Used Stas Agrostar Semitrailers for sale (74)

Condition: used, maximum load weight: 27,400 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 10/1996, Year of construction: 1996, Equipment: ABS, * STAS 0-34/3A tipper trailer with dump body (40 m3) * Year of manufacture: 1996 * Lift axle * Tipper internal length: 8.70 m * Tipper internal width: 2.40 m * Tipper internal height: 1.85 m * Tare weight: 6600 kg - Gross vehicle weight: 34000 kg * Payload: 27400 kg - Wheelbase: 4500/1325/1325 mm * All information is subject to change without notice * Errors and prior sale excepted Godpfx Ajzrklrefdjkc

Condition: used, maximum load weight: 35,260 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 03/2015, next inspection (TÜV): 06/2027, loading space volume: 24 m³, total length: 7,250 mm, total width: 2,200 mm, total height: 1,410 mm, Equipment: ABS, Vehicle number: P19467 WhatsApp: AI-supported, forwarding to the relevant contact person in your language * 3 axles * Full air suspension * ABS Gedpozuhxhsfx Afdskc * STAS body * Lift axle * Storage compartment * Disc brakes * Aluminum tipper body * Electric roll cover * Rear tipper * SAF axles * Tires - 1st axle 385/65R22.5 * Tires - 2nd axle 385/65R22.5 * Tires - 3rd axle 385/65R22.5 * TÜV (technical inspection) valid until 06-2027 * 24 m³ Sale of a used vehicle in its current condition exclusively to commercial businesses or for export. Sale subject to exclusion of liability for material defects (§ 444 BGB). No guarantee or warranty. Subsequent claims are excluded. Inspection and test drive before purchase are highly recommended. No guarantee for the function of special equipment/extras. Logos/advertising graphics on the photos may have been edited. Errors, input errors, and prior sale are subject to change. We will gladly advise you in German, English, Greek, Russian, Croatian, Italian, Spanish, French, Turkish, Romanian, and Arabic.

Condition: used, maximum load weight: 29,990 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space volume: 52 m³, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, Chassis type: V-Chassis Kingpin load National (t): 12 Axle load National (t): 8 Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2475 Chassis series: 090 Technically permissible total weight: 39=12+9+9+9 Internal height front (mm) (IHF): 2165 Internal height rear (mm) (IHB): 2165 Volume (m³): 51.8 Overall width (mm): 2550 Wheelbase (mm) (WB): 6800 Overall length (mm): 10656 Chassis Chassis material: Aluminium Tire size: 385/65R22.5 Loading length (mm): 9665 Axle manufacturer: JOST (STAS manufacturer choice) Wheel offset (ET): 120 Option: 1st axle with lift axle and traction aid Activation of traction aid via button in the truck (installation of button not included in standard equipment) and by pressing the brake pedal three times Option: 3rd axle with lift axle and Optiturn Activation of additional lift axle control via Wabco Smartboard Brake pad wear indicator connected Tire pressure monitoring: Wabco Trailerpulse Air suspension: ECAS with lift and lower valve Automatic lowering of air suspension during tipping operation, can be manually locked via Smartboard as well as via switch on the chassis Pneumatic coupling head: European palm coupling Tire brand: Manufacturer's choice Wheels: Alcoa Dura Bright Type of tires: Regional distance Wheel nuts: Open Wheel nut caps: Chrome with STAS logo Landing gears: Weweler, steel gearbox landing gears, type Weweler, with compensation feet, single-side operation and 2 speed levels Underrun protection operation: Manual Mudflap underrun protection: Black with STAS logo, mounted across the full width of the underrun protection Mudflap underrun protection attachment: Fixed Underrun protection cover: With covers Handle on underrun protection Control console: EBS control on the left in direction of travel, in front of the axles Toolbox Position toolbox: Left in direction of travel, in front of axles Toolbox material (left, in front of axles): Plastic Toolbox dimensions (left, in front of axles): 860x520x500 Fender type: Domar STAS with white line Number of mudflaps on fender: 2 pcs Fender mudflap type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (activated by switch): 2 pcs LED reversing lights at rear left and right, mounted on the last cross member of the chassis (controlled by reversing signal) Work light position (activated by switch): 2 pcs LED reversing lights left and right at the front in direction of travel, mounted in the area of the landing gears Tipping cylinder manufacturer: Hyva (STAS manufacturer choice) Type of tipping cylinder: Hydraulic cylinder with large casing Tipping cylinder angle: Normal ±47° Tipping cylinder model: Hyva - FC 169 Tipping cylinder stroke: 7130 Tipping cylinder max. pressure: 250 Cylinder stage surface treatment: Standard treatment Hydraulic coupling: Rotary coupling Hydraulic coupling size: 1 Hydraulic coupling gender: Female Hydraulic coupling hose: 2,500 mm Smartboard type: Standard Air connection: Left in direction of travel, on lamp bracket Aluminum access ladder: 3 m - right in direction of travel Mounting of access ladder: for rear entry with hooks for hanging Gksdpjupqi Esfx Afdjc Broom and shovel holder: Three holders each, mounted on the chassis to the left in direction of travel Two plastic wheel chocks incl. holder Chassis-to-body securing device: Rubber cushions (not for FSS 74 and 86) Air and electrical console: Mounted on the right in direction of travel Body A-board on tipper (not f

Condition: used, maximum load weight: 32,950 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space length: 10,450 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, loading space volume: 54 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-Axle Stas S 300CX Tipping Semi-Trailer VIN: 080246 Chassis / Components: * Air suspension / Raise and lower function * Lift axle, 1st axle * Weweler supports * WABCO Smart Board * Alcoa aluminum rims * Tires: 385/65 R.22.5 * Remaining tire tread: 1=90% 2=like new 3=90% * 3 x Jost axles with disc brakes * 2x PVC storage box * 2x Work lights * Aluminum chassis Body: * Tipping semi-trailer * Hyva tipping cylinder, max. 220 bar * Volume: approx. 54 m³ * 2x pneumatic locking * Roller cover * Standing platform at the front * Portal doors 50:50 Weights: * Gross weight: 39,000 kg * Payload: 32,950 kg Godpfx Aeyl N N Djfdskc * Tare weight: 6,050 kg Other: * German registration * New MOT / safety inspection available upon request New main inspections / safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transportation of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Temporary registration / Export license plates We will gladly assist you in obtaining export license plates/short-term registration. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: used, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2015, Equipment: ABS, Visit our website, where you will find our complete inventory with many more photos and information in several languages. Gedpfxez Rr Uko Afdskc SEL 8921 Stas S0ZX Lift axle OVERVIEW First registration: 25.06.2015 Country of registration: Germany Color: White First owner SPECIFICATIONS Technically permissible gross weight (kg): 42,000 Permissible total weight (kg): 42,000 Unladen weight (kg): 7.8 VIN: YE6S0ZXF0000317 TIRES AND AXLES Axle configuration: 3 axles Axle 1: 385/65 R 22.5 | Air suspension | Disc brake | Manufacturer: SAF | Lift axle Axle 2: 385/65 R 22.5 | Air suspension | Disc brake | Manufacturer: SAF Axle 3: 385/65 R 22.5 | Air suspension | Disc brake | Manufacturer: SAF BODY Internal dimensions Length (m): 13500 VEHICLE DOCUMENTS & INSPECTION Vehicle documents: Germany Registration certificate (Schein) Vehicle title (Brief) Certificate of Conformity (COC) Our vehicles are sold in their current condition. We invite customers to visit our company to personally inspect the condition of the vehicle. In addition, we offer the possibility of a test drive. Please note that the batteries delivered with the vehicle are the ones currently installed. If the customer wishes to have new batteries, we can provide price information. CONTACTS Michele Bufano Italian, German, English m. Joana Cordeiro Portuguese, Spanish, Italian, English, German 0049 1 j. Liza Obodynska Ukrainian, Russian, English Jovana Marjanovic Bosnian, German, English j.

Condition: used, maximum load weight: 33,370 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2014, loading space length: 8,500 mm, loading space width: 2,350 mm, loading space height: 1,500 mm, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,160 mm, Equipment: ABS, Stas S300CX Insulated Asphalt Tipper First Registration MB axles with disc brakes, ABS and EBS Air suspension Smartboard Serial number: YE6S300CXD0001049 Tyres: 385/65 R22.5 35% Gross weight: 39,000 kg, unladen weight: 5,630 kg, payload: 33,370 kg Work platform Roller tarpaulin 3 x grain chutes Foldable underrun protection Gedpfx Ajx Txmijfdokc Box: L-8.50 m, W-2.35 m, H-1.50 m = 30 m³ Built for ADR approval Errors, typographical mistakes, and prior sale excepted.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2017, next inspection (TÜV): 03/2026, Equipment: ABS, Stas S300ZX Moving Floor Trailer 90 m³ * 90 m³ capacity * SAF axles * 1st and 3rd axle liftable * Air suspension * Pneumatic control * Disc brakes * Rolling tarpaulin * Smartboard * Double-wing rear door with rotary bar lock * Access ladder and platform at the front wall * ABS connector * 2 x 7-pin electrical connection * ISO pneumatic couplings with red and yellow coupling heads Gkedexyciljpfx Afdjc * 21 planks * Lashing rings on the sides of the loading area * Foldable rear light guards * Load pressure gauge Subject to prior sale and errors excepted! Sale exclusively according to our Terms and Conditions. Important Notice: Despite thorough checking of all details in our offer, errors may occur. Some are caused by transmission faults from various platform providers’ systems. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer within the meaning of §145 BGB. Rather, it contains information for initiating a contract. All details given are without guarantee and do not represent warranted characteristics.

Condition: used, maximum load weight: 28,150 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 04/2021, next inspection (TÜV): 02/2027, loading space length: 13,400 mm, loading space width: 2,480 mm, loading space height: 2,780 mm, loading space volume: 92 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2021, Equipment: ABS, 3-axle STAS S 300ZX sliding floor semi-trailer, 92 m³ VIN: 000929 Chassis / Components: * Air suspension / Raise and lower function * Lift axle 1st + 3rd axle * Weweller support legs * WABCO Smart Board * Alcoa Dura Bright aluminum rims * Tires: 385/65 R.22.5 * Remaining tire tread: Front ~90%, Middle 90/70%, Rear ~90% * 3 x Jost axles with disc brakes * Wabco Smart Board * PVC storage box STAS * 1 x Spare wheel carrier Body: * Sliding floor system Cargo Floor * Service flap (inspection window) on the left * Volume: approx. 92 m³ * Roll-over tarp * Standing platform with walkway on the left * Remote control Weights: * Gross vehicle weight: 36,000 kg * Payload: 28,150 kg * Tare weight: 7,850 kg Other: * German registration * MOT valid until 02/2027 New main inspections / safety checks or weight reductions/increases are possible upon request. We will gladly assist you in obtaining export/transfer license plates; furthermore, we can arrange the transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English, and Russian! No liability for printing and typographical errors, changes, prior sale, and errors. Subject to change! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the preparation and distribution of commercial vehicles, we are a reliable partner for customers worldwide. Godpfxozuqh Ss Afdjkc The particular strength of Leible Nutzfahrzeuge lies in the distribution of new and used commercial vehicles. On an area of 11,000 m², you will find a variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly help you with loading your purchased vehicles. Organization of special transports We will gladly help you with the organization of special transports. Day license plates / Export license plates We will gladly help you obtain export license plates/short-term license plates. Processing of customs formalities We will gladly help you with customs matters.

Condition: used, first registration: 09/2019, Year of construction: 2019, STAS 3 - Full Aluminum Axle - Grain Tipping Semi-Trailer SHAKER / VIBRATOR!!! • ABS • EBS • WABCO SmartBoard • ALCOA rims • 3 x air-suspended 9-ton JOST / SAF axles • Lifting/lowering system • Lift axle (1st axle) • Gross Vehicle Weight: 39,000 kg • Tare weight: 5,710 kg • Payload: 33,290 kg • Tires: 385 / 65 R 22.5 • Tire tread: 80 - 90%! • Platform • Roll tarp • Work lights • Pneumatic rear door release • Automatic / pneumatic venting during tipping • Overall length of the trailer: 10,227 mm Gkjdpfsz Ezu Isx Afdjc • Volume: 55 cubic meters - 1st owner - German trailer - Valid inspection certificate (HU / TÜV): new! Errors and prior sale excepted! = Further information = Tare weight: 5,710 kg

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,460 mm, loading space height: 2,165 mm, loading space volume: 47 m³, Equipment: ABS, Tipping semi-trailer, ALUMINIUM chassis, Jost axle units 22.5" / off road, 3x9 tons with air suspension, 1st axle lift with starting aid and electric actuation, lifting and lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with tyres size 385 / 65 R22.5 on STEEL, 2" kingpin screwed into a steel frame. Lowering valve for air suspension, Wabco Smartboard, brake wear indicator, 6 wheels with size 385 / 65 R22.5 tires on STEEL, 2" kingpin screwed into a 10 mm thick plate, mech. version of the seat posts with one-sided operation, brake system according to E.E.G. standard, two-line system, spring system, brake system according to E.E.G. standard. standard, two-line system, spring accumulator acting on two axles and EBS -E system Wabco with RSS system (Roll-Stability-Support), aluminum air reservoir, electrical system according to STVZO with 2 five-chamber lights type Aspöck, 24 volt system, aluminum body, hydraulics make Edbro with approx. 2 m hydraulic hose, 6 PVC mudguards with rubber mud flaps, side collision protection, underride protection, walkway on the frame, fully welded, LL rubber seal, spindle locks on the rear door, skip also mud-tight on request! Combi door 2/3-1/3 divided with grain slider and autom. pneum. Locking Gkjdpou Dvw Sofx Afdsc FURTHER EQUIPMENT CAN ALSO BE ORDERED ON REQUEST COLOR FREELY SELECTABLE +590¤ transfer costs Also available in the variants Z9-Z13 *Pictures and offers are subject to change*

Condition: used, maximum load weight: 30,060 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 9,665 mm, loading space volume: 52 m³, Year of construction: 2024, Equipment: ABS, Kingpin load: National 12 t Axle load: National 8 t Axle spacing: 1310-1310 mm Fifth wheel height: 1150 mm Chassis width: 1400 mm Internal height: Front 2165 mm Internal height: Rear 2165 mm Overall width: 2550 mm Wheelbase: 6800 mm Overall length: 10656 mm Chassis material: Aluminum Tires: 385/65R22.5 Loading length: 9665 mm Axles: SAF Brake type: SAF - SBS 2220 Offset: 120 Option: 1st axle with lift axle and traction aid Activation of traction aid: Via a button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times. Brake pad wear indicator: Not connected Tire pressure monitoring system (Tire Pilot) Without Tire pressure monitoring: Wabco Trailerpulse ECAS air suspension with raising and lowering valve Air suspension lowering: Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis Pneumatic coupling head: European Palm coupling Chrome wheel nut caps with STAS logo Landing gear: Aluminum drop legs mounted at the front of the chassis, with individual controls on both sides, support force 20 t/P Underrun protection control: Manual Towing eye: 1x in the direction of travel Underrun protection mud flaps: Black with STAS logo Underrun protection cover: Handle on the underrun protection EBS control panel: Control panel: In the direction of travel, in front of the axles Toolbox position: On the left in the direction of travel, in front of the axles: Plastic Toolbox dimensions: Left in front of the axles: 860 x 520 x 500 Type of fender: Domar STAS with white line Number of mud flaps on the fender 2x Mudguard type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (switch operated) Position of work lights (switch operated) 2x LED reversing lights, front, left and right, in the area of the landing gear Tilt cylinder manufacturer: Hyva Tilt cylinder type: Hydraulic cylinder with large casing Tilt cylinder model: Hyva - FC 169 Tilt cylinder stroke: 7130 Tilt cylinder max. pressure: 250 Gkedpfxouar Ame Afdoc Surface treatment of cylinder stages: Standard surface treatment Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminum leaning ladder 3 m Left-hand ladder attachment for rear entry: With hook for hanging Position of broom and shovel holder: With 3 holders each, on the chassis on the left in the direction of travel Loading pressure gauge Ø 100 mm - mounted on the front of the chassis With two Plastic wheel chocks including bracket Chassis safety device - body rubber pads Air and electrical console, centered in the direction of travel, with boom End wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type combi-door Inner lower chord profile inclination (°) 90 Floor 8 mm aluminum - 110 Brinell Position of rubber pads below the floor cross members End wall 4 mm (aluminum) Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall aluminum Combi-door type 1/2 - 1/2 with pivoting door end cross member Door leaf opening: Right door leaf opens first (STAS manufacturer's choice) Door end cross member: Pivoting design Hinge type: With double door hinge (double-joint hinge) Slider: Rectangular design, standard Slider position 2 sliders with operating handles, one each on the left and right in the direction of travel. Securing the open door leaves. The

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2017, next inspection (TÜV): 09/2026, loading space length: 13,179 mm, loading space width: 2,500 mm, loading space height: 2,800 mm, Equipment: ABS, * Stas walking floor trailer * Tarp cover Gsdpfx Ajxu Th Usfdokc * Alloy wheels * SAF axles * Unladen weight: 7,790 kg * Year of manufacture: Internal vehicle number: 11498-----Errors and prior sale reserved.

Condition: used, maximum load weight: 27,910 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2014, Equipment: ABS, German semi-trailer, first owner, good condition. Gkedpfx Afsy Ubg Isdsc STAS S 300 ZX walking floor semi-trailer, CargoFloor floor with cable remote control, SAF axles with disc brakes, first axle is a lift axle, portal doors with rotary latch + pneumatic locking, work platform, roll tarp, 1x plastic toolbox, spare wheel holder, rear step ladder, Wabco SmartBoard, air suspension with raising/lowering function, ABS, EBS, electrical connections: 1x 15-pin and 2x 7-pin, etc. Tire size: 385 / 65 R 22.5, tread depth: 14 / 14 / 13 / 11 / 8 / 6 mm Permissible total weight: 36,000 kg / Unladen weight: 8,090 kg / Payload: 27,910 kg !!! I SPEAK POLISH !!! WE SPEAK ENGLISH !!!

Condition: used, maximum load weight: 29,630 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 03/2019, next inspection (TÜV): 03/2027, loading space length: 1,055 mm, loading space width: 2,360 mm, loading space height: 2,160 mm, loading space volume: 53 m³, total width: 2,550 mm, total height: 3,829 mm, Year of construction: 2019, Equipment: ABS, 3-axle STAS S 300CX aluminum tipper body, MultiSTAR-V100 VIN: 000737 Chassis / Components: * Air suspension / Raise and lower function * Lift axle, 1st axle * Jost support legs * WABCO Smart Board * Alcoa Dura Bright aluminum rims * Tires: 385/65 R.22,5 * Remaining tire tread: Front ~60/50%, Rear ~90/80%, Trailer ~90% * 3 x SAF tridem axles with disc brakes * 1 x PVC storage box * 2 x work lights * Aluminum chassis Body: * Aluminum box tipper body * EDBRO front supports * Volume: approx. 53 m³ * Floor plate 8 mm * Fixed walkway, access on the left side * Combination door, opens to the left + swing * Manual locking * Roll cover * Extendable rear ladder under the tipper body Weights: * Gross vehicle weight: 36,000 kg * Payload: 29,630 kg * Tare weight: 6,370 kg Other: * German registration * 1 previous owner Gjdsyw Dntopfx Afdokc * Valid MOT (technical inspection) New main inspections / safety checks or weight reductions / increases are possible upon request. We will gladly assist you in obtaining export / temporary registration plates; transportation of your purchased vehicles within Germany is also possible. Contact us! We speak the following languages: German, English, and Russian! No liability for printing & typographical errors, changes, prior sale, and errors. Subject to change! Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A wide variety of vehicles can be found on 11,000 m². Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transport We will gladly assist you in organizing special transport. Temporary registration plates / export registration plates We will gladly assist you in obtaining export registration plates / short-term registration plates. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: used, maximum load weight: 30,140 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2014, next inspection (TÜV): 07/2026, loading space length: 10,500 mm, loading space width: 2,500 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Year of construction: 2014, Equipment: ABS, Well-maintained aluminum box body, Stas S300CX, for grain transport. Features: Lift axle Gedpfx Aozmdbpefdjkc Platform at the front wall Roll-up tarpaulin Grain sack Grain slide Combination rear door with 1/3 and 2/3 opening Foldable rear underrun protection Lateral underrun protection Toolbox For questions regarding the equipment, please call. Errors and prior sale excepted!

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, -Panama Plane 900g -10 mm floor -V-shaped sheet metal 2000x1500x4 -Service door on the front panel -12 pairs of lashing eyes on the front panel Chassis: Design with continuous, reinforced chassis, new body manufactured in a self-supporting design with corresponding reinforcements in the lower chord for particularly high stability and strength, cross members 140 mm high, reinforced design Axle and suspension: Disc brake 22.5 Jost axle assembly, 3*9 tons with DCA - air suspension, lift and lower function, Wabco Smartboard, electronic brake wear indicator BVA, 1st axle with start assist (without SZM equipment) Tires and wheels: 6 wheels with tires size 385/65 R 22.5, premium tires, on steel rims, 11.75*22.5 ET 120 Kingpin: Mechanical support winch, 2x20 tons support load Braking system: EBS E system Wabco with RSS system (Roll Stability Support) and premium modulator, spring brake system acting on two axles with operation at the rear Electrical system: According to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the aluminum rear panel, 24 Volt system with 1*15-pole and 2*7-pole socket, with side marker lights in LED design 2 separate LED reversing lights integrated in the U-shaped protection, Gsdpjfi Nmpsfx Afdskc Body/tipper bed: "Body fully welded inside", reinforced side walls Aluminum tipper bed, side walls with 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide, completely welded with lower and upper chord, plank profiles fully welded inside, aluminum front panel with 600 mm plank profile, 2-3 mm thick, in a straight design, with 2 aluminum wing doors 50/30 mm thick, sliding residual unloading wall with Kevlar sheet approx. 1,500 mm long plus side Kevlar seal Hydraulic system: "Cargo Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles, mounted with approx. 880 PE-HD gliders, type CF 8 mm floor design, fixed parts on the front panel, separate possibility for connecting the hydraulic line under the vehicle with fixed parts, operating pressure 190 - max. 240 bar, aluminum end pieces welded into the sliding floor, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 1 aluminum spare wheel holder, side aluminum approach guard in foldable design, 1 toolbox approx. 860*460*400 mm in plastic, 3.7m aluminum ladder, tarpaulin approx. 660g/m2 with tarpaulin system incl. tarpaulin rail, with side tension straps or quick release fastener, walkway on the front panel with access ladder, 3 steel locking bars with locking mechanism, swiveling and lockable, aluminum protective cover with hinges for the lighting, etc. +590¤ Delivery costs Unladen weight: approx. 7,700 kg Offer and images subject to change.

Condition: used, maximum load weight: 35,580 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 05/2021, loading space length: 10,485 mm, loading space width: 2,474 mm, loading space height: 1,895 mm, loading space volume: 49 m³, Equipment: ABS, STAS S300CX 49 m³ In operation since 5/2021 Lifting axle ADR: EXII, FL, OX, AT Loading area: 10,485 x 2,474 x 1,895 mm Wheelbase 1,410 mm Axles 9 tonnes SAF axles Combination door Tarpaulin Disc brakes Gjdpfx Afsw I Ivzjdskc Tyres 385/65 R22.5 Condition: 1st axle 10 mm 2nd axle 11 mm 3rd axle 12 mm Spare wheel Operating weight 6,420 kg Gross weight 42,000 kg NEARLY NEW? ONLY USED FOR AGRICULTURAL PRODUCTS! More at: FB: Dvorak Trucks Czechia IMPORT-EXPORT-SALE-PURCHASE-COMMISSION SALE OF TRUCKS AND CONSTRUCTION MACHINERY TRUCK SERVICE TYRE SERVICE TRUCK WASH TACHOGRAPH INSPECTION

Condition: used, maximum load weight: 28,760 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2017, next inspection (TÜV): 08/2027, loading space length: 13,530 mm, loading space width: 2,480 mm, loading space height: 2,730 mm, loading space volume: 92 m³, total length: 14,000 mm, total width: 2,550 mm, total height: 3,986 mm, Equipment: ABS, STAS sliding floor, +/- 92 cubic meters, "Cargo-Floor" floor with 21 boards, 6 mm thick, stainless steel wear plate at the rear under the sliding floor, complete discharge (with moving front wall), sliding and retracting function, wireless remote control for the floor, loading pressure gauge, double-wing door with swivel bar lock at the rear, access ladder and platform at the front of the superstructure, tarpaulin cover, ABS / with central locking, EBS, aluminum rims ALCOA, disc brake system, SAF INTRA CD axle(s), 1st axle - lift axle, air suspension with lifting and lowering device, aluminum support legs, the vehicle can be covered with advertising and/or have lettering. SI87197 Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops! The vehicle can be covered with advertising and/or have lettering. Our general delivery and payment terms apply. Gksdpfjz Rr A Usx Afdec We would be happy to prepare a financing or leasing offer for this vehicle. Please do not hesitate to contact us!

Condition: used, maximum load weight: 32,170 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2020, loading space length: 8,550 mm, loading space width: 2,160 mm, loading space height: 1,500 mm, loading space volume: 28 m³, total width: 2,550 mm, total height: 3,060 mm, Equipment: ABS, Stas S300CX First registration: 14-01-2020 Jost/MB axles Lift axle Disc brakes with ABS and EBS Air suspension Smartboard Serial number: YE6S300CXK0002292 Tires: 385/65 R22.5, 35% tread Total weight: 39,000 kg, Tare weight: 6,830 kg, Payload: 32,170 kg Roll-over tarp Foldable under-ride guard Grain discharge chute Work platform Godpfx Aszg Rt Sofdokc Body: L-8.55 m, W-2.16 m, H-1.50 m = 28 m3 Built for ADR approval Errors/typos and prior sale are subject to change.

Condition: used, maximum load weight: 32,135 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2020, loading space length: 8,550 mm, loading space width: 2,160 mm, loading space height: 1,500 mm, loading space volume: 28 m³, total width: 2,550 mm, total height: 3,060 mm, Equipment: ABS, Stas S300CX First registration: 14-01-2020 Jost/MB axles Lift axle Disc brakes with ABS and EBS Air suspension Smartboard Serial number: YE6S300CXK0002291 Tires: 385/65 R22.5, 35% tread Total weight: 39,000 kg, Tare weight: 7,000 kg, Payload: 32,000 kg Roll-over tarp Retractable under-run protection Grain discharge chute Work platform Body: L-8.55 m, W-2.16 m, H-1.50 m = 28 m3 Built for ADR approval Errors/typos and prior sale are subject to change. Gkedjzgzaijpfx Afdjc

Condition: used, functionality: fully functional, axle configuration: > 3 axles, first registration: 05/2021, tire condition: 60 %, color: light grey, Year of construction: 2021, Universal gate / Steel chassis / HARDOX body CRAMARO tarpaulin / Pneumatic tires Aluminum rims 26 m3 Gkodpfxsznkv Ne Afdsc

Condition: used, maximum load weight: 32,000 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 01/2020, loading space length: 8,550 mm, loading space width: 2,160 mm, loading space height: 1,500 mm, loading space volume: 28 m³, total width: 2,550 mm, total height: 3,060 mm, Equipment: ABS, Stas S300CX First registration: 14-01-2020 Jost/MB axles Godpfx Afozgpz Iodjkc Lift axle Disc brakes with ABS and EBS Air suspension Smartboard Serial number: YE6S300CXK0002324 Tires: 385/65 R22.5, 35% tread Total weight: 39,000 kg, Tare weight: 7,000 kg, Payload: 32,000 kg Foldable under-ride guard Grain unloading chute Work platform Container: L-8.55 m, W-2.16 m, H-1.50 m = 28 m3 Built for ADR approval Errors/typos and prior sale reserved.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 09/2026, loading space length: 10,149 mm, loading space width: 2,325 mm, loading space height: 2,285 mm, loading space volume: 55 m³, Year of construction: 2023, Equipment: ABS, ferroSTAR 54.9 cbm iron gray Chassis type: Z-chassis Axle distance (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2325 Technically permissible total weight: 39 = 12 + 9 + 9 + 9 Interior height front (mm) (IHF): 2285 Interior height rear (mm) (IHB): 2285 Volume (m³): 54.9 Overall width (mm): 2550 Wheelbase (mm) (WB): 6600 Overall length (mm): 11520.836 Chassis material: Steel Tire dimension: 385/65R22.5 Loading length (mm): 10149 Axle manufacturer: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 Offset (ET): 120 Option 1: Axle with lift axle and starting aid Activation of starting aid: via button in the truck (installation of the button is not included in the scope of supply) and by pressing the brake pedal three times Air suspension: ECAS with lifting and lowering valve Lowering of air suspension: Automatic lowering of the air suspension during tilting, can be manually locked via the Smartboard, as well as a switch on the chassis Coupling head: Pneumatic, European Palm coupling Tire brand: Manufacturer's choice Rims: Steel Tire type: Regional Wheel nuts: Open Wheel nut caps: Plastic Outrigger supports: Aluminum drop-leg supports, mounted at the front of the chassis, with individual operation on both sides, supporting force 20t / pair Gedpfxozmcn Uj Afdskc Operation of underride protection: Manual Position of Smartboard: On the left side, in the direction of travel, in front of the axles Toolbox: On the left side, in the direction of travel, in front of the axles Spare wheel holder: On the right side, in the direction of travel, below the chassis Number of splash guards on the fender: 2 pieces Type of splash guard on the fender: Clear Pass Manufacturer of lighting: Aspöck Type of lighting: ECOLED II Work lights (operated via switch): Included Position of work lights (operated via switch): 2 LED reversing lights at the rear, on the left and right in the direction of travel, mounted on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights at the front, on the left and right in the direction of travel, mounted in the area of the outrigger supports Manufacturer of tilting cylinder: Hyva (STAS manufacturer's choice) Type of tilting cylinder: Hydraulic cylinder with small housing Cylinder tilting angle: Normal Model of tilting cylinder: Hyva - FC 169 Stroke of tilting cylinder: 7130 Hydraulic coupling: Swivel coupling Hydraulic coupling - Size: 1 Hydraulic coupling - Gender: Female Hydraulic coupling - Hose: 2,100 mm Type of Smartboard: ECAS control box Aluminum ladder: With 2.8 m length, mounted on the right in the direction of travel Broom and shovel holder: Included Position of broom and shovel holder: With 3 holders each, mounted on the chassis on the left in the direction of travel Position of broom and shovel holder: On the front wall, on the left in the direction of travel Load manometer: Ø 63 mm - mounted on the side of the instrument panel Splash guard for underride protection: Black with STAS logo, mounted across the entire width of the underride protection Mounting of splash guard for underride protection: Flexible Plastic support wedges: With two plastic support wedges including holder Air and electrical console: Mounted on the right in the direction of travel Rear wall type: Swing doors A-sign: Foldable on the rear wall, mounted on the right in the direction of travel Floor: Made of 6 mm HB450 Position of rubber supports: Mounted below the floor

Condition: used, axle configuration: 3 axles, first registration: 05/2012, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2012, Axle configuration Tire size: 385/65 R22.5 Axle brand: Mercedes-Benz Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; tire tread depth left: 8 mm; tire tread depth right: 5 mm Rear axle 2: Tire tread depth left: 7 mm; tire tread depth right: 7 mm Rear axle 3: Tire tread depth left: 10 mm; tire tread depth right: 10 mm Gkodpozxmnisfx Afdjc Weights Unladen weight: 5,890 kg Payload: 32,110 kg GVW: 38,000 kg Condition Damage: None

Condition: used, overall weight: 39,000 kg, first registration: 01/2013, next inspection (TÜV): 07/2025, Equipment: ABS, Volume tipper 59 cubic meters Full aluminum Empty weight 7570 kg SAF axles with disc brakes Tires 60% Good condition Gkjdpfx Aovwhvpjfdec Belgian registration Price 23,900 euros net