Used three-way tipper trailers for sale (502)

Condition: new, maximum load weight: 8,600 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 11.9 Masterline: ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: * Height-adjustable, hot-dip galvanized drawbar by 300 mm with a 40 mm flange coupling ----Electrical system / Lighting: * TPMS tire pressure monitoring system * LED lighting * 15-pole electrical connector ----General components: * Tool box made of galvanized sheet steel on the right side * Bolted underrun protection * Plastic quarter fenders * Jost mechanical front support legs * 2 mechanical, hot-dip galvanized folding support legs at the rear ----Tipping bridge: * Net hooks on the side and at the rear in the bearings of the central locking system, as well as 3 pieces on the outside of the front wall * Hot-dip galvanized chassis * Steel 3-sided tipping body * Continuous side walls without a center rail, foldable with side board spring supports * Folding tailgate and pivoting over a manual central locking system * Hot-dip galvanized, bolted rear rail * 4 mm steel sheet floor * Mounting rail at the rear for loading ramps ----Load securing: * 1 x 5 ton recessed and foldable lashing points in each corner * As well as 4 x 3 ton lashing points on each side, recessed in the outer frame and foldable ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 tons / pair) suitable for vehicles with rubber tires and tracked vehicles * Lockable storage compartment at the rear under the loading area, integrated into the chassis ----Tires: * Tires 235/75 R 17.5 ----Painting: * Axles, springs, air tanks, drawbar and support legs painted in a black tone * Side board painted in RAL 9010 pure white * Painting of the side walls in an RAL color possible at an extra charge * Floor and front wall hot-dip galvanized ----Information: Pedpov Dz N Ajfx Ahkjrc * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from approximately week 45/2026

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 14.4 ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 tons Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange coupling: * Height-adjustable, hot-dip galvanized drawbar by 300 mm with 40 mm flange coupling ----General components: * Jost mechanical front support jacks * 2 mechanical, hot-dip galvanized folding support jacks at the rear * Hot-dip galvanized bolted under-run protection * Tool box made of galvanized sheet steel on the right side * Plastic quarter fenders * 2-step step on the left side as an aid for getting on ----Electrical system / Lighting: Psdov Dz N Nopfx Ahkerc * TPMS tire pressure monitoring system * 15-pole power socket * LED tail lights ----Tipping bridge: * Steel, 3-sided tipping body * Continuous side walls at the top with internal tube reinforcement - without center supports - foldable with side panel spring lifters * Folding rear gate and pivoting via manual central locking * Hot-dip galvanized bolted rear supports * 4 mm sheet steel floor made of fine-grained steel * Lashing hooks, receiving rail at the rear for loading ramps * Preparation for later retrofitting of side panel attachments ----Chassis: * Hot-dip galvanized chassis ----Load securing: * 1 x 5 tons lashing eye in each corner, as well as 4 x 3 tons lashing eyes on each side embedded in the outer frame ----Aluminum loading ramps: * 1 pair of aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 tons / pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear below the loading area, embedded in the chassis ----Tires: * Tires 385/55 R 22.5 ----Painting: * Axles, springs, air tanks and support jacks painted in a black tone * Chassis, drawbar, floor, front panel, folding supports hot-dip galvanized * Painting of the side panels in a RAL color of your choice (but no special or metallic paint) can be changed up to approximately 6 weeks before completion ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle without initial registration with manufacturer's warranty * Errors and prior sale subject to change ----Delivery time: * Available from approximately week 45 / 2026

Condition: used, maximum load weight: 13,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2021, next inspection (TÜV): 02/2027, loading space length: 5,200 mm, loading space width: 2,400 mm, loading space height: 600 mm, Year of construction: 2021, Equipment: ABS, Well-maintained and rarely used three-sided tipper with a low-loader design. Features: Combination door and hinged flap at the rear Spring-assisted lifting mechanism on the side walls Side walls with hinged support Aluminum access ramps stored under the tipper Numerous lashing points Podpfoznhr Iox Ahkorc Tire condition: approx. 70% Please call for any questions regarding the equipment. Errors and prior sale excepted!

Condition: used, functionality: unexamined, empty load weight: 3,050 kg, maximum load weight: 10,450 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 09/2003, next inspection (TÜV): 06/2026, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 1,100 mm, suspension: steel, tire size: 285/70R19,5, tire condition: 40 %, maximum speed: 80 km/h, color: orange, trailer brake: trailer braked, Year of construction: 2003, Equipment: ABS, Central locking on all 3 sides, tilting cylinder is tight, rust damage and signs of wear, brakes should be adjusted. Includes body, total height of the body is 1.10 meters. Ideal trailer for a Unimog or truck. Prjdpfx Aheznmh Iokjc Sold as is, TÜV inspection due.

Condition: new, empty load weight: 880 kg, maximum load weight: 2,120 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 950 mm, total length: 4,500 mm, total width: 1,930 mm, total height: 1,860 mm, tire size: 13, trailer brake: trailer braked, Year of construction: 2026, Humbaur three-way tipper with electric pump and mesh extension 600mm - HTK 3000.31 Prsdpszt N Axsfx Ahkoc Our price: €7,750 incl. 19% VAT, 6.4% delivery costs and registration documents! Description: The HTK three-way tipper impresses not only with our usual high quality standards. It is equipped with a practical hand pump, which you can also replace with an electric hydraulic pump at any time if needed. From a permissible total weight of 3,000 kilograms, the electric and hand pump are installed as standard in the trailer. This means that tipping your load will no longer be a challenge, but a piece of cake! Technical data: Trailer type - Twin axle Construction type - Aluminum Rear tipper - 45° Three-way tipper - 45° Weight - 880 kg Total weight - 3,000 kg Payload - 2,120 kg Internal length - 3,140 mm Overall length - 4,500 mm Internal width - 1,750 mm Overall width - 1,930 mm Internal height - 350 mm + 600 mm steel mesh extension Overall height - 1,260 mm + 600 mm steel mesh extension Loading height - 745 mm Tires - 13 inches Standard equipment: V-shaped drawbar, hot-dip galvanized Chassis and tipping platform, hot-dip galvanized Tipping platform made of steel, manufactured in one piece Hand pump, optional electric hydraulic pump from 3000 kg permissible total weight, electric and hand pump Humbaur multi-function lighting Side walls made of anodized aluminum, completely removable Rear flap, hinged Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring Support wheel Plank slot as preparation for aluminum planks for easy retrofitting

Condition: new, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 10 m³, Equipment: ABS, with roll tarp rear wall with cam lock swinging and foldable left side wall with spring relief swinging right side wall swinging rear wall floor: 5 mm HBW 450 (Hardox® 450 or comparable material) Prodpjy Ngwzefx Ahksc BPW axles disc brakes for rim size 22.5" offset ET120 air suspension tipper color: pure white RAL 9010 top-of-the-line equipment rent, buy, lease-to-own rent from 540 euros net per month with full service (rental prices vary depending on the term) all information can be found at / Lease-to-own example: 560 euros net per month for a term of 48 months, with a down payment of 7500 euros net and a final payment of 5000 euros net all information is net, plus VAT, and subject to a positive credit check New in stock special price with cover disc brake air suspension many extras

Condition: new, Rear tipper trailer Manufacturer: Cheval Liberte Debon Model: PW0E Eco 1500 Internal dimensions: 2450 x 1550 x 300 mm (L x W x H) External dimensions: 3830 x 1670 x 700 mm (L x W x H) Gross vehicle weight rating: 1500 kg Unladen weight: approx. 430 kg Payload: approx. 1070 kg (payload may vary depending on equipment and construction) Loading height: 700 mm Manual emergency pump Sturdy, welded and hot-dip galvanised steel frame Aluminium side panels, openable and removable on all four sides with tension locks Wooden floor Protected front and rear lighting Automatic jockey wheel 13-pin plug Incl. vehicle documents Optional equipment and accessories available for this trailer: Shock absorbers incl. 100 km/h certification Ladder rack Electric hydraulic pump 600 mm mesh extension 300 mm aluminium side wall extension Rear supports Spare wheel incl. holder Tarpaulin superstructure in various heights and colours Load securing net Anti-theft device Registration of your new trailer at the road traffic authority We would be pleased to show you how you can conveniently finance your new trailer in affordable monthly installments and will be happy to provide you with an individual financing offer. We have over 2,000 trailers in stock at all times. You can find a wide selection of our trailers online at Or visit us in Horn-Bad Meinberg – we look forward to seeing you! Pjdoy I Uxdspfx Ahkorc Images may show accessories not included in the standard delivery. Due to continuous product improvements, illustrations and technical data may vary slightly. Errors and changes excepted!

Condition: new, Three-way tipper trailer with electric pump Manufacturer: Böckmann Model: DK-AL 3218/30 Internal dimensions: 3240 x 1800 x 350 mm (LxWxH) Gross vehicle weight: 3,000 kg Unladen weight: approx. 955 kg Payload: approx. 2,045 kg (payload figures may vary depending on equipment and configuration) Wheel size: 14 inches Electric hydraulic pump with 12 V/88Ah battery and emergency hand pump Automatic jockey wheel Removable steel corner posts Track channel in upper frame (easy retrofitting of loading ramps) Removable side panels 4 sturdy, rattle-free lashing rings Safety support for securing the tipping body during maintenance Fold-down front wall Robust lever locks on the side panels Plastic rear mudguards incl. mud flaps Heavy-duty phenolic plywood flooring with galvanized sheet steel cover for high point loads 2 large wheel chocks Front position lights Drop-down front wall for transporting longer materials V-drawbar Robust net hooks laterally beneath the loading area Incl. vehicle documents Possible additional options and accessories for this trailer: Shock absorbers incl. 100 km/h road approval Swing tailgate (shown in photos, not included as standard but available as an accessory) Mesh extension, 600 mm high, foldable on three sides Net hooks mounted all around the side panel Additional side panel extension 350 mm Aluminum loading ramps with 2.7 t load capacity Toolbox mounted on the front wall or under the loading area Load securing net Flat tarpaulin in various colors Registration of your new trailer with the vehicle registration office Pjdpfx Ajy Napkehkerc We would be happy to show you convenient monthly financing options and provide you with a tailored financing offer. We have more than 2,000 trailers in stock at all times. You can find a wide selection of our trailers online or visit us in Horn-Bad Meinberg – we look forward to seeing you! Please note: Images may show accessories and optional equipment not included in the standard delivery scope. Due to ongoing developments, images and technical data may differ slightly. Errors and changes excepted.

Condition: new, Three-way tipper - 2-axle - black side walls Manufacturer: Cheval Liberte Debon Model: PW3.3E Black Edition Internal dimensions: approx. 3300 x 1860 x 350 mm (LxWxH) Gross vehicle weight: 3,500 kg Unladen weight: approx. 805 kg Payload: approx. 2,695 kg (Payload may vary depending on equipment and configuration) Electric hydraulic pump with battery (battery cover) Chassis fully galvanized Aluminum side walls, black, 350 mm high, mounted on the outside for increased loading area Reinforced multiplex floor with galvanized steel plate Front H-frame (galvanized, removable) for transporting long materials 8 lashing rings (4 on each side) Tandem axle Automatic jockey wheel Includes vehicle documentation Available options and accessories for this trailer: Shock absorbers incl. 100 km/h certification Mesh sides Rear telescopic supports Integrated slide-under loading ramps Tarpaulin available in various heights and colors Load securing net Load securing net hooks installed Pedpfx Ahey Ncgrjksrc Spare wheel including holder Anti-theft device Registration of your new trailer at the vehicle registration office

Condition: new, 9932739 Storage container for Konos 35 tipper with 2-axle chassis Internal dimensions: 2500 x 1800 x 1960 mm (LxWxH) Prjdpfx Ahsy I D Ibsksc Unladen weight: 416 kg Completely made of galvanized steel Rear wing doors with container locking system

Condition: new, Special Offer!!! Böckmann Three-Way Tipper with Steel Mesh Extension and Load Securing Net Manufacturer: Böckmann Model: DK-AL 3718/35 P Eco Internal dimensions: 3740 x 1800 x 950 mm (L x W x H) Gross vehicle weight: 3,500 kg Unladen weight: 1,045 kg Payload approx. 2,455 kg (payload may vary depending on equipment and configuration) Electric hydraulic pump with 12 V/88 Ah battery and emergency manual pump Magnetic cable remote control with flexible coiled cable for the electric pump, attaches anywhere on the frame Predpfx Ahsy I D Iuekoc Emergency stop battery disconnect switch ALKO heavy-duty automatic jockey wheel Aluminum sideboards Removable steel corner posts Detachable sideboards Fold-down front wall enables transport of longer materials Pendulum tailgate Mesh extension 600 mm Green load securing net Integrated ramp access flap at the rear Integrated securing bar for attaching loading ramps at the rear Welded and hot-dip galvanized frame and tipping bridge construction for enhanced stability, torsional rigidity, and tipping resistance 4 robust, rattle-free lashing rings (500 kg load capacity each) (contrary to the pictures) Integrated holes in the side frame profile for easy retrofitting of additional lashing eyes 14" tires ensure high ground clearance Safety support strut to secure the tipper body during maintenance Heavy-duty lever locks on the sideboards Plastic mudguards at the rear, including mud flaps Dimensionally stable combi-floor – continuous phenolic plywood reinforced with galvanized steel sheet for high point load capacity and shock resistance Front marker lights 2 large wheel chocks Bolted V-drawbar Protected housing for the battery and all electronics in a splash-proof box Hydraulic hoses safely routed within the longitudinal frame Vehicle documents included Possible additional options and accessories for this trailer: - Ramp compartments including aluminum ramps - Crank supports - Charger for tipper with e-pump and adapter - Side wall extension - Mesh hooks mounted all around the sideboards - Additional 350 mm side wall extension - Toolbox or storage box mounted at the front wall or under the loading area - Flat tarpaulin in various colors - Shock absorbers incl. type approval for 100 km/h - Custom tarpaulin superstructure - Registration of your new trailer with the vehicle registration office

Condition: new, Firewood Trailer Manufacturer: Unsinn Model: UDK-B 3617-35-14 Load bed dimensions: 3660 x 1750 x 1200 mm (L x W x H) Gross vehicle weight: 3500 kg Unladen weight: 1245 kg Psdsy I D Nxspfx Ahksrc Payload: 2255 kg (payload may vary depending on equipment and configuration) Tyres: 185 R14 C Automatic jockey wheel Shock absorbers (required for 100 km/h approval) Single-piece steel floor, edge-bent across full width Patented cargo securing system with 14 lashing pins on and under the loading platform Each pin rated for 1500 daN (kg), rotatable 360° Side walls fixed on three sides Rear pendulum tailgate Flexible aluminium partition wall, can be slotted in at various positions for flexible cargo area division Robust rear fold-down supports for stable positioning even when the trailer is uncoupled Electric pump Manual emergency pump (pumpless system) Additional hydraulic connection for towing vehicle 2 rear work lights 13-pin lighting system Reversing light 2 plastic toolboxes, splash-proof, mounted left and right under the load platform Flat tarpaulin to protect dried firewood in bad weather, including storage compartment at the front wall Including vehicle documents Available options and accessories for this trailer: - 100 km/h approval certificate - Spare wheel with holder - Anti-theft device - Drawbar cover - Registration of your new trailer at the local vehicle registration office

Condition: new, Three-way tipper trailer with petrol hydraulic system Manufacturer: Unsinn Model: UDK 3017-35-14 Dimensions: 3060 x 1750 x 350 mm (L x W x H) Loading height: 770 mm Permissible total weight: 3,500 kg Unladen weight: approx. 905 kg Payload approx.: 2,595 kg (Payload specifications may vary depending on equipment and construction) Petrol-hydraulic unit including protective cover mounted in the V-drawbar Integrated ramp compartment with tensioning device and foldable license plate holder for storing loading ramps under the bed (simple retrofit of loading ramps possible) Unique, torsion-resistant longitudinal frame chassis for safe driving characteristics and high stability Closed, fully welded and hot-dip galvanized steel frame profile Continuous heavy-duty steel floor across the entire vehicle width Maintenance support for securing the tilted platform Reinforced automatic jockey wheel Maneuvering handle with practical ratchet strap holder for easy handling Load securing system for increased flexibility and efficiency in cargo securing, DEKRA certified 10 recessed lashing rings mounted in the steel floor Lashing rings on and under the loading area, each loadable up to 1,500 kg and 360° rotatable Side panels completely foldable and removable Rear panel with steel cladding foldable including anti-slip safety for loading ramps Robust angled toggle catches on the side panels 4 plug-in steel corner posts Lighting system with 13-pin connector and reversing light Incl. vehicle documents Possible options and accessories for this trailer: Whether mesh extension, steel extension or side panel extension – choose the right version and customize your build. Thanks to the clever KOMBILINE system, extensions can be easily combined, e.g. a mesh extension at the front and rear can be perfectly combined with a steel or side panel extension on the sides – all without extra effort. Loading ramps Prop stands Load securing net Anti-theft device Predpey I E E Ijfx Ahksc Registration of your new trailer with the vehicle licensing authority

Condition: new, Special price – Stock unit from 2022 – No initial registration! Böckmann Three-way Tipper with Electric Pump and Steel Drop Sides Manufacturer: Böckmann Model: DK-ST 3218/30 P Internal Dimensions: 3240 x 1800 x 400 mm (L.W.H.) Perm. total weight: 3,000 kg Unladen weight approx. 1,055 kg Payload approx. 1,945 kg (Payload value may vary depending on equipment and construction) Electric hydraulic pump with battery (12 V/88Ah) and emergency hand pump Cable remote control for electric pump Charging interface for battery incl. cable 14-inch tyres Automatic jockey wheel (please note: the heavy-duty automatic jockey wheel shown in the pictures is only installed on the 3.5 t version) Extra-heavy-duty hot-dip galvanized steel sidewalls 400 mm Removable steel corner stanchions Removable drop sides Track channel in the upper frame (easy retrofitting of loading ramps) Rear swing tailgate 4 stable, rattle-free lashing brackets Safety support for securing the tipper body during maintenance Folding front panel enables transport of long materials Robust angle lever locks on the sidewalls Plastic mudguards at the rear incl. mud flaps Stable phenolic plywood floor with galvanized steel plating for high point loads 2 large wheel chocks Front position lights V-drawbar Robust net hooks on the sides underneath the load area Incl. vehicle documentation Possible additional options and accessories for this trailer: Shock absorbers incl. 100 km/h road approval Mesh side extension, 3-sided, swingable, 600 mm Net hooks fitted all around on the sideboards Predpfsy I E R Rsx Ahkec Additional sidewall extension 350 mm Aluminium loading ramps with 2.7 t load capacity Toolbox mounted to the front panel or under the load deck Load securing net Flat tarpaulin in various colors

Condition: new, Three-way tipper trailer with electric pump and mesh side extension Manufacturer: Humbaur Model: HTK 3500.31 Internal dimensions: 3140 x 1750 x 1350 mm (LxWxH) Gross vehicle weight rating: 3,500 kg Unladen weight: approx. 900 kg Payload: approx. 2,600 kg (payload figures may vary depending on specification and design) Tyres: 13 inch Loading height: approx. 760 mm Mesh extension: 1,000 mm Electric hydraulic pump with wired remote control, battery, and manual emergency pump Battery and hydraulic unit with protective cover Tipping angle to rear and sides approx. 45° Robust toggle fasteners on the side panels Bolted V-drawbar with welded frame construction, hot-dip galvanized Chassis and tipping platform hot-dip galvanized Heavy-duty all-steel tipping platform, manufactured from a single piece (completely wood-free) 4-stage tipping cylinder Rear pendulum tailgate Predpfoy I Iynsx Ahkec 13-pin plug with reversing light 6 recessed lashing points integrated in platform floor, lashing force 800 kg per ring Automatic jockey wheel Integrated ramp stowage compartment for easy retrofitting with aluminum loading ramps Mud flaps Marker lights Including vehicle documents Available options and accessories for this trailer: Shock absorbers including 100 km/h certificate 600 mm aluminum side extension H-frame for transporting long materials Aluminum loading ramps with 2,800 kg load capacity per pair Net hooks mounted on side panels Load securing net Toolbox Spare wheel including holder Anti-theft device Registration of your new trailer at the motor vehicle authority

Condition: new, Three-way tipper with electric pump Manufacturer: Humbaur Model: HTK 3500.31 Internal dimensions: 3140 x 1750 x 350 mm (L x W x H) Gross vehicle weight: 3500 kg Unladen weight: approx. 900 kg Payload: approx. 2600 kg (payload may vary depending on equipment and design) Tyre size: 13 inch Loading height: approx. 760 mm Electric hydraulic pump with cable remote control, battery, and emergency hand pump Battery and hydraulic unit with cover Tipping angle rear and sides: approx. 45° Robust angle lever locks on drop sides V-drawbar bolted to welded chassis frame, hot-dip galvanized Chassis and tipping platform hot-dip galvanized Heavy-duty one-piece steel tipping platform (completely wood-free) 4-stage tipping cylinder Rear pendulum tailgate 13-pin plug with reversing light 6 flush-mounted lashing points integrated into the platform floor, lashing capacity 800 kg per ring Automatic jockey wheel Prsdpfx Ajy I Izrehkec Integrated ramp storage compartment for easy retrofitting of aluminium loading ramps Mud flaps Marker lights Including vehicle documents Available options and accessories for this trailer: Shock absorbers incl. certificate for 100 km/h approval 600 mm mesh side extensions Additional 350 mm side extension 600 mm aluminium side extension H-frame for transporting long materials Aluminium loading ramps with 2800 kg load capacity per pair Net hooks mounted on the drop sides Load securing net Toolbox Spare wheel with holder Anti-theft device Registration of your new trailer with the vehicle licensing authority

Condition: new, Three-way tipper with steel side wall extension Manufacturer: Unsinn Model: UDK-B 3617-35-14 Loading area dimensions: 3660 x 1750 x 1100 mm (L x W x H) Gross vehicle weight rating: 3,500 kg Unladen weight: 985 kg Payload: 2,515 kg (Payload may vary depending on equipment and design) Tyres: 185 R14 C Steel side wall extension: 750 mm Automatic jockey wheel Single-piece pressed steel floor extending the full width Patented load securing system with 14 lashing pins on and under the loading platform Each lashing point rated at 1,500 daN (kg), rotatable 360° Drop and fully removable side panels Rear tailgate with steel plating, foldable, including anti-slip protection for loading ramps 4 removable steel corner posts Electric pump Hand emergency pump (Pumpless System) Additional hydraulic connection for towing vehicle 2 rear working lights Lighting with 13-pin plug Reversing lights Incl. vehicle documents Pjdpsy I Nmpjfx Ahkorc Optional equipment and accessories for this trailer: - 100 km/h approval certificate - Spare wheel including bracket - Folding supports - Anti-theft device - Drawbar cover - Registration of your new trailer at the road traffic office

Condition: new, Rear tipper with hydraulic electric pump and drop-side extension Manufacturer: Cheval Liberte Debon Model: PW1.2E Lux Dimensions: approx. 3050 x 1550 x 600mm (LxWxH) Permissible gross weight: 2000 kg Unladen weight: approx. 560 kg Payload: approx. 1440 kg (payload figures may vary depending on equipment and configuration) Electrohydraulic pump including battery for tipping at the push of a button Charging port for battery charger located outside the battery box Removable aluminium side walls 300 mm drop-side extension Corner stanchions removable without tools Combination flooring: Heavy-duty phenolic-coated plywood with galvanized steel sheet Psdpfoy I Nr Sex Ahksrc H-frame (ladder rack) mounted on front wall for transporting long materials Heavy-duty tension locks Automatic jockey wheel Marker lights Chassis welded and fully hot-dip galvanized Protected lighting front and rear 6 lashing eyes (3 per side) Safety support for securing the tipper body during maintenance Foldable front wall Mud flaps Front and rear gates with retaining cables for transporting longer materials Including vehicle documents Available additional options and accessories for this trailer: • Flat tarpaulin • Mesh side extension 600 mm • Load securing net • Shock absorbers incl. 100 km/h approval

Condition: new, The flexible solution, e.g. on construction sites: skip loader and tipper in one! You can roll off the skip and, for example, leave it filled with material at one location while using the main trailer/hook lift system to transport another skip. Alternatively, you can activate the tipping function and conveniently unload bulk materials at any site. Manufacturer: Vezeko Model: Konos 35 Permissible gross weight: 3,500 kg Unladen weight without skip: approx. 835 kg Payload: approx. 2,665 kg (payload may vary depending on specification and equipment) Chassis: fully welded, torsion-resistant, painted grey RAL 7015 Reinforced automatic jockey wheel Electrohydraulic operation with both radio and cable remote control options Charging cable for 12 V battery with connector Overrun brake with fully automatic reversing mechanism and parking brake Independent suspension ensures optimal driving characteristics even under heavy loads Automatic coupling with safety and wear indicator Single-stage hook lift system Hook height: 900 mm 13-pin plug Looking to significantly increase your flexibility? Equip your Konos 35 trailer with various optional skips, with or without mesh extensions, flatbeds with or without mesh extensions, or containers. This allows you to service multiple job sites with just one trailer. Optional equipment and pricing (plus VAT): - Galvanized steel roll-off skip 2470 x 1780 x 450 mm (LxWxH) with double rear wing doors – €1,895.00 - Galvanized steel roll-off skip 2470 x 1780 x 1050 mm (LxWxH) with double rear wing doors – €2,117.00 - Container/box body 2390 x 1790 x 2100 mm (LxWxH) – €5,744.00 - Storage container, galvanized sheet 2500 x 1800 x 1960 mm (LxWxH) – €3,749.00 - Flatbed 2470 x 1790 x 350 mm (LxWxH) with 3 mm steel floor and 350 mm aluminium side boards – €2,232.00 - Mesh extension for roll-off skip – 550 mm – €755.00 - Mesh extension for roll-off skip – 800 mm – €800.00 - Mesh extension for roll-off skip – 1050 mm – €851.00 - Side board extension for roll-off skip – 550 mm FE – €1,018.00 - Flat tarpaulin for roll-off skip – €245.00 Pjdpsy I Nzmjfx Ahksrc - Mesh extension for flatbed – 550 mm – €755.00 - Mesh extension for flatbed – 800 mm – €800.00 - Mesh extension for flatbed – 1050 mm – €851.00 - Side board extension for flatbed – 350 mm AL – €707.00 - Flat tarpaulin for flatbed – €245.00 Further options: - Load securing nets for skip and/or flatbed including robust net hooks are available separately - Custom painting of hook lift system in other RAL colours possible (special order, please inquire for delivery times) - Anti-theft device - We can handle the vehicle registration on your behalf (at additional cost)

Condition: new, Skip for hook lift device Konos Tridem Internal dimensions: approx. 2970 x 1780 x 575 mm (L x W x H) Unladen weight: approx. 470 kg Prodpsy I Nz Hsfx Ahkoc Volume: approx. 3.40 m³ Completely made of galvanized steel Rear wing doors with container lock Possible additional options and accessories for this skip: Net hooks Container net Lashing eyes

Condition: new, Böckmann Rear Tipper - ECO - Special Model - No hidden costs with us! Freight and vehicle registration documents are included in the sales price! - Manufacturer: Böckmann Model: RK-AL 3016/27 Eco Internal dimensions: 3,060 x 1,650 x 300 mm (LxWxH) Gross vehicle weight: 2,700 kg Unladen weight: 725 kg Payload approx. 1,925 kg (payload figures may vary depending on equipment and configuration) Hand pump Automatic jockey wheel Freely projecting drawbar length: 1,200 mm Safety prop for securing the tipping bridge during maintenance Combination floor (durable phenolic plywood floor panel with galvanized steel sheet) enables high point loads Detachable side panels Removable corner stanchions Robust cam locks on the side panels 4 heavy-duty, rattle-free lashing eyes Foldable front panel allows for transportation of longer materials Plastic mudguards at the rear including mud flaps Front marker lights V-drawbar Prodpfxjy I Rhuo Ahkoc Solid net hooks located along the side beneath the loading platform Coupling head with collision protection Incl. registration documents Available additional options and accessories for this trailer: - 13" tires instead of 14" for reduced loading height - Shock absorbers incl. 100 km/h approval - 600 mm mesh sides - Retractable aluminum loading ramps - Additional 350 mm side extension - Rear crank supports - Hydraulic connection for tractor - Registration of your new trailer at the vehicle licensing office

Condition: used, empty load weight: 3,100 kg, maximum load weight: 7,400 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 10/2004, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 400 mm, suspension: steel, tire size: 235/75R17.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underride guard, front supports, rear supports, storage box, swing-open tailgates, drawbar with adjustable height. Body: Tandem 3-sided tipper trailer with loading ramps, 2x BPW axles, drum brakes! Prodpsztrw Sefx Ahkoc Loading ramps available for an additional charge of €990.00 net! Loading height approx. 900mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, maximum load weight: 20,050 kg, overall weight: 27,000 kg, axle configuration: 3 axles, first registration: 11/2022, Year of construction: 2022, Equipment: ABS, Ressenig AHKI3.311 three-way tipper with electric tarpaulin Condition: the trailer is almost like new. Pedpfxjzuii Ie Ahkerc Tires: 385/65 R 22.5, 98% tread, on aluminum rims. If you have any further questions, please do not hesitate to contact us.

Condition: new, empty load weight: 972 kg, maximum load weight: 2,315 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 4,100 mm, loading space width: 2,100 mm, loading space height: 350 mm, loading space volume: 3.4 m³, color: other, construction height: 1,460 mm, working width: 2,280 mm, Manufacturer: Humbaur Type: 3-way tipper HTK Alu 3500.41 Permissible total weight: 3500 kg Payload: 2315 kg Unladen weight: 1185 kg Box dimensions: 4100 x 2100 x 350 mm Tire size: 13 inches Loading height: 760 mm Loading area with hand pump and electric pump, hydraulically tippable Tipping angle, rear: 45 degrees, side: 45 degrees with aluminum side board extension 350 mm - V-drawbar, hot-dip galvanized - Chassis and tipping platform, hot-dip galvanized - Tipping platform made of steel, manufactured in one piece - 4-stage, hard-chrome plated tipping cylinder - Hand pump, from 3000 kg permissible total weight, electric pump with hand pump Pjdpfx Ahjflw Sbokorc - 13-pole plug and reversing light - Aluminum side boards, 350 mm high, completely removable - Rear flap, hinged - 8 lashing rings mounted on the platform floor, tensile force 800 kg per lashing ring, DEKRA tested - Support wheel - Plank holder as preparation for aluminum planks for easy retrofitting Price includes vehicle registration document (registration certificate Part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup, Humbaur, Hapert, Brian James Trailers, Unsinn and Neptun On request, we will provide you with a free transfer license plate. We repair trailers of all manufacturers. Other accessories available on request. Subject to technical changes, price changes and errors. No liability is accepted for errors and printing errors. Reversing automation, rubber suspension axle, single-wheel suspension, loading area tippable, support wheel, marker lights, chassis and tipping platform hot-dip galvanized, braked, including warranty, V-drawbar hot-dip galvanized, tipping platform made of steel, manufactured in one piece, 4-stage, hard-chrome plated tipping cylinder, hand pump, from 3000 kg permissible total weight, electric pump with hand pump, 13-pole plug and reversing light, aluminum side boards 350 mm high, completely removable, rear flap hinged, 8 lashing rings mounted on the platform floor, tensile force 800 kg per lashing ring, DEKRA tested, plank holder as preparation for aluminum planks for easy retrofitting.

Condition: new, maximum load weight: 9,210 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,050 mm, loading space width: 2,420 mm, loading space height: 450 mm, total width: 2,550 mm, total height: 1,500 mm, Year of construction: 2026, * Humbaur Three-way Tipper * HTK 10 50 24 * New vehicle * Year of manufacture: 2026 * Gross weight: 11,900 kg * Payload: 8,750 kg * Unladen weight: 3,150 kg * Overall dimensions: 7,170 x 2,550 x 1,500 mm * Platform dimensions: 5,035 x 2,420 x 500 mm * Steel side walls: 500 mm high * Tyres: 235/75 R17.5 * Axles from renowned manufacturers * Maintenance-free parabolic suspension with load compensation * Tyres as per manufacturer's choice * Tyre pressure monitoring system (TPMS) incl. auto-locate * BRAKING SYSTEM * EBS braking system compliant with ECE regulations * 2 color-coded coupling heads red/yellow ISO 1728 * Spring-loaded parking brake * ELECTRICS * 24-volt lighting system with LED multi-chamber rear lights and flashing LED side marker lights * 15-pin connector for lighting * DRAWBAR * Hot-dip galvanized drawbar with bolted towing eye Ø 40 mm * Coupling height continuously adjustable via crank * CHASSIS FRAME * Robust, welded chassis frame, hot-dip galvanized * Lockable compartment with plastic rollers integrated in the frame for 2 optional loading ramps * SUPPORT SYSTEM * Reinforced 12 t gear support winch with load and quick modes * 2 telescopic folding supports left and right at the rear of the vehicle * TIPPER BODY * Platform floor made of 4 mm fine-grain steel * Reinforced platform frame, hot-dip galvanized * 4 ball-joint tipper bearings with 2 color-coded tipper bearing pins * Laser-welded quality steel side walls, 500 mm high * Side and rear walls can be folded down, removable, and swinging with centrally locked fastening * Side walls fully hot-dip galvanized * Rear stanchions galvanized and bolted * Rear wall with automatic tailgate unlock * Robust steel front wall, galvanized, foldable forwards * Side wall lifting springs on side walls * LOAD SECURING * 5 pairs of recessed lashing rings (6 t) in platform floor * HYDRAULICS * Hydraulic three-way tipper operated via the towing vehicle (max. 200 bar) * Five-stage telescopic cylinder with lift limitation and safety cables * Hydraulic quick coupling SVK BG3 as single-circuit connection * EQUIPMENT * Mudguards on front and rear axles with splash guard system * Contour marking on sides and rear * 2 wheel chocks with holder, space for single-line license plate Pedpfouzfm Djx Ahksrc !!! ATTENTION – PLEASE READ CAREFULLY !!! We expressly reserve the right of prior sale, as this item is also offered on other platforms. We strongly recommend inspection and assessment to avoid any misunderstandings about condition and suitability on the buyer's side. Viewings and tests are possible at any time by appointment and are expressly desired!!! Images are similar, may include optional accessories subject to surcharge. The stated internal dimensions are approximate. For new vehicles, additional costs for freight and documentation may apply. TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! PART EXCHANGE AND PAYMENT OF DIFFERENCE POSSIBLE!!! Display area: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday to Friday 08:30-17:00, Saturday 08:30-14:00 Over 500 new and used trailers always in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax: