Low loader

Nooteboom 3-axle lowbed trailer OSDAZ-56

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: Dcodpfx Aaeh Hm Thjxog -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)

Condition: excellent (used), mileage: 268,805 km, power: 331 kW (450.03 HP), first registration: 09/2017, fuel type: diesel, tire condition: 50 %, axle configuration: 8x4, wheelbase: 7,750 mm, fuel: diesel, brakes: retarder, color: silver, driver cabin: other, emission class: euro6, number of seats: 2, total length: 10,450 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2017, Equipment: ABS, air conditioning, crane, electric window regulation, retarder, traction control, = Additional options and accessories = - Additional steering axle - Air conditioning (automatic) - Power take-off (PTO) - Sun visor = Remarks = Crane Hours: 5860 uur Number of hydraulic extensions: 8+6 Number of manual extensions: 1 Number of support legs: 4 Number of extra functions: 2 Remote control: ✓ Load Hook: ✓ Rotator: × Very nice Scania G450 equipped with a Palfinger 92tm crane! In addition to the options already mentioned, it has: -Retarder -Automatic -Air conditioning -8x4 triple -Palfinger PK92002-SH-G -8x hydraulically extendable -PJ125 E Flyjib -6x Hydraulically extendable -1x Hand part etc etc This truck is ready for its next job! = More information = General information Cab: half sleeper Registration number: BD-462-F Technical information Number of cylinders: 6 Engine capacity: 12.742 cc Axle configuration Tyre profile: 50% Max. front axle load: 9000 kg Rear axle 1: Max. axle load: 9500 kg Rear axle 2: Max. axle load: 9500 kg Rear axle 3: Lift axle; Max. axle load: 8000 kg Weights Empty weight: 26.840 kg Carrying capacity: 9.260 kg GVW: 36.000 kg Max. towing weight: 50.000 kg Functional Crane: Palfinger PK92002-SH-G Plus Jib 125e, year of manufacture 2016 Maintenance APK (MOT): tested until 03/2027 Dedpfeyt Snfex Aaxscg Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: used, mileage: 53,857 km, power: 270 kW (367.10 HP), first registration: 06/2003, fuel type: diesel, overall weight: 36,000 kg, axle configuration: 3 axles, color: yellow, gearing type: automatic, emission class: euro3, total width: 2,680 mm, total height: 3,750 mm, Equipment: parking heater, Liebherr UTM 735 - Crane: LTM 1055/1 - Year of manufacture: 2003 - 22,439 operating hours (carrier chassis) - 18,883 operating hours (crane superstructure) - 53,857 km mileage - 4 x hydraulic boom extension - 16 m jib - Hydraulic steering - 12 t additional counterweights - LED beacon lights - Technical inspection due: - Safety inspection due: 01.2026 Dcsdpfx Ajw H Hwvjaxjg - Tyres: 445/95 R 25 Subject to errors and prior sale. Internal vehicle number: 11218 WhatsApp support available! For questions about the vehicle or for further information, feel free to contact us conveniently via WhatsApp.

Condition: used, mileage: 129,754 km, power: 368 kW (500.34 HP), first registration: 07/2023, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2028, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2023, Equipment: ABS, air conditioning, crane, Internal vehicle number: VTC30026 German vehicle Available immediately at our yard in Kaufungen - Kassel, Germany More INFO from: * Luis Lucena (German, English, Spanish, French) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Platform dimensions [mm]: 6400 x 2550 Palfinger PK53002 SH 1159 operating hours 4m – 10,800 kg 6m – 7,600 kg 8m – 5,700 kg 10m – 4,450 kg 12m – 3,650 kg 14.5m – 3,050 kg ELBO PCS trailer (included in vehicle price) EUR 17,900 Ref. No.: VTC30018 Year of manufacture: 2023 Current weight: 4,650 kg Permissible payload: 13,350 kg Overall dimensions: 8,250 x 2,550 mm Loading area dimensions: 6,400 x 2,550 mm Tyres: 235/75 R17.5 Suspension: Air suspension Brakes: Drum brakes Hydraulic ramps Errors excepted. We will gladly accept your used vehicle in part exchange. Financing is available directly through our company. GOLEC NUTZFAHRZEUGE GMBH Languages spoken: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian. Dcedpfx Aaeyrv Tcsxjg ----.

Condition: like new (used), functionality: fully functional, mileage: 5 km, power: 14.7 kW (19.99 HP), gearing type: automatic, fuel type: diesel, color: blue, overall weight: 1,520 kg, operation weight: 1,520 kg, number of seats: 1, shovel volume: 0.025 m³, digging bucket width: 380 mm, Year of construction: 2021, operating hours: 7 h, Equipment: additional headlights, all wheel drive, cabin, hydraulics, rubber tracks, standard shovel, Gekko Network KG in Gersthofen – Your supplier for vehicles of all kinds. You can reach us by phone at 0821/453 467 70, via email, or in person at Wernher-von-Braun-Str. 2, 86368 Gersthofen. New Kingway CX15 B Mini Excavator with Perkins engine, joystick controls on the seat, rain and sun canopy, side boom operation, including 3 buckets! Manufacturer: Perkins; Model: CX15 CP with cab and articulated boom including Perkins engine; Year of manufacture: 2021; Weight: 1,520 kg; Engine power: 14.7 kW; Operating hours: 7 h Dcjdsklwvcspfx Aaxeg Technical specifications: Model: CX 15B, Power (HP): 19 HP, Fuel: Diesel, Track width (mm): 950 mm, Digging depth (mm): 1,950 mm, Total machine weight (kg): 1,580 kg, Hydraulic connections for: breaker, auger, ripper tooth, log grapple, rake. Includes: 3 buckets (300/500/800 mm). Basic information Bucket capacity: 0.025 m³ Bucket width: 380 mm Boom length: 1,560 mm Stick length: 793 mm Hydraulic oil tank capacity: 13 l Hydraulic system Hydraulic pump model: DHP0010 Max. oil pressure: 17 MPa Hydraulic pump flow rate: 28.5 l/min Performance Rotation speed: 10 rpm Gradeability: 25% Bucket breakout force: 9.6 kN Boom force: 8.5 kN Engine Type: PERKINS Rated power: 14.7 kW at 2,200 rpm Max. torque: 51.8 Nm Number of cylinders: 3 Cooling: Air Working range Max. digging radius: 3,225 mm Max. digging depth: 1,650 mm Max. digging height: 2,740 mm Max. dumping height: 1,970 mm Max. raised dozer blade height: 170 mm Max. lowered dozer blade depth: 220 mm Boom swing angle: 50° left / 70° right Dimensions Track length: 1,290 mm Ground clearance: 405 mm Counterweight swing radius: 850 mm Track width: 180 mm Track height: 320 mm Height (without/with canopy): 1,570/2,200 mm Included tools / accessories 3 buckets Workshop toolkit Other information Joystick controls Ideal for construction, electrical, plumbing, repair, and service companies in related fields Minimal space requirement due to additional swing arm Manufactured based on and within European engineering standards, suitable for many conditions. Please note that some vehicles from our portfolio may be stored externally and not immediately available for on-site inspection. Please always contact us in advance at 0821/453 467 70. Our complete range is available on request. Price excluding VAT – VAT deductible

Condition: used, machine/vehicle number: XLRAC85MC0G012278, mileage: 309,000 km, first registration: 01/2013, tire size: 315/80 R22.5, axle configuration: 8x2, color: other, suspension: other, total length: 9,900 mm, total width: 2,500 mm, total height: 4,100 mm, loading space length: 5,700 mm, loading space width: 2,500 mm, Year of construction: 2013, Equipment: crane, = Additional options and accessories = - Sper = Remarks = Cabin Right hand drive: ✓ Chassis Chassis height: 100 cm Wheelbase: 205 cm (1-2) 300 cm (2-3) 140 cm (3-4) Fuel tank capacity: 400 L Brand trailer coupling: VBG Structure Platform: ✓ Tank Fuel: ✓ Crane Number of hydraulic extensions: 6 Number of support legs: 4 Remote control: ✓ Load Hook: ✓ Maximum crane load capacity : 18000 kg at 3.0 meters, 16700 kg at 3.9 meters, 14.600 kg at 4.7 meters, 10.800 kg at 6.2 meters, 8100 kg at 8.0 meters, 6400 kg at 9.9 meters, 5200 k Dcsdpfou H Irgsx Aaxeg Maximum crane reach: 16.30 m NON DUTY FREE VEHICLE, REQUIRES CUSTOMS CLEARANCE // RIGHT-HAND DRIVE // Hiab XS855 EP6 Hipro loading crane with hook, Max horizontal reach 16.3 meters, Max load capacities 18000 kg at 3.0 meters, 16700 kg at 3.9 meters, 14.600 kg at 4.7 meters, 10.800 kg at 6.2 meters, 8100 kg at 8.0 meters, 6400 kg at 9.9 meters, 5200 kg at 11.9 meters, 4350 kg at 14.1 meters, 3750 kg at 16.3 meters, 6 Hydraulic extensions, 4 support legs, radio control, Year of construction 2013 // Truck 8x2, RHD, Automatic gearbox, Diff. lock, Adblue, Euro 5, Steel front suspension, Air rear suspension, 3rd axle lift and steering axle, Day cabin, Digital tachograph, Shipment dimensions 990x250x410 cm = More information = Axle configuration Tyre size: 315/80 R22.5 Axle 1: Steering; Tyre profile left: 45%; Tyre profile right: 55%; Suspension: leaf suspension Axle 2: Steering; Tyre profile left: 50%; Tyre profile right: 55%; Suspension: leaf suspension Axle 3: Double wheels; Tyre profile left outer: 60%; Tyre profile right outer: 65%; Suspension: air suspension Axle 4: Lift axle; Steering; Tyre profile left: 65%; Tyre profile right: 50%; Suspension: air suspension Weights Empty weight: 13.500 kg Carrying capacity: 20.500 kg GVW: 34.000 kg Functional Crane: Hiab XS855 EP6 Hipro, year of manufacture 2013, behind the cab Make of bodywork: Hiab Identification Registration number: PF63JUY = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: used, machine/vehicle number: XMREUR00020000597, axle configuration: 3 axles, first registration: 01/2002, total length: 16,200 mm, total width: 2,750 mm, total height: 2,300 mm, suspension: hydraulics, tire size: 285/70 R19.5, color: other, Year of construction: 2002, Chassis Diameter coupling pin / coupling plate: 2 inch Structure Djdpou H Iywjfx Aaxscg Dish height: 120 cm Special Transport Detachable swan neck: ✓ Length above axes: 410 cm Length of loading floor: 710 cm Length of swan neck: 325 cm Lowloader: ✓ Max width: 335 cm (275 cm) Expandable: ✓ Tank Fuel: ✓ NON DUTY FREE VEHICLE, REQUIRES CUSTOMS CLEARANCE // 3-axle lowbed trailer with removable gooseneck, Max. gross weight 60000 kg, 3 forced steering axles, Hydraulic suspension, Dual tyres 285/70R19.5, SAF axles, Drum brakes, ABS, Remote control // DIMENSIONS // Low bed length 710 cm, low bed width 275 cm (extendable to 335 cm with outriggers), Lenght over axles 410 cm, Gooseneck lenght 325 cm, Gooseneck height 2 cm, Kingpin diameter 2 inches, Shipment dimensions 1620x275x2 cm = More information = Axle configuration Tyre size: 285/70 R19.5 Make axles: Saf Brakes: drum brakes Suspension: hydraulic suspension Axle 1: Double wheels; Steering; Tyre profile left outer: 85%; Tyre profile right outer: 80% Axle 2: Double wheels; Steering; Tyre profile left outer: 75%; Tyre profile right outer: 60% Axle 3: Double wheels; Steering; Tyre profile left outer: 40%; Tyre profile right outer: 60% Weights Empty weight: 12.850 kg Carrying capacity: 47.150 kg GVW: 60.000 kg Functional Make of bodywork: Nooteboom Height of cargo floor: 65 cm Identification Registration number: K7460107 = Dealer information = For more information on this unit please call: or e-mail: . A full stock overview can be found at: . Please do not forget to subscribe to our newsletter for weekly updates on our stock.

Condition: excellent (used), first registration: 09/2015, loading space length: 20,180 mm, loading space width: 3,000 mm, color: other, Year of construction: 2015, Damages: none YAFTL2007F0017329 = More information = Empty weight: 13.600 kg Carrying capacity: 28.400 kg GVW: 42.000 kg Technical condition: very good Visual appearance: very good Price: On request Registration number: DW205AH = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. Dsdpoymrb Sefx Aaxocg No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 09/2007, loading space length: 15,350 mm, loading space width: 2,550 mm, loading space height: 350 mm, total width: 2,550 mm, suspension: air, Year of construction: 2007, Equipment: ABS, = Additional options and equipment = - Air suspension - Central lubrication = Further information = Dsdpfx Asynil Doaxecg Axle configuration Suspension: Air suspension Rear axle 1: Dual tires; Max. axle load: 9,000 kg; Steering Rear axle 2: Dual tires; Max. axle load: 9,000 kg; Steering Weights Unladen weight: 19,240 kg Payload: 18,760 kg Gross vehicle weight: 38,000 kg Functional Extendable body: Yes Condition Technical condition: very good Optical condition: very good Financial information Price: On request Further information Contact David F Middelman for more information.

Condition: new, Year of construction: 2025, * Now available: Cangini Forestry Mulcher – Top Equipment We are pleased to offer you the Cangini Forestry Mulcher with excellent special features. * Condition: Brand-new machine * Availability: Immediately from stock Dodpfx Aoxqvr Ujaxscg ----Why choose Zirndorfer-Maschinenpark?---- * Official authorized dealer for Bobcat & Montabert * Family business with over 45 years of experience * In-house expert workshop ensuring quality assurance * Wide range of new and used machines Financing, leasing, or hire purchase? No problem – through our partner banks we will find the right solution for you. Want to trade in your used machine? We are happy to accept your machine as a trade-in on fair terms. Attachments and accessories? We also offer additional attachments and suitable accessories on request. Export to EU or non-EU countries? We handle the process for you. ----Special equipment of the Cangini Forestry Mulcher---- * Electric flap ----Standard equipment---- * Double-acting auxiliary hydraulics * CE certification ----Rely on three generations of experience---- Zirndorfer-Maschinenpark e.K. – your partner for construction equipment. Contact us now to secure your customised offer. ----Legal Notice---- The information provided online is non-binding and serves as a description only. It does not constitute guaranteed features. The seller is not liable for errors, input mistakes, or data transmission errors. Subject to change.