laodpfx Ajrwc R Renieh * Bolted 400 mm high smooth steel bulkhead * Bolted rear posts * Drop sides with spring assist ----Load Securing: * Perforated outer frame, approximately 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various holes for 1.2 t lashing points in the front and rear crossmembers * Profifix lashing rail, centered lengthways, for lashing up to LC 3,000 daN ----Ramps: * One-piece hydraulic mesh loading ramps, approx. 2,750 x 600 mm (collapsible to 20 mm clearance) * Hydraulic flow divider installed in trailer (for hydraulic pump flow from the truck exceeding 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted black * Drop side panels painted in RAL 9010 pure white * Painting of side panels in any RAL color available at extra cost ----Information: * New vehicle with manufacturer warranty * Subject to misprints and prior sale ----Delivery time: * Immediately available ex-works Egestorf

Condition: new, maximum load weight: 8,800 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 11.9: ----Brake System: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * 300 mm height-adjustable drawbar * 40 mm flange towing eye ----General Attachments: * Jost support winch at the front * External folding support legs at rear * Plastic toolbox on the right front exterior of the front wall * Side underride protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Load area 5.37 m * 50 mm softwood floor * Bolted bulkhead made from smooth sheet metal * Drop sides made of trapezoidal-profiled steel sheet, foldable, with drop-side spring assist * Steel tailgate, slidable between ramp supports when not in use, stowed inside in front of the bulkhead * Screw-mounted rear stanchions ----Load Securing: * Perforated external frame, bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to fit 3 t recessed lashing rings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various bores in the bulkhead and rear crossmember for 1.2 t lashing points ----Ramps: * One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be retracted to 20 mm) * Rear approach angle approx. 860 mm chassis ----Tyres: * Tyres 235/75 R 17.5 Lsdpfsl Th Nrsx Anieah ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, bulkhead, tailgate, folding supports, and access ramps hot-dip galvanized * Axles, springs, air tank, 40 mm flange towing eye coated in black * Drop-side panels painted in RAL2011 deep orange * Side walls can be painted in any RAL color for an additional charge ----Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 14,000 kg, overall weight: 18,000 kg, axle configuration: 3 axles, loading space length: 11,000 mm, loading space width: 2,550 mm, loading space height: 2,340 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2026, Equipment: tail-lift, * Metal-Fach T019/1 * Bale trailer * New vehicle * New model * Year of manufacture: 2026 * Gross vehicle weight: 18,000 kg * Payload: 14,000 kg * Tare weight: 4,000 kg * Overall dimensions: 13,627 mm x 2,550 mm x 3,500 mm Lodpfx Anjphk Thjieah * Loading area dimensions: 11,000 mm x 2,550 mm x 2,347 mm * Loading height: 1,153 mm * Loading grates at the front and rear * Tires: 445/45 R19.5 * Chassis made of high-quality steel * Floor made of diamond-plate steel * ADR axles * Lateral underrun protection * Tension chains for front and rear loading grates * Side access ladder * Eyelets for lashing straps, every 50 cm * Large storage box * LED lighting * Air brake system * Fenders on all wheels * 40 km/h approval ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right of prior sale, as we offer this item on other platforms as well. We strongly recommend an inspection and examination so that the buyer does not have any false expectations regarding the condition and suitability. Inspections and examinations are possible at any time by appointment and are expressly desired!!! Images are similar and may include optional accessories that incur an extra charge. The specified internal dimensions are approximate. The seller is not liable for errors, input errors, and data transmission errors. Changes and prior sale are reserved! Inspection and test drive only by telephone appointment. The information provided on the internet is a non-binding description and does not constitute guaranteed characteristics. This advertisement serves only as a preview of our vehicle and is not part of a purchase contract! PART EXCHANGE POSSIBLE FOR ALMOST ANYTHING!!! TRADE-INS AND PAYMENT PLANS POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday to Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. We constantly have over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 11.9: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange coupling: * Drawbar with 300 mm height adjustment * 40 mm flange coupling ----General components: * Jost landing gear at the front * External, hot-dip galvanized folding supports at the rear * Plastic quarter fenders * Plastic toolbox on the front right side, on the front panel ----Electrical system / Lighting: * TPMS tire pressure monitoring system * LED lighting ----Loading platform: * Loading platform 6.27 m * Suitable for container transport * 50 mm hardwood floor * Provision on the front panel for retrofitting container locking mechanisms * Bolted front panel made of smooth sheet metal * Side walls made of trapezoidal steel sheet, foldable with side board spring lifts * Steel rear wall can be slid in between the ramp supports when not in use, positioned inside in front of the front panel * Rear crossbars bolted on ----Load securing: * Perforated outer frame angled at approximately 45 degrees with a lashing force of 2 tons every 480 mm * Installation of 3-ton drop-side lashing eyes possible every 600 mm * 1 x 6.3-ton lashing eye at each front and rear corner * Various holes in the front and end beams for 1.2-ton lashing options ----Ramps: * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be telescoped together to 20 mm) * Approach angle at the rear approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: Lodpfx Asq Ra D Eenisah * Hot-dip galvanized chassis, drawbar, front panel, rear wall, rear crossbars, and loading ramps * Painting of the side boards in RAL 9010 pure white * Painting of the side walls in a RAL color possible at an extra charge ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space width: 2,480 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. Complete equipment list available upon request. Chassis * Steel welded construction made of welded longitudinal beams and pierced Z-shaped cross members * Narrow cross member spacing for high ground load, ramp storage * Between the longitudinal beams behind the axle assembly, below the loading area, two insertion pockets for one access ramp each * with locking plate in the head frame at the rear. Under-ride guard * according to EC Front kingpin * Kingpins with single-side operation * Rear support: Two adjustable drop-leg supports Axles * 2 x 10 t air suspension axle assembly * Manufacturer: SAF * Disc brakes approx. 370 x 45 mm * Wheel connection: 8-hole, center-mounted for twin tires, ABS * Total stroke of the air suspension approx. 310 mm, of which lifting approx. 250 mm and lowering approx. 60 mm * Control via hand lever with detent function. Tires * 8-ply, 265/55R 19.5 - Manufacturer: Goodyear * on steel rim 8.25 x 19.5. * Splash guard: made of PVC in front of and behind the axles according to EC Load securing * In the outer frame, a hole for lashing straps every approx. 150 mm, tensile force approx. 2.5 t (lashing straps can be attached when the side walls are closed, sloping outer frame) * 6 pairs of folding lashing rings, evenly distributed, tensile force approx. 8 t. * Recess pockets for stake pockets 80/50: 3 pairs of recess pockets in the outer frame, evenly distributed. Braking system * Compressed air braking system according to EC with EBS Laodoz Dmn Dspfx Anieh * Two spiral hoses as connection to the towing vehicle with coupling head red/yellow. * Spring brake on one axle. Floor * Approx. 28 mm Z-shaped hardwood floor embedded in the outer frame. Headboard * Removable from 25 mm side wall Lighting system * Lighting system according to EC, 24 Volt * Multi-chamber rear lights * License plate lights * Side marker lights and position lights at the rear * Connection plate on the left on the drawbar including connection cable with 15-pole and 2 x 7-pole plugs. Paint finish * Chassis shot-blasted, cleaned and high-quality hot-dip galvanized according to the latest technology. * Superstructure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL color of your choice * Side walls and side wall posts: RAL color of your choice * Under-ride guard: RAL 9010 pure white * Hubs: KTL black rims: RAL 9006 silver * Attachments: galvanized / KTL black * Contour marking: acc. to EC, yellow on the side and at the rear Incl. Accessories * Rear extension approx. 800 mm incl. under-ride guard * extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable fixed drawbar in length, 6 x approx. 100 mm * with screwed towing eye approx. 50 mm according to DIN 74053 * 4 rows of recess pockets transverse to the loading area, evenly distributed * 12 pieces of stake pockets made of galvanized tube, approx. 80/50/4 mm * approx. 1,000 mm long container locks for 1x20? container, extendable to approx. 2,820 mm, according to ISO 1496, EN 284 or EN 452 * 1 pair of aluminum access ramps * Load capacity per pair approx. 9,000 kg * 4 x stainless steel tool boxes between or behind the axles, 6 x 25 mm * Side walls and rear wall made of extruded aluminum hollow profiles, approx. 600 mm high, foldable and removable * removable Kinnegrip stakes

Condition: new, maximum load weight: 9,130 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,010 mm, loading space height: 325 mm, Year of construction: 2026, * ETS-TA-B 11.9: * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with compensating unit * Height-adjustable drawbar, approx. 300 mm * BPW landing gear * Mechanical drop supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * LED lighting * 50 mm softwood floor * One 6.3 t lashing point in the corners at the front bulkhead and rear end member, plus two 6.3 t UVV-compliant lashing rings recessed in the outer frame on each side * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,350 x 870 mm (20 mm inner spacing, ramps fixed and not movable) * Bulkhead, side walls, mudguards, and drawbar hot-dip galvanized * Axles, springs, air reservoir, and front landing gear painted in black Laedpfx Anowyhzpeish * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform: ----Brakes: * EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange coupling: * Drawbar, height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange coupling ---- Electrical system / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights, additional at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General components: * Mechanically adjustable 3 m warning sign package at the front and rear * Front support winch * Outboard folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, each on the left and right side * Lateral impact protection * Underrun protection * Plastic quarter fenders ----Loading area: * 400 mm high bolted front bulkhead * 50 mm hardwood flooring * 2 pairs of container locking devices (extendable to 3 m container outer width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locking devices extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load securing: * Perforated outer frame, bent at approx. 45 degrees with 2-ton lashing force every 480 mm * Installation of 3-ton lashing eyes possible every 600 mm - 5 x 3-ton UVV lashing eyes installed on each side - * 1 x 6.3-ton lashing point in each corner, front and rear (at the front directly behind the container locking devices in the wooden floor and at the rear in the end beam) * Various holes in the front and end beams for 1.2-ton lashing options ----Ramps: * 1 pair of aluminum sliding ramps approx. 3,570 x 410 mm (load capacity 10 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment recessed in the chassis below the loading area from the rear ----Painting: * ---Chassis, drawbar, front bulkhead, underrun protection and rear supports hot-dip galvanized--- * Axles, air tank, front support winch and flange coupling painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale reserved Ljdpfxjv D Tbkj Anisah ----Delivery time: * Available from week 39/2026

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton BPW Eco axles ----Suspension: * Parabolic springs ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via coil spring and tension lock ----Electrical System / Lighting: * TPMS (tire pressure monitoring system) * Multi-voltage system * LED taillights * Rotating beacon (removable) at the rear Lodex Ipb Hepfx Anijah * 15-pin power connector ----General Components: * Mechanical axle equalization at the rear * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of molded plastic and straight, galvanized steel splash guards at the rear, each with splash protection * Reflective contour tape on the sides and rear ----Low-Loader Platform: * Folding cover (hot-dip galvanized) for the tool compartment in the turntable platform * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear slope) * Extension planks stored in the center of the loading area ----Load Securing (LaSi Package): * 2 lashing eyes (6.4 tons) at the front left and right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and embedded in the outer frame - 13.4 tons in the corners, otherwise 10 tons ----Excavator Arm Rest: * Excavator arm rest extending over the rear axle to the end carrier, approx. 2,100 mm long (2 pairs of 6.4-ton lashing rings on each side in the excavator arm rest) ----Ramps: * Hydraulically operated, one-piece ramps (approx. 3,000 x 720 mm) * Hydraulic side ramp adjustment ----Loading Area: * Over the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) ----Loading Height: * Unladen: approx. 910 mm ----Tires: * 235/75 R 17.5 twin tires ----Paintwork: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black shade * Vehicle is hot-dip galvanized ----Information: * --Technically, a maximum permissible total weight of 30,000 kg is possible-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available for immediate delivery from Egestorf

Condition: new, machine/vehicle number: AHW BJT DP2700, empty load weight: 505 kg, maximum load weight: 2,195 kg, overall weight: 2,700 kg, loading space length: 2,800 mm, loading space width: 1,300 mm, Immediately available for transporting stage equipment or mini excavators. Machine transporter, cargo digger, plant trailer 2. Dimensions: 280x130x15cm, weight 2,700kg. Model with LED lighting. Tandem low-loader with chassis – inertia brake – tires 14" – loading platform height 38cm – galvanized steel body with perforated steel floor, DIN lashing eyes – shovel holder mounted – steel ramps, foldable and adjustable, support wheel. Laodpfozm Rigox Anioh Schedule a pick-up appointment now by calling 02182 699 0 690, Monday to Friday. 07.26 / 543-0110 VERSION 29002

Condition: new, maximum load weight: 16,180 kg, overall weight: 20,500 kg, axle configuration: 2 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and in the short term, on our website. Excerpt from the equipment: Complete equipment available upon request. Chassis * Steel welded structure made of welded longitudinal beams and pierced Z-shaped cross members * Narrow cross member spacing for high ground load capacity * Ramp storage between the longitudinal beams behind the axle assembly * Two pockets below the loading platform for one ramp each * With locking plate in the head frame at the rear Under-run protection * Compliant with EC regulations Front bolster * Bolsters with single-sided operation * Rear support: Two adjustable drop-down supports Axles * 2 x 10 t air suspension axle assembly * Manufacturer: SAF * Drum brakes approx. 300x200mm * Center-mounted for twin tires, ABS * Total travel of the air suspension approx. 200mm * Of which lifting approx. 140mm and lowering approx. 60mm * Control via hand lever with detent function Tires * 8x, 235/75 R17.5 * Manufacturer of our choice Ledpfx Anoz Dmnkjioah * Mounted on rim 6.75X17.5 with offset Splash guards * Made of PVC in front of and behind the axles, compliant with EC regulations Load securing * One hole for lashing straps in the outer frame approximately every 150 mm * Tensile force approx. 2.5 t * 6 pairs of folding lashing rings evenly distributed, tensile force approx. 8 t * Recess pockets for lashing bars 80/50 * 3 pairs of recess pockets in the outer frame, evenly distributed. Braking system * Air brake system compliant with EC regulations with EBS * Two spiral hoses as connection to the towing vehicle with coupling head red/yellow * Spring brake acting on one axle. Floor * Approx. 28 mm Z-shaped hardwood floor recessed in the outer frame. Lighting system * Lighting system compliant with EC regulations, 24 Volt * Multi-chamber rear lights * License plate lights * Side marker lights and position lights at the rear * Connection plate on the left on the drawbar, incl. connection cable with 15-pin and 2 x 7-pin plugs. Painting * Chassis blasted, cleaned and hot-dip galvanized with state-of-the-art technology. * Superstructure parts cleaned, primed and hot-dip galvanized * Chassis: Hot-dip galvanized + RAL color of choice * Hubs: KTL black * Under-run protection: RAL 9010 Pure White * Rims: RAL 9006 Silver * Attached parts: galvanized / KTL * Black contour marking: acc. to EC, yellow on the side and rear (with ES-GE logo) Incl. accessories * Rear extension by approx. 800 mm incl. under-run protection * Extendable loading platform * Load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable fixed drawbar in length, 6 x approx. 100 mm * With screwed drawbar eye approx. 50 mm acc. to DIN 74053 * 4 rows of recess pockets transverse to the loading area, evenly distributed * 12 pieces of lashing bars made of galvanized tube, approx. 80/50/4 mm, approx. 1,000 mm long * Container locking for 1x20? container, container locking 1 x 20? extendable to approx. 2,820 mm, acc. to ISO 1496, EN 284 or EN 452 * 1 pair of aluminum ramps, load capacity per pair approx. 9,000 kg * 4 x stainless steel toolboxes between or behind the axles * 2 wheel chocks with holder * Rotating beacon pluggable at the rear * Delivery of a 40-unit towing device (GG max. 13,500 kg)