Used Fliegl Special Purpose Trailers for sale (333)

Condition: used, maximum load weight: 6,580 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 11/2020, next inspection (TÜV): 03/2027, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 2,400 mm, total width: 2,550 mm, total height: 3,700 mm, ° Central axle trailer ° Chassis manufacturer: FLIEGL ° Curtain body with hoops ° Doors at front and rear (through-loader) ° 2 locks per door Crodoz Nbpgjpfx Aafsi ° Sliding curtain on both sides ° Sliding roof ° 3-part aluminium slats ° Pallet stop rails ° Tyres: 235/75R17.5 143J ° Height-adjustable drawbar ° Reinforced cargo floor ° Lift/lower function ° Coupling heads red and yellow ° 24 Volt 15-pin lighting plug ° EBS connector ° Vehicle has normal signs of use

Condition: new, maximum load weight: 17,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,670 mm, loading space width: 2,500 mm, loading space height: 860 mm, total width: 2,520 mm, New vehicle Fliegl 3 axle low loader trailer with ramps, type DTS 300 Vehicle completely hot-dip galvanized Total weight: 24,000kg/30,000kg Empty weight: 6,100kg Payload: 17,900/23,900kg Total length: 10,890mm Loading length: 8,670mm total, 6,500mm low bed including rear bevel / 2,170mm offset Width: 2,520mm Loading height: 860mm Further information plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 ¤/ net Rent-purchase offer: term 48 months, down payment only VAT, residual value 40% monthly rate: EUR 569.00 Steel Welded construction Pivot bolster with strong ball bearing ring Foldable rear support Wheel chocks with holder Aluminum side impact protection Splash flaps at the rear over the entire width (not in conjunction with forklift bracket) Half-shell mudguard on 1st axle with anti-spray splash flaps Anti-spray splash flaps behind 2nd and 3rd axles 1 plastic tool box, w=600 / h=425 / d=460 mm, lockable Extensions extendable to 3,000 mm (not in the rear bevel) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes for low loader 1 pair of lashing cutouts in the longitudinal beam at the front on a bend, 10 tonnes each. 4 pairs of lashing holes in the outer frame of the crank, each with 5 tons (tension belt attachment) 7 pairs of lashing mushrooms, set into the outer frame at the top and side, each with 10 tons 1 x at the front on the crank 6 x in the low bed First lashing eye 250 mm from the front and last max. 250 mm from the back, distance between the lashing eyes not greater than 1100 mm 5 pairs of ring lashing eyes set into the outer frame, each with 5 tons (can be converted to stake pockets) 2 additional pairs of folding lashing eyes, each with 10 tons 1 x on the crank (protrudes) 1 x set into the ground behind the last axle Towbar with tested 40 mm towbar Towbar height adjustment via spring Axles + suspension Drum brake axles, as selected by the manufacturer "Laser-measured axle/chassis" Reduction in tire wear and tear Fuel consumption Air suspension with raising and lowering valve Wheels and tires 235 / 75 R 17.5" at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake Vehicle driving stability system Axle load detection via EBS-Canbus signal, for display on display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) 2 interchangeable coupling heads at the front, with connecting cables to the motor vehicle, 24 volt EBS, electronic braking system with EBS plug at the front, with connecting cable Codpfx Aaov D T R Esfori Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red lane keeping lights at the rear 2 x 7-pin, interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (light removable) 2 pairs of warning signs with double LED lighting and extendable to 3,000 mm Floor Front bend with steel/checker plate covering Storage box embedded in the crossing slope to the bend then with approx. 70 mm softwood floor, steel/checker plate covering in the wheel arch area Rear bev

Condition: used, machine/vehicle number: WFDFLT21801005232, empty load weight: 2,650 kg, maximum load weight: 15,350 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 50 %, color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation. Fliegl ZWP 180 Standard – Specifications #Chassis – Swap Body Turntable Trailer Fine-grain steel welded chassis Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers 4 container twist locks with heavy-duty outriggers on a 20' base Suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Aluminium side underrun protection Steel rear underrun protection Quarter fenders at the front and half fenders at the rear Without rear impact protection #Drawbar Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles & Suspension SAF disc brake axles Air suspension #Braking System Dual-line air brake system Spring parking brake Two colour-coded front coupling heads with connecting lines to the tractor unit Electronic Braking System (EBS) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality Raise/lower valve with holding function in both raised and lowered positions #Wheels & Tyres 385/65 R22.5 tyres (manufacturer's choice) Steel wheels, factory silver finish #Electrical System 24 V electrical system Multi-chamber lighting Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights Cjdpfx Aozldqhsafori 2 × 7-pin front connectors with connecting cables Additional LED work light at the rear, activated via the reverse light #Registration & Certification Approved for registration in Germany DEKRA inspection and certification 24/7 service hotline Prepared for single-line licence plate holder ECE R48 contour markings with white reflective tape on the sides and red reflective tape at the rear

Condition: used, functionality: unexamined, empty load weight: 11,900 kg, overall weight: 47,000 kg, axle configuration: 3 axles, first registration: 06/2013, total length: 13,730 mm, total width: 2,550 mm, color: yellow, Year of construction: 2013, Equipment: tail-lift, 3-axle semi-trailer with a tarpaulin cover and a hydraulic loading ramp. Csdpfx Aoz N Ddzeafjri

Condition: used, overall weight: 12,000 kg, axle configuration: 2 axles, first registration: 10/1998, Equipment: ABS, Fliegl TPW 180 BDF interchangeable chassis, SAF axles Internal number for inquiries: 1026878 Crsdpfxs Aat T Se Aafoi * Condition: very good * Year of manufacture: 1998 * ABS * EBS * SAF axles * 2-axle, air-suspended * Underrun protection, aluminum Tires: * Front axle: 385 / 65 R 22.5, air-suspended / 70% * Rear axle: 385 / 65 R 22.5, air-suspended / 70% ----Price: EUR 4,900 + 19% VAT For further questions, you can reach us on the following telephone numbers: We speak: German, English, French, and...? Typographical errors, errors and prior sale excepted.

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/2014, loading space length: 13,660 mm, loading space width: 2,470 mm, loading space height: 2,810 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 50 %, wheelbase: 9,000 mm, color: other, Equipment: ABS, = Additional options and accessories = - Air Suspension - BPW Axles - Disc brakes Csdpfx Aae Ah Tlcsferi - Lift Axle = More information = General information Year of construction: 2014 Registration number: ON-68-FS Axle configuration Tyre size: 385/65 Make axles: BPW Brakes: disc brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg; Tyre profile: 50% Rear axle 2: Max. axle load: 9000 kg; Tyre profile: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile: 40% Weights Empty weight: 5.880 kg Carrying capacity: 33.120 kg GVW: 39.000 kg Maintenance APK (MOT): tested until 03/2027

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,740 kg, maximum load weight: 14,260 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total length: 9,430 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: original, Custom Transport Solution Configure your Fliegl trailer to your individual requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Attention: Archive pictures are used! Chassis Heavy-duty welded steel low-loader turntable trailer chassis Heavy-duty turntable with ball-bearing race Integrated storage box in turntable front section Folding rear support Wheel chocks with holders Aluminium side underrun protection Full-width rear mud flap Semi-circular mudguards on 1st axle with anti-spray mud flaps Anti-spray mud flaps behind 2nd axle Spare wheel carrier incl. spare wheel (steel rim) Lockable plastic toolbox with shelf (padlock not included) Lashing Equipment 3 pairs of integrated 10 t lashing points at the front 5 pairs of recessed 10 t lashing mushrooms on top and sides of the outer frame Additional 5 t recessed lashing rings instead of stake pockets Maximum spacing between lashing points: 1,200 mm Drawbar Height-adjustable drawbar with certified 40 mm towing eye, angled by 8° Axles & Suspension SAF drum brake axles Laser-aligned axle and suspension geometry for reduced tyre wear and fuel consumption Maintenance-free parabolic spring suspension with steel-rubber bushings Wheels & Tyres 235/75 R17.5 tyres Twin steel wheels, factory silver finish Braking System Dual-line air brake system Spring parking brake Two anti-mix coupling heads with air lines to towing vehicle ABS & ALB with front ABS connector and connection cable Compatible only with towing vehicles supporting ABS functionality Electrical System 24 V lighting system Multi-chamber rear lights Yellow LED side marker lights 2 white front position lights 2 red/white rear outline marker lights 2 × 7-pin front connectors with connection cables Loading Platform Steel deck in front section 70 mm softwood flooring Steel chequer plate over wheel arches Rear beavertail with 70 mm timber flooring Total low-bed loading area incl. beavertail: approx. 7,200 mm Loading Ramps 2 steel loading ramps Length: 2,800 mm Width: 750 mm Side-adjustable Timber-covered Spring-assisted lifting Foldable lower ramp locks to prevent lateral movement Operating Notes A special permit is required for 10,000 kg axle load (approval must be obtained individually in each German federal state). Cjdpfx Aaszl R S Ssfori The stated gross vehicle weight is technically possible; depending on the cargo, the maximum permissible weight may not be achievable while complying with legal axle, kingpin and support loads. Registration Registration: Germany EC type approval (2007/46/EC) 24/7 service hotline Prepared for two-line licence plate holder ECE R48 reflective contour marking (white sides, red rear) ECE 70 rear warning plate

Condition: used, functionality: fully functional, overall weight: 40,000 kg, axle configuration: 3 axles, suspension: air, tire condition: 80 %, Year of construction: 2015, The dump body is used, in good condition, and has seen little use. Further details: - 1 lift axle - Air suspension Cjdpfx Ao Af Uufeafsri - Disc brakes - Retarder - Aluminum rims

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,995 kg, maximum load weight: 16,005 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 6,500 mm, loading space width: 2,520 mm, total length: 8,450 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis: Center-Axle Trailer Fine-grained steel welded construction 2-speed gear-supported landing leg at the front Folding rear support 2 jockey legs with holder Crodpfx Ajzcvt Rsafoi Aluminum side impact protection Splash flaps at the rear, spanning the entire width Quarter panel fenders in front of and behind each axle with anti-spray splash flaps according to EC regulations 1 aluminum storage box with stainless steel flap Container locking mechanism, 1 pair of recessed locking recesses in the floor for 1 x 20 ft container, 1 pair of container locking adapters Extendable widening sections to 3,000 mm Storage compartment for wooden planks in the center + wooden planks 70 mm for widening to 3000 mm Tie-down points, low-bed trailer 1 pair of tie-down brackets additionally at the front in the front cross member, 10 tons each 5 pairs of ring tie-down points recessed in the outer frame, 5 tons each (can be converted to stake pockets) 7 pairs of tie-down cleats recessed on top and on the side in the outer frame, 10 tons each Coupling system, center-axle trailer Drawbar with tested 50 mm tow hitch Axles + Suspension Drum brake axles, according to the manufacturer's choice "Axle/chassis laser aligned" reduces tire wear and fuel consumption Axle distance 1810 mm Air suspension Braking system 2-line compressed air braking system Color-coded line routing for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Parking sockets for ABS/EBS and air connection on the drawbar or drawbar 24 Volt EBS, electronic braking system with EBS connector at the front with lift and lower valve Vehicle - driving stability system Axle load recognition via EBS-CAN bus signal, for display on the display in the cab "TPMS" Tire Pressure Monitoring System according to ECE R 141, display on the display in the towing vehicle, via EBS Wheels and Tires 235/75 R17.5, manufacturer's choice Protective caps for wheel studs Electrical System 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED Yellow LED lighting on the side, coupled with the turn signal "Flashing side marker lights" Premium LED side marker lights, with "20 LED diodes per light" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole fail-safe plugs at the front, with connection cable Parking sockets for electrical system on the drawbar LED work lights on both sides 2 additional LED work lights at the rear 1 LED rotating beacon with holder, switched via sidelights 2 pairs of warning signs, double LED illuminated and extendable to 3,000 mm Floor thereafter with approx. 70 mm soft wood flooring, in the wheel arch area steel/diamond plate flooring Rear inclination with "Mega Grip surface" made of interlocking grating Low-bed area including rear inclination 6,500 mm Front panel / corner posts Aluminum profile, approx. 400 mm high, plug-in Ramps Steel ramps 2,800 mm long, 750 mm wide, laterally movable Ramp surface with "Mega Grip" made of interlocking grating Hydraulically operated via towing vehicle auxiliary drive with throttle, operation on the left side Hydraulic side displacement of the ramps, individually controllable Hydraulic connection with quick-release cou

Condition: used, empty load weight: 5,933 kg, maximum load weight: 29,067 kg, overall weight: 35,000 kg, axle configuration: 3 axles, Condition - Very well-maintained vehicle from first owner Category - Semi-trailer Model - FLIEGL DHKA 350 - 35,000 kg Registration Month - 02 Registration Year - 2013 Gross weight (kg) – 35,000 Unladen weight (kg) – 5,933 Payload (kg) – 29,067 Colour - Silver Number of axles - 3 Maintenance - Inspection record Commercial/Export - Net price in € - 19,990 Subject to prior sale, changes, and errors Phone +49 551 50 84 912 According to manufacturer: Axles and Suspension SAF disc brake axles with 370 mm disc diameter; air suspension with raise/lower function; 1st axle is an automatic lift axle, includes forced lowering and starting aid, actuation by 'brake 3x' (starting aid is operational up to axle load exceedance of 30% and up to a maximum speed of 25 km/h) Chassis Special lightweight steel welded construction; fifth wheel plate with replaceable 2” kingpin Support legs Not equipped Crjdswk Ux Nepfx Aafji Tyres/Wheels 385 / 65 R 22.5”, manufacturer’s choice; polished aluminium rims, manufacturer’s choice Braking system 2-line brake system per EC regulation; EBS; 2 non-interchangeable coupling heads; spring-actuated parking brake; without connecting cable Electrics 24 Volt, multi-chamber rear lights; 2 x 7-pin non-interchangeable sockets; lighting per EC regulation; without connecting cable Hydraulics Low-pressure cylinder max. 170 bar with HDK threaded coupling; fixed section, NW 48 mm (without hose connection) Body Aluminium floor made of high-quality, abrasion-resistant material, 5 mm thick, Brinell 110, reinforced with U-profiles; side walls in hollow chamber profiles, precisely welded, with upper rail profile for bulk material shedding; front wall slanted, rear wall as pendulum tailgate with double-joint hinge, exterior mounting with double hook lock. Note! Suitable only for the transport of sand, gravel, and rolled chippings with a maximum grain size of up to 20 mm! All other transported goods are excluded from warranty! Paintwork Chassis shot-blasted, primed, and final coat single colour 2K/HS acrylic paint in DB Novagrau; body RAL 9010 pure white with 'Revolution' lettering Miscellaneous Foldable underrun bar; wheel chocks with holder; 1/2 shell plastic mudguards; with Dekra inspection and certificate (per §13 EC FGV); contour marking with reflective tape per ECE R 048, side in white, rear in red; shovel and broom holder mounted on front wall

Condition: new, maximum load weight: 23,890 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Vehicle from current production NEW VEHICLE Fliegl 3-axle low-loader, type DTS 300, hot-dip galvanized Total weight 24,000 kg / 30,000 kg Payload 17,890 kg / 23,890 kg Unladen weight 6,080 kg Overall length 10,900 mm Loading length 8,680 mm Loading bed 6,500 mm incl. 900 mm approach ramp Loading height 860 mm Air suspension with raising and lowering valve Long ramps 2,800 mm with hydraulic operation Extensions to 3,000 mm with warning signs and rotating beacon Cedpfx Aok N Adkoafjri Large lashing kit with 5.0 and 10.0 ton lashing points 5 pairs of stake pockets Drawbar eye 40 mm plus pre-carriage / preparation costs from storage location Wiesmoor 1,280.00 € / net Lease-purchase offer: Term 48 months, residual value 40%, down payment only the VAT. Monthly rate: EUR 609.00

Condition: used, maximum load weight: 6,740 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 05/2015, next inspection (TÜV): 10/2025, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 2,950 mm, loading space volume: 47 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Internal number: 3372 ----Phone & WhatsApp: ----Fliegl TKF 118 tandem trailer, SDAH tarpaulin and side rails, sliding curtain, rear portal doors, permissible gross weight: 10,000 kg, technically possible: 11,800 kg, payload: 6,740 kg / 8,540 kg. First owner. TÜV (technical inspection): 10/2025. ----ABS/EBS, air suspension, height-adjustable drawbar, tires: 235/75 R17.5, tire condition: 20-30%, Duomatic coupling, rear portal doors, aluminum outriggers, loading height approx. 850 mm. ---- * We sell exclusively subject to our General Terms and Conditions. Credpfx Aoz Hzpujafei * We assume no liability for errors in the vehicle description. * The vehicle may be covered with or have advertising affixed. * We sell used spare parts for DB and MAN, such as engines, transmissions, axles, cabs, and bodies. Cranes, hooklifts, etc. For detailed information, please contact us by phone or at:

Condition: new, maximum load weight: 8,840 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 900 mm, total width: 2,550 mm, New Fliegl tandem low-loader with ramps type TPS 118 Chassis fully hot-dip galvanized - side walls aluminum Vehicle from current production - Delivery time approx. two weeks Gross weight: 11,800 kg Unladen weight: 2,960 kg Payload: 8,840 kg Overall length: 8,000 mm Loading length: 6,200 mm incl. rear slope Width: 2,550 mm Loading height: 900 mm Additional information plus pre-shipping / provision ex stock 26639 Wiesmoor €1,280.00 / net Loading width: 2,480 mm Chassis: central axle trailer Fine-grain steel welded construction Outer frame slightly sloped, new version with 'Load-lock profile' for lashing strap hooks 3 pairs of lashing rings on the outside floor, 5 t each 1 x front in the corners, 1 x before and 1 x in rear slope at the back Pair of lashing rings on outside floor/frame, 5 t each Support leg at the front Cjdpfxev E Dqlo Aafsri Folding rear support 2 wheel chocks with holder Aluminum side underrun protection Galvanized steel rear underrun protection Full-width rear mudflap (not in combination with forklift holder) Quarter shell mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Drawbar system central axle trailer Drawbar with certified 40 mm towing eye Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles & suspension GFA axles with tapered roller bearings and S-cam brake 'Axles/chassis laser-measured' Reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load equalization (rocker compensation) Braking system 2-line compressed air braking system Color-coded pipe routing for easy service. Hand spindle parking brake 2 error-proof coupling heads in front, with connection lines to tractor unit, 24 volt ABS and ALB, with ABS plug in front, with connecting cable, Note: The trailer may only be towed by towing vehicles that ensure the ABS function! Wheels and tires 4 x 235/75 R17.5 make at the manufacturer’s choice 4 steel rims, factory silver Electrics 24 volt, multi-chamber lights, side yellow LED lighting 2 white LED positioning lights front 2 white/red marker lights rear 2 x 7-pin error-proof connectors at front, with connection cable, Floor Steel/chequer plate floor for high point load capacity Note: Slight floor warping possible due to welding distortion! Platform length approx. 6,200 mm Rear slope approx. 900 mm Front bulkhead / corner posts 25 mm aluminum hollow section, 400 mm high, Side walls 25 mm aluminum hollow section, 400 mm high, foldable and removable Central stanchions 1 pair of folding stanchions at side wall height, foldable and removable Rear wall / rear corner posts 1 pair of steel stanchions fixed to the frame with support for ramp locking. Entry width approx. 2,430 mm Ramps 2 steel ramps 2,300 mm long, 510 mm wide, laterally adjustable with hand grip on the ramps covered with wood (tipped with steel/chequer plate) with gas spring assist for single-person operation Painting Frame hot-dip galvanized including passivation '15-year warranty against rust-through' Front bulkhead RAL 9006 white aluminum Side wall RAL 9006 white aluminum Ramps hot-dip galvanized Lease-purchase offer: Term 48 months, down payment only VAT, final residual value 40%, monthly rate EUR 350.00

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 1,850 kg, maximum load weight: 8,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 3,100 mm, loading space width: 1,740 mm, total length: 4,900 mm, total width: 2,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Tandem Low-Bed Trailer for Skip Containers * High-tensile steel welded chassis construction * 1 pair of adjustable and removable skip container locking wedges * 1 pair positioned in front of the container * Lashing rails for skip containers on both sides of the body * Front jockey wheel * Steel mudguards covering both wheels * Aluminium side underrun protection * 2 wheel chocks with holders * Recessed rear storage compartment integrated into the floor, approx. 650 × 240 × 240 mm (W × L × D), with slightly raised lid ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * 2 Euro axles (manufacturer's choice) with tapered roller bearings and S-cam drum brakes * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Parabolic leaf suspension with maintenance-free steel-rubber bushings and mechanical load equalisation (walking beam system) ### Wheels & Tyres * 235/75 R 17.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * 24 V ABS and automatic load-dependent braking (ALB), with front ABS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 × 7-pin non-interchangeable front connectors with connecting cable ### Low-Bed Body (TTS) * Low-profile steel well body Crsdpfx Aozhfzgjafji * Steel floor plate * Steel side walls fully welded to the floor for maximum durability Note: Minor floor distortion caused by the welding process is technically normal. ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis painted in customer's colour * Drawbar painted to match the chassis --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,300 kg, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,900 mm, loading space width: 2,480 mm, loading space height: 2,740 mm, total length: 8,685 mm, total width: 2,550 mm, total height: 3,970 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Chassis: Center axle trailer Fine-grained steel welded construction Outer frame slightly angled with "Load-Lock profile" for attaching tie-down straps. Note: To attach the straps, the side panels must be opened! "Vario-Lash" lashing rings for use in the "Load-Lock profile", 2.5 tons each, loose Gear-supported front legs, with a straight lower part and single-sided operation on the right Telescopic rear support Retractable ladder at the rear Door latch on the side Chocks with holder Aluminum side impact protection Steel underrun protection Quarter panel fenders in front of and behind each axle Rear impact protection Plastic toolbox with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock Coupling device for center axle trailer, according to customer requirements Axles + Suspension Credpfxozcqh Ns Aafoi SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system, color-coded lines for easy maintenance Spring-loaded parking brake Duomatic connection at the front, with connection line to the towing vehicle EBS, electronic braking system with EBS plug at the front, with connection cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle – driving stability system Wheels and tires 385/65 R22.5", manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 1 x 15-pole plug at the front, with connection cable Floor Sieve-printed panels, approx. 30 mm thick, for high point load capacity Platform length approx. 6,900 mm Front bulkhead / corner posts at the front 2,580 mm high, steel corner posts in a full-volume design, release mechanism for side tarpaulin on the front bulkhead Center posts Sliding posts, can be moved along the entire length, with 4-fold insertion pockets and a long pocket at the bottom Insertion slats Rows of aluminum V-insertion slats Rear bulkhead / corner posts at the rear Rear corner posts, steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioner Rear portal doors, 2-wing, each with 2 internal rotating bar locks Tarpaulin Tarpaulin with welded horizontal and vertical straps Tensioners made of stainless steel Customer lettering on side tarpaulins and rear portal possible Roof Fixed roof with tarpaulin and bows, tarpaulin color: white Optimal rain gutter at the rear, at the top of the end bow, above the doors Registration country / signs Germany with Dekra inspection and certificate (according to §13 EG - FGV) Load securing certificate according to EN 12642 XL 24/7 service hotline prepared for license plate holder, single row Reflective strips: white, continuously on the side tarpaulin at the bottom and at the top in the corners (if visible side panels, then the strip at the bottom, on the side panels) Reflective strips: red, around the rear portal *also available as a drive-through version Customized transport solution

Condition: used, overall weight: 18,000 kg, first registration: 09/2019, loading space length: 7,000 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, - Twin tyres - Mega, - 3 m internal height - side loading Crsdoxxxltepfx Aafoi

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,470 mm, total width: 2,550 mm, total height: 1,040 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with swivel turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 1 pair of removable guide rollers, additional 4 container locks with sturdy 20"-based arms for swap bodies 7.15 and 7.45 Swivel frame with heavy-duty ball bearing swivel ring Wheel chocks with holder Aluminum side impact protection Side impact protection set inward for optimal clearance to the swap body supports Steel underrun protection Underrun protection shortened for optimal clearance to the swap body supports; lighting system mounted in a protected position Rear mud flaps across the entire width (not compatible with forklift mount) Quarter-shell front fenders and half-shell rear fenders *Towing equipment for trailer turntable Towing fork with certified 40 mm tow eye Towing fork mechanically adjustable in length by approx. 6 x 100 mm (approx. 1900–2500 mm), towing fork length set to 2200 mm *Axles + Suspension BPW or SAF drum brake axles, at the manufacturer’s discretion Cjdpfx Aozfp Uxjaferi “Laser-aligned axles/chassis” to reduce tire wear and fuel consumption Air suspension *Brake System 2-line compressed air brake system Color-coded piping for easy maintenance. Air reservoir: 180 liters Spring-loaded parking brake 2 non-reversible coupling heads at the front, with connecting lines to the tractor unit, EBS, Electronic Braking System with EBS connector at the front, with connecting cable, Caution: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! With lift/lower valve, hold function in both lower and lift positions Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly *Wheels and Tires 235/75 R17.5, brand selected by the manufacturer Steel rims in twin configuration, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting linked to the turn signals (“flashing side lights”), LED license plate lighting (Note: With certain towing vehicles, false diagnostics may occur even though the function is working properly) 2 white LED front position lights 2 white/red LED rear lane-keeping lights 2 x 7-pin reverse-polarity-protected connectors at the front, with connecting cable, LED work lights on both sides (activated via reverse light) 2 additional LED work lights at the rear, activated by the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated by the reverse light *Country of Registration / License Plates Germany With DEKRA inspection and certification (in accordance with §13 EG - FGV) 24/7 Service Hotline Prepared for single-line license plate holders Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Hot-dip galvanized frame, including passivation “15-year warranty against rust-through” Drawbar: galvanized or black, at the manufacturer’s discretion Customized transport solution

Condition: new, maximum load weight: 15,080 kg, overall weight: 21,000 kg, axle configuration: 1 axle, NEW VEHICLE Fliegl 1-axle special low-bed trailer Total weight 21,000 kg Payload 15,080 kg Unladen weight 5,920 kg Overall length 13,630 mm Loading length 9,940 mm Low-bed, sloping from the wheel area to a loading height of 210 mm Attachment rail for aluminum ramps at the rear of the vehicle, spanning the full width Crodpfxsllwits Aafji Towing eye at the rear Electric winch with a pulling force of 8,165 kg and remote control, cable length 35 meters 1 pair of wheel recesses approx. 700 mm behind the gooseneck, integrated into the floor 2 pairs of plug-in wheel stops, 4 plug-in positions Large lashing kit BPW drum brake axle Air suspension with lifting and lowering valve Complete LED lighting 1 pair of aluminum loading ramps, load capacity 12,000 kg, storage compartment in the center of the loading area Frame hot-dip galvanized, outer frame painted red Plus pre-carriage / preparation costs from storage location Wiesmoor 1,280.00 EUR / net New vehicle without initial registration, with full manufacturer's warranty Vehicle is immediately available Lease-purchase offer: Term 48 months, residual value 40%, down payment only the VAT Monthly rate EUR 899.00 (other terms are possible)

Condition: new, empty load weight: 3,020 kg, maximum load weight: 8,640 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,950 mm, suspension: other, color: white, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, - Fliegl three-sided tipping trailer, type TSK 118, new vehicle, delivery time on request - Aluminum ramps optional, 1,800 EUR net - Price with ramps: 22,700 EUR plus VAT - Factory new - Frame hot-dip galvanized - Permissible total weight: 11,800 kg - Unladen weight: 3,160 kg - Payload: 8,640 kg - Overall length: 6,950 mm - Overall width: 2,550 mm - Platform dimensions: L 5,000 mm, W 2,420 mm, loading height: 950 mm - Steel welded construction - Support leg at the front - Folding rear support (aluminum ramps optional, 1,800 EUR net) - Underrun protection, steel - Continuous mud flaps at the rear - Lockable storage compartment for loading ramps below the loading platform - Towing eye, 40 mm - Drawbar, height-adjustable - BPW axles - "Chassis laser-aligned" to reduce tire wear and fuel consumption - Parabolic suspension with maintenance-free steel-rubber mounts and mechanical axle load equalization - 235/75R17.5 tires - 2-line pneumatic braking system, manual parking brake - ABS and ALB - Stable tipping platform with 4 mm steel sheet floor - Side walls foldable and pivoting with central locking - Corner posts at the rear, plug-in type - Rear wall foldable and supported with central locking - 5 pairs of lashing points in the floor, each 5 tons - Contour marking with reflective strips - Frame hot-dip galvanized, 15-year warranty against rust - Platform color: RAL 9010 pure white - Errors and prior sale excepted! - More information, additional XXL pictures, directions, can be found on our website at: ... VAT can be shown, ABS, new, very good condition, HSN 7951, TSN 000, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban) Credpszv Nrlsfx Aafei

Condition: new, empty load weight: 2,810 kg, maximum load weight: 8,990 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,500 mm, total length: 8,120 mm, suspension: other, color: grey, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, - FLIEGL Tandem platform trailer TPS 118 with angled rear and ramps - New vehicle, delivery time upon request - Price: 21,900 EUR plus VAT - Fine-grained steel welded construction, hot-dip galvanized - 6 pairs of lashing eyes in the floor, each rated at 5 tons - Storage box - BPW drum brake axles - Parabolic suspension with maintenance-free steel/rubber/bearing system - 235/75R17.5 tires - Permissible total weight: 11,800 kg, unladen weight: 2,810 kg - Payload: 8,990 kg - Overall length: 8,080 mm, overall width: 2,550 mm - Internal platform dimensions: L 6,200 x W 2,550 - Loading height: 910 mm - Coupling height: 700 to 950 mm - Steel corrugated floor, hot-dip galvanized - Rear angle of approx. 900 mm - Aluminum front and side panels, 400 mm high - Center and corner posts removable - Steel ramps with wooden covering, L 2,300 x 510 mm, laterally adjustable - Gas spring supports for single-person operation - Reflective strips according to ECE R048, white on the sides, red at the rear - Axle and frame painted in DB7350 Novagrau - 10-year warranty against rust - Errors and prior sales excepted! - More information and additional photos on our website: Csdpfx Aaszv Nrfsfjri ... VAT can be shown, ABS, new, HSN 7951, consumption: 0.0/0.0/0.0 l/100 km (combined/urban/extra-urban)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Trailer for Roll-Off Containers * High-tensile steel welded chassis construction * Sliding frame system: * The container is loaded from the rear onto the sliding frame and pushed forward * Front container stop adjustable for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for the transport of roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Rear impact protection, mounted vertically on left and right side, with delta rubber buffers on underrun protection brackets * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: opening the container locking system automatically activates the spring-loaded parking brake * Vehicle Stability Control System * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 additional LED work lights at the rear, activated via reverse gear * 2 x 7-pin non-interchangeable front plugs with connecting cable ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) Customized Transport Solution Codpjzggghjfx Aafori Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, maximum load weight: 8,840 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 900 mm, total width: 2,550 mm, Total length: 8,000 mm Loading length: 6,200 mm including rear chamfer Further information plus freight / provision from stock location 26639 Wiesmoor €1,280.00 net Loading width: 2,480 mm Chassis: central axle trailer Fine-grain steel welded construction Outer frame, slightly angled, new version with “Load-Lock profile” for lashing strap attachment Pair of lashing rings on the outside base, each 5 t 1 x in the front corners, 1 x in front of and 1 x in the rear chamfer at the back 6 pairs of lashing rings on the outer floor/frame, each 5 t Gear support leg at the front Rear support, foldable Wheel chocks with holder Aluminum side underrun protection Galvanized steel rear underrun guard Full-width rear spray flaps (not in conjunction with forklift mount) Quarter-circle mudguards 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Towing device for central axle trailer Drawbar with tested 40 mm towing eye Drawbar height-adjustable via spindle, max. adjustment range 300 mm Axles & suspension GFA or BPW axles according to manufacturer’s choice, with tapered roller bearings and S-cam brakes "Axle/chassis laser alignment" reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber mounting and mechanical axle load equalizing (rocker equalizer) Braking system 2-line compressed-air braking system Color-coded piping for easy service Hand-spindle parking brake 2 non-interchangeable coupling heads at the front, with connection lines to the towing vehicle 24 volt ABS and ALB, with ABS plug at the front, with connection cable Attention: The trailer may only be towed by towing vehicles that guarantee proper functioning of the ABS! Wheels and Tires 235/75 R17.5, make as per manufacturer’s choice Steel rims, factory silver Crodpfoyl E Dqsx Aafsi Electrics 24 volt, multi-chamber lamps, side yellow LED lighting 2 white position lamps at the front (LED) 2 white/red marker lamps at the rear 2 x 7-pin non-interchangeable plugs at the front, with connection cable Floor Steel/chequer plate floor for high point load capacity Note: Slight floor waviness due to welding distortion possible! Platform length approx. 6,200 mm Rear chamfer approx. 900 mm Front bulkhead / corner stakes 25 mm aluminum hollow section, 400 mm high Side walls 25 mm aluminum hollow section, 400 mm high, foldable and removable Intermediate posts Without intermediate posts Rear wall / rear corner posts 1 pair of steel posts attached to the frame, with holder to lock the loading ramps, entry width approx. 2,430 mm Loading ramps Steel ramps, 2,300 mm long, 510 mm wide, laterally adjustable With carrying handle on the ramps With wooden covering (tip area with steel/chequer plate) With gas strut for single-person operation Operating Notes The specified gross weight is technically feasible; depending on the cargo, the gross weight may not be achievable while adhering to permissible axle, support, and kingpin loads. (Poor driving and tracking properties possible with incorrect load distribution) Country of registration / plates Germany With Dekra inspection and certificate (according to §13 EC - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips as per ECE R 048, white at the sides, red at the rear Paintwork Frame: DB 7350 Novagrau Front bulkhead: aluminum Side walls: aluminum, anodized Loading ramps: hot-dip galvanized

Condition: used, axle configuration: 3 axles, first registration: 12/2019, Fliegl light container chassis + Singamas tank with measuring device, SAF lift axle Everything at a glance: · First registration: 30.12.2019 · Year of manufacture: 2019 · Color: Red · Tare weight: 3,580 kg · Tires: 385/65 R 22.5 · Note: 1 unit available immediately Special equipment: · Light container chassis for: 1x20 ft container in the center + 1x 30 ft container at the rear · SAF axles · Lift axle · 2 pcs. plastic hose pipes · ADR plate · EBS · ABS · Outline marking · 1 set of wheel chocks · Aluminum side impact protection · 1x15-pole electrical connection. Singamas 26-liter tank · DEZIDATA measuring device · Stainless steel box Standard equipment: · 3-axle · Disc brakes 430mm, lift and lower valve Errors, typos and prior sale excepted. The seller reserves the right to withdraw from the sale. Copyright: All texts, images and videos in this advertisement are subject to copyright by STARENT Truck & Trailer GmbH. Use, reproduction or distribution – even in excerpt – is not permitted without express written consent. _____ Internal number for inquiries: TR26283 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Contact for sales: Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: WhatsApp t: @: Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / WhatsApp t: -104 @: Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / WhatsApp t: -123 @: We speak 13 languages. Probably yours too. Contact us! Homepage: / Facebook: / Instagram: / Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks and vans. Contact for purchasing: Michael Doblhofer (German, English) p: WhatsApp t: -102 @: Crodpfx Aaez N N Ncsfji

Condition: good (used), axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 10/2011, loading space length: 12,450 mm, loading space width: 2,470 mm, loading space height: 2,280 mm, total length: 12,550 mm, total width: 2,550 mm, suspension: air, wheelbase: 8,770 mm, color: red, General information Year of construction: 2011 Registration number: OL-52-LX Axle configuration Cedsvpvygjpfx Aafori Make axles: BPW Rear axle 1: Lift axle; Max. axle load: 10000 kg; Tyre profile left: 40%; Tyre profile right: 40%; Suspension: air suspension Rear axle 2: Max. axle load: 10000 kg; Steering; Tyre profile left: 40%; Tyre profile right: 40% Weights Empty weight: 6.200 kg Carrying capacity: 28.800 kg GVW: 35.000 kg Functional Wall thickness: 7 mm Condition Technical condition: good Visual appearance: good

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,250 kg, maximum load weight: 14,750 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 10,020 mm, total width: 2,550 mm, total height: 1,250 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. *Chassis with central-axle trailer Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy 20"-based arms for 7.15 m, 7.45 m, and 7.82 m swap bodies (Note: When used in combination with the impact guard, the guard protrudes beyond the 7.15 m swap body) 1 pair of front transmission support legs, with straight lower section and single-side operation on the right rear 1 pair of transmission support legs at the rear, with straight lower section and single-side operation on the right side 2 wheel chocks with holders Aluminum side impact protection Side impact protection set inward, for optimal clearance to the swap body supports Steel underrun protection Rear mud flaps across the entire width Half-shell fenders Mud flaps *Towing Equipment for Central-Axle Trailers Towing beam with certified 50 mm tow eye, freight carrier version Crjdpfx Aezd Udcsafei Flat flange plate for tractors with a clearance-type low-bed trailer, connected to the towing beam at the top and bottom Towing beam clamped/bolted, easily replaceable, and partially adjustable in length! Lower coupler drawbar, free drawbar length approx. 2200 mm Fold-down bracket with spring assistance on the drawbar, for routing the connection cables to the truck *Axles + Suspension BPW disc brake axles “Laser-measured axles/chassis” reduces tire wear and fuel consumption Air suspension *Brake system 2-line compressed air brake system Color-coded wiring for easy servicing. Air reservoir: 208 liters Air-spring parking brake, Control panel at the rear right Duomatic connection at the front, with connecting line to the tractor unit, connection at the rear right 24-volt EBS, electronic braking system with EBS connector at the front, with connecting cable, connection at the rear right Caution: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lift and lower valve, hold function in both lower and lift positions Vehicle - Vehicle Stability Control System *Wheels and Tires 385/65 R22.5" Manufacturer's choice Steel rims, factory silver *Electrical System 24 volts, multi-chamber lights, yellow LED side lighting Connectors for electrical and air connections on the drawbar 2 white front position lights 2 white/red rear lane-keeping lights 1 x 15-pin connector at the front, with connecting cable, connection at FR-right 2 additional LED work lights, recessed and integrated into the rear, activated via the reverse light 1 LED work light at the front, centered between the cross members, shining toward the rear, activated via the reverse light *Country of Registration/License Plates Germany With DEKRA approval and certification (per §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Warning sign per ECE - 70 Night parking sign front and rear Contour markings with reflective strips in accordance with ECE R 048, white on the sides and red at the rear *Paint finish Frame Hot-dip galvanized or painted according to customer specifications