Tipper semitrailer

STAS AgroStar V8 / V9 /V10 *Neufahrzeug* ab 45m³

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 56 m³, Equipment: ABS, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-longitudinal beams with welded cross beams. Chassis width 1,600mm Axles and suspension disc brake 430 mm Jost (ex Mercedes DCA) axle units 3 x 9 t with air suspension, air bellows in central arrangement to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raising/lowering valve, BVA brake wear indicator Tires and wheels 6 wheels with tires of size 385/65 R22.5 from manufacturers of choice, with steel rims 11.75 x 22.5 ET 120 Seatposts mechanical version with one-sided operation in 2 speeds with swivel base for air suspension Brake system according to E.G. Standard, Wabco two-line system, spring-loaded parking brake acting on two axles and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco SmartboardInfocenter, aluminum air tank system Pedpefi Nmuefx Ahzoha electrical system according to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Ecopoint 2, 24 volt system with 2x7 and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, 1 LED headlight inside, Tipping body/trough body fully welded inside Aluminum trough, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide welded, floor 8 mm thick highly wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors in 2/3-1/3 version with a grain slide or ww. Version in 1/2-1/2 version possible with one grain slider each, aluminum round profile welded on to the side and bottom of the rear doors to seal the door gap, rear doors partially covered with smooth aluminum, operation of the universal door can be automatically pneumatically locked with a separate lever, aluminum rear bow can be swung out, two hold-down devices with rubber buffers attached to the tipping trough to the frame on the bulkhead Hydraulic system tipping ram with large cover Hydraulic ram mounted on the bulkhead with a max. working pressure of 150 bar, made by Edbro, with approx. 2.5m hydraulic hose and loose half 1", tilt angle approx. 48 degrees Accessories 6 Parlok fenders, complete mud flaps attached to the U-guard across the entire width of the vehicle, aluminum spare wheel holder, side collision protection on the right in a foldable version, tool box type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel bows 150 mm raised in the middle, additional centrally mounted bow holder for positioning a total of 2 bows to increase the loading width, roll-up tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr. /m2 quality with roll-up tarpaulin system, all-round rubber rope at the rear end of the tarpaulin with two tow hooks to be attached to the swivel bow at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin closure at the rear with welded-in rubber rope to prevent water ingress, robust foldable underrun protection with ww. two towing eyes on the left and right including locking bolts, 2 "Clear-Pass" mud flaps on the fender in accordance with EC standards, attached to the side of the frame, an aluminum grain hopper with tarpaulin bag, holder for shovel, broom and scraper mounted above the axles, etc... +590¤ transfer costs available in 50m³ - 56m³ 9,700mm and 10,500mm loading space length * the price varies depending on th

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,920 mm, Equipment: ABS, Delivery time: approx. 3-4 months after receipt of order! Kässbohrer SSL 35m³ horizontal silo NEW VEHICLE Tank # 3 x filling dome DN 450 # 1 x filling nozzle DN 80 Storz B # Vacuum valve # Pressure relief valve 2.0 bar # 2 x outlet cone with cloth loosening # Central DN 100 / 4" outlet line with ring nozzle # 2 x pinch valves with operation at the rear # Operating lever for conveying air & loosening on the side # Air line on the left side # Aluminum ladder and walkway on the left # Tank color: RAL 9010 Chassis & axles # BPW Airlight II axles with disc brakes 22.5" # 1st axle as lift axle # Wabco brake system EBS 4S / 2M with RSS # Wabco ECAS air suspension system # 6 x branded tires 385 / 65 / 22.5" on ALCOA SATIN finish rims ET 0 # Chassis color: RAL 9010 Others & accessories # Aspöck 24V lighting # LED work light rear right # Hose container on both sides 5m long DN 100 / 4" # 1 x rubber hammer Pjdpfxsrr Ryne Ahzjha # 2 x hook wrenches Rental also possible on request! ---- Subject to errors, changes and prior sale! Location: KTH-Trailer GmbH in 47574 Goch / Germany.

Condition: new, maximum load weight: 33,440 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,000 mm, loading space width: 2,550 mm, loading space height: 2,900 mm, total width: 2,550 mm, total height: 3,900 mm, Equipment: ABS, WhatsApp SCHWARZMÜLLER 3-AXLE STANK SEMI-TRAILER NEW VEHICLE AVAILABLE IMMEDIATELY!! Tractor data and equipment 4,500 mm maximum distance from tractor front edge to fifth wheel center 2,240 mm minimum free front distance from fifth wheel center 1,900 mm max. rear turning radius Podpen Hrg Rjfx Ahzoha Total train weight (permissible) 44 t in front and rear traffic or with special permit Total weight (technical) 39 t Axle unit load (technical) 27 t Fifth wheel load (technical) 12 t Dimensions Frame length approx. 13,000 mm Total width max. 2,550 mm Loading height front+rear approx. 1,340 mm Semi-trailer horizontal position at approx. 1,150 mm Loading height approx. 1,510 mm Welded steel frame construction Lightweight frame made of high-strength fine-grain steel Straight frame design, all stakes on the frame mounted Frame height at the front approx. 190 mm (without stakes) Replaceable 2" kingpin Frame for fifth wheel height unloaded approx. 1,150 mm - approx. 1,250 mm, with air-sprung tractor unit Screen-printed plate cover 12 mm between the longitudinal members, screwed, extended at the front to approx. support winches (to protect the tractor unit) and at the rear above the chassis, flush with the upper edge of the longitudinal member Support winches, 2 x 12 t, one-sided operation on the right, thrust compensation, Reinforced cross brace, for loading/unloading when the vehicle is uncoupled 3x SAF-Intradisc-Plus integral axles with disc brakes ø430 mm (22.5" disc), Load capacity 9 t/axle, reinforced axle body, off-road version Axle spacing 1,310 + 1,410 mm Axle lift on 1st axle, raises and lowers automatically depending on weight, with forced lowering and speed-limited starting aid for button operation in the driver's cab and operation via "3 x brakes" 6 x 385/65 R 22.5, 164K steel rims 11.75 x 22.5, ET120 mm, silver Brake system in accordance with EC Directive 71/320 or ECE R13 Two-line compressed air brake system as selected by the factory EBS system 2S2M, one axle sensed RSS - stability program Spring-loaded parking brake on 2 axles Aluminum air tank Brake/air connections with 2 individual coupling heads yellow/red EBS/ABS socket at the front Air suspension with lifting and lowering device Automatic adjustment to programmed driving level from 15 km/h Bellows diameter 360 mm SWIT - Schwarzmüller Intelligent Telematics, "LOCAL TRAC" performance package Axle load display via EBS CAN bus signal for display on display in the driver's cab Extra-strong steel profile front wall approx. 2,500 mm high, with 2 stable center supports, corners beveled at the top approx. 300mm/45° Rail posts attached/replaceable, division: approx. 600 mm, then every 2,400 mm 6 pieces of Exte 144 stanchions, with screwed bracket clamp fastening Rail inclination approx. 0.8° inwards (also suitable for lumber transport) 6 pairs of Exte 144-S stanchions with screw fastening, 2-part telescopic stanchions, load capacity per stanchion pair max. 7t, coated in original signal color orange Telescopic key for operating the Stanchions Stanchion loading height = max. approx. 2,800 mm 8 gripper deflector plates approx. 200 mm long, between the stanchion posts, on the side 6 pairs of lashing hooks on stanchion posts 24-volt lighting system in accordance with EC Directive 76/756/EEC 2 FULL-LED five-chamber tail lights "Aspöck" with integrated ballast 2 LED position lights at the front 2 LED outline lights at the rear Flashing LED side marker lights, controlled by indicator signal 2 license plate lights 2

Condition: new, overall weight: 34,000 kg, axle configuration: 3 axles, loading space length: 8,000 mm, loading space width: 2,200 mm, loading space volume: 30 m³, Equipment: ABS, Delivery time: available at short notice. Approximate weight: 5,885 kg (Wabco Optiturn) Podpfovipp Isx Ahzoha Kässbohrer K.STN L 30 Slurry Tanker # Stainless Steel Semi-Trailer Tanker V2A, 30 m³, with 3 baffle walls # 1 x Fill dome/inspection hatch DN 500 # Aluminium box-type frame # Knorr electronic braking system with RSS # BPW axles with disc brakes # Premium tires: 6 x 385/65 R 22.5 on aluminium rims # Wabco Optiturn # 1st axle is a lift axle # Side underrun protection # Plastic toolbox in front of the first axle on the right # Tank leak test and certification # Access ladder, platform, and safety railing according to UVV # 2 x wheel chocks with holders Technology: # 1 x Vogelsang VX 186–260 Q Light GL pump # 1 fill dome DN 500 # All knife gate valves pneumatically actuated with piston rod # Front level indicator with automatic shut-off # Rear level indicator (6" Plexiglass) # 8" extraction at the top rear with pump sump and rubber funnel # Piping fully stainless steel: 8" / 6" / 4" # 4" overflow pipe, flanged at the top, ending flanged at the lower side of the support structure # 4" flushing line at the rear, starting with a 6" square flange welded to the end plate, ending at the front with a 180° elbow # All control elements in a stainless-steel box, rear left or right # Overpressure and vacuum valves # 6 LED work lights # Including all hydraulic lines and hoses to the tractor unit ---- Subject to errors, changes, and prior sale! Location: KTH-Trailer GmbH in Goch

Condition: used, empty load weight: 6,227 kg, maximum load weight: 29,773 kg, overall weight: 36,000 kg, first registration: 09/2024, loading space length: 10,540 mm, loading space width: 2,440 mm, loading space height: 2,100 mm, loading space volume: 54 m³, suspension: air, color: grey, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, electronic stability program (ESP), Schmitz aluminum tipper 54m³ - Aluminum box body - Extra light empty weight: 6.227kg - Internal dimensions (L x W x H): 10.54 x 2.44 x 2.1 m - Combi door - ABS/EBS - Roll-up tarpaulin - Lift axle x 2 - ALCOA aluminum rims - HYVA hydraulics - LED lighting system - Schmitz axles - Tires: 385/65R22.5 ca.100% Very good condition! German vehicle! Rental possible! Schmitz aluminum tipper 54m³ - Aluminum box body - Extra light empty weight: 6.227kg - Internal dimensions (L x W x H): 10.54 x 2.44 x 2.1 m - Combi door - ABS/EBS - Roll-up tarpaulin - Lift axle x 2 - ALCOA aluminum rims - HYVA hydraulics - LED lighting system - Schmitz axles - Tires: 385/65R22.5 ca.100% Very good condition! German vehicle! Rental possible! Schmitz benne alu 54m³ - Benne en aluminum - Extra light Poids à vide : 6.227kg - Dimensions intérieures (L x l x H) : 10.54 x 2,44 x 2,1 m - Porte combinée Pedpfovih Dqox Ahzjha - ABS/EBS - Bâche à roulettes - Relevant essieu x 2 - Jantes en aluminum ALCOA - HYVA hydraulic system - LED lighting system - Essieux Schmitz - Pneus : 385/65R22.5 environ 100%. Très bon état ! véhicule allemand ! Location possible ! Subject to errors and prior sale. All information without guarantee.

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space volume: 27 m³, Equipment: ABS, Kässbohrer tipping trough SKS - BS 27m³ Availability: approx. 24-28 weeks after receipt of order Psdpfx Ahogimx Iszeha Empty weight: 6,650 kg Trough: # Volume: 27m³ # Tipping angle 48° # Tarpaulin on the right side # Trough made of HB 450 wear-resistant steel HardoX # Floor in 5 mm HB450 # Side walls and rear wall flap 4 mm HB450 # hyva 5-stage hydraulic ram high pressure 250 bar Chassis & axles # BPW axles with drum brakes 22.5 inches # Wabco brake system EBS 4S/2M with RSS # Wabco ECAS air suspension system # Wabco Smartboard # Paver brake # 6 x branded tires 385/65 R 22.5 on steel rims # 1st axle as lift axle # Steel chassis # Foldable underrun protection Others & accessories # Aspöck 24V lighting # LED work light rear left ----Subject to errors, changes and prior sale! Location: KTH-Trailer GmbH in Goch

Condition: excellent (used), functionality: fully functional, machine/vehicle number: VAVJS1339PH522406, empty load weight: 8,520 kg, maximum load weight: 30,480 kg, overall weight: 39,000 kg, first registration: 01/2024, loading space length: 13,500 mm, suspension: air, tire size: 385/55 R22.5, color: yellow, Year of construction: 2024, Equipment: ABS, LOCATION: 73230 Kirchheim unter Teck - 3-AXLE BUILDING MATERIAL FLATBED SEMITRAILER RH230 – Forced Steering Two identical units available – Volvo FM 370 tractor unit (year 2018) available on request Chassis number: VAVJS1339PH522406 + VAVJS1339PH522408 Mileage: 7,700 km - Weights Gross technical weight: 39 t Axle unit load (technical): 27 t Fifth wheel load (technical): 12 t DIMENSIONS Internal length approx. 13,500 mm Internal width approx. 2,480 mm Max. overall width: 2,550 mm Loading height front approx. 230 mm above ASH = approx. 1,360 mm Coupling height unladen approx. 1,130 mm CHASSIS - Welded steel frame construction - Reinforced for 20 t load at center over 4 m loading length - Frame height front approx. 230 mm - 2" interchangeable kingpin - Chassis for unladen coupling height approx. 1,120 mm – ca. 1,200 mm with air-suspended tractor - 4 mm outside frame with hole spacing approx. 100 mm, slotted hole 50/30 mm, for lashing points of 3.5 t each - 10 pairs of 5 t lashing rings, recessed and hinged in floor, also foldable outwards - 8 pairs of square tube inserts with plug-in housing for 80x80 mm stakes, both sides of outer frame - 6 square tube inserts with plug-in housing for 80x80 mm stakes, crosswise over full width, max. pull 2,000 daN AXLES - BPW EcoDisc axles with 430 mm disc brakes (22.5" disc) - Load capacity 9 t/axle, on-road specification - 1st axle rigid - 2nd and 3rd axles with bogie installation for forced steering STEERING - Forced steering "Tridec TR" on two turntable-steered axles for heavy-duty use - Automatic forced steering, front turntable with steering wedge - Steering transmission via two tie rods, rear axles with bogie - Central lubrication points for steering at the front turntable and rear bogie - Axle lift on 1st axle, raises and lowers automatically depending on weight, lift/lower assistance with speed restriction BRAKE SYSTEM / SUSPENSION - EBS system 2S2M, one axle sensor-controlled - RSS/RSP stability program - Spring-actuated parking brake on 2 axles - Aluminum air tanks - Brake/air connections with Quattromatic quick coupling - EBS/ABS socket at the front - Air suspension with lifting/lowering function, total stroke approx. 200 mm - Automatic adjustment to programmed ride height from 15 km/h ASSISTANCE / SAFETY SYSTEMS - Axle load display via EBS CAN bus signal for in-cab display - Wabco SmartBoard for retrieving data via display (mileage, axle unit load, brake diagnostics, etc.) FLOOR Psdpsxq S H Isfx Ahzjha - 27 mm phenolic plywood floor with steel top-hat profile strips above longitudinal beams - Floor load capacity 7,200 kg forklift axle load ACCESSORIES / GENERAL - Aluminum forklift protection strip bolted to both sides of the outer frame - Aluminum forklift protection strip, rear crosswise - Enclosed, special steel toolbox by Schoch, black coated, approx. 3,340 mm long, 2,480 mm wide, 500 mm high, load capacity approx. 1 t, asymmetrical with doors on both sides - Galvanized steel toolbox / monochrome painted lid - 8 removable hardwood transverse support beams, approx. 100/100 mm, steel-edged, fixable in plug-in mounts in the outer frame Very good condition, German registration documents, immediately available.

Condition: new, functionality: fully functional, overall weight: 39,000 kg, tire size: 385/65R22.5, Equipment: ABS, 🇬🇧 MENCI SEMITRAILER WITH “SQUARE” TIPPER BODY - SA850R Volume: 45.4 m³ Dimensions: 9,200 x 2,000 mm Floor thickness: 6 mm Rear floor thickness: 8 mm Kerb weight: 6,650 kg Gross vehicle weight (GVW): 39,000 kg Description, Version & Accessories: - 3rd SAF steered axle with disc brakes or 430 (ET120) 2/2 - 1st axle with automatic lift - CRAMARO electric fully-sealed sliding cover type C (2023) with protective enclosure - Stainless steel toolbox 90x50x50 cm - Toolbox in 90x50x25 cm - Complete ADR kit + A and R plates - Pressure gauge - Electric vibratory motor operated via remote control for tipper body - PROMETEON tyres 385/65 R22.5 - Steel rim 385/65 R22.5 offset 0/120 - Remote control for CRAMARO cover - Additional rear LED work light - Painted hubs - Full LED rear lights - TPMS tyre pressure monitoring system - Hub colour: RED RAL 3020 - Cover tarpaulin colour: BLUE RAL 5002 - Sliding cover with arch height H=300 mm, ADR-rated tarpaulin - 3 climbing steps - Anti-wear corner triangles Steel chassis and alloy body Standard Configuration: - Steel chassis - Air suspension with manual height adjustment valve - Jost landing legs with oscillating curved base - Brake system with EBS 2S/2C and brake force regulator - Electrical system compliant with ADR regulations - Aluminium air tanks, pneumatic quick dump device for suspension - Tipping system with 5-stage front telescopic cylinder - Pneumatic parking brake - Descent safety valve, dual line hydraulic ram with shut-off valve - Front ladder and removable ladder over mudguards - 2 drawbar mounting holes on rear underrun bar Pedpfxevzh T Ae Ahzoha Custom financing or leasing solutions available on site. From 24 up to 96 monthly instalments, also with zero down payment. OUR OTHER LOCATIONS: DOMENICO TRUCK SRL NAPLES OFFICE DOMENICO ESPOSITO S.P.A. EBOLI (SA) - OFFICIAL DEALER: MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 - 377 7064530 OFFICE HOURS: MONDAY-FRIDAY 8:30–19:00 - SATURDAY 08:30–14:00 WE OFFER A LARGE SELECTION OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania - S-Way - S500 - V8 - 650 - 580 - 730 - S500 - S 500 - S500 – Stralis – Man - Nissan V8 - Intarder - 770s - Limited Edition - 660 S Semitrailer - Refrigerated Tipper Semitrailer – Lamberet - Schmitz Isuzu – Flatbed – Crane – Tipper – 4 Axles - Rear 4 Axles - Tway - T-Way - 540 - 460 HP - Xway - X-Way - Three-way tipper - V8 - Scania - Frost Edition Curtainsider - Box - Tail-lift Van - Refrigerated Cell - Isothermal with Fridge - Van Domenico Truck srl accepts no liability for any discrepancies in technical specifications, options, or features which may, in some cases, differ from those listed in the description. We recommend checking the specific vehicle’s features.

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,500 mm, loading space width: 2,410 mm, loading space height: 2,300 mm, loading space volume: 54 m³, Year of construction: 2025, Equipment: ABS, !!FOR SALE, FOR RENT OR RENT WITH PURCHASE OPTION UPON AGREEMENT!! Approx. 52 m³ Grain Tipping Trailer, Aluminum - Manufacturer: Benalu - Model: Grain Tipping Trailer - Year of Manufacture: NEW VEHICLE - Volume: approx. 54 m³ (9.50 m long x 2.41 m wide x 2.30 m high) - Gross Vehicle Weight: 39,000 kg - Unladen Weight: approx. 5,600 kg - Axles: 3 axles / disc brakes - Tires: 385/65 R22.5 on Speedline aluminum rims - Suspension: Air suspension with raise/lower function - EBS Wabco Pedpfx Astf Sahshzjha - Combination door (swing doors and pendulum tailgate) - Pneumatic unlocking of the pendulum tailgate during tipping - 2x grain discharge chutes - 5mm floor - Individual wheel mudguards - Unladen support leg - Folding underrun protection - Load pressure gauge - Operator platform at front - Rolling tarpaulin - Toolbox German vehicle!! German papers!! FOR SALE, FOR RENT OR RENT WITH PURCHASE OPTION UPON AGREEMENT!! Images are for reference only!!

Condition: new, maximum load weight: 28,840 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,660 mm, loading space width: 2,250 mm, loading space height: 2,350 mm, loading space volume: 50 m³, Equipment: ABS, Example: STRONG & LIGHT, now also available for heavy-duty use, from 40 m³ loading volume and 6,600 kg. Podpjhfiqcjfx Ahzoha STRONG & LIGHT, now also available for heavy-duty use, from 40m³ loading volume and 6,600kg ----Example: high-quality aluminum chassis with high-strength steel trough, REAL 7,160 KG, Chassis with 3x9t axles DCA, with 430mm disc brake, 6x steel rims, 1st axle as lift axle with starting aid, aluminum drop-lift supports (can be uncoupled when loaded), foldable underrun protection, digital loading pressure gauge as axle load indication, tool box, lean-to ladder, Trough made of HB450 steel sheets, floor 5mm, side walls and rear doors made of 4mm HB450 steel sheets, wing doors 1/2 - 1/2 with a grain slider on the right, subsequent unlocking of the rear doors, doors sealed with round steel (sealing with rubber seal possible - mud-proof), roll-up tarpaulin with a pipe in the middle, aluminum mudguard to protect the roof tarpaulin during loading, platform standing on the frame, EdBro tipping cylinder with long cover, loading edge = 3,650mm, (some of the vehicles shown contain special equipment) ----Other equipment points and a detailed vehicle offer are available on request, various loading volumes, vehicle lengths and heights possible, Paintwork and equipment according to customer requirements +500¤ transfer costs ?Offers and images are subject to change ?