Low loader semitrailer

SCHEUERLE EuroCompact FL02 2fach Tele 17 m im Bett

Condition: new, empty load weight: 6,350 kg, maximum load weight: 38,650 kg, overall weight: 45,000 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Loading platform: - 2 pairs of lashing rings that can be folded outwards (LC 5,000 daN) - 24 pairs of cutouts in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Fifth wheel: - JOST fifth wheel (mechanical) with a 2-speed gearbox for a 24-tonne lifting capacity (50-tonne test load) Axles and tires: - BPW axles, air-sprung, with disc brakes (430 mm), with raising/lowering function - Tires: 385/65 R 22.5 Braking system: - WABCO braking system in accordance with EU regulations, with EBS-E (2S2M) Paintwork: - First-class and durable corrosion protection of the standard bead-blasted welded frame is guaranteed by a 2-component (2K) zinc dust primer - High-quality 2-component (2K) topcoat, single color in MB 7350 Novagrau - Rear part metallized and painted in RAL 9010 (Pure White) - Metallic paint not possible Steel structure: - Steel structure made of high-strength fine-grained steels - Steel grades: - S355J2+N/S355MC (yield strength 355 MPa) - S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations - Lighting: 24 volts - ASPÖCK-NORDIK (ASS3) - ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets - Connection according to ISO. - 24N ISO-1185 - 24S ISO-3731 Prsdpfx Aeiu Etkehkoc - 15-pin ISO-12098 Included accessories: - Yellow-red air couplings on the galvanized front connection bar - 4 wheel chocks with bracket - 2" king pin - Galvanized steel front panel, approximately 1,600 mm high. EN12642-XL - White reflector tape in accordance with EU regulations on the sides of the trailer and red on the rear - European reflector signs (red-yellow) at the rear of the trailer - Loading platform with approximately 30 mm thick hardwood floor, edged with omega profiles - 10 pairs of socket pockets for 100 x 50 mm securing bars in the outer frame of the loading platform - 3 pairs of socket pocket strips, mounted transversely in the loading platform, for 100 x 50 mm securing bars - Storage for 1,000 mm securing bars, at the rear in the central beam - 1 spare wheel holder under the loading platform on the right side in the direction of travel - One mud flap at the rear of the trailer - Manual and description on a USB stick - One bracket for a rotating beacon at the rear of the trailer - One bracket for warning signs including socket on the gooseneck and on the rear panel, left and right - 6 pairs of WADER container pockets in the loading platform, for 1x 20ft container, 2x 20ft containers, or 1x 40ft container. Flush with the rear - Speed stickers 80 km/h on the rear and on both sides - Four warning signs, each extendable by approximately 400 mm, approximately 423 x 423 mm, with an LED position light - Load gauge for determining axle loads, including a load diagram - HRM metallization (High Resistance Metallization) of the outer frame - Complete steel structure bead-blasted, followed by the defined visible surfaces hot-coated with metallization using ZINACOR 850 (Zinc 85% - Aluminum 15%)

Condition: used, overall weight: 120,000 kg, axle configuration: > 3 axles, first registration: 07/1999, Goldhofer STHP-ET Gooseneck Main Features - Turntable-mounted fifth wheel plate, 3.5" kingpin, and adjustable steering wedge - Built-in hydromechanical double steering for attachment of pendle axles (2-circuit steering, 4 hydraulic cylinders) - Hydraulic lifting and lowering function, including support cylinders - Hydraulic differential lock - Designed loading area (approx. 3,700 x 2,440 mm) with chequer plate cover - Engineered for a technical fifth-wheel load up to 30 t - Steering radius of 2,800 mm for use with a 4-axle tractor unit - Coupling heights loaded: 1,350 mm - Aluminium side walls (400 mm high, on all 4 sides) Goldhofer Heavy-Duty Chassis Module Type THP/ET 3 - Load bed length 4,200 mm x 2,750 mm - Load height 1,250 mm - Longitudinal and lateral combinable chassis module - Box-type central frame with integrated air and hydraulic oil tanks - Optimized bolt-lug coupling front and rear for longitudinal combinations - Two single-tired pendle axle units with a total of 4 wheels per axle line - Axle units mounted to the vehicle frame via turret bearings - Hydraulic axle compensation +/- mm, hydropneumatic gas spring suspension, and hose rupture safety valves on all axle units - Integrated hydromechanical 2-circuit all-wheel forced steering in the chassis with maximum steering angle of the axle units at 60° - 2-line all-wheel air brake and spring-actuated parking brake - Hydraulic locking pins - Unladen weight approx. 8,000 kg - BPW axles Technical Data Technical axle load per axle line: - at 5 km/h: 23,000 kg - at 50 km/h: 14,100 kg - at 80 km/h: 12,600 kg Goldhofer THP-ET Vessel Bridge – 75 t Payload Hydraulically extendable vessel bridge, 75,000 kg payload Base width 2,990 mm, hydraulically expandable to 4,640 mm Total vessel bridge length 9,900 mm Internal bridge length approx. 7,500 mm Technically extendable by approx. 5,500 mm Main Beam Dimensions Length: 7,500 mm + 5,500 mm Build height: 500 mm, Width bottom: 470 mm, Width top: 320 mm Goldhofer Heavy-Duty Chassis Module Type THP/ET 5 - Load bed length 7,000 mm x 2,750 mm - Load height 1,250 mm - Longitudinal and lateral combinable chassis module - Box-type central frame with integrated air and hydraulic oil tanks Pedpfx Aewuixfohksrc - Optimized bolt-lug coupling front and rear for longitudinal combinations - Two single-tired pendle axle units with a total of 4 wheels per axle line - Axle units mounted to the vehicle frame via turret bearings - Hydraulic axle compensation +/- mm, hydropneumatic gas spring suspension, and hose rupture safety valves on all axle units - Integrated hydromechanical 2-circuit all-wheel forced steering in the chassis with maximum steering angle of the axle units at 60° - 2-line all-wheel air brake and spring-actuated parking brake - Hydraulic locking pins - Unladen weight approx. 13,000 kg - BPW axles Technical Data Technical axle load per axle line: - at 5 km/h: 23,000 kg - at 50 km/h: 14,100 kg - at 80 km/h: 12,600 kg

Condition: new, maximum load weight: 25,300 kg, overall weight: 38,000 kg, axle configuration: 2 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment details. Full specifications available upon request. Neck (Gooseneck) * Gooseneck in SNT design to optimize loading platform length * Approx. 3,750 mm long, hydraulically liftable/lowerable and detachable * Technical fifth wheel load: 25,000 kg For tractors: 4x2 and 6x2 Kessel Bridge (Tiefbett section) * Low bed designed as extendable Kessel bridge in SUPER LOW design * Approx. 6,850 mm length * With mechanical locking * Service lines routed protected inside the extendable beams, automatically adjusting to match the low bed’s length Rear Chassis * Short version with closed outer frame and checker plate cover * Chassis with excavator trough, closed at the rear half to accommodate air tanks Axles * BPW axles and suspension, all axles hydro-mechanically forced steered * Technical axle load: 12,000 kg per axle * Air suspension with lifting and lowering valve Tires * GOODYEAR KMAX T 3PMSF (M+S) 245/70 R 17.5 twin tires. Load index 143/141J (146/146F) Brake system * Brand: WABCO, EBS-E according to EU regulations, without connection cable to the tractor unit Paintwork * 6-Coat final treatment * All-steel construction shot-blasted after welding * 1 layer of zinc-based primer * 1 layer of adhesion primer. Final coating with 2 coats of 2-component acrylic paint in a single color, followed by cavity sealing with special wax Trailer color * RAL 3002 Carmine Red * Rim color: Silver grey * Drop side color: Natural aluminum Accessories included * Removable steel front wall, approx. 400 mm high * 3 kW electro-hydraulic unit for hydraulic operations (except for hydraulic winches). Without supply connection installed on tractor unit * Spare wheel carrier in front of the gooseneck front wall * Side beams of the gooseneck with fixing holes for bolted lashing rings; first hole approx. 200 mm from the front, then at approx. every 400 mm * 2 pairs of screw-in lashing rings included (LC 5,000 daN) Predpfov Sw E Ajx Ahkec * 1 lashing ring each left and right on the rear taper of the gooseneck (LC 6,000 daN) * 2" king pin * Hydraulic cross member for supporting the gooseneck on the tractor unit or a dolly * Air connection with air gun at the gooseneck * 1 pair of steel ramps with climbing strips and securing pins to bridge the mountings of the low bed * 1 lashing ring each left and right on the front cross member (LC 10,000 daN) * Outer side beams of the loading area prepared for removable loading floor * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the inside carrier’s exterior of the loading area * Lashing rings with retaining spring at approx. every 1,200–1,300 mm on the outer carrier’s exterior of the loading area (LC 10,000 daN) * Cut-outs above the lashing rings in the outer carrier’s upper flange * Mechanical pin-tab coupling from low bed to rear chassis, for swapping the loading floor or installing extension beams, with electro-pneumatic-hydraulic couplings * The outer carriers of the low bed coated with anti-slip sand finish for slip resistance * 2nd ride height for high ride position, max. ± 50 mm from normal ride position, without installation of controls from the tractor unit * 1 pair lashing rings with retaining spring at the transition from the low bed to the excavator trough (LC 10,000 daN) * Front and rear tapers

Condition: used, maximum load weight: 120,000 kg, axle configuration: > 3 axles, first registration: 10/1993, Year of construction: 1993, Equipment: ABS, Manufacturer: GOLDHOFER Type: THP-SL Year of manufacture: 1993 / 2010 Prsdpst Irxxofx Ahksc consisting of: - gooseneck with hydraulic unit (year of manufacture: 1993 - hydraulics: 2003) - 2-axle chassis module (year of manufacture: 2010) - 3-axle chassis module (year of manufacture: 1993) - 4-axle chassis module (year of manufacture: 1993) - excavator bed 5.8m rigid (year of manufacture: 2010 - payload 100 tons) - excavator bed 8m + 5m extendable (year of manufacture: 1993 - payload 120 tons) Available immediately. Subject to errors and prior sale.

Condition: new, empty load weight: 13,250 kg, maximum load weight: 47,550 kg, overall weight: 60,800 kg, axle configuration: > 3 axles, suspension: air, tire size: 245/70 r17.5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10°. 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform in extendable version: Loading area in extendable version with rear bevel of approx. 1,000 mm x 8° 5 pairs of lashing rings can be folded outwards 3 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 40,000 kg Seat posts: JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load) Axles and tires: BPW axles and suspension, 1st axle rigid, all other axles hydro-mechanically forced steered Technical axle load: 12,000 kg Air suspension with lifting and lowering valve Axle tool Tires 245/70 R 17.5 Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit Steel construction: Steel construction made of high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Coating: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Electrical system: Prsdpfx Ael Uxdkehksc Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Accessories included: 2" kingpin One galvanized steel end wall approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 4 restraining shoes with holder on the bulkhead One spare wheel with holder in front of the bulkhead Electro-hydraulic unit Re-steering from the front and rear by means of cable remote control operated via pushbuttons with tracking control of the axles Mounting in the rear area of the gooseneck for ALU docking lights European reflector plates (red/yellow) at the rear of the trailer White reflective tape in accordance with EU regulations on the side, on the extension and at the rear Red On the gooseneck and on the ramps on the left and right, a holder for the warning signs including a socket A bracket for a rotating beacon at the rear of the trailer Galvanized folding supports under the sloping loading area Operating valves for the ramps fitted on the right-hand side of the trailer Cover plates to bridge the gap between the ramps and the cargo bed A mud flap at the rear of the trailer Manual and description on USB stick BEKAMAX (Pico) central lubrication system with NLGI-2 standard grease and removable protection around the pump ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm The rear galvanized stanchions are removable Length of the body approx. 2,560 mm One tool box INOX 1,350 x 400 x 400 on the gooseneck Box covered oil filler plug 4 pairs of WADER container pockets in t

Condition: used, axle configuration: 3 axles, first registration: 02/2001, total length: 13,350 mm, total width: 2,550 mm, suspension: air, tire size: 245/70R17.5, color: red, Total length: 1334 cm + 1950 cm. Loading bed length: 915 cm + 1950 cm. Loading height: 100 cm. = Further information = Axle configuration Tire size: 245/70R17.5 Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Twin tires; Steerable; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 30%; Tire tread depth, right outer: 30% Rear axle 2: Twin tires; Steerable; Tire tread depth, left inner: 50%; Tire tread depth, left outer: 50%; Tire tread depth, right inner: 50%; Tire tread depth, right outer: 50% Rear axle 3: Twin tires; Steerable; Tire tread depth, left inner: 30%; Tire tread depth, left outer: 30%; Tire tread depth, right inner: 30%; Tire tread depth, right outer: 30% Weights Prjdpfxsycf Hts Ahksc Unladen weight: 15,650 kg Payload: 29,350 kg GVW: 45,000 kg Identification Model number: 3 ABSD-48/3 / 3 x EXTENDABLE / 3 = Company information = ALL PRICES ARE NET FOR EXPORT. (Joris Versteijnen NL-DE-GB, Wouter Greutink NL-DE-GB-ES-IT) We speak Russian. We make every effort to provide accurate information. However, no rights can be derived from the information provided.

Condition: used, maximum load weight: 43,640 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 10/2013, Semi-trailer with air suspension and hydraulic dual-circuit forced steering (turntable steering) Loading platform from 15,475 mm up to 54,575 mm Loading Platform - "Flatbed" design, quadruple extendable, stepped gooseneck - Mechanical landing gear - Front corners at 90°, closed external frame - Integrated steering linkage in the front frame - Turntable-mounted fifth wheel plate with interchangeable 2" kingpin and adjustable steering wedge - Rear crossmember as sturdy underride protection Chassis - 4-axle chassis with air suspension including lifting and lowering valve - BPW axles with adjustable tapered roller bearings Braking System - Dual-line, full-air, all-wheel brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABV (ABS) Pjdpfoyltm Hsx Ahkerc Loading Platform L x W 15,475 mm x 2,520 mm Extendable: 9,800 mm + 9,700 mm + 9,800 mm + 9,800 mm, total length up to 54,575 mm Loaded loading height: 1,305 mm At a loaded saddle height: 1,300 mm Rear steering radius: 2,350 mm Gooseneck: 25,000 kg Axle loads: 4 x 10,000 kg Steering 1st – 4th axle hydromechanically forced-steered (dual-circuit steering) (turntable steering) Electric power pack with radio remote control

Condition: used, functionality: fully functional, empty load weight: 9,000 kg, maximum load weight: 29,000 kg, overall weight: 38,000 kg, first registration: 08/2020, color: red, Year of construction: 2020, ES-GE 2-axle low-bed, non-telescopic, Tridec steering Total weight: 38,000 kg Aggregate load (2 x 10,000 kg): 20,000 kg Fifth wheel load: 18,000 kg Unladen weight +/- manufacturer's tolerance: approx. 9,000 kg Payload: approx. 29,000 kg Overall length: approx. 13,650 mm Overall width: approx. 2,540 mm Length of loading area: approx. 13,200 mm Width of loading area: approx. 2,540 mm Front overhang: approx. 1,200 mm Front radius: approx. 1,750 mm Swing-through radius SZM: approx. 2,100 mm Saddle height: approx. 1,150 mm B dimension: approx. 12,000 mm Length of high bed: approx. 3,700 mm Loading height high bed: approx. 1,480 mm Length of low bed: approx. 6,500 mm Loading height low bed: approx. 250 mm Ground clearance low bed: approx. 100 mm Loading height above axle unit: approx. 3,000 mm Specification SZM A dimension: approx. 4,500 mm Semi-mounted height: approx. 1,150 mm Swing-through radius: approx. 2,100 mm Chassis: - Chassis made from high-quality fine-grained steels - Drop deck in rigid design - Axle unit cannot be lowered - Without excavator trough King pin -2" kingpin Supports - without front jacks Axles - 2 x 10,000 kg axles (17.5"), techn. 12,000 kg each - Gigant make - Closed drum brake. Asbestos-free brake linings - Automatic slack adjusters. Center centering - Center distance approx. 1,360 mm Suspension - Air suspension with lifting and lowering - 2nd ride height for air suspension (+ approx. 30 mm) Steering - Hydraulic stub axle steering - All axles are steered. Make "Tridec" Tires - 9 tires 245/70 R 17.5 with load index 146/146 F - Continental tires - Steel rims Brake - Dual-circuit air brakes in accordance with EC directive, make "Knorr" - Automatic load-dependent brake force control - Controlled via standard red/yellow air clutches in accordance with ISO 1726 - Electronic brake, "EBS", 7-pin socket in accordance with ISO 7638, mounted at the front, in accordance with EU directives. WITH ABS 4S/2M - With RSS (Roll Stability Support) - Parking brake by means of spring-loaded cylinder - 4 wheel chocks with holder - Without connecting hoses (reversible flex) to the tractor unit - Aluminum air reservoir - TIMG2 (Trailer Information Module) fitted to read out the current axle loads Pedsu U Np Topfx Ahkjrc Underride guard - Integrated in the rear end plate Side frame - Side frame made of UNP steel approx. 200 mm Load securing - 13 lashing points per side with 13,400 kg tensile force, can be folded outwards, mounted in the outer frame - 1 pair of lashing rings with approx. 13,400 kg lashing force in the rear area of the gooseneck, approx. 400 mm from the floor - 1 pair of lashing rings with a tensile force of approx. 13,400 kg at the rear in the low bed on the vertical neck - 7 stake pockets per side on the inside of the outer frame, for stakes approx. 80x50x4 mm, evenly distributed in the outer frame over the entire length of the cargo bed - 6 stake pockets welded to the outside of the side member on each side Floor - Approx. 28 mm thick hardwood floor with omega profiles, laid between the side members - Tear plate (approx. 8/10 mm) over the axle unit Front wall - Designed as a storage box with lid, approx. D 400 x H 450 mm, across the entire width of the loading area, beveled corners Drop sides - 3 plug-in anodized drop sides on the gooseneck, approx. 2,440 x 400 mm - Rear stanchions, galvanized Galvanization - Steel blasting of all iron parts - Galvanizing of the chassis Painting - Priming and single-color painting in RAL 3002 chi

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Custom-Made Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized according to customer requirements. Chassis, Saddle, and Haulage Company Fine-grained steel welded construction in lightweight design, saddle plate with interchangeable 2 kingpins, main frame reinforcement for 25 tons, with center of gravity at 3 m load length in the retracted state. 13 pairs of hooks for securing lashing straps, welded onto the crossbeams 23 pairs of lashing eyes recessed into the outer frame, each 3.5 tons Outer frame with Load-Lock profile for attaching lashing straps Note! Not usable with sideboards! 24 tons, 2-speed support winch in reinforced design for loaded coupling/uncoupling, single-sided operation Chocks with holder Aluminum side impact protection Under-run protection Half-shell fenders with anti-splash flaps according to EC 1 spare wheel holder for 1 tire, with wheel fastening kit 1 closed storage box for stakes, open at the top, below the loading area, doors on both sides, w=450 mm/h=400/420 mm/d=2460 mm 6 pairs of pull-out stake pockets, for rectangular section stakes 80x80 mm, extendable from loading width of 2000 mm to 3100 mm 4 pairs of stake pockets recessed into the outer frame, for rectangular section stakes 80x80 mm 11 stake pockets recessed in the center of the floor, for rectangular section stakes 80x80 mm, with reinforcement beam, installed between the outer stake pockets 5 x 3 pairs of stake pockets recessed into the outer longitudinal beams, for rectangular section stakes 80x80 mm, including reinforcement beams - for load securing to the front and rear during the transport of reinforcing steel mats, 2x5000 mm or 2x 6000 mm 6 lightweight plug-in stakes, w=80/d=80/, usable height approx. 1850 mm, hot-dip galvanized, with rope guide at the top for strap tensioning 12 lightweight plug-in stakes, w=80/d=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Note: Stake pockets/plug-in stakes are not designed for the sole securing of long materials, pipes, etc. without strapping. 2 plastic toolboxes, with drawer and insert, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 steel winches with wire rope and clevis hook, with rope guide through the outer frame, 1 removable gearhead for steel winch - supplied loose Telescoping Main frame telescoping extendable by a maximum of 4,000 mm and lockable every approx. 500 mm Prsdpsi Ri Szjfx Ahksc Locking with pneumatic pin locking + indicator for frame locking on both sides, operated via hand knob, operation for brake/locking and suspension on the control panel on the left side in front of the axles Storage compartment between the longitudinal beams in the extended state Axles + Suspension SAF disc brake axles with 430 mm disc diameter Last axle with trailing arm, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand knob, as well as manually via switch in the towing vehicle (Pin 10), without truck installation. Axle track offset mm Air suspension 1st axle automatic lift axle, additionally electrically operable from the truck, with starting aid Braking System 2-line compressed air braking system Colored line routing for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front EBS manufacturer according to the manufacturer's choice, electronic braking system with EBS

Condition: new, total length: 7,000 mm, total width: 1,350 mm, color: blue, Unladen weight: 14,200 kg Payload: 100,000 kg GVWR: 114,200 kg Height of the loading platform: 45 cm Extendable body: Yes Overall condition: very good Technical condition: very good Prjdpfx Ajuu Hhbjhksc Optical condition: very good Price: Upon request