Used Other Work Platform Trailers for sale (62)

Condition: new, maximum load weight: 16,400 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring accumulators * Drum brakes * 3 x 11 ton BPW Eco axles * Air suspension with lifting and lowering system * SmartBoard as an information tool on the trailer with pressure sensors for displaying total axle load per axle group * Lateral underrun protection * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic mudguards and rear axle with straight galvanized steel mud flaps, each with splash guards * Folding cover (hot-dip galvanized) for the toolbox in the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), on the right side * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Side marker lights with turn signal control * Drawbar with 40 mm drawbar eye and height adjustment via torsion spring & locking pin * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) * Rubber coating on the folding ramps and on the approach ramps on the left and right (approx. 860 mm long) * Rubber coating on the longitudinal members from the front to the end cross member * Hardwood flooring on the running surfaces of the low-bed platform * 4 lashing pockets on each side with simultaneous 2-ton lashing capability * La-Si package consisting of: 5 pairs of UVV lashing rings, swiveling and lowering, loadable in all directions and recessed in the outer frame - in the corners 13.4 tons, otherwise 10 tons * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear ramp) * Log holder under the loading area in the longitudinal direction * Roller stop in front of the front cross member, raised, with 1 x 6.4 ton lashing eye on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable front section and load-holding valves * Hydraulic lateral ramp adjustment * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider in the trailer (with hydraulic pump capacity in the truck of over 40 liters to max. 140 liters / min.) * Hydraulics control block, splash-proof * Dual-line hydraulics * Loading area above the turntable: approx. 1,960 x 2,520 mm, * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach ramp) * Loading height loaded approx. 890 mm +/- 20 mm air suspension * Chassis, turntable, roller stop, folding extensions & approach ramps hot-dip galvanized * Axles, turntable, drawbar, air reservoir, etc. painted in black * Loading height loaded: approx. 890 mm +/- 20 mm * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change Gkjdpfx Asq Dyvcsnqsb * Delivery from approx. week 45/2026

Condition: new, maximum load weight: 19,470 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,600 mm, loading space width: 2,500 mm, loading space height: 930 mm, Year of construction: 2026, Equipment: ABS, Now immediately available!!!!! JUMBO PLATFORM TRAILER KRONE 3-axle ADP 27/ zLNT4 BS / MULTILOCK/8600 mm/BPW Manufacturer: KRONE Registration date: NEW VEHICLE Dimensions: 8600 x 2480 x 930 Permissible total weight: 24000 kg Unladen weight: 4420 kg Payload: 19580 kg Air suspension, raise/lower function Drum brakes Spare wheel holder ABS EBS Axle manufacturer: BPW ECO Screen-printed floor Tie-down points Toolbox Paintwork, body: black Paintwork, chassis: black Tires: 12 Tire condition: 100% Tires, front axle: 235/75 R 17.5 Tires, rear axle: 235/75 R 17.5 MULTILOCK OUTER FRAME along the entire length BPW eco drum brake, 3 x 9000 kg axle RETRACTABLE DRAWBAR 2000 - 2400 mm Air suspension, raise/lower function, front and rear Technically, maximum permissible total weight of 27000 kg Gedpfx Aney U R T Roqekb ABS/EBS system 30 mm screen-printed floor Forklift-compatible with 5460 kg axle load STEEL FRONT WALL 1200 mm high Wheelbase 8545 mm / axle distance 2nd - 3rd axle: 1310 mm Overall length 10390 mm 880 mm lowered All information without guarantee, subject to prior sale!! If you have any questions about this or other vehicles, please call us.

Condition: used, overall weight: 2,000 kg, first registration: 08/1995, Trailer with frame for advertising banners or for transporting goods Gkedpfsynvdmjx Anqjb Location: Im Erlenkamp 15

Condition: new, machine/vehicle number: AHW BJT DP2700, empty load weight: 505 kg, maximum load weight: 2,195 kg, overall weight: 2,700 kg, loading space length: 2,800 mm, loading space width: 1,300 mm, Immediately available for transporting stage equipment or mini excavators. Machine transporter, cargo digger, plant trailer 2. Dimensions: 280x130x15cm, weight 2,700kg. Model with LED lighting. Tandem low-loader with chassis – inertia brake – tires 14" – loading platform height 38cm – galvanized steel body with perforated steel floor, DIN lashing eyes – shovel holder mounted – steel ramps, foldable and adjustable, support wheel. Gkjdpfxezm Rigs Anqsb Schedule a pick-up appointment now by calling 02182 699 0 690, Monday to Friday. 07.26 / 543-0110 VERSION 29002

Condition: new, overall weight: 3,500 kg, loading space length: 6,200 mm, loading space width: 2,100 mm, tire size: 13, Year of construction: 2025, ANHÄNGERWIRTZ, your go-to place for new trailers, offers high-quality brand-name products! Over 850 new trailers in stock. Over 130 used trailers constantly available. Non-binding example: Variant machine transporter Variant multi-purpose transporter 3563 UX, 620x210x30cm, 3800kg, braked tandem axle, high-sided platform with low chassis, 13" wheels, tilting flatbed with manual hydraulics, 30cm folding aluminum side panels, continuous loading flap 90cm high with lifting aid, DIN lashing eyes in the chassis frame, automatic support wheel, modern LED lighting... And available in various lengths and configurations. Trailershop offers you the unique Roadster at a fair price with short-term availability. New vehicle, invoice with VAT, warranty from an authorized dealer with 35 years of experience. Gksdpfx Anozdyd Ujqeb Copyright on images, text, and logos 06.2026 VDK-3563UX30BLACK

Condition: new, maximum load weight: 30,440 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, Equipment: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm drawbar eye and stepless height adjustment ----Electrical System / Lighting: * Tire pressure monitoring system with display option in the truck display via EBS signal - without truck-side installation - * SmartBoard as an information tool with pressure sensors for axle load display per axle group * 15-pin power connector * LED rear lights * LED marker lights (removable) at the rear ----General Components: * Warning sign packages at the front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, on the right side * Closed plastic fender at the front * Straight steel mudguards at the rear, each with splash protection (spray mist suppression) * Lateral impact protection ----Low-bed Platform: Gksdpeylfvgjfx Anqeb * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and locking mechanism * Floor over the turntable platform made of 50 mm needlewood, and in the low-bed platform made of 60 mm needlewood * Rubber coating 20 mm instead of wooden floor in the running area with a low-bed length of 6,780 mm including the access ramp * Rubber coating on the access ramp, left and right, approx. 860 mm long * 4 lashing eye pockets on each side (however, no lashing bars included) with simultaneous 2-ton lashing capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load Securing (Lasi - Package): Turntable Platform: * 2 pairs of 13.4-ton lashing eyes in the outer frame of the turntable platform Low-bed: * 4 pairs of 10-ton lashing eyes on each side of the outer frame, retractable and loadable in all directions * 2 pairs of 13.4-ton swiveling lashing eyes on each side at the rear ----Ramps: * Rubber coating on the folding access ramps * Hydraulic folding ramps with hydraulic extendable front section, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load holding valves ----Rear Support: * Hydraulic rear support ----Width Extension: * 8 pairs of galvanized folding outriggers for 3 m overall width (however, not in the rear slope) * Width extension boards stored in a compartment on the left side ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the access ramp, approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4-ton lashing eyes on the side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump output in the truck of over 40 - max. 120 l/min.) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm access ramp) * Loading area above the turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm, +/- 20 mm ----Painting: * Reflective contour striping on the sides and at the rear * Chassis, turntable, access ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in a black color ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egestorf

Condition: used, maximum load weight: 31,000 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 07/2024, loading space length: 9,290 mm, loading space width: 2,520 mm, loading space height: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) Gkodpfxel Tlhrs Anqob * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 4 x 11-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and rapid drop valve ----Drawbar: * Drawbar with 50 mm drawbar eye and height adjustment ----Lighting / Electrical: * EBS multi-voltage system with 12 & 24 V electrical system * 15-pole power connector * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (switched via reverse gear) ----General attachments: * Manometer - pressure gauge for load weight determination (axles separated into 2 air suspension circuits) * Lateral impact guard * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fenders with splash protection * Rear straight, galvanized steel splash guards with splash protection * Reflective contour strips on the sides and at the rear * Tool box made of galvanized steel sheet, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low-bed platform: * Extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOTER welded anti-slip surface on the steel plate of the turntable platform * Hardwood flooring on the running surfaces of the low-bed platform ----Load securing (La-Si-package consisting of): * 1 x 13.4-ton UVV lashing eye on each side in front of the front bulkhead support * 4 holes on each side in the turntable platform, each with a lashing force of 2 tons * 1 pair of lashing eyes (13.4 tons) hanging at the rear on the left and right in front of the rear crossbeam * 4 pairs of UVV lashing rings (10 tons) on each side, swiveling and lowerable, loadable in all directions and recessed in the outer frame * 3 rung pockets on each side with simultaneous 2-ton lashing option ----Widening package: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (but not in the rear slope) * Beam holder for widening extensions under the chassis on the left in the longitudinal direction ----Excavator arm rest: * Excavator arm rest above the rear axle up to the end crossbeam, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4-ton lashing eyes on each side in the excavator arm rest ----Ramps: * Hydraulic, one-piece ramps (approx. 3,000 x 720 mm) mechanically adjustable on the sides * Outer beams of the ramps made of hardwood * Steel construction as preparation for a 6-way control valve ----Loading height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tires: * Tires 235/75 R 17.5 ----Paint: * Chassis, turntable, folding outriggers, mechanical support legs, ramps hot-dip galvanized * --Axles, air tanks, drawbar painted in a black tone-- ----Info: * Vehicle has a temporary registration in 07/2024, due to a missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change ----Delivery time: * Immediately available from Egestorf

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm drawbar eye and height adjustment via coil spring & tension lock ----Lighting / Electrical System: * TPMS tire pressure monitoring system * Multi-voltage system * LED tail lights 12 / 24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General Components: * Side impact protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of plastic and rear mudguards made of straight, galvanized steel sheet, each with splash protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the tool box in the turntable platform * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability ----Load Securing (La-Si package consisting of): * 2 lashing points (6.4 tons) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, swivel and lowerable, loadable in all directions and recessed in the outer frame * 13.4 tons in the corners, otherwise 10 tons ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope), * Widening boards placed in the middle of the loading area ----Ramps: Gsdpfxsl Th I Ae Anqskb * Hot-dip galvanized, one-piece hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable on the side * 4-way control block for retrofitting of the hydraulic side ramp adjustment ----Loading Area: * above the turntable: approx. 1,960 x 2,520 mm & unladen approx. 1,070 mm * rear loading area: approx. 6,500 x 2,520 mm & unladen approx. 910 mm (incl. 860 mm approach angle) ----Tires: * 235/75 R 17.5 twin tires ----Unladen Weight: * approx. 5,980 kg unladen weight ----Painting: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in a black shade ----Information: * Technically possible gross vehicle weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf

Condition: new, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, T3 Profi 30.0: ----Brakes: Gkodpfxjl Tpwyj Anqob * Wabco EBS-E (electronic braking system) * Emergency release system for spring accumulators * Drum brakes ----Axles: * 3 x 11-ton BPW Eco axles ----Suspension: * Air suspension with lift and lower function, controlled by an RtR valve ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking clamp ----Electrical System / Lighting: * TPMS (tire pressure monitoring system) * Smart-Board as an information tool * LED tail lights 12/24 V * Rotating beacon (removable) at the rear * 15-pole power connector ----General Components: * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of closed plastic and rear mudguards made of straight galvanized steel sheet, each with splash protection * Reflective contour strips on the sides and rear * Hinged cover (hot-dip galvanized) for the toolbox in the turntable platform ----Low-loader Platform: * 4 lashing points on each side with simultaneous 2-ton lashing capacity * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope) * Extension boards placed in the center of the loading area * Hydraulic, one-piece ramps (approx. 3,000 x 720 mm) adjustable on the side ----Load Securing (Load Securing Package): * 2 lashing points (6.4 tons) on the front left and right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame – 13.4 tons in the corners, otherwise 10 tons. ----Excavator Arm Rest: * Approximately 2,100 mm long from the rear axle to the end crossmember (2 pairs of 6.4-ton lashing points on the side in the excavator arm rest) ----Loading Area: * Over the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach ramp) ----Loading Height: * Unloaded: approx. 1,070 mm * Loaded: approx. 910 mm ----Tires: * 235/75 R 17.5 ----Paint Finish: * Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized * Axles, turntable, air tank, etc. painted in a black shade ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change * Sample images ----Delivery Time: * Available from approximately week 32/2026

Condition: new, maximum load weight: 30,740 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering device and RtR valve * SmarD on-board system for load weight determination * Warning sign packages front & rear * Reflective contour tape on sides and rear * Removable rotating beacon at the rear * LED lights * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel and spare wheel holder in basket design, mounted on the right side * Enclosed plastic single fenders at the front * Straight steel mudguards at the rear, each with spray suppression (anti-spray system) Gedpfsl Tik Njx Anqekb * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and 3 integrated storage compartments incl. cover, lockable * Chassis made of high-strength fine-grained steel * Floor over turntable platform made of 50 mm softwood, in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of hardwood * 4 stake pockets on each side (no stakes included) with simultaneous 2 t lashing point per pocket * Load securing package consisting of: 2 lashing points 6.4 t at the front left and right on the main frame of the turntable platform * 2 pairs of 13.4 t lashing rings each at the outer frame front and rear, as well as 4 pairs of 10 t lashing rings per side, swiveling and retractable * Loadable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings in the excavator arm rest area * 8 pairs of galvanized swing-out marker boards for 3 m total width (not at the rear slope) * Widening planks stored in a compartment on the left side * Excavator arm rest above rear axle up to end of approach ramp approx. 2,100 x 740 x 190 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically adjustable tip, approx. 4,650 x 720 mm incl. hydraulic lateral ramp shifting and load-holding valve * Loading area across the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, turntable, access ramps, flip-out marker boards and mechanical drop-down supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Condition: new, maximum load weight: 30,080 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T4 RM 40.0: Gsdpfxexmpydj Anqjkb * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * Drum brakes * 4 x 11 ton Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord infotool mounted with pressure sensors for total axle load display per axle group * Side and rear reflective contour tape * Removable LED beacon at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Closed single plastic mudguards at the front * Straight rear steel mud flaps each with spray suppression * Side underrun protection * Front extension in front of turntable platform approx. 520 mm with 45° corners and 3 storage compartments incl. lockable folding lids (open to the rear) * Chassis made of high-strength fine-grain steel * Floor above turntable platform made of 50 mm softwood and 60 mm softwood on low-bed platform * Outer planks of the ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform; one pair each (front & rear) of 13.4 t lashing rings on the outer frame; one pair each side of 10 t swivel and lowerable lashing rings, loadable in all directions and integrated in the outer frame; bolted 5 t lashing rings on the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear); 2 pairs of 6.4 t lashing rings at the sides of the excavator boom cradle * 11 pairs of folding outriggers for a total width of 3 meters (not on rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for widening planks made of sheet steel, mounted transverse to the load area in front of the 1st rear axle * Excavator boom cradle above the rear axle to end of incline approx. 2,300 x 740 x 190 mm * 2 wheel wells per side, approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with sliding cover (storage for covers at the front on the turntable platform) for transporting wheel loaders with 3,100 - 3,640 mm wheelbase * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically deployable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area above fifth wheel: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, turntable, folding outriggers, rear supports, and ramps hot-dip galvanized * Axles, air tanks, and drawbar painted black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to change and prior sale * Immediately available ex Egestorf

Condition: new, maximum load weight: 37,390 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Year of construction: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-up aid for maneuvering purposes engaged on the first axle via EBS (without truck-side installation) * Rear axle as trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle for maneuvering purposes via EBS from the driver's cab (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering device as well as Ride-on-Road (RtR) valve ----Electrics / Lighting: * Smart-Board infotool mounted on the trailer, equipped with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable rear LED beacon * 2 additional LED reversing lights * 7-pin socket on the rear side for overlength lighting * Side marker lights with indicator control * Tire pressure monitoring with in-cab display via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Support winches at the front and swivel supports at the rear on the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead cross member (without spare wheel) * Mechanically adjustable warning sign sets at the front and rear * Swivel arm as carrier for connection lines from truck to semi-trailer ----Low Loader Deck: * 2nd king pin position * Fifth wheel platform with front corners chamfered at 45° and front toolbox made of galvanized, powder-coated sheet steel, W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high drop-side aluminum boards (RAL color of choice) on the sides of the fifth wheel platform, foldable and removable * Rear board inserted 150 mm high * Rear slope on the fifth wheel platform leading to the drop deck approximately 700 mm long with chequer plate covering, and at the end, a perforated strip for attaching aluminum loading ramps * Fifth wheel platform with 50 mm clamped timber planks and drop deck platform with 60 mm clamped timber planks * Chequer plate above the axles * 9 mechanical folding deck wideners up to 3 m overall width, except on the rear slope (widening planks included, stored in a transverse compartment underneath the loading area) * 3 mounting recesses under the fifth wheel platform for storing either aluminum loading ramps or timber planks for wheel recess covers Gksdpeq Euakefx Anqeb ----Load Securing (LaSi Package): Fifth Wheel Platform: * Perforated outer frame, angled 45°, with hole pattern for lashings (2 t lashing capacity per lashing point at a minimum spacing of 480 mm) * 3 x 13.4 t recessed lashing rings per side in the floor (1 x on the fifth wheel platform, 1 x on the longitudinal members after the step, and 1 x above the middle axle next to the longitudinal member) Drop Deck Platform: * 3 x 13.4 t lashing rings per side on outer frame (1 x at the start of the fifth wheel platform step, 1 x at the start of the access slope, 1 x at the end of the access slope) * 2 x 10 t lashing rings per side (1 x between front wheel recess and 1st axle, 1 x between 2nd and 3rd axle) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front and 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last rigid axle, over the steering axle, up to the end crossmember, continuous with internal reinforcement profile approx. W = 770 mm x rear d