Used Fliegl Logging Trailers for sale (362)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,816 kg, maximum load weight: 33,184 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Fliegl 45 ft Container Chassis Tailor-Made Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example. Production and equipment are customized to customer specifications. Chassis High-strength fine-grain steel welded chassis Fifth wheel with replaceable 2" kingpin and two kingpin positions Container locking system for: Rear extension retracted: 1 × 20 ft container (flush with rear, reduced kingpin load) Rear extension – Position 1: 1 × 30 ft, 2 × 20 ft, or 1 × 40 ft container with gooseneck tunnel Rear extension – Position 2: 1 × 45 ft container with gooseneck tunnel and rear overhang No rear height adjustment and no folding center supports; containers without a gooseneck tunnel cannot be transported Front locking adapter for securing containers without a tunnel from below, including storage bracket Roller-mounted rear extension with manual crank 24 t two-speed landing gear, single-side operation Dkodpfezlkiwox Ak Tjt Two wheel chocks with holders Aluminium side underrun protection Galvanized steel rear underrun protection Extendable rear underrun protection for 45 ft containers Half-shell mudguards EC-compliant anti-spray mud flaps Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm brake discs Laser-aligned axle and suspension system for reduced tire wear and lower fuel consumption Offset axle spacing for combined transport (GCW up to 44 t) Air suspension Automatic lift axle on the 1st axle with forced lowering and traction aid (activated by braking three times). Traction aid operates up to 30% axle overload and a maximum speed of 25 km/h. Braking System Dual-line pneumatic braking system Color-coded air lines for easier servicing Spring parking brake Two interchangeable coupling heads at the front (without connecting hoses) Electronic Braking System (EBS) with front EBS socket (without connecting cable) Trailer may only be operated with towing vehicles supporting ABS functionality Raise & lower valve Vehicle Stability System (RSS) Axle load monitoring via EBS CAN bus for display in the truck cab (truck preparation required; not a calibrated weighing system) Wheels & Tires 385/55 R22.5 tires, manufacturer's choice Steel wheels, factory silver Electrical System 24 V electrical system Multi-chamber lights with LED tail and brake lights Yellow LED side marker lights (On certain tractor units, diagnostic messages may occur although all lighting functions correctly.) Two white front position lights Two red/white rear outline marker lights Two 7-pin front sockets (without connecting cables) Operating Information When transporting a 45 ft container with a short tunnel, with or without the front extension, the maximum permitted kingpin-to-rear-end dimension and the legal overall vehicle combination length of 16,500 mm are exceeded. The rear underrun protection must be extended manually. A special permit in accordance with §70 StVZO is required. Registration & Approval Registration country: Germany DEKRA approval and inspection certificate (according to §13 EC-FGV) 24/7 service hotline Prepared for single-line license plate holder ECE R48 contour markings (white on the sides, red at the rear) Finish Hot-dip galvanized chassis including passivation 15-year anti-corrosion warranty Landing legs with black coating

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany Dkedpfx Aszlkgcek Tjt With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT21801003760, empty load weight: 4,480 kg, maximum load weight: 13,520 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2014, total length: 10,020 mm, total width: 2,550 mm, tire size: 445/45 R19,5", color: grey, Platform Trailer – Specifications Chassis Fine-grain steel welded construction Dkodpfsni Udzox Ak Tet 1-speed landing leg at the front with straight foot and single-side operation on the right-hand side Wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Half fenders extending slightly beyond the main frame Rear impact buffers Drawbar Tandem trailer drawbar with certified 50 mm towing eye Transport version with under-mounted coupling drawbar Axles & Suspension BPW disc brake axles (manufacturer's choice) Air suspension with raise/lower valve Wheels & Tyres 445/45 R19.5 tyres (manufacturer's choice) Steel wheels, factory silver finish Braking System Dual-line air brake system Spring parking brake Front Duomatic connection with connecting line to the towing vehicle Haldex Electronic Braking System (EBS) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality Loading Platform Platform length: approx. 7,300 mm Phenolic plywood floor Front Wall Aluminium front wall, approx. 1,200 mm high Heavy-duty steel corner posts (volume design) Electrical System 24 V electrical system Multi-chamber lights Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Registration & Certification Country of registration: Germany DEKRA inspection and certification 24/7 service hotline Prepared for single-line licence plate holder ECE R48 contour markings with white reflective strips on the sides and red reflective strips at the rear

Condition: used, machine/vehicle number: WFDFLT21802026297, empty load weight: 2,872 kg, maximum load weight: 15,128 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation! Fliegl ZWP 180 Standard – Specifications Chassis – Swap Body Turntable Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Removable guide rollers at the front and rear Swap Guard – swap body positioning guide, mounted in front of and behind each container locking point 4 container twist locks with heavy-duty outriggers on 20 ft base, suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Wheel chocks with holders Aluminium side underrun protection Side underrun protection positioned further inwards for optimum clearance to swap body support legs Steel rear underrun protection Shortened underrun protection for optimum clearance to swap body support legs Protected installation of the lighting system Quarter fenders at the front and half fenders at the rear Without rear impact protection Spare wheel holder in basket design Plastic toolbox Drawbar Drawbar length: 2,200 mm Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment Axles & Suspension SAF disc brake axles with 430 mm brake discs Laser-measured axles/chassis alignment to reduce tyre wear and fuel consumption Air suspension Braking System Dual-line air brake system Colour-coded brake lines for easier servicing Air reservoir capacity: 208 litres Spring parking brake Two colour-coded front coupling heads with connecting lines to tractor unit EBS electronic braking system with front EBS connector and connecting cable Dkjdpfx Akoi Ri Dze Tst Note: The trailer may only be operated with towing vehicles that ensure ABS functionality Raise/lower valve with holding function in both raised and lowered positions Brake release function via push button on the vehicle next to the raise/lower valve, allowing brake release when coupled (EBS power supply must be ensured) Electrical System 24 V electrical system Multi-chamber lights Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Additional LED work light at the rear, activated via reverse light LED work light mounted centrally between the chassis beams at the front, illuminating to the rear, activated via reverse light Registration & Equipment Country of registration: Germany DEKRA inspection and approval according to §13 EG-FGV Prepared for single-line licence plate holder Warning board according to ECE R70 Foldable ADR warning board at the rear ECE R48 contour marking with white reflective strips on the sides and red reflective strips at the rear Attention: The pictures shown are archive images. The vehicle may still be in operation!

Condition: used, machine/vehicle number: WFDFLT21802025375, empty load weight: 2,620 kg, maximum load weight: 15,380 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2019, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation! Swap Body Turntable Trailer – Specifications Chassis – Swap Body Turntable Trailer Fine-grain steel welded construction Front stop, longitudinally adjustable and foldable Removable guide rollers at the front and rear Additional 4 container twist locks with heavy-duty outriggers on 20 ft base, suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Quarter fenders at the front and half fenders at the rear Spare wheel holder for 1 spare wheel including wheel fastening kit, basket design Drawbar Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment Axles & Suspension BPW disc brake axles Laser-measured axles/chassis alignment to reduce tyre wear and fuel consumption Air suspension Braking System Dual-line air brake system Colour-coded brake lines for easier servicing Air reservoir capacity: 208 litres Spring parking brake Two colour-coded front coupling heads with connecting lines to tractor unit WABCO EBS electronic braking system with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure ABS functionality Raise/lower valve with holding function in both raised and lowered positions Electrical System 24 V electrical system 4 × three-chamber rear lights 1 round reversing light Dkjdpsi Riz Hsfx Ak Tot 1 round rear fog light Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 1 × 15-pin front connector with connecting cable Additional LED work light at the rear, activated via reverse light LED work light mounted centrally between the chassis beams at the front, illuminating to the rear, activated via reverse light Registration & Certification Country of registration: Germany DEKRA inspection and approval according to §13 EG-FGV Prepared for single-line licence plate holder ECE R48 contour marking with white reflective strips on the sides and red reflective strips at the rear Attention: The pictures shown are archive images. The vehicle may still be in operation!

Condition: used, machine/vehicle number: WFDFLT21801005232, empty load weight: 2,650 kg, maximum load weight: 15,350 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, total length: 9,470 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 50 %, color: grey, Attention: The pictures shown are archive images. The vehicle may still be in operation. Fliegl ZWP 180 Standard – Specifications #Chassis – Swap Body Turntable Trailer Fine-grain steel welded chassis Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers 4 container twist locks with heavy-duty outriggers on a 20' base Suitable for 7.15 m and 7.45 m swap bodies Heavy-duty turntable with ball bearing race Aluminium side underrun protection Steel rear underrun protection Quarter fenders at the front and half fenders at the rear Without rear impact protection #Drawbar Drawbar with certified 40 mm towing eye Spring-assisted drawbar height adjustment #Axles & Suspension SAF disc brake axles Air suspension #Braking System Dual-line air brake system Spring parking brake Two colour-coded front coupling heads with connecting lines to the tractor unit Electronic Braking System (EBS) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure full ABS functionality Raise/lower valve with holding function in both raised and lowered positions #Wheels & Tyres 385/65 R22.5 tyres (manufacturer's choice) Steel wheels, factory silver finish #Electrical System 24 V electrical system Multi-chamber lighting Yellow LED side marker lights Two white front position lights Two red/white rear outline marker lights 2 × 7-pin front connectors with connecting cables Additional LED work light at the rear, activated via the reverse light #Registration & Certification Approved for registration in Germany DEKRA inspection and certification 24/7 service hotline Prepared for single-line licence plate holder Dkjdpfx Akszldqhs Tjt ECE R48 contour markings with white reflective tape on the sides and red reflective tape at the rear

Condition: used, machine/vehicle number: WFDFLT33802021791, empty load weight: 6,433 kg, maximum load weight: 28,567 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 11/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 445/45 R19,5", color: black, Please note: The images shown are archive photos. The vehicle may still be in operation. ## Fliegl Mega Curtainsider Semi-Trailer Chassis: Lightweight fine-grain steel chassis, replaceable 2" kingpin, Load-Lock outer frame, 24 t JOST two-speed landing gear, rear access ladder, door retainers, aluminium side underrun protection, galvanised rear underrun protection, quarter mudguards, anti-spray mud flaps, Heavy Blocker rear impact protection with side roller buffers, heavy-duty pallet stop, spare wheel carrier, lockable toolbox with drawer, document box. Axles & Suspension: BPW drum brake axles (8-stud hubs), laser wheel alignment, mechanical hubodometer, air suspension, automatic lift axle with forced lowering and traction aid (activated by brake pedal or manual switch). Brakes: Dual-line air brake system, spring parking brake, WABCO EBS, lift/lowering valve. Raising the lift axle increases loading/overall height by approx. 50 mm. Tyres: 445/45 R19.5 (manufacturer's choice). Electrical: 24 V LED lighting, LED side markers, LED front position lights, LED rear outline lights, 2 × 7-pin and 1 × 15-pin front sockets. Floor: Approx. 30 mm plywood floor with Omega-reinforced joints, suitable for forklift axle loads up to 7,100 kg. Front Wall: 2,580 mm high, steel corner posts, curtain release system, internal steel impact protection, additional 1,250 mm plywood lining. Dodpfxszlciij Ak Tskt Centre Posts: 3 pairs of full-length sliding posts with multiple locking positions. Side Slats: Aluminium or timber V-slats. Rear: Steel rear corner posts, double rear doors with internal locking bars, curtain tensioning system. Curtains: Reinforced curtains with welded horizontal and vertical straps, stainless steel buckles. Roof: Sliding roof, rear end lift, automotive L-roof rails, hydraulic lifting roof on both sides (+400 mm), rain gutter at rear. Certification: DEKRA approval, EN 12642 XL load securing certificate, VDI 2700 Sheet 12 beverage transport certification, ECE R70 rear warning plate.

Condition: used, machine/vehicle number: WFDFLT33502021621, empty load weight: 5,897 kg, maximum load weight: 29,103 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2017, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/55 R19,5", color: green, Please note: The images shown are archive photos. The vehicle may still be in operation. #Chassis Fifth wheel with replaceable 2" kingpin Slightly angled outer frame with integrated Load-Lock profile for securing lashing straps 24-tonne two-speed landing gear with single-side operation, straight foot design, without load compensation Retractable rear access ladder Side door retainers 2 wheel chocks with holders Aluminium side underrun protection Pallet storage box for 8 Euro pallets, mounted in front of the axle assembly (black lid) Galvanised steel rear underrun protection Quarter-shell mudguards in front of the first axle and behind each axle Anti-spray mud flaps behind each axle Heavy Blocker rear impact protection with cross beam and side roller buffers Heavy-duty pallet stop on both sides (approx. 15–20 mm high) with lashing points every 200 mm (Loading height reduced by approx. 20 mm.) Lockable plastic toolbox with drawer and storage shelf: 650 × 520 × 670 mm #Axles & Suspension SAF disc brake axles Laser wheel alignment for reduced tyre wear and fuel consumption TIS – Tyre Inflate System (automatic tyre pressure monitoring and inflation system) Air suspension Without lift axle #Braking System Dual-line compressed air braking system Spring parking brake Two non-interchangeable air couplings at the front (without connecting hoses) Electronic Braking System (EBS) Front EBS socket Raise & lower valve Dkedpjzlcdgefx Ak Tot Trailer Stability Control System #Wheels & Tyres 385/55 R19.5 tyres Manufacturer's choice Steel wheels, factory silver finish #Electrical System 24 V electrical system Multi-chamber rear lights Yellow LED side marker lights Two white LED front position lights Two red/white rear outline marker lights 2 × 7-pin and 1 × 15-pin front sockets #Floor Approx. 30 mm plywood floor Omega-reinforced transverse joints Longitudinal steel cross members Suitable for forklift axle loads up to approx. 7,100 kg #Front Wall & Front Corner Posts Front wall height: approx. 2,580 mm Steel corner posts Internal steel impact protection at approx. 140 mm height #Sliding Centre Posts pairs of full-length sliding posts Four-way insert pockets Additional long lower pockets 3 selectable post positions #Side Slats Aluminium V-type insert slats #Rear Wall & Rear Corner Posts Steel rear corner posts extending to the underside of the roof Curtain tensioning with round tube and ratchet system Double rear portal doors with two internal locking bars per door #Curtain System Reinforced side curtains with welded horizontal and vertical straps Stainless steel curtain buckles Customer branding "Bring" on both side curtains and rear doors #Roof Sliding roof system opening from rear to front Rear end lift can be folded upwards L-shaped roof rails suitable for the automotive industry EcoLift lifting roof, adjustable by approx. 380 mm on both sides with gas strut assistance Optimised rear rain gutter integrated into the rear roof bow above the doors #Approval & Certifications Country of registration: Germany EC type approval according to Directive 2007/46/EC Manufacturer's body strength certificate according to EN 12642 XL *(valid only when equipped with four rows of aluminium slats)* Additional DL 9.5 certification Heavy-duty pallet stop on both sides, approx. 25 mm high ECE R70 rear warning plate Folding "A" warning plate for waste transport Rear night parking sign

Condition: used, maximum load weight: 28,560 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 03/2026, loading space length: 12,032 mm, loading space width: 2,352 mm, loading space height: 2,698 mm, loading space volume: 68 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, FLIEGL 3-axle container chassis rigid with 40 FT Highcube container First registered in 2023 Total weight (technical) 38,000 kg Empty weight of chassis 3,640 kg Empty weight of HighCube container 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE, with starting aid with vehicle driving stability system Axle load detection Tires 6-fold 385/55 R 22.5 40 FT Highcube container right side wall can be opened as doors (multiple wings), door dimensions L 2,340 x W 2,585 mm Portal doors at the rear Dimensions i.L. (LxWxH) 12,032 x 2,352 x 2,698 mm Volume 68 cbm 25 Euro pallets Accessible with pallet truck and forklift 1-A condition RENT is the new BUYING, also available from us as a full-service rental----- Dodovzk Naepfx Ak Tjkt

Condition: used, maximum load weight: 32,700 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 08/2022, loading space length: 13,600 mm, loading space width: 2,480 mm, total width: 2,550 mm, Gross weight: 39,000 kg Unladen weight: 6,300 kg Payload: 32,700 kg Overall length: 13,850 mm Loading length: 13,650 mm Width: 2,550 mm Loading height: approx. 1,100 mm Further information - Internal height: approx. 2,600 mm Dkodpfx Aoywq E Ssk Tst - Internal length: approx. 13,650 mm - Internal width: approx. 2,480 mm - Tyres: 385/65R22.5 - SAF axles - Underrun protection - Rear forklift pocket - Air suspension - Last axle steering - "Blitz-Verdeck" sliding roof - Sliding rings - Insert slats

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT33001012559, empty load weight: 6,250 kg, maximum load weight: 17,750 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,620 mm, loading space width: 2,520 mm, total length: 10,890 mm, total width: 2,550 mm, total height: 860 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, color: black, Fliegl 3-Axle Low Loader Trailer Chassis – Low Loader Trailer Heavy-duty welded steel chassis construction Turntable steering with heavy-duty ball-bearing slewing ring Folding rear support legs 2 wheel chocks with holders Dkedozaznzepfx Ak Tst Aluminium side underrun protection Full-width rear spray flap (not compatible with forklift bracket) Semi-circular mudguards Anti-spray mudflaps on the 1st axle and behind the 2nd and 3rd axles Lockable plastic toolbox with shelf insert (620 × 360 × 440 mm, W × H × D), padlock not included Extendable outriggers for overall loading width up to 3,000 mm Central storage compartment for timber extension planks 70 mm timber extension planks for widening to 3,000 mm Lashing Equipment Heavy-duty lashing points specifically designed for low-loader applications 1 pair of recessed lashing cut-outs in the front gooseneck, each rated at 10 tonnes 4 pairs of lashing slots in the outer frame for lashing straps, each rated at 5 tonnes 7 pairs of recessed mushroom lashing points (top and side mounted), each rated at 10 tonnes 1 pair on the gooseneck 6 pairs in the low-bed section First lashing point positioned 250 mm from the front Last lashing point max. 250 mm from the rear Maximum spacing between lashing points: 1,100 mm 5 pairs of recessed lashing rings in the outer frame, each rated at 5 tonnes (convertible to stake pockets) 2 additional pairs of folding lashing rings, each rated at 10 tonnes 1 pair on the gooseneck 1 pair recessed behind the rear axle 1 pair of heavy-duty bolted lashing rings (JDT type), each rated at 6.7 tonnes, with reinforced flange plate and threaded counter support, mounted on the gooseneck Drawbar Drawbar with certified 40 mm towing eye Parking sockets for electrical, ABS and air connections integrated into the drawbar Axles & Suspension SAF drum brake axles Laser-aligned axles and suspension for reduced tyre wear and lower fuel consumption Air suspension with raise-and-lower valve Front and rear air suspension circuits operated independently Wheels & Tyres 235/75 R17.5 Fulda tyres Twin wheel configuration 6 inner steel rims 6 polished aluminium outer rims Braking System Dual-line compressed air braking system Spring-loaded parking brake Trailer Info Centre displaying operating data including axle loads (not legally calibrated) and mileage Vehicle Stability Control System Axle load detection via EBS CAN bus for display in the truck dashboard (truck preparation required) Two non-interchangeable front coupling heads with connecting hoses to the towing vehicle EBS (Electronic Braking System) with front EBS connector and connecting cable Front gooseneck with steel chequer plate flooring Integrated storage box in the transition ramp area 70 mm larch timber decking behind the gooseneck Steel chequer plate flooring over the wheel arch section Rear loading ramp area with 70 mm larch timber decking Low-bed loading deck including rear incline: 6,500 mm Loading Ramps 2 heavy-duty steel loading ramps Foldable lower ramp locking system to prevent lateral movement Timber-covered ramp surface Spring-assisted lifting mechanism for easy handling

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22701003408, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 01/2015, next inspection (TÜV): 02/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. # 2-Axle Fliegl Mega Platform Semi-Trailer ## Weights & Dimensions * Gross Vehicle Weight (GVW): 27,000 kg * Payload (approx.): 22,200 kg * Axle load: 16,000 kg * Kingpin load: 11,000 kg * Unladen weight (approx.): 4,800 kg (± manufacturing tolerance) * Overall length: approx. 13,850 mm * Overall width: max. 2,550 mm * Overall height: approx. 2,245 mm * Platform length: approx. 13,650 mm * Platform width: approx. 2,480 mm * Fifth wheel height: approx. 950 mm * Kingpin setting: approx. 1,680 mm * Front corner radius: approx. 2,040 mm --- ## Chassis – Mega Platform Semi-Trailer * High-tensile fine-grain steel welded chassis construction * Fifth wheel plate with replaceable 2" king pin * 13 pairs of recessed lashing rings integrated into the outer frame, each rated at 2.5 tonnes * Outer frame with integrated Load-Lock profile for quick attachment of lashing straps * 24-tonne two-speed landing gear, single-side operation, straight foot design, without thrust compensation * Wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Quarter mudguards --- ## Axles & Suspension * 1st axle: SAF drum brake axle * 2nd axle: BPW drum brake axle * Air suspension --- ## Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front (without connecting hoses) * EBS (Electronic Braking System) with front EBS socket, without connecting cable * Integrated raise-and-lower valve * Vehicle Stability Control System Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. --- ## Wheels & Tyres * 385/55 R19.5 tyres (manufacturer's choice) * Steel rims, factory silver finish --- ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights, recessed as far as possible for maximum protection * 2 white front position lights * 2 white/red rear outline marker lights * 2 × 7-pin front sockets, without connecting cables --- ## Platform * Approx. 30 mm phenolic-coated plywood floor * Omega-reinforced cross joints * Longitudinal subframe supports for high point-load capacity * Suitable for forklift axle loads up to 7,100 kg Note: Minor floor distortion due to weather conditions is possible. --- ## Front Wall * Front wall, approx. 1,200 mm high * Heavy-duty steel corner posts in volume specification * Integrated inspection windows --- ## Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included * 24/7 service hotline * Prepared for single-line licence plate holder * Rear warning plate according to ECE R70 * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) --- ## Paint Finish * Chassis: RAL 3002 Carmine Red * Landing gear: black coated * Front wall: RAL 3002 Carmine Red --- Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. Dkedpfjy Sk U Ajx Ak Tet

Condition: new, maximum load weight: 16,920 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,200 mm, loading space width: 2,520 mm, loading space height: 900 mm, total width: 2,550 mm, Total weight: 24,000 kg / 30,000 kg Unladen weight: 7,080 kg Payload: 16,920 kg / 22,920 kg Overall length: 10,825 mm Loading length: 8,200 mm total Width: 2,5250 mm Loading height: 900 mm Additional information: plus pre-transport / preparation from warehouse location 26639 Wiesmoor: €1,280.00 net Chassis, low loader trailer Steel welded construction Turntable with robust ball bearing, storage box embedded in the turntable extension Rear support, foldable Dedszhhw Dopfx Ak Tskt 2 jacking pads with holder Aluminum side impact protection Mud flaps at the rear, covering the entire width (not in conjunction with forklift holder) Quarter fenders in front of and behind the 1st axle, with anti-spray mud flaps behind the 2nd and 3rd axles 1 spare wheel holder for 1 spare wheel, with wheel fastening set 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable Extensions, extendable to 3,000 mm (not in rear slope) (however, the track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the center of the loading area Wooden planks, 70 mm, for extension to 3000 mm Tie-down points, low loader 3 pairs of tie-down points, each 10 tons, integrated into the floor at the front 6 pairs of tie-down loops, each 10 tons, recessed at the top and sides in the outer frame 1 x in the neck area remainder distributed in between 1 x rear slope 5 pairs of ring tie-down points recessed in the outer frame, each 5 tons (convertible to stake pockets) 1 pair of folding tie-down points additionally recessed into the low loader floor behind the 3rd axle, each 10 tons 1 pair of screw tie-down points at the front in the corners, each 6.7 tons, with a large flange plate including thread as a counter holder Coupling device, trailer, turntable Drawbar with tested 40 mm drawbar eye Axles + Suspension Drum brake axles, at the manufacturer's choice "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Air suspension with raising & lowering valve Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, with connection lines to the tractor unit 24 Volt EBS, Electronic Braking System with EBS plug at the front, with connection cable Attention: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! Axle load recognition via EBS-CAN bus signal, for display on the display in the driver's cab, the truck must be appropriately prepared, no truck installation (no calibrated scale) Vehicle - Driving Stability System "TPMS" Tire Pressure Monitoring System according to ECE R 141, display on the display in the tractor unit, via EBS, without truck installation (this must be a prerequisite in the truck. Only on standard tires) Wheels and tires 235 / 75 R 17.5" Tires at the manufacturer's choice Steel rims in twin arrangement, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides yellow LED lighting on the sides, linked to the turn signal "flashing side lights" 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 LED rotating beacon with holder, switched via parking lights (beacon removable) 2 pairs of warning boards, double LED illuminated and extendable to 3,000 mm Floor Front area, steel floor thereafter with approx. 70 mm

Condition: used, empty load weight: 12,200 kg, maximum load weight: 35,800 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 09/2024, next inspection (TÜV): 07/2027, suspension: air, tire size: 235/75 17,5, tire condition: 80 %, color: black, Year of construction: 2024, front tire size: 235/75 17,5, rear tire size: 235/75 17,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, R17,5 * Tire sizes: 235/75 R17,5 * hydr 26t loading ramp * Remote control for loading ramp * Rear-steering axle * Saddle height 1250mm * Low-bed length incl. slope 9200mm * Gooseneck length 4300mm * Internal height low-bed 3050mm * Loading height low-bed 920mm Djdpfxezhfu To Ak Tskt * Rear outrigger extension 400mm each * Fifth wheel plate with interchangeable kingpin * 30mm Omega floor * 24t support * Axle load detection in the truck * Tire pressure monitoring * Extendable warning signs * 10-year warranty against rust * Upon request, we will gladly send you a video * Further pictures and a construction description Disclaimer: Subject to changes, prior sale and errors. You can find more pictures and videos on our website. Our extensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Application for all (export) documents * Ordering export license plates / customs license plates * Vehicle preparation: New tarpaulins, lettering, paintwork, etc. * Professional loading / cargo securing * TÜV inspections, registration service * Transport of commercial vehicles Ask our trained specialists, we will be happy to advise you.

Condition: used, empty load weight: 7,950 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2013, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,850 mm, loading space volume: 95 m³, tire size: 385/55 R22,5, wheelbase: 1,310 mm, color: black, Equipment: ABS, Disc brake EBS Payload 27,050 kg Air-lift suspension Roll-up tarpaulin Platform SAF axles Alcoa aluminum rims Lifting and lowering device Lashing rings Dsdpfx Akouiytle Tekt Errors excepted

Condition: used, empty load weight: 7,950 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 01/2013, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,850 mm, loading space volume: 95 m³, tire size: 385/55 R22,5, wheelbase: 1,310 mm, color: black, Equipment: ABS, Disc brake EBS Payload 27,050 kg Air-lift suspension Roll-up tarpaulin Platform Dkedpfx Aeuiyvyek Tot SAF axles Alcoa aluminum rims Lifting and lowering device Lashing rings Errors excepted

Condition: used, functionality: fully functional, color: red, trailer brake: trailer unbraked, Shunting locomotive / Shunter / Switching locomotive Dkjdpfxozix R De Ak Tot

Condition: new, functionality: fully functional, machine/vehicle number: S1576, overall weight: 31,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, loading space length: 7,200 mm, loading space width: 2,250 mm, loading space height: 1,200 mm, loading space volume: 20 m³, suspension: hydraulics, tire size: 600/55-R26,5, tire condition: 100 %, wheelbase: 1,810 mm, maximum speed: 60 km/h, color: red, trailer brake: trailer braked, Year of construction: 2025, Description Chassis painted in Novagrau: Payload optimized with integrated vehicle frame. Gross weight 31,000 kg, rear axle load up to 20,000 kg, assumed fifth wheel load 11,000 kg, axle spacing approx. 1810 mm, fifth wheel height approx. 1400 mm. Manual landing gear. Heavy-duty 30 HP rear tipper body with front cylinder. Half-shell steel body made of Hardox 400, 6 mm; approx. 7200 mm x 2250 mm x 1200 mm; all-steel body primed, painted red. Hydraulic tailgate (requires one double-acting control circuit). 2-line compressed air braking system. 2 braked axles, rear axle steered with automatic locking. Dkedpeyik R Ijfx Ak Tjt Standard drum brake axles. Steel rims. 60 km/h version for Germany with TÜV data sheet (incl. outline marker lights, side marker lights). Hydraulic suspension. Hydraulically foldable underride protection. 24V lighting with 15-pin socket, without connection cable. Rear outline marker lights (white/red). Front position lights (white). Contour marking according to ECE R 048. Subject to prior sale! Information without guarantee!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,100 kg, maximum load weight: 33,900 kg, overall weight: 39,000 kg, axle configuration: 3 axles, permissible axle load (axle 1): 12,000 kg, permissible axle load (axle 2): 12,000 kg, permissible axle load (axle 3): 12,000 kg, loading space length: 9,325 mm, loading space width: 2,470 mm, loading space height: 1,750 mm, loading space volume: 40 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,230 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, ## Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ## Chassis – Semi-Tipper Trailer * High-tensile fine-grain steel welded lightweight construction (basic lightweight design) * Patented curved front end design * Fifth wheel plate with replaceable 2” king pin * 24-tonne 2-speed landing gear, single-side operation, with semi-round base and straight mounting plate, including thrust compensations * Spare wheel carrier for 1 spare wheel including mounting kit * Spare wheel matching the original tyres, mounted on steel rim * Lockable plastic toolbox with drawer and shelf insert (650 × 520 × 670 mm, W × H × D) * Tarpaulin support bar with holder Dodpfx Aszhgp Sek Tokt * Rear towing hooks ## Axles & Suspension * Disc brake axles with 430 mm brake discs * Off-road axle specification * Laser-aligned axles and running gear for reduced tyre wear and fuel consumption * Air suspension system * 1st axle as automatic lifting axle including forced lowering and traction aid * Activated via “3x braking” * Function active up to 30% axle overload and max. 25 km/h * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust ## Braking System * Dual-line compressed air braking system * Colour-coded piping for easy maintenance * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front * EBS electronic braking system with front EBS socket * Raise-and-lower valve integrated ## Vehicle Stability System * Automatic tipping lowering function with shut-off valve ## Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims, factory silver finish ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * LED licence plate lighting * Yellow LED side marker lights * White LED front position lights (2 units) * White/red LED rear outline marker lights (2 units) * 2 × 7-pin and 1 × 15-pin front sockets (without connecting cables) * Additional integrated rear LED work lights ## Hydraulic System * Low-pressure hydraulic cylinder, max. 170 bar * First stage hard chrome plated * HDK screw coupling, fixed section, NW 48 mm * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut ## Tipping Body – Aluminium Box Body (40 m³) * High-quality wear-resistant aluminium body construction * Sloped 5 mm front wall with external hydraulic cylinder mounting * Side walls made of 30 mm hollow chamber profiles, fully welded * Upper edge profile designed for improved material discharge resistance * Internal access ladder at front wall * External shovel and broom holder on front wall * Aerodynamic tapered “Greenline” body design ### Rear Door System * “Membrane” tailgate design * Pendulum rear door with double-joint hinge system * Externally mounted with double hook locking system * Rubber-sealed tailgate * Central grain slide gate ### Floor & Equipment * Continuous 6 mm aluminium floor * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 8,000 kg, maximum load weight: 31,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,330 mm, loading space height: 1,950 mm, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,470 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. Dksdpfszhgkisx Ak Tot ## Chassis – Semi-Tipper Trailer * High-tensile fine-grain steel welded lightweight construction with slight frame offset * Fifth wheel plate with replaceable 2” king pin * 24-tonne 2-speed landing gear, single-side operation, with semi-round base and straight mounting plate * Integrated mudguard mounting system with stone-repellent surface finish * Spray flaps only on last axle * 1 tarpaulin support bar with holder * 1 aluminium ladder approx. 3,550 mm with side mounting brackets * 2 rear towing hooks * Side-mounted tarpaulin bow holder on chassis ## Axles & Suspension * SAF disc brake axles with 430 mm brake discs * Laser-aligned axles and running gear for reduced tyre wear and fuel consumption * Air suspension system * 1st axle as automatic lifting axle, additionally electronically controlled from the truck * Includes forced lowering and traction aid * Galvanised lifting axle mechanism * 10-year anti-corrosion warranty against perforation rust ## Braking System * Dual-line compressed air braking system * Colour-coded pipe routing for easy maintenance * Two non-interchangeable coupling heads at the front * 24 V EBS electronic braking system with front EBS socket * Raise-and-lower valve integrated Note: The trailer may only be operated with towing vehicles ensuring proper ABS functionality. ## Vehicle Stability System * Automatic tipping lowering function with shut-off valve * Axle load detection via EBS CAN bus signal for display in the driver’s cabin ## Wheels & Tyres * 385/65 R 22.5 tyres * Steel rims, factory silver finish * TPMS (Tyre Pressure Monitoring System) according to ECE R141, displayed via truck EBS system ## Electrical System * 24 V electrical system * LED multi-chamber rear lights * Yellow LED side marker lights linked to indicators (flashing side lights) * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 2 × 7-pin and 1 × 15-pin front sockets * 2 additional integrated rear LED work lights ## Hydraulic System * Low-pressure hydraulic cylinder, max. 170 bar * First stage hard chrome plated * HDK screw coupling, fixed section, NW 48 mm * Hydraulic operation via truck PTO (power take-off) * Hydraulic connection with hose and HDK screw coupling NW 48 mm with knurled nut ## Tipping Body – Steel Tipping Body (HB 400) * High wear-resistant HB 400 steel body construction * Sloped front wall with external hydraulic cylinder mounting * Foldable aluminium protective sheet on right-hand side for sliding tarpaulin * External shovel and broom holder on front wall * Internal access ladder at front wall * Side walls: 4 mm continuous steel * Floor: 5 mm continuous steel ### Rear Door System * “Membrane” tailgate design * Two-piece rear door (50/50 split) * One sliding bolt integrated into right-hand door leaf * External rotary locking system with bottom mechanical locking ## Operating Platform & Equipment * Standing platform with access ladder * Connection panel for air, electrics and braking system with large free working space for optimal operation * Sliding tarpaulin system, one-sided storage (right-hand side driving direction) * Central locking on left-hand side

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,100 kg, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, total length: 9,325 mm, total width: 2,550 mm, total height: 1,000 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – 3-Axle Turntable Combination Trailer for Roll-Off Containers & Machinery Transport * High-tensile steel welded chassis construction * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Adjustable and removable longitudinal guide rails, approx. 115 mm high * Heavy-duty turntable with ball-bearing slewing ring * Recessed mushroom lashing points on the top and sides of the outer frame, each rated at 5 tonnes * Integrated stake pockets in the outer frame (internal dimensions: 70 × 40 mm), convertible to 5-tonne lashing rings * Wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Quarter mudguards * Spare wheel carrier including mounting kit * Spare wheel matching the standard tyres, mounted on a steel rim * Lockable plastic toolbox with drawer and shelf insert, dimensions: 650 × 520 × 670 mm (W × H × D) ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * Drum brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption Dodszhf Akopfx Ak Tokt * Air suspension with raise-and-lower valve ### Wheels & Tyres * 235/75 R 17.5 tyres * Twin steel wheels, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Electronic Vehicle Stability Control System * Duomatic air coupling at the front with connecting line to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 1 × 15-pin front connector with connecting cable ### Loading Platform * Steel floor * Recessed front roller channel for roll-off containers * Suitable for roll-off containers from 5,000 mm to 7,000 mm in length ### Loading Ramps * Lockable storage compartment for loading ramps beneath the loading platform * Reinforced access hatch suitable for driving over * 1 pair of aluminium loading ramps, approx. 3,000 mm long and 450 mm wide * Load capacity: 14,000 kg per pair ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Surface Protection & Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,840 kg, maximum load weight: 16,160 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, total length: 9,975 mm, total width: 2,550 mm, total height: 1,000 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Combination Trailer for Roll-Off Containers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Low-tension locking system with a clamping force of 6 tonnes per locking claw * The original system – proven for more than 30 years * Adjustable and removable longitudinal guide rails, approx. 115 mm high * Heavy-duty turntable with ball-bearing slewing ring * Recessed mushroom lashing points on the top and sides of the outer frame, each rated at 5 tonnes * Combination stake pockets with bolted lashing rings integrated into the outer frame, each rated at 5 tonnes (internal dimensions approx. 72 × 42 mm) * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Four quarter mudguards * Lockable plastic toolbox (600 × 425 × 460 mm) * Open storage box for container safety net Dedpfszhfz Tsx Ak Tskt ### Drawbar * Drawbar with certified 40 mm towing eye * Pneumatically assisted height-adjustable Y-type drawbar (raise/lower function) ### Axles & Suspension * Drum brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * External grease points for easier axle maintenance * Air suspension with raise-and-lower valve * Air suspension pressure gauge (air spring pressure indicator) ### Wheels & Tyres * 235/75 R 17.5 tyres * Manufacturer's choice * Twin steel wheels, factory silver finish * TPMS (Tyre Pressure Monitoring System) according to ECE R141, displayed via the towing vehicle's EBS system (no additional truck installation required) ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Axle load detection via EBS CAN bus for display in the driver's cab * Electronic Vehicle Stability Control System * Duomatic air coupling at the front with connecting line to the towing vehicle * 24 V EBS (Electronic Braking System) with front EBS connector and connecting cable ### Electrical System * 24 V electrical system * LED multi-chamber rear lights * LED licence plate lighting * Yellow LED side marker lights * Flashing LED side marker lights linked to the turn indicators * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 1 × 15-pin front connector with connecting cable * Parking holders for electrical, air and EBS connections on the drawbar * Additional rear LED work light activated via reverse gear * Removable LED rotating beacon with holder, activated via the parking lights * LED work lights on both sides, activated via reverse gear ### Loading Platform * Steel floor * Recessed front roller channel for roll-off containers * Suitable for roll-off containers from 5,000 mm to 7,000 mm in length ### Loading Ramps * Lockable storage compartment for loading ramps beneath the loading platform * 1 pair of aluminium loading ramps, approx. 3,000 mm long and 450 mm wide * Load capacity: 14,000 kg per pair ### Registration & Signage * Foldable "A" warning sign for waste transport * Rear parking board ### Surface Protection & Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 1,850 kg, maximum load weight: 8,650 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 3,100 mm, loading space width: 1,740 mm, total length: 4,900 mm, total width: 2,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Tandem Low-Bed Trailer for Skip Containers * High-tensile steel welded chassis construction * 1 pair of adjustable and removable skip container locking wedges * 1 pair positioned in front of the container * Lashing rails for skip containers on both sides of the body * Front jockey wheel * Steel mudguards covering both wheels * Aluminium side underrun protection * 2 wheel chocks with holders * Recessed rear storage compartment integrated into the floor, approx. 650 × 240 × 240 mm (W × L × D), with slightly raised lid ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * 2 Euro axles (manufacturer's choice) with tapered roller bearings and S-cam drum brakes * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Parabolic leaf suspension with maintenance-free steel-rubber bushings and mechanical load equalisation (walking beam system) ### Wheels & Tyres * 235/75 R 17.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * 24 V ABS and automatic load-dependent braking (ALB), with front ABS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. Dedszhfzgjpfx Ak Tokt ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 × 7-pin non-interchangeable front connectors with connecting cable ### Low-Bed Body (TTS) * Low-profile steel well body * Steel floor plate * Steel side walls fully welded to the floor for maximum durability Note: Minor floor distortion caused by the welding process is technically normal. ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis painted in customer's colour * Drawbar painted to match the chassis --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802035389, empty load weight: 3,160 kg, maximum load weight: 34,840 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2024, next inspection (TÜV): 03/2027, total length: 7,690 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 90 %, color: grey, The images are archive images! The vehicle may still be in use! Fine-grained steel welded construction, fifth wheel coupling with interchangeable 2" kingpin (Chassis prepared for subsequent retrofitting, drip tray, 4 x hose holders, footboards, Fliegl standard) Container fittings: 1 x 20 ft in the center (or swap body container 7.15 / 7.45 / 7.82), not retractable at the front, the pivot pins of the container locking mechanism in the longer version. 24 tons, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Chocks with holder Side underrun protection Rear underrun protection with deep step for easier access + footboard inside Semi-elliptical fenders with anti-spray flaps according to EC Axles + Suspension BPW or SAF disc brake axles at the manufacturer's choice, with 430 mm disc diameter, "Axle/chassis laser-aligned" to reduce tire wear and fuel consumption Axle spacing offset 1410/1310 mm (combined transport) up to 44 tons gross vehicle weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuated by "3x braking" (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Braking system 2-line compressed air braking system Color-coded line routing for easy servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line 24 Volt EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be pulled by towing vehicles which ensure the effectiveness of the ABS! with lifting and lowering valve + auto-reset function Vehicle - Driving Stability System Axle load detection via EBS-CAN bus signal, for display on the dashboard in the driver's cab, the truck must be prepared accordingly, no truck installation (no calibrated scale) Wheels and tires 385/65 R22.5" manufacturer's choice Steel rims, factory silver Dkedpfx Aoy Tvuwjk Tet Electrical system 24 Volt, multi-chamber lights in LED, yellow LED lighting on the side, license plate lighting in LED, (Note! with certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front in LED 2 white/red side marker lights at the rear in LED 2 x 7-pin and 1 x 15-pin non-interchangeable sockets at the front, without connection cable additional LED work lights at the rear, switched via reversing light Operating instructions This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of registration/Signage Germany with Dekra inspection and certificate (according to §13 EG - FGV) 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side, yellow at the rear The images are archive images! The vehicle may still be in use!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802030369, empty load weight: 31,110 kg, maximum load weight: 34,889 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 01/2027, total length: 7,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, # Fliegl Chemical Tank Container Chassis Please note: The images shown are archive photos. The vehicle may still be in operation. ## Chassis * High-strength fine-grain steel welded chassis * Fifth wheel with replaceable 2" kingpin * Container configuration: * 1 × centrally positioned 20 ft ISO tank container * Alternatively suitable for 7.15 m / 7.45 m swap bodies * Front container locks in fixed (non-recessed) position * Extended container locking twist locks * 24-tonne, two-speed landing gear with single-side operation, straight foot design, without load compensation * Wheel chocks with holders * Side underrun protection * Aluminium rear underrun protection * EC-compliant anti-spray mud flaps * Stainless steel spill containment tray with: * 1¼" drain pipe * 1¼" shut-off valve * Drip tray included * Perforated anti-slip walkways (approx. 400 mm wide) on both sides between spill tray and chassis rails * Hose storage system approx. 4,500 mm long (including hose compartment) for: * 2 × DN 200 hoses (outer positions) * 2 × DN 160 hoses (centre position) * Rear stainless steel hose box: * Approx. 300 mm deep * Splash-proof * Stainless steel lid with full rubber seal * Drain opening at the lowest point * Stainless steel grounding lug at the rear right-hand side of the chassis * International grounding identification label * Rear access steps on the right-hand side leading to the underrun protection * Additional anti-slip step on the right-hand main chassis rail (approx. 260 × 300 mm) ## Axles & Suspension * SAF disc brake axles * Laser wheel alignment for reduced tyre wear and fuel consumption * Offset axle spacing: 1,410 / 1,310 mm * Suitable for combined transport up to a gross combination weight of 44 tonnes * Air suspension * First axle with automatic lift axle * Automatic lowering function and traction aid * Lift axle activated by pressing the brake pedal three times * Traction aid operational up to 30% axle overload and speeds of up to 25 km/h ## Braking System * Dual-line compressed air braking system * Colour-coded air lines for simplified servicing * Spring parking brake * Non-interchangeable air couplings at the front (without connecting hoses) * Electronic Braking System (EBS) * Front EBS socket without connecting cable * Lift and lowering valve * Vehicle Stability Control System * Axle load monitoring via EBS CAN bus for display in the truck dashboard (truck preparation required) Note: The trailer may only be operated with towing vehicles capable of ensuring the correct functioning of the ABS system. ## Wheels & Tyres * 385/65 R22.5 tyres * Manufacturer's choice * Steel wheels, factory silver finish ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * Two white front position lights * Two red/white rear outline marker lights * 15-pin front connector (without connecting cable) Dksdpfxoy Tvphs Ak Tst # Approval & ADR Equipment * ECE R70 rear warning plate * ADR approval in accordance with ADR 9.1.1.2 * Approved for EX/II and EX/III vehicles * ADR vehicle approval certificate for the transport of certain dangerous goods (formerly B3) * Rear warning plate included * Not approved for UN 0331 and UN 0332 explosives (Class B-E) * Contour markings in accordance with ECE R048: * White reflective markings on the sides * Yellow reflective markings at the rear