Used Stas Tipper Semitrailers for sale (113)

Condition: used, axle configuration: 3 axles, first registration: 02/2005, suspension: air, tire size: 385/65, tire condition: 40 %, color: other, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = Rodpfxjy Uly Ej Abnsu - Air Suspension - Disc brakes = More information = Tyre size: 385/65 Make axles: Mercedes Brakes: disc brakes Suspension: air suspension Rear axle 1: Tyre profile: 40% Rear axle 2: Tyre profile: 30% Rear axle 3: Tyre profile: 30%

Condition: good (used), axle configuration: 3 axles, first registration: 04/2007, loading space volume: 58 m³, suspension: air, color: blue, Year of construction: 2007, Make axles: Mercedes-Benz Empty weight: 6.160 kg Carrying capacity: 32.840 kg GVW: 39.000 kg Tipper: Back Redpfjx Tpfcox Abnou Technical condition: good Visual appearance: good Please contact Arie or Pedro for more information = Additional options and accessories = - Air suspension - Disc brakes - EBS - Lift axle - MB axles - Rear doors - Tarpaulin

Condition: used, maximum load weight: 32,447 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 10/2026, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, STAS 3-axle HardoX steel tipper, 86 m³ First registration 01/2023, from first owner Mileage 171,700 km Dimensions (L x W x H): 13,110 x 2,350/2,450 x 2,770 mm (tapered design) Unladen weight: 9,640 kg Floor made of continuous 5 mm HardoX steel HB450 Front and side walls made of 3 mm HardoX steel HB450 Pneumatically foldable rear underrun protection Straight front wall, with internal access ladder Rear portal doors 50:50, pneumatic secondary release HYVA tilting cylinder, Alpha type, low pressure 2x pneumatic vibrators JOST cranked landing gear, full load capacity SAF axles with large disc brakes, 430 mm 1st axle: lifting axle Rjdszahunspfx Abnsu WABCO trailer EBS with anti-roll protection RSS WABCO Smartboard Lifting and lowering device Automatic tipping lowering Tires: 6x 385/55 R 22.5 ALCOA aluminum rims, Dura-Bright, high-gloss Aluminum access ladder Shovel and broom holder Toolbox on the left 4x LED reversing lights RENTING is the new BUYING, and with us, full-service rental is immediately available. -----

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,500 mm, loading space width: 2,480 mm, loading space height: 2,165 mm, loading space volume: 56 m³, Equipment: ABS, Chassis light version In aluminum (15-6-12) Two fully automatically welded I-longitudinal beams with welded cross beams. Chassis width 1,600mm Axles and suspension disc brake 430 mm Jost (ex Mercedes DCA) axle units 3 x 9 t with air suspension, air bellows in central arrangement to the chassis longitudinal beam, 1st axle liftable with starting aid and manual forced lowering, Smart Board Infocenter, raising/lowering valve, BVA brake wear indicator Tires and wheels 6 wheels with tires of size 385/65 R22.5 from manufacturers of choice, with steel rims 11.75 x 22.5 ET 120 Seatposts mechanical version with one-sided operation in 2 speeds with swivel base for air suspension Brake system according to E.G. Standard, Wabco two-line system, spring-loaded parking brake acting on two axles and Wabco EBS-E including RSS (Roll Stability System) and Premium Modulator, Wabco SmartboardInfocenter, aluminum air tank system electrical system according to the guidelines of the STVZO with 2 five-chamber lights type Aspöck Ecopoint 2, 24 volt system with 2x7 and 1x 5-pin socket, with side marker lights, 2 separate LED reversing lights at the rear, 1 LED headlight inside, Tipping body/trough body fully welded inside Aluminum trough, side walls 30 mm thick plank profiles (2-3 mm) 600 mm wide welded, floor 8 mm thick highly wear-resistant alloy (5383H34/HB 110), front wall 4 mm reinforced in straight design, rear wall as universal door in straight design with 2 wing doors in 2/3-1/3 version with a grain slide or ww. Version in 1/2-1/2 version possible with one grain slider each, aluminum round profile welded on to the side and bottom of the rear doors to seal the door gap, rear doors partially covered with smooth aluminum, operation of the universal door can be automatically pneumatically locked with a separate lever, aluminum rear bow can be swung out, two hold-down devices with rubber buffers attached to the tipping trough to the frame on the bulkhead Hydraulic system tipping ram with large cover Hydraulic ram mounted on the bulkhead with a max. working pressure of 150 bar, made by Edbro, with approx. 2.5m hydraulic hose and loose half 1", tilt angle approx. 48 degrees Accessories 6 Parlok fenders, complete mud flaps attached to the U-guard across the entire width of the vehicle, aluminum spare wheel holder, side collision protection on the right in a foldable version, tool box type 860 large, approx. 3 m aluminum ladder, 3 aluminum swivel bows 150 mm raised in the middle, additional centrally mounted bow holder for positioning a total of 2 bows to increase the loading width, roll-up tarpaulin with a central light strip and separate reinforcements in the wear areas in approx. 660 gr. /m2 quality with roll-up tarpaulin system, all-round rubber rope at the rear end of the tarpaulin with two tow hooks to be attached to the swivel bow at the rear, walkway on the frame in chassis color, tarpaulin closure with quick-release fastener, tarpaulin closure at the rear with welded-in rubber rope to prevent water ingress, robust foldable underrun protection with ww. two towing eyes on the left and right including locking bolts, 2 "Clear-Pass" mud flaps on the fender in accordance with EC standards, attached to the side of the frame, an aluminum grain hopper with tarpaulin bag, holder for shovel, broom and scraper mounted above the axles, etc... +590¤ transfer costs Rjdpfsfi Nmusx Abnsu available in 50m³ - 56m³ 9,700mm and 10,500mm loading space length * the price varies depending on th

Condition: used, maximum load weight: 34,900 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2021, next inspection (TÜV): 10/2026, loading space length: 10,000 mm, loading space width: 2,400 mm, loading space height: 2,280 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,861 mm, Year of construction: 2021, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "AGRAR-LINER" Rodpfxoy Nvrzs Abnou First registration 04/2021 Mileage 203,910 km Internal dimensions (LxWxH): 10,000 x 2,350 / 2,450 x 2,280 mm (conical body design) Unladen weight only 7,100 kg Z-chassis, cranked design Floor made completely of 3 mm Hardox steel HB450 Front wall and side walls 3 mm Hardox steel HB450 Inclined front wall, interior access Single-leaf aluminum combination door with swinging function, pneumatic rear unlocking 1 grain discharge slide Reinforced roof roll tarp HYVA tipping cylinder, Alpha type, suitable for both high and low pressure Full-load aluminum landing legs 2x pneumatic vibrators below the body SAF axles with large disc brakes, 430 mm First axle is a lift axle WABCO trailer EBS with roll stability support (RSS) WABCO Smartboard Raise and lower device Tyres: 385/65 R 22.5 Aluminum access ladder Shovel and broom holder Toolbox on right side 4x LED reversing lights RENTING is the new BUYING – immediate availability also on full-service rental with us-----

Condition: used, maximum load weight: 30,060 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 9,665 mm, loading space volume: 51 m³, Year of construction: 2024, Equipment: ABS, Kingpin load: National 12 t Axle load: National 8 t Axle spacing: 1310-1310 mm Fifth wheel height: 1150 mm Chassis width: 1400 mm Internal height: Front 2165 mm Internal height: Rear 2165 mm Overall width: 2550 mm Wheelbase: 6800 mm Overall length: 10656 mm Chassis material: Aluminum Tires: 385/65R22.5 Loading length: 9665 mm Axles: SAF Brake type: SAF - SBS 2220 Offset: 120 Option: 1st axle with lift axle and traction aid Activation of traction aid: Via a button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times. Brake pad wear indicator: Not connected Tire pressure monitoring system (Tire Pilot) Without Tire pressure monitoring: Wabco Trailerpulse ECAS air suspension with raising and lowering valve Air suspension lowering: Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis Pneumatic coupling head: European Palm coupling Chrome wheel nut caps with STAS logo Landing gear: Aluminum drop legs mounted at the front of the chassis, with individual controls on both sides, support force 20 t/P Underrun protection control: Manual Towing eye: 1x in the direction of travel Underrun protection mud flaps: Black with STAS logo Underrun protection cover: Handle on the underrun protection EBS control panel: Control panel: In the direction of travel, in front of the axles Toolbox position: On the left in the direction of travel, in front of the axles: Plastic Toolbox dimensions: Left in front of the axles: 860 x 520 x 500 Type of fender: Domar STAS with white line Number of mud flaps on the fender 2x Mudguard type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (switch operated) Position of work lights (switch operated) 2x LED reversing lights, front, left and right, in the area of the landing gear Tilt cylinder manufacturer: Hyva Tilt cylinder type: Hydraulic cylinder with large casing Tilt cylinder model: Hyva - FC 169 Tilt cylinder stroke: 7130 Tilt cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard surface treatment Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminum leaning ladder 3 m Left-hand ladder attachment for rear entry: With hook for hanging Position of broom and shovel holder: With 3 holders each, on the chassis on the left in the direction of travel Loading pressure gauge Ø 100 mm - mounted on the front of the chassis With two Plastic wheel chocks including bracket Chassis safety device - body rubber pads Air and electrical console, centered in the direction of travel, with boom End wall inclination (°) 90 Redsuar Amspfx Abneu Rear wall inclination (°) 90 Rear wall type combi-door Inner lower chord profile inclination (°) 90 Floor 8 mm aluminum - 110 Brinell Position of rubber pads below the floor cross members End wall 4 mm (aluminum) Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall aluminum Combi-door type 1/2 - 1/2 with pivoting door end cross member Door leaf opening: Right door leaf opens first (STAS manufacturer's choice) Door end cross member: Pivoting design Hinge type: With double door hinge (double-joint hinge) Slider: Rectangular design, standard Slider position 2 sliders with operating handles, one each on the left and right in the direction of travel. Securing the open door leaves. The

Condition: used, maximum load weight: 29,990 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space volume: 52 m³, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, Chassis type: V-Chassis Kingpin load National (t): 12 Axle load National (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2475 Chassis series: 090 Technically permissible total weight: 39=12+9+9+9 Internal height front (mm) (IHF): 2165 Internal height rear (mm) (IHB): 2165 Volume (m³): 51.8 Overall width (mm): 2550 Wheelbase (mm) (WB): 6800 Overall length (mm): 10656 Chassis Chassis material: Aluminium Tire size: 385/65R22.5 Loading length (mm): 9665 Axle manufacturer: JOST (STAS manufacturer choice) Wheel offset (ET): 120 Option: 1st axle with lift axle and traction aid Activation of traction aid via button in the truck (installation of button not included in standard equipment) and by pressing the brake pedal three times Option: 3rd axle with lift axle and Optiturn Activation of additional lift axle control via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lower valve Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard as well as via switch on the chassis Pneumatic coupling head: European palm coupling Tire brand: Manufacturer's choice Rsdpfx Aoupqi Eobnou Wheels: Alcoa Dura Bright Type of tires: Regional distance Wheel nuts: Open Wheel nut caps: Chrome with STAS logo Landing gears: Weweler, steel gearbox landing gears, type Weweler, with compensation feet, single-side operation and 2 speed levels Underrun protection operation: Manual Mudflap underrun protection: Black with STAS logo, mounted across the full width of the underrun protection Mudflap underrun protection attachment: Fixed Underrun protection cover: With covers Handle on underrun protection Control console: EBS control on the left in direction of travel, in front of the axles Toolbox Position toolbox: Left in direction of travel, in front of axles Toolbox material (left, in front of axles): Plastic Toolbox dimensions (left, in front of axles): 860x520x500 Fender type: Domar STAS with white line Number of mudflaps on fender: 2 pcs Fender mudflap type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (activated by switch): 2 pcs LED reversing lights at rear left and right, mounted on the last cross member of the chassis (controlled by reversing signal) Work light position (activated by switch): 2 pcs LED reversing lights left and right at the front in direction of travel, mounted in the area of the landing gears Tipping cylinder manufacturer: Hyva (STAS manufacturer choice) Type of tipping cylinder: Hydraulic cylinder with large casing Tipping cylinder angle: Normal ±47° Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 7130 Tipping cylinder max. pressure: 250 Cylinder stage surface treatment: Standard treatment Hydraulic coupling: Rotary coupling Hydraulic coupling size: 1 Hydraulic coupling gender: Female Hydraulic coupling hose: 2,500 mm Smartboard type: Standard Air connection: Left in direction of travel, on lamp bracket Aluminum access ladder: 3 m - right in direction of travel Mounting of access ladder: for rear entry with hooks for hanging Broom and shovel holder: Three holders each, mounted on the chassis to the left in direction of travel Two plastic wheel chocks incl. holder Chassis-to-body securing device: Rubber cushions (not for FSS 74 and 86) Air and electrical console: Mounted on the right in direction of travel Body A-board on tipper (not f

Condition: used, maximum load weight: 33,707 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 09/2025, next inspection (TÜV): 09/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 50 cbm "EXTREME" Rock Tipper First registration: 09/2025, Condition: NEW Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (tapered width design) Unladen weight: 8,293 kg Z-chassis, cranked design Continuous floor in 6 mm Hardox steel HB450 4 crusher bars evenly distributed along the entire length of the floor, fully welded Front wall and side walls made of 5 mm Hardox steel HB450 Slanted front wall, with internal access Deflector plates along the entire length of the side walls (to protect the mudguards) Rsdpfoxriu Eox Abnsu Hydraulic rear tailgate (with swinging function) HYVA tipping cylinder, type Alpha, suitable for high and low pressure Aluminium landing legs, full-load rated 2x pneumatic vibrators underneath the body SAF axles with large disc brakes, 430 mm 1st axle is a lift axle with start-assist WABCO Trailer EBS with roll stability support (RSS) WABCO Smartboard Automatic tipping lowering device Lifting and lowering device Tyres: 385/65 R 22.5 Aluminium access ladder Shovel and broom holder Toolbox on the right side 4x LED reversing lights RENTING is the new BUYING: also available for immediate full-service rental-----

Condition: used, axle configuration: 3 axles, first registration: 04/1996, loading space length: 10,600 mm, loading space width: 2,480 mm, loading space height: 1,900 mm, loading space volume: 47 m³, Chassis Constructed in aluminum, cranked chassis (volume version: -80 mm). Two fully-automatically welded I-beams with welded cross members. Chassis width: 1,300 mm. Axles and Suspension Drum Brake BPW axle assemblies, 3 x 9 t drum axles with BPW air suspension; air bellows centrally mounted to the chassis longitudinal beams. Lift axle with starting aid and manual forced lowering, raise/lower valve, parking brake. Tyres and Wheels 6 wheels with tyres size 385/65 R 22.5 with approx. 30–40% tread remaining, mounted on steel rims 11.75 x 22.5 ET 0, UNI-wheel bolts for alloy rims. Rodpey Rwl Sefx Abnju Kingpin 2” bolted into a 10 mm thick plate. Landing Legs Support legs by Jost, with 2 x 20 t load capacity. Swivel feet used for air suspension models. Brake System In accordance with E.G. regulations, dual-line Wabco system. Spring-loaded parking brake acting on two axles and EBS-D Wabco system. Aluminium air tank system. Electrical System Compliant with StVZO regulations, featuring two five-chamber tail lamps, 24-volt system with 2 x 7-pin connectors, side marker lamps, and two separate halogen reversing lamps. Tipping Body / Dump Body Fully Welded Interior Aluminum dump body. Side panels: 30 mm thick multi-chamber profiles (2–3 mm), 600 mm wide, welded; floor approx. 8 mm thick, made of high-wear resistant alloy (5383H34/HB 110); front wall 4 mm, reinforced, straight type. Rear wall is a universal door, straight version with 2-leaf division (2/3–1/3), fitted with a grain chute. ALU round profile welded to the side and lower edges for rear door gap sealing. Rear doors partially clad in smooth aluminum. Universal door operated automatically/pneumatically, lockable with a separate lever. Rear strut from aluminum, swiveling. Two hold-down devices with rubber buffers attached to the tipping body, mounted to the front wall frame. Hydraulic System Tipping cylinder renewed in 2023. Hydraulic cylinder mounted on the front wall, approx. 150 bar working pressure, manufacturer Edbro; 150 bar, with approx. 2.5 m hydraulic hose and 1'' loose half coupling. Accessories 6 Parlok mudguards; complete spray protection across the full vehicle width, attached to underrun protection. ALU spare wheel holder. Right-side folding underrun protection. Large tool box, Type 860. Approx. 3 m ALU ladder. 3 ALU swing bars, raised by approx. 150 mm in the middle. Additional center-mounted bow support for positioning up to two bows to increase loading width. Roll tarp with a central light strip and separate reinforcements at high-wear zones, ca. 660g/m² quality, with rolling tarp system. Surrounding rubber cord at the rear tarp closure, fastened with two hooks to the rear swing bar. Walkway on the frame in chassis color with access from both sides. Side tarp closure with tension straps. Rear tarp closure with ALU cover sheet and roll tarp at the back, with welded rubber cord to prevent water ingress. Robust, foldable underrun protection in aluminum with towing eyes on the left. ALU grain hopper with sack attached to the side of the frame. 2 wheel chocks incl. holders. Etc. Offer and images are non-binding.

Condition: used, maximum load weight: 32,590 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2027, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 52 m³, total width: 2,550 mm, total height: 3,690 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle Aluminum Tipper Semi-Trailer 52 cbm First Registration 04/2024 Rjdoy Dy Hfjpfx Abneu Mileage 152,817 km Internal Dimensions (LxWxH): 9,665 x 2,475 x 2,165 mm Pallet width Unladen weight 6,410 kg Floor made of continuous 8 mm aluminum with 110 Brinell Front wall 4 mm aluminum Side wall profiles 3 mm - 2 mm, with smooth finish inside and outside Twin-leaf combination doors with swing function, pneumatic remote unlocking 2 grain discharge chutes with 1x dust protection bag Reinforced roof tarpaulin HYVA tipping cylinder, Type Alpha, suitable for high and low pressure Full-load crank landing gear SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE WABCO trailer EBS with roll stability support (RSS) WABCO Smartboard lifting and lowering device Tyres: 385/65 R 22.5 Aluminum access ladder Shovel and broom holder Toolkit box on right side 4x LED reversing lights RENTING is the new BUYING, instantly available from us also as a FULL-SERVICE RENTAL-----

Condition: used, maximum load weight: 28,155 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2024, total width: 2,550 mm, total height: 3,672 mm, Equipment: ABS, Stas S300CX steel tipper in top condition * SAF axles with air suspension and disc brakes * 1st axle liftable * Tyres 385/65R22.5 * Roof roll tarp * Toolbox * Water tank * Ladder * Work platform with access Rodpfx Asy I E Ehobnsu * Aluminium drop legs * Work lights * Rear doors with grain hatch * Smartboard For further information, we are at your disposal.

Condition: used, empty load weight: 6,580 kg, maximum load weight: 29,420 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2001, loading space volume: 45 m³, tire size: 385/65R22,5, STAS S3-SA336K 3-axle tipper box, aluminium rims, tyre size 385/65 R22.5, lift axle, roof tarpaulin, platform with ladder, portal doors, grain chute, remote control. Sale exclusively to traders with exclusion of any warranty. Subject to errors and prior sale. Rodpfsy N Tpwsx Abnsu

Condition: used, empty load weight: 5,880 kg, maximum load weight: 33,120 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2026, suspension: other, fuel type: gasoline, gearing type: other, driver cabin: other, emission class: none, ABS/EBS Disc brakes Air suspension Lift axle Aluminum tipping body Work platform, staging neutral 2x grain chutes Portal doors Pallet width Roll tarp 6x polished aluminum rims German vehicle + documents Rsdpfx Aboy Nnmqonou damage from accident Location: near 39120 Magdeburg ... Suspension: air - lift, used vehicle, incl. VAT.

Condition: new, maximum load weight: 27,976 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,150 mm, loading space width: 2,330 mm, loading space height: 2,290 mm, loading space volume: 55 m³, Equipment: ABS, Stock no. 5627 Immediately available! Purchase, rental, or rent-to-own options according to agreement! Approx. 55m³ Stas steel tipper trailer for scrap / swing doors / alloy wheels / immediately available ---- * Manufacturer: Stas * Model: Ferrostar - Steel Tipper Trailer * First registration: - (new vehicle) * Gross weight: 36,000 kg * Unladen weight (manufacturer): 8,024 kg * Payload: 27,976 kg * Axles: 3x SAF axles / 1st axle lift axle / starting aid / disc brakes * Suspension: Air suspension with raise & lower function * Tyres: 385/65 R 22.5 on Speedline Diamond alloy rims * Volume: approx. 55m³ (10.15m length x 2.33m width x 2.29m height) * Colour: Chassis RAL 9005, Body RAL 9005, Sliding cover SIO 7999 * EBS * Swing door (split 1/2 to 1/2) with additional pneumatic locking * Full surround rubber seal for swing door * 1x slide in the right-hand door * Tipper entry front left inside * Aluminium platform at the front with left-side access * Central clamping system for tarp securing * 2 roof bows (1 mid, 1 rear) * Aluminium sheet for tarp protection * Coupling height: 1.20m Rodexpb Ufspfx Abnju * Floor: 5mm HB450 * Side walls: 4/3mm HB450 * Front wall: 3mm HB450 * Rear wall: 3mm HB450 * Automatic lowering during tipping * Load gauge * Wabco Smartboard * Approx. 2.80m aluminium ladder on the right * Single mudguards * Aluminium full-load landing legs as drop legs * Shovel and broom holder on the right * 1x toolbox on the left * 1x LED work light on the left * 1x LED work light on the right * LED reversing lights * LED taillights * Folding underrun protection * Tyre pressure monitoring (Wabco Trailerpulse) * "A" sign plate Immediately available! Purchase, rental, or rent-to-own options according to agreement! Notice regarding possible errors in the advertisement: Despite careful preparation of this listing, errors may occasionally occur in the description or details. We accept no liability for mistakes, changes, or prior sale. All information is subject to change without notice. Please contact us to verify details or clarify further questions.

Condition: used, maximum load weight: 34,725 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle HardoX Steel Tipper 50 cbm "X-Shape" First registration 10/2024 Mileage 47,509 km Internal dimensions (LxWxH): 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Unladen weight only 7,275 kg Z-chassis, cranked version Continuous 5 mm HardoX steel HB450 floor Front wall and side walls 4/3 mm HardoX steel HB450 Angled front wall, internal access 2-wing portal doors with pneumatic post-release 1 grain hatch in the right door leaf Reinforced rollover tarp, central locking HYVA tipping cylinder type Alpha, suitable for high and low pressure Full-load ALU landing legs 2x air vibrators below body SAF axles with large disc brakes, 430 mm 1st axle: lift axle with starting aid Rodpjyy Hakefx Abneu WABCO trailer EBS with rollover stability support (RSS) WABCO Smartboard Automatic tipping lowering Lifting and lowering mechanism Tires: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminum folding ladder Holder for shovel and broom Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – also available for immediate delivery as FULL-SERVICE RENTAL.

Condition: used, maximum load weight: 34,725 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper, 50 cbm, "X-Shape" First registered October 2024, like new condition Dimensions (L x W) (LxWxH) 8,912 x 2,350/2,450 x 2,285 mm (conical design in width) Curb weight only 7,275 kg Z-chassis, offset design Floor made of 5 mm Hardox HB450 steel Front wall and side walls made of 4 mm Hardox HB450 steel Sloping front wall, with access inside Double-leaf portal doors, pneumatic re-locking 1 grain pusher in the right door leaf Reinforced roll-top tarpaulin, central locking HYVA tipping ram type Alpha, suitable for high and low pressure Aluminum fifth wheels, full load 2 pneumatic vibrators below the body SAF axles with large disc brakes, 430 mm Rjdpfxeyxb E Es Abnou 1st axle: lift axle with traction assist WABCO Trailer EBS with anti-skid system RSS WABCO Smartboard, Automatic tipping lowering Lifting and lowering device Tires: 385/65 R 22.5 ALCOA Dura-Bright high-gloss alloy wheels Aluminum leaning ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, also available from us as a FULL-SERVICE RENTAL.

Condition: used, maximum load weight: 34,928 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2027, loading space length: 8,912 mm, loading space width: 2,400 mm, loading space height: 2,280 mm, loading space volume: 50 m³, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper 50 cbm "AGRAR-LINER" First registered January 16, 2024, condition as NEW Dimensions i.L. (LxWxH) 8,912 x 2,350/ 2,450 x 2,280 mm (conical design) Empty weight only 7,072 kg Z-chassis cranked design Redpfx Ajyv T Sxjbneu Floor throughout in 4 mm HardoX steel HB450 Front wall and side walls 3 mm HardoX steel HB450 Sloping front wall, inside with access 2-wing combination doors with pendulum function, pneumatic post-release 2 pieces GRAIN SHIFT with 1x dust protection bag Roof roll tarpaulin reinforced design HYVA tipping ram type Alpha, suitable for high and low pressure - ALUMINUM saddle supports full load 2x air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE WABCO Trailer EBS with anti-skid protection RSS WABCO Smartboard Lifting and lowering device Tires 385/65 R 22.5 Aluminum stepladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING, also available immediately from us in FULL-SERVICE RENTAL-----

Condition: new, axle configuration: 3 axles, loading space length: 12,355 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 608 m³, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: Rjdpoy Dmv Hjfx Abnou * Chassis material: Aluminium * Chassis type: V-chassis * Kingpin load (national) (t): 12 * Axle load (national) (t): 8 * Axle spacing (mm): 1310-1310 * Fifth wheel height (mm): 1150 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 110 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 11364 * KC-Value: 0800 * Overall width (mm): 2550 * Volume (m³): 60.8926 * Wheelbase (mm) (WB): 7470 * Overall length (mm): 12355 * Brake version: disc brake * Offset (ET): 120 * Option 1st axle: with lift axle and starting aid * Activation of starting aid via button in truck (mounting of button not included in standard equipment) and by pressing the brake pedal three times * Option 3rd axle: with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * ECAS air suspension with raise and lower valve * Automatic lowering of air suspension during tipping process, can be manually locked via Smartboard as well as switch mounted to chassis * Pneumatic coupling head: European palm coupling * Control console: EBS control on left-hand side in direction of travel, in front of axles * Standard Smartboard * Landing gears: Weweler * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional application * TPMS sensor type: Rim-mounted sensor * Wheel nut caps: Chrome with STAS logo * Lighting type: ECOLED III - with STAS logo * Working light position (operated by switch): 2x LED reverse lights at rear, left and right (on lamp bracket) * Working light position (operated by switch): 2x LED reverse lights at the front, left and right, near landing gears * LEDs in door end crossmember: 2 x 3-function LED * Operation underrun protection: manual * Mudflaps underrun protection: Black with STAS logo * Cylinder tipping angle normal: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 8130 * Max. tipping cylinder pressure: 250 * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: Rotary coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Mudflap type: Clear Pass mudguard * Toolbox: 860x520x500 * Air connection: left side in direction of travel, on lamp bracket * Aluminium access ladder: 3 m * Two plastic chocks * Chassis-body catch device: Rubber polyps Body: * Front wall angle (°): 90 * Rear wall angle (°): 90 * Lower chord profile inside angle (°): 90 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads fitted below floor cross-members * Rear wall type: combination door * Rear wall: aluminium * Combination door type: 1/2 - 1/2 with pivoting door end crossmember * Door end crossmember: pivoting design * Slide position: 2 units, left + right * Additional rear wall locking: pneumatic double-acting * Operation of additional lock: automatic during unloading, additionally manual via control on side of instrument panel * Number and position of roof bows: 3 mid bows (evenly spaced) and 1 rear bow (at back) * Position and type of roof bow hinge: right

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: Aluminum * Chassis type: V-chassis * Fifth wheel load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * Axles: SAF * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Option: 3rd axle with lift axle and Optiturn Redpfx Asy Dmvmsbnju * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, can be manually locked via Smartboard and switch on the chassis * Pneumatic coupling head: European palm-type coupling * Operation console: EBS controls on the left in direction of travel, ahead of the axles * Standard Smartboard * Air and electrical console on the right in direction of travel * Landing gears: Weweler steel gearbox-type landing gears with compensating feet, single-sided operation and 2-speed * Tire dimension: 385/65R22.5 * Tire pressure monitoring: Wabco TrailerPulse * Rims: Alcoa Dura-Bright * Tire type: Regional distance * TPMS sensor type: Rim-mounted sensor * TPMS sensor * Chrome lug nut covers with STAS logo * Work light position (operated by switch): 2 LED reversing lights at rear, left and right in direction of travel, mounted on lamp bracket * Work light position (operated by switch): 2 LED reversing lights at front, left and right in direction of travel, mounted at landing gear area * LEDs in door end cross member: 2 x 3-function LED * Underrun protection operated manually * Tow eyes: 2 each left and right * Splash guards on underrun protection: Black with STAS logo * Cylinder tipping angle normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 bar * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: Swivel coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of splash flaps on mudguard: 2 pcs * Mudguard splash flap type: Asphalt * Toolbox: 860x520x500 mm * Aluminum access ladder, 3 m - right side in direction of travel * Broom and shovel holder * Ferry lashing rings * 2 lashing eyes at rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber polyp Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Inner lower belt profile angle (°): 45 * Front wall: 4 mm (aluminum) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads installed below floor cross members * Rear wall: Kombi-door type * Kombi-door type: 2/3 - 1/3 with swiveling end cross member * Door wing opening: right wing opens first * End cross member of door: swiveling design * Hinge type: with double door joint * Slide: Rectangular design * Slide position: 1 piece in center * Grain discharge / dust bag: 1 piece grain chute incl. dust bag * Rear wall: smooth surface * Door wings secured open with chain

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 476 m³, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: aluminium * Chassis type: V-chassis * King pin load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * SAF axles * Offset (ET): 120 * Option: 1st axle with lift axle and traction assist * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR) 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, manually lockable via Smartboard and chassis switch * Pneumatic coupling head: European palm coupling * Control console: EBS operation on driver's side before the axles * Standard Smartboard * Air and electrical console, passenger side * Landing gears: Weweler steel gear landing gears, type Weweler, with compensating feet, one-sided operation, and 2-speed function * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional application * TPMS sensor type: rim-mounted sensor * TPMS sensor included * Chrome wheel nut covers with STAS logo * Working lamp position (operated by switch): 2 LED reversing lights at the rear, left and right, mounted on the lamp bar * Working lamp position (operated by switch): 2 LED reversing lights at the front, left and right, mounted near the landing legs * LEDs in door end cross member: 2 x 3-function LED * Underrun protection: manual operation * Tow hooks: 2 pcs left and right * Mud flaps underrun protection: black with STAS logo * Cylinder tipping angle, normal: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Max. tipping cylinder pressure: 250 * Cylinder stage surface treatment: standard finish * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 1 * Hydraulic coupling gender: female * Hydraulic coupling hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of mud flaps on mudguard: 2 pcs * Mudguard mud flap type: asphalt * Toolbox: 860x520x500 * Aluminium ladder 3 m - passenger side Redpfjy Dmvaox Abnou * Broom and shovel holder * Ferry lashing rings * 2 lashing rings at the rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber buffer Body: * Front wall tilt (°): 20 * Rear wall tilt (°): 90 * Inner lower belt profile tilt (°): 45 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm aluminium - 110 Brinell * Rubber pads installed under floor crossmembers * Rear wall type: combination door * Combination door type: 2/3 - 1/3 with swiveling door cross member * Door leaf opening: right leaf opens first * Swiveling door end cross member * Hinge type: double door hinge * Slide gate: rectangular design * Slide gate position: 1 piece, centred * Grain outlet / dust bag: 1 grain funnel incl. dust bag * Smooth rear wall surface * Fastening of opened door leaves secured by chain * Rear wall gasket with standard rubber seal * Extra aluminium round profile

Condition: used, maximum load weight: 34,127 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,822 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "X-Shape" First registration: 10/2024, Condition: Like NEW Mileage: only 16,120 km Internal dimensions (LxWxH): 10,149 x 2,350 / 2,450 x 2,285 mm (tapered design in width) Unladen weight: only 7,827 kg Redpfx Abeyl Tgasneu Z-chassis with cranked design Continuous 5 mm Hardox steel HB450 floor Front wall and side walls 4 / 3 mm Hardox steel HB450 Sloped front wall, interior with access ladder Double-wing portal doors, pneumatic rear release Heavy-duty roof roll tarp with CENTRAL LOCKING HYVA tipping cylinder Type Alpha, suitable for high and low pressure Full-load crank landing gear 2x air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle is a lift axle with starting aid WABCO Trailer EBS with RSS anti-skid protection WABCO Smartboard Automatic tipping lowering system Lifting and lowering device Tyres: 385/65 R 22.5 Aluminum access ladder Shovel and broom holder Toolbox on the right 4x LED reversing lights RENTING is the new BUYING – available immediately from us, also with FULL-SERVICE RENTAL

Condition: used, maximum load weight: 34,130 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 55 m³, total width: 2,550 mm, total height: 3,822 mm, Year of construction: 2024, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 55 cbm "X-Shape" First registration: 10/2024, condition: like NEW Mileage: 62,270 km Dimensions inside (LxWxH): 10,149 x 2,350 / 2,450 x 2,285 mm (conical design in width) Unladen weight: only 7,820 kg Z-chassis, cranked version Floor made entirely of 5 mm Hardox steel HB450 Front wall and side walls: 4 / 3 mm Hardox steel HB450 Sloped front wall, interior access ladder 2-wing rear portal doors with pneumatic remote unlocking GRAIN SLIDE with dust protection bag Reinforced roll-over tarpaulin HYVA tipping cylinder, type Alpha, suitable for high and low pressure Crank landing legs, rated for full load 2x pneumatic vibrators under the body SAF axles with large 430 mm disc brakes 1st axle is a LIFT AXLE with starting aid WABCO trailer EBS with RSS roll stability control WABCO Smartboard Redpfx Abjyl Tfvonju Automatic tipping lowering system Hydraulic lift and lowering device Tyres: 385/65 R 22.5 ALCOA Dura-Bright high-gloss aluminium wheels Aluminium access ladder Shovel and broom holder Right-hand toolbox 4x LED reverse lights RENTING is the new BUYING – also available from us as a FULL-SERVICE RENTAL, immediately available-----

Condition: used, maximum load weight: 29,630 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2019, next inspection (TÜV): 03/2027, loading space length: 1,055 mm, loading space width: 2,360 mm, loading space height: 2,160 mm, loading space volume: 53 m³, total width: 2,550 mm, total height: 3,829 mm, Year of construction: 2019, Equipment: ABS, 3-Axle STAS S 300CX ALU Tipping Trailer MultiSTAR-V100 VIN: 000737 Chassis / Attachments: * Air suspension / raising and lowering * Lift axle, 1st axle * Jost landing legs * WABCO Smart Board * Alcoa Dura-Bright aluminum rims * Tires: 385/65 R 22.5 * Tire tread remaining: Front ~60/50%, Middle ~90/80%, Rear ~90% * 3 x SAF tridem axles with disc brakes * 1 x PVC tool box * 2 x work lights * ALU chassis Body: * Aluminum box tipper * EDBRO front cylinder * Capacity: approx. 53 m³ * Floor plate: 8 mm * Fixed walkway, access on the left * Combo door can be opened to the left + pendulum function * Manual locking * Roll cover * Extendable rear ladder under tipper body Weights: * Gross weight: 36,000 kg Redpfx Abjyw Dntsnsu * Payload: 29,630 kg * Tare weight: 6,370 kg Other: * German registration * 1 previous owner * MOT & Safety Inspection 09 / 2026 ---- New main inspections, safety checks or weight reductions/increases available on request. We are happy to assist you in obtaining export/transfer plates, and can also arrange transfer of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing or typographical errors. Subject to changes, prior sale, and errors! Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On 11,000 m², we offer a wide range of vehicles. Our corporate philosophy stands for fairness and reliability. Customer satisfaction is particularly important to us, so we offer our customers an excellent all-round service package and provide a competent contact person who will support you with the purchase or sale of vehicles. See for yourself! Our service for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Organizing special transports We are happy to help you organize special transports. Temporary/export license plates We are happy to help you obtain export or short-term license plates. Handling customs formalities We are happy to assist you with customs procedures.

Condition: used, maximum load weight: 32,246 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, STAS 3-Axle Hardox Steel Tipper 86 m³ First Registration 04/2025 Internal Dimensions (LxWxH): 13,110 x 2,350 / 2,450 x 2,770 mm (tapered design) Unladen weight: 9,640 kg Floor made entirely of 5 mm Hardox steel HB450 Front and side walls made of 3 mm Hardox steel HB450 Pneumatically folding rear underrun protection Straight front wall, with interior access ladder Rear portal doors 50:50 with pneumatic sequential unlocking Reinforced roof tarpaulin HYVA tipping cylinder, Alpha type, low pressure 2x pneumatic vibrators Rjdpfx Absygdvhonju JOST crank landing gears, full load SAF axles with large 430 mm disc brakes 1st axle: LIFT AXLE WABCO Trailer EBS with RSS roll stability control WABCO Smartboard Lifting and lowering device Automatic tipping lowering function Tyres: 6 x 385/55 R 22.5 ALCOA Dura-Bright high-gloss aluminium rims Aluminium access ladder Shovel and broom holder Left side toolbox 4x LED reversing lights RENTING is the new BUYING – also available immediately with full-service rental.

Condition: used, empty load weight: 9,757 kg, maximum load weight: 32,243 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 10/2025, next inspection (TÜV): 10/2026, loading space length: 13,127 mm, loading space width: 2,325 mm, loading space height: 2,755 mm, total length: 25,500 mm, total width: 39,570 mm, total height: 138,420 mm, suspension: air, tire size: 385/55 R 22.5, Year of construction: 2025, mileage: 1 km, front tire size: 385/55 R 22.5, rear tire size: 385/55 R 22.5, emission class: none, Equipment: ABS, ABS, axle manufacturer SAF, color black, air suspension with lift axle, grain chute, lifting and lowering function, tipping body (dumper), lift axle on 1st and 3rd axle, roll tarpaulin, disc brakes, fixed side underrun protection, steel body, 1 storage box, foldable rear underrun protection, Duomatic coupling, load gauge, 2x 7-pin + 15-pin power connectors, working platform, Wabco SmartBoard, side LED work lights, pneumatic remote release, pneumatically foldable rear underrun protection, automatic lowering when tipping, Alcoa Dura-Bright wheels, single-wheel mudguards, broom and shovel holder, 2x LED reversing lights, aluminum ladder. Rsdpfxoydfvqj Abnju