Used Stas Biostar Semitrailers for sale (72)

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Bedpjyh S Aisfx Adwjww Accessories 6 PV

Condition: used, axle configuration: 3 axles, first registration: 09/2008, suspension: air, tire size: 385/65 R22.5, color: other, General Information Year of manufacture: 2008 Axle Configuration Tire size: 385/65 R22.5 Axle brand: Mercedes-Benz Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminum rims; Lift axle; Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Rear axle 2: Aluminum rims; Tire tread depth left: 4 mm; Tire tread depth right: 8 mm Rear axle 3: Aluminum rims; Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Bedpszgmazofx Adweww Weights Unladen weight: 4,890 kg Payload: 33,110 kg GVW: 38,000 kg Condition Damage: None

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Design with continuous chassis, newly manufactured in self-supporting aluminum construction with corresponding reinforcements in the lower belt for particularly high stability and strength, reinforced cross members 140mm high (for high ground load), additional reinforcement as a gusset plate in the front lower belt/vehicle frame area, chassis made of galvanized steel up to the support structure. Axles and Suspension: Disc brake 22.5, Jost (DCA) axle assembly design, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard information center, electronic brake wear indicator BVA readable in the central control unit (display), 1st axle with starting aid (new EC regulation, without central control unit option), (optional, 1st and 3rd axles can be lifted). Tires and Wheels: 6 wheels with tires of size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75x22.5 ET 120. Kingpin: 2" screwed into a 10mm thick plate. Landing Gear: Mech. support winch with two speeds, 2x 20 tons support load with swivel foot. Bsdpfx Aefi Nmwsdweww Braking System: According to EG standard, EBS electronic system Wabco with RSS system (Roll-Stability-Support) and Premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system. Electrical System: According to the guidelines of EG standard 91/633 and 97/28 with 2 five-chamber lights, type Aspöck Europoint, integrated in the aluminum rear panel, 24-volt system with 1x15-pole and 2x7-pole socket, with side marker lights in LED version, 2 reflective panels on the rear, position lights at the front 2x white, rear 2x red, 2 separate halogen reversing lights integrated in the U-profile. Body/Dump Body: Body fully welded inside, reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400, aluminum dump body, side walls 30mm thick aluminum plank profiles (2-3 mm) 600mm wide, completely welded with upper and lower belts, plank profiles fully welded inside, floor laid as a sliding floor system on 140mm aluminum cross members, floor load capacity approx. 9 tons/m2, cross members mounted closely together (approx. 350mm), design with special aluminum corner profiles in a beveled design, smooth rear wall in a straight design with 2 aluminum wing doors 50/30mm thick with 2 swivel rod locking mechanisms, fastened in the welded aluminum rear frame in Teflon bearings and stainless steel bearings, doors secured in the open position with one chain each on the side, hard wear plates on the side walls approx. 2000x1500x4mm, fully welded, moving residual emptying wall with Kevlar sheeting approx. 1800mm length plus side brushes with Kevlar sheeting seal, service door in the front wall with ladder, folding inwards. Hydraulic System: Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE-HD sliders plus anti-lifting slide bearings, type CF 10mm floor design, hydraulics with approx. 200mm working stroke, fixed points on the front wall, separate possibility for connecting the hydraulic line under the vehicle with fixed points, line size NW 21, fixed points with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric operation behind the left side with remote control integrated in a lockable waterproof box, without hydraulic hoses. Accessories: 6 PVC mudguards with 2 anti-splash mud fla

Condition: used, maximum load weight: 33,290 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2019, loading space length: 8,500 mm, loading space width: 2,470 mm, loading space volume: 55 m³, total length: 10,227 mm, total width: 2,550 mm, total height: 3,878 mm, Year of construction: 2019, Equipment: ABS, STAS 3 - Full Aluminum Axle - Grain Tipper Trailer Bedpfe Ahp Ruox Adwsww ???SHAKER / VIBRATOR!!!??? ? ABS ? EBS ? WABCO SmartBoard ? ALCOA rims ? 3 x air-suspended 9-ton JOST / SAF axles ? Lifting/lowering system ? Lift axle (1st axle) ? GVWR: 39,000 kg ? Tare weight: 5,710 kg ? Payload: 33,290 kg ? Tires: 385 / 65 R 22.5 ? Tire tread: 80 - 90%! ? Platform ? Roller cover ? Work lights ? Pneumatic rear door release ? Automatic / pneumatic venting during tipping ? Overall trailer length: 10,227 mm ? Volume: 55 cubic meters - 1st owner - German trailer - Valid inspection / TÜV: new! Subject to errors and prior sale!

Condition: used, maximum load weight: 27,500 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2023, next inspection (TÜV): 06/2025, loading space volume: 100 m³, Year of construction: 2023, Equipment: ABS, bioSTAR, approx. 100 cbm, 14.9 m internal length silver-grey BIOSTAR - STEERABLE AXLE - V14900 - VERTICAL FRONT WALL - VERTICAL REAR DOOR Internal length of the body: +/- 14900 MM Internal width of the body: 2475 MM Volume of the body: approx. 98.6 cbm GVW: 36 T Wheelbase: 1310 MM Unladen weight: 8500 kg Saddle height: 1150 mm TECHNICAL DESCRIPTION 1. CHASSIS SADDLE HEIGHT The exact saddle height is 1150 mm. AXLES Tridem: Manufacturer: SAF - CUSTOM DESIGN (CD) Capacity: 3 x 9 T Suspension: Original SAF air suspension Brakes: large disc Offset: ET 120 BVA: included The first axle is an automatic lift axle controlled via the EBS-E system. The third axle is a trailing steerable axle. CONNECTION BRAKE WEAR INDICATOR (BVA) Brake wear indicators are connected. LIFT AXLE FUNCTION: Without lift axle. With starting aid. STARTING AID The starting aid is activated by pressing a button in the truck (truck equipment not included). AIR SUSPENSION Lifting and lowering device. Aluminum air tank. LOCKING OF TRAILING STEERABLE AXLE Locking of the trailing steerable axle is done as follows: - via the rear lights - with a button in the truck (truck equipment not included) TIRES 6 x 385/65 R 22.5 tires for regional transport (manufacturer's choice) on aluminum rims ALCOA MATT. ET 120. BRAKE SYSTEM - EBS EBS-E system WABCO 2S/2M - PREMIUM MODULATOR 2-circuit compressed air brake system acc. to CE guidelines. Spring brake parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System) LIGHTING - ASPÖCK 24 Volt electrical system. 2 x 7-pole + 1 x 15-pole sockets ISO connection. Aspöck set. Orange LED lighting is mounted on the side of the trailer. Without distribution box at the rear - NORDIC. REAR LIGHTING IN THE UNDER RIDE GUARD The lighting is mounted in the fixed aluminum under-ride guard. With aluminum lighting protection (foldable). 2 x 1 five-chamber light - EUROPOINT III - LED version. HYDRAULIC CONNECTION Connection on the front wall. With additional connection option below the body in front of the support legs. ACCESSORIES RETRACTABLE LADDER REAR Retractable ladder integrated at the rear of the vehicle, on the right. PNEUMATIC CENTRAL LOCKING With pneumatic central locking. TOOL BOX PVC tool box with key (800 x 460 x 430 mm) Bodjxplxzopfx Adwoww SPARE WHEEL HOLDER Aluminum spare wheel holder (single) 2. TIPPER BODY FRONT WALL The front wall consists of sturdy aluminum plank profiles. SEAL BETWEEN FLOOR AND FRONT WALL Fixed seal between the floor and front wall by means of an aluminum profile and PVC seal. SIDE WALLS Side walls in smooth design, inside and outside. Double-walled side wall profiles 600 mm wide - 30 mm thick - 3 mm inside - 2 mm outside (grain version). The side wall profiles are continuously welded together on the inside. WEAR PLATES Wear plate in aluminum, rectangular, on the inside at the rear, 2000 (L) x 1500 (H) x 4 mm. TIPPER FLOOR SYSTEM CARGO FLOOR CF 500 SL-C Electric operation. 21 slat system. Drive segment consisting of 3 hydraulically double-acting cylinders with a working stroke of 200 mm. End plate at the rear made of stainless steel. OPERATION OF FLOOR SYSTEM Electric operation - electrically with remote control (original Cargo Floor). Loading - stop - unloading via switch. Manual emergency operation by means of a unique red Cargo rotary knob. TIPPER FLOOR FRAME Frame for wheelbase 7850 mm. 21 slats. FLOOR SLATS 21 aluminum slats - 8 mm ribbed with welded aluminum end caps. REAR DOOR 2 doors

Condition: used, maximum load weight: 33,255 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2017, loading space length: 8,500 mm, loading space width: 2,450 mm, loading space height: 1,900 mm, loading space volume: 40 m³, total length: 9,800 mm, total width: 2,550 mm, total height: 3,620 mm, Year of construction: 2017, Equipment: ABS, Stas S300CX 3, 100% Aluminium First registration: 12-09-2017 Jost axles Lift axle Air suspension Disc brakes with ABS and EBS Serial number: YE6S300CXH0001237 Tires: 385/65 R22.5, approximately 35% tread Total weight: 39,000 kg, Unladen weight: 5,745 kg, Payload: 33,255 kg Bedpfxs Ahu Nvj Adwjww Foldable underrun protection Container: L-8.50 m, W-2.45 m, H-1.90 m = 40 m3 New electric Cramaro sliding cover Prepared for ADR approval Errors/typos and prior sale are subject to change.

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 13,500 mm, loading space width: 2,475 mm, loading space volume: 90 m³, Year of construction: 2022, Equipment: ABS, Vehicle identification number: YE6S300ZXN0000950 DE MOT inspection valid until: 08.2027, SP (Spain) valid until: 02.2027 FRAME: Aluminum welded construction with extra reinforcement at the axle suspensions. Unladen weight: 7,650 kg Volume: approx. 90.0 m³ Dimensions: 13,500 x 2,475 x 2,565/2,752 Smooth interior and exterior side walls. Side wall profiles approx. 600 mm wide, 30 mm thick, 3 mm inside, 2 mm outside (grain transport design). FLOOR BOARDS: 21 aluminum floor boards, 7 mm smooth, extremely durable with welded aluminum end caps. Bjdpfozy S Tajx Adwoww Cramaro overquick locking system with electric remote control. MERCEDES-BENZ JOST axles with disc brakes. 2 x LIFT AXLE Platform Wabco Smart Control Air suspension Adjustable support legs Tires: 385/65 R 22.5 Spare wheel holder WITHOUT spare wheel Aluminum wheels Changes, prior sale, and errors are expressly reserved. The description serves for the general identification of the vehicle and does not constitute a guarantee in the legal sense. The description according to the purchase contract is decisive. Our offer generally does not include a new TÜV (technical inspection) approval. If a new TÜV approval is desired, we will be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising or have lettering. Our general terms and conditions of delivery and payment apply.

Condition: used, maximum load weight: 29,630 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2019, next inspection (TÜV): 03/2027, loading space length: 1,055 mm, loading space width: 2,360 mm, loading space height: 2,160 mm, loading space volume: 53 m³, total width: 2,550 mm, total height: 3,829 mm, Year of construction: 2019, Equipment: ABS, 3-axle STAS S 300CX aluminum tipper body, MultiSTAR-V100 VIN: 000737 Bwodjyw Dntepfx Adwow Chassis / Components: * Air suspension / Raise and lower function * Lift axle, 1st axle * Jost support legs * WABCO Smart Board * Alcoa Dura Bright aluminum rims * Tires: 385/65 R.22,5 * Remaining tire tread: Front ~60/50%, Rear ~90/80%, Trailer ~90% * 3 x SAF tridem axles with disc brakes * 1 x PVC storage box * 2 x work lights * Aluminum chassis Body: * Aluminum box tipper body * EDBRO front supports * Volume: approx. 53 m³ * Floor plate 8 mm * Fixed walkway, access on the left side * Combination door, opens to the left + swing * Manual locking * Roll cover * Extendable rear ladder under the tipper body Weights: * Gross vehicle weight: 36,000 kg * Payload: 29,630 kg * Tare weight: 6,370 kg Other: * German registration * 1 previous owner * Valid MOT (technical inspection) New main inspections / safety checks or weight reductions / increases are possible upon request. We will gladly assist you in obtaining export / temporary registration plates; transportation of your purchased vehicles within Germany is also possible. Contact us! We speak the following languages: German, English, and Russian! No liability for printing & typographical errors, changes, prior sale, and errors. Subject to change! Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transport We will gladly assist you in organizing special transport. Temporary registration plates / export registration plates We will gladly assist you in obtaining export registration plates / short-term registration plates. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: used, maximum load weight: 35,260 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2015, next inspection (TÜV): 06/2027, loading space volume: 24 m³, total length: 7,250 mm, total width: 2,200 mm, total height: 1,410 mm, Equipment: ABS, Vehicle number: P19467 WhatsApp: AI-supported, forwarding to the relevant contact person in your language * 3 axles * Full air suspension * ABS * STAS body * Lift axle * Storage compartment * Disc brakes * Aluminum tipper body * Electric roll cover * Rear tipper * SAF axles * Tires - 1st axle 385/65R22.5 * Tires - 2nd axle 385/65R22.5 * Tires - 3rd axle 385/65R22.5 * TÜV (technical inspection) valid until 06-2027 * 24 m³ Sale of a used vehicle in its current condition exclusively to commercial businesses or for export. Sale subject to exclusion of liability for material defects (§ 444 BGB). No guarantee or warranty. Subsequent claims are excluded. Inspection and test drive before purchase are highly recommended. No guarantee for the function of special equipment/extras. Logos/advertising graphics on the photos may have been edited. Bsdpfx Adozuhxhjwjww Errors, input errors, and prior sale are subject to change. We will gladly advise you in German, English, Greek, Russian, Croatian, Italian, Spanish, French, Turkish, Romanian, and Arabic.

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama Plane 900g -10 mm floor -V-shaped sheet metal 2000x1500x4 -Service door on the front panel -12 pairs of lashing eyes on the front panel Chassis: Design with continuous, reinforced chassis, new body manufactured in a self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high, reinforced design Axle and suspension: Disc brake 22.5 Jost axle assembly, 3*9 tons with DCA - air suspension, lift and lower function, Wabco Smartboard, electronic brake wear indicator BVA, 1st axle with start assist (without SZM equipment) Tires and wheels: 6 wheels with tires size 385/65 R 22.5, premium tires, on steel rims, 11.75*22.5 ET 120 Kingpin: Mechanical support winch, 2x20 tons support load Braking system: EBS E system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear Electrical system: According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear panel, 24 Volt system with 1*15-pole and 2*7-pole socket, with side marker lights in LED design 2 separate LED reversing lights integrated in the U-shaped protection, Body/tipper bed: "Body fully welded inside", reinforced side walls Aluminum tipper bed, side walls with 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper chord, plank profiles fully welded inside, aluminum front panel with 600 mm plank profile, 2-3 mm thick, in a straight design, with 2 aluminum wing doors 50/30 mm thick, sliding residual unloading wall with Kevlar sheet approx. 1,500 mm long plus side Kevlar seal Hydraulic system: "Cargo Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles, mounted with approx. 880 PE-HD gliders, type CF 8 mm floor design, fixed parts on the front panel, separate possibility for connecting the hydraulic line under the vehicle with fixed parts, operating pressure 190 - max. 240 bar, aluminum end pieces welded into the sliding floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 1 aluminum spare wheel holder, side aluminum approach guard in foldable design, 1 toolbox approx. 860*460*400 mm in plastic, 3.7m aluminum ladder, tarpaulin approx. 660g/m2 with tarpaulin system incl. tarpaulin rail, with side tension straps or quick release fastener, walkway on the front panel with access ladder, 3 steel locking bars with locking mechanism, swiveling and lockable, aluminum protective cover with hinges for the lighting, etc. +590¤ Delivery costs Unladen weight: approx. 7,700 kg Bsdsfi Nmpjpfx Adwsww Offer and images subject to change.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2024, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,821 mm, loading space volume: 91 m³, total length: 14,000 mm, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, Chassis Type: Sliding Floor King Pin Load (National) (t): 12 Axle Load (National) (t): 8 Axle Distance (mm): 1310-1310 Saddle Height (mm): 1150 Loading Width (mm): 2475 Technical Permissible Total Weight: 39 = 12 + 9 + 9 + 9 Wheelbase (WB) Sliding Floor Trailer (mm): 7850 Internal Height Front (mm) (IHF): 2641 Internal Height Rear (mm) (IHB): 2821 Loading Length (mm): 13513 Volume (cbm): 91.3 Total Width (mm): 2550 Total Length (mm): 14000 Chassis Tire Size: 385/65R22.5 Chassis Neck Height (mm): 217 Brake Type: Disc Brake Brake Type: SAF SBS 2220 Offset (ET): 120 Option: 1st axle with optimized starting aid Activation of starting aid via button in the truck (button installation not included in the equipment scope) and by pressing the brake pedal three times Air Suspension: ECAS with lifting and lowering valve Lowering of air suspension via Smartboard, as well as lifting and lowering valve Coupling Head: Pneumatic European Palm Coupling Support Winches: Weweler as steel geared support winches, type Weweler, with compensating support winches, single-sided operation and 2 speed levels Operator Console: EBS operation on the left side in the direction of travel, behind the axles Position Operator Console: Sliding floor on the left side in the direction of travel, behind the axles. Toolbox on the left side in the direction of travel, behind the axles. Manufacturer Lighting: Aspöck Work Lights (operated via switch): 2 pieces LED reversing lights front in the direction of travel on the left and right, mounted in the area of the support winches Hydraulic Coupling: Swivel coupling size ?? Gender: Female Hydraulic Coupling: Return Swivel Coupling Size 1 Gender: Female Hydraulic Coupling: Hose 3,000 mm Hydraulic Coupling: Position Connection possibility on the front wall (also with connection possibility on the support legs) Type: Smartboard ECAS control box Aluminum access ladder 3.80 m on the right side in the direction of travel Broom and shovel holder on the side impact protection on the left side in the direction of travel Sliding Floor System: Manufacturer Cargo Floor Air and electrical console in the middle in the direction of travel with mounting brackets Protection of the lighting unit: One-piece mud flap Superstructure Inclination Front Wall (): 90 Inclination Rear Wall (): 90 Rear Wall Type: Swing Doors Cover Plate between Floor and Front Wall: Solid aluminum plate and PVC strips Profile Front Wall: 3 mm 2 mm in smooth design inside and outside, double-walled profiles 600 mm wide, 30 mm thick Operation of floor system: Radio remote control Cargofloor Control Type: CF 500 SL-C-?E?-Control 21 floor profiles 10 mm ribbed, residue-free discharge wall Aluminum with brushes Storage residue-free discharge wall: 6 wheels with bidirectional cleaning (loading floor) Design: swing door division ? to ?, with door closing cross member Bwsdpfxezxvvvo Adwsw Door closing cross member in swiveling design, aluminum Locking Rear Doors: 1x turning rod / door half Additional locking rear wall: Pneumatic, single-acting Ramm Protection Rear Doors: Aluminum Ramp buffer over the entire width of the rear wall Tensioner for tarpaulin tensioning: Tensioner with handle, mounted on the underside / side wall of the superstructure Walkway on the front wall with access and bracket protection, mounted, design STAS aluminum walkway Position Access Walkway: Access ladder mounted on the left and right side in the direction of travel Step ladder in the rear end: Extendable step ladder, mounted

Condition: used, functionality: fully functional, machine/vehicle number: YE6S300ZX00080084, empty load weight: 7,810 kg, maximum load weight: 34,190 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 09/2027, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space volume: 90 m³, suspension: air, tire size: 385/65 R 22,5, color: black, Year of construction: 2024, Equipment: ABS, Item number: #31160 Lift axle Portal doors Disc brakes Cargofloor load floor, 8 mm Platform with ladder Moving side wall Pneumatic door locking system Simple twist locks on the outside 12 pairs of recessed lashing rings Roller cover Lift axle A1/A3 Grain discharge chute Holder for ladder/broom Wabco Smart Board 2x LED reversing lights ABS/EBS Weweler kingpin supports Raising/lowering mechanism 2x toolboxes ASW (anti-spray flaps) Side protection cover Axle manufacturer: Jost Bwsdpfx Adez R Sh Eswsw Axles: 3 Tires: 358/65 R 22.5 Body dimensions: 13,513 x 2,475 x 2,700 mm Leasing or financing options available upon request!

Condition: used, axle configuration: 3 axles, color: grey, Equipment: ABS, Year of construction: 2008 Empty weight: 6.800 kg Carrying capacity: 32.200 kg Bwedpfxez A E Srj Adwjw GVW: 39.000 kg

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2017, next inspection (TÜV): 09/2026, loading space length: 13,179 mm, loading space width: 2,500 mm, loading space height: 2,800 mm, Equipment: ABS, * Stas walking floor trailer * Tarp cover * Alloy wheels Bwedpfx Asxu Th Usdwow * SAF axles * Unladen weight: 7,790 kg * Year of manufacture: Internal vehicle number: 11498-----Errors and prior sale reserved.

Condition: used, maximum load weight: 27,910 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2014, Equipment: ABS, German semi-trailer, first owner, good condition. Bwjdpfx Adey Ubg Iswew STAS S 300 ZX walking floor semi-trailer, CargoFloor floor with cable remote control, SAF axles with disc brakes, first axle is a lift axle, portal doors with rotary latch + pneumatic locking, work platform, roll tarp, 1x plastic toolbox, spare wheel holder, rear step ladder, Wabco SmartBoard, air suspension with raising/lowering function, ABS, EBS, electrical connections: 1x 15-pin and 2x 7-pin, etc. Tire size: 385 / 65 R 22.5, tread depth: 14 / 14 / 13 / 11 / 8 / 6 mm Permissible total weight: 36,000 kg / Unladen weight: 8,090 kg / Payload: 27,910 kg !!! I SPEAK POLISH !!! WE SPEAK ENGLISH !!!

Condition: used, maximum load weight: 33,370 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2014, loading space length: 8,500 mm, loading space width: 2,350 mm, loading space height: 1,500 mm, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,160 mm, Equipment: ABS, Stas S300CX Insulated Asphalt Tipper First Registration MB axles with disc brakes, ABS and EBS Air suspension Smartboard Serial number: YE6S300CXD0001049 Tyres: 385/65 R22.5 35% Gross weight: 39,000 kg, unladen weight: 5,630 kg, payload: 33,370 kg Work platform Roller tarpaulin 3 x grain chutes Foldable underrun protection Box: L-8.50 m, W-2.35 m, H-1.50 m = 30 m³ Built for ADR approval Errors, typographical mistakes, and prior sale excepted. Bedpex Txmisfx Adwsww

Condition: used, maximum load weight: 30,140 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2014, next inspection (TÜV): 07/2026, loading space length: 10,500 mm, loading space width: 2,500 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Year of construction: 2014, Equipment: ABS, Well-maintained aluminum box body, Stas S300CX, for grain transport. Bedpfjzmdbpsx Adwjww Features: Lift axle Platform at the front wall Roll-up tarpaulin Grain sack Grain slide Combination rear door with 1/3 and 2/3 opening Foldable rear underrun protection Lateral underrun protection Toolbox For questions regarding the equipment, please call. Errors and prior sale excepted!

Condition: used, maximum load weight: 28,440 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2018, next inspection (TÜV): 06/2027, loading space length: 13,210 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 90 m³, total length: 14,000 mm, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, STAS S 300 ZX sliding floor +/- 90 cbm, "Cargo-Floor" floor with 21 boards, 6 mm thick, stainless steel wear plate at the rear under the sliding floor, remote control, extend/retract function, complete discharge (moving front wall), double-wing door with rotating bar lock at the rear, access and standing platform at the front on the superstructure, roll cover / aluminum folding sheet to protect the cover, side wall protection cover, steel top rail can be swivelled away, ABS, EBS, Wabco Smart Board, SAF INTRADISK CD axle(s), 1st axle - lift axle, disc brake system, aluminum rims, aluminum support legs, air suspension with lifting and lowering device, storage box, vehicle can be covered with advertising and/or labeled. SI87374 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general terms and conditions of delivery and payment apply. Bedps Agdvqofx Adwsww We would be happy to prepare a financing or leasing offer for this item. Please contact us!

Condition: used, maximum load weight: 32,170 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2020, loading space length: 8,550 mm, loading space width: 2,160 mm, loading space height: 1,500 mm, loading space volume: 28 m³, total width: 2,550 mm, total height: 3,060 mm, Equipment: ABS, Stas S300CX First registration: 14-01-2020 Jost/MB axles Lift axle Disc brakes with ABS and EBS Air suspension Smartboard Serial number: YE6S300CXK0002292 Tires: 385/65 R22.5, 35% tread Total weight: 39,000 kg, Tare weight: 6,830 kg, Payload: 32,170 kg Bwsdpfx Aezg Rt Sodwsw Roll-over tarp Foldable under-ride guard Grain discharge chute Work platform Body: L-8.55 m, W-2.16 m, H-1.50 m = 28 m3 Built for ADR approval Errors/typos and prior sale are subject to change.

Condition: used, axle configuration: 3 axles, first registration: 08/2026, loading space volume: 90 m³, Year of construction: 2026, Equipment: ABS, Axle spacing (mm) 1310-1310 Fifth wheel height (mm) 1150 Chassis width (mm) 1200 Loading width (mm) 2475 Internal height front (mm) (IHF) 2641 Internal height rear (mm) (IHB) 2778 Loading length (mm) 13513 Chassis neck height (mm) 217 Overall width (mm) 2550 Overall length (mm) 14000 Axles, brakes, and suspension Axles: SAF Brake type: Disc brake Brake type: SAF - SBS 2220 Offset (ET) 120 Option 1: Axle with lift axle and starting aid Starting aid activation via button in the truck Option 3: Axle with lift axle Brake pad wear indicator ECAS air suspension with raise and lower valve Lowering of air suspension via Smartboard, as well as raise and lower valve Control console, EBS operation on the left side in the direction of travel, behind the axles Standard Smartboard Air and electrical connection console in the center with gantry As a steel gear support winch, type Weweler, with support feet, one-sided operation, and 2 speed levels Position of support handle of the support winch on the outside Tires: 385/65R22.5 Wabco Trailerpulse Tire type: Regional distance TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Lighting: Aspöck Lighting type: ECOLED III 2 LED reversing lights, mounted at the rear in the direction of travel on the left and right on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights at the front in the direction of travel LEDs in the door frame crossmember: 2 x 3 LEDs Splash guard, underrun protection Control console, sliding floor on the left behind the axles Hydraulic coupling, fifth wheel coupling - size 3/4, return line on the right Hydraulic coupling - gender: Female, return line to fifth wheel coupling Hydraulic coupling return line - size 1 - gender: Female Hydraulic coupling - hose 3,000 mm Hydraulic coupling - position: Connection option on the front wall (also with connection option on the support legs) Toolbox, direction of travel, air connection on the side of the instrument panel Aluminum access ladder 3.80 m - on the right in the direction of travel Position of broom and shovel holder on the side underrun protection on the left in the direction of travel Distance from the lower edge profile to the upper side wall at the rear: 2649 Profile, front wall: 3 mm - 2 mm Service door on the left in the direction of travel Side wall Profile, side wall: 3 mm - 2 mm Wear plates, rectangular: 1500 x 1000 x 4 mm Sliding floor system, manufacturer: Cargo Floor Operation of floor system: Wireless remote control Cargofloor Control type: CF 500 SL-C - E-CONTROL Number of floor profiles: 21 Floor profile: 8 mm ribbed, sliding floor, stainless steel With additional plastic guides under the floor profiles End cap reinforcement: Stainless steel shoes over the end caps of the floor profiles, with aluminum wear plate above the end caps Oil temperature sensor for sliding floor system Complete discharge wall: ALU Storage of complete discharge wall: 6 wheels Bodpfszir Ivox Adwsww Rear door Rear wall type: Swing doors Rear wall: Aluminum Design of swing door: 1/2 to 1/2 split, with door frame crossmember Opening of the door leaves: The right door leaf opens first Door frame crossmember: In a pivoting design Material of door frame crossmember: Aluminum Locking of rear doors: 1x twist bar / door half Number of door handles - door leaf left: 2 door handles per twist bar Number of door handles - door leaf right: 1 door handle per twist bar Fastening of the open door leaves: Spring holder with plasti

Condition: used, maximum load weight: 33,110 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2015, loading space volume: 46 m³, Equipment: ABS, Stas three-axle grain tipper, volume approximately 46 m³, portal doors with 2 grain slides, tarpaulin cover, platform, air suspension, lift axle, disc brakes, BPW axles, aluminum rims, Wabco SmartBoard, EBS, ABS. Bedpfx Ao Abyzfsdwoww

Condition: used, maximum load weight: 35,580 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2021, loading space length: 10,485 mm, loading space width: 2,474 mm, loading space height: 1,895 mm, loading space volume: 49 m³, Equipment: ABS, STAS S300CX 49 m³ In operation since 5/2021 Lifting axle ADR: EXII, FL, OX, AT Loading area: 10,485 x 2,474 x 1,895 mm Wheelbase 1,410 mm Axles 9 tonnes SAF axles Combination door Tarpaulin Disc brakes Tyres 385/65 R22.5 Condition: 1st axle 10 mm 2nd axle 11 mm 3rd axle 12 mm Bedpfx Adsw I Ivzewsww Spare wheel Operating weight 6,420 kg Gross weight 42,000 kg NEARLY NEW? ONLY USED FOR AGRICULTURAL PRODUCTS! More at: FB: Dvorak Trucks Czechia IMPORT-EXPORT-SALE-PURCHASE-COMMISSION SALE OF TRUCKS AND CONSTRUCTION MACHINERY TRUCK SERVICE TYRE SERVICE TRUCK WASH TACHOGRAPH INSPECTION

Condition: used, maximum load weight: 32,950 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space length: 10,450 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, loading space volume: 54 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-Axle Stas S 300CX Tipping Semi-Trailer VIN: 080246 Chassis / Components: * Air suspension / Raise and lower function * Lift axle, 1st axle * Weweler supports * WABCO Smart Board * Alcoa aluminum rims * Tires: 385/65 R.22.5 * Remaining tire tread: 1=90% 2=like new 3=90% * 3 x Jost axles with disc brakes * 2x PVC storage box Bedpfx Adjyl N N Dswoww * 2x Work lights * Aluminum chassis Body: * Tipping semi-trailer * Hyva tipping cylinder, max. 220 bar * Volume: approx. 54 m³ * 2x pneumatic locking * Roller cover * Standing platform at the front * Portal doors 50:50 Weights: * Gross weight: 39,000 kg * Payload: 32,950 kg * Tare weight: 6,050 kg Other: * German registration * New MOT / safety inspection available upon request New main inspections / safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transportation of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Temporary registration / Export license plates We will gladly assist you in obtaining export license plates/short-term registration. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: used, maximum load weight: 27,400 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 10/1996, Year of construction: 1996, Equipment: ABS, * STAS 0-34/3A tipper trailer with dump body (40 m3) Bwjdpfjzrklrex Adwjw * Year of manufacture: 1996 * Lift axle * Tipper internal length: 8.70 m * Tipper internal width: 2.40 m * Tipper internal height: 1.85 m * Tare weight: 6600 kg - Gross vehicle weight: 34000 kg * Payload: 27400 kg - Wheelbase: 4500/1325/1325 mm * All information is subject to change without notice * Errors and prior sale excepted

Condition: used, axle configuration: 3 axles, Year of construction: 2008 Empty weight: 4.890 kg Bedpsz A Hlgofx Adweww Carrying capacity: 34.110 kg GVW: 39.000 kg