Used Stas Biostar for sale (9)

Condition: used, maximum load weight: 27,980 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2018, next inspection (TÜV): 08/2027, loading space length: 13,390 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, loading space volume: 91 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2018, Equipment: ABS, 3-axle STAS S 300ZX sliding floor trailer, 91 m³ VIN: 001734 Chassis / Components: * Air suspension / Raise and lower function * Jost support legs * WABCO Smart Board * Tires: 385/65 R.22.5 * Remaining tire tread: Front ~30/90%, Middle 90%, Rear 80% * 3 x SAF axles with disc brakes * Wabco Smart Board * PVC storage box STAS * 2 x Fire extinguisher holders Body: Kdjdpfx Aez A Izijgfot * Sliding floor system Cargo Floor * Volume: approx. 91 m³ * Roll-up tarpaulin * Side protection tarpaulin * Standing platform with walkway on the left and right * Remote control Weights: * Gross vehicle weight: 36,000 kg * Payload: 27,980 kg * Tare weight: 8,020 kg Other: * German registration * 1 previous owner * TÜV (technical inspection) valid until 02 / [Year] New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing and typographical errors, changes, prior sale and errors. Subject to change! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. See for yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transport We will gladly assist you in organizing special transport. Day license plates / export license plates We will gladly assist you in obtaining export license plates / short-term license plates. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and Kodpfx Ageyh S Aisfsdt strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space volume: 90 m³, Year of construction: 2022, Equipment: ABS, Vehicle identification number: YE6S300ZXN0000950 DE MOT inspection valid until: 08.2027, SP (Spain) valid until: 02.2027 FRAME: Aluminum welded construction with extra reinforcement at the axle suspensions. Unladen weight: 7,650 kg Volume: approx. 90.0 m³ Kodjzy S Tajpfx Agfjdt Dimensions: 13,500 x 2,475 x 2,565/2,752 Smooth interior and exterior side walls. Side wall profiles approx. 600 mm wide, 30 mm thick, 3 mm inside, 2 mm outside (grain transport design). FLOOR BOARDS: 21 aluminum floor boards, 7 mm smooth, extremely durable with welded aluminum end caps. Cramaro overquick locking system with electric remote control. MERCEDES-BENZ JOST axles with disc brakes. 2 x LIFT AXLE Platform Wabco Smart Control Air suspension Adjustable support legs Tires: 385/65 R 22.5 Spare wheel holder WITHOUT spare wheel Aluminum wheels Changes, prior sale, and errors are expressly reserved. The description serves for the general identification of the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract is decisive. Our offer generally does not include a new TÜV (technical inspection) approval. If a new TÜV approval is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising or have lettering. Our general terms and conditions of delivery and payment apply.

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR approx. 100 cbm, 14.9 m internal length silver grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal body length: approx. 14,900 mm Internal body width: 2,475 mm Body volume: approx. 90 cbm Gross vehicle weight (GVW): 36 t Axle spacing: 1,310 mm Unladen weight: 8,500 kg King pin height: 1,150 mm TECHNICAL DESCRIPTION 1. CHASSIS KING PIN HEIGHT: Precise king pin height is 1,150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 t Suspension: Original SAF air suspension Brakes: Large disc Wheel offset: ET 120 Brake wear indicators (BVA) included The first axle is a self-lifting axle controlled via the EBS-E system. The third axle is a trailing steering axle. CONNECTIONS BRAKE WEAR INDICATOR (BVA): Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. Including traction aid. Kdjdpjxplxzofx Agfet TRACTION AID: The traction aid is activated by pressing a button in the truck (button in truck not included). AIR SUSPENSION: Lifting and lowering function. Aluminum air tanks. STEERABLE TRAILING AXLE LOCKING: Locking of the steerable trailing axle is managed as follows: - via reverse lights - by button in truck (button in truck not included) TYRES: 6 x 385/65 R 22.5 tyres for regional haulage (manufacturer's choice) on ALCOA MATT aluminum rims, ET 120. BRAKING SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR Dual-line compressed air braking system in accordance with CE guidelines. Spring-loaded parking brake operating on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK: 24 Volt electrical equipment. 2 x 7-pin + 1 x 15-pin ISO sockets. Aspöck kit. Orange LED lighting mounted on the trailer side. Without junction box at rear - NORDIC. REAR LIGHTING IN UNDER-RUN PROTECTION: Lighting is installed in the fixed aluminum underrun protection. With foldable aluminum lighting cover. 2 x 1 five-chamber lamp - EUROPOINT III - LED version. HYDRAULICS POSITION: Connection at the front wall. With additional connection option below the body in front of support legs. ACCESSORIES EXTENDIBLE LADDER AT REAR: Extendible ladder integrated at rear of vehicle, right side. PNEUMATIC CENTRAL LOCKING: With pneumatic central locking. TOOLBOX: PVC toolbox with key (800 x 460 x 430 mm) SPARE WHEEL HOLDER: Single aluminum spare wheel holder. 2. BODY FRONT WALL: The front wall is made of heavy-duty aluminum plank profiles. INTERNAL SEALING BETWEEN FLOOR AND FRONT WALL: Fixed sealing between floor and front wall using aluminum profile and PVC gasket. SIDE WALLS: Inner and outer surfaces smooth. Double-walled side wall profiles, 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain specification). Side wall profiles are fully welded on the inside. WEAR PLATE: Aluminum wear plate, rectangular, inside rear, 2000 (L) x 1500 (H) x 4 mm. MOVING FLOOR SYSTEM: CARGO FLOOR CF 500 SL-C, electric control. 21-board floor system. Drive unit consists of 3 double-acting hydraulic cylinders with 200 mm stroke. Rear end plate in stainless steel. FLOOR SYSTEM OPERATION: Electric control with radio remote (genuine Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation using unique red Cargo rotary knob. MOVING FLOOR FRAME: Frame for wheelbase 7,850 mm. 21 floor boards. FLOOR BOARDS: 21 aluminum floor boards - 8 mm ribbed, with welded aluminum end caps. REAR DOOR: 2 portal h

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2024, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,821 mm, loading space volume: 91 m³, total length: 14,000 mm, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, Chassis Type: Sliding Floor King Pin Load (National) (t): 12 Axle Load (National) (t): 8 Axle Distance (mm): 1310-1310 Saddle Height (mm): 1150 Loading Width (mm): 2475 Technical Permissible Total Weight: 39 = 12 + 9 + 9 + 9 Wheelbase (WB) Sliding Floor Trailer (mm): 7850 Internal Height Front (mm) (IHF): 2641 Internal Height Rear (mm) (IHB): 2821 Loading Length (mm): 13513 Volume (cbm): 91.3 Total Width (mm): 2550 Total Length (mm): 14000 Chassis Tire Size: 385/65R22.5 Chassis Neck Height (mm): 217 Brake Type: Disc Brake Brake Type: SAF SBS 2220 Offset (ET): 120 Option: 1st axle with optimized starting aid Activation of starting aid via button in the truck (button installation not included in the equipment scope) and by pressing the brake pedal three times Air Suspension: ECAS with lifting and lowering valve Lowering of air suspension via Smartboard, as well as lifting and lowering valve Coupling Head: Pneumatic European Palm Coupling Support Winches: Weweler as steel geared support winches, type Weweler, with compensating support winches, single-sided operation and 2 speed levels Operator Console: EBS operation on the left side in the direction of travel, behind the axles Position Operator Console: Sliding floor on the left side in the direction of travel, behind the axles. Toolbox on the left side in the direction of travel, behind the axles. Manufacturer Lighting: Aspöck Work Lights (operated via switch): 2 pieces LED reversing lights front in the direction of travel on the left and right, mounted in the area of the support winches Hydraulic Coupling: Swivel coupling size ?? Gender: Female Hydraulic Coupling: Return Swivel Coupling Size 1 Gender: Female Hydraulic Coupling: Hose 3,000 mm Kdjdpfxszxvvvj Agfot Hydraulic Coupling: Position Connection possibility on the front wall (also with connection possibility on the support legs) Type: Smartboard ECAS control box Aluminum access ladder 3.80 m on the right side in the direction of travel Broom and shovel holder on the side impact protection on the left side in the direction of travel Sliding Floor System: Manufacturer Cargo Floor Air and electrical console in the middle in the direction of travel with mounting brackets Protection of the lighting unit: One-piece mud flap Superstructure Inclination Front Wall (): 90 Inclination Rear Wall (): 90 Rear Wall Type: Swing Doors Cover Plate between Floor and Front Wall: Solid aluminum plate and PVC strips Profile Front Wall: 3 mm 2 mm in smooth design inside and outside, double-walled profiles 600 mm wide, 30 mm thick Operation of floor system: Radio remote control Cargofloor Control Type: CF 500 SL-C-?E?-Control 21 floor profiles 10 mm ribbed, residue-free discharge wall Aluminum with brushes Storage residue-free discharge wall: 6 wheels with bidirectional cleaning (loading floor) Design: swing door division ? to ?, with door closing cross member Door closing cross member in swiveling design, aluminum Locking Rear Doors: 1x turning rod / door half Additional locking rear wall: Pneumatic, single-acting Ramm Protection Rear Doors: Aluminum Ramp buffer over the entire width of the rear wall Tensioner for tarpaulin tensioning: Tensioner with handle, mounted on the underside / side wall of the superstructure Walkway on the front wall with access and bracket protection, mounted, design STAS aluminum walkway Position Access Walkway: Access ladder mounted on the left and right side in the direction of travel Step ladder in the rear end: Extendable step ladder, mounted

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama Plane 900g -10 mm floor -V-shaped sheet metal 2000x1500x4 -Service door on the front panel -12 pairs of lashing eyes on the front panel Chassis: Design with continuous, reinforced chassis, new body manufactured in a self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high, reinforced design Axle and suspension: Disc brake 22.5 Jost axle assembly, 3*9 tons with DCA - air suspension, lift and lower function, Wabco Smartboard, electronic brake wear indicator BVA, 1st axle with start assist (without SZM equipment) Tires and wheels: 6 wheels with tires size 385/65 R 22.5, premium tires, on steel rims, 11.75*22.5 ET 120 Kingpin: Mechanical support winch, 2x20 tons support load Braking system: EBS E system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear Electrical system: According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear panel, 24 Volt system with 1*15-pole and 2*7-pole socket, with side marker lights in LED design 2 separate LED reversing lights integrated in the U-shaped protection, Body/tipper bed: "Body fully welded inside", reinforced side walls Aluminum tipper bed, side walls with 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper chord, plank profiles fully welded inside, aluminum front panel with 600 mm plank profile, 2-3 mm thick, in a straight design, with 2 aluminum wing doors 50/30 mm thick, sliding residual unloading wall with Kevlar sheet approx. 1,500 mm long plus side Kevlar seal Hydraulic system: "Cargo Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles, mounted with approx. 880 PE-HD gliders, type CF 8 mm floor design, fixed parts on the front panel, separate possibility for connecting the hydraulic line under the vehicle with fixed parts, operating pressure 190 - max. 240 bar, aluminum end pieces welded into the sliding floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 1 aluminum spare wheel holder, side aluminum approach guard in foldable design, 1 toolbox approx. 860*460*400 mm in plastic, 3.7m aluminum ladder, tarpaulin approx. 660g/m2 with tarpaulin system incl. tarpaulin rail, with side tension straps or quick release fastener, walkway on the front panel with access ladder, 3 steel locking bars with locking mechanism, swiveling and lockable, aluminum protective cover with hinges for the lighting, etc. +590¤ Delivery costs Kodpfxefi Nmpj Agfsdt Unladen weight: approx. 7,700 kg Offer and images subject to change.

Condition: used, axle configuration: 3 axles, first registration: 08/2026, loading space volume: 90 m³, Year of construction: 2026, Equipment: ABS, Axle spacing (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Loading width (mm) 2475 Internal height front (mm) (IHF) 2641 Internal height rear (mm) (IHB) 2778 Loading length (mm) 13513 Chassis neck height (mm) 217 Overall width (mm) 2550 Overall length (mm) 14000 Axles, brakes, and suspension Axles: SAF Brake type: Disc brake Brake type: SAF - SBS 2220 Offset (ET) 120 Option 1: Axle with lift axle and starting aid Starting aid activation via button in the truck Option 3: Axle with lift axle Brake pad wear indicator ECAS air suspension with raise and lower valve Lowering of air suspension via Smartboard, as well as raise and lower valve Kdedpfx Aszir Ivegfjt Control console, EBS operation on the left side in the direction of travel, behind the axles Standard Smartboard Air and electrical connection console in the center with gantry As a steel gear support winch, type Weweler, with support feet, one-sided operation, and 2 speed levels Position of support handle of the support winch on the outside Tires: 385/65R22.5 Wabco Trailerpulse Tire type: Regional distance TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Lighting: Aspöck Lighting type: ECOLED III 2 LED reversing lights, mounted at the rear in the direction of travel on the left and right on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights at the front in the direction of travel LEDs in the door frame crossmember: 2 x 3 LEDs Splash guard, underrun protection Control console, sliding floor on the left behind the axles Hydraulic coupling, fifth wheel coupling - size 3/4, return line on the right Hydraulic coupling - gender: Female, return line to fifth wheel coupling Hydraulic coupling return line - size 1 - gender: Female Hydraulic coupling - hose 3,000 mm Hydraulic coupling - position: Connection option on the front wall (also with connection option on the support legs) Toolbox, direction of travel, air connection on the side of the instrument panel Aluminum access ladder 3.80 m - on the right in the direction of travel Position of broom and shovel holder on the side underrun protection on the left in the direction of travel Distance from the lower edge profile to the upper side wall at the rear: 2649 Profile, front wall: 3 mm - 2 mm Service door on the left in the direction of travel Side wall Profile, side wall: 3 mm - 2 mm Wear plates, rectangular: 1500 x 1000 x 4 mm Sliding floor system, manufacturer: Cargo Floor Operation of floor system: Wireless remote control Cargofloor Control type: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Floor profile: 8 mm ribbed, sliding floor, stainless steel With additional plastic guides under the floor profiles End cap reinforcement: Stainless steel shoes over the end caps of the floor profiles, with aluminum wear plate above the end caps Oil temperature sensor for sliding floor system Complete discharge wall: ALU Storage of complete discharge wall: 6 wheels Rear door Rear wall type: Swing doors Rear wall: Aluminum Design of swing door: 1/2 to 1/2 split, with door frame crossmember Opening of the door leaves: The right door leaf opens first Door frame crossmember: In a pivoting design Material of door frame crossmember: Aluminum Locking of rear doors: 1x twist bar / door half Number of door handles - door leaf left: 2 door handles per twist bar Number of door handles - door leaf right: 1 door handle per twist bar Fastening of the open door leaves: Spring holder with plasti

Condition: used, first registration: 05/2026, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,641 mm, loading space volume: 91 m³, total length: 14,000 mm, total width: 2,550 mm, Year of construction: 2026, Equipment: * Chassis material: Steel * Chassis type: Moving floor * Kingpin load (national, t): 12 Kdjdpfx Ajy Dmu Negfot * Axle load (national, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor trailer (mm): 7850 * Internal height front (mm) (IHF): 2641 * Internal height rear (mm) (IHB): 2778 * Loading length (mm): 13513 * Chassis neck height (mm): 217 * Total width (mm): 2550 * Volume (m³): 90.6183 * Total length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: Disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option 1st axle: lift axle with traction aid * Activation of traction aid via button in truck (button installation not included) and by pressing the brake pedal three times * Option 3rd axle: with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via Smartboard and lift/lower valve * Pneumatic coupling head: European palm coupling * Operating console: EBS operation on the left in the direction of travel, mounted behind axles * Standard Smartboard * Central air and electrical console with gallows * Landing gears: Weweler * As steel gear-type landing legs, Weweler model, with compensating feet, single-sided operation and 2 speed levels * Landing leg crank handle position: outside * Tyre size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse * Rims: steel * TPMS sensor type: rim-mounted sensor * Wheel nut caps: black - PVC with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 pcs LED reversing lights, rear left and right in direction of travel, mounted on lamp bracket * Working light position (operated by switch): 2 pcs LED reversing lights at the front, left and right in the direction of travel, mounted near the landing gears * Lighting unit protection: one-piece mudguard * LEDs in rear door crossmember: 2 x 3-function LED * Operation underrun guard: Fixed underrun bar * Splash guards for underrun guard: black with STAS logo * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 3/4 * Hydraulic coupling - gender: Female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling - size: 1 * Hydraulic return coupling - gender: Female * Hydraulic coupling hose: 3,000 mm * Hydraulic coupling position: connection option at front wall (additional connection option at landing leg) * Hydraulic positioning: pressure left, return right (CON) * Number of splash guards at mudguard: 2 pcs * Toolbox * Air connection: side-mounted on control panel * Aluminium ladder 3.80 m - right side in direction of travel * Broom and shovel holder * Two plastic wheel chocks * Bulkhead profile: 3 mm - 2 mm * Side wall profile: 3 mm - 2 mm * Moving floor system manufacturer: Cargo Floor * Floor system operation: radio remote control * Cargo Floor control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Bulkhead angle (°): 90 * Rear wall angle (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Clean-out wall: aluminium * Clean-out wall mounting: 6 wheels with bi-directional cleaning (Cargo Floor) * Door type: double-wing doors, divided 1/2 to 1/2, with crossmember at door end

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Kdedpfx Agofi Nmwofet Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-splash mud fla