Used Stas Sz Semitrailers for sale (134)

Condition: used, Year of construction: 2017, Equipment: ABS, = Further options and accessories = Coln Hovg Indjhd Rsrb - Electronic braking system (EBS) = Further information = CE marking: yes Seriennummer: YE6S300ZXH0000870

Condition: used, axle configuration: 3 axles, wheelbase: 9,440 mm, first registration: 09/2018, suspension: air, tire size: 385/65R22.5, Year of construction: 2018, Axle Configuration Tire Size: 385/65R22.5 Axle Brand: SAF Brakes: Disc Brakes Suspension: Air Suspension Coln Hov Un U Tehd Rsrb Rear Axle 1: Max. axle load: 9000 kg; Left Tire Tread: 60%; Right Tire Tread: 60% Rear Axle 2: Max. axle load: 9000 kg; Left Tire Tread: 70%; Right Tire Tread: 70% Rear Axle 3: Max. axle load: 9000 kg; Left Tire Tread: 50% Tire tread right: 50% Dimensions Dimensions (L x W): 1400 x 255 cm Weights Unladen weight: 7,860 kg Payload: 34,140 kg GVW: 42,000 kg Maintenance General technical inspection (APO): inspected until November 2025 Identification License plate: OV-27-NL Further information For further information, please contact Frank van Rooij, Mark van der Steen, Maarten Bruisten, or Bob Beukers.

Condition: used, overall weight: 43,000 kg, empty load weight: 6,700 kg, maximum load weight: 36,300 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 30 m³, first registration: 08/2005, next inspection (TÜV): 03/2025, suspension: air, tire size: 385/65 R22.5, Year of construction: 2005, Equipment: ABS, German vehicle STAS 3-axle aluminum tipper, approx. 30 m³ Type: SA343 K Crsln Hevz Tzxshd Rob BPW Eco Plus axles 2x lift axles (1 + 3 axles) Air suspension Full aluminum (tip + chassis) GVW: 43,000 kg EC: 6,700 kg NL: 36,300 kg Tire size: 385/65 R22.5 Further service available! Export license plate (red / 30 days) German Short-term license plate (yellow / 5 days) German Austrian transfer license plates can be arranged Vehicle deliveries (for a fee) The information provided online is non-binding. They do not represent guaranteed properties. The seller is not liable for errors, input errors, or data transmission errors. Subject to prior sale. Sale to businesses only. Our terms and conditions apply exclusively

Condition: new, overall weight: 36,000 kg, maximum load weight: 28,530 kg, axle configuration: 3 axles, loading space width: 2,325 mm, loading space height: 2,285 mm, loading space volume: 48 m³, Year of construction: 2023, Equipment: ABS, Type of trailer FerroSTAR Load kingpin national (t) 12 Axle load national (t) 8 Axle distance (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1400 Loading width (mm) 2325 Technical permissible total weight 39=12+9+9+9 Internal height front (mm) (IHF) 2285 Internal height rear (mm) (IHB) 2285 Volume (m³) 50 Total width (mm) 2550 Wheelbase (mm) (WB) 5800 Total length (mm) 10264 Chassis Chassis material steel Tire dimension 385/65R22.5 Loading length (mm) 8912 Axle manufacturer SAF Brake version Disc brake Brake type SAF - SBS 2220 Offset (ET) 120 Option 1st axle With lift axle and traction aid Activation of traction aid Via button in the truck Air suspension ECAS with lifting and lowering valve Lowering of air suspension Automatic lowering of the air suspension during tipping, can be manually locked via smartboard, as well as switch on the chassis Coupling head Pneumatic European Palm coupling Tire brand Manufacturer selection Rims Steel Tire type Regional distance Wheel nuts Open Wheel nut caps Plastic Landing gear Steel gear landing gear mounted on the front of the chassis, type JOST MODUL, with one-sided operation and 2 speed levels Operation of underrun protection Manual Position of smartboard Left in direction of travel, in front of the axles Tool box Dimensions of tool box - Right in front of the axles 830x500x470 Spare wheel holder Central below the chassis Design Spare wheel holder In winch design Number of mud flaps on the fender 2 pieces Manufacturer lighting Aspöck Work lights 2 pieces LED reversing lights at the rear on the left and right in the direction of travel, mounted on the lamp holder Make tipping cylinder Hyva (STAS manufacturer choice) Type tipping cylinder Hydraulic cylinder with small cover Model tipping cylinder Hyva - FC 169 Type Smartboard ECAS control box Aluminum lean-to ladder With a length of 2.8 m, attached on the right in the direction of travel Broom and shovel holder Loading pressure gauge Ø 63 mm - mounted on the side of the dashboard Mud flap underrun protection Black with STAS logo, mounted across the entire width of the underrun protection Fastening mud flap underrun protection Flexible Plastic chocks With two plastic chocks including bracket Chassis safety device - structure Rubber polyps (not for FSS 74 & 86) Air and electric console On the left in the direction of travel assembled Construction Inclination of front wall (°) 20 Inclination of rear wall (°) 90 Rear wall type hinged doors A-plate Foldable on the rear wall, mounted on the right in the direction of travel Floor Made from 5 mm HB450 Position of rubber pads Rubber pads attached below the floor crossbars Front wall Made from 3 mm HB450 Side wall Made from 4/3 mm HB450 Rear wall Made from 3 mm HB450 Number of hinges on rear wall 3 pairs of door hinges Design of hinged door Division 1/2 to 1/2, with 1 piece scrap lock Opening of the door wings Right door wing opens first (STAS manufacturer selection) Fastening of the opened door wings Fastening of the opened door wings is done via a chain Sealing rear wall With rubber seal in the lower area, tapering to 500 mm on the side Additional locking rear wall Pneumatic double-acting Operation of the additional locking Manually via operation on the side of the Dashboard Type Bow Made of steel in trapezoidal design, foldable Number and position of bows 1 piece Center bow (central) Cjloqaxnmon Hhd Rerb Tarpaulin holder Tarpaulin holder in rotating design, removable Number of tarpaulin holders 3 pieces Fron

Condition: used, overall weight: 42,000 kg, maximum load weight: 34,020 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,480 mm, loading space height: 2,710 mm, loading space volume: 98 m³, first registration: 11/2016, next inspection (TÜV): 02/2026, Year of construction: 2016, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, STAS S300ZX Walking Floor Total Mileage: 163,936 km TÜV (Technical Inspection) until 02/2026. Registration: 11/2016 * SAF axles * Wabco * Tires approx. 70-80% * Goodyear 385/65R22.5 * Platform * Storage compartment * Quick-release coupling for hydraulic connection Cslnsvctuho Hhd Rerb * Unladen weight: 7,980 kg * German vehicle

Condition: used, axle configuration: 3 axles, loading space volume: 35 m³, first registration: 02/2021, Equipment: ABS, STAS 3-axle aluminum tipper S300CX, 35.2m³, vibrating floor, lifting axle, platform, roll tarpaulin, aluminum rims, rental possible Everything at a glance · First registered: February 24, 2021 · Color: Black · Mileage: 166,767 · Tarpaulin color: Red · Own weight: 5,260 kg · Tires: 385/65 R 22.5 · Note: Available immediately Special equipment TYPE S300CX three-axle? Semi-trailer aluminum chassis with aluminum tipping trough, vibrating floor, aluminum rims, 35.2m³, lifting axle, platform with access (work platform with access), pendulum flap with grain pusher, reversing camera, Wabco SmartBoard, loading pressure gauge, drop supports, 4 hook locks, 1x15-pin + 2x7-pin E connection, tool box, foldable underrun protection, 3 LED reversing lights, ladder, broom, A-plate. Standard equipment ABS, EBS, air suspension, disc brake, lifting and lowering device. Errors, typos and prior sale reserved. Celn Hhdsvpnpyj Rerb The seller reserves the right to withdraw before the sale. _____ Internal number for inquiries: TR25009 _____ STARENT Truck & Trailer GmbH Bruck 49, A - 4722 Peuerbach Sales contact: Mr. Ing. Wimmer Christoph (German, English, Czech, Polish, Italian) p: also WhatsApp t: @: Mr. Mehmet Terzi (German, Turkish, English, Russian, Ukrainian, Bosnian, Serbian) p: / also WhatsApp t: -104 @: Mr. Elias Höfler (German, English, Bulgarian, Bosnian, Serbian) p: / also WhatsApp t: -123 @: We speak 13 languages. Yours too, I'm sure. Contact us! Homepage: Facebook: Instagram: Starent Truck & Trailer GmbH buys your commercial vehicles such as tractor units, trailers, trucks and vans. Michael Doblhofer (German, English) p: also WhatsApp t: -102 @: Michael Leirich (German, English) p: WhatsApp t: -125 @:

Condition: used, Year of construction: 2017, CE marking: yes Seriennummer: YE6S300ZXH0000880 Crsln Hhevg I Eijd Rsb

Condition: used, axle configuration: 3 axles, first registration: 09/2018, suspension: air, color: grey, tire size: 385/55, Year of construction: 2018, Reference dimension: 385/55 Axle brand: SAF CD Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Max. Axle load: 9000 kg; Tire tread left: 60%; Tire tread right: 60% Coln Hhjuumnzod Rjrb Rear axle 2: Max. Axle load: 9000 kg; Tire tread left: 70%; Tire tread right: 70% Rear axle 3: Max. Axle load: 9000 kg; Tire tread left: 60%; Tire tread right: 60% Unladen weight: 7,860 kg Please contact Bob Beukers for more information.

Condition: used, overall weight: 42,000 kg, maximum load weight: 34,725 kg, axle configuration: 3 axles, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, first registration: 10/2024, next inspection (TÜV): 10/2025, Year of construction: 2024, total width: 2,550 mm, total height: 3,672 mm, Equipment: ABS, STAS 3-axle HardoX steel tipper 50 cbm First registered 10/2024, condition as NEW Dimensions i.L. (LxWxH) 8,912 x 2,350/ 2,450 x 2,285 mm (conical design in width) Empty weight only 7,275 kg Z-chassis cranked design Floor throughout in 5 mm HardoX steel HB450 Front wall and side walls 4/ 3 mm HardoX steel HB450 Sloping front wall, inside with access 2-wing portal doors, pneumatic post-release 1 piece GRAIN SHIFT in the right-hand door wing Roof roll tarpaulin reinforced design, CENTRAL LOCK HYVA tipping ram type Alpha, suitable for high and low pressure ALUMINUM saddle supports full load 2x air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE with traction aid WABCO trailer EBS with anti-skid protection RSS WABCO Smartboard, automatic tipping lowering Lifting and lowering device Tires 385/65 R 22.5 ALCOA aluminum rims Dura-Bright high gloss Aluminum stepladder Shovel and broom holder Toolbox on the right Cjln Hhsvuhcqed Rjrb 4x LED reversing lights RENTING is the new BUYING, also available immediately from us in FULL-SERVICE RENTAL-----

Condition: new, overall weight: 36,000 kg, maximum load weight: 29,990 kg, axle configuration: 3 axles, loading space volume: 52 m³, Year of construction: 2024, total width: 2,550 mm, Equipment: ABS, Chassis type V-chassis Load kingpin national (t) 12 Axle load national (t) 8 Axle distance (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1400 Loading width (mm) 2475 Series chassis 090 Technical permissible total weight 39=12+9+9+9 Interior height front (mm) (IHF) 2165 Interior height rear (mm) (IHB) 2165 Volume (m³) 51.8 Total width (mm) 2550 Wheelbase (mm) (WB) 6800 Total length (mm) 10656 Chassis Chassis material aluminum Tire dimension 385/65R22.5 Loading length (mm) 9665 Axle manufacturer JOST (STAS manufacturer selection) Offset (ET) 120 Option 1st axle with lifting axle and traction aid Activation of traction aid via button in the truck (installation of button is not part of the equipment) and by pressing the brake pedal three times Option 3rd axle with lifting axle and Optiturn Activation of the additional lifting axle Control via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring Wabco Trailerpulse Air suspension ECAS with raising and lowering valve Automatic lowering of the air suspension during tipping, can be manually locked via smartboard, as well as switch on the chassis Coupling head pneumatic European Palm coupling Tire brand Manufacturer selection Rims Alcoa Dura Bright Tire type Regional distance Wheel nuts Open Wheel nut caps Chrome with STAS logo Landing gears Weweler as steel geared landing gears, type Weweler, with compensating feet, one-sided operation and 2 speed levels Manual operation of underrun protection Black underrun protection mud flap with STAS logo, mounted across the entire width of the underrun protection Fixed underrun protection mud flap attachment Underrun protection cover with covers Handle on underrun protection EBS operation control console Left in direction of travel, in front of the axles Tool box Position of tool box in direction of travel left in front of the axles Material of tool box - left in front of the axles plastic Dimensions of tool box - left in front of the axles 860x520x500 Type of mudguard Domar STAS with white line Number of mud flaps on mudguard 2 pieces Type of mudguard Clear Pass Manufacturer of lighting Aspöck Type of lighting ECOLED II Work lights (operated via switch) 2 pieces LED reversing lights at the rear in direction of travel left and right, on the last crossing of the chassis (controlled via Reverse signal) Position of work lights (operated via switch) 2 LED reversing lights at the front on the left and right in the direction of travel, mounted in the area of the support winches Make of tilt cylinder Hyva (STAS manufacturer selection) Type of tilt cylinder Hydraulic cylinder with large casing Cylinder tilt angle Normal ±47° Creln Hhjupqi Eed Rsb Model of tilt cylinder Hyva - FC 169 Lift of tilt cylinder 7130 Tipping cylinder max. pressure 250 Surface treatment of the cylinder stages Standard surface treatment Hydraulic coupling Rotary coupling Hydraulic coupling - size 1" Hydraulic coupling - gender Female Hydraulic coupling - hose 2,500 mm Type of Smartboard Standard Air connection on the left in the direction of travel, on the lamp holder Aluminum leaning ladder 3 m - on the right in the direction of travel Fastening of leaning ladder for rear entry with hook for hanging Broom and shovel holder with 3 holders each, mounted on the chassis on the left in the direction of travel Two plastic chocks including bracket Safety catch Chassis - construction rubber polyps (not on FSS 74 & 86) Air and electric console mounted on the right in the directi

Condition: used, overall weight: 39,000 kg, empty load weight: 5,880 kg, maximum load weight: 33,120 kg, axle configuration: 3 axles, first registration: 10/2020, next inspection (TÜV): 10/2025, suspension: other, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, ABS/EBS Disc brake Air suspension Lift axle Aluminum tipper body WZK, platform Croln Hhevdyibjd Rjb neutral 2x grain pusher Portal doors Pallet width roller tarpaulin 6x polished aluminum rims German vehicle + papers ... Suspension: air - lift, 1st hand, used car, accident-free, incl. VAT.

Condition: used, axle configuration: 3 axles, first registration: 09/2019, loading space length: 9,700 mm, loading space width: 2,470 mm, loading space height: 2,050 mm, color: other, suspension: air, tire size: 385/65 R22.5, Year of construction: 2019, Equipment: ABS, ADR ADR: ✓ ADR classes: EX II; FL; OX; AT Chassis Chassis height: 100 cm Diameter coupling pin / coupling plate: 2 inch Disc brake: ✓ Structure Dish height: 120 cm Tipper: ✓ Tank Fuel: ✓ Aluminium tipper with tarpaulin, Capacity aprox.49 m3, Box dimensions 970x247x2.05 cm, Electrical tarpaulin, ABS, Air suspension, Jost Axles, Disc brakes, Tyres 385/65R22.5, Shipment dimensions 1080x255x380 cm = More information = Axle configuration Tyre size: 385/65 R22.5 Make axles: Jost Brakes: disc brakes Suspension: air suspension Cjlju H Iuzsn Hhd Rjrb Axle 1: Tyre profile left: 70%; Tyre profile right: 45% Axle 2: Tyre profile left: 20%; Tyre profile right: 15% Axle 3: Tyre profile left: 30%; Tyre profile right: 35% Measures Dimensions (LxBxH): 1080 x 255 x 380 cm Weights Empty weight: 6.200 kg Carrying capacity: 32.800 kg GVW: 39.000 kg Functional Make of bodywork: Stas Identification Registration number: QARX578 Serial number: YE6S300CXK0001842 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, overall weight: 36,000 kg, maximum load weight: 28,320 kg, axle configuration: 3 axles, first registration: 07/2018, total width: 2,550 mm, total height: 3,750 mm, Equipment: ABS, Stas S300 CX steel tipper for scrap * Air suspension and disc brakes * 1st axle can be lifted Csln Hhdjv Ribme Rorb * Vibrator * Wabco SmartBoard * Storage box * Work platform * Roll-up roof tarpaulin * Work lights * Aluminum drop supports We are happy to provide you with further information

Condition: used, overall weight: 39,000 kg, maximum load weight: 32,800 kg, axle configuration: 3 axles, loading space length: 9,700 mm, loading space width: 2,440 mm, loading space height: 2,100 mm, loading space volume: 50 m³, first registration: 06/2008, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Aluminum box body approx. 50 cbm, aluminum chassis, rear combination door double-wing door with espagnolette lock / swing flap, pneumatic rear wall lock, 2 x grain sliders with cover, loading gauge, roller tarpaulin, support winch(es), semitrailer height loaded 1150 mm, ABS, EBS, MERCEDES-BENZ axle(s), disc brake system, air suspension with lifting and lowering device, vehicle can be fitted with advertising and/or lettering Celnou Ta Nze Hhd Rjrb Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: used, axle configuration: 3 axles, loading space length: 10,800 mm, loading space width: 2,420 mm, loading space height: 2,160 mm, first registration: 11/2016, suspension: air, color: other, tire size: 385/65R22,5, Year of construction: 2016, Equipment: ABS, = More options and accessories = - EBS - Alloy wheels = Remarks = Number of axles: 3, Own weight: 6520 kg, Gross weight: 39000 kg, Type of chassis: Complete chassis, Chassis material: Aluminium, Kingpin size: 2 inch, Alloy wheels, Suspension type: Full air, ABS, EBS, Year of construction: 2016, Body material: Aluminium, Number of sides: 1 side, Axle type: SAF, 51M3, ALU, = More information = General information Cabin: Tag Registration number: KLEYN1 Drivetrain Fuel type: Diesel Gearbox Transmission: Manual transmission Axle configuration Tire size: 385/65R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire profile left: 9 mm; Tire profile right: 9 mm Axle 2: Tire profile left: 8 mm; Tire profile right: 7 mm Axle 3: Tire profile left: 10 mm; Tire profile right: 12 mm Dimensions Dimensions (L x W x H): 1175 x 255 x 380 cm Weights Empty weight: 6,520 kg Payload: 32,480 kg GVW: 39,000 kg Environment Emission class: Euro 0 Condition General condition: average Technical condition: average Visual condition: average Damage: none = Company information = Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors and trailers. Our range includes all European brands of model years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, fast-changing • Recognizable quality • A good price • Correct sales team • We speak many languages • We understand our customers • Import and transport support • (Export) license plates are quickly arranged Crsln Hjv Ikmxjhd Rob • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European warranty package.

Condition: new, overall weight: 36,000 kg, maximum load weight: 30,090 kg, axle configuration: 3 axles, loading space volume: 47 m³, Year of construction: 2024, total width: 2,550 mm, Equipment: ABS, agroSTAR 47.6 m³ Chassis type: V-Chassis Cjln Hetb Tqpjhd Rorb National kingpin load (t) 12 National axle load (t) 8 Axle base (mm) 1310-1310 Fifth wheel height (mm) 1175 Chassis width (mm) 1400 Loading width (mm) 2475 Standard chassis: 080 Technical permissible total weight 39=12 9 9 9 Front interior height (mm) (IHF) 2165 Rear interior height (mm) (IHB) 2165 Volume (m³) 47.6 Overall width (mm) 2550 Wheelbase (mm) (WB) 5800 Overall length (mm) 10259.9978 Chassis Chassis material: Aluminum Tire dimensions 385/65R22.5 Loading length (mm) 8880 Axle manufacturer JOST (STAS manufacturer selection) Brake type JOST - DCA-T7 Offset (ET) 120 Optional 1st axle with lifting axle and traction aid Activation of traction aid via button in the truck Optional 3rd axle with lifting axle and Optiturn Activation of the additional lifting axle, controlled via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring Wabco Trailerpulse Air suspension ECAS with raising and lowering valve Automatic lowering of the air suspension during tipping, manually lockable via Smartboard and switch on the chassis Wheels Alcoa Dura Bright Tires type Regional spacing Wheel nut caps Chrome with STAS logo Landing gears Weweler: Steel geared landing gears, type Weweler, with leveling feet, single-sided operation, and 2 Speed levels Manual underride guard operation Towing eye: 1 piece, left in the direction of travel Black underride guard mud flaps with STAS logo, mounted across the entire width of the underride guard Fixed underride guard mud flap attachment Underride guard cover with covers Handle on the underride guard EBS control panel: Left in the direction of travel, in front of the axles Toolbox Position of toolbox: Right in the direction of travel, in front of the axles Material of toolbox - right in front of the axles: Plastic Dimensions of toolbox - right in front of the axles: 860x520x500 Type of fender: Domar STAS with white line Number of mud flaps on the fender: 2 pieces Type of mud flaps: Asphalt Manufacturer: Aspöck Type of lighting: EUROPOINT III - LED Work lights (operated via switch): 2 pieces LED reversing lights at the rear, left and right in the direction of travel, mounted on the lamp holder Work lights (operated via switch): 2 pieces LED reversing lights at the front, left and right in the direction of travel Tipping cylinder manufacturer: Hyva Tipping cylinder type: Hydraulic cylinder with small casing Cylinder tilt angle: Normal ±47° Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 6480 Tipping cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Type: Smartboard: Standard Air connection: Left in the direction of travel, on the lamp holder Aluminum leaning ladder, 3 m - right in the direction of travel Leaning ladder attachment for rear entry with hooks Broom and shovel holders with 3 holders each, mounted on the chassis on the left in the direction of travel Two plastic wheel chocks including brackets Chassis safety device - body: Rubber plugs (not for FSS 74 and 86) Air and electrical console, right in the direction of travel assembled Construction End wall inclination (°) 20 Rear wall inclination (°) 90 Rear wall type combi-door A-plate on trough (not foldable) - right side Incline of the bottom chord profile inside (°) 45 Floor 8 mm ALU - 110 Brinell Rubber pads attached below

Condition: used, overall weight: 36,000 kg, maximum load weight: 28,150 kg, axle configuration: 3 axles, loading space length: 13,300 mm, loading space width: 2,480 mm, loading space height: 2,450 mm, loading space volume: 81 m³, first registration: 04/2005, next inspection (TÜV): 12/2025, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Subject to our "General Terms and Conditions" and without any warranty or guarantee, we are pleased to offer you the following vehicle today, subject to change without notice until completion, errors, typos, and prior sale: Stas 81 cbm Tipper Body (Vehicle 1122) Registration Date: April 19, 2005 additional charge GVW 36,000 kg empty 7,850 kg Payload 28,150 kg TÜV 12/2015, SP 06/2025 Steel chassis, aluminum box body Pallet width Double door 1/2 and 1/2 rear 2 x grain pushers Roll-up tarpaulin, platform Celn Hhdev Nt Nlo Rjrb Load gauge BPW disc ALCOA light alloy rims Tires 385/65R22.5 1.) approx. 70/50%, 2.) approx. 70/50%, 3.) 50/40%, spare wheel approx. 40% 1st axle: lift axle Dust bag 2 x storage boxes (driver and passenger side) Air suspension with lifting and lowering Leaning ladder Roll-up tarpaulin, platform Pallet width All axles in New bushings and bearings, 2024 New crank supports New air springs Price: €19,500.00 (net) All information is provided without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to a value of €5,000.00 is the Ludwigslust District Court; for disputes exceeding this value, the Schwerin Regional Court is the court. Errors, typos, and prior sale excepted.

Condition: used, overall weight: 42,000 kg, maximum load weight: 34,928 kg, axle configuration: 3 axles, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,280 mm, loading space volume: 50 m³, first registration: 01/2024, next inspection (TÜV): 01/2026, Year of construction: 2024, total width: 2,550 mm, total height: 3,672 mm, Equipment: ABS, STAS 3-axle HardoX steel tipper 50 cbm "AGRAR-LINER" First registered January 16, 2024, condition as NEW Dimensions i.L. (LxWxH) 8,912 x 2,350/ 2,450 x 2,280 mm (conical design) Croln Hjrt Rwbohd Reb Empty weight only 7,072 kg Z-chassis cranked design Floor throughout in 4 mm HardoX steel HB450 Front wall and side walls 3 mm HardoX steel HB450 Sloping front wall, inside with access 2-wing combination doors with pendulum function, pneumatic post-release 2 pieces GRAIN SHIFT with 1x dust protection bag Roof roll tarpaulin reinforced design HYVA tipping ram type Alpha, suitable for high and low pressure - ALUMINUM saddle supports full load 2x air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE WABCO Trailer EBS with anti-skid protection RSS WABCO Smartboard Lifting and lowering device Tires 385/65 R 22.5 Aluminum stepladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, also available immediately from us in FULL-SERVICE RENTAL-----

Condition: new, overall weight: 36,000 kg, maximum load weight: 29,560 kg, axle configuration: 3 axles, loading space volume: 56 m³, Year of construction: 2024, total width: 2,550 mm, total height: 3,691 mm, Equipment: ABS, EU conformity Chassis type Z-chassis Load kingpin national (t) 12 Axle load national (t) 8 Axle distance (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1400 Loading width (mm) 2475 Series chassis 100 Technical permissible total weight 39=12+9+9+9 Internal height front (mm) (IHF) 2165 Internal height rear (mm) (IHB) 2165 Volume (m³) 56.1 Total width (mm) 2550 Wheelbase (mm) (WB) 7400 Total length (mm) 11522 Chassis Chassis material steel Tire dimension 385/65R22.5 Loading length (mm) 10464 KC-Value 0650 Axles SAF Axle version Intra Brake version Disc brake Brake type SAF - SBS 2220 (Haldex) Offset (ET) 120 Option 1. Axle with lifting axle and traction aid Activation of traction aid via button in the truck (installation of button is not part of the equipment) and by pressing the brake pedal three times Brake pad wear indicator connected Air bellows protection plate Air suspension ECAS with raising and lowering valve Automatic lowering of the air suspension during tipping, manually lockable via smartboard, as well as switch on the chassis Coupling head pneumatic European Palm coupling Tire brand Manufacturer selection Rims Alcoa Matt Tire type Regional distance Wheel nuts Open Wheel nut caps chrome-plated Landing gear Aluminium drop jacks attached to the front of the chassis, with individual operation on both sides, support force 20t / pair Coln Hhjuya N Dsd Rsrb Manual operation of underrun protection Towing eye 1 piece in the direction of travel on the left Mud flap underrun protection black with STAS logo, mounted across the entire width of the underrun protection Fastening of mud flap underrun protection flexible EBS operation control console In the direction of travel on the left, in front of the axles Tool box Position of tool box in the direction of travel on the left, in front of the axles Material of tool box - left in front of the axles plastic Dimensions of tool box - left in front of the axles 830x500x470 Spare wheel holder in the direction of travel on the right, below the chassis Design of spare wheel holder in winch design Type of mud flap Domar STAS with white line Number of mud flaps on the mudguard 2 pieces Type of mud flap mudguard Clear Pass Manufacturer lighting Aspöck Type of lighting ECOLED II Work lights Position of work lights (operated via switch) 2 pieces LED reversing lights at the rear in Direction of travel left and right, mounted on the lamp holder Make of tilt cylinder Hyva (STAS manufacturer selection) Type of tilt cylinder Hydraulic cylinder with large casing Cylinder tilt angle Normal ±47° Model of tilt cylinder Hyva - FC 169 Lift of tilt cylinder 7630 Tipping cylinder max. pressure 220 Hydraulic coupling Push Pull Hydraulic coupling - size 3/4" Hydraulic coupling - gender Male Hydraulic coupling - hose Without Type of Smartboard Standard Smartboard Aluminum lean-to ladder 2.75 m - mounted on the chassis Position of broom and shovel holder On the side impact protection on the left in the direction of travel Loading pressure gauge Ø 63 mm - mounted on the side of the dashboard Water tank 1 piece Water tank with 30L volume (for washing hands) Position of water tank 30L on the right in the direction of travel, in front of the axles Two plastic chocks including holder with wheel wrench, supplied loose in the Tool box Safety device chassis - construction rubber polyps (not for FSS 74 & 86) Air and electric console mounted on the right in the direction of travel Construction Inclination of front wall (°) 90 Inclinat

Condition: new, overall weight: 36,000 kg, maximum load weight: 30,060 kg, axle configuration: 3 axles, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 9,665 mm, loading space volume: 51 m³, Year of construction: 2024, Equipment: ABS, Kingpin load: National 12 t Axle load: National 8 t Axle spacing: 1310-1310 mm Fifth wheel height: 1150 mm Chassis width: 1400 mm Internal height: Front 2165 mm Internal height: Rear 2165 mm Overall width: 2550 mm Wheelbase: 6800 mm Overall length: 10656 mm Chassis material: Aluminum Tires: 385/65R22.5 Loading length: 9665 mm Axles: SAF Brake type: SAF - SBS 2220 Offset: 120 Option: 1st axle with lift axle and traction aid Activation of traction aid: Via a button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times. Brake pad wear indicator: Not connected Tire pressure monitoring system (Tire Pilot) Without Tire pressure monitoring: Wabco Trailerpulse ECAS air suspension with raising and lowering valve Air suspension lowering: Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis Pneumatic coupling head: European Palm coupling Chrome wheel nut caps with STAS logo Landing gear: Aluminum drop legs mounted at the front of the chassis, with individual controls on both sides, support force 20 t/P Underrun protection control: Manual Towing eye: 1x in the direction of travel Underrun protection mud flaps: Black with STAS logo Underrun protection cover: Handle on the underrun protection EBS control panel: Control panel: In the direction of travel, in front of the axles Toolbox position: On the left in the direction of travel, in front of the axles: Plastic Toolbox dimensions: Left in front of the axles: 860 x 520 x 500 Type of fender: Domar STAS with white line Number of mud flaps on the fender 2x Mudguard type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (switch operated) Position of work lights (switch operated) 2x LED reversing lights, front, left and right, in the area of the landing gear Tilt cylinder manufacturer: Hyva Tilt cylinder type: Hydraulic cylinder with large casing Tilt cylinder model: Hyva - FC 169 Tilt cylinder stroke: 7130 Tilt cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard surface treatment Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminum leaning ladder 3 m Left-hand ladder attachment for rear entry: With hook for hanging Position of broom and shovel holder: With 3 holders each, on the chassis on the left in the direction of travel Loading pressure gauge Ø 100 mm - mounted on the front of the chassis With two Plastic wheel chocks including bracket Chassis safety device - body rubber pads Air and electrical console, centered in the direction of travel, with boom End wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type combi-door Inner lower chord profile inclination (°) 90 Floor 8 mm aluminum - 110 Brinell Position of rubber pads below the floor cross members End wall 4 mm (aluminum) Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall aluminum Cjlnsuar Ams Hhd Rjrb Combi-door type 1/2 - 1/2 with pivoting door end cross member Door leaf opening: Right door leaf opens first (STAS manufacturer's choice) Door end cross member: Pivoting design Hinge type: With double door hinge (double-joint hinge) Slider: Rectangular design, standard Slider position 2 sliders with operating handles, one each on the left and right in the direction of travel. Securing the open door leaves. The

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 91 m³, Year of construction: 2024, Equipment: ABS, Kingpin load (t) 12 Axle load (t) 8 Axle base (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Wheelbase (mm) 7850 Internal height front (mm) 2641 Internal height rear (mm) 2821 Overall width (mm) 2550 Overall length (mm) 14000 Chassis: Steel Tires 385/65R22.5 Chassis neck height (mm) 217 Axle version: Intra Brake type: SAF - SBS 2220 Option: 1st axle with traction aid Optimized traction aid Tire pressure monitoring Air suspension: Raise and lower valve Lowering of the air suspension via smartboard, as well as Lowering valve Pneumatic coupling head: European Palm coupling Steel rims Landing gears: Steel geared landing gears at the front, type JOST MODUL, with one-sided operation and 2 speed settings Fixed underrun protection control Black mud flaps for underrun protection with STAS logo, across the entire width of the underrun protection EBS control panel: Left side, behind the axles Moving floor control panel: Left side, behind the axles Plastic toolbox Lighting type: ECOLED II Reversing lights: 2 LED reversing lights, rear left and right Work lights: 2 LED reversing lights, front left and right, in the area of the landing gear Hydraulic coupling: Female swivel coupling, 3000 mm hose Hydraulic coupling - Position: Connection option on the front wall Smartboard Aluminum lean-to ladder 3.80 m Position Broom and shovel holder on the side impact protection, left in the direction of travel. Loading pressure gauge Ø 100 mm - at the front of the chassis. With two plastic wheel chocks including bracket. Cargo Floor moving floor system. Air and electrical console, centered in the direction of travel, with boom. One-piece protective plate for the lighting unit. Celn Heqaaf Rohd Rjrb Construction Front wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type: wing doors. Cover plate between floor and front wall: solid aluminum plate and PVC strips. Standard fifth wheel plate. Front wall profile: 3 mm - 2 mm. Side wall profile: 3 mm - 2 mm, smooth inside and out, double-walled profiles 600 mm wide - 30 mm thick. Distance between lower corner profile and upper side wall on the rear: 2649. Floor system operation: radio remote control. Cargofloor Control type CF 500 SL-C. E-CONTROL Number of floor profiles: 21 Floor profile type: 10 mm ribbed Aluminum sliding floor end plate With additional plastic guides below the floor profiles Aluminum complete emptying wall Brushes for complete emptying wall Stainless steel handle for complete emptying wall for easy wall movement Storage for complete emptying wall: 6 wheels with bidirectional cleaning (loading floor) Aluminum rear wall Hinged door design: 1/2 to 1/2 split, with door cross member Door leaf opening: Right door leaf opens first Pivoting door cross member Rear door locking: 1x espagnolette per door half Rear wall seal: Standard rubber seal Rear wall additional locking: Pneumatic, single-acting Additional locking: Manual operation of the additional locking system via the side of the dashboard Rear door crash protection: Aluminum bumper Tensioning gear for Roll-up tarpaulin tensioning mechanism with handle, mounted on the underside/side wall of the body. Type: Steel bow, straight, foldable. Number and position of bows: 2 center bows (centered, evenly spaced) and 1 rear bow (rear). Straight tarpaulin holders.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 11,744 mm, loading space width: 2,325 mm, loading space height: 2,460 mm, loading space volume: 68 m³, Year of construction: 2024, Equipment: ABS, Tipping semi-trailer, type FSS, ferroSTAR system Weights Total weight of the trailer: 36,000 kg Semi-trailer load approx.: 11,000 kg Axle load 3 x: 9,000 kg Dimensions Loading length: 13127 mm Loading width: 2325 mm Side height: 2,460 mm Volume approx.: 68 cbm Axles: 3 SAF disc brake axles, CD version, with a load capacity of 9 t each, ET 120 BVA sensors: connected Rims: Aluminum rims, type Alcoa Dura Bright, 11.75 x 22.5, press-in depth 120 mm, 26 mm bore, incl. chrome-plated wheel nut caps Tires: 6 tires, 385/65 R 22.5 steep shoulder Axle lift: Installation of an axle lift on the left and right side, on the 1st axle, Electric gearshift (without tractor equipment), load-dependent with starting aid Suspension: Air suspension on all 3 axles, with 350 mm air bellows, all air reservoirs made of aluminum, with automatic lowering when tipping via button in the chassis - lockable, type chassis - lockable, type ECAS Brake system: SAF disc brake type - SBS 2220 (Haldex) EBS: Installation of a WABCO EBS E-brake system with RSS (Road Stability Support), incl. Wabco Smartboard Lift & lowering valve: 1 lift and lowering valve mounted on the side of the dashboard, type ETASC Loading pressure gauge: 1 loading pressure gauge at the front on the chassis Lighting system: complete lighting system in accordance with STVZO with 2x1 LED five-chamber lights ECOLED II (position lights flashing with direction indicator), separate license plate light in the middle, LED marker lights on the right and left at the end of the chassis, console with 2 x 7-pin socket and 1 x 15-pin socket in the direction of travel right Crjln Hhsuva N Ujd Rob Reversing lights: 2 LED reversing lights, switchable via switches on the dashboard, mounted at the rear on the left and right of the lamp holder in the direction of travel. mounted on the lamp carrier Working lights: 2 LED reversing lights, switchable via switches on the dashboard, mounted at the front on the left and right in the direction of travel in the area of the support winches Collision protection: with aluminum profiles, according to STVZO Underride guard: made of steel, hinged to the rear of the chassis, attached to chain fasteners with rear apron, manual version Mudguards: individual plastic mudguards on all 3 axles, fitted with flexible spray absorber (splash guard) on the 3rd axle Support winches: 1 pair of steel geared support winches attached to the front of the chassis, type JOST, lifting capacity 24 tons/pair Body: welded construction using high-quality HARDOX 450 (alternatively HB 450 sheets, same material quality, from other high-quality suppliers) and fine-grained steel sheets, new model model Floor: made from 5 mm HB450 Side walls: profiled version made of 4/3 mm HB450 End wall: End wall made of 3 mm HB450 Rear wall: made of 3 mm HB450 Steps: 4 steps, on the left in the direction of travel, attached to the inside of the front wall Tipping system: consisting of a multi-stage tipping jack as front cylinder, low-pressure jack 170 bar Hyva, Alpha version, 1" EDBRO coupling/wing nut incl. hydraulic hose (approx. 2,100 mm), incl. hose protection Air shaker: 2 air shakers underneath the body, 1x front center and 1x center, actuation via push button on the left side of the chassis in the direction of travel Walkway: On the chassis with access ladder and safety bar, aluminum ladder on the left in the direction of travel left in direction of travel, STAS aluminum catwalk version Plane frame: consisting of 3 cent

Condition: used, overall weight: 36,000 kg, maximum load weight: 29,400 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, total width: 2,550 mm, Equipment: ABS, Chassis type: Walking floor National kingpin load (t) 12 National axle load (t) 8 Axle base (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Loading width (mm) 2475 Standard chassis: 106 Technical permissible gross weight 39=12+9+9+9 Wheelbase (WB) of walking floor trailer (mm) 6250 Front interior height (mm) (IHF) 2300 Rear interior height (mm) (IHB) 2300 Loading length (mm) 10613 Volume (m³) 60.4 Overall width (mm) 2550 Overall length (mm) 11420 Chassis Chassis material: Aluminum Tire dimensions 385/65R22.5 Chassis neck height (mm) 240 Axle manufacturer: JOST (STAS manufacturer's choice) Brake version: Disc brake Brake type: JOST - DCA-T7 Offset (ET) 120 1st axle: With lifting axle and traction assist Traction assist activation: Via a button in the truck (installation of the button is not included in the equipment) and by pressing the brake pedal three times 3rd axle: With lifting axle and Optiturn Activation of the additional lifting axle: Controlled via Wabco smartboard Brake pad wear indicator connected Cjlnjtzt Axs Hhd Rerb ECAS air suspension with raising and lowering valve Air suspension lowering via smartboard and raising and lowering valve Coupling head: Pneumatic: European Palm coupling Tire manufacturer: Manufacturer's choice Rims: Alcoa Dura Bright Tire type: Regional spacing Chrome wheel nut caps with STAS logo Landing gear Aluminum drop-lift supports mounted at the front of the chassis, with individual controls on both sides, support force 20 t per pair EBS control panel: Left side, behind the axles Moving floor control panel: Left side, behind the axles Toolbox: Material: Right side, behind the axles: PVC Lighting Manufacturer: Aspöck Type: EUROPOINT III - 2 LED reversing lights, mounted on the lamp holder at the rear, left and right side, as seen in the direction of travel 2 LED reversing lights, mounted on the rear, left and right side, as seen in the direction of travel, behind the axles 2 LED reversing lights, mounted at the front, left and right side, as seen in the direction of travel, in the area of the landing gear Hydraulic coupling: Swivel coupling Hydraulic coupling - size 3/4" Hydraulic coupling - gender: Female Hydraulic coupling: Return: Swivel coupling Hydraulic coupling return - size 1" Hydraulic coupling return - gender: Female Hydraulic coupling - hose 3,000 mm Hydraulic connections on the front wall (also with connection option on the support legs) Standard version Hydraulic positioning: pressure return, pressure left, return right (CON) Standard smartboard Air connection in the toolbox Aluminum lean-to ladder, 2.5 m extendable - on the right (in the direction of travel) Broom and shovel holders with 3 holders each, on the chassis, on the left (in the direction of travel) Mud flaps, underrun protection, black with STAS logo, mounted across the entire width of the underrun protection Two plastic wheel chocks including bracket Cargo Floor moving floor system Air and electrical console, mounted centrally with a boom in the direction of travel Lighting unit protection: One-piece mudguard Superstructure Front wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type: wing doors Cover plate between floor and front wall: Solid aluminum plate and PVC strips Standard fifth wheel plate Front wall profile: 3 mm - 2 mm Side wall profile 3 mm - 2 mm smooth inside and out, double-walled profiles 600 mm wide - 30 mm thick Floor system operation: radio remote control Cargofloor Control Type CF 500 SL-C - "

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 91 m³, first registration: 02/2024, next inspection (TÜV): 02/2025, Equipment: ABS, Chassis type moving floor Csln Hhderhtz So Rorb Kingpin load (national) (t) 12 Axle load (national) (t) 8 Axle base (mm) 1310-1310 Fifth wheel height (mm) 1150 Loading width (mm) 2475 Technical permissible Gross vehicle weight 39 = 12 + 9 + 9 + 9 Wheelbase (WB) moving floor trailer (mm) 7850 Internal height front (mm) (IHF) 2641 Internal height rear (mm) (IHB) 2821 Loading length (mm) 13513 Volume (cbm) 91.3 Overall width (mm) 2550 Overall length (mm) 14000 Chassis Tire size 385/65R22.5 Height of chassis neck (mm) 217 Brake version: Disc brake Brake type: SAF SBS 2220 Offset (ET) 120 Option: 1st axle optimized with traction aid Activation of traction aid via button in the truck (installation of button is not included in the scope of delivery) and by pressing the brake pedal three times ECAS air suspension with lifting and Lowering valve Lowering of the air suspension via smartboard, as well as a lifting and lowering valve Pneumatic coupling head European Palm coupling Weweler landing gears as steel geared landing gears, type Weweler, with compensating landing gear, single-sided operation, and 2 speed levels Operator console EBS control panel on the left side of the vehicle, behind the axles Position of the moving floor control panel on the left side of the vehicle, behind the axles Toolbox on the left side of the vehicle, behind the axles Manufacturer Lighting: Aspöck Work lights (operated via switch) 2 LED reversing lights at the front, left and right side of the vehicle, mounted in the area of the landing gear Hydraulic coupling, rotary coupling, size ?? Gender: Female Hydraulic coupling return: swivel coupling size 1 Gender: Female Hydraulic coupling hose 3,000 mm Hydraulic coupling position: connection option on the bulkhead (additionally with connection option on the support legs) Type: Smartboard ECAS control box Aluminum lean-to ladder, 3.80 m, right in the direction of travel Broom and shovel holder on the side impact protection, left in the direction of travel Walking floor system: Cargo Floor Air and electrical console mounted centrally in the direction of travel with a boom Lighting unit protection: one-piece mudguard Construction Front wall inclination () 90 Rear wall inclination () 90 Rear wall type: hinged doors Cover plate between floor and bulkhead: solid aluminum plate and PVC strips Front wall profile: 3 mm, 2 mm, smooth inside and out, double-walled profiles, 600 mm wide, 30 mm thick Floor system operation: radio remote control Cargofloor Control type CF 500 SL-C-E-Control 21 floor profiles, 10 mm ribbed, complete emptying wall Aluminum with brushes Residual emptying wall bearings, 6 wheels with bidirectional cleaning (loading floor) Hinged door design, split to open, with door crossbar Door crossbar in pivoting design, aluminum Rear door locking system: 1x rotary bar per door half Additional rear door locking system: Pneumatic, single-acting Rear door crash protection: Aluminum ramp buffer across the entire width of the rear wall. Tensioning gear for roll-up tarpaulin tensioning. Tensioning gear with handle, mounted on the underside/side wall of the body. Catwalk on the front wall with access and bar lock, STAS aluminum catwalk version Access position: Catwalk: Access ladder mounted on the left and right in the direction of travel. Stepladder in the rear end: Extendable stepladder, mounted on the right in the direction of travel. All information is provided without guarantee. Errors excepted. Subject to prior sale.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, Year of construction: 2024, Equipment: ABS, Chassis type V-chassis Load kingpin national (t) 12 Axle load national (t) 8 Axle distance (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1400 Loading width (mm) 2475 Technical permissible total weight 39=12+9+9+9 Internal height front (mm) (IHF) 2165 Internal height rear (mm) (IHB) 2165 Volume (m³) 56.1 Total width (mm) 2550 Wheelbase (mm) (WB) 7400 Total length (mm) 11455 Chassis Chassis material aluminum Tire dimension 385/65R22.5 Loading length (mm) 10464 Axle manufacturer JOST Brake version disc brake Offset (ET) 120 Option 1st axle with lifting axle and traction aid Option 3rd axle with lifting axle and Optiturn Activation of the additional lifting axle Control via Wabco smartboard Brake pad wear indicator Connected Tire pressure monitoring Wabco Trailerpulse Air suspension ECAS with lifting and lowering valve Lowering of air suspension Automatic lowering of the air suspension during tipping, can be locked manually via smartboard, as well as switch on the chassis Coupling head pneumatic European Palm coupling Rims Alcoa Dura Bright Wheel nut caps chrome with STAS logo Landing gears Weweler As steel geared landing gears, type Weweler, with compensating feet, one-sided operation and 2 speed levels Operation of underrun protection Manual Operating console EBS operation On the left in the direction of travel, in front of the axles Tool box With Position of toolbox In the direction of travel, on the left, in front of the axles Material of toolbox - Left in front of the axles Plastic Dimensions of toolbox - Left in front of the axles 860x520x500 Type of mudguard Domar STAS with white line Number of mud flaps on the mudguard 2 pieces Type of mud flaps on the mudguard Clear Pass Manufacturer of lighting Aspöck Type of lighting ECOLED II Work lights (operated via switch) With Position of work lights (operated via switch) 2 LED reversing lights at the rear in the direction of travel, left and right, on the last crossing of the chassis (controlled via reversing signal) Position of work lights (operated via switch) 2 LED reversing lights at the rear in the direction of travel, left and right, mounted on the lamp holder Position of work lights (operated via switch) Creln Hhdouva Nbe Rsb 2 LED reversing lights at the front in the direction of travel, left and right, mounted in the area of the support winches Manufacture of tipping cylinder Hyva (STAS manufacturer selection) Type of tipping cylinder Hydraulic cylinder with large Cover Cylinder tilt angle Normal ±47° Model tilt cylinder Hyva - FC 169 Lift cylinder stroke 7630 Tipping cylinder max. pressure 220 Surface treatment of cylinder stages Standard surface treatment Hydraulic coupling Rotary coupling Hydraulic coupling - size 1" Hydraulic coupling - gender Female Hydraulic coupling - hose 2,500 mm Type Smartboard Standard Smartboard Air connection Left in direction of travel, on the lamp holder Aluminum leaning ladder 3 m - right in direction of travel Fastening leaning ladder for rear entry With hook for hanging Broom and shovel holder With Position of broom and shovel holder With 3 holders each, mounted on the chassis on the left in direction of travel Plastic chocks With two plastic chocks including holder Safety device Chassis - structure Rubber polyps (not for FSS 74 & 86) Air and electric console Mounted on the right in direction of travel Structure Inclination of front wall (°) 90 Incline of rear wall (°) 90 Rear wall type combi-door A-plate With A-plate on the rear wall (foldable) Incl