Used Faymonville Trailers for sale (211)

Condition: new, maximum load weight: 39,670 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available on request. Chjdexarlvspfx Ahyof Gooseneck: * Gooseneck with hardwood flooring approx. 30 mm thick * Rear of gooseneck in straight design * 3 pairs of lashing rings (LC 5,000 daN) Loading Area: * Extendable loading area * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, two rigid axles, two self-steering axles * Air suspension with lift/lower function * Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Drum brakes * Axle tool kit Tyres: * 205/65 R 17.5 * Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 * Data transfer to the tractor unit via the standardised EBS interface as per ISO 11992 * For correct display, the tractor unit must be able to transmit and display these data Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically blasted after welding using a shot blast system * Second blasting with corundum for optimal coating adhesion * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection * Final coating with 2 x 2K topcoat, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL * Wheels in silver * Rear section metallised and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested with salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Electrical System: * Electrical system in compliance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights blink together with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings at the galvanised connection strip up front * Galvanised folding supports beneath the loading area bevel * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * On the gooseneck, plug-in aluminium side and rear boards, approx. 2,440 x 400 mm (L x H) * The rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * Support bracket with 1 pair of WADER container locks. Fifth-wheel load approx. 20,000 kg * 7 pairs of WADER container locks for 1x 20' container in the loading area * 1x 40' container in the loading area, 1x 40' container on the gooseneck, 2x 20' container * 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area * One galvanised bracket running across under...

Condition: used, functionality: fully functional, empty load weight: 10,700 kg, first registration: 06/2015, Year of construction: 2015, FAYMONVILLE Max Trailer F-S44-1A1Y Length: 13,050 mm Width: 2,550 mm Front tire: 235/75R17.5 Rear tire: 235/75R17.5 Wheelbase: 1,360 mm Total permissible weight: 40,000 kg Csdevx R Nhjpfx Ahyjhf Payload: 29,300 kg Empty weight: 10,700 kg Equipment: Cable winch 2" kingpin Operation via 2-pin NATO connector 4 SAF axles 2x steerable ABS Rear support ESB Hydraulic loading ramps (steel ramps) Telescopic Drum brake

Condition: excellent (used), axle configuration: 3 axles, first registration: 07/2016, suspension: air, Year of construction: 2016, Equipment: tail-lift, Suspension: Air suspension Rear axle 1: Steered Chodpfxsvvwzrs Ahyjf Rear axle 2: Steered Rear axle 3: Steered gVW: 48,000 kg Technical condition: Very good Visual condition: Very good Price: On request Please contact David F Middelman for further information.

Condition: ready for operation (used), machine/vehicle number: YAFTL40900001004, maximum load weight: 80,000 kg, overall weight: 105,000 kg, tire size: 70%, wheelbase: 1,360 mm, color: red, Year of construction: 2009, Equipment: ABS, Country of manufacture: Netherlands Body options : Disc brakes, Central lubrication system, Moving floor, Forced steering, Full side opening More information Low loader Pipe carrier, extendable, hydraulic suspension, laterally expandable up to 3500 mm interior and 4200 mm exterior, latest generation pendulum axles Cedpfjvtygfjx Ahyohf Option to incorporate 2-axis dolly to make 2 +4 pipe carrier equipment Load 85 tons We have 2 identical equipment in perfect condition.

Condition: used, axle configuration: 3 axles, first registration: 12/2021, loading space length: 8,550 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75R17.5, wheelbase: 1,350 mm, Year of construction: 2021, Drivetrain Drive: Wheel Axle configuration Tyre size: 235/75R17.5 Suspension: air suspension Rear axle 1: Double wheels Rear axle 2: Double wheels Rear axle 3: Double wheels; Steering Weights Empty weight: 9.350 kg Carrying capacity: 40.150 kg Chedpevu Dwqefx Ahyef GVW: 49.500 kg Functional Make of bodywork: FAYMONVILLE F-S43-1AAF MAXTRAILER Height of cargo floor: 89 cm

Condition: used, empty load weight: 14,760 kg, maximum load weight: 21,240 kg, overall weight: 36,000 kg, axle configuration: 2 axles, first registration: 10/2007, total length: 23,700 mm, suspension: other, color: red, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, - Faymonville STBZ-2VA. - Double extendable to 23.70 m - Year of manufacture: 2007 - Unladen weight (tare): 14,760 kg - Permissible payload: approx. 21,240 kg Chjdpfxew H S Edo Ahyef - Permissible total weight: 36,000 kg - Technically permissible total weight: 38,000 kg - Tyres: size 235/75 R17.5, load index: 141J - Trailer in use; location and inspection upon request - Subject to prior sale and errors! ... VAT deductible

Condition: new, maximum load weight: 38,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the specifications. Full specification available on request. Loading area: * Extendable loading platform with pneumatically operated locking mechanism * Loading area with approx. 30 mm thick wooden planks * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for hooking in tension straps (LC 2,000 daN) Landing legs: * JOST mechanical landing legs with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * Tyres: 385/65 R 22.5, manufacturer at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the truck is via the standardized EBS interface as per ISO 11992. For proper display, the truck must be capable of receiving and showing this data. Axle: * BPW axles and suspension * All axles hydromechanically forced-steered * Disc brakes * Technical axle load: 10,000 kg each (offset 0) * Air suspension with raise/lower valve * Axle tools Brake system: * WABCO brake system in accordance with EU regulations, EBS-E (2S2M) without connection lines to the tractor unit Steel construction: * High-strength fine-grain steel construction * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system in accordance with EU regulations * LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash together with indicators * ASPÖCK-UNIBOX at the front connection bar with 24N, 24S, and 15-pin sockets according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding * Second blasting with corundum for optimal coating adhesion * Final painting with two coats of 2-component topcoat, single color, RAL 3002 Carmine Red according to RAL system 841GL * Rims in silver grey * Rear section metallized and painted RAL 9010 (Pure White) * Metallic paint not available Codpfxjw Tpr Io Ahyehf * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavity sealing with special wax Accessories: * Remote steering from front and rear via cable remote control with push buttons, with axle tracking monitoring (without installation in the tractor unit) * Electro-hydraulic unit * 4 wheel chocks with holders on the front wall * 2" kingpin * Yellow-red air couplings at the galvanized front connection bar * At gooseneck and rear, left and right, brackets for warning panels, including sockets * 10 pairs of stake pockets for approx. 100 x 50 mm plug-in stakes in the external frame of the loading platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the loading area, for 1 x 20' container, 2 x 20' containers, or 1 x 40' container; an additional locking position is provided in the extension for a 45' container * 4 pairs of transverse stake pocket strips in the loading area for approx. 100 x 50 mm plug-in stakes * Storage for max. 9 pairs of plug-in stakes bolted inside to the front wall * Boarding ladder mounted left and right in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted front left under the loading platform * An additional INOX toolbox, approx. 1,200 x 46...

Condition: excellent (used), first registration: 09/2015, loading space length: 20,180 mm, loading space width: 3,000 mm, Year of construction: 2015, YAFTL2007F0017329 = More information = Empty weight: 13,600 kg Payload: 28,400 kg Cjderywukspfx Ahyjhf GVW: 42,000 kg Extendable body: Yes Technical condition: very good Visual condition: very good Damage: none Contact Sales for more information. = Company information = If you have any questions or suggestions, Don't hesitate to contact us. We guarantee an answer within 8 hours. Prices are without VAT. No rights could be derived from given information. Office Phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano)Available on What's App and Viber. MOB: Nederlands) Available on What's App and Viber. When you pay by bank transfer, the money needs to be tranfered to our Bank Account underneath. Always check the payment details that are stated on our website. In case you have received other information please contact us. In case you have doubts please call us so we can verify the invoice and/or payment. Bench details: Rabobank Lane of Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/BTW/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: used, empty load weight: 20,320 kg, maximum load weight: 46,180 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, first registration: 01/2004, tire size: -, Year of construction: 2004, Ref: 2220 Extra low-bed trailer with 3 rear axles + 1 front axle (dolly). Maximum authorized weight: 66 T. Trailer with detachable gooseneck. Extendable trailer (5 m). Trailer with 3 forced steering axles (and manual remote control). Trailer can be driven with or without a dolly. Total trailer length: 16.43 m + 5 m (extendable). Tare weight: 20,320 kg + 2,520 kg for a dolly. Gooseneck: L= 4.43 m. Extra low-bed: L= 7.5 m + 5 m (extendable). Height: 0.5 m. Trailer width: 2.74 m. Dock above rear axles: L= 4.5 m. H= 1.05 m. Dipper pit for excavator dippersticks. Chjdpfswcrzrsx Ahyof Rear ramps. Hydraulic (removable) and hydraulic ramp movement Tow tires: 285/70R19.5 Dolly tires: 235/75R17.5 Serial number: YA9TL366B04113968+122B4113969

Condition: new, maximum load weight: 36,020 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 435/50 R 19.5, color: grey, Equipment: ABS, Loading platform: Loading area in extendable design with pneumatically confirmed locking mechanism 2 pairs of lashing rings (LC 5,000 daN) 1 pair of lashing rings (LC 10,000 daN) 6 pairs of lashing rings can be folded outwards (LC 5,000 daN) 2 pairs of lashing rings can be folded outwards (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps Brake system: Brake system in accordance with EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Paintwork: First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in one color Rear section metallized and painted in RAL 9010 (pure white) Metallic paint is not possible Seat posts: JOST seat posts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: Steel construction made of high-strength fine-grained steels. Steel grades: Cjdji Dwlwepfx Ahyohf S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDICK (ASS3) ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Axles and tires: BPW axles, air-sprung, with disc brakes (377 mm), with lifting/lowering function The self-steering axles with electromagnetic reverse lock can be activated via reverse gear or manually Axle tool. Tires 435/50 R 19.5 Accessories included: Yellow-red air couplings on the galvanized connection strip at the front 2 wheel chocks with bracket 2" kingpin One galvanized steel bulkhead approx. 1,600 mm high. EN12642-XL. Yellow reflector tape in accordance with EU regulations on the side, on the extension and at the rear of the trailer European reflector plates (red/yellow) at the rear of the trailer Loading area with approx. 38 mm thick hardwood floor 10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed 1 spare wheel holder under the cargo bed on the right in the direction of travel Manual and description on USB stick One mud flap at the rear of the trailer A bracket for a rotating beacon at the rear of the trailer A holder for the warning signs on the gooseneck and on the rear panel on the left and right, including a socket One INOX toolbox transversely under the loading area (1,000 x 400 x 2,500 mm) 6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2 x 20ft containers or 1 x 40ft container, an additional locking point is provided in the pull-out for a 45ft container 3 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions Rear speed sticker 60 km/h. 2 reversing lights mounted on the rear panel Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm with a position light A bracket for rotating beacon on the warning signs HRM metallization (High Resistance Metallization) of the outer frame Complete steel construction shot-blasted, then the defined visible surfaces are hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: new, maximum load weight: 33,865 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate delivery or on short notice, on our website. Below is an excerpt from the specification. The full equipment list is available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45° and a rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load area: * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood flooring approx. 48 mm thick, over axles with checker plate covering * Cut-outs in the external frame of the loading platform for attaching tie-down straps (LC 2,000 daN) Axles: * BPW axles and suspension, all axles forced-steered hydro-mechanically * Design axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools included Tyres: * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Braking system: * Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: First-class and durable corrosion protection * High-quality, one-colour 2-component (2K) topcoat in RAL 3002 carmine red * Rear section metallized and coated in RAL 9010 (pure white) Steel Structure: Steel construction from high-strength fine grain steels. * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * 24 Volt lighting ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets, compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Chedpfxew Tprze Ahyjf Including the following additional equipment: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high * Yellow-red air couplings at the galvanized front connection strip * Spare wheel carrier in front of the front wall * Electro-hydraulic unit * Rear and front steering via cable remote control with push-buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mount at the rear of the gooseneck for aluminum loading ramps * Removable aluminum ramp hanging rail at the rear of the vehicle * Galvanized folding supports beneath the slope of the load area * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * The rear galvanized stanchions are removable (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the loading area for one 20', two 20', one 40' or one 45' container * 8 pairs of stanchion pockets (approx. 100 x 50 mm) in the external frame of the loading platform * Galvanized extensions, extendable by approx. 230 mm per side * Adjustable hanging rails for aluminum ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, filled with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM Metallization (High Resistance Metallisa

Condition: excellent (used), first registration: 06/2007, color: white, Year of construction: 2007, Equipment: ABS, YAFTL707000006645 = Further information = GVW: 1,000 kg Extendable body: Yes Technical condition: very good Visual condition: very good Contact Sales for further information. = Company information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee an answer within 8 hours. Prices are without VAT. No rights could be derived from given information. Office Phone: MOB: Nederlands - English - Deutsch - Francais - Español - Italiano)Available on What's App and Viber. Chjdpov Rq Ihefx Ahysf MOB: Nederlands) Available on What's App and Viber. When you pay by bank transfer, the money needs to be transferred to our bank account underneath. Always check the payment details that are stated on our website. If you have received other information, please contact us. In case you have doubts please call us so we can verify the invoice and/or payment. Bench details: Rabobank Lane of Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/BTW/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: new, empty load weight: 6,350 kg, maximum load weight: 38,650 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Loading area: -2 pairs of lashing rings can be folded outwards (LC 5,000 daN) 24 pairs of cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN) Seat posts: -JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles, air-sprung, with disc brakes (430 mm), with lifting/lowering function -385/65 R 22.5 tires Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (2S2M) Paint finish: -First-class and long-lasting corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey -Rear part metallized and painted in RAL 9010 (pure white) -No metallic paint finish possible Steel construction: -steel construction made of high-strength fine-grained steels -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690Mpa) Electrical system: -Electrical system according to EU regulations -Lighting 24 Volt -ASPÖCK-NORDIK (ASS3) -ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets -Connection according to ISO. -24N ISO-1185 -24S ISO-3731 -15-pin ISO-12098 Chjdpfxoiu Etkj Ahyof Accessories included: -Yellow-red air couplings on the galvanized connection strip at the front -4 pieces of restraining shoes with bracket -2" kingpin -One galvanized steel end wall approx. 1,600 mm high. EN12642-XL -White reflector tape in accordance with EU regulations on the side of the trailer and red at the rear -European reflector plates (red/yellow) at the rear of the trailer -Loading area with approx. 30 mm thick hardwood floor edged in omega profiles -10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -3 pairs of stanchion pocket rails, mounted transversely in the cargo bed, for 100 x 50 mm stanchions -Storage for 1,000 mm stanchions, at the rear in the central support -1 Spare wheel holder under the cargo bed on the right in the direction of travel -One mud flap at the rear of the trailer -Manual and description on USB stick -One bracket for a rotating beacon at the rear of the trailer -One bracket for the warning signs on the gooseneck and on the rear panel on the left and right, including socket -6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2x 20ft containers or 1x 40ft container. Flush with the rear -Speed stickers 80 km/h at the rear and on both sides -Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with one LED position light -Load manometer for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, maximum load weight: 61,050 kg, overall weight: 73,000 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment. Full equipment list available upon request. Loading Platform: * Loading platform with approx. 30 mm thick hardwood floor * 10 pairs of folding external lashing rings (LC 10,000 daN) Landing Legs: * JOST landing legs (mechanical) with two-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles and Suspension: * BPW axles, technically rated at 12,000 kg each * 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered, mounted on turntable * Air suspension with raise/lower valve * Axle tools Tyres: * Tyres 445/65 R 22.5 169K – manufacturer of our choice TPMS * TPMS tyre pressure monitoring system according to ECE R 141 * Data transmission to tractor unit via standardised EBS interface according to ISO 11992 * For correct display, the tractor unit must be able to process and display this data Brake System: * Wabco brake system as per EU regulations with EBS-E (4S/3M) without connecting lines to the tractor unit Electrical System: * Electrical system in accordance with EU regulations * Lighting 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Paintwork: * Entire steel construction automatically blasted after welding using a shot-blasting machine * Second blasting with corundum for optimal coating adhesion * HRM metallisation of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure optimal corrosion protection * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red as per RAL System 841GL * Rear section metallised and painted in RAL 9010 (Pure White) Codew Tpr Ujpfx Ahyshf * Rims in silver grey * Paint system tested by salt spray test according to ISO 9227-NSS * Cavities sealed with special wax * Metallic paint finish not possible Including the following accessories: * Loading platform with approx. 30 mm thick hardwood floor * 2-inch kingpin * One galvanized steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings on the galvanized front connection rail * Storage for approx. 1,000 mm long insertable stanchions in the rear central beam * At the gooseneck and rear plate, left and right, one bracket each for warning signs including socket * Remote steering from front and rear via cable remote control with push-buttons, with single-track monitoring of the axles (no installation in the tractor unit) * Electro-hydraulic unit * 13 pairs of stanchion pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Lift axle on 1st and 2nd axle with control via TEBS E depending on current axle load and loading status * 7 pairs of galvanized insertable stanchions, approx. 100 x 50 mm, approx. 1,000 mm high * 5 pairs of crosswise stanchion pocket strips mounted on the loading platform for stanchions approx. 100 x 50 mm * 2 pairs of WADER container pockets in the loading platform, for 1x10' * 1 shunting coupling with reinforcement bolted to the rear crossmember * Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2

Condition: new, empty load weight: 8,300 kg, maximum load weight: 36,700 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, loading space height: 1,080 mm, suspension: air, tire size: 385/65 R 22.5, color: grey, Equipment: ABS, tail-lift, Cargo bed: Cargo bed in extendable design with pneumatically operated locking mechanism Cut-outs in the outer frame of the cargo bed for attaching tensioning straps Seat posts: JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load Axles and tires: BPW axles, air-sprung, with disc brakes (430 mm), with raise/lower function The self-steering axle with electromagnetic reverse lock can be activated via reverse gear or manually Axle tool 385/65 R 22.5 tires Brake system: WABCO brake system in accordance with EU regulations with EBS-E Paint finish: First-class and long-lasting corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 Metallic paint is not possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC S690QL/S700MC Electrical system: Electrical system according to EU regulations Lighting 24 Volt ASPÖCK-NORDIK ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO Accessories included: Yellow-red air couplings on the galvanized connection strip at the front One galvanized steel end wall approx. 1,600 mm high. EN12642-XL 4 restraint shoes with bracket White reflective tape in accordance with EU regulations on the sides, on the extension and at the rear in red European reflector plates at the rear of the trailer Loading area with approx. 30 mm thick hardwood floor edged in omega profiles 10 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed 1 spare wheel holder under the cargo bed on the right in the direction of travel Manual and description A bracket for a rotating beacon at the rear of the trailer A holder for the warning signs including socket on the gooseneck and on the rear plate on the left and right respectively Chjdpfx Ahsikyh Hoysf A layer of sand painted onto the central beam to prevent slipping 6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2x 20ft containers or 1x 40ft container in the pull-out, an additional locking point is provided for a 45ft container 4 pairs of stanchion pocket rails, mounted transversely in the loading area, for 100 x 50 mm stanchions One galvanized bracket transversely under the cargo bed 2,390 x 720 x 400 mm Access ladder mounted on the right in the direction of travel Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Load manometer for determining the axle loads including load diagram HRM metallization of the outer frame Complete steel construction shot-peened, then the defined visible surfaces hot-finished in metallization with ZINACOR 850

Condition: new, maximum load weight: 38,140 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Codjw Tpq Djpfx Ahyjhf Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: new, empty load weight: 14,650 kg, maximum load weight: 63,350 kg, overall weight: 78,000 kg, axle configuration: > 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 850 mm, tire size: 245/70 R 17.5, color: green, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm -Rear gooseneck with bevel approx. 1,000 mm x 10° Chedpfjrvw U Sox Ahyef Cargo bed: -Telescopic loading area, length approx. 8,800 mm, with rear chamfer approx. 500 mm x 10° -Depression in the chamfer and protruding into the loading area to accommodate the excavator dipper arm -Pneumatic locking with conical bolts and reinforced locking positions Ramps: -1 Pair of two-part steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm -Hydraulically folding ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards Axles, suspension and tires: -SAF ∗∗TWINAXLE II∗∗ with independent wheel suspension, 1st axle with self-tracking steering, all other axles with hydro-mechanical forced steering -1st axle with electro-magnetic reverse lock via reverse gear and can be activated manually -Hydraulic axle compensation, hydraulic cylinders with shut-off valves -Twin tires 245/70 R 17.5 3PMSF Surface treatment: -Complete steel construction automatically blasted after welding with blast wheel system -second blasting with corundum for optimum adhesion of the coating system -HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminium) to ensure the best corrosion protection -Finishing coat with 2 layers of 2K top coat, single color in nova grey -Paint structure tested in the salt spray test according to ISO 9227-NSS -Sealing of wooden areas with special wax Accessories included: -steel front wall, plug-in, approx. 400 mm high -3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches -On the gooseneck 1 pair of plug-in ALU side panels, approx. 400 mm high, anodized -On the gooseneck, one plug-in ALU rear panel, approx. 400 mm high, anodized -Over the gooseneck approx. 40 mm thick hardwood covering, checker plate covering over the kingpin -Guide plate from the gooseneck for the saddle plate, approx. 500 mm wide -Continuous 8/10 checker plate covering on the loading area -Locking of the cargo bed with conically welded locking profiles every 250 mm -Widenings (galvanized) extendable by approx. 230 mm per side -1 pair of fixed wheel recesses open up to the extension in the cargo bed in front of the 1st axle -Wheel recesses with sheet metal covering and square climbing strips 15 x 15 mm, approx. every 200 mm -1 pair of fixed wheel recesses in the cargo bed between the 1st and 2nd axle -Wheel recesses with square climbing strips 15 x 15 mm and widenings in the lower area -ALU covers for the wheel recesses between the 1st and 2nd axles, which can also be used as widening planks -Aluminum elements designed to lock onto the extension tubes of the extensions -Control valves for the hydraulic ramps on the right-hand side of the vehicle -1 pair of mechanical rear supports -Central lubrication system with 1 pump, BEKAMAX brand -Steering can be operated from the front and rear by remote control cable via pushbuttons, with toe-in control of the axles -Hardwood covering on the bevel of the loading area -Radio remote control for post-steering, in addition to the cable remote control, with 2 LED indicator lights on the receiver as toe-in control. -WABCO Smart Board System. -4 warning signs, approx. 423 x 423 mm, extendable by approx. 1,000 mm, incl. 2 position lights and brackets for rotating beacon

Condition: new, maximum load weight: 50,400 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment specifications available on request. GOOSENECK * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connector strip with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized finish * 1 removable aluminum tailgate, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor above gooseneck, checker plate floor above king pin * 2-inch king pin * Rear section of gooseneck prepared for aluminum drive-on ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform and bevel for accommodating excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st axle steerable, all remaining axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lockout, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with raise and lower valve * Tires: 235/75 R 17.5, twin tires, 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Continuous 50 mm thick hardwood floor on the loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions, approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm ahead of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, usable as bridging elements for extension OR as widening planks * Aluminum elements lockable on telescopic tubes of the extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening planks * Aluminum elements lockable on the extension’s telescopic tubes * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-section steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm in length and approx. 900 mm wide each * Hydraulically foldable ramp tips * Ramps can be shifted hydraulically approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber surface approx. 25 mm and steel plate surface approx. 5 mm as additional Chjdpfx Ahetx Nwnsyjf

Condition: new, empty load weight: 11,400 kg, maximum load weight: 36,600 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 13,100 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17,5, color: grey-black, Equipment: ABS, Gooseneck: - Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm - Rear gooseneck with bevel approx. 1,000 mm x 6°. - Technical fifth wheel load: 18,000 kg - For SZM: 4 x 2 or 6 x 2 Loading area: - Loading area, length approx. 9,400 mm, with rear chamfer approx. 900 mm x 6°. - Loading platform after the gooseneck, can be raised and lowered hydraulically. - Loading platform length approx. 3,000 mm. Loadable up to approx. 9,000 kg Ramps: - 1 pair of two-part hydraulic steel ramps, approx. 4,350 x 900 mm. - Hardwood decking. - Hydraulically folding ramp tips. - Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 365 mm inwards. Axles and suspension: - BPW axles and suspension, two axles rigid, one axle self-steering. - Technical axle load: 12,000 kg - Electromagnetic reverse lock via reverse gear and manual activation. - Air suspension with lifting and lowering valve. - Axle tool. Tires: - 235/75 R 17.5 3PMSF dual tires. Chedpfx Ajiuy Npehyjf - Load index 143/141J (144/144F) Brake system: - WABCO EBS-E braking system in accordance with EU regulations. Lighting system: - 24-volt lighting system in "ASPÖCK-NORDIK full LED" (ASS 3) - Design in accordance with EU regulations. Metallization: - Standard HRM metallization (High Resistance Metallization) of the outer frame. - Complete steel construction shot-peened, then the defined visible surfaces metallized with - metallization with ZINACOR 850 (zinc 85% - aluminium 15%). Painting: - 6-K final treatment: - Complete steel construction shot-blasted after welding. - One coat of zinc-based primer, one coat of adhesion primer. - Final coat with 2 layers of 2-component paint (acrylic) in one color in nova grey, followed by sealing of the cavities with special wax. Rims in silver. Steel construction: - Steel construction made of high-strength fine-grain steels. - Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welder DIN-EN 287-1 tested. MAG welding process according to EN ISO 4063. Shielding gas M21 according to EN ISO 14175 Accessories included: - Steel end wall, pluggable, approx. 400 mm high. - Connection strip for supply lines to the SZM, attached at the height of the outer frame profile. - ASPÖCK-UNIBOX on the connection strip at the front with 24N, 24S & 15-pin sockets. 24N connection in accordance with ISO-1185 24S connection in accordance with ISO 3731 15-pin connection in accordance with ISO-12098 - 1 spare wheel with mounting adapter under the cargo bed on the right in front of the axles. - Parking position on the gooseneck for the warning signs when not in use. - Outer support of the gooseneck with fastening holes for screwable lashing rings. The first hole approx. 200 mm from the front, then approx. every 400 mm. 2 pairs of screw-in lashing rings included (LC 5,000 daN). - One fastening hole in the rear upper area of the outer beams of the gooseneck for a screw-in lashing ring. 1 pair of screw-in lashing rings included (LC 10,000 daN). - 1 pair of recessed lashing rings at the rear in the middle of the gooseneck (LC 5,000 daN). - 3 pairs of recessed lashing rings inside on the outer beam of the gooseneck (LC 5,000 daN) - 3 pairs of lashing rings in the middle of the gooseneck for (LC 5,000 daN). - Approx. 40 mm hardwood planking above the gooseneck. - 2" kingpin - On the gooseneck, 1 pair of plug-in aluminium side plates, approx. 400 mm high, in anodized finish. - On the gooseneck, one plug-in aluminum

Condition: new, maximum load weight: 35,060 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment features. Complete specifications available on request. GOOSENECK * Gooseneck designed as a loading platform with aluminum checker plate covering * Hydraulic lifting rocker, approx. -280/+250 mm, can be raised and lowered * Two kingpin positions at approx. 2,300 mm and approx. 2,000 mm * For tractor units: 4x2, 6x2, or 6x4 * 2-inch kingpin * 3 pairs of recessed lashing rings on the gooseneck (LC 6,300 daN) * ASPÖCK UNIBOX on the front connection panel with 24N, 24S, and 15-pin sockets; 24N connection according to ISO 1185, 24S connection according to ISO 3731 * 15-pin connection according to ISO 12098 * Yellow-red air couplings on the front connection panel * Lighting for operation of the gooseneck, suspension, and hydraulic bracing with on/off switch * Boom for suspending supply lines on the front of the gooseneck * All work lights in the gooseneck area operated via on/off switch on the gooseneck LOADING AREA * Loading well, approx. 9,500 mm long, with angle profiles mounted underneath for loading pallet support (distance from kingpin to axle center approx. 8,000 mm) * BPW stub axles with drum brakes and independent suspension, hydraulic axle compensation with lifting and lowering function * Tires: 385/65 R 22.5 (M+S) * Mechanical drop-leg supports for approx. 48,000 kg support load * Access ladder mounted front right, with 2 removable handrails * Detachable full coverings on both sides in front of the axle assembly * WABCO Roll Stability Support (RSS) * 9 pairs of lashing rings (LC 6,300 daN) on the longitudinal beams * Grating support on the longitudinal beams, flush with integrated load securing guide rails * First and last axle manually liftable (left and right) * Storage boxes behind the axle assembly on left and right, splash-water protected * Rear chamfer for easier insertion of pallets * Lashing eyes at the end traverse for mechanical bracing * Rear door with cross-bracing, hinged on the left and hydraulically locked on the right, can be secured horizontally at 90°, 105°, and 270° * Underride guard foldable upwards for transporting up to 4 empty standard pallets * Number plate holder with lighting on the rear door * A 7-pin socket on the end traverse * Electro-hydraulic unit for operating hydraulic functions (without installation in the tractor unit) * TPMS tire pressure monitoring sensors installed on all wheels, including spare wheels * Control lights indicating nominal ride height in the vehicle control area * 1 odometer mounted on the left * 2 axle load gauges with axle load diagram mounted on the left * 2 rubber buffers at the front of the loading channel as stops for the pallet * Hydraulic preparation including controls for mounting 4 pairs of our hydraulic load securing systems * 1 spare wheel holder on the right (in the direction of travel) * EU reflector at the rear of the vehicle * Acoustic reversing warning signal * Round NATO socket on the front connection panel (Maeler & Kaege VG 96 917) BRAKE SYSTEM: * WABCO EBS brake system in accordance with EU regulations. WITHOUT connecting cable to tractor unit Chjdswx Dc Hopfx Ahyef LIGHTING SYSTEM: * 24-volt lighting system in ASPÖCK-NORDIK full LED version, compliant with EU regulations (ASS 3) SURFACE TREATMENT HRM metallization

Condition: new, empty load weight: 10,000 kg, maximum load weight: 41,600 kg, overall weight: 51,600 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Loading area: -Gooseneck, length approx. 4,100 mm with central support -Loading area in extendable design, length approx. 9,500 mm with bevel at the rear approx. 350 mm x 10° and integrated hanging bar for attaching loose aluminum loading ramps -Pneumatic locking with conical locking bolts and reinforced locking positions -The supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Axles, suspension and tires: -BPW axles and suspension, all axles hydro-mechanically forced steered -Mounted on a turntable -Technical axle load: 12,000 kg -Air suspension with raising and lowering valve -Tires 235/75 R17.5 twin tires Paint: -6-K final treatment -Complete Steel construction shot blasted after welding -One layer of zinc-based base paint, one layer of primer -Final coating with 2 layers of 2-component paint (acrylic) in one color in MB 7350 Nova gray, then sealing of the cavities with special wax Steel construction: -Steel construction made of high-strength fine-grain steel -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) -Welder tested according to DIN-EN 287-1 -MAG welding process according to EN ISO 4063, M21 protective gas according to EN ISO 14175 Accessories: -Front wall made of steel, approx. 1,600 mm high -Round NATO socket on the front connection strip -3 kW electro-hydraulic unit for controlling the Hydraulic processes -4 pairs of recessed lashing rings in the outer frame of the gooseneck -4 pairs of stake pockets embedded in the outer frame of the gooseneck, for stakes approx. 100x50 mm -1 stake pocket strip mounted transversely in the loading floor of the gooseneck, for stakes approx. 100x50 mm (1x at the back of the gooseneck) Chjdpoiuy Nlofx Ahysf -2" king pins -Mechanical seat supports with 2-speed gearbox and crank -JOST module B - static test load = 50,000 kg -Approx. 32 mm wooden floor on the gooseneck and the loading area, framed in ALU omega profiles -A locking point on the extension, approx. every 500 mm -10 pairs of recessed lashing rings lying in the outer frame of the loading area, foldable outwards -6 pairs of stake pockets embedded in the outer frame of the loading area, for stakes approx. 100x50 mm -2 stake pocket strips mounted across the loading floor of the loading area, for stakes approx. 100x50 mm -Inox toolbox approx. 1,250 x 500 x 550 mm -Bevel on the vehicle's end crossbar, approx. 350 mm 10° -Integrated hanging strip for loose aluminum docking ramps on the vehicle's end crossbar -1 pair of downpipe supports on the end crossbar -Fenders on all axles -Central lubrication system with 1 pump -Steering can be operated from the front and rear using a cable remote control via push button, with alignment control of the axles -Under the gooseneck and at the back of the end crossbar, a 7-pin socket for warning signs on the left and right -A 7-pin socket on the end crossbar -Container locks "TWIST-LOCKS" in the loading area for transporting 2x 20ft - and 1x 40ft containers -Radio remote control for the steering in addition to the cable remote control, with 2 indicator lights on the receiver as a lane control -2 axle load gauges + axle load diagram -4 warning signs approx. 423 x 423 mm extendable by approx. 400 mm -Standard HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% -

Condition: new, maximum load weight: 39,720 kg, overall weight: 50,960 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Sample equipment features. Full specification upon request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading Platform Loading platform in extendable design Cjdpfeu Sd U Uox Ahyjhf * 5 pairs of fold-out outer lashing rings (LC 5,000 daN) * 3 pairs of fold-out outer lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over axles with chequer plate covering Landing Gear * JOST (mechanical) with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles * BPW axles: 2 fixed axles, 2 steering axles, drum brakes * Air suspension with lift/lower function * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco brake system in accordance with EU directives with EBS-E (4S3M), without interconnecting lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-color, RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories Included * 2-inch king pin * Galvanized front steel bulkhead approx. 400 mm high * Spare wheel holder in front of bulkhead * Yellow-red air couplings on galvanized connector bar front * 4 wheel chocks with holder at bulkhead * Bracket at rear of gooseneck for aluminum loading ramps * Galvanized folding supports under inclined edge of loading platform * Holder for beacon at rear of trailer * Yellow reflective tape on sides, extension, and rear in accordance with EU regulations * Brackets for warning signs with socket on both sides at the gooseneck and rear panel * TPMS tire pressure monitoring system per ECE R 141. Data transmission to the tractor unit via standardized EBS interface according to ISO 11992; for correct display, the tractor unit must support data transmission and display * Plug-in aluminum side walls and tailgate on gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * Galvanized toolbox, integrated in gooseneck slope * 6 pairs of WADER container locks in loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container * Sliding mounting rails for aluminum ramps at rear of vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform * Galvanized cross bracket under the loading platform * Galvanized extendable widenings, extendable approx. 230 mm per side * Lift axle on front axle, controlled via TEBS E according to current axle load and load status * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)

Condition: new, maximum load weight: 67,200 kg, overall weight: 85,000 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpts from the equipment. Full specifications available upon request. GOOSENECK * Gooseneck in SNT design to optimize load floor length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractors: 6 x 2, 6 x 4, and short 8 x 4 * Detachable steel front wall, approx. 400 mm high Codpfxorgzv Nj Ahyshf * 3 kW electro-hydraulic power unit for controlling hydraulic functions, except for hydraulic winches * Outer beams of the gooseneck with mounting holes for bolt-on lashing rings * 2 pairs of screw-in lashing rings included (LC 5,000 daN) * 1 pair of flat lashing rings at the rear of the gooseneck (LC 10,000 daN) * 1 pair of plug-in aluminum side boards, approx. 400 mm high, anodized * 1 plug-in aluminum rear board, approx. 400 mm high, anodized * Approx. 40 mm thick hardwood flooring above gooseneck, checker plate flooring above kingpin * 3.5 inch kingpin * Gooseneck guide plate for the fifth wheel plate, approx. 500 mm wide * Round NATO socket at the front connection strip (Maeler & Kaege VG 96 917) * In addition to the electro-hydraulic unit, a truck hydraulic connection with flow regulator, including bracket for hanging supply lines (Faymonville couplers) * 2 pairs of stake pockets recessed in the gooseneck, for plug-in stakes approx. 100 x 50 mm LOAD FLOOR * Extendable load floor, approx. 11,000 mm long, with rear bevel approx. 500 mm x 10° * Pneumatic locking with conical locking bolts and reinforced locking positions; supply lines are protected inside the extendable beams and automatically adjust to the respective deck length * BPW axles and suspension, 1st axle steered, 2nd axle fixed, all other axles hydro-mechanically forced steered * 1st axle with electro-magnetic reverse lock via reverse gear and manual activation * Axle load capacity: 12,000 kg each * Air suspension with lift and lower valve * 235/75 R 17.5 3PMSF twin tires * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B – static test load = approx. 50,000 kg * Continuous and, between axles, interrupted approx. 50 mm thick hardwood floor on load deck (increases coefficient of friction) * Slotted holes for attachable and repositionable bridging elements: – at the fixed part behind the gooseneck – on the front of the load floor * 1 sliding intermediate table, approx. 500 mm wide, for the sliding tube with large cross-section, checker plate flooring, front and rear with slotted holes for attachable and repositionable bridging elements * 1 pair of recessed flat lashing rings in the front fixed part of the load floor (LC 10,000 daN) * 9 pairs of recessed lashing rings, foldable outward, in the load floor perimeter frame (LC 10,000 daN) * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking control, no installation required in the tractor * 1st axle with automatic lift axle function and start-up assist according to EU Regulation 2021/535 * Under the gooseneck and at the rear cross member, left and right, a 7-pin socket each with holder for warning signs * Factory-applied sand coating on the perimeter frame of the load floor as well as the checker plates and the transition area between load decks

Condition: new, maximum load weight: 34,660 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete stock of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment. Full equipment details available upon request. Loading Platform * Double extendable version with pneumatically operated locking mechanism * 2 pairs of recessed lashing rings (LC 5,000 daN) * 1 pair of recessed lashing rings (LC 10,000 daN) * 7 pairs of outward-folding lashing rings (LC 5,000 daN) * 3 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for hooking in tension belts (LC 2,000 daN) Landing Legs * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Tyres * 235/75 R 17.5 3PMSF Axles * BPW axles hydro-mechanically forced steered * Air suspension with lift and lower valve Braking System * According to EU regulations, with EBS-E (2S2M), without connection lines to the tractor unit Steel Construction * Made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork * Premium and durable corrosion protection for the standard shot-blasted welded frame provided by a 2-component (2K) zinc-rich primer * High-quality 2-component (2K) top coat, single color in RAL 3002 carmine red * Rear section metallized and painted in RAL 9010 (pure white) * Rims in silver Including Accessories * Remote steering from front and rear via cable remote control with push buttons, with single-track control (no installation in tractor unit) * Electro-hydraulic power unit * 4 wheel chocks with holder mounted on the front wall * 2-inch kingpin * Yellow-red air couplings on the galvanized connection strip at the front * Yellow reflective tape according to EU regulations on the sides, extension, and rear of the trailer * European reflective signs (red-yellow) on the trailer's rear * One mudflap on the trailer's rear * Manual and instructions on USB stick * Loading platform with robust hardwood floor * 10 pairs of stake pockets for 100 x 50 mm plug-in stakes on the outer frame of the loading platform * Mounting bracket for a revolving beacon on the trailer's rear * Galvanized supports under the inclined section of the loading platform * Mounting bracket for a revolving beacon on the trailer's rear * Hook-in rail for ALU access ramps at the rear of the vehicle * 80 km/h speed stickers on the rear and both sides * Load gauge for determining axle loads including load chart * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * Central lubrication system with 2 BEKAMAX (Pico) pumps with standard grease NLGI-2 and removable pump protection cover * Spiral cable supplying the electro-hydraulic unit and/or the electric winch (approx. 35 mm², approx. 3.5 m long, max. 250 A) between trailer and tractor unit with connector (NATO-NATO) * Coated sand layer on the central beam as anti-slip protection * 6 pairs of WADER container pockets in the loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container, an additional locking point is provided in the extension for a 45' container * 5 pairs of crosswise stake pocket rails mounted in the loading platform, for 100 x 50 mm plug-in stakes Chjdpfek Ugacex Ahysf * Storage for up to 9 pairs of plug-in stakes, approx. 100x50 mm, inside on the front wall * One INOX toolbox, approx. 1,500 x 390 x 810 mm, mounted under the loading platform left and right in the direction of trav

Condition: new, maximum load weight: 91,640 kg, overall weight: 126,000 kg, axle configuration: > 3 axles, total width: 2,850 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Cedpfx Aheuvbdteyshf Excerpt from the equipment features. Full specification available upon request. Gooseneck * Hydraulically liftable/lowerable and detachable gooseneck. Length approx. 3,650 mm. Suitable for tractor units: 6 x 4 or 8 x 4 3-Axle Compact Front Bogie * Hook couplings front and rear, length: approx. 3,560 mm * Chassis width: approx. 2,850 mm Excavator Deck * Telescopic excavator deck BB-A with drive-over deck hooks at the front and a bolt coupling at the rear * Base width: approx. 2,850 mm, Length: approx. 7,150 mm, Main beam height: approx. 430 mm, Main beam width: approx. 1,350 mm * Loading height approx. 580 mm with ground clearance approx. 150 mm 5-Axle Rear Bogie * Mechanical bolt coupling for front connection of a low-bed, rear end traverse * Chassis width: approx. 2,850 mm * Chassis length: approx. 6,840 mm * 3-axle pendulum axle Front Bogie * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and stopper pins for securing in raised position * Axles finished with 2 layers of MB7350 Novagrau single-colour 2-component paint * Technical axle load: 14,640 kg per axle (62 km/h) * Hydraulic axle compensation * Front bogie tyres: 12 x Manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J, pendulum axle 5-Axle Rear Bogie * PENDULUM AXLE, all axles hydro-mechanically forced-steered * Hose rupture valve on axle compensation cylinder with automatic RESET function * Hydraulic cylinders with shut-off valves and stopper pins for securing in raised position * Axles finished with 2 layers of MB7350 Novagrau single-colour 2-component paint * Technical axle load: 14,640 kg per axle (62 km/h) * Hydraulic axle compensation * Rear bogie tyres: 20 x Manufacturer’s choice (M+S) 285/70 R19.5, load index 150/148J Paintwork * HRM metallization of the entire vehicle chassis using ZINACOR 850 (85% zinc/15% aluminium) to ensure the best possible corrosion protection * Final coat with two layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, according to the RAL System 841GL. Rims in silver grey Incl. Accessories * Steel front wall, approx. 400 mm high * Detachable ALU side walls and rear wall approx. 400 mm high in anodized finish, mountable on the gooseneck * 3.5" kingpin * BEKA-MAX central lubrication system for one gooseneck * Multi-coupling hydraulic connections on the gooseneck * BEKA-MAX central lubrication system for one 3-axle bogie * One 7-pin socket left and right rear on the front bogie for warning signs * Screw-in option (ø approx. 40 mm) every approx. 500 mm on the outside of the upper flange of the external tube of the excavator deck for lashing rings (LC 16,000 daN) * Folding extensions with steel mattress, width adjustable from approx. 2,850 mm to approx. 3,250 mm * Steel mattresses can be positioned in 2 ways to achieve a lowered loading platform. Load capacity depends on extension, refer to the respective load chart * Steel mattresses with rubber flooring approx. 12 mm thick * One 7-pin socket left and right, front and rear of the rear bogie for warning signs * BEKA-MAX central lubrication system for one 5-axle bogie * Socket on the rear bogie for cable remote control of rear steering * Rear bogie with trough * Two INOX toolboxes, approx. 855 x 340 x 390 mm, mounted on the goos