Used Goldhofer Lowbed for sale (572)

Condition: new, empty load weight: 10,700 kg, maximum load weight: 38,800 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17,5, color: grey-black, Equipment: ABS, Gooseneck: •Gooseneck with bevelled corners at the front 45° and with a rear bevel of approx. 750 mm x 10° •3 pairs of lashing rings •Hardwood flooring 30 mm thick Iodpfxehlz S Ne Aa Hsia Loading area in extendable version: •Loading area in extendable version with rear bevel of approx. 1,000 mm x 8° •Cutouts in the outer frame of the loading area for hanging tensioning straps •Hardwood flooring approx. 48 mm thick, checkered sheet covering over the axles Two-part steel ramps: •One pair of galvanised, two-part steel ramps with approx. 48 mm thick hardwood flooring •Ramp with hydraulically foldable and unfoldable ramp parts, hydraulic lifting mechanism and hydraulically movable •Maximum load per pair: approx. 40,000 kg Axles and Tires: •BPW axles and suspension, 2 axles rigid, 1 axle with self-steering •Technical axle load: 12,000 kg •Electro-magnetic reversing lock can be activated via reverse gear and manually •Air suspension with lifting and lowering valve •Axle tool •235/75 R 17.5 3PMSF Brake system: •WABCO brake system in accordance with EU regulations with EBS-E Paintwork: •First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component zinc dust primer •A high-quality 2-component top coat in one color in MB 7350 Nova gray •Rear section metallized and painted in RAL 9010 Seatposts: •JOST seatposts with 2-speed gearbox for 24t lifting load (50t test load). Steel construction: •Steel construction made of high-strength fine-grain steel •Steel qualities: •S355J2+N/S355MC •S690QL/S700MC Electrical system: •Electrical system in accordance with EU regulations, 24 volt lighting •ASPÖCK-UNIBOX on the front connection panel with 24N, 24S & 15-pin sockets Accessories included: •A spare wheel with holder •A galvanized steel bulkhead approx. 400 mm high •Yellow-red air couplings on the galvanized front connection panel •4 wheel chocks •A bracket for a rotating beacon at the rear of the trailer •Mounting in the rear area of the gooseneck for aluminum docking ramps •Galvanized folding supports under the bevel of the loading area •Cover plates to bridge the space between the ramps and the loading area •White Reflective tape in accordance with EU regulations on the side, on the extension and at the rear, red •Electro-hydraulic unit at the rear, under the loading area •A holder for the warning signs including a socket on the gooseneck and on the ramps on the left and right •Control valves for the ramps attached to the right-hand side of the trailer •ALU side walls and rear wall on the gooseneck, approx. 2,440 x 400 mm •The rear, galvanized plug-in stanchions are removable (length of the structure approx. 2,560 mm) •Four warning signs extendable by approx. 400 mm with a position light •3 pairs of WADER container pockets in the loading area for a 20ft, 30ft or 40ft container •6 pairs of stanchion pockets (100x50 mm) in the outer frame of the loading area •Galvanized extensions, extendable by approx. 230 mm each Page •Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area bevel •A painted layer of sand on the checker plates, above the kingpin and the loading area as anti-slip protection •Load pressure gauge for determining the axle loads including load diagram •HRM metallization (High Resistance Metallization) of the outer frame •Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: new, empty load weight: 15,550 kg, maximum load weight: 47,450 kg, overall weight: 63,000 kg, axle configuration: 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm -Rear gooseneck with bevel approx. 1,000 mm x 10° Loading area: -Loading area in extendable design, length approx. 8,800 mm, with bevel at the rear approx. 500 mm x 10° -One recess protruding into the loading surface and into the chamfer to accommodate the excavator dipper arm -Pneumatic locking with conical locking pins and reinforced locking positions -Hardwood covering on the bevel of the loading area Ramps: -1 Pair of two-part steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm -Ramps with hardwood decking -Hydraulically folding ramp tips -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -Square climbing ledges 20 x 30 mm, approx. every 200 mm on the outer frame of the ramp Axles and suspension: -BPW axles and suspension, 1st axle with preload steering, all other axles with forced hydromechanical steering -Technical axle load: 12,000 kg -1st axle with electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -235/75 R 17.5 twin tires -TPMS tire monitoring system in accordance with ECE R141 -TPMS tire monitoring sensors mounted in all wheels including spare wheels Accessories included: -steel front wall, pluggable, approx. 400 mm high -3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches -Parking position on the gooseneck for the warning signs when not in use -1 Spare wheel -On the gooseneck 1 pair of plug-in ALU side panels, approx. 400 mm high, anodized -One plug-in ALU rear panel on the gooseneck, approx. 400 mm high, anodized -Approx. 40 mm thick hardwood covering over the gooseneck, checker plate covering over the kingpin -2" kingpin -Guide plate from the gooseneck for the saddle plate, approx. 500 mm wide -4 wheel chocks -Mechanical seat posts with 2-speed gearbox and crank -JOST module B - static test load = 50,000 kg -1 Intermediate table, approx. 300 mm wide -Widenings (galvanized) extendable by approx. 230 mm per side -Wheel recesses with square climbing rails -ALU covers for the wheel recesses -1 pair of mechanical rear supports Isdek Aht Uepfx Aa Heia -Steering can be operated from the front and rear by cable remote control, with tracking control of the axles -1st axle with automatic lift axle function -Central lubrication system with 1 pump, BEKAMAX brand -Radio remote control for operating the self-steering, in addition to the cable remote control, with 2 indicator lights on the receiver as toe-in control -Wabco Smart Board System -4 warning signs, approx. 423 x 423 mm, extendable by approx. 400 mm, incl. 2 position lights and brackets for rotating beacon

Condition: new, empty load weight: 14,800 kg, maximum load weight: 61,700 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: -gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings -Hardwood decking 30 mm thick Loading area: -Loading area in extendable design with rear bevel of approx. 500 mm x 8° -9 pairs of lashing rings can be folded outwards -1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Seat posts: -JOST fifth-wheel supports (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles and suspension, 1st axle self-steering, 2nd + 3rd axle rigid, 4th + 5th axle self-steering. -Technical axle load: 12,000 kg -1.4th and 5th axle with electro-magnetic reverse lock via reverse gear and manual activation -235/75 R 17.5 3PMSF tires Brake system: -WABCO brake system in accordance with EU regulations with EBS-E (4S3M) Paint finish: -First-class and long-lasting corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey -Rear part metallized and painted in RAL 9010 (pure white) Steel construction: -steel construction made from high-strength fine-grained steels -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Accessories: -One spare wheel with holder in front of the bulkhead -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -2 pieces of restraining shoes with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking ramps -Galvanized extensions, extendable by approx. 230 mm on each side -One bracket for a rotating beacon at the rear of the trailer -Galvanized supports under the bevel of the loading area Iiedpfx Asma Hf Rsa Hea -White reflector tape in accordance with EU regulations on the sides, on the pull-out and red at the rear -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) -3 pairs of WADER container pockets in the loading area for a 20ft (30ft) or a 40ft container -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status -Sliding suspension rails for ALU docking ramps at the rear of the vehicle -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the sloping loading area -BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump -Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light -One bracket for rotating beacon on the warning signs -European reflector plates (red/yellow) at the rear of the trailer -Speed stickers 80 km/h at the rear and on both sides -Load manometer to determine the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, empty load weight: 13,500 kg, maximum load weight: 51,500 kg, overall weight: 69,500 kg, axle configuration: > 3 axles, loading space length: 8,800 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r17.5, color: grey, Equipment: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,700 mm Rear gooseneck with bevel approx. 1,000 mm x 10° Cargo bed: Telescopic cargo bed, length approx. 8,800 mm, with rear chamfer approx. 500 mm x 10° Recess in the chamfer and protruding into the loading area to accommodate the excavator dipper arm Pneumatic locking with conical pin and reinforced locking positions The supply lines are protected in the extendable carrier and adapt to the respective loading area length Ramps: 1 pair of two-part steel ramps, approx. 4,350 mm x 900 mm Hydraulically folding ramp tips Ramps can be moved individually hydraulically outwards by approx. 235 mm and inwards by approx. 215 mm Axles and suspension: BPW axles and suspension, two axles rigid, two axles self-steering Electromagnetic reverse lock via reverse gear and can be activated manually Air suspension with lifting and lowering valve Axle tool Tires: 235/75 R17.5 3PMSF dual tires Load index: 143/141J (144/144F) Brake system: WABCO brake system, EBS-E in accordance with EU regulations Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" Metallization: Standard HRM metallization of the outer frame Complete steel construction shot-peened, then the defined visible surfaces hot-finished with ZINACOR 850 (zinc 85% - aluminum 15%) metallization Steel construction: Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welder DIN-EN 287-1 tested MAG welding process according to EN ISO 4063 Shielding gas M21 according to EN ISO 14175 Accessories included: Steel front wall, pluggable, height approx. 400 mm ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets 24N connection in accordance with ISO-118524S connection in accordance with ISO-373115-pin connection in accordance with ISO-12098 Round NATO socket on the front connection strip Cable to supply the electro-hydraulic unit and/or the electric cable winch (35 mm2, 3.5 m long) between trailer and SZM with plug (NATO-NATO) 3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches 1 spare wheel with mounting adapter Outer support of the gooseneck with fastening holes for screw-in lashing ringsThe first hole approx. 200 mm from the front, then approx. every 400 mm 2 pairs of screw-in lashing rings included One fastening hole in the rear upper area of the outer beams of the gooseneck for a screw-in lashing ring 1 pair of screw-in lashing rings Approx. 40 mm thick hardwood covering above the gooseneck Iiodpfok Ahugex Aa Hja On the gooseneck 1 pair of plug-in aluminium drop sides on the side, approx. 400 mm high, anodized One plug-in aluminium rear panel on the gooseneck, approx. 400 mm high, anodized 2" kingpin Guide plate from the gooseneck for the saddle plate, approx. 500 mm wide 4 wheel chocks with holder Holder for ALU docking lights Mech. Saddle supports with 2-speed gearbox and crank Continuous hardwood covering on the cargo bed, interrupted between the axles, approx. 50 mm thick Locking of the cargo bed with conically welded locking profiles every 250 mm incl. pretensioning plate Slotted holes for attachable and movable bridging elements on the front of the cargo bed 1 intermediate table with stepped loading surface, approx. 300 mm wide for the pull-out tube with large cross-section with sheet metal covering Front and rear with Langl

Condition: new, empty load weight: 10,350 kg, maximum load weight: 39,150 kg, overall weight: 49,500 kg, axle configuration: 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Iisdpfxoiu Er Ao Aa Hea Loading area: -telescopic loading area with rear slope approx. 1,000 mm x 8° -1 pair of fixed wheel recesses in front of the axles approx. 2,850 x 970 x 400 mm -Wheel recesses with square climbing strips 15 x 15 mm and widenings in the lower area -A pair of fixed wheel recesses between the 1st and 2nd axles, approx. 1,610 x 970 x 400 mm -3-piece removable galvanized covers over the wheel recesses (W 670 mm) - max. point load 5 to / pc. -Recess in the chamfer and protruding into the loading area to accommodate the excavator dipper stick approx. 2,900 x 750 x 210/290 mm -1 pair of lashing rings lying in the front of the loading area (LC 10,000 daN) -5 pairs of lashing rings foldable outwards (LC 5,000 daN) -2 pairs of lashing rings can be folded outwards (LC 10,000 daN) -2 pairs of lashing rings in the excavator trough (LC 5,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps (LC 2,000 daN) One-piece ALU ramps: -One pair of one-piece ALU ramps approx. 2,500 x 600 mm -Ramp with spring lifting mechanism and manually adjustable -Maximum load per pair: 24,000 kg Axles and tires: -BPW axles and suspension, 2 axles rigid, 1 axle self-steering -Technical axle load: 12,000 kg -Electromagnetic reverse lock via reverse gear and can be activated manually -Air suspension with lifting and lowering valve -axle tool -235/75 R 17.5 tires -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories included: -One spare wheel with holder in front of the bulkhead -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking lights -Galvanized extensions, extendable by approx. 230 mm per side -Galvanized folding supports under the bevel of the cargo bed -One bracket for a rotating beacon at the rear of the trailer -White reflector tape in accordance with EU regulations on the sides, on the pull-out and red at the rear -One bracket for the warning signs including socket on the left and right of the gooseneck and on the rear panel -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) -2 pairs of WADER container pockets in the loading area for a 20ft or 30ft container -3 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -One removable galvanized intermediate table with 1 pair of WADER container pockets -Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope -a layer of sand painted onto the chequer plates on the gooseneck and on the loading area to prevent slipping -Four warning signs approx. 423 x 423 mm, extendable by approx. 400 mm, with a position light -A bracket for a rotating beacon on the warning signs -Speed sticker 80 km/h at the rear and on both sides -Load manometer for determining the axle loads including load diagram -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminium 15%)

Condition: new, empty load weight: 13,250 kg, maximum load weight: 47,550 kg, overall weight: 60,800 kg, axle configuration: > 3 axles, suspension: air, tire size: 245/70 r17.5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform in extendable version: Loading area in extendable version with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings can be folded outwards 3 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Iodpel Uxdkjfx Aa Hoia Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 40,000 kg Seat posts: JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 245/70 R 17.5 Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Coating: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Electrical system: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel end wall approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 4 restraining shoes with holder on the bulkhead One spare wheel with holder in front of the bulkhead Electro-hydraulic unit Re-steering from the front and rear by means of cable remote control operated via pushbuttons with tracking control of the axles Mounting in the rear area of the gooseneck for ALU docking lights European reflector plates (red/yellow) at the rear of the trailer White reflective tape in accordance with EU regulations on the side, on the extension and at the rear Red On the gooseneck and on the ramps on the left and right, a holder for the warning signs including a socket A bracket for a rotating beacon at the rear of the trailer Galvanized folding supports under the sloping loading area Operating valves for the ramps fitted on the right-hand side of the trailer Cover plates to bridge the gap between the ramps and the cargo bed A mud flap at the rear of the trailer Manual and description on USB stick BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm The rear galvanized stanchions are removable Length of the body approx. 2,560 mm One tool box INOX 1,350 x 400 x 400 on the gooseneck Box covered oil filler plug 4 pairs of WADER container pockets in t

Condition: new, empty load weight: 12,900 kg, maximum load weight: 34,100 kg, overall weight: 47,000 kg, axle configuration: 2 axles, loading space length: 6,850 mm, loading space width: 2,540 mm, loading space height: 350 mm, suspension: other, tire size: 245/70 R 17,5, color: grey, operation weight: 12,900 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered hydraulically and removed -Technical fifth wheel load: 23,000 kg -For tractor units: 4 x 2, 6 x 2 and 6 x 4 Loading area: -Low bed with external supports in extendable "SUPER LOW" design, length approx. 6,850 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking Rear chassis: -Rear chassis with closed external frame, checker plate covering and continuous prism excavator trough approx. 1,250/700 x 505 mm, open at the rear -2 pairs of lashing rings that can be folded outwards -1 pair of lashing rings lying in the trough -2 pairs of stake pockets for plug-in stakes 100 x 50 mm in the outer frame Pendulum axle and tires: -"PENDEL-AXLE", all axles hydromechanically forced steered -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint, painted in a single color in "FAY-Gray-34-0260" -Technical axle load: 12,000 kg -Hydraulic axle compensation -Tires 245/70 R 17.5 -TPMS tire pressure monitoring system in accordance with ECE R 141 Accessories: -Preparation for screw-on container positioning for 1x 20ft or 1x40ft container on the outer supports -2" kingpins -A galvanized steel front wall approx. 400 mm high -One spare wheel -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering from the front and rear can be operated using a cable remote control via push buttons, with alignment control of the axles -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Electro-hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and at the rear -European reflector signs (red-yellow) on the rear of the trailer -One holder for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -6 pairs of threaded blocks between the lashing rings under the top strap on the outer support for mounting screwable RUD rings VLBG-4 -ALU side walls and rear wall can be plugged into the gooseneck approx. 2,440 x 400 mm Iisdpfohlz R Sjx Aa Hsa -The rear galvanized plug-in stanchions are removable (Length of the body approx. 2,560 mm) -Gooseneck in the rear upper area closed with a removable cover -5 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area -Foldable extensions, approx. 230 mm per side -2 pairs of screwable RUD rings VLBG-4 M24 (LC 8,000 daN) -1 pair of steel ramps to bridge the hooks of the low bed -A painted layer of sand on the loading area as anti-slip protection -Speed sticker 80 km/h at the rear and on both sides -Dipper handle recess of the rear chassis closed at the rear with a plug-in plate -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm -Radio remote control for the steering in addition to the cable remote control, with indicator lights on the receiver as Alignment control -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 normal grease -Load pressure gauge for determining axle loads -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% - aluminum 15%)

Condition: new, empty load weight: 17,250 kg, maximum load weight: 48,700 kg, overall weight: 66,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,480 mm, loading space height: 375 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 17,250 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and removed hydraulically -For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Low bed: -Low bed with external supports, designed as a telescopic tank bridge in low construction with extension at the front -Length x width approx. 7,550 mm x 2,740 mm -Mechanical locking of the extension Chassis: -Chassis at the rear with closed outer frame -Checker plate covering and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Axles, suspension and tires: -"PENDEL-AXLE", all axles hydromechanically forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint in a single color in "FAY-Gray-34-0260" -Technical axle load 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 Accessories: -Steel bulkhead, plug-in, approx. 400 mm high -4 wheel chocks -Gooseneck in the rear upper area closed with a removable cover -1 pair of steel ramps with climbing strips and fastening bolts to bridge the hooks of the low bed -The ramps can be placed over or between the hooks -Fastening options for the steel ramps at the rear between the outer supports of the gooseneck -One Locking point approximately every 1,000 mm on the extension -1 lashing ring on the left and right on the front cross member -Connection strip for supply lines to the tractor unit, attached at the height of the outer frame profile -6 pairs of threaded blocks on the outside of the inner supports of the loading area for mounting screwable rings M24 -6 pairs of countersunk lashing rings on the outside of the outer supports of the loading area, foldable inwards and outwards -1 pair of threaded blocks at the front and rear of the outer supports of the loading area for mounting screwable rings M24 -Hanging strip for loose aluminum loading ramps on the vehicle's end cross member -Central lubrication system with 2 pumps, BEKAMAX brand -Steering from the front and rear, operated by cable remote control, with alignment control of the axles -3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches Iiodpfsh Hm Tzox Aa Hoa -Removable loading floor (galvanized) in 3 elements can be inserted between the outer supports with hardwood flooring -Foldable extensions, by approx. 230 mm per side -Extension planks, loose, framed in steel -4 warning signs approx. 423 x 423 mm -Radio remote control for operating the steering -3.5" king pin -Anti-slip sticker on the left bevel of the gooseneck -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Guide plate from the gooseneck for the fifth wheel plate, approx. 800 mm wide -1 spare wheel with mounting adapter -Parking position on the gooseneck for the warning signs when not in use -2 pairs of stake pockets embedded in the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm -Dipper handle recess of the rear chassis closed at the back with a plug-in plate -Color of the trailer MB 7350 Novagrau

Condition: new, maximum load weight: 49,000 kg, overall weight: 60,800 kg, axle configuration: > 3 axles, loading space length: 9,300 mm, loading space width: 2,540 mm, loading space height: 860 mm, suspension: air, tire size: 235/75 r 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck with beveled corners at the front 45° and with rear bevel of approx. 750 mm x 10° -3 pairs of lashing rings (LC 5,000 daN) -Hardwood decking 30 mm thick Loading area in extendable version: -Loading surface in extendable version with rear bevel of approx. 1,000 mm x 8° -5 pairs of lashing rings can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings can be folded outwards (LC 10,000 daN) -1 pair of lashing rings lying in the front of the cargo bed (LC 10,000 daN) Cut-outs in the outer frame of the cargo bed for attaching lashing straps. (LC 2,000 daN) -Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Ijdpfx Ash Etf Rja Hjia Removable two-part ramps: -A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking -Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable -Maximum load per pair: 40,000 kg Seat posts: -JOST fifth wheels (mechanical) with 2-speed gearbox for 24 t lifting load (50 t test load) Axles and tires: -BPW axles, two axles rigid two axles self-steering, air-suspended, with drum brake, with lifting/lowering function The self-steering axles with electro-magnetic reverse lock can be activated via reverse gear or manually -axle tool -235/75 R 17.5 tires Brake system: -brake system in accordance with EU regulations with EBS-E (4S3M) Steel construction: -steel construction made of high-strength fine-grained steels -Steel grades: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Coating: -First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in nova grey Electrical system: -Electrical system in accordance with EU regulations, 24 volt ASPÖCK-NORDIK lighting (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Accessories included: -2" kingpin -One galvanized steel bulkhead approx. 400 mm high -One spare wheel with holder in front of the bulkhead -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with holder on the bulkhead -Mounting in the rear area of the gooseneck for ALU docking ramps -Galvanized folding supports under the bevel of the cargo bed -One bracket for a rotating beacon -Cover plates to bridge the gap between ramps and cargo bed -White reflector tape in accordance with EU regulations on the sides, on the extension and red at the rear -Electric hydraulic unit -On the gooseneck and on the ramps on the left and right a holder for the warning signs including socket -Control valves for the ramps mounted on the right-hand side of the trailer -One mud flap at the rear of the trailer -Manual and description on USB stick -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) -4 pairs of WADER container pockets in the loading area for one 20ft, 2x 20ft or one 40ft container -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -Galvanized extensions, extendable by approx. 230 mm per side -Lift axle on the front axle with controls -Square climbing rails 20 x 20 mm -BEKAMAX central lubrication system -Four warning signs extendable by approx. 400 mm approx. 423 x 423 mm

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function Iisdpfxoh Hm Tho Aa Hoa -Hydraulic cylinder with stopcocks and locking pin for securing in raised position -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Ijdpel Sl Izefx Aa Hoia Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor

Condition: new, empty load weight: 10,600 kg, maximum load weight: 35,400 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,500 mm, loading space width: 2,540 mm, loading space height: 940 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Loading area: -Loading area in extendable design -Loading area with hardwood planks with rear bevel of approx. 500 mm x 8° -2 pairs of lashing rings (LC 5,000 daN) -1 pair of lashing rings (LC 10,000 daN) Iiodpfsl Ux Rwex Aa Hsa -6 pairs of lashing rings that can be folded outwards (LC 5,000 daN) -3 pairs of lashing rings that can be folded outwards (LC 10,000 daN) -Cutouts in the outer frame of the loading area for attaching tensioning straps Braking system: -Braking system in accordance with EU regulations with EBS-E (2S2M) Paintwork: -First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer -A high-quality 2-component (2K) top coat in a single color in Nova gray -Rear section metallized and in Painted RAL 9010 (pure white) -No metallic paint possible Seatposts: -JOST seatposts (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Steel construction: -Steel construction made of high-strength fine-grain steel -Steel grades: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) Electrical system: -Electrical system in accordance with EU regulations, LED lighting 24 volts -2x 7-pin & 15-pin sockets Axles and tires: -BPW axles, air-sprung, with disc brakes (377 mm), with lifting/lowering function -Hydro-mechanical forced steering -Axle tool -Twin tires 235/75 R 17.5 Accessories included: -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks with bracket -2" king pins -A galvanized steel front wall approx. 1600 mm high -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -Loading area with strong hardwood floor -Steering from the front and rear using a cable -Remote control operated via push buttons, with alignment control of the axles -With radio remote control for the steering -9 pairs of stake pockets for 100 x 50 mm stakes in the outer frame of the loading area. -Galvanized folding supports under the slope of the loading area -Movable mounting rail for aluminum docking ramps at the rear of the vehicle -European reflector signs (red-yellow) at the rear of the trailer -A mud flap at the rear of the trailer -A bracket for a rotating beacon at the rear of the trailer -A bracket for the warning signs including a socket on the gooseneck and on the rear panel on the left and right -A tool box INOX 1,500x390x810 under the loading area on the right in the direction of travel -Central lubrication system BEKAMAX (Pico) with normal grease NLHI-2 and removable protection around the pump -6 pairs of WADER container pockets in the loading area, for 1x 20ft container, 2 x 20ft container or 1 x 40ft container, an additional locking point is provided in the pull-out for a 45ft container -4 pairs Stake pocket strips, mounted transversely in the loading area, for 100 x 50 mm stakes -Lift axle on the front axle with control by TEBS -A dependency on the current axle load and the current loading status -Speed sticker 80 km/h at the rear and on both sides -Four warning signs extendable by approx. 400 mm, approx. 423 x 423 mm with an LED position light -A holder for a rotating beacon on the warning signs -Load pressure gauge for determining the axle loads including load diagram -HRM metallization (high resistance metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZIN

Condition: used, machine/vehicle number: L020390, first registration: 08/1992, tire size: 285/70 R19.5, axle configuration: 3 axles, color: other, suspension: hydraulics, total length: 13,600 mm, total width: 2,500 mm, total height: 1,750 mm, Year of construction: 1992, Chassis Chassis height: 60 cm Height of coupling pin / drawbar: 120 cm Structure Platform: ✓ Platform size: 580x250 cm Special Transport Length above axes: 400 cm Length of loading floor: 580 Length of swan neck: 300 cm Lowloader: ✓ Max width: 250 cm Tank Fuel: ✓ 3-axle lowbed trailer with steering rear axle, Hydraulic suspension, BPW axles, Drum brakes, Dual tyres, ABS, Tyres 285/70R19.5 // Load bed length min. 580 cm, Load bed height 60 cm, Load bed width 250 cm, Axle plateau length 400 cm, Axle plateau height 105 cm, Gooseneck length 300 cm, Gooseneck loading height 175 cm, Kingpin height 120 cm, Total shipment dimensions 1360x250x175 cm = More information = Axle configuration Tyre size: 285/70 R19.5 Make axles: Bpw Brakes: drum brakes Suspension: hydraulic suspension Axle 1: Double wheels; Tyre profile left outer: 80%; Tyre profile right outer: 80% Axle 2: Double wheels; Tyre profile left outer: 90%; Tyre profile right outer: 90% Axle 3: Double wheels; Steering; Tyre profile left outer: 90%; Tyre profile right outer: 60% Weights GVW: 56.000 kg Functional Make of bodywork: Nooteboom Height of cargo floor: 60 cm Identification Registration number: A166801 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Iisdpou H Ay Ejfx Aa Hsa Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: new, empty load weight: 130 kg, maximum load weight: 620 kg, overall weight: 750 kg, loading space length: 2,010 mm, loading space width: 1,080 mm, loading space height: 330 mm, tire size: 145/80r13, Small and maneuverable car trailer from trailer manufacturer STEMA. The open box trailer Basic is ideal for private transport and small loads. Garden waste, small furniture, everything you need for private use or for small businesses. The steel trailer comes as standard with a support wheel, four lashing eyes, high-quality locks, galvalum galvanized side walls and a V-drawbar. The entire equipment list and technical details can be found below. This model is also available in different versions, for example as a lid trailer or tarpaulin trailer. We also offer trailer accessories such as attachments, tarpaulin and frame, flat tarpaulin, drawbar box and rear supports. You can also find all of our cost-effective offers on our homepage. Delivery throughout Germany (except islands) possible! Feel free to ask us about the prices. Car Trailer Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Pick-up times: Monday - Friday – 9.30 a.m. Iisdpegtq Edofx Aa Hoa Pick-up is not possible on Saturdays!

Condition: used, machine/vehicle number: SKMGTS44Z8KT10806, axle configuration: 3 axles, first registration: 01/2008, total length: 14,100 mm, total width: 2,550 mm, total height: 2,800 mm, suspension: air, tire size: 235/75 R17.5, color: other, Year of construction: 2008, = Additional options and accessories = - Drum brakes = Remarks = Chassis Chassis height: 100 cm Diameter coupling pin / coupling plate: 2 inch Height of coupling pin / drawbar: 120 cm Drum brake: ✓ Structure Construction year: 2008 Special Transport 2-piece driving plates: ✓ Hydraulic ramps: ✓ Iiedpsygtikefx Aa Hea Length of loading floor: 945 cm Max width: 255 + 25 +25 cm Expandable: ✓ Extendable: × King semi-low bed trailer, Max gross weight 44000 kg, Load bed lenght 945 cm, Outriggers of 25 cm, Max load bed widht 305 cm, Load bed height +/- 90 cm, Year of construction 2008, Hydraulic ramps, Gigant axles, ABS, Drum brakes, Air suspension, Shipment dimensions 1410x255x280 cm = More information = Axle configuration Tyre size: 235/75 R17.5 Make axles: Gigant Brakes: drum brakes Suspension: air suspension Front axle: Double wheels; Tyre profile left inner: 35%; Tyre profile right outer: 40% Middle axle: Double wheels; Tyre profile left inner: 40%; Tyre profile right outer: 60% Rear axle: Double wheels; Tyre profile left inner: 45%; Tyre profile right outer: 60% Weights Empty weight: 10.550 kg Carrying capacity: 33.450 kg GVW: 44.000 kg Functional Make of bodywork: King Identification Registration number: C272975 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: as good as new (ex-display), empty load weight: 10,000 kg, maximum load weight: 30,000 kg, overall weight: 40,000 kg, axle configuration: 4x2, loading space length: 9,220 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R17,5, Year of construction: 2025, Equipment: ABS, center pivot plate, trailer coupling, HTD 40K-RM-BM_ Internal dimensions: approx. 9,220 mm x 2,540 mm Overall dimensions: approx. 11,300 mm x 2,540 mm x 3,850 mm Perm. total weight: 24,000 kg Payload: approx. 14,000 kg Tyres: 235/75R17.5 inches Loading height: approx. 900 mm Drawbar length: approx. 1,500 mm Coupling height: approx. 820–1,000 mm Ramp angle: approx. 10° Ramp length: approx. 3,150 mm Ramp width: approx. 750 mm Perm. total weight special equipment: 40,000 kg Payload special equipment: approx. 30,000 kg Low-bed length: approx. 6,610 mm Overall dimensions (LxWxH): 11,200 Technical total weight: approx. 44,000 kg Technical axle load: approx. 11,000 kg 6 pairs of lashing points, 3,000 kg each Lashing points in the low-bed outer frame 4 pairs of lashing points, 3,000 kg each Lashing/pocket sleeves 3 t in the high-bed outer frame 1 pair of lashing points, 3,000 kg each Lashing/pocket sleeves 3 t in the low-bed outer frame Suspension: Air suspension unit including lifting and lowering acting on the rear axle unit Brake system: Brake system according to EC directives with EBS 4S/3M in multivoltage version (12–24V), spring-loaded parking brake including two external test ports for brake/modulator and bellows pressure Electrics: LED lighting with indicator function for side marker lights, multivoltage (12–24V) Turntable: Heavy-duty welded construction with low-maintenance ball-bearing turntable Towing equipment: Cranked drawbar with 50 mm towing eye, low-maintenance silent bushings including height adjustment for drawbar Chassis: Heavy-duty welded construction made of high-tensile fine-grained steel, through-running cross-members for maximum stability Wheel recesses front (approx. 2,500 mm upper length, 410 mm depth) and rear (approx. 1,470 mm upper length, 370 mm depth); without wheel recess covers Excavator trough (length 1,650 mm, width 750 mm, depth 190 mm) Wheel cutouts above the rear wheels with 2,010 mm wheelbase, front corners chamfered, rear with climbing strips on ramp incline for maximum safety during loading and unloading 4 pairs of stake pockets (90x50 mm) on high-bed outer frame 1 pair of stake pockets (90x50 mm) on low-bed outer frame Floor: 50 mm softwood flooring (painted/impregnated) Ramps: One-piece hot-dip galvanized loading ramps (3,150 mm x 750 mm) with 50 mm softwood covering (painted/impregnated), laterally adjustable, direct-acting upright spring-assist for easiest handling Finish: Chassis frame hot-dip galvanized in immersion bath Support: 2 foldable supports at the rear left and right of the vehicle Equipment: Iijdeiciutopfx Aa Hea Folding side underrun protection Front semi-circular plastic mudguards; rear straight steel mudguards with anti-spray 2 wheel chocks with holders; contour markings according to ECE regulation R48 Front wheel recess cover: With 3 pairs of stake pockets, without covering (cover retractable under the longitudinal beams) 975.00888 Hardwood covering for front wheel recess cover Rear wheel recess cover: With 1 pair of stake pockets, without covering (cover retractable under the longitudinal beams) 975.00897 Hardwood covering for rear wheel recess cover 3 pairs of bolted lashing eyes, 6 t 3 m equipment package without incline B=11,200 Folding outriggers with softwood boards 970.04199-36 LED warning package HTD, cranked Aspöck warning boards 4 times, electrics and revolving beacon 1 pair of storage compartments for 3 m wood planks package (2 pieces mounted lengthwise under the loading area in front of the wheel recess) Rubber coat

Condition: used, machine/vehicle number: XMR0SD00090002037, axle configuration: > 3 axles, first registration: 05/2010, total length: 13,300 mm, total width: 2,550 mm, total height: 3,200 mm, suspension: air, tire size: 245/70 R17.5, color: other, Year of construction: 2010, = Additional options and accessories = - Drum brakes = Remarks = Chassis Diameter coupling pin / coupling plate: 2 inch Height of coupling pin / drawbar: 120 cm Drum brake: ✓ Structure Construction year: 2010 Special Transport 2-piece driving plates: ✓ Hydraulic ramps: ✓ Length above axes: 890 cm Length of loading floor: 890 cm Length of swan neck: 375 cm Max width: 305 cm (25 cm +25 cm) Expandable: ✓ Extendable: ✓ NON-EU VEHICLE, REQUIRES CUSTOMS CLEARANCE // Extendable semi lowbed trailer, Year of construction 2010, Type OSDS-58-04V, Max technical gross weight 58000 kg, Load bed lenght 890 cm, Load bed width 250 cm, Extendable, Load bed height 95 cm, Gooseneck lenght 375 cm, Hydraulic ramps, 2 passive steering axles, Tire size 245/70R17.5, SAF axles, Drum brakes, ABS, Air suspension, Shipment dimensions 1330x255x320 cm Iijdpfexyff Aox Aa Hea = More information = Technical information Chassis: Nooteboom OSDS-58-04V GVW: 58.000 kg Axle configuration Tyre size: 245/70 R17.5 Make axles: Saf Brakes: drum brakes Suspension: air suspension Front axle: Double wheels; Tyre profile left outer: 45%; Tyre profile right outer: 35% Middle axle 1: Double wheels; Tyre profile left outer: 70%; Tyre profile right outer: 75% Middle axle 2: Double wheels; Steering; Tyre profile left outer: 80%; Tyre profile right outer: 45% Rear axle: Double wheels; Steering; Tyre profile left inner: 50%; Tyre profile right outer: 50% Functional Make of bodywork: Nooteboom OSDS-58-04V Identification Registration number: C307432 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, machine/vehicle number: W09TS300870M49625, empty load weight: 12,400 kg, maximum load weight: 32,600 kg, overall weight: 450,000 kg, axle configuration: 3 axles, total length: 14,340 mm, total width: 2,550 mm, total height: 3,780 mm, tire size: 235/75R17.5, color: blue, Year of construction: 2008, The Meusburger MTS 3 low loader is the perfect solution for anyone seeking a reliable, robust, and versatile truck trailer. Its high-quality workmanship and sturdy construction ensure a long service life and a high level of safety in every application. Thanks to its generously sized platform, the MTS 3 offers ample space for a wide variety of loads, whether in the construction industry or for heavy transport operations. The superior build quality and solid design make it a worthwhile investment for any business. If you are interested, we are happy to provide further information or a consultation upon request! Features / Basic Data: Axles: 3 Length: 14.34 m Width: 2,550 mm Height: 3,780 mm Unladen weight: 12,400 kg Kingpin load: 18,000 kg Gross technical weight: 45,000 kg Maximum axle load: 10,000 kg Tyres: 235/75R17.5 Iiodpfxoygxb So Aa Hoa Equipment: - Two-piece hydraulic rear ramp - Axle spacing (1/2): 1.41 m - Axle spacing (2/3): 1.31 m - 1st axle: liftable - 2nd and 3rd axles: hydraulically steered - NATO socket

Condition: used, machine/vehicle number: W09H20338BHZ07032, empty load weight: 12,700 kg, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 01/2012, total length: 13,950 mm, total width: 2,550 mm, total height: 2,800 mm, tire size: 235/75R17.5, color: blue, Year of construction: 2012, The Zanner STL 38 low loader is a robust and versatile semi-trailer, ideal for transporting heavy and oversized loads. Its stable construction and adaptable operational options provide an efficient solution for your logistics and transport requirements. Thanks to its low loading height and access ramps, loading and unloading are especially easy, saving both time and effort. Whether in construction or heavy haulage, the Zanner STL 38 impresses with its performance and durability, making it a worthwhile investment. If interested, we are happy to provide further information or personal consultation! Features/Technical Data: - Length: 13.95 m - 14.37 m - Width: 2.55 m - Height: 2.80 m - 3.80 m - Loading height: 920 mm - Gooseneck: 1,350 mm - Unladen weight: 12,700 kg - Support load: 11,000 kg - Permissible gross weight: 38,000 kg - Maximum axle load: 10,000 kg - Tyres: 235/75R17.5 - Axles: 3 - Axle distance 1 to 2: 1.41 m - Axle distance 2 to 3: 1.31 m - Lift axle: 1 - Steering axles: 2 Equipment: Iiodpfxsyguxmo Aa Hea - Two-piece, hydraulically adjustable ramp - Hydraulic forced steering - Vertically pivotable centre section - Hydraulic cable winch with remote control - Hydraulic steering - Hydraulic support legs - NATO plug/socket

Condition: new, functionality: fully functional, color: red, DE ANGELIS 3S425 Semi-trailer NEW, READY FOR FIRST REGISTRATION Maximum gross weight: 42,500 kg Tyres: 13 units, size 245/70R17.5'' Vehicle equipped with: - 4.00 x 0.85 m hydraulic loading ramps, wood-covered (non-shifting) - Electro-hydraulic control unit - 1 stainless steel toolbox 600x600x300 mm (ditch side) - Gigant axles - Air suspension - 3rd steered axle - Lashing rings kit - 200 mm high aluminium sideboards on gooseneck FINANCING OR CUSTOM LEASING AVAILABLE ON SITE. WITH TERMS FROM 24, UP TO 96 MONTHLY INSTALLMENTS, ALSO WITH ZERO DOWN PAYMENT. OTHER LOCATIONS OF OUR GROUP: DOMENICO TRUCK SRL - NAPLES BRANCH DOMENICO ESPOSITO S.P.A. - EBOLI (SA) BRANCH – OFFICIAL DEALER MERCEDES-BENZ, FUSO, FOTON TRUCK, PIAGGIO COMMERCIAL AND MAXUS CONTACTS: 0823 1686306 335 6713062 Iijdpfsylayajx Aa Hja OPENING HOURS: MONDAY-FRIDAY 8:30–19:00 | SATURDAY 8:30–14:00 WE OFFER A WIDE RANGE OF USED MULTIMAKE COMMERCIAL/INDUSTRIAL VEHICLES: Fiat – Hyundai – Daf – Mercedes Benz – Renault – Peugeot – Iveco – Mitsubishi – Scania – S-Way – S500-V8-650-580-730-S500-S 500-S500 – Stralis – Man – Nissan V8 – Intarder – 770s – Limited Edition – 660 S Semi-trailer – Refrigerated Tipper Semi-trailer – Lamberet – Schmitz – Isuzu – Fixed Platform – Crane – Tipper – 4 axles – Rear 4 axles – Tway – T-Way-540-460 hp – Xway – X-Way – Three-way Tipper – V8 – Scania – Frost Edition – Curtain-sider – Box body – Tail-lift – Refrigerated Cell – Insulated with Fridge – Van Domenico Truck SRL declines any responsibility for possible discrepancies in technical specification, options, and features that may in some cases differ from what is specified in the description. We recommend verifying the characteristics of the specific vehicle.

Condition: new, maximum load weight: 2,600 kg, overall weight: 3,500 kg, Year of construction: 2025, Buy online at trailer-shop.de At ANHÄNGERWIRTZ, many models are available online Convenient 24/7 online shopping Pick up yourself or have it delivered 😊 Iiodpfxex E T T Is Aa Hea The online pick-up marketplace for your new trailer offers premium brand vehicles! Over 850 new trailers in stock More than 130 used trailers constantly available. Non-binding example: Many versions available immediately Martz machine transport trailer Builder XL pro+ rk Loading area: 400x181x30 cm, GVWR: 3500 kg Tridem axle, V-drawbar, galvanized steel drop sides, anti-slip phenolic plywood floor on steel frame, 6 tie-down rings (each 250 daN) on the loading bed, shovel holder, ramp with support and air vents, automatic jockey wheel, 13-pin plug connection... Invoice with itemized VAT, warranty - trailer dealer for over 34 years Order by phone during our business hours, Monday to Friday, or shop online 24/7 at trailer-shop.de Copyright - Trademark protection 12.25 Article No.: BUILDER3500MA4003PRO+AK

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the length of the loading area, length approx. 3,750 mm, with a bevel at the rear of approx. 850 mm x 10° -Can be raised and lowered hydraulically, stroke +- 250 mm including hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For tractor units: 6 x 4 and 8 x 4 Loading area: -Loading area in extendable design, length approx. 11,000 mm with a bevel at the rear of approx. 500 mm x 10°. -A recess in the loading area and in the bevel to accommodate the excavator bucket handle approx. 4,240 x 900 x 440 mm -Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically foldable ramp tips. -Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards -25 mm "Super Grip" rubber floor and approx. 5 mm sheet metal floor as additional reinforcement on the slope of the loading area -20x30 mm square climbing rails, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steered -The steering behavior of the first two axles can be optimally adjusted to the length of the loading area both mechanically and hydraulically. -Hose rupture valve on the axle compensation cylinder with automatic RESET function. -Hydraulic cylinder with shut-off valves and pins for securing in the raised position. -245/70 R 17.5 3PMSF Accessories included: -Steel bulkhead, pluggable, approx. 400 mm high -Connection strip for supply lines to the tractor unit, mounted at the height of the outer frame profile -1 spare wheel Isdpfx Aok Af Svja Hoia -Outer support of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screwable lashing rings included -Checker plate covering above the gooseneck -On the gooseneck 1 pair of pluggable aluminum side walls on the side, approx. 400 mm high, anodized -On the gooseneck a pluggable aluminum rear wall, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide -4 Brake shoes -4 axle load gauges -Mechanical downpipe supports at the front -1 one-piece INOX tool box, approx. 2,480 x 340 x 390 mm -Mechanical downpipe supports at the front -Continuous sheet metal covering on the loading area with a painted layer of sand to prevent slipping -1 intermediate table, approx. 500 mm wide, for the pull-out, with long holes for hanging and movable bridging elements -Painted sand coating on the support surfaces of the intermediate table -Mechanical locking for locking the intermediate table to the pull-out -8 pairs of stake pockets in the outer frame -Extensions (galvanized) extendable by approx. 230 mm per side -1 pair of hydraulic. Rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electro-hydraulic unit -Widening planks, loose, in reinforced steel U-frame -Radio and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: new, empty load weight: 15,900 kg, maximum load weight: 63,500 kg, overall weight: 68,000 kg, axle configuration: > 3 axles, loading space length: 12,700 mm, loading space width: 2,740 mm, loading space height: 860 mm, suspension: air, tire size: 235/75/r17,5, color: grey, operation weight: 52,100 kg, Equipment: ABS, Gooseneck: Gooseneck in SNT design to optimize the loading area length, length approx. 3,300 mm, rear with bevel approx. 1,000 mm x 10° Technical fifth-wheel load: 23,000 kg For SZM: 6x2, 6x4 and 8x4 Cargo bed: Loading area in extendable design, length approx. 9,400 mm with bevel at the rear approx. 500 mm x 10° A recess in the loading area and protruding into the chamfer to accommodate the excavator dipper stick approx. 3,850 x 950 x 210/290 mm Pneumatic locking with conical locking bolt and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adjust to the respective loading area length Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool 235/75 R 17.5 3PMSF dual tires Load index 143/141J (144/144F) Two-piece steel ramps: A pair of two-piece steel ramps with a length of approx. 4,350 mm and a width of approx. 900 mm Hardwood decking Hydraulically hinged ramp tips Ramps can be moved individually hydraulically by approx. 235 mm outwards and approx. 215 mm inwards Brake system: WABCO EBS-E brake system in accordance with EU regulations Sockets and lighting: 24-volt lighting system Full metallization: Complete HRM metallization with ZINACOR 850 to ensure the best corrosion protection Surface treatment: Complete steel structure automatically blasted after welding with wheel blast cleaning Second blasting with corundum for optimum adhesion of the coating system Final coating with 2 layers of 2-component paint in a single color in nova grey, followed by sealing of the cavities with special wax Rims in silver gray Steel construction: Steel construction made from high-strength fine-grain steels Steel grades: S355J2+N/S355MC S690QL/S700MC Ijdpsmfqi Isfx Aa Hoia Accessories: Steel end wall, pluggable, approx. 400 mm high Connection strip for supply lines to the SZM Spiral cable for supplying the electro-hydraulic unit and/or the electric cable winch between the trailer and SZM with plug Electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches Outer beam of the gooseneck with fastening holes for screwable lashing rings The first hole approx. 200 mm from the front, then approx. every 400 mm One fastening hole in the rear upper area of the gooseneck outer beam for a screwable lashing ring Approx. 40 mm thick hardwood covering over the gooseneck, checker plate covering over the kingpin Guide plate from the gooseneck for the fifth wheel plate, approx. 500 mm wide Continuous, approx. 50 mm thick hardwood planking on the loading area, interrupted between the axles Locking of the cargo bed with conically welded locking profiles every 250 mm, including pretensioning plate Slotted holes for attachable and movable bridging elements: on the fixed part behind the gooseneck on the front of the cargo bed 1 movable intermediate table, for the large cross-section extension tube Control valves for the hydraulic ramps on the right-hand side of the vehicle Central lubrication system with 1 pump, with standard grease according to NLGI-2 Radio remote control for operating the steering, in addition to the cable remote control, with 2 indicator lights on the receiver as single-track control

Condition: used, Nooteboom Lowbed. Floor dimensions: Length: 6650 mm Width: 2750 mm Floor thickness: 230 mm Extendable. Widened twice by 25 cm each. ID No: 54. The General Terms and Conditions of Heinhuis apply to all advertisements, offers, and quotations by Heinhuis, all contracts concluded by Heinhuis, as well as the negotiations preceding them. By responding in any form, you accept the applicability of the General Terms and Conditions of Heinhuis and declare that you have taken note of these terms and conditions. Our prices are net export prices. = More information = Extendable construction: Yes Reference number: 54 = Company information = Iiedpfex T Ag Hjx Aa Hsa For more information: WhatsApp:

Condition: excellent (used), functionality: fully functional, empty load weight: 9,800 kg, maximum load weight: 30,200 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 07/2022, next inspection (TÜV): 02/2026, loading space length: 13,800 mm, loading space width: 2,550 mm, loading space height: 870 mm, total length: 13,700 mm, suspension: air, tire size: 245.70 R 17.5, color: red, trailer brake: trailer braked, Year of construction: 2022, Equipment: ABS, tail-lift, Used Komodo low loader semi-trailer with ramps, year 2022, 3 axles with lowered gooseneck platform, 1st axle liftable and 3rd steering, EBS, 10m low deck with ground clearance 87cm, double grating ramps 4.0m long, width adjustable, side extensions, RUD side and floor hooks 8t, removable side boards on neck, air suspension, deck in wood and steel, side toolbox, large neck box, dual speed landing legs, excellent condition, inspected until 28.02.2026 – DEALER INTERDRIVE SRL-PARMA Ijdpfx Aaeyfwdis Hjia