Used Fliegl Zts Trailers for sale (300)

Condition: used, overall weight: 35,000 kg, empty load weight: 7,950 kg, axle configuration: 3 axles, wheelbase: 1,310 mm, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,850 mm, loading space volume: 95 m³, first registration: 03/2013, color: black, tire size: 385/55 R22,5, Equipment: ABS, Disc brake EBS Payload 27,050 kg Air-lift suspension Roll-up tarpaulin Platform SAF axles Alcoa aluminum rims Lifting and lowering device Deliqsuiytlsm Sbsut Lashing rings Errors excepted

Condition: used, overall weight: 38,000 kg, maximum load weight: 30,080 kg, axle configuration: 3 axles, loading space length: 14,715 mm, loading space width: 2,468 mm, loading space height: 2,830 mm, loading space volume: 102 m³, first registration: 07/2022, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Fliegl moving floor +/- 102 cbm, long truck type 1, cargo floor with 21 boards 8 mm, complete emptying (moving front wall), push-in/push-out function, loading pressure gauge, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roll-up tarpaulin, service door at the front, side wall protection tarpaulin, aluminum wear plates inside (wedge-shaped), aluminum wear strips on the end pieces, stainless steel wear plate at the rear under the moving floor, ABS, EBS, SAF axle(s), disc brakes, air suspension with lifting/lowering device HA, support winch(s), storage box, closed side impact protection, vehicle can be covered with advertising and/or labeled Delioupcu Tjqm Sbeut Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us!

Condition: used, overall weight: 38,000 kg, maximum load weight: 28,560 kg, axle configuration: 3 axles, loading space length: 12,032 mm, loading space width: 2,352 mm, loading space height: 2,698 mm, loading space volume: 68 m³, first registration: 02/2023, next inspection (TÜV): 03/2026, Year of construction: 2023, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, FLIEGL 3-axle container chassis rigid with 40 FT Highcube container First registered in 2023 Total weight (technical) 38,000 kg Duelsvzk Naoiqm Sbet Empty weight of chassis 3,640 kg Empty weight of HighCube container 5,800 kg SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE, with starting aid with vehicle driving stability system Axle load detection Tires 6-fold 385/55 R 22.5 40 FT Highcube container right side wall can be opened as doors (multiple wings), door dimensions L 2,340 x W 2,585 mm Portal doors at the rear Dimensions i.L. (LxWxH) 12,032 x 2,352 x 2,698 mm Volume 68 cbm 25 Euro pallets Accessible with pallet truck and forklift 1-A condition RENT is the new BUYING, also available from us as a full-service rental-----

Condition: new, overall weight: 40,000 kg, maximum load weight: 31,920 kg, axle configuration: > 3 axles, loading space length: 10,410 mm, loading space width: 2,500 mm, loading space height: 900 mm, total width: 2,550 mm, New vehicle Fliegl 4 axle low loader trailer with ramps, type VTS 400 Total weight: 24,000kg/40,000kg Empty weight: 8,080kg Payload: 15,920kg/31,920kg Total length: 11,940mm Loading length: total approx. 10,410mm, offset approx. 2,490mm, loading bed including rear bevel approx. 7,920mm Width: 2,550mm Loading height: 900mm Further information plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 ¤/ net Rent-purchase offer: term 48 months, down payment only VAT, residual value 40% monthly rate EUR 759.00 Chassis Low-loader trailer Steel welded construction Turntable with strong ball bearing ring Foldable rear support 2 wheel chocks with holder Aluminum side impact protection Rear splash flaps across the entire width Half-shell mudguards 1st + 2nd axle with anti-spray splash flaps behind each axle, Anti-spray splash flaps in front of and behind 3rd and 4th axle Dujliqmovv D Ixs Sbst Excavator arm recess over the rear axles starting at the rear, approx. 1800 mm long, approx. 650 mm wide and approx. 150 mm deep, 2 pairs of lashing holes, each 5 tons. in the excavator arm recess on the side of the longitudinal frame approx. 300 mm from the front and approx. 200 mm in front of the rear bevel 1 plastic tool box, w=600 / h=425 / d=460 mm, lockable Storage box embedded in the floor on a crank with lid, W=720 mm/ L=520 mm / D= 170 mm Extensions extendable to 3,000 mm (not in the rear bevel) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width 2,550 mm) Storage compartment for wooden planks below the low-loading area Wooden planks 70 mm for widening to 3,000 mm Lashing eyes for low-loader 1 pair of lashing cutouts embedded in the longitudinal beam at the front on a crank, 10 tons each. 4 pairs of lashing holes in the outer frame, each with 5 tons (tension belt attachment) 9 pairs of lashing mushrooms, each 10 tons, embedded in the outer frame at the top and side 2 x at the front on the bend 7 x in the low bed First lashing eye 250 mm from the front and last max. 250 mm from the back, distance between the lashing eyes not greater than 1100 mm 3 additional pairs of folding lashing eyes, each 10 tons 1 x on the bend (sticks out) 1 x at the beginning of the low bed, embedded inside on the longitudinal beams 1 x embedded in the floor behind the last axle Towbar with tested 50 mm towing eye Towbar height adjustment via spring Axles + suspension Drum brake axles, as selected by the manufacturer "Laser-measured axles/chassis" Reduction in tire wear and fuel consumption Air suspension with raising & lowering valve + Auto-reset function Wheels and tires 235 / 75 R 17.5" at the manufacturer's choice Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake Axle load detection via EBS-Canbus signal, for display on display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) Vehicle - driving stability system 2 interchangeable coupling heads at the front, with connecting cables to the motor vehicle, 12-24 volt EBS, electronic braking system with EBS plug at the front, with connecting cable Knorr brand Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrics 12-24 volts, multi-chamber LED lights, yellow LED lighting on the side, license plate lighting in LED, (Note! Incorrect diagnoses can occur with certain towing vehicles, although the function is p

Condition: ready for operation (used), Functionality: fully functional, overall weight: 35,000 kg, empty load weight: 7,280 kg, axle configuration: 3 axles, first registration: 01/2019, suspension: air, color: grey, tire size: 385/65 R22,5", Year of construction: 2019, outer dimension length: 13,860 mm, outer dimension width: 2,550 mm, machine/vehicle number: WGJ133354KM800641, Vehicle is being offered on behalf of a third party. Please note: The images are archive images; the vehicle may still be in use! Equipment: Triple control block with control panel (3 x double-acting valves NG 10, 24 V, continuous current on pin 9 with a 15-pin connector), pressure line NW 16, return line NW 20 with screw coupling, without truck installation (hydraulic system on trucks with HDK screw couplings size 6, supply and unpressurized return required) Mechanical support leg Dual-circuit pneumatic braking system, 3 braked axles, rear axle steered, automatically lockable, drum brake axles, 1st axle with automatic lifting axle Steel rims, tires 385/65 R22.5" 100 km/h version with EBS module unit Haldex and COC papers Dueliqm Sev I Shqsbjt Air suspension Body 11800 mm x 2380 mm (total length with 500 mm rear wall), side walls and rear wall 2300 mm high, hydraulic Large rear wall 500 mm Hydraulic TopLift light folding roof with net cover for load securing, hydraulically operated from the tractor, not available with raised side walls and foldable side walls (front wall raised not required), with safety valve Hydraulic sliding floor with all-round polyurethane strips, optimal sealing, hose routing 24 V lighting with 15-pin socket and connecting cable Side marker lights right and left (yellow), rear clearance lights (white/red), front position lights (white) Contour markings according to ECE 104

Condition: used, overall weight: 21,000 kg, maximum load weight: 15,800 kg, axle configuration: 2 axles, first registration: 04/2010, Year of construction: 2010, total width: 2,700 mm, total height: 2,850 mm, Fliegl ASW 248 S BIG RUN central axle trailer/swap chassis. The trailer was ordered and not registered because the owner only used the trailer on his own railing. Net: 19,900 euros. Dujliqmov Hy Ezj Sbot Location 21629 Neu-Wulmstorf See the optical and technical condition for yourself on site. We support you with export Original data confirmation for country homologation, supplier declaration, preparation of export documents, customs license plate if required -a viewing and test drive is possible at any time, even on weekends, by telephone arrangement! Trade-in and vehicle transfer on request Visit our Facebook page.

Condition: used, overall weight: 35,000 kg, empty load weight: 7,950 kg, axle configuration: 3 axles, wheelbase: 1,310 mm, loading space length: 13,500 mm, loading space width: 2,470 mm, loading space height: 2,850 mm, loading space volume: 95 m³, first registration: 01/2013, color: black, tire size: 385/55 R22,5, Equipment: ABS, Disc brake EBS Payload 27,050 kg Air-lift suspension Deliqm Ssuiyvysbsut Roll-up tarpaulin Platform SAF axles Alcoa aluminum rims Lifting and lowering device Lashing rings Errors excepted

Condition: used, overall weight: 31,000 kg, maximum load weight: 24,200 kg, axle configuration: 2 axles, loading space length: 13,850 mm, loading space width: 2,480 mm, loading space height: 2,860 mm, loading space volume: 93 m³, first registration: 04/2018, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Moving floor +/- 93 cbm, double-wing door with espagnolette lock at the rear, access and standing area at the front of the structure, roll-up tarpaulin, "Cargo Floor" floor with 21 10 mm boards, stainless steel wear plate at the rear under the moving floor, 12 lashing eyes on each side, complete emptying (moving bulkhead), push-in/push-out function, loading pressure gauge, folding rear light protection, cable remote control, ABS, EBS, BPW Eco Plus axle(s), drum brake system, support winches, 1x storage box, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Dolior Hlvkjqm Sbout We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: good (used), axle configuration: 2 axles, wheelbase: 8,850 mm, loading space length: 13,450 mm, loading space width: 2,470 mm, loading space height: 2,400 mm, first registration: 07/2010, suspension: air, tire size: 385 65 R 22,5, Year of construction: 2010, Equipment: tail-lift, Axle configuration Tyre size: 385 65 R 22,5 Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 80%; Tyre profile right: 80%; Suspension: air suspension Rear axle 2: Max. axle load: 9000 kg; Steering; Tyre profile left: 80%; Tyre profile right: 80% Measures Dimensions (LxW): 1388 x 260 cm Weights Empty weight: 9.800 kg Djliqmourwacs Sbout Carrying capacity: 20.200 kg GVW: 30.000 kg Functional Tail lift: dhollandia, tail lift, 2000 kg Cooling: 0 °C to 30 °C Condition Visual appearance: good Identification Registration number: OL-70-BZ Other information Cool unit make: Thermo King Additional information Please contact Rob Veldhuis or Arjan Kamsteeg for more information Cool unit brand: Thermo King

Condition: new, overall weight: 30,000 kg, maximum load weight: 23,900 kg, axle configuration: 3 axles, loading space length: 8,670 mm, loading space width: 2,550 mm, loading space height: 860 mm, total width: 2,550 mm, New vehicle Fliegl 3 axle low loader trailer with ramps, type DTS 300 Vehicle number: - 787 Vehicle / body: low loader First registration: new vehicle without first registration Total weight: 24,000kg/ 30,000kg Empty weight: 6,100kg Payload: 17,900kg/23,900kg Total length: 10,890mm Loading length: 8,670mm total, 2,170mm offset, 6,500mm loading bed Width: 2,550mm Djliqmovu N Ste Sbjut Loading height: 860mm Further information: Low loader trailer chassis Steel welded construction Turntable with strong ball bearing ring Foldable rear support 2 wheel chocks with holder Aluminum side protection Splash flaps at the rear over entire width (not in conjunction with forklift bracket) Half-shell mudguard 1st axle with anti-spray splash flaps Anti-spray splash flaps behind 2nd and 3rd axles 1 plastic tool box, w=600 / h=425 / d=460 mm, lockable Extensions extendable to 3,000 mm (not in rear bevel) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes for low loader 1 pair of lashing cutouts in the longitudinal beam at the front on a bend, 10 tons each. 4 pairs of lashing holes in the outer frame of the crank, each with 5 tons (tension belt attachment) 7 pairs of lashing mushrooms, set into the outer frame at the top and side, each with 10 tons 1 x at the front on the crank 6 x in the low bed First lashing eye 250 mm from the front and last max. 250 mm from the back, distance between the lashing eyes not greater than 1100 mm 5 pairs of ring lashing eyes set into the outer frame, each with 5 tons (can be converted to stake pockets) 2 additional pairs of folding lashing eyes, each with 10 tons 1 x on the crank (protrudes) 1 x set into the ground behind the last axle Towbar with tested 40 mm towbar Towbar height adjustment via spring Axles + suspension Drum brake axles, as selected by the manufacturer "Laser-measured axle/chassis" Reduction in tire wear and tear Fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17.5" at the manufacturer's discretion Steel rims in twin arrangement, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 interchangeable coupling heads at the front, with connecting lines to the towing vehicle, 24 volt ABS and ALB, with ABS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red lane keeping lights at the rear 2 x 7-pin, non-interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (light removable) 2 pairs of warning signs with double LED lighting and extendable to 3,000 mm Floor Front offset with steel/checker plate covering Storage box embedded in the ramp to the offset then with approx. 70 mm softwood floor, steel/checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Low loading area including rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Additional ramp lock can be folded down at the bottom (to prevent the ramps from slipping si

Condition: excellent (used), axle configuration: 2 axles, first registration: 07/2015, suspension: air, tire size: 385/55/22.5, Year of construction: 2015, Tire size: 385/55/22.5 Brakes: disc brakes Suspension: air suspension Dolijuurpwsqm Sbout Rear axle 1: tire profile left: 100%; tire profile right: 100% Rear axle 2: tire profile left: 60%; tire profile right: 60% Dimensions (L x W): 1335 x 2550 cm Technical condition: very good Optical condition: very good Contact Bart Companjen, Giel Companjen, Bertus Companjen or kantoor, office, buro. for more information.

Condition: used, Functionality: fully functional, overall weight: 35,000 kg, empty load weight: 6,015 kg, maximum load weight: 28,985 kg, axle configuration: 3 axles, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, first registration: 03/2021, next inspection (TÜV): 12/2024, suspension: air, color: blue, tire size: 435/50 R19,5", Year of construction: 2021, outer dimension length: 13,850 mm, outer dimension width: 2,550 mm, machine/vehicle number: WFDFLT33902028363, The pictures are archive pictures, the vehicle may still be in use! Dusliqjv Hpccsm Sbst Equipment on request!

Condition: good (used), axle configuration: 3 axles, first registration: 08/2011, suspension: air, Year of construction: 2011, Equipment: ABS, = More options and accessories = - EBS - Lift axle - Air suspension = More information = Suspension: Air suspension Rear axle 1: Lift axle Rear axle 2: Steered Curb weight: 7,100 kg Payload: 31,900 kg GVW: 39,000 kg Technical condition: good Visual condition: good Contact Emad Al Shogran for more information. Vehicle number: Trailer.: 12 Fliegl / BPW / Steering + lift axle / Extendable .: WFDFLT333501001822 German vehicle TÜV: HU: 05.2024 - SP: 11.2023 Dujlouxy Eijiqm Sbjt F.1 Technically permissible total weight in kg: 39,000 G Curb weight:. 7100 Kg Steering + lifting axle PBW axle Extendable = Company information = Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Mobile: Ms. Sabine Faust Email.

Condition: used, overall weight: 35,000 kg, maximum load weight: 27,090 kg, axle configuration: 3 axles, loading space length: 14,750 mm, loading space width: 2,470 mm, loading space height: 2,750 mm, loading space volume: 100 m³, first registration: 05/2022, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Fliegl moving floor +/- 100 cbm, long truck type 1, cargo floor with 21 boards 8 mm, complete emptying (moving front wall), push-in/push-out function, loading pressure gauge, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roll-up tarpaulin, service door at the front, side wall protection tarpaulin, aluminum wear plates inside (wedge-shaped), stainless steel wear plate at the rear under the moving floor, ABS, EBS, SAF INTRA axle(s), disc brakes, air suspension with lifting/lowering device HA, SAF support winches, storage box, vehicle can be covered with advertising and/or labeled Dujliqm Seut An Ujbot Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us!

Condition: used, Year of construction: 2024, tire condition: 99 %, front tire size: 99%, rear tire size: 99%, maximum speed: 40 km/h, Two-axle, turntable_____Fliegl DK 80Demonstrator 13,900€ net2 brake axles, both rigid, track width 1,850 mm2-axle chassisChassis frame galvanized, welded constructionPermissible total weight: 8,000 kgDrawbar with DIN towing eye 40mmOverrun brake - reversing mechanismBridge 4,500 mm x 2,220/2,170 mm (conical), central lockingright, left and rear, corner stanchions pluggable, all-round rubber sealguided in special profile, bridge frame made of high-quality hollow beams, painted nova grayBasic side wall 500mm with grain outlet 400 mm x 230 mmSuperstructure side wall 500 mmSteel side walls (sandblasted, primed and powder-coated in dark green)Parabolic suspensionTires 12.5/80-18 14 PR/load capacity per wheel: 3,000 kg at 40 km/h40 km/h Version with EC type approval and COC papers(wing Dusliqm Sev Em Akobet

Condition: new, overall weight: 11,800 kg, maximum load weight: 8,840 kg, axle configuration: 2 axles, loading space length: 6,200 mm, loading space width: 2,480 mm, loading space height: 900 mm, total width: 2,550 mm, New vehicle Fliegl tandem low loader with ramps type TPS 118 Total weight: 11,800kg Empty weight: 2,960kg Payload: 8,840kg Total length: 8,000mm Loading length: 6,200mm including rear bevel Width: 2,550mm Loading height: 900mm Further information plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 €/ net Chassis central axle trailer Fine-grain steel welded construction Outer frame slightly slanted, new version with "Load-Lock profile" for tensioning belt attachment 3 pairs of lashing eyes outside in the floor, 5 tons each 1 x in the front corners, 1 x in front and 1 x in the rear bevel at the back 6 pairs of lashing eyes outside in the Floor/outer frame, 5 tonnes each Gearbox support foot at the front Foldable rear support 2 wheel chocks with holder Aluminium side impact protection Galvanised steel underrun protection Rear mud flaps across the entire width (not in conjunction with forklift bracket) Quarter-shell mudguard 1 plastic tool box, w=600 / h=425 / d=460 mm, lockable Central axle trailer towing device Towing bar with tested 40 mm towing eye Dueljv E Dqfjiqm Sbjt Towing bar height adjustable via spindle, max. adjustment range 300 mm Axles+suspension GFA or BPW axles as selected by the manufacturer, with tapered roller bearings and S-cam brake "Laser-measured axle/chassis" Reduction in tyre wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical Axle load compensation (rocker compensation) Brake system 2-line compressed air brake system Colored cable routing for easy servicing. Hand spindle parking brake 2 interchangeable coupling heads at the front, with connecting cables to the motor vehicle, 24 volt ABS and ALB, with ABS plug at the front, with connecting cable, Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Wheels and tires 235/75 R17.5 make of choice of the manufacturer Steel rims, factory silver Electrics 24 volt, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front in LED 2 white/red lane keeping lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Steel/checker plate floor for high point load capacity Note: Slight undulation of the floor possible due to welding distortion! Flatbed length approx. 6,200 mm Rear slope to approx. 900 mm Front wall / corner stanchions at the front 25 mm aluminum hollow profile, 400 mm high, Side walls 25 mm aluminum hollow profile, 400 mm high, foldable and removable Center stanchions 1 pair of folding stanchions at side wall height, foldable and removable Rear wall / corner stanchions at the rear 1 pair of steel stanchions attached to the frame and with bracket for locking the loading ramps, entry width approx. 2 430 mm Loading ramps 1 steel ramp 2,300 mm long, 510 mm wide, can be moved sideways with handle on the ramps covered with wood (tip area with steel/checker plate) with gas pressure lift for one-man operation Paint finish Frame DB 7350 Nova gray "10 year guarantee against rust through" Front wall RAL 2002 blood orange Side wall RAL 2002 blood orange Loading ramps hot-dip galvanized Rent-purchase offer: term 48 months, down payment only VAT, residual value 40% Monthly rate EUR 339.00

Condition: excellent (used), axle configuration: 2 axles, loading space length: 7,290 mm, loading space width: 2,500 mm, loading space height: 2,890 mm, first registration: 12/2006, suspension: air, wheelbase: 1,810 mm, color: beige, Year of construction: 2006, Equipment: tail-lift, = Additional Options and Accessories = - Rear Doors = Remarks = WFDFLT218601716 = Additional Information = Axle Configuration Brakes: Disc Brakes Suspension: Air Suspension Dusliqmjur Uxij Sbst Center Axle 1: Dual Tires; Tire Profile Left Inner: 45%; Tire Profile Left Outer: 45%; Tire Profile Right Inner: 45%; Tire Profile Right Outer: 45% Center Axle 2: Dual Tires; Tire Profile Left Inner: 50%; Tire Profile Left Outer: 50%; Tire Profile Right Inner: 50%; Tire tread on the right outer side: 50% Dimensions Dimensions (L x W x H): 735 x 258 x 395 cm Weights Curb weight: 5,440 kg Payload: 12,560 kg GVW: 18,000 kg Functional Tail lift: Dhollandia DHSM, accessible tailgate, 00 kg Body make: TRS Condition Technical condition: very good Visual condition: very good Damage: none Identification License plate: WV-NX-96 = Company information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are without VAT. No rights could be derived from the information provided. Office phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano)Available on What's App and Viber. MOB: Nederlands) Available on What's App and Viber. When you pay by bank transfer, the money needs to be tranfered to our Bank Account underneath. Always check the payment details that are stated on our website. In case you have received other information please contact us. In case you have doubts please call us so we can verify the invoice and/or payment. Bench details: Rabobank Lane of Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/BTW/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: used, overall weight: 38,000 kg, maximum load weight: 30,800 kg, axle configuration: 3 axles, loading space length: 14,715 mm, loading space width: 2,468 mm, loading space height: 2,830 mm, loading space volume: 102 m³, first registration: 03/2022, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Fliegl moving floor +/- 102 cbm, long truck type 1, cargo floor with 21 boards 8 mm, complete emptying (moving front wall), push-in/push-out function, loading pressure gauge, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roll-up tarpaulin, service door at the front, side wall protection tarpaulin, aluminum wear plates inside (wedge-shaped), aluminum wear strips on the end pieces, stainless steel wear plate at the rear under the moving floor, ABS, EBS, SAF axle(s), disc brakes, air suspension with lifting/lowering device HA, support winch(s), storage box, closed side impact protection, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. Dueletun Sceiqm Sbst We would be happy to provide you with a financing or leasing offer for this property. Please contact us!

Condition: new, overall weight: 24,000 kg, maximum load weight: 18,100 kg, axle configuration: 3 axles, loading space length: 8,670 mm, loading space width: 2,500 mm, loading space height: 860 mm, total width: 2,520 mm, New vehicle Fliegl 3 axle low loader trailer with ramps type DTS 300 Vehicle completely hot-dip galvanized Total weight: 24,000kg/ 30,000kg Empty weight: 5,900kg Payload: 18,100/24,100kg Total length: 10,890mm Loading length: 8,670mm total, 2,520mm offset, 6,500mm loading bed Width: 2,520mm Loading height: 860mm Further information plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 €/ net Rent-purchase offer: term 48 months, down payment only VAT, residual value 40% monthly rate EUR 519.00 Chassis low loader trailer Steel Welded construction Pivot bolster with strong ball bearing ring Foldable rear support Wheel chocks with holder Aluminum side impact protection Splash flaps at the rear over the entire width (not in conjunction with forklift bracket) Half-shell mudguard on 1st axle with anti-spray splash flaps Anti-spray splash flaps behind 2nd and 3rd axles 1 plastic tool box, w=600 / h=425 / d=460 mm, lockable Extensions extendable to 3,000 mm (not in the rear bevel) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Djliqm Sov D T Rxebjut Storage compartment for wooden planks in the middle of the loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes for low loader 1 pair of lashing cutouts in the longitudinal beam at the front on a bend, 10 tonnes each. 4 pairs of lashing holes in the outer frame of the crank, each with 5 tons (tension belt attachment) 7 pairs of lashing mushrooms, set into the outer frame at the top and side, each with 10 tons 1 x at the front on the crank 6 x in the low bed First lashing eye 250 mm from the front and last max. 250 mm from the back, distance between the lashing eyes not greater than 1100 mm 5 pairs of ring lashing eyes set into the outer frame, each with 5 tons (can be converted to stake pockets) 2 additional pairs of folding lashing eyes, each with 10 tons 1 x on the crank (protrudes) 1 x set into the ground behind the last axle Towbar with tested 40 mm towbar Towbar height adjustment via spring Axles + suspension Drum brake axles, as selected by the manufacturer "Laser-measured axle/chassis" Reduction in tire wear and tear Fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17.5" at the manufacturer's discretion Steel rims in twin arrangement, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 interchangeable coupling heads at the front, with connecting lines to the towing vehicle, 24 volt ABS and ALB, with ABS plug at the front, with connecting cable Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red lane keeping lights at the rear 2 x 7-pin, interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (light removable) 2 pairs of warning signs with double LED lighting and extendable to 3,000mm Floor Front bend with steel/checker plate covering Storage box embedded in the crossing slope to the bend then with approx. 70 mm softwood floor, steel/checker plate covering in the wheel arch area Rear bevel with 70 mm softwood floor Low loading area including rear bevel 6,500 mm Drive-on ramps Steel ramps 2,800 mm long,

Condition: excellent (used), axle configuration: 2 axles, wheelbase: 8,900 mm, color: grey, Equipment: ABS, Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Empty weight: 6,120 kg Payload: 22,880 kg GVW: 29,000 kg Dimensions (L x W): 1385 x 255 cm Technical condition: very good Visual condition: very good Contact Sales for more information. = Company information = If you have any questions or suggestions, Don't hesitate to contact us. We guarantee an answer within 8 hours. Prices are without VAT. No rights could be derived from given information. Office Phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano)Available on What's App and Viber. MOB: Nederlands) Available on What's App and Viber. When you pay by bank transfer, the money needs to be tranfered to our Bank Account underneath. Always check the payment details that are stated on our website. In case you have received other information please contact us. In case you have doubts please call us so we can verify the invoice and/or payment. Bench details: Rabobank Dueliqmsvz S Ido Sbjt Lane of Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/BTW/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: used, overall weight: 31,000 kg, maximum load weight: 24,200 kg, axle configuration: 2 axles, loading space length: 13,170 mm, loading space width: 2,480 mm, loading space height: 2,860 mm, loading space volume: 93 m³, first registration: 04/2018, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Moving floor +/- 92 cbm, double-wing door with espagnolette lock at the rear, access and standing area at the front of the structure, roll-up tarpaulin, "Cargo Floor" floor with 21 10 mm boards, stainless steel wear plate at the rear under the moving floor, 12 lashing eyes on each side, complete emptying (moving bulkhead), push-in/push-out function, loading pressure gauge, folding rear light protection, cable remote control, ABS, EBS, BPW Eco Plus axle(s), drum brake system, support winches, 1x storage box, vehicle can be covered with advertising and/or labeled Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Duoliqsud E Abem Sbjt Please contact us!

Condition: new, overall weight: 24,000 kg, maximum load weight: 17,900 kg, axle configuration: 3 axles, loading space length: 8,670 mm, loading space width: 2,500 mm, loading space height: 860 mm, total width: 2,520 mm, New vehicle Fliegl 3 axle low loader trailer with ramps, type DTS 300 Vehicle completely hot-dip galvanized Total weight: 24,000kg/30,000kg Empty weight: 6,100kg Payload: 17,900/23,900kg Total length: 10,890mm Loading length: 8,670mm total, 6,500mm low bed including rear bevel / 2,170mm offset Width: 2,520mm Loading height: 860mm Further information plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 ¤/ net Rent-purchase offer: term 48 months, down payment only VAT, residual value 40% monthly rate: EUR 569.00 Steel Welded construction Pivot bolster with strong ball bearing ring Foldable rear support Wheel chocks with holder Aluminum side impact protection Splash flaps at the rear over the entire width (not in conjunction with forklift bracket) Half-shell mudguard on 1st axle with anti-spray splash flaps Anti-spray splash flaps behind 2nd and 3rd axles 1 plastic tool box, w=600 / h=425 / d=460 mm, lockable Extensions extendable to 3,000 mm (not in the rear bevel) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width of 2,550 mm) Storage compartment for wooden planks in the middle of the loading area 70 mm wooden planks for widening to 3,000 mm Lashing eyes for low loader 1 pair of lashing cutouts in the longitudinal beam at the front on a bend, 10 tonnes each. 4 pairs of lashing holes in the outer frame of the crank, each with 5 tons (tension belt attachment) 7 pairs of lashing mushrooms, set into the outer frame at the top and side, each with 10 tons 1 x at the front on the crank 6 x in the low bed First lashing eye 250 mm from the front and last max. 250 mm from the back, distance between the lashing eyes not greater than 1100 mm 5 pairs of ring lashing eyes set into the outer frame, each with 5 tons (can be converted to stake pockets) 2 additional pairs of folding lashing eyes, each with 10 tons 1 x on the crank (protrudes) 1 x set into the ground behind the last axle Deliqmsv D T R Eo Sbout Towbar with tested 40 mm towbar Towbar height adjustment via spring Axles + suspension Drum brake axles, as selected by the manufacturer "Laser-measured axle/chassis" Reduction in tire wear and tear Fuel consumption Air suspension with raising and lowering valve Wheels and tires 235 / 75 R 17.5" at the manufacturer's discretion Twin steel rims, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake Vehicle driving stability system Axle load detection via EBS-Canbus signal, for display on display in the driver's cab, truck must be prepared accordingly, no truck installed (no calibrated scales) 2 interchangeable coupling heads at the front, with connecting cables to the motor vehicle, 24 volt EBS, electronic braking system with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red lane keeping lights at the rear 2 x 7-pin, interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (light removable) 2 pairs of warning signs with double LED lighting and extendable to 3,000 mm Floor Front bend with steel/checker plate covering Storage box embedded in the crossing slope to the bend then with approx. 70 mm softwood floor, steel/checker plate covering in the wheel arch area Rear bev

Condition: used, overall weight: 38,000 kg, maximum load weight: 30,670 kg, axle configuration: 3 axles, loading space length: 13,850 mm, loading space width: 2,480 mm, loading space height: 2,860 mm, loading space volume: 93 m³, first registration: 05/2019, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Moving floor +/- 92 cbm, double-wing door with espagnolette lock at the rear, access and standing area at the front of the structure, roll-up tarpaulin, "Cargo Floor" floor with 21 10 mm boards, stainless steel wear plate at the rear under the moving floor, 12 lashing eyes on each side, complete emptying (moving bulkhead), push-in/push-out function, loading pressure gauge, folding rear light protection, cable remote control, ABS, EBS, BPW Eco Plus axle(s), disc brake system, support winches, 1x storage box, vehicle can be covered with advertising and/or labeled Djliqm Seuf Irujbsut Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to make you a financing or leasing offer for this object. Please contact us!

Condition: new, overall weight: 24,000 kg, maximum load weight: 17,900 kg, axle configuration: 3 axles, loading space length: 8,670 mm, loading space width: 2,500 mm, loading space height: 860 mm, total width: 2,520 mm, NEW VEHICLE Fliegl 3 axle low loader trailer with ramps, type DTS 300 Completely hot-dip galvanized Total weight: 24,000kg/30,000kg Empty weight: 6,100kg Payload: 17,900kg/23,900kg Total length: 10,890mm Loading length: 8,670mm total, 2,170mm offset, 6,500mm loading bed Width: 2,520mm Loading height: 860mm Further information plus pre-freight / provision from storage location 26639 Wiesmoor 1,280.00 €/net Low loader trailer chassis Steel welded construction Turntable with strong ball bearing ring Foldable rear support 2 wheel chocks with holder Side impact protection Aluminum Rear mud flaps across the entire width Half-shell mudguard on 1st axle with anti-spray mud flaps Anti-spray mud flaps behind 2nd and 3rd axles 1 plastic tool box, with shelf, w=620/h=360/d=440 mm, lockable with a padlock. (Lock not included) Extendable extensions to 3,000 mm (not in the rear bevel) (The track width of the construction machines or vehicles to be transported must not exceed the outer frame width 2,550 mm) Storage compartment for wooden planks in the middle of the loading area 70 mm wooden planks for extension to 3,000 mm Lashing eyes for low loader 1 pair of lashing cutouts in the longitudinal beam at the front on a bend, 10 tons each. 5 pairs of lashing holes in the outer frame of the bend, each with 5 tons (tension belt attachment) 7 pairs of lashing mushrooms, set into the outer frame at the top and side, each with 10 tons 1 x at the front on the bend 6 x in the low bed first lashing eye 250 mm from the front and last max. 250 mm from the back, distance between the lashing eyes not greater than 1100 mm 5 pairs of stake pockets set into the outer frame, inside 70 x 40 mm, (can be converted to 5 ton ring lashing eyes, not included in delivery) 2 pairs of additional folding lashing eyes, each with 10 tons 1 x on the bend (protrudes) 1 x set into the ground behind the last axle Towbar device trailer turntable Draw fork with tested 40 mm drawbar Axles + suspension Drum brake axles, as selected by the manufacturer "Axle/chassis laser measured" Lowering of the Tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Wheels and tires 235 / 75 R 17.5" at the manufacturer's discretion Steel rims in twin arrangement, factory silver Brake system 2-line compressed air brake system Spring-loaded parking brake 2 interchangeable coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Make: Wabco or Knorr Caution: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrics 24 volts, multi-chamber lights, yellow LED lighting on the side 2 white position lights at the front 2 white/red lane keeping lights at the rear 2 x 7-pin, non-interchangeable plugs at the front, with connecting cable, 1 LED rotating beacon with holder, switched via parking light (light removable) 2 pairs of warning signs with double LED lighting and extendable to 3,000 mm Floor Front offset with steel/checker plate covering Duolsv D T N Ueiqm Sbst Storage box embedded in the ramp to the offset then with 70 mm softwood floor, steel/checker plate covering in the wheel arch area Rear slope with 70 mm softwood floor Low loading area including rear slope 6,500 mm Drive-on ramps Steel ramps 2,800 mm long, 750 mm wide, can be moved sideways Additional ramp lock can be folded down at the bottom (to preve

Condition: used, overall weight: 38,000 kg, maximum load weight: 30,080 kg, axle configuration: 3 axles, loading space length: 14,715 mm, loading space width: 2,468 mm, loading space height: 2,830 mm, loading space volume: 102 m³, first registration: 05/2022, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Fliegl moving floor +/- 102 cbm, long truck type 1, cargo floor with 21 boards 8 mm, complete emptying (moving front wall), push-in/push-out function, loading pressure gauge, double-wing door with espagnolette lock at the rear, access and standing area at the front of the body, roll-up tarpaulin, service door at the front, side wall protection tarpaulin, aluminum wear plates inside (wedge-shaped), aluminum wear strips on the end pieces, stainless steel wear plate at the rear under the moving floor, ABS, EBS, SAF axle(s), disc brakes, air suspension with lifting/lowering device HA, support winch(s), storage box, closed side impact protection, vehicle can be covered with advertising and/or labeled Doletun Rqoiqm Sbsut Our offer is generally without a new TÜV approval. If a new TÜV approval is required, we would be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply. We would be happy to provide you with a financing or leasing offer for this property. Please contact us!