SCHEUERLE Intercombi Excavator deck

SCHEUERLE Intercombi Excavator deck

Condition: new, empty load weight: 22,700 kg, maximum load weight: 79,300 kg, overall weight: 102,000 kg, axle configuration: > 3 axles, loading space length: 11,000 mm, loading space width: 2,850 mm, loading space height: 920 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 22,700 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading platform length, length approx. 3,750 mm, with a rear slope of approx. 850 mm x 10° -Hydraulically extendable and retractable, stroke +- 250 mm incl. hydraulic connection connected to the hydraulic axle compensation of the first two axles -Open in the rear third -For semi-trailer tractors: 6 x 4 and 8 x 4 Loading platform: -Loading platform in extendable design, length approx. 11,000 mm with a slope at the rear of approx. 500 mm x 10°. -A recess in the loading platform and into the slope to accommodate the excavator arm, approx. 4,240 x 900 x 440 mm -Pneumatic locking with tapered locking pin and reinforced locking positions, the supply lines are protected in the extendable beams and automatically adapt to the respective loading platform length Ramps: -A pair of two-part steel ramps with a length of approx. 4,650 mm and a width of approx. 900 mm -Hydraulically folding ramp tips. -Ramps can be individually hydraulically shifted outwards by approx. 235 mm and inwards by approx. 215 mm Dsdpsk Af Svefx Aaiekp -Rubber flooring "Super Grip" 25 mm and sheet metal flooring approx. 5 mm as additional reinforcement on the slope of the loading platform -Square climbing strips 20x30 mm, approx. every 200 mm on the outer frame of the ramp Axles, suspension and tires: -PA-X axle system, all axles hydro-mechanically forced steering -The steering behavior of the two front axles can be optimally adjusted both mechanically and hydraulically to the loading platform length. -Hose rupture valve on the axle compensation cylinders with automatic RESET function. -Hydraulic cylinders with shut-off valves and quick-release couplings to secure in the raised position. -245/70 R 17.5 3PMSF Included accessories: -Steel headboard, pluggable, approx. 400 mm high -Connection strip for supply lines to the semi-trailer tractor, mounted at the height of the outer frame profile -1 spare wheel -Outer carrier of the gooseneck with mounting holes for screwable lashing rings -The first hole approx. 200 mm from the front, then approx. every 400 mm -2 pairs of screw-in lashing rings included -Diamond plate flooring above the gooseneck -On the gooseneck, 1 pair of pluggable aluminum sideboards, approx. 400 mm high, anodized -On the gooseneck, a pluggable aluminum rear panel, approx. 400 mm high, anodized -3.5" kingpin / 2" kingpin mounted -Guide plate of the gooseneck for the turntable, approx. 500 mm wide -4 wheel chocks -4 axle load manometers -Mechanical outrigger supports at the front -1 INOX toolbox, one-piece, approx. 2,480 x 340 x 390 mm -Mechanical outrigger supports at the front -Continuous sheet metal flooring on the loading platform with a sand coating as an anti-slip measure -1 intermediate table, approx. 500 mm wide, for the extension, with elongated holes for attaching and adjustable bridging elements -Sand coating on the support surfaces of the intermediate table -Mechanical locking to lock the intermediate table to the extension -8 pairs of pocket rails in the outer frame -Extensions (galvanized), extendable by approx. 230 mm on each side -1 pair of hydraulic rear supports -Central lubrication system -1 reversing light on the left and right at the rear of the vehicle -3 kW electric-hydraulic unit -Extension planks, loose, in reinforced steel U-profile -Wireless and cable remote control -4 warning signs, approx. 423 x 423 mm

Condition: excellent (used), axle configuration: > 3 axles, permissible axle load (axle 1): 11,000 kg, permissible axle load (axle 2): 11,000 kg, permissible axle load (axle 3): 11,000 kg, loading space length: 15,500 mm, loading space width: 2,740 mm, loading space height: 1,050 mm, total length: 15,500 mm, total width: 2,740 mm, suspension: hydraulics, tire size: 245/ 70R17.5 | load index 146/146F, color: blue, Year of construction: 2003, Color: Blue Load capacity: 73,500 kg Extendable Main Features Manufacturer: Nooteboom Type: MCO-85-06 V/Z – Double Extendable Chassis number: XMRMC000030000456 Year: 2003 Weights/Loading Capacity King-pin load: 27,500 kg Axle load: 11,000 kg Total axle load: 66,000 kg GVW: 93,500 kg Empty weight: 20,200 kg Loading capacity: 73,500 kg Axles Brand axles: SAF Hydraulic suspension First axle rigid Axles 2 – 6 hydraulic steering High low valve WABCO braking system with EBS Tires: 245 / 70 R17.5 | load index 146/146F Dimensions Length: 15,505 mm Extensions: +8,800 mm + 8,800 mm Max extended length: 31,105 mm Loading floor length: 11,520 mm Maximum loading floor length: 29,120 mm Loading floor width: 2,740 mm Height: 1,050 mm Additional Information NATO plug Hydraulic operated Gooseneck Outriggers Double extendable Lashing rings Manual landing gear Electro hydraulic pump for trailer functions Rear bumper with lights King-pin 3.5” Central greasing with 2 pumps = Further Information = General Information Year of construction: 2003 Axle Configuration Tire size: 245/70R17.5 | load index 146/146F Axle brand: SAF Suspension: hydraulic suspension Rear axle 1: Twin tires; Max. axle load: 11,000 kg Rear axle 2: Twin tires; Max. axle load: 11,000 kg; Steerable Rear axle 3: Twin tires; Max. axle load: 11,000 kg; Steerable Rear axle 4: Twin tires; Max. axle load: 11,000 kg; Steerable Rear axle 5: Twin tires; Max. axle load: 11,000 kg; Steerable Rear axle 6: Twin tires; Max. axle load: 11,000 kg; Steerable Weights Empty weight: 20,200 kg Dsdpfx Aasv E Rcheijkp Payload: 73,299 kg GVW: 93,500 kg Functional Loading floor height: 105 cm Extendable body: Yes Condition Technical condition: very good Optical condition: very good Financial Information Price: Upon request

Condition: used, maximum load weight: 120,000 kg, axle configuration: > 3 axles, first registration: 10/1993, Year of construction: 1993, Equipment: ABS, Manufacturer: GOLDHOFER Type: THP-SL Dedpfx Aaet Irxxsiekp Year of manufacture: 1993 / 2010 consisting of: - gooseneck with hydraulic unit (year of manufacture: 1993 - hydraulics: 2003) - 2-axle chassis module (year of manufacture: 2010) - 3-axle chassis module (year of manufacture: 1993) - 4-axle chassis module (year of manufacture: 1993) - excavator bed 5.8m rigid (year of manufacture: 2010 - payload 100 tons) - excavator bed 8m + 5m extendable (year of manufacture: 1993 - payload 120 tons) Available immediately. Subject to errors and prior sale.

Condition: used, overall weight: 120,000 kg, axle configuration: > 3 axles, first registration: 07/1999, Goldhofer STHP-ET Gooseneck Main Features - Turntable-mounted fifth wheel plate, 3.5" kingpin, and adjustable steering wedge - Built-in hydromechanical double steering for attachment of pendle axles (2-circuit steering, 4 hydraulic cylinders) - Hydraulic lifting and lowering function, including support cylinders - Hydraulic differential lock - Designed loading area (approx. 3,700 x 2,440 mm) with chequer plate cover - Engineered for a technical fifth-wheel load up to 30 t - Steering radius of 2,800 mm for use with a 4-axle tractor unit - Coupling heights loaded: 1,350 mm - Aluminium side walls (400 mm high, on all 4 sides) Goldhofer Heavy-Duty Chassis Module Type THP/ET 3 - Load bed length 4,200 mm x 2,750 mm - Load height 1,250 mm - Longitudinal and lateral combinable chassis module - Box-type central frame with integrated air and hydraulic oil tanks - Optimized bolt-lug coupling front and rear for longitudinal combinations - Two single-tired pendle axle units with a total of 4 wheels per axle line - Axle units mounted to the vehicle frame via turret bearings - Hydraulic axle compensation +/- mm, hydropneumatic gas spring suspension, and hose rupture safety valves on all axle units - Integrated hydromechanical 2-circuit all-wheel forced steering in the chassis with maximum steering angle of the axle units at 60° - 2-line all-wheel air brake and spring-actuated parking brake - Hydraulic locking pins - Unladen weight approx. 8,000 kg - BPW axles Technical Data Technical axle load per axle line: - at 5 km/h: 23,000 kg - at 50 km/h: 14,100 kg - at 80 km/h: 12,600 kg Goldhofer THP-ET Vessel Bridge – 75 t Payload Hydraulically extendable vessel bridge, 75,000 kg payload Base width 2,990 mm, hydraulically expandable to 4,640 mm Total vessel bridge length 9,900 mm Internal bridge length approx. 7,500 mm Technically extendable by approx. 5,500 mm Main Beam Dimensions Length: 7,500 mm + 5,500 mm Build height: 500 mm, Width bottom: 470 mm, Width top: 320 mm Goldhofer Heavy-Duty Chassis Module Type THP/ET 5 - Load bed length 7,000 mm x 2,750 mm - Load height 1,250 mm - Longitudinal and lateral combinable chassis module - Box-type central frame with integrated air and hydraulic oil tanks - Optimized bolt-lug coupling front and rear for longitudinal combinations - Two single-tired pendle axle units with a total of 4 wheels per axle line - Axle units mounted to the vehicle frame via turret bearings - Hydraulic axle compensation +/- mm, hydropneumatic gas spring suspension, and hose rupture safety valves on all axle units - Integrated hydromechanical 2-circuit all-wheel forced steering in the chassis with maximum steering angle of the axle units at 60° - 2-line all-wheel air brake and spring-actuated parking brake - Hydraulic locking pins - Unladen weight approx. 13,000 kg - BPW axles Dksdpfswuixfex Aaisp Technical Data Technical axle load per axle line: - at 5 km/h: 23,000 kg - at 50 km/h: 14,100 kg - at 80 km/h: 12,600 kg

Condition: used, axle configuration: 3 axles, first registration: 02/2001, total length: 13,350 mm, total width: 2,550 mm, suspension: air, tire size: 245/70R17.5, color: red, Year of construction: 2001, Total length: 1,334 cm + 1,950 cm. Loading bed length: 915 cm + 1,950 cm. Loading height: 100 cm. = Further information = Axle configuration: Tyre size: 245/70R17.5 Dkedpeycf Htjfx Aaiop Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Dual tyres; Steered; Tyre tread left inside: 30%; Tyre tread left outside: 30%; Tyre tread right inside: 30%; Tyre tread right outside: 30% Rear axle 2: Dual tyres; Steered; Tyre tread left inside: 50%; Tyre tread left outside: 50%; Tyre tread right inside: 50%; Tyre tread right outside: 50% Rear axle 3: Dual tyres; Steered; Tyre tread left inside: 30%; Tyre tread left outside: 30%; Tyre tread right inside: 30%; Tyre tread right outside: 30% Weights: Unladen weight: 15,650 kg Payload: 29,350 kg Gross vehicle weight: 45,000 kg Financial information: Price: On request Identification: Type number: 3 ABSD-48/3 / 3 x EXTENDABLE / 3 = Company information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-EN), Wouter Greutink (NL-DE-EN-ES-IT), Govorim po russki. We strive to provide correct information but no rights can be derived from the listed texts.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: YA9TL510050113953, empty load weight: 27,720 kg, maximum load weight: 70,000 kg, overall weight: 100,000 kg, axle configuration: > 3 axles, first registration: 08/2005, next inspection (TÜV): 12/2026, loading space length: 14,200 mm, loading space width: 3,250 mm, total length: 23,950 mm, total width: 3,250 mm, total height: 1,050 mm, suspension: hydraulics, color: blue, Year of construction: 2005, number of axes: 7, For sale: low loader from Faymonville. Number of axles: 2+5 = 7 Always serviced in our own workshop and is in top condition. Dkjdsx Afbvepfx Aaiop The trailer has been used exclusively for transports within the EU – Baltics, Germany, and the surrounding region. Approximately 1–2 times every three months. The low loader is located in Latvia, 3405 Liepaja! See details in the photos!

Condition: new, maximum load weight: 34,600 kg, overall weight: 49,000 kg, axle configuration: 2 axles, Year of construction: 2025, EuroCompact FL 02 Flatbed Double-Telescopic with Pendulum Axles Weights & Speed (80 km/h) - Fifth wheel load: 25,000 kg - Axle load: 2 x 12,000 kg - Gross permissible weight: 49,000 kg - Unladen weight: approx. 14,400 kg - Payload: 34,600 kg Gooseneck - Length x width: 3,700 mm x 2,480 mm - Coupling height (laden): 1,300 mm - Steering angle radius front/rear: 1,350 mm / 2,250 mm - King pin, fifth wheel load: 25,000 kg Flatbed Section – Double-Telescopic - Length x width: 6,620 mm + 5,050 mm + 5,330 mm x 2,550 mm - Extendable to 3,000 mm wide - Telescoping range: 5,050 mm + 5,330 mm, extendable to 17,000 mm bed length - Deck height: 260 mm - Loading height when laden: approx. 360 mm at 100 mm ground clearance Rear 2-Axle Chassis - Wheelbase: 1,360 mm - Single tires: 245/70 R 17.5 - Gigant pendulum axles, 12-14 t axle load - Steering: Forced steering - Excavator recess integrated at rear chassis - Chassis length: 2,700 mm Additional Equipment: - Radio remote control for all functions - Central lubrication system - Electric power unit - Drive-on ramps - Container locks in the lowbed section Dkedex Nupxspfx Aaiep - Extensions

Condition: excellent (used), mileage: 28 km, power: 520 kW (707.00 HP), first registration: 04/2026, fuel type: diesel, axle configuration: 6x6, wheelbase: 4,150 mm, fuel: diesel, fuel tank capacity: 400 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: other, emission class: euro3, Year of construction: 2026, Equipment: ABS, air conditioning, differential lock, electric window regulation, retarder, trailer coupling, = Additional Options and Accessories = - All-wheel drive - Leaf spring suspension - Differential lock - Intarder - Cab - Sun visor - Power take-off (PTO) - Tow hitch = Additional Information = Transmission: Continuously variable transmission Front axle: Steerable Number of cylinders: 6 Dsdpfx Aajyyynnoiskp GVWR: 180,000 kg Body manufacturer: TURBO RETARDER CLUTCH Technical condition: very good Optical condition: very good

Condition: used, maximum load weight: 43,640 kg, overall weight: 65,000 kg, axle configuration: > 3 axles, first registration: 10/2013, Semi-trailer with air suspension and hydraulic dual-circuit forced steering (turntable steering) Loading platform from 15,475 mm up to 54,575 mm Loading Platform - "Flatbed" design, quadruple extendable, stepped gooseneck - Mechanical landing gear - Front corners at 90°, closed external frame Dodpsyltm Hsfx Aaiskp - Integrated steering linkage in the front frame - Turntable-mounted fifth wheel plate with interchangeable 2" kingpin and adjustable steering wedge - Rear crossmember as sturdy underride protection Chassis - 4-axle chassis with air suspension including lifting and lowering valve - BPW axles with adjustable tapered roller bearings Braking System - Dual-line, full-air, all-wheel brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring-loaded cylinders - ABV (ABS) Loading Platform L x W 15,475 mm x 2,520 mm Extendable: 9,800 mm + 9,700 mm + 9,800 mm + 9,800 mm, total length up to 54,575 mm Loaded loading height: 1,305 mm At a loaded saddle height: 1,300 mm Rear steering radius: 2,350 mm Gooseneck: 25,000 kg Axle loads: 4 x 10,000 kg Steering 1st – 4th axle hydromechanically forced-steered (dual-circuit steering) (turntable steering) Electric power pack with radio remote control

Condition: used, overall weight: 60 kg, axle configuration: > 3 axles, first registration: 03/2007, Equipment: ABS, 2 + 3 axle MODULE for concrete transport – consisting of: Goldhofer THP/ET 2 – 2-axle combination module – WG0THPE2360028508 Technical total weight: 24,000 kg Overall length: 3,160 mm Unladen weight: 5,600 kg Dkjdpfx Aaozhdhlsisp Goldhofer THP/ET 3 – 3-axle combination module – WG0THPE3460029177 Technical total weight: 36,000 kg Overall length: 4,560 mm Unladen weight: 8,000 kg Trailer drawbar – 40 mm BPW Eco Plus axles with drum brakes – oscillating axles Hydraulic suspension Vehicle width: 2,750 mm Central lubrication system Tires: 285/70 R 19.5 Modifications, prior sales and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a guarantee in the legal sense of purchase. The description according to the purchase agreement is binding. Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops! The vehicle may be fitted with advertising or lettering. Our general terms and conditions of delivery and payment apply.